9 Commits (68987d4e8a91cb431b7fd4c9e9b3e9bfbba4e0c7)

Author	SHA1	Message	Date
George Joseph	d7e262226f	Stir/Shaken Refactor ... Why do we need a refactor? The original stir/shaken implementation was started over 3 years ago when little was understood about practical implementation. The result was an implementation that wouldn't actually interoperate with any other stir-shaken implementations. There were also a number of stir-shaken features and RFC requirements that were never implemented such as TNAuthList certificate validation, sending Reason headers in SIP responses when verification failed but we wished to continue the call, and the ability to send Media Key(mky) grants in the Identity header when the call involved DTLS. Finally, there were some performance concerns around outgoing calls and selection of the correct certificate and private key. The configuration was keyed by an arbitrary name which meant that for every outgoing call, we had to scan the entire list of configured TNs to find the correct cert to use. With only a few TNs configured, this wasn't an issue but if you have a thousand, it could be. What's changed? * Configuration objects have been refactored to be clearer about their uses and to fix issues. * The "general" object was renamed to "verification" since it contains parameters specific to the incoming verification process. It also never handled ca_path and crl_path correctly. * A new "attestation" object was added that controls the outgoing attestation process. It sets default certificates, keys, etc. * The "certificate" object was renamed to "tn" and had it's key change to telephone number since outgoing call attestation needs to look up certificates by telephone number. * The "profile" object had more parameters added to it that can override default parameters specified in the "attestation" and "verification" objects. * The "store" object was removed altogther as it was never implemented. * We now use libjwt to create outgoing Identity headers and to parse and validate signatures on incoming Identiy headers. Our previous custom implementation was much of the source of the interoperability issues. * General code cleanup and refactor. * Moved things to better places. * Separated some of the complex functions to smaller ones. * Using context objects rather than passing tons of parameters in function calls. * Removed some complexity and unneeded encapsuation from the config objects. Resolves: #351 Resolves: #46 UserNote: Asterisk's stir-shaken feature has been refactored to correct interoperability, RFC compliance, and performance issues. See https://docs.asterisk.org/Deployment/STIR-SHAKEN for more information. UpgradeNote: The stir-shaken refactor is a breaking change but since it's not working now we don't think it matters. The stir_shaken.conf file has changed significantly which means that existing ones WILL need to be changed. The stir_shaken.conf.sample file in configs/samples/ has quite a bit more information. This is also an ABI breaking change since some of the existing objects needed to be changed or removed, and new ones added. Additionally, if res_stir_shaken is enabled in menuselect, you'll need to either have the development package for libjwt v1.15.3 installed or use the --with-libjwt-bundled option with ./configure. (cherry picked from commit 2e0d837e01)	2 years ago
George Joseph	7ba6d43083	test_res_pjsip_session_caps: Create unit test ... This unit test runs through combinations of... * Local codecs * Remote Codecs * Codec Preference * Incoming/Outgoing A few new APIs were created to make it easier to test the functionality but didn't result in any actual functional change. ASTERISK_28777 Change-Id: Ic8957c43e7ceeab0e9272af60ea53f056164f164	6 years ago
Corey Farrell	65399a5eda	res_pjsip: Add REF_DEBUG info to module references. ... This provides better information to REF_DEBUG log for troubleshooting when the system is unable to unload res_pjsip.so during shutdown due to module references. ASTERISK-27306 Change-Id: I63197ad33d1aebe60d12e0a6561718bdc54e4612	8 years ago
Mark Michelson	45df25a579	chan_pjsip: Add support for multiple streams of the same type. ... The stream topology (list of streams and order) is now stored with the configured PJSIP endpoints and used during the negotiation process. Media negotiation state information has been changed to be stored in a separate object. Two of these objects exist at any one time on a session. The active media state information is what was previously negotiated and the pending media state information is what the media state will become if negotiation succeeds. Streams and other state information is stored in this object using the index (or position) of each individual stream for easy lookup. The ability for a media type handler to specify a callback for writing has been added as well as the ability to add file descriptors with a callback which is invoked when data is available to be read on them. This allows media logic to live outside of the chan_pjsip module. Direct media has been changed so that only the first audio and video stream are directly connected. In the future once the RTP engine glue API has been updated to know about streams each individual stream can be directly connected as appropriate. Media negotiation itself will currently