asterisk

Commit Graph

Author	SHA1	Message	Date
zuul	d35c494df1	Merge "res_pjsip/config_transport: Allow reloading transports." into 13	9 years ago
George Joseph	d2a1457e0b	res_pjsip/config_transport: Allow reloading transports. The 'reload' mechanism actually involves closing the underlying socket and calling the appropriate udp, tcp or tls start functions again. Only outbound_registration, pubsub and session needed work to reset the transport before sending requests to insure that the pjsip transport didn't get pulled out from under them. In my testing, no calls were dropped when a transport was changed for any of the 3 transport types even if ip addresses or ports were changed. To be on the safe side however, a new transport option was added (allow_reload) which defaults to 'no'. Unless it's explicitly set to 'yes' for a transport, changes to that transport will be ignored on a reload of res_pjsip. This should preserve the current behavior. Change-Id: I5e759850e25958117d4c02f62ceb7244d7ec9edf	9 years ago
George Joseph	6b921f706d	res_pjproject: Add ability to map pjproject log levels to Asterisk log levels Warnings and errors in the pjproject libraries are generally handled by Asterisk. In many cases, Asterisk wouldn't even consider them to be warnings or errors so the messages emitted by pjproject directly are either superfluous or misleading. A good exampe of this are the level-0 errors pjproject emits when it can't open a TCP/TLS socket to a client to send an OPTIONS. We don't consider a failure to qualify a UDP client an "ERROR", why should a TCP/TLS client be treated any differently? A config file for res_pjproject has bene added (pjproject.conf) and a new log_mappings object allows mapping pjproject levels to Asterisk levels (or nothing). The defaults if no pjproject.conf file is found are the same as those that were hard-coded into res_pjproject initially: 0,1 = LOG_ERROR, 2 = LOG_WARNING, 3,4,5 = LOG_DEBUG<level> Change-Id: Iba7bb349c70397586889b8f45b8c3d6c6c8c3898	9 years ago
Joshua Colp	1fca224533	Merge "pjsip/alembic: Add missing columns to system and registration" into 13	9 years ago
Joshua Colp	2177dbea50	Merge topic 'ASTERISK-20987' into 13 * changes: app_confbridge: Add ability to get the muted conference state. app_confbridge.c: Update CONFBRIDGE and CONFBRIDGE_INFO documentation. app_confbridge: Make non-admin users join a muted conference muted.	9 years ago
George Joseph	953d1cc11a	pjsip/alembic: Add missing columns to system and registration ps_systems needed disable_tcp_switch ps_registrations needed line and endpoint ASTERISK-25737 #close Change-Id: Iaf9c2d69e62243d9fa53104c28c5339c47d4ac19	9 years ago
Sean Bright	4e8e6d3922	res_rtp_asterisk: Allow ICE host candidates to be overriden During ICE negotiation the IPs of the local interfaces are sent to the remote peer as host candidates. In many cases Asterisk is behind a static one-to-one NAT, so these host addresses will be internal IP addresses. To help in hiding the topology of the internal network, this patch adds the ability to override the host candidates by matching them against a user-defined list of replacements. Change-Id: I1c9541af97b83a4c690c8150d19bf7202c8bff1f	9 years ago
Joshua Colp	f8acadde2c	AST-2016-001 http: Provide greater control of TLS and set modern defaults. This change exposes the configuration of various aspects of the TLS support and sets the default to the modern standards. The TLS cipher is now set to the best values according to the Mozilla OpSec team, different TLS versions can now be disabled, and the cipher order can be forced to be that of the server instead of the client. ASTERISK-24972 #close Change-Id: I0a10f2883f7559af5e48dee0901251dbf30d45b8	9 years ago
Richard Mudgett	3e51e5c7fd	app_confbridge: Make non-admin users join a muted conference muted. ASTERISK-20987 #close Reported by: hristo Change-Id: Ic61a2b524ab3a4cfadf227fc6b3506527bc03f38	9 years ago
George Joseph	9da18af992	res_pjsip: Add res_pjproject dependency to UPGRADE.txt and samples Since res_pjsip now depends on res_pjproject, this is now mentioned in UPGRADE.txt and the basic-pbx modules.conf has been updated. Change-Id: I42826597d5e10f08e518208860c44c96e52f1b2d	9 years ago
Daniel Journo	5644bca9f9	Update version number in features.conf.sample Update the version number in the comments from Asterisk 12 to Asterisk 12+ Change-Id: Ie692ac8cda3c993c3bf10f27f51a1cca3317ec7b	10 years ago
Joshua Colp	236896f391	Merge "pjsip: Add option global/regcontext" into 13	10 years ago
