asterisk

Commit Graph

Author	SHA1	Message	Date
George Joseph	9b3557e054	pjproject_bundled: Fixed various build issues * CFLAGS is now properly set when using older gcc. * All third-party pjproject targets have been removed. This fixes an issue with older libsrtp in some distros. * Manually removing the source directory now causes a rebuild. * EXTERNALS_CACHE_DIR is now properly checked. * Whitespace fixes. Change-Id: I98fec6847efc5602a9f41cb95096fd660a49fa60	9 years ago
Corey Farrell	ce4cfd2eca	Fix issues with bundled pjproject cached download. Previously when testing I had a preexisting makeopts in ASTTOPDIR. The ordering of configure.ac causes --with-externals-cache to be processed after third-party configure. In cases where the Asterisk clone is cleaned it would cause pjproject to be downloaded to /tmp. This moves processing of the externals cache and sounds cache to happen before third-party configure. This also addresses a possible issue with the third-party Makefile. If TMPDIR is set by the environment it would override the path given to --with-externals-cache. ASTERISK-26416 Change-Id: Ifab7f35bfcd5a31a31a3a4353cc26a68c8c6592d	9 years ago
George Joseph	e6b0053d75	bundled_pjproject: Add tests for programs used by the Makefile, et al. Added tests for bzip2, tar, patch, sed and nm to configure.ac. Set DOWNLOAD_TO_STDOUT to a working command line regardless of whether the download program is wget, curl or fetch. Added a 'configure.m4' file to the third-party directory which takes care of calling any third-party project setup. Had to move some pjproject_bundled stuff up in configure.ac so it was called before the third-party configure macro. The pjproject tarball is now downloaded to the externals_cache_dir if it was specified on the ./configure command line Removed regeneration of the pjproject aconfigure file. It was only needed for an old patch that no longer applies. Converted the tests for symbols to explicit tests since we know that they're now available in the bundled version. Saves a little time during configure. ASTERISK-26416 #close Reported-by: Corey Farrell Change-Id: Id1d94251c0155f8dd41b7de7067f35cfbaafbb9b	9 years ago
Kevin Harwell	2449d2877c	Remove "format_ogg_opus: New format" This reverts commit `40aa28131b`. ASTERISK-26426 #close Change-Id: I81e55c3c512f1dd6f49896f0c6b97a07d74fd8f5	9 years ago
George Joseph	44c0c51cf1	format_ogg_opus: New format Add Ogg/Opus playback support. This uses libopusfile in order to be able to read .opus files and play them back. Writing/recording support is not present at this time. ASTERISK-26409 Change-Id: I8815d23345108d8ca7c0bd640f6a1ce6b4f56955	9 years ago
Tzafrir Cohen	36092ee3a0	sd_notify (systemd status notifications) support sd_notify() is used to notify systemd of changes to the status of the process. This allows the systemd daemon to know when the process finished loading (and thus only start another program after Asterisk has finished loading). To use this, use a systemd unit with 'Type=notify' for Asterisk. This commit also adds the function ast_sd_notify(), a wrapper around sd_notify that does nothing if not built with systemd support. Also adds support for libsystemd detection in the configure script. Change-Id: Ied6a59dafd5ef331c5c7ae8f3ccd2dfc94be7811 (cherry picked from commit `07b95f7c65`)	9 years ago
zuul	8925367291	Merge "res_pjsip_session: segfault on already disconnected session" into 13	9 years ago
George Joseph	117a7741c8	build: Add download capability for external packages The DPMA and g729a, silk, siren7 and siren14 codecs hosted at http://downloads.digium.com/pub/telephony/ are now listed in the "External" sections of the "Resource Modules" and "Codec Translators" pages in menuselect. Any that are selected will automatically be downloaded and installed when "make install" is run. Their LICENSE and README (if avaialble) files will be installed to ASTVARLIBDIR/documentation/thirdparty/<product_name>. Example use with codecs: The codecs/codecs.xml file is a menuselect style xml file that lists the codecs to be included. Their support levels are 'external', which triggers the download and install, and defaultenabled is no. Also because codec_g729a is actually in a directory named codec_g729 on the download server, the newly added 'member_data' element is used to override the default of the directory name being the package name. You can use the 'directory_name' attribute to keep default base URL (http://downloads.digium.com/pub/telephony/) but use the new directory, or you use the 'remote_url' attribute to specify a full URL to the download directory. In