answer all the provided streams on an offer within configured limits and on an offer will use the topology created as a result of the disallow/allow codec lines. If a stream has been removed or declined we will now mark it as such within the resulting SDP. Applications can now also request that the stream topology change. If we are told to do so we will limit any provided formats to the ones configured on the endpoint and send a re-invite with the new topology. Two new configuration options have also been added to PJSIP endpoints: max_audio_streams: determines the maximum number of audio streams to offer/accept from an endpoint. Defaults to 1. max_video_streams: determines the maximum number of video streams to offer/accept from an endpoint. Defaults to 1. ASTERISK-27076 Change-Id: I8afd8dd2eb538806a39b887af0abd046266e14c7	8 years ago
Kevin Harwell	9e53c30610	res_pjsip_refer/session: Calls dropped during transfer ... When doing an attended transfer it's possible for the transferer, after receiving an accepted response from Asterisk, to send a BYE to Asterisk, which can then be processed before Asterisk has time to start and/or complete the transfer process. This of course causes the transfer to not complete successfully, thus dropping the call. This patch makes it so any BYEs received from the transferer, after the REFER, that initiate a session end are deferred until the transfer is complete. This allows the channel that would have otherwise been hung up by Asterisk to remain available throughout the transfer process. ASTERISK-27053 #close Change-Id: I43586db79079457d92d71f1fd993be9a3b409d5a	8 years ago
Richard Mudgett	e7ee83ea90	res_pjsip_refer: Fix occasional unexpected BYE sent after receiving a REFER. ... A race condition happened between initiating a transfer and requesting that a dialog termination be delayed. Occasionally, the transferrer channels would exit the bridge and hangup before the dialog termination delay was requested. * Made request dialog termination delay before initiating the transfer action. If the transfer fails then cancel the delayed dialog termination request. ASTERISK-24755 #close Reported by: John Bigelow Review: https://reviewboard.asterisk.org/r/4460/ ........ Merged revisions 432668 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432669 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	74d43977cf	res_pjsip_session: Delay sending BYE if a re-INVITE transaction is in progress. ... Given the scenario where a PJSIP channel is in a native RTP bridge with direct media and the channel is then hung up the code will currently re-INVITE the channel back to Asterisk and send a BYE at the same time. Many SIP implementations dislike this greatly. This change makes it so that if a re-INVITE transaction is in progress the BYE is queued to occur after the completion of the transaction (be it through normal means or a timeout). Review: https://reviewboard.asterisk.org/r/4248/ ........ Merged revisions 429409 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429410 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	0165c5f95a	chan_pjsip: Fix deadlock when masquerading PJSIP channels. ... Performing a directed call pickup resulted in a deadlock when PJSIP channels were involved. A masquerade needs to hold onto the channel locks while it swaps channel information between the two channels involved in the masquerade. With PJSIP channels, the fixup routine needed to push a fixup task onto the PJSIP channel's serializer. Unfortunately, if the serializer was also processing a task that needed to lock the channel, you get deadlock. * Added a new control frame that is used to notify the channels that a masquerade is about to start and when it has completed. * Added the ability to query taskprocessors if the current thread is the taskprocessor thread. * Added the ability to suspend/unsuspend the PJSIP serializer thread so a masquerade could fixup the PJSIP channel without using the serializer. ASTERISK-24356 #close Reported by: rmudgett Review: https://reviewboard.asterisk.org/r/4034/ ........ Merged revisions 424471 from http://svn.asterisk.org/svn/asterisk/branches/12 ........ Merged revisions 424472 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424473 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Mark Michelson	735b30ad71	The large GULP->PJSIP renaming effort. ... The general gist is to have a clear boundary between old SIP stuff and new SIP stuff by having the word "SIP" for old stuff and "PJSIP" for new stuff. Here's a brief rundown of the changes: * The word "Gulp" in dialstrings, functions, and CLI commands is now "PJSIP" * chan_gulp.c is now chan_pjsip.c * Function names in chan_gulp.c that were "gulp_*" are now "chan_pjsip_*" * All files that were "res_sip*" are now "res_pjsip*" * The "res_sip" directory is now "res_pjsip" * Files in the "res_pjsip" directory that began with "sip_*" are now "pjsip_*" * The configuration file is now "pjsip.conf" instead of "res_sip.conf" * The module info for all PJSIP-related files now uses "PJSIP" instead of "SIP" * CLI and AMI commands created by Asterisk's PJSIP modules now have "pjsip" as the starting word instead of "sip" git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395764 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago