2990 Commits (602c4b74b500fb6fbe3ae3f6e13d2502edbdd56c)

Author	SHA1	Message	Date
Richard Mudgett	602c4b74b5	res_pjsip_outbound_registration.c: Fix handle_client_state_destruction() refs ... * handle_client_state_destruction() must always be passed a ref to client_state because it will always unref client_state. handle_registration_response() was not passing a client_state ref. * Made the final un-REGISTER message get sent normally using the pjproject register control structure in handle_client_state_destruction(). The previous code attempted to short circuit the response handling for the module to unload. That doesn't work for a couple reasons. One, pjsip_regc_send() may call the registered callback before it returns and unbalance the client_state ref count. Two, the registered callback handles any authentication for the un-REGISTER message. * Made the distinction between internal registration state and external registration status with sip_outbound_registration_status_str(). This is necessary to avoid altering documented AMI messages with internal changes. * Removed references to client_state->client outside of the serializer thread. When handle_client_state_destruction() destroys the pjproject register control structure that memory is freed and cannot be referenced anymore. These accesses were to provide information for debug and off-nominal warning messages. * In sip_outbound_registration_timer_cb() you should not access entry->id after unrefing client_state because the passed in entry is normally pointing to the timer entry in the client_state object. ASTERISK-24907 Reported by: Kevin Harwell Change-Id: Ia7b446d8644b6b4550ef5bea49527671de65183f	10 years ago
Richard Mudgett	8c6a95a9ac	res_pjsip_outbound_registration.c: Use ast_sorcery_object_unregister() API ... The sorcery pjsip 'registration' config object needs to be destroyed on module unload. Otherwise, a reload of res_pjsip could try to use callbacks for a previously unloaded instance of the module provided by ast_sorcery_object_register() or one of the variants. Also, if res_pjsip_outbound_registration were subsequently reloaded, the sorcery config field objects would be registered in sorcery twice. ASTERISK-24907 Reported by: Kevin Harwell Change-Id: I304fad13dece2604af48353f6c6d9d5c7b064697	10 years ago
Richard Mudgett	4313f32969	res_pjsip_outbound_registration.c: Reorder load_module() and unload_module(). ... It is best if the loading code creates and initializes the module's infrastructure before letting the system know of its existence. The unloading code needs to reverse the actions of the loading code and in the reverse order. ASTERISK-24907 Reported by: Kevin Harwell Change-Id: I5d151383e9787b5b60aa5e1627b10f040acdded4	10 years ago
Mark Michelson	db0521f905	Merge "res_pjsip_mwi: Set up unsolicited MWI upon registration." into 13	10 years ago
Joshua Colp	80e82dc97f	res_pjsip_mwi: Set up unsolicited MWI upon registration. ... The res_pjsip_mwi previously required a reload to set up the proper subscriptions to allow unsolicited MWI to work. This change makes it so the act of registering will also cause this to occur. This is particularly useful if realtime is involved as no reload needs to occur within Asterisk to cause the MWI information to get sent. ASTERISK-25180 #close Change-Id: Id847b47de4b8b3ab8858455ccc2f07b0f915f252	10 years ago
Richard Mudgett	036bc0012f	res_pjsip_outbound_registration.c: Add missing line endings to CLI commands ... Change-Id: I39ae612746d892d2dbe86f3ff2d7027fa1da57f7	10 years ago
Richard Mudgett	bec7435945	res_pjsip_outbound_registration.c: Eliminate simple RAII_VAR() usage. ... Change-Id: I399cb9d61bbba706b48c98e0bf75e98984cd9a9e	10 years ago
Richard Mudgett	c2519fdf1c	res_pjsip_outbound_registration.c: Misc code cleanups. ... * Break some long lines. * Fix doxygen comment. Change-Id: I8f12ba6822f84d5e7bb575280270cd7e2fefb305	10 years ago
Mark Michelson	9015bb4c8c	Resolve race conditions involving Stasis bridges. ... This resolves two observed race conditions. First, a bit of background on what the Stasis application does: 1a Creates a stasis_app_control structure. This structure is linked into a global container and can be looked up using a channel's unique ID. 2a Puts the channel in an event loop. The event loop can exit either because the stasis_app_control structure has been marked done, or because of some other factor, such as a hangup. In the event loop, the stasis_app_control determines if any specific ARI commands need to be run on the channel and will run them from this thread. 3a Checks if the channel is bridged. If the channel is bridged, then ast_bridge_depart() is called since channels that are added to Stasis bridges are always imparted as departable. 4a Unlink the stasis_app_control from the container. When an ARI command is received by Asterisk, the following occurs 1b A thread is spawned to handle the HTTP request 2b The stasis_app_control(s) that corresponds to the channel(s) in the request is/are retrieved. If the stasis_app_control cannot be retrieved, then it is assumed that the channel in question has exited the Stasis app or perhaps was never in Stasis in the first place. 3b A command is queued onto the stasis_app_control, and the channel's event loop thread is signaled to run the command. 4b While most ARI commands do nothing further, some, such as adding or removing channels from a bridge, will block until the command they issued has been completed by the channel's event loop. The first race condition that is solved by this patch involves a crash that can occur due to faulty detection of the channel's bridged status in step 3a. What can happen is that in step 2a, the event loop may run the ast_bridge_impart() function to asynchronously place the channel into a bridge, then immediately exit the event loop because the channel has hung up. In step 3a, we would detect that the channel was not bridged and would not call ast_bridge_depart(). The reason that the channel did not appear to be bridged was that the depart_thread that is spawned by ast_bridge_impart() had not yet started. That is the thread where the channel is marked as being bridged. Since we did not call ast_bridge_depart(), the Stasis application would exit, and then the channel would be destroyed Then the depart_thread would start up and try to manipulate the destroyed channel, causing a crash. The fix for this is to switch from using ast_channel_is_bridged() to checking the NULLity of ast_channel_internal_bridge_channel() to determine if ast_bridge_depart() needs to be called. The channel's internal bridge_channel is set when ast_bridge_impart() is called and is NULLed by the call to ast_bridge_depart(). If the channel's internal bridge_channel is non-NULL, then the channel must have been imparted into the bridge and needs to be departed, even if the actual bridging operation has not yet started. By departing the channel when necessary, the thread that is running the Stasis application will block until the bridge gives the okay that the depart_thread has exited. The second race condition that is solved by this patch involves a leak of HTTP handler threads. The problem was that step 2b would successfully retrieve a stasis_app_control structure. Then step 2a would exit the channel from the event loop due to a hangup. Steps 3a and 4a would execute, and then finally steps 3b and 4b would. The problem is that at step 4b, when attempting to add a channel to a bridge, the thread would block forever since the channel would never execute the queued command since it was finished with the event loop. This meant that the HTTP handling thread would be leaked, along with any references that thread may have owned (in my case, I was seeing bridges leaked). The fix for this is to hone in better on when the channel has exited the event loop. The stasis_app_control structure has an is_done field that is now set at each point where the channel may exit the event loop. If step 2b retrieves a valid stasis_app_control structure but the control is marked as done, then the attempted operation exits immediately since there will be nothing to service the attempted command. ASTERISK-25091 #close Reported by Ilya Trikoz Change-Id: If66265b73b4c9f8f58599124d777fedc54576628	10 years ago
Mark Michelson	723a9d4225	Parking: Add documentation for AMI ParkedCallSwap event. ... This event was added some time ago in order to clarify when a channel took the place of another channel in a parking lot. However, there was no XML documentation added for the event. This patch adds the XML documentation. ASTERISK-24900 #close Reported by Rusty Newton Change-Id: I4cfe7777c4b94bbff91c9221c6096a7a02a92eac	10 years ago
Kevin Harwell	31c77b157b	res_pjsip: Add option to force G.726 to be treated as AAL2 packed. ... Some phones send g.726 audio packed for AAL2, which differs from what is recommended by RFC 3351. If Asterisk receives audio formatted as such when negotiating g.726 then it sounds a bit distorted. Added an option to res_pjsip_endpoint that allows g.726 negotiated audio to be treated as g.726 AAL2 packed. ASTERISK-25158 #close Reported by: Steve Pitts Change-Id: Ie7e21f75493d7fe53e75e12c971e72f5afa33615	10 years ago
Ivan Poddubny	8af6c9cf6b	res_pjsip_transport_websocket: Fix use-after-free bugs. ... This patch fixes use-after-free bugs caught by AddressSanitizer. 1. PJSIP transport manager may decide to destroy transport on its own. For example, when the contact registered via websocket has not renewed its registration in time. The transport was destoyed, but the websocket listener thread was still active until the socket closes, and then tried to call transport_shutdown on transport that has been freed. Also, the transport destructor accessed wstransport->rdata.tp_info.pool right after freeing memory that contained wstransport itself. This patch converts transport to an ao2 object, allowing it to be refcounted, so that it is available until both websocket listener and pjsip transport manager are finished with it. 2. The websocket listener deletes the last reference on websocket session when the tcp connection is closed, and it gets destroyed, but the transport manager may still use it, for example when disconnect happens in the middle of a SIP transaction. A new reference to websocket session has been added that is released with the transport to prevent this. ASTERISK-25096 #close Reported by: Josh Kitchens ASTERISK-24963 #close Reported by: Badalian Vyacheslav Change