5520 Commits (68987d4e8a91cb431b7fd4c9e9b3e9bfbba4e0c7)

Author	SHA1	Message	Date
George Joseph	43b4863b8a	res_pjsip: Change suppress_moh_on_sendonly to OPT_BOOL_T ... The suppress_moh_on_sendonly endpoint option should have been defined as OPT_BOOL_T in pjsip_configuration.c and AST_BOOL_VALUES in the alembic script instead of OPT_YESNO_T and YESNO_VALUES. Also updated contrib/ast-db-manage/README.md to indicate that AST_BOOL_VALUES should always be used and provided an example. Resolves: #995	11 months ago
George Joseph	34ba2038e9	res_pjsip: Add new endpoint option "suppress_moh_on_sendonly" ... Normally, when one party in a call sends Asterisk an SDP with a "sendonly" or "inactive" attribute it means "hold" and causes Asterisk to start playing MOH back to the other party. This can be problematic if it happens at certain times, such as in a 183 Progress message, because the MOH will replace any early media you may be playing to the calling party. If you set this option to "yes" on an endpoint and the endpoint receives an SDP with "sendonly" or "inactive", Asterisk will NOT play MOH back to the other party. Resolves: #979 UserNote: The new "suppress_moh_on_sendonly" endpoint option can be used to prevent playing MOH back to a caller if the remote end sends "sendonly" or "inactive" (hold) to Asterisk in an SDP. (cherry picked from commit badf203203)	12 months ago
Sean Bright	647016e5e2	res_pjsip.c: Fix Contact header rendering for IPv6 addresses. ... Fix suggested by @nvsystems. Fixes #985 (cherry picked from commit 5c76486203)	12 months ago
George Joseph	f2fe378b06	res_pjsip: Move tenantid to end of ast_sip_endpoint ... The tenantid field was originally added to the ast_sip_endpoint structure at the end of the AST_DECLARE_STRING_FIELDS block. This caused everything after it in the structure to move down in memory and break ABI compatibility. It's now at the end of the structure as an AST_STRING_FIELD_EXTENDED. Given the number of string fields in the structure now, the initial string field allocation was also increased from 64 to 128 bytes. Resolves: #982 (cherry picked from commit be8f3a3fa4)	12 months ago
Thomas Guebels	56e48b05b5	pjsip_transport_events: handle multiple addresses for a domain ... The key used for transport monitors was the remote host name for the transport and not the remote address resolved for this domain. This was problematic for domains returning multiple addresses as several transport monitors were created with the same key. Whenever a subsystem wanted to register a callback it would always end up attached to the first transport monitor with a matching key. The key used for transport monitors is now the remote address and port the transport actually connected to. Fixes: #932 (cherry picked from commit 2ee258b0fc)	12 months ago
George Joseph	0a69e8397d	res_srtp: Change Unsupported crypto suite msg from verbose to debug ... There's really no point in spamming logs with a verbose message for every unsupported crypto suite an older client may send in an SDP. If none are supported, there will be an error or warning. (cherry picked from commit 50bd50d798)	12 months ago
Ben Ford	d2a2e8c912	Add res_pjsip_config_sangoma external module. ... Adds res_pjsip_config_sangoma as an external module that can be downloaded via menuselect. It lives under the Resource Modules section. (cherry picked from commit b8d818bd3c)	12 months ago
Thomas Guebels	9374ae1036	pjsip_transport_events: Avoid monitor destruction ... When a transport is disconnected, several events can arrive following each other. The first event will be PJSIP_TP_STATE_DISCONNECT and it will trigger the destruction of the transport monitor object. The lookup for the transport monitor to destroy is done using the transport key, that contains the transport destination host:port. A reconnect attempt by pjsip will be triggered as soon something needs to send a packet using that transport. This can happen directly after a disconnect since ca Subsequent events can arrive later like PJSIP_TP_STATE_DESTROY and will also try to trigger the destruction of the transport monitor if not already done. Since the lookup for the transport monitor to destroy is done using the transport key, it can match newly created transports towards the same destination and destroy their monitor object. Because of this, it was sometimes not possible to monitor a transport after one or more disconnections. This fix adds an additional check on the transport pointer to ensure only a monitor for that specific transport is removed. Fixes: #923 (cherry picked from commit 6763dda90f)	12 months ago
Sean Bright	16d8c3f438	Revert "res_rtp_asterisk: Count a roll-over of the sequence number even on lost packets." ... This reverts commit cb5e3445be. The original change from 16 to 15 bit sequence numbers was predicated on the following from the now-defunct libSRTP FAQ on sourceforge.net: > *Q6. The use of implicit synchronization via ROC seems > dangerous. Can senders and receivers lose ROC synchronization?* > > **A.** It is possible to lose ROC synchronization between sender and > receiver(s), though it is not likely in practice, and practical > steps can be taken to avoid it. A burst loss of 2^16 packets or more > will always break synchronization. For example, a conversational > voice codec that sends 50 packets per second will have its ROC > increment about every 22 minutes. A network with a burst of packet > loss that long has problems other than ROC synchronization. > > There is a higher sensitivity to loss at the very outset of an SRTP > stream. If the sender's initial sequence number is close to the > maximum value of 2^16-1, and all packets are lost from the initial > packet until the sequence number cycles back to zero, the sender > will increment its ROC, but the receiver will not. The receiver > cannot determine that the initial packets were lost and that > sequence-number rollover has occurred. In this case, the receiver's > ROC would be zero whereas the sender's ROC would be one, while their > sequence numbers would be so close that the ROC-guessing algorithm > could not detect this fact. > > There is a simple solution to this problem: the SRTP sender should > randomly select an initial sequence number that is always less than > 2^15. This ensures correct SRTP operation so long as fewer than 2^15 > initial packets are lost in succession, which is within the maximum > tolerance of SRTP packet-index determination (see Appendix A and > page 14, first paragraph of RFC 3711). An SRTP receiver should > carefully implement the index-guessing algorithm. A naive > implementation can unintentionally guess the value of > 0xffffffffffffLL whenever the SEQ in the packet is greater than 2^15 > and the locally stored SEQ and ROC are zero. (This can happen when > the implementation fails to treat those zero values as a special > case.) > > When ROC synchronization is lost, the receiver will not be able to > properly process the packets. If anti-replay protection is turned > on, then the desynchronization will appear as a burst of replay > check failures. Otherwise, if authentication is being checked, then > it will appear as a burst of authentication failures. Otherwise, if > encryption is being used, the desynchronization may not be detected > by the SRTP layer, and the packets may be improperly decrypted. However, modern libSRTP (as of 1.0.1[1]) now mentions the following in their README.md[2]: > The sequence number in the rtp packet is used as the low 16 bits of > the sender's local packet index. Note that RTP will start its > sequence number in a random place, and the SRTP layer just jumps > forward to that number at its first invocation. An earlier version > of this library used initial sequence numbers that are less than > 32,768; this trick is no longer required as the > rdbx_estimate_index(...) function has been made smarter. So truncating our initial sequence number to 15 bit is no longer necessary. 1. 0eb007f0dc/CHANGES (L271-L289) 2. 2de20dd9e9/README.md (implementation-notes) (cherry picked from commit f3138af519)	12 months ago
Sean Bright	5152a05416	res_agi.c: Ensure SIGCHLD handler functions are properly balanced. ... Calls to `ast_replace_sigchld()` and `ast_unreplace_sigchld()` must be balanced to ensure that we can capture the exit status of child processes when we need to. This extends to functions that call `ast_replace_sigchld()` and `ast_unreplace_sigchld()` such as `ast_safe_fork()` and `ast_safe_fork_cleanup()`. The primary change here is ensuring that we do not call `ast_safe_fork_cleanup()` in `res_agi.c` if we have not previously called `ast_safe_fork()`. Additionally we reinforce some of the documentation and add an assertion to, ideally, catch this sooner were this to happen again. Fixes #922 (cherry picked from commit 243f20a78d)	12 months ago
Naveen Albert	107c9e7c68	main, res, tests: Fix compilation errors on FreeBSD. ... asterisk.c, manager.c: Increase buffer sizes to avoid truncation warnings. config.c: Include header file for WIFEXITED/WEXITSTATUS macros. res_timing_kqueue: Use more portable format specifier. test_crypto: Use non-linux limits.h header file. Resolves: #916 (cherry picked from commit b8b21b3f00)	12 months ago
George Joseph	2f3b10d1b2	res_rtp_asterisk: Fix dtls timer issues causing FRACKs and SEGVs ... In dtls_srtp_handle_timeout(), when DTLSv1_get_timeout() returned success but with a timeout of 0, we were stopping the timer and decrementing the refcount on instance but not resetting the timeout_timer to -1. When dtls_srtp_stop_timeout_timer() was later called, it was atempting to stop a stale timer and could decrement the refcount on instance again which would then cause the instance destructor to run early. This would result in either a FRACK or a SEGV when ast_rtp_stop(0 was called. According to the OpenSSL docs, we shouldn't have been stopping the timer when DTLSv1_get_timeout() returned success and the new timeout was 0 anyway. We should have been calling DTLSv1_handle_timeout() again immediately so we now reschedule the timer callback for 1ms (almost immediately). Additionally, instead of scheduling the timer callback at a fixed interval returned by the initial call to DTLSv1_get_timeout() (usually 999 ms), we now reschedule the next callback based on the last call to DTLSv1_get_timeout(). Resolves: #487 (cherry picked from commit 7db8ae296c)	12 months ago
jiangxc	f7b9575241	res_agi.c: Prevent possible double free during `SPEECH RECOGNIZE` ... When using the speech recognition module, crashes can occur sporadically due to a "double free or corruption (out)" error. Now, in the section where the audio stream is being captured in a loop, each time after releasing fr, it is set to NULL to prevent repeated deallocation. Fixes #772 (cherry picked from commit 2d676c7560)	12 months ago
George Joseph	62f8ea392b	stir_shaken: Fix propagation of attest_level and a few other values ... attest_level, send_mky and check_tn_cert_public_url weren't propagating correctly from the attestation object to the profile and tn. * In the case of attest_level, the enum needed to be changed so the "0" value (the default) was "NOT_SET" instead of "A". This now allows the merging of the attestation object, profile and tn to detect when a value isn't set and use the higher level value. * For send_mky and check_tn_cert_public_url, the tn default was forced to "NO" which always overrode the profile and attestation objects. Their defaults are now "NOT_SET" so the propagation happens correctly. * Just to remove some redundant code in tn_config.c, a bunch of calls to generate_sorcery_enum_from_str() and generate_sorcery_enum_to_str() were replaced with a single call to generate_acfg_common_sorcery_handlers(). Resolves: #904	1 year ago
George Joseph	c580ad48fe	res_stir_shaken: Remove stale include for jansson.h in verification.c ... verification.c had an include for jansson.h left over from previous versions of the module. Since res_stir_shaken no longer has a dependency on jansson, the bundled version wasn't added to GCC's include path so if you didn't also have a jansson development package installed, the compile would fail. Removing the stale include was the only thing needed. Resolves: #889	1 year ago
George Joseph	f32fd478e2	res_stir_shaken.c: Fix crash when stir_shaken.conf is invalid ... * If the call to ast_config_load() returns CONFIG_STATUS_FILEINVALID, check_for_old_config() now returns LOAD_DECLINE instead of continuing on with a bad pointer. * If CONFIG_STATUS_FILEMISSING is returned, check_for_old_config() assumes the config is being loaded from realtime and now returns LOAD_SUCCESS. If it's actually not being loaded from realtime, sorcery will catch that later on. * Also refactored the error handling in load_module() a bit. Resolves: #884	1 year ago
George Joseph	41bcc40fc5	res_stir_shaken: Check for disabled before param validation ... For both attestation and verification, we now check whether they've been disabled either globally or by the profile before validating things like callerid, orig_tn, dest_tn, etc. This prevents useless error messages. Resolves: #879 (cherry picked from commit 7773327546)	1 year ago
Mike Bradeen	8ad9f7d320	res_pjsip_sdp_rtp: Use negotiated DTMF Payload types on bitrate mismatch ... When Asterisk sends an offer to Bob that includes 48K and 8K codecs with matching 4733 offers, Bob may want to use the 48K audio codec but can not accept 48K digits and so negotiates for a mixed set. Asterisk will now check Bob's offer to make sure Bob has indicated this is acceptible and if not, will use Bob's preference. Fixes: #847 (cherry picked from commit ac673dd14e)	1 year ago
George Joseph	7f6ae7b990	security_agreements.c: Refactor the to_str functions and fix a few other bugs ... * A static array of security mechanism type names was created. * ast_sip_str_to_security_mechanism_type() was refactored to do a lookup in the new array instead of using fixed "if/else if" statments. * security_mechanism_to_str() and ast_sip_security_mechanisms_to_str() were refactored to use ast_str instead of a fixed length buffer to store the result. * ast_sip_security_mechanism_type_to_str was removed in favor of just referencing the new type name array. Despite starting with "ast_sip_", it was a static function so removing it doesn't affect ABI. * Speaking of "ast_sip_", several other static functions that started with "ast_sip_" were renamed to avoid confusion about their public availability. * A few VECTOR free loops were replaced with AST_VECTOR_RESET(). * Fixed a meomry leak in pjsip_configuration.c endpoint_destructor caused by not calling ast_sip_security_mechanisms_vector_destroy(). * Fixed a memory leak in res_pjsip_outbound_registration.c add_security_headers() caused by not specifying OBJ_NODATA in an ao2_callback. * Fixed a few ao2_callback return code misuses. Resolves: #845 (cherry picked from commit ca60f7db8f)	1 year ago
Alexei Gradinari	1ec83a5ca4	res_pjsip_sdp_rtp fix leaking astobj2 ast_format ... PR #700 added a preferred_format for the struct ast_rtp_codecs, but when set the preferred_format it leaks an astobj2 ast_format. In the next code ast_rtp_codecs_set_preferred_format(&codecs, ast_format_cap_get_format(joint, 0)); both functions ast_rtp_codecs_set_preferred_format and ast_format_cap_get_format increases the ao2 reference count. Fixes: #856 (cherry picked from commit 95fadcf6db)	1 year ago
Sean Bright	f127b39eab	res_pjsip_logger.c: Fix 'OPTIONS' tab completion. ... Fixes #843 (cherry picked from commit ab9c476dd2)	1 year ago
Mike Bradeen	6e8a5a2332	res_pjsip_notify: add dialplan application ... Add dialplan application PJSIPNOTIFY to send either pre-configured NOTIFY messages from pjsip_notify.conf or with headers defined in dialplan. Also adds the ability to send pre-configured NOTIFY commands to a channel via the CLI. Resolves: #799 UserNote: A new dialplan application PJSIPNotify is now available which can send SIP NOTIFY requests from the dialplan. The pjsip send notify CLI command has also been enhanced to allow sending NOTIFY messages to a specific channel. Syntax: pjsip send notify <option> channel <channel> (cherry picked from commit e7ca7aa881)	1 year ago
Ben Ford	0939d0779c	channel: Add multi-tenant identifier. ... This patch introduces a new identifier for channels: tenantid. It's a stringfield on the channel that can be used for general purposes. It will be inherited by other channels the same way that linkedid is. You can set tenantid in a few ways. The first is to set it in the dialplan with the Set and CHANNEL functions: exten => example,1,Set(CHANNEL(tenantid)=My tenant ID) It can also be accessed via CHANNEL: exten => example,2,NoOp(CHANNEL(tenantid)) Another method is to use the new tenantid option for pjsip endpoints in pjsip.conf: [my_endpoint] type=endpoint tenantid=My tenant ID This is considered the best approach since you will be able to see the tenant ID as early as the Newchannel event. It can also be set using set_var in pjsip.conf on the endpoint like setting other channel variable: set_var=CHANNEL(tenantid)=My tenant ID Note that set_var will not show tenant ID on the Newchannel event, however. Tenant ID has also been added to CDR. It's read-only and can be accessed via CDR(tenantid). You can also get the tenant ID of the last channel communicated with via CDR(peertenantid). Tenant ID will also show up in CEL records if it has been set, and the version number has been bumped accordingly. Fixes: #740 UserNote: tenantid has been added to channels. It can be read in dialplan via CHANNEL(tenantid), and it can be set using Set(CHANNEL(tenantid)=My tenant ID). In pjsip.conf, it is recommended to use the new tenantid option for pjsip endpoints (e.g., tenantid=My tenant ID) so that it will show up in Newchannel events. You can set it like any other channel variable using set_var in pjsip.conf as well, but note that this will NOT show up in Newchannel events. Tenant ID is also available in CDR and can be accessed with CDR(tenantid). The peer tenant ID can also be accessed with CDR(peertenantid). CEL includes tenant ID as well if it has been set. UpgradeNote: A new versioned struct (ast_channel_initializers) has been added that gets passed to __ast_channel_alloc_ap. The new function ast_channel_alloc_with_initializers should be used when creating channels that require the use of this struct. Currently the only value in the struct is for tenantid, but now more fields can be added to the struct as necessary rather than the __ast_channel_alloc_ap function. A new option (tenantid) has been added to endpoints in pjsip.conf as well. CEL has had its version bumped to include tenant ID. (cherry picked from commit 3841fa814e)	1 year ago
Mike Bradeen	40fbf916cd	res_stasis: fix intermittent delays on adding channel to bridge ... Previously, on command execution, the control thread was awoken by sending a SIGURG. It was found that this still resulted in some instances where the thread was not immediately awoken. This change instead sends a null frame to awaken the control thread, which awakens the thread more consistently. Resolves: #801 (cherry picked from commit bdee743cd4)	1 year ago
Tinet-mucw	84e93d1b57	res_pjsip_sdp_rtp.c: Fix DTMF Handling in Re-INVITE with dtmf_mode set to auto ... When the endpoint dtmf_mode is set to auto, a SIP request is sent to the UAC, and the SIP SDP from the UAC does not include the telephone-event. Later, the UAC sends an INVITE, and the SIP SDP includes the telephone-event. In this case, DTMF should be sent by RFC2833 rather than using inband signaling. Resolves: asterisk#826 (cherry picked from commit 6cf6856080)	1 year ago
George Joseph	831d67a3d7	stir_shaken: CRL fixes and a new CLI command ... * Fixed a bug in crypto_show_cli_store that was causing asterisk to crash if there were certificate revocation lists in the verification certificate store. We're also now prefixing certificates with "Cert:" and CRLs with "CRL:" to distinguish them in the list. * Added 'untrusted_cert_file' and 'untrusted_cert_path' options to both verification and profile objects. If you have CRLs that are signed by a different CA than the incoming X5U certificate (indirect CRL), you'll need to provide the certificate of the CRL signer here. Thse will show up as 'Untrusted" when showing the verification or profile objects. * Fixed loading of crl_path. The OpenSSL API we were using to load CRLs won't actually load them from a directory, only a file. We now scan the directory ourselves and load the files one-by-one. * Fixed the verification flags being set on the certificate store. - Removed the CRL_CHECK_ALL flag as this was causing all certificates to be checked for CRL extensions and failing to verify the cert if there was none. This basically caused all certs to fail when a CRL was provided via crl_file or crl_path. - Added the EXTENDED_CRL_SUPPORT flag as it is required to handle indirect CRLs. * Added a new CLI command... `stir_shaken verify certificate_file <certificate_file> [ <profile> ]` which will assist troubleshooting certificate problems by allowing the user to manually verify a certificate file against either the global verification certificate store or the store for a specific profile. * Updated the XML documentation and the sample config file. Resolves: #809 (cherry picked from commit 2fb3215f03)	1 year ago
George Joseph	6aee880515	res_pjsip_config_wizard.c: Refactor load process ... The way we have been initializing the config wizard prevented it from registering its objects if res_pjsip happened to load before it. * We now use the object_type_registered sorcery observer to kick things off instead of the wizard_mapped observer. * The load_module function now checks if res_pjsip has been loaded already and if it was it fires the proper observers so the objects load correctly. Resolves: #816 UserNote: The res_pjsip_config_wizard.so module can now be reloaded. (cherry picked from commit d11dc5247b)	1 year ago