George Joseph	219c204a41	pjsip_sdp_rtp: Add option endpoint/bind_rtp_to_media_address On a system with multiple ip addresses in the same subnet, if a transport is bound to a specific ip address and endpoint/media_address is set, the SIP/SDP will have the correct address in all fields but the rtp stream MAY still originate from one of the other ip addresses, most probably the "primary" ip address. This happens because res_pjsip_sdp_rtp/create_rtp always calls ast_instance_new with the "all" ip address (0.0.0.0 or ::). The new option causes res_pjsip_sdp_rtp/create_rtp to call ast_rtp_instance_new with the endpoint's media_address (if specified) instead of the "all" address. This causes the packets to originate from the specified address. ASTERISK-25632 ASTERISK-25637 Reported-by: Olivier Krief Reported-by: Dan Journo Change-Id: I3dfaa079e54ba7fb7c4fd1f5f7bd9509bbf8bd88	10 years ago
Daniel Journo	22801a06ee	pjsip: Add option global/regcontext Added new global option (regcontext) to pjsip. When set, Asterisk will dynamically create and destroy a NoOp priority 1 extension for a given endpoint who registers or unregisters with us. ASTERISK-25670 #close Reported-by: Daniel Journo Change-Id: Ib1530c5b45340625805c057f8ff1fb240a43ea62	10 years ago
Dade Brandon	1d3d20dd68	app_amd: Correct documentation to reflect functionality Update documentation to reflect that maximum_number_of_words has functionality inconsistent with the variable name (and inconsistent with prior documentation.) Update documentation for silence_threshold, which previously implied that it was measuring time, rather than noise averages in the sample. Update the comments in amd.conf.sample. ASTERISK-25639 #close Change-Id: I4b1451e5dc9cb3cb06d59b6ab872f5275ba79093	10 years ago
Mark Michelson	fdd2afcd16	Confbridge: Add a user timeout option This option adds the ability to specify a timeout, in seconds, for a participant in a ConfBridge. When the user's timeout has been reached, the user is ejected from the conference with the CONFBRIDGE_RESULT channel variable set to "TIMEOUT". The rationale for this change is that there have been times where we have seen channels get "stuck" in ConfBridge because a network issue results in a SIP BYE not being received by Asterisk. While these channels can be hung up manually via CLI/AMI/ARI, adding some sort of automatic cleanup of the channels is a nice feature to have. ASTERISK-25549 #close Reported by Mark Michelson Change-Id: I2996b6c5e16a3dda27595f8352abad0bda9c2d98	10 years ago
Corey Farrell	0393bd6bed	chan_sip: Allow websockets to be disabled. This patch adds a new setting "websockets_enabled" to sip.conf. Setting this to false allows chan_sip to be used without causing conflicts with res_pjsip_transport_websocket. ASTERISK-24106 #close Reported by: Andrew Nagy Change-Id: I04fe8c4f2d57b2d7375e0e25826c91a72e93bea7	10 years ago
Kevin Harwell	c58091737d	res_pjsip_outbound_registration: registration stops due to fatal 4xx response During outbound registration it is possible to receive a fatal (any permanent/ non-temporary 4xx, 5xx, 6xx) response from the registrar that is simply due to a problem with the registrar itself. Upon receiving the failure response Asterisk terminates outbound registration for the given endpoint. This patch adds an option, 'fatal_retry_interval', that when set continues outbound registration at the given interval up to 'max_retries' upon receiving a fatal response. ASTERISK-25485 #close Change-Id: Ibc2c7b47164ac89cc803433c0bbe7063bfa143a2	10 years ago
Joshua Colp	2749721791	pjsip: Add rtp_timeout and rtp_timeout_hold endpoint options. This change adds support for the 'rtp_timeout' and 'rtp_timeout_hold' endpoint options. These allow the channel to be hung up if RTP is not received from the remote endpoint for a specified number of seconds. ASTERISK-25259 #close Change-Id: I3f39daaa7da2596b5022737b77799d16204175b9	10 years ago
Mark Michelson	b4e19e414a	res_pjsip: Add rtp_keepalive to sample config file. Change-Id: I5f62d0c5684f8b2335f9f8ac2d79ee04fbdafb19	10 years ago
Rusty Newton	62c64c3bd1	Documentation: A couple of trivial fixes in sip.conf.sample and func_cdr.c * In sip.conf.sample fix sentence where we said that WS or WSS are supported transports for use in an outbound register definition. They are not supported in that case. * In func_cdr.c made it clear that the Disable option for CDR_PROP can be used to enable CDR on a channel. ASTERISK-24867 #close Reported by: Rusty Newton ASTERISK-24853 #close Reported by: PSDK Change-Id: I3d698bc6302b9d00a0a995b5c4ad9a42d69b48ca	10 years ago