this case, you must still follow the same subdirectory naming conventions as that used for the packages located at 'http://downloads.digium.com/pub/telephony'. A new configure option '--with-externals-cache' was added and like '--with-sounds-cache' it allows the installer to cache tarballs so they're not downloaded every time. To assist with the download and install process, each external package now has a manifest.xml file that, among other things, contains a package version and checksums for each file in the tarball. The manifest is saved to both the cache directory and ASTMODDIR and together with the manifest.xml on the downloads site, tells the install scripts whether a download and/or update is needed. bash and xmlstarlet are required for downloader operation. If they're not installed, the external items in menuselect will be unavailable. Change-Id: Id3dcf1289ffd3cb0bbd7dfab3cafbb87be60323a	9 years ago
Alexei Gradinari	9bca895469	res_pjsip_session: segfault on already disconnected session On heavy loaded system the TCP/TLS incoming calls could be disconnected by pjproject while these calls are being processed by asterisk which could use the session's memory pools. If the session in the disconnected state then the session memory pools were already freed, so we get segfault. This patch adds a lifetime control on an INVITE session to pjproject. The lifetime of the session is manipulated by calling pjsip_inv_add_ref/pjsip_inv_dec_ref. This patch uses these functions to inform pjproject that the session is in use. This patch adds check if the session state is not disconnected and also checks if the memory pool is not NULL. This patch also places tasks 'session_end' and 'session_end_completion' into session's serializer to avoid race condition. ASTERISK-26291 #close Change-Id: I4d28b1fb3b91f0492a911d110049d670fdc3c8d7	9 years ago
Alexander Traud	56e0aed177	BuildSystem: Detect ca_list_path capabilities in external PJProject. Since Asterisk 13.8, pj_ssl_cert_load_from_files2 got detected only in the bundled PJProject but not in an external PJProject. Therefore, ca_list_path could not be used in pjsip.conf. With this change, pj_ssl_cert_load_from_files2 is detected again to enable ca_list_path again. ASTERISK-26303 #close Change-Id: I4a4a0cdc5cdff33730911fb4cfc0498c069043d0	9 years ago
Corey Farrell	7fdf7c3d4c	Add conditional support for noreturn functions. This adds support for tagging functions with the noreturn attribute. If DO_CRASH is enabled then ast_do_crash never returns. If AST_DEVMODE and DO_CRASH are enabled then failed assertions never return. This can resolve a large number of false positives with static analyzers. ASTERISK-26220 #close Change-Id: Icfb61e5fe54574eced4c3e88b317244f467ec753	9 years ago
zuul	64a09963be	Merge "BuildSystem: Avoid obsolete warning with pthread.m4 on autoconf." into 13	9 years ago
Alexander Traud	332beb27d8	res_rtp_asterisk: Enable Forward Secrecy (PFS) for DTLS. Since July 2014, TLS based protocols (SIP over TLS, Secure WebSockets, HTTPS) support PFS thanks to ASTERISK-23905. In July 2015, the same feature was added for DTLS. The source code from main/tcptls.c should have been re-used to ease security audits. Therefore, this change rolls back the change from July 2015 and re-uses the code from July 2014. This has the additional benefits to work under CentOS 7 and enabling not just ECDHE but DHE based cipher suites as well. ASTERISK-25659 #close Reported by: StefanEng86, urbaniak, pay123 Tested by: sarumjanuch, traud patches: res_rtp_asterisk.patch submitted by sarumjanuch dtls_centos_step_1.patch submitted by traud dtls_centos_step_2.patch submitted by traud Change-Id: I537cadf4421f092a613146b230f2c0ee1be28d5c	9 years ago
Alexander Traud	148cd1b319	BuildSystem: Avoid obsolete warning with pthread.m4 on autoconf. Updated the macro-set autoconf/ax_pthread.m4 to its latest upstream version. ASTERISK-26046 #close Change-Id: I11abc11d17acd2b6a8a5a5be8ae8e0949dab9cc7	9 years ago
zuul	08f5f10f8f	Merge "BuildSystem: Allow own CFLAGS on ./configure." into 13	9 years ago
Alexander Traud	3be6fa1e4b	BuildSystem: Allow own CFLAGS on ./configure. Before this change, make failed with the error Unknown value '' found in build_tools/menuselect-deps for NATIVE_ARCH when CFLAGS were supplied to the configure script. This was introduced with <https://reviewboard.asterisk.org/r/1852/> which disabled BUILD_NATIVE when CFLAGS were supplied. Those who need different -march= values, please, go for ./configure make menuselect.makeopts or make menuselect ./menuselect/menuselect --disable BUILD_NATIVE ASTERISK-25289 #close Change-Id: Ic6365d5a97bb9b3556858f06432a8d1cfa83eebc	9 years ago
