asterisk

Commit Graph

Author	SHA1	Message	Date
Richard Mudgett	da68b185b3	res_pjsip_registrar_expire.c: Remove extra linefeed in debug message. Change-Id: I1f9adb911f23376503396ec8867e8005b755eb94	9 years ago
Richard Mudgett	e1248c3075	res_pjsip: Make aor named lock a mutex. The named aor lock was always being locked for writes so a rwlock adds no benefit and may be slower because rwlocks are biased toward read locking. Change-Id: I8c5c2c780eb30ce5441832257beeb3506fd12b28	9 years ago
George Joseph	fe7e48db03	res_pjsip contact: Lock expiration/addition of contacts Contact expiration can occur in several places: res_pjsip_registrar, res_pjsip_registrar_expire, and automatically when anyone calls ast_sip_location_retrieve_aor_contact. At the same time, res_pjsip_registrar may also be attempting to renew or add a contact. Since none of this was locked it was possible for one thread to be renewing a contact and another thread to expire it immediately because it was working off of stale data. This was the casue of intermittent registration/inbound/nominal/multiple_contacts test failures. Now, the new named lock functionality is used to lock the aor during contact expire and add operations and res_pjsip_registrar_expire now checks the expiration with the lock held before deleting the contact. ASTERISK-25885 #close Reported-by: Josh Colp Change-Id: I83d413c46a47796f3ab052ca3b349f21cca47059	10 years ago
Joshua Colp	901e8d78c4	res_pjsip_registrar_expire: Fix race condition at shutdown. When shutting down, the PJSIP sorcery is destroyed. The registrar expiration module queries the PJSIP sorcery to determine what to expire. As there was no synchronization between termination of the expiration thread and the unloading of the module it was possible for the thread to try to access the PJSIP sorcery after it had been destroyed. This change ensures that the thread is shut down before allowing the module to be considered unloaded. Change-Id: I69fd239edbaaf160c2d37ae00d3ac06e5596fe8b	10 years ago
George Joseph	5aa5c49413	sorcery/res_pjsip: Refactor for realtime performance There were a number of places in the res_pjsip stack that were getting all endpoints or all aors, and then filtering them locally. A good example is pjsip_options which, on startup, retrieves all endpoints, then the aors for those endpoints, then tests the aors to see if the qualify_frequency is > 0. One issue was that it never did anything with the endpoints other than retrieve the aors so we probably could have skipped a step and just retrieved all aors. But nevermind. This worked reasonably well with local config files but with a realtime backend and thousands of objects, this was a nightmare. The issue really boiled down to the fact that while realtime supports predicates that are passed to the database engine, the non-realtime sorcery backends didn't. They do now. The realtime engines have a scheme for doing simple comparisons. They take in an ast_variable (or list) for matching, and the name of each variable can contain an operator. For instance, a name of "qualify_frequency >" and a value of "0" would create a SQL predicate that looks like "where qualify_frequency > '0'". If there's no operator after the name, the engines add an '=' so a simple name of "qualify_frequency" and a value of "10" would return exact matches. The non-realtime backends decide whether to include an object in a result set by calling ast_sorcery_changeset_create on every object in the internal container. However, ast_sorcery_changeset_create only does exact string matches though so a name of "qualify_frequency >" and a value of "0" returns nothing because the literal "qualify_frequency >" doesn't match any name in the objset set. So, the real task was to create a generic string matcher that can take a left value, operator and a right value and perform the match. To that end, strings.c has a new ast_strings_match(left, operator, right) function. Left and right are the strings to operate on and the operator can be a string containing any of the following: = (or NULL or ""), !=, >, >=, <, <=, like or regex. If the operator is like or regex, the right string should be a %-pattern or a regex expression. If both left and right can be converted to float, then a numeric comparison is performed, otherwise a string comparison is performed. To use this new function on ast_variables, 2 new functions were added to config.c. One that compares 2 ast_variables, and one that compares 2 ast_variable lists. The former is useful when you want to compare 2 ast_variables that happen to be in a list but don't want to traverse the list. The latter will traverse the right list and return true if all the variables in it match the left list. Now, the backends' fields_cmp functions call ast_variable_lists_match instead of ast_sorcery_changeset_create and they can now process the same syntax as the realtime engines. The realtime backend just passes the variable list unaltered to the engine. The only gotcha is that there's no common realtime engine support for regex so that's been noted in the api docs for ast_sorcery_retrieve_by_fields. Only one more change to sorcery was done... A new config flag "allow_unqualified_fetch" was added to reg_sorcery_realtime. "no": ignore fetches if no predicate fields were supplied. "error": same as no but emit an error. (good for testing) "yes": allow (the default); "warn": allow but emit a warning. (good for