George Joseph	4f01669c7c	res_resolver_unbound: Test for NULL ub_result in unbound_resolver_callback ... The ub_result pointer passed to unbound_resolver_callback by libunbound can be NULL if the query was for something malformed like `.1` or `[.1]`. If it is, we now set a 'ns_r_formerr' result and return instead of crashing with a SEGV. This causes pjproject to simply cancel the transaction with a "No answer record in the DNS response" error. The existing "off nominal" unit test was also updated to check this condition. Although not necessary for this fix, we also made ast_dns_resolver_completed() tolerant of a NULL result. Resolves: GHSA-v428-g3cw-7hv9	1 year ago
Igor Goncharovsky	25d949b03f	res_pjsip_path.c: Fix path when dialing using PJSIP_DIAL_CONTACTS() ... When using the PJSIP_DIAL_CONTACTS() function for use in the Dial() command, the contacts are returned in text form, so the input to the path_outgoing_request() function is a contact value of NULL. The issue was reported in ASTERISK-28211, but was not actually fixed in ASTERISK-30100. This fix brings back the code that was previously removed and adds code to search for a contact to extract the path value from it. (cherry picked from commit aeefedb086)	1 year ago
Mike Bradeen	56f1c20952	res_pjsip_sdp_rtp: Add support for default/mismatched 8K RFC 4733/2833 digits ... After change made in 624f509 to add support for non 8K RFC 4733/2833 digits, Asterisk would only accept RFC 4733/2833 offers that matched the sample rate of the negotiated codec(s). This change allows Asterisk to accept 8K RFC 4733/2833 offers if the UAC offfers 8K RFC 4733/2833 but negotiates for a non 8K bitrate codec. A number of corresponding tests in tests/channels/pjsip/dtmf_sdp also needed to be re-written to allow for these scenarios. Fixes: #776 (cherry picked from commit 7d53986262)	1 year ago
George Joseph	4d5b30ca1c	security_agreement.c: Always add the Require and Proxy-Require headers ... The `Require: mediasec` and `Proxy-Require: mediasec` headers need to be sent whenever we send `Security-Client` or `Security-Verify` headers but the logic to do that was only in add_security_headers() in res_pjsip_outbound_register. So while we were sending them on REGISTER requests, we weren't sending them on INVITE requests. This commit moves the logic to send the two headers out of res_pjsip_outbound_register:add_security_headers() and into security_agreement:ast_sip_add_security_headers(). This way they're always sent when we send `Security-Client` or `Security-Verify`. Resolves: #789 (cherry picked from commit 210fe614b2)	1 year ago
Sean Bright	44ed1cd50d	xml.c: Update deprecated libxml2 API usage. ... Two functions are deprecated as of libxml2 2.12: * xmlSubstituteEntitiesDefault * xmlParseMemory So we update those with supported API. Additionally, `res_calendar_caldav` has been updated to use libxml2's xmlreader API instead of the SAX2 API which has always felt a little hacky (see deleted comment block in `res_calendar_caldav.c`). The xmlreader API has been around since libxml2 2.5.0 which was released in 2003. Fixes #725 (cherry picked from commit f9a359c5c5)	1 year ago
Mike Bradeen	cf564713a4	rtp_engine: add support for multirate RFC2833 digits ... Add RFC2833 DTMF support for 16K, 24K, and 32K bitrate codecs. Asterisk currently treats RFC2833 Digits as a single rtp payload type with a fixed bitrate of 8K. This change would expand that to 8, 16, 24 and 32K. This requires checking the offered rtp types for any of these bitrates and then adding an offer for each (if configured for RFC2833.) DTMF generation must also be changed in order to look at the current outbound codec in order to generate appropriately timed rtp. For cases where no outgoing audio has yet been sent prior to digit generation, Asterisk now has a concept of a 'preferred' codec based on offer order. On inbound calls Asterisk will mimic the payload types of the RFC2833 digits. On outbound calls Asterisk will choose the next free payload types starting with 101. UserNote: No change in configuration is required in order to enable this feature. Endpoints configured to use RFC2833 will automatically have this enabled. If the endpoint does not support this, it should not include it in the SDP offer/response. Resolves: #699 (cherry picked from commit 624f509ce4)	1 year ago
George Joseph	22c3ff2b0c	Revert "res_pjsip_endpoint_identifier_ip: Add endpoint identifier transport address." ... This reverts PR #602 Resolves: #GHSA-qqxj-v78h-hrf9	1 year ago