Alexander Traud	a1bd57884d	BuildSystem: Avoid obsolete warning with libcurl.m4 on autoconf. Updated the macro-set autoconf/libcurl.m4 to its latest upstream version. This avoids a warning about an obsolete macro on AC_HELP_STRING, because Asterisk is using AS_HELP_STRING everywhere else already. ASTERISK-26046 Change-Id: I8299faf504ceaeee3e39930c59293809e116c631	9 years ago
George Joseph	43a78100c0	configure: Fix HAVE_PJSIP_EVSUB_GRP_LOCK not set with external pjproject There was a typo in configure.ac preventing HAVE_PJSIP_EVSUB_GRP_LOCK from getting set when using an external pjproject. ASTERISK-26099 #close Reported-by: Ross Beer Change-Id: I709af70428e125fb5ccd44b171d25dd29141f0ae	9 years ago
Alexander Traud	5f0a098243	BuildSystem: Avoid obsolete warning with AC_TYPE_SIGNAL on autoconf. Removed the obsolete macro AC_TYPE_SIGNAL because Asterisk does not use K&R C but requires ANSI C anyway. ASTERISK-26046 Change-Id: I914c014385e1862102d90fe7650621def78db02e	9 years ago
Alexander Traud	e30602587c	BuildSystem: Avoid obsolete warning with AC_FUNC_SETVBUF_REVERSED on autoconf. Removed the obsolete macro AC_FUNC_SETVBUF_REVERSED because Asterisk does not support the platform SVR2 from the year 1987 anymore. ASTERISK-26046 Change-Id: I28161b037feb2d29ab46ed20e785928460226c22	9 years ago
George Joseph	6a568bcc66	res_pjsip_pubsub: Address SEGV when attempting to terminate a subscription Occasionally under load we'll attempt to send a final NOTIFY on a subscription that's already been terminated and a SEGV will occur down in pjproject's evsub_destroy function. This is a result of a race condition between all the paths that can generate a notify and/or destroy the underlying pjproject evsub object: * The client can send a SUBSCRIBE with Expires: 0. * The client can send a SUBSCRIBE/refresh. * The subscription timer can expire. * An extension state can change. * An MWI event can be generated. * The pjproject transaction timer (timer_b) can expire. Normally when our pubsub_on_evsub_state is called with a terminate, we push a task to the serializer and return at which point the dialog is unlocked. This is usually not a problem because the task runs immediately and locks the dialog again. When the system is heavily loaded though, there may be a delay between the unlock and relock during which another event may occur such as the subscription timer or timer_b expiring, an extension state change, etc. These may also cause a terminate to be processed and if so, we could cause pjproject to try to destroy the evsub structure twice. There's no way for us to tell that the evsub was already destroyed and the evsub's group lock can't tolerate this and SEGVs. The remedy is twofold. * A patch has been submitted to Teluu and added to the bundled pjproject which adds add/decrement operations on evsub's group lock. * In res_pjsip_pubsub: * configure.ac and pjproject-bundled's configure.m4 were updated to check for the new evsub group lock APIs. * We now add a reference to the evsub group lock when we create the subscription and remove the reference when we clean up the subscription. This prevents evsub from being destroyed before we're done with it. * A state has been added to the subscription tree structure so termination progress can be tracked through the asyncronous tasks. * The pubsub_on_evsub_state callback has been split so it's not doing double duty. It now only handles the final cleanup of the subscription tree. pubsub_on_rx_refresh now handles both client refreshes and client terminates. It was always being called for both anyway. * The serialized_on_server_timeout task was removed since serialized_pubsub_on_rx_refresh was almost identical. * Missing state checks and ao2_cleanups were added. * Some debug levels were adjusted to make seeing only off-nominal things at level 1 and nominal or progress things at level 2+. ASTERISK-26099 #close Reported-by: Ross Beer. Change-Id: I779d11802cf672a51392e62a74a1216596075ba1	9 years ago
Matt Jordan	37214b0bdf	configure: Fix errors with AST_UNDEFINED_SANITIZER/AST_LEAK_SANITIZER When running on a system that does not support or use AST_UNDEFINED_SANITIZER or AST_LEAK_SANITIZER, the configure script would incorrectly set those constants to a blank value, e.g., 'AST_UNDEFINED_SANITIZER='. This would cause menuselect to error out, complaining that a blank value is not a valid option. This patch corrects the issue by setting the value to 0 if the options that those constants enable/disable is not found. Change-Id: Ib39814aaf940f308d500c1e026edb3d70de47fba	9 years ago