testing) Now on to res_pjsip... pjsip_options was modified to retrieve aors with qualify_frequency > 0 rather than all endpoints then all aors. Not only was this a big improvement in realtime retrieval but even for config files there's an improvement because we're not going through endpoints anymore. res_pjsip_mwi was modified to retieve only endpoints with something in the mailboxes field instead of all endpoints then testing mailboxes. res_pjsip_registrar_expire was completely refactored. It was retrieving all contacts then setting up scheduler entries to check for expiration. Now, it's a single thread (like keepalive) that periodically retrieves only contacts whose expiration time is < now and deletes them. A new contact_expiration_check_interval was added to global with a default of 30 seconds. Ross Beer reports that with this patch, his Asterisk startup time dropped from around an hour to under 30 seconds. There are still objects that can't be filtered at the database like identifies, transports, and registrations. These are not going to be anywhere near as numerous as endpoints, aors, auths, contacts however. Back to allow_unqualified_fetch. If this is set to yes and you have a very large number of objects in the database, the pjsip CLI commands will attempt to retrive ALL of them if not qualified with a LIKE. Worse, if you type "pjsip show endpoint <tab>" guess what's going to happen? :) Having a cache helps but all the objects will have to be retrieved at least once to fill the cache. Setting allow_unqualified_fetch=no prevents the mass retrieve and should be used on endpoints, auths, aors, and contacts. It should NOT be used for identifies, registrations and transports since these MUST be retrieved in bulk. Example sorcery.conf: [res_pjsip] endpoint=config,pjsip.conf,criteria=type=endpoint endpoint=realtime,ps_endpoints,allow_unqualified_fetch=error ASTERISK-25826 #close Reported-by: Ross Beer Tested-by: Ross Beer Change-Id: Id2691e447db90892890036e663aaf907b2dc1c67	10 years ago
Richard Mudgett	13557675d4	res_pjsip_registrar_expire.c: Made use ao2 container template routines and eliminated some RAII_VAR() usage. * Converted the contact_autoexpire container to use the ao2 template hash and cmp functions. Also made use the OBJ_SEARCH_xxx names instead of the deprecated names. * Eliminates several unnecessary uses of RAII_VAR(). Review: https://reviewboard.asterisk.org/r/4524/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433622 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	dc2cf21144	res_pjsip_registrar_expire.c: Cleanup scheduler leaks on unload/shutdown. Contact expiration object refs were leaked when the module was unloaded. * Made empty the scheduler of entries before destroying it to release the object ref held by the scheduler entry. Review: https://reviewboard.asterisk.org/r/4523/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433596 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kinsey Moore	289830cdc6	PJSIP: Enforce module load dependencies This enforces that res_pjsip, res_pjsip_session, and res_pjsip_pubsub have loaded properly before attempting to load any modules that depend on them since the module loader system is not currently capable of resolving module dependencies on its own. ASTERISK-24312 #close Reported by: Dafi Ni Review: https://reviewboard.asterisk.org/r/4062/ ........ Merged revisions 425690 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@425691 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Mark Michelson	dcf1ad14da	Add module support level to ast_module_info structure. Print it in CLI "module show" . ASTERISK-23919 #close Reported by Malcolm Davenport Review: https://reviewboard.asterisk.org/r/3802 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419592 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	3357c494cb	sorcery, bucket: Change observer remove calls to take const callbacks struct. * Make ast_sorcery_observer_remove() accept a const callbacks struct. * Make ast_sorcery_observer_remove() tolerant of the sorcery parameter being NULL. Now it can be called within a module unload routine if the sorcery initialization fails. * Fix ast_sorcery_observer_add() to fail if the container link fails. ........ Merged revisions 403324 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403327 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Mark Michelson	735b30ad71	The large GULP->PJSIP renaming effort. The general gist is to have a clear boundary between old SIP stuff and new SIP stuff by having the word "SIP" for old stuff and "PJSIP" for new stuff. Here's a brief rundown of the changes: * The word "Gulp" in dialstrings, functions, and CLI commands is now "PJSIP" * chan_gulp.c is now chan_pjsip.c * Function names in chan_gulp.c that were "gulp_" are now "chan_pjsip_" * All files that were "res_sip" are now "res_pjsip" * The "res_sip" directory is now "res_pjsip" * Files in the "res_pjsip" directory that began with "sip_" are now "pjsip_" * The configuration file is now "pjsip.conf" instead of "res_sip.conf" * The module info for all PJSIP-related files now uses "PJSIP" instead of "SIP" * CLI and AMI commands created by Asterisk's PJSIP modules now have "pjsip" as the starting word instead of "sip" git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395764 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago

11 Commits (69bebd8f1a9a210108a9afe891a5b4b406be3029)