Kevin Harwell	31c77b157b	res_pjsip: Add option to force G.726 to be treated as AAL2 packed. Some phones send g.726 audio packed for AAL2, which differs from what is recommended by RFC 3351. If Asterisk receives audio formatted as such when negotiating g.726 then it sounds a bit distorted. Added an option to res_pjsip_endpoint that allows g.726 negotiated audio to be treated as g.726 AAL2 packed. ASTERISK-25158 #close Reported by: Steve Pitts Change-Id: Ie7e21f75493d7fe53e75e12c971e72f5afa33615	10 years ago
Rusty Newton	4dbd4021c9	configs/basic-pbx: Modified main IVR to play new Allison prompt. The main IVR was playing demo-congrats. I've switched it over to the basic-pbx-ivr-main file that we added in core sounds 1.4.27. This prompt has Allison prompting the user with the actual IVR menu. ASTERISK-24892 #close Change-Id: Ifb749616ff8e156a1031ddaddfcc9244767a095d	10 years ago
Richard Mudgett	904f5d98f6	chan_dahdi: Improve force_restart_unavailable_chans option description. ASTERISK-25034 Reported by: Richard Mudgett Change-Id: I1ff8f02124d2f4abd632a050da52c64285bb7f30	10 years ago
Rodrigo Ramírez Norambuena	7f611fa0e8	cdr/cdr_csv.c: Add a new option to enable columns added in Asterisk 1.8 This patch adds a new option to cdr.conf, 'newcdrcolumns', that will handle CDR columns added in Asterisk 1.8. The columns are: * peeraccount * linkedid * sequence When enabled, the columns in the database entry will be populated with the data from the CDR. ASTERISK-24976 #close Change-Id: I51a57063f4ae5e194a9d933a8df45dc8a4534f0b	10 years ago
Corey Farrell	3efe0df044	Sample Configs: Fix syntax error in pjsip.conf The sample pjsip.conf has a few comment lines that are missing the semicolons at the start of the comment, causing the config to fail load. Change-Id: I776a38c916a7df7ee3e072fd0b21dbf4cc457352	10 years ago
Mark Michelson	e0c6f88010	Merge "chan_dahdi: Add the chan_dahdi.conf force_restart_unavailable_chans option." into 13	10 years ago
Richard Mudgett	d3c310a28c	chan_dahdi: Add the chan_dahdi.conf force_restart_unavailable_chans option. Some telco switches occasionally ignore ISDN RESTART requests. The fix for ASTERISK-19608 added an escape clause for B channels in the restarting state if the telco ignores a RESTART request. If the telco fails to acknowledge the RESTART then Asterisk will assume the telco acknowledged the RESTART on the second call attempt requesting the B channel by the telco. The escape clause is good for dealing with RESTART requests in general but it does cause the next call for the restarting B channel to be rejected if the telco insists the call must go on that B channel. chan_dahdi doesn't really need to issue a RESTART request in response to receiving a cause 44 (Requested channel not available) code. Sending the RESTART in such a situation is not required (nor prohibited) by the standards. I think chan_dahdi does this for historical reasons to deal with buggy peers to get channels unstuck in a similar fashion as the chan_dahdi.conf resetinterval option. * Add the chan_dahdi.conf force_restart_unavailable_chans compatability option that when disabled will prevent chan_dahdi from trying to RESTART the channel in response to a cause 44 code. ASTERISK-25034 #close Reported by: Richard Mudgett Change-Id: Ib8b17a438799920f4a2038826ff99a1884042f65	10 years ago
Joshua Colp	89f6719f7a	res_pjsip_outbound_registration: Add virtual line support. Virtual line support establishes a relationship between messages related to an outbound registration and a local endpoint. This is accomplished by attaching a parameter to the Contact of the outbound registration and looking for it on any received requests. If the parameter exists and can be matched to an outbound registration the configured endpoint is associated with the request. ASTERISK-24949 #close Reported by: Joshua Colp Change-Id: I7df909d2625479110a83fdd354c21ac539e8615d	10 years ago
Rodrigo Ramírez Norambuena	d5dd43856e	cdr/cdr_odbc.c: Added to record new columns add on CDR 1.8 Asterisk Version Add new column to INSERT new columns added in cdr 1.8 version. The columns are: * peeraccount * linkedid * sequence This feature is configurable in cdr_odbc.conf using a new configuration option, 'newcdrcolumns'. ASTERISK-24976 #close Change-Id: Ibe0c7540a88305c6012786f438a0813ad8b19127	10 years ago