George Joseph	2a7130b8b0	pjproject_bundled: Check for python-dev and TEST_FRAMEWORK The pjsua and pjsystest apps are now built only if TEST_FRAMEWORK is set. The python bindings are now built only if TEST_FRAMEWORK is set and a python development package is installed. libresample was also disabled. ASTERISK-25993 #close Reported-by: Joshua Colp Change-Id: If4e91c503a02f113d5b71bc8b972081fa3ff6f03	9 years ago
George Joseph	f39089f17c	pjproject_bundled: Various fixes discovered during testing of OSes For all OSes: * Disabled third-party codecs in pjproject and added '--disable-speex-codec --disable-speex-aec --disable-gsm-codec' to the configure options since we don't use the pjsip codec capability. FreeBSD: * Added FreeBSD support to install_prereq. * Changed pjproject/configure.m4 to use $GNU_MAKE instead of hardcoding "make". * Added __progname and environ to asterisk.exports.in. * Reverted the use of ldconfig to create shared library symlinks to ln. * Only enable epoll in pjproject if `uname -s` is Linux. * Added a patch to pjproject to take the name of the 'make' command from an environment variable if supplied. This is needed for the python bindings. (merged by Teluu into pjproject trunk 5/3/2016) FreeBSD support isn't complete. Still some general issues regarding make/gmake having nothing to do with pjproject. With some handholding it DOES build successfully. CentOS: Added 'patch' and 'bzip2' to install_prereq PACKAGES_RH. CentOS 6/7 32/64 build and run the pjsip testsuite successfully. Ubuntu: No changes required. Ubuntu 15/16 32/64 build and run the pjsip testsuite successfully. Debian: No changes required. Debian 6/7/8 32/64 build and run the pjsip testsuite successfully. There will utimately be a follow-up patch to create an install_prereq for the testsuite as I've discovered a few missing requirements. ASTERISK-25968 #close Change-Id: I5756a07facfc63798115a5e73a8709382fe9259c	9 years ago
George Joseph	d963a33749	pjproject-bundled: Cleanups for reported issues PortAudio should no longer be required PJSIP_MAX_PKT_LEN is now 6000 Older autoconf issue fixed. (CentOS 6) Change-Id: I463fa9586cbe7c6b3b603289f535bd8e361611dd	9 years ago
Joshua Colp	677a65fcbb	build: Add configure check for proto field of PJSIP TLS transport setting. Older versions of PJSIP do not have the proto field on the TLS transport setting structure. This change adds a configure check so even if it is not present we will still be able to build. Change-Id: Ibf3f47befb91ed1b8194bf63888baa6fee05aba9	9 years ago
George Joseph	b59956a875	build-system: Allow building with static pjproject Background here: http://lists.digium.com/pipermail/asterisk-dev/2016-January/075266.html From CHANGES: * To help insure that Asterisk is compiled and run with the same known version of pjproject, a new option (--with-pjproject-bundled) has been added to ./configure. When specified, the version of pjproject specified in third-party/versions.mak will be downloaded and configured. When you make Asterisk, the build process will also automatically build pjproject and Asterisk will be statically linked to it. Once a particular version of pjproject is configured and built, it won't be configured or built again unless you run a 'make distclean'. To facilitate testing, when 'make install' is run, the pjsua and pjsystest utilities and the pjproject python bindings will be installed in ASTDATADIR/third-party/pjproject. The default behavior remains building with the shared pjproject installation, if any. Building: All you have to do is include the --with-pjproject-bundled option on the ./configure command line (and remove any existing --with-pjproject option if specified). Everything else is automatic. Behind the scenes: The top-level Makefile was modified to include 'third-party' in the list of MOD_SUBDIRS. The third-party directory was created to contain any third party packages that may be needed in the future. Its Makefile automatically iterates over any subdirectories passing on targets. The third-party/pjproject directory was created to house the pjproject source distribution. Its Makefile contains targets to download, patch configure, generate dependencies, compile libs, apps and python bindings, sanitized build.mak and generate a symbols list. When bootstrap.sh is run, it automatically includes the configure.m4 file in third-party/pjproject. This file has a macro to download and conifgure pjproject and get and set PJPROJECT_INCLUDE, PJPROJECT_DIR and PJPROJECT_BUNDLED. It also tests for the capabilities like PJ_TRANSACTION_GRP_LOCK