Fabrice Fontaine	942972b21c	res/stasis/control.c: include signal.h ... Include signal.h to avoid the following build failure with uclibc-ng raised since 2694792e13: stasis/control.c: In function 'exec_command_on_condition': stasis/control.c:313:3: warning: implicit declaration of function 'pthread_kill'; did you mean 'pthread_yield'? [-Wimplicit-function-declaration] 313 | pthread_kill(control->control_thread, SIGURG); | ^~~~~~~~~~~~ | pthread_yield stasis/control.c:313:41: error: 'SIGURG' undeclared (first use in this function) 313 | pthread_kill(control->control_thread, SIGURG); | ^~~~~~ cherry-pick-to: 18 cherry-pick-to: 20 cherry-pick-to: 21 Fixes: #729 (cherry picked from commit c47307567a)	1 year ago
Naveen Albert	f13130bd14	res_pjsip_logger: Preserve logging state on reloads. ... Currently, reloading res_pjsip will cause logging to be disabled. This is because logging can also be controlled via the debug option in pjsip.conf and this defaults to "no". To improve this, logging is no longer disabled on reloads if logging had not been previously enabled using the debug option from the config. This ensures that logging enabled from the CLI will persist through a reload. ASTERISK-29912 #close Resolves: #246 UserNote: Issuing "pjsip reload" will no longer disable logging if it was previously enabled from the CLI. (cherry picked from commit 9fc596aaa7)	1 year ago
Henrik Liljedahl	d1e5e4c4c1	res_pjsip_sdp_rtp.c: Initial RTP inactivity check must consider the rtp_timeout setting. ... First rtp activity check was performed after 500ms regardless of the rtp_timeout setting. Having a call in ringing state for more than rtp_timeout and the first rtp package is received more than 500ms after sdp negotiation and before the rtp_timeout, erronously caused the call to be hungup. Changed to perform the first rtp inactivity check after the timeout setting preventing calls to be disconnected before the rtp_timeout has elapsed since sdp negotiation. Fixes #710 (cherry picked from commit 1423cfee29)	1 year ago
George Joseph	18c0cafa10	stir_shaken: Fix memory leak, typo in config, tn canonicalization ... * Fixed possible memory leak in tn_config:tn_get_etn() where we weren't releasing etn if tn or eprofile were null. * We now canonicalize TNs before using them for lookups or adding them to Identity headers. * Fixed a typo in stir_shaken.conf.sample. Resolves: #716 (cherry picked from commit b7ed77a7c5)	1 year ago
Sperl Viktor	c1d0ea6c38	res_pjsip_endpoint_identifier_ip: Add endpoint identifier transport address. ... Add a new identify_by option to res_pjsip_endpoint_identifier_ip called 'transport' this matches endpoints based on the bound ip address (local) instead of the 'ip' option, which matches on the source ip address (remote). UserNote: set identify_by=transport for the pjsip endpoint. Then use the existing 'match' option and the new 'transport' option of the identify. Fixes: #672 (cherry picked from commit c8769f3d5a)	1 year ago
George Joseph	ba552f876f	res_stir_shaken: Fix compilation for CentOS7 (openssl 1.0.2) ... * OpenSSL 1.0.2 doesn't support X509_get0_pubkey so we now use X509_get_pubkey. The difference is that X509_get_pubkey requires the caller to free the EVP_PKEY themselves so we now let RAII_VAR do that. * OpenSSL 1.0.2 doesn't support upreffing an X509_STORE so we now wrap it in an ao2 object. * OpenSSL 1.0.2 doesn't support X509_STORE_get0_objects to get all the certs from an X509_STORE and there's no easy way to polyfill it so the CLI commands that list profiles will show a "not supported" message instead of listing the certs in a store. Resolves: #676 (cherry picked from commit 16b264d6a9)	1 year ago
George Joseph	800f11649b	Fix incorrect application and function documentation references ... There were a few references in the embedded documentation XML where the case didn't match or where the referenced app or function simply didn't exist any more. These were causing 404 responses in docs.asterisk.org. (cherry picked from commit 9e2179baa1)	1 year ago
Sperl Viktor	d2255002f7	res_pjsip_endpoint_identifier_ip: Endpoint identifier request URI ... Add ability to match against PJSIP request URI. UserNote: this new feature let users match endpoints based on the indound SIP requests' URI. To do so, add 'request_uri' to the endpoint's 'identify_by' option. The 'match_request_uri' option of the identify can be an exact match for the entire request uri, or a regular expression (between slashes). It's quite similar to the header identifer. Fixes: #599 (cherry picked from commit ac297d15f8)	1 year ago