George Joseph	674b18bdf0	pjsip_options: Add qualify_timeout processing and eventing This is the second follow-on to https://reviewboard.asterisk.org/r/4572/ and the discussion at http://lists.digium.com/pipermail/asterisk-dev/2015-March/073921.html The basic issues are that changes in contact status don't cause events to be emitted for the associated endpoint. Only dynamic contact add/delete actions update the endpoint. Also, the qualify timeout is fixed by pjsip at 32 seconds which is a long time. This patch makes use of the new transaction timeout feature in r4585 and provides the following capabilities... 1. A new aor/contact variable 'qualify_timeout' has been added that allows the user to specify the maximum time in milliseconds to wait for a response to an OPTIONS message. The default is 3000ms. When the timer expires, the contact is marked unavailable. 2. Contact status changes are now propagated up to the endpoint as follows... When any contact is 'Available', the endpoint is marked as 'Reachable'. When all contacts are 'Unavailable', the endpoint is marked as 'Unreachable'. The existing endpoint events are generated appropriately. ASTERISK-24863 #close Change-Id: Id0ce0528e58014da1324856ea537e7765466044a Tested-by: Dmitriy Serov Tested-by: George Joseph <george.joseph@fairview5.com>	10 years ago
George Joseph	1b6f6ff841	res_pjsip: Add global option to limit the maximum time for initial qualifies Currently when Asterisk starts initial qualifies of contacts are spread out randomly between 0 and qualify_timeout to prevent network and system overload. If a contact's qualify_frequency is 5 minutes however, that contact may be unavailable to accept calls for the entire 5 minutes after startup. So while staggering the initial qualifies is a good idea, basing the time on qualify_timeout could leave contacts unavailable for too long. This patch adds a new global parameter "max_initial_qualify_time" that sets the maximum time for the initial qualifies. This way you could make sure that all your contacts are initialy, randomly qualified within say 30 seconds but still have the contact's ongoing qualifies at a 5 minute interval. If max_initial_qualify_time is > 0, the formula is initial_interval = min(max_initial_interval, qualify_timeout * random(). If not set, qualify_timeout is used. The default is "0" (disabled). ASTERISK-24863 #close Change-Id: Ib80498aa1ea9923277bef51d6a9015c9c79740f4 Tested-by: George Joseph <george.joseph@fairview5.com>	10 years ago
Kevin Harwell	af458e2e60	chan_sip: make progressinband default to no After the "progressinband" value setting of "never" was updated to never send a 183 this separated its use from the "no" value. Since "never" was the default, but most users probably expect "no" this patch updates the default for the "progressinband" setting to "no." ASTERISK-24835 #close Reported by: Andrew Nagy Review: https://reviewboard.asterisk.org/r/4606/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434654 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago
Jonathan Rose	cfbf5fbe91	SAC: Add a few basic queues Review: https://reviewboard.asterisk.org/r/4503/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433658 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago
Jonathan Rose	1a50d8d4c2	SAC: Add conferencing extensions and configuration Review: https://reviewboard.asterisk.org/r/4504/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433656 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago
Rusty Newton	c6c08d755d	configs/basic-pbx - Super Awesome Company example configs Phase 1, Patch 2 Example configuration files for a "basic PBX" deployment for the fictitious Super Awesome Company. Details at https://reviewboard.asterisk.org/r/4488/ and https://wiki.asterisk.org/wiki/display/AST/Super+Awesome+Company Patch 4488 includes all functionality needed for SAC's outside connectivity and some externally accessed features, as well as outbound dialing. Reported by: Malcolm Davenport Tested by: Rusty Newton Review: https://reviewboard.asterisk.org/r/4488/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433624 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago
Richard Mudgett	b1e9552b08	chan_pjsip: Add "rpid_immediate" option to prevent unnecessary "180 Ringing" messages. Incoming PJSIP call legs that have not been answered yet send unnecessary "180 Ringing" or "183 Progress" messages every time a connected line update happens. If the outgoing channel is also PJSIP then the incoming channel will always send a "180 Ringing" or "183 Progress" message when the outgoing channel sends the INVITE. Consequences of these unnecessary messages: * The caller can start hearing ringback before the far end even gets the call. * Many phones tend to grab the first connected line information and refuse to update the display if it changes. The first information is not likely to be correct if the call goes to an endpoint not under the control of the first Asterisk box. When connected line first went into Asterisk in v1.8, chan_sip received an undocumented option "rpid_immediate" that defaults to disabled. When enabled, the option immediately passes connected line update information to the caller in "180 Ringing" or "183 Progress" messages as described above. * Added "rpid_immediate" option to prevent unnecessary "180 Ringing" or "183 Progress" messages. The default is "no" to disable sending the unnecessary messages. ASTERISK-24781 #close Reported by: Richard Mudgett Review: https://reviewboard.asterisk.org/r/4473/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433338 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago
Kevin Harwell	1f428f25f0	res_pjsip: Allow configuration of endpoint identifier query order This patch fixes previously reverted code that caused binary incompatibility problems with some modules. And like the original patch it makes sure that no matter what order the endpoint identifier modules were loaded, priority is given based on the ones specified in the new global 'endpoint_identifier_order' option. ASTERISK-24840 Reported by: Mark Michelson Review: https://reviewboard.asterisk.org/r/4489/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433028 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago
Matthew Jordan	a4c27baf47	apps/app_amd: Document maximum_word_length option; fix AMDCAUSE documentation This patch corrects the documentation for the AMD application. Specifically: * It documents the maximum_word_length option, which limits the maximum allowed length of a single utterance. * It clarifies the AMDCAUSE values MAXWORDS and MAXWORDLENGTH. MAXWORDLENGTH was documented as MAXWORDS, while MAXWORDS was undocumented. Thanks to the issue reporter, Frank DiGennaro, for pointing out the issues. ASTERISK-19470 #close Reported by: Frank DiGennaro ........ Merged revisions 432918 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432920 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago
Kevin Harwell	0497b7b155	Revert - res_pjsip: Allow configuration of endpoint identifier query order Due to a break in binary compatibility with some other modules these changes are being reverted until the issue can be resolved. ASTERISK-24840 Reported by: Mark Michelson git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432868 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago
Kevin Harwell	110b99646c	res_pjsip: Allow configuration of endpoint identifier query order It's possible to have a scenario that will create a conflict between endpoint identifiers. For instance an incoming call could be identified by two different endpoint identifiers and the one chosen depended upon which identifier module loaded first. This of course causes problems when, for example, the incoming call is expected to be identified by username, but instead is identified by ip. This patch adds a new 'global' option to res_pjsip called 'endpoint_identifier_order'. It is a comma separated list of endpoint identifier names that specifies the order by which identifiers are processed and checked. ASTERISK-24840 #close Reported by: Mark Michelson Review: https://reviewboard.asterisk.org/r/4455/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432638 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago
Rusty Newton	53aec7a969	configs/basic-pbx - Super Awesome Company example configs Phase 1, Patch 1 Example configuration files for a "basic PBX" deployment for the fictitious Super Awesome Company. Details at https://reviewboard.asterisk.org/r/4379/ and https://wiki.asterisk.org/wiki/display/AST/Super+Awesome+Company Reported by: Malcolm Davenport Tested by: Rusty Newton Review: https://reviewboard.asterisk.org/r/4379/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432301 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago
Joshua Colp	7890d0ad07	pjsip: Remove "contact" type from pjsip.conf.sample The "contact" object is not meant to be configured from the pjsip.conf configuration file. It is meant to be created as a result of a registration and stored elsewhere. ASTERISK-24085 #close Reported by: Rusty Newton git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431860 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago
George Joseph	4d8ab20a8a	res_pjsip_config_wizard: Add ability to auto-create hints. Looking at the Super Awesome Company sample reminded me that creating hints is just plain gruntwork. So you can now have the pjsip conifg wizard auto-create them for you. Specifying 'hint_exten' in the wizard will create 'exten => <hint_exten>,hint/PJSIP/<wizard_id>' in whatever is specified for 'hint_context'. Specifying 'hint_application' in the wizard will create 'exten => <hint_exten>,1,<hint_application>' in whatever is specified for 'hint_context'. The default for 'hint_context' is the endpoint's context. There's no default for 'hint_application'. If not specified, no app is added. There's no default for 'hint_exten'. If not specified, neither the hint itself nor the application will be created. Some may think this is the slippery slope to users.conf but hints are a basic necessity for phones unlike voicemail, manager, etc that users.conf creates. Tested-by: George Joseph Review: https://reviewboard.asterisk.org/r/4383/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431643 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago
Ashley Sanders	112d23c73e	HTTP: For httpd server, need option to define server name for security purposes Added a new config property [servername] to the http.conf file; updated the http server to use the new property when sending responses, for showing http status through the CLI and when reporting status through the 'httpstatus' webpage. ASTERISK-24316 #close Reported By: Andrew Nagy Review: https://reviewboard.asterisk.org/r/4374/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431471 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	6af6a216a1	CHANNEL(peer), chan_iax2, res_fax, SNMP agent: Fix deadlock from reaching across a bridge. Calling ast_channel_bridge_peer() cannot be done while holding any channel locks. The reported issue hit the deadlock in chan_iax2, but an audit of the ast_channel_bridge_peer() calls found three more locations where the same deadlock can occur. * Made CHANNEL(peer), res_fax, and the SNMP agent not call ast_channel_bridge_peer() with any channel locked. For CHANNEL(peer) I had to rework the logic to not hold the channel lock. * Made chan_iax2 no longer call ast_channel_bridge_peer(). It was done for legacy reasons that no longer apply. * Removed the iax.conf forcejitterbuffer option. It is now always enabled when the jitterbuffer option is enabled. If you put a jitter buffer on a channel it will be on the channel. ASTERISK-24600 #close Reported by: Jeff Collell Review: https://reviewboard.asterisk.org/r/4342/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430817 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Mark Michelson	8bc4a89e1f	Add support for the ca_list_path option for PJSIP transports. This allows for a path to be specified that has a collection of CA certificates in it. ASTERISK-24575 #close Reported by cloos Patches: pj-ca-path-trunk.diff uploaded by cloos (License #5956) Review: https://reviewboard.asterisk.org/r/4344 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430709 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	7d606d87bf	configs/samples/features.conf.sample: Document attended transfer DTMF options The sample config was missing the configuration options for DTMF attended transfer completion scenarios. The configuration options 'atxferabort', 'atxfercomplete', 'atxferthreeway', and 'atxferswap' are now documented in the appropriate configuration file. ASTERISK-24678 #close Reported by: Niklas Larsson patches: features.conf.sample.diff uploaded by Niklas Larsson (License 5068) git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430526 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kinsey Moore	eb9ce791d8	res_fax: Add T.38 negotiation timeout option This change makes the T.38 negotiation timeout configurable via 't38timeout' in res_fax.conf or FAXOPT(t38timeout). It was previously hard coded to be 5000 milliseconds. This change also handles T.38 switch failures by aborting the fax since in the case where this can happen, both sides have agreed to switch to T.38 and Asterisk is unable to do so. Review: https://reviewboard.asterisk.org/r/4320/ ........ Merged revisions 430415 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430416 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kevin Harwell	1a0979d437	app_queue: Update sample conf documenation Updated the queues.conf.sample file to explicitly state which channel queue variables are propagated to. ASTERISK-24267 Reported by: Mitch Claborn ........ Merged revisions 430126 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430127 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago

1 2 3 4 5 ...

1782 Commits (69b6cf2368cc70e4ce02d4aa088cf238025e3a8e)