by parsing preprocessor output as opposed to trying to compile. Of course, bootstrap.sh is only run once and the configure file is incldued in the patch. When configure is run with the new options, the macro in configure.m4 triggers the download, patch, conifgure and tests. No compilation is performed at this time. The downloaded tarball is cached in /tmp so it doesn't get downloaded again on a distclean. When make is run in the top-level Asterisk source directory, it will automatically descend all the subdirectories in third_party just as it does for addons, apps, etc. The top-level Makefile makes sure that the 'third-party' is built before 'main' so that dependencies from the other directories are built first. When main does build, a new shared library (libasteriskpj) is created that links statically to the pjproject .a files and exports all their symbols. The asterisk binary links to that, just as it does with libasteriskssl. When Asterisk is installed, the pjsua and pjsystest apps, and the pjproject python bindings are installed in ASTDATADIR/third-party/pjproject. This will facilitate testing, including running the testsuite which will be updated to check that directory for the pjsua module ahead of the system python library. Modules should continue to depend on pjproject if they use pjproject APIs directly. They should not care about the implementation. No changes to any res_pjsip modules were made. Change-Id: Ia7a60c28c2e9ba9537c5570f933c1ebcb20a3103	9 years ago
George Joseph	c1bf014ea0	res_pjsip: Handle pjsip_dlg_create_uas deprecation Pjproject has deprecated pjsip_dlg_create_uas in 2.5 and replaced it with pjsip_dlg_create_uas_and_inc_lock which, as the name implies, automatically increments the lock on the returned dialog. To account for this, configure.ac now detects the presence of pjsip_dlg_create_uas_and_inc_lock and res_pjsip.c has an #ifdef HAVE_PJSIP_DLG_CREATE_UAS_AND_INC_LOCK to decide whether to use the original call or the new one. If the new one was used, the ref count is decremented before returning. ASTERISK-25751 #close Reported-by Josh Colp Change-Id: I1be776b94761df03bd0693bc7795a75682615ca8	9 years ago
Badalyan Vyacheslav	bd07b6f0dd	Build: Added testing compiler to support the system sanitizes In older versions of the compiler was not sanitizes. Compilers other than GCC can not support the Usan and TSAN or have other options for *FLAGS. ASTERISK-25767 #close Reported by: Badalyan Vyacheslav Tested by: Badalyan Vyacheslav Change-Id: Iefce6608221fa87884b82ae3cb5649b7b1804916	9 years ago
Mark Michelson	6a799cd78f	Check for OpenSSL defines before trying to use them. The SSL_OP_NO_TLSv1_1 and SSL_OP_NO_TLSv1_2 defines did not exist prior to OpenSSL version 1.0.1. A recent commit attempts to, by default, set these options, which can cause problems on systems with older OpenSSL installations. This commit adds a configure script check for those defines and will not attempt to make use of those if they do not exist. We will print a warning urging the user to upgrade their OpenSSL installation if those defines are not present. Change-Id: I6a2eb9a43fd0738b404d8f6f2cf4b5c22d9d752d	9 years ago
Corey Farrell	6ff945ab87	Build System: Add support for checking alembic branches. * Add 'check-alembic' target to root Makefile. * Create build_tools/make_check_alembic to do the actual checks. ASTERISK-25685 Change-Id: Ibb3cae7d1202ac23dc70b0f3b5801571ad46b004	9 years ago
Mark Duncan	aed068844c	res/res_rtp_asterisk: Add ECDH support This will add ECDH support to Asterisk. It will detect auto ECDH support in OpenSSL (1.0.2b and above) during ./configure. If this is available, it will use it, otherwise it will fall back to prime256v1 (this behavior is consistent with other projects such as Apache and nginx). This fixes WebRTC being broken in Firefox 38+ due to Firefox now only supporting ciphers with perfect forward secrecy. ASTERISK-25265 #close Change-Id: I8c13b33a2a79c0bde2e69e4ba6afa5ab9351465b	10 years ago
ibercom	3046bc17ed	weakref attribute detection broken with gcc 4.6 and higher GCC 4.7 Manual: http://gcc.gnu.org/onlinedocs/gcc-4.7.4/gcc/Function-Attributes.html weakref ("target") A weak reference is an alias that does not by itself require a definition to be given for the target symbol. ASTERISK-22559 #close Reported by: Ibercom Change-Id: I36a136cae947b65187a697533416f9ff9a0b8cdf	10 years ago