Joshua Elson	fb084a53c4	Implement Configurable TCP Keepalive Settings in PJSIP Transports ... This commit introduces configurable TCP keepalive settings for both TCP and TLS transports. The changes allow for finer control over TCP connection keepalives, enhancing stability and reliability in environments prone to connection timeouts or where intermediate devices may prematurely close idle connections. This has proven necessary and has already been tested in production in several specialized environments where access to the underlying transport is unreliable in ways invisible to the operating system directly, so these keepalive and timeout mechanisms are necessary. Fixes #657 (cherry picked from commit 555eb9d3d2)	1 year ago
Martin Tomec	28afd0ce53	res_pjsip_refer.c: Allow GET_TRANSFERRER_DATA ... There was functionality in chan_sip to get REFER headers, with GET_TRANSFERRER_DATA variable. This commit implements the same functionality in pjsip, to ease transfer from chan_sip to pjsip. Fixes: #579 UserNote: the GET_TRANSFERRER_DATA dialplan variable can now be used also in pjsip. (cherry picked from commit cba82273ae)	1 year ago
Martin Nystroem	583a168082	res_ari.c: Add additional output to ARI requests when debug is enabled ... When ARI debug is enabled the logs will now output http method and the uri. Fixes: #666 (cherry picked from commit dd91f09481)	1 year ago
Holger Hans Peter Freyther	07552cbf05	res_prometheus: Fix duplicate output of metric and help text ... The prometheus exposition format requires each line to be unique[1]. This is handled by struct prometheus_metric having a list of children that is managed when registering a metric. In case the scrape callback is used, it is the responsibility of the implementation to handle this correctly. Originally the bridge callback didn't handle NULL snapshots, the crash fix lead to NULL metrics, and fixing that lead to duplicates. The original code assumed that snapshots are not NULL and then relied on "if (i > 0)" to establish the parent/children relationship between metrics of the same class. This is not workerable as the first bridge might be invisible/lacks a snapshot. Fix this by keeping a separate array of the first metric by class. Instead of relying on the index of the bridge, check whether the array has an entry. Use that array for the output. Add a test case that verifies that the help text is not duplicated. Resolves: #642 [1] https://prometheus.io/docs/instrumenting/exposition_formats/#grouping-and-sorting (cherry picked from commit d45c8e165f)	1 year ago
Naveen Albert	96a9883722	res_parking: Fail gracefully if parking lot is full. ... Currently, if a parking lot is full, bridge setup returns -1, causing dialplan execution to terminate without TryExec. However, such failures should be handled more gracefully, the same way they are on other paths, as indicated by the module's author, here: http://lists.digium.com/pipermail/asterisk-dev/2018-December/077144.html Now, callers will hear the parking failure announcement, and dialplan will continue, which is consistent with existing failure modes. Resolves: #624 (cherry picked from commit e1dfa20797)	1 year ago
Maximilian Fridrich	8409ed1303	res_pjsip_session: Reset pending_media_state->read_callbacks ... In handle_negotiated_sdp the pending_media_state->read_callbacks must be reset before they are added in the SDP handlers in handle_negotiated_sdp_session_media. Otherwise, old callbacks for removed streams and file descriptors could be added to the channel and Asterisk would poll on non-existing file descriptors. Resolves: #611 (cherry picked from commit c5a6d8a6db)	1 year ago
George Joseph	aa23bd9bd7	res_pjsip_stir_shaken.c: Add checks for missing parameters ... * Added checks for missing session, session->channel and rdata in stir_shaken_incoming_request. * Added checks for missing session, session->channel and tdata in stir_shaken_outgoing_request. Resolves: #645	2 years ago
George Joseph	c085753c2e	attestation_config.c: Use ast_free instead of ast_std_free ... In as_check_common_config, we were calling ast_std_free on raw_key but raw_key was allocated with ast_malloc so it should be freed with ast_free. Resolves: #636 (cherry picked from commit 1b94c90524)	2 years ago