Diederik de Groot	9c3ed42875	Update configure.ac/Makefile for clang Created autoconf/ast_check_raii.m4: contains AST_CHECK_RAII which checks compiler requirements for RAII: gcc: -fnested-functions support clang: -fblocks (and if required -lBlocksRuntime) The original check was implemented in configure.ac and now has it's own file. This function also sets C_COMPILER_FAMILY to either gcc or clang for use by makefile Created autoconf/ast_check_strsep_array_bounds.m4 (contains AST_CHECK_STRSEP_ARRAY_BOUNDS): which checks if clang is able to handle the optimized strsep & strcmp functions (linux). If not, the standard libc implementation should be used instead. Clang + the optimized macro's work with: strsep(char , char []), but not with strsepo(char , char *). Instead of replacing all the occurences throughout the source code, not using the optimized macro version seemed easier See 'define __strcmp_gc(s1, s2, l2) in bits/string2.h': llvm-comment: Normally, this array-bounds warning are suppressed for macros, so that unused paths like the one that accesses __s1[3] are not warned about. But if you preprocess manually, and feed the result to another instance of clang, it will warn about all the possible forks of this particular if statement. Instead of switching of this optimization, another solution would be to run the preproces- sing step with -frewrite-includes, which should preserve enough information so that clang should still be able to suppress the diag- nostic at the compile step later on. See also "https://llvm.org/bugs/show_bug.cgi?id=20144" See also "https://llvm.org/bugs/show_bug.cgi?id=11536" Makefile.rules: If C_COMPILER_FAMILY=clang then add two warning suppressions: -Wno-unused-value -Wno-parentheses-equality In an earlier review (reviewboard: 4550 and 4554), they were deemed a nuisace and less than benefitial. configure.ac: Added AST_CHECK_RAII() see earlier Added AST_CHECK_STRSEP_ARRAY_BOUNDS() see earlier Removed moved content ASTERISK-24917 Change-Id: I12ea29d3bda2254ad3908e279b7effbbac6a97cb	10 years ago
Matthew Jordan	f5bc032567	Add support for the clang compiler; update RAII_VAR to use BlocksRuntime RAII_VAR, which is used extensively in Asterisk to manage reference counted resources, uses a GCC extension to automatically invoke a cleanup function when a variable loses scope. While this functionality is incredibly useful and has prevented a large number of memory leaks, it also prevents Asterisk from being compiled with clang. This patch updates the RAII_VAR macro such that it can be compiled with clang. It makes use of the BlocksRuntime, which allows for a closure to be created that performs the actual cleanup. Note that this does not attempt to address the numerous warnings that the clang compiler catches in Asterisk. Much thanks for this patch goes to: * The folks on StackOverflow who asked this question and Leushenko for providing the answer that formed the basis of this code: http://stackoverflow.com/questions/24959440/rewrite-gcc-cleanup-macro-with-nested-function-for-clang * Diederik de Groot, who has been extremely patient in working on getting this patch into Asterisk. Review: https://reviewboard.asterisk.org/r/4370/ ASTERISK-24133 ASTERISK-23666 ASTERISK-20399 ASTERISK-20850 #close Reported by: Diederik de Groot patches: RAII_CLANG.patch uploaded by Diederik de Groot (License 6600) ........ Merged revisions 432807 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432808 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago
Matthew Jordan	474fec4f92	configure: Promote SQLite3 "not installed" warning to error Since Asterisk won't build without the library, not having it is definitely an error. Thanks to Kyle Kurz for pointing this out. ........ Merged revisions 432280 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432281 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago
David M. Lee	702d79de2a	Various fixes for OS X This patch addresses compilation errors on OS X. It's been a while, so there's quite a few things. * Fixed __attribute__ decls in route.h to be portable. * Fixed htonll and ntohll to work when they are defined as macros. * Replaced sem_t usage with our ast_sem wrapper. * Added ast_sem_timedwait to our ast_sem wrapper. * Fixed some GCC 4.9 warnings using sigset() functions. Fixed some format strings for portability. * Fixed compilation issues with res_timing_kqueue (although tests still fail on OS X). * Fixed menuconfig /sbin/launchd detection, which disables res_timing_kqueue on OS X). ASTERISK-24539 #close Reported by: George Joseph ASTERISK-24544 #close Reported by: George Joseph Review: https://reviewboard.asterisk.org/r/4327/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431092 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago
Mark Michelson	8bc4a89e1f	Add support for the ca_list_path option for PJSIP transports. This allows for a path to be specified that has a collection of CA certificates in it. ASTERISK-24575 #close Reported by cloos Patches: pj-ca-path-trunk.diff uploaded by cloos (License #5956) Review: https://reviewboard.asterisk.org/r/4344 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430709 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	f6630e2481	configure: If cross-compiling, assume we have working semaphores The Asterisk 13 configure.ac checks for HAS_WORKING_SEMAPHORE but does not have an option for cross-compiling so it fails with an exit. Since we're cross- compiling, we can't exactly go looking for the header. The semaphore.h header is relatively common: * It's part of the POSIX standard * It's part of GNU C Library As such, we assume that it will be present when cross-compiling. As such, this patch defaults "HAS_WORKING_SEMAPHORE" to "1" if cross-compiling is detected. If you're cross-compiling to a platform that doesn't support this, then make sure you re-define this to 0. ASTERISK-24663 #close Reported by: abelbeck patches: asterisk-13-anonymous-semaphores.patch uploaded by abelbeck (License 5903) git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430646 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	056f11ac65	chan_pjsip: Add configure check for 'pjsip_get_dest_info' function. The 'pjsip_get_dest_info' function is used to determine if the signaling transport of the dialog is secure or not. This function was added in PJSIP 2.3 and does not exist in earlier versions. This configure check allows Asterisk to build and run with older versions at the loss of the 'secure' argument for the PJSIP CHANNEL dialplan function. Usage of this argument will require upgrading to PJSIP 2.3. ASTERISK-24665 #close Reported by: Mark Michelson Review: https://reviewboard.asterisk.org/r/4329/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430546 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Sean Bright	88d9d3f1fc	configure: Add autoconf check for libopus. Because opus transcoding support cannot be included in the standard Asterisk distribution, a few codec_opus implementations have popped up. To make it easier for people to drop in opus support in their own installations, this patch adds configure checks for libopus. Review: https://reviewboard.asterisk.org/r/4106/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@426234 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
George Joseph	cb31a8aa7a	build: Force -fsigned-char on platforms where the default for char is unsigned gcc on the ARM platform defaults 'char' to 'unsigned char' whereas Intel and SPARC default to 'signed char'. This is only an issue in the rare cases where negative values are assigned to a 'char' but this this patch insures compatibility by detecting platforms that default to 'unsigned' and adding an '-fsigned-char' flag to _ASTCFLAGS. If compiling for ARM (native or cross-compile) be sure to run ./bootstrap.sh and ./configure to regenerate the build files. You shouldn't have to do this for Intel or SPARC. Tested-by: George Joseph Review: https://reviewboard.asterisk.org/r/4091/ ........ Merged revisions 425964 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@425965 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	524cb990a3	configure: Undefine FORTIFY_SOURCE prior to defining it for patched gcc Some distributions of Linux patch gcc to define FORTIFY_SOURCE when gcc is executed with optimization. This "help" unfortunately results in re-definition warnings when FORTIFY_SOURCE is later defined in Asterisk's build system. This patch undefines FORTIFY_SOURCE prior to defining it to prevent this warning. Review: https://reviewboard.asterisk.org/r/3912/ ASTERISK-24032 #close Reported by: Kilburn Tested by: Kilburn, wdoekes patches: 1.8.diff uploaded by cloos (License 5956) 10.diff uploaded by cloos (License 5956) 11.diff uploaded by cloos (License 5956) 12.diff uploaded by cloos (License 5956) 13.diff uploaded by cloos (License 5956) ........ Merged revisions 421227 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 421228 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 421229 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@421230 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Sean Bright	7677d564e7	Fix build when pjproject is installed in a non-standard location. When configuring Asterisk to build against a version of pjproject installed in a non-standard location, the checks for "PJSIP Transaction Group Lock Support" and "PJSIP Media Stream Replacement Support" fail. This is because these secondary checks are not taking the CFLAGS and LIBS returned by the pkg-config check into account. Review: https://reviewboard.asterisk.org/r/3830 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419077 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	3f64ca0c04	configure: Fix libxml2 development library dependency checking The commit that added libxml2 support didn't fully check for the libxml2 development script in the Asterisk configure file. As a result, Asterisk could be configured, then fail on menuselect. This patch fixes it so that Asterisk should detect the libxml2 dependency failure first. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418850 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	26c7e684ea	menuselect: Add libxml2 support (Patch 3) This is the final patch in adding menuselect to Asterisk. - The first patch (r418832) added menuselect along with mxml - The second patch (r418833) removed mxml from menuselect This patch adds support for libxml2 to menuselect, and makes libxml2 a required library for Asterisk. Note that the libxml2 portion of this patch was written by Sean Bright, and was made available on a team branch: http://svn.digium.com/svn/menuselect/team/seanbright/libxml2/ Review: https://reviewboard.asterisk.org/r/3773/ ASTERISK-20703 #close patches: some_mysterious_team_branch uploaded by seanbright (License 5060) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418834 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	0e844b7598	configure: Remove last vestiges of h323; DO create menuselect-deps The previous patch (r418034) fixed the 'glitch' that the channels/h323 Makefile no longer existed. Unfortunately, removing the entire line was a bit of a blunder, as it meant that build_tools/menuselect-deps was never generated. Hilarity ensued when actually trying to compile. But hey! At least configure worked. This patch fixes that glitch, and removes some more of the vestiges of h323. (It had tendrils in the main Makefile? Crazy.) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418035 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	46b00b9c64	configure: Update script to pass if channels/h323/Makefile.in does not exist This simply removes that check from the configure script, as r418019 removed chan_h323. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418034 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	758b13858b	main/tcptls: Add checks for OpenSSL Elliptic Curve support The patch for ASTERISK-23905 that added PFS support in Asterisk depends on the elliptic curve library support being present in OpenSSL. As it turns out, some versions of OpenSSL don't have this library - notably the version running on our build agents. This patch fixes the build by providing a configure check for the specific library calls that the PFS patch relies on. Review: https://reviewboard.asterisk.org/r/3709/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417900 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
George Joseph	1a6db55404	build: Allow autoconf/ast_ext_tool_check to handle cross-compiling better. ast_ext_tool_check.m4 isn't handling cases where a path to a package is provided (E.G. --with-mysqlclient=/some/sysroot) and the package has a config tool (E.G. mysql_config) and the package has its own subdirectories in include or lib. For example, mysql's libraries are in ${MYSQLCLIENT_DIR}/usr/lib/mysql but ast_ext_tool_check sets MYSQLCLIENT_LIB to ${MYSQLCLIENT_DIR}/usr/lib. libxml2 has the same problem with its includes. They're in ${LIBXML2_DIR}/usr/include/libxml2 not directly in ${LIBXML2_DIR}/usr/include. Both cause configure to fail and there are others in the same boat. The problem is caused by logic in ast_ext_tool_check that overrides the result of the config tool's --cflags and --libs options if package_DIR is set. This patch prepends package_DIR (if specified) to the -L and -I results from the package's config tool instead of overriding them. A regenerated ./configure and include/asterisk/autoconfig.h.in are included but can be regenerated by running ./bootstrap.sh at any time. Tested by: George Joseph Tested by: Matt Jordan Review: https://reviewboard.asterisk.org/r/3550/ ........ Merged revisions 416929 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 416930 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 416931 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@416935 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago

1 2 3 4 5 ...

530 Commits (6be5d8de0da7e804544507f70382425af9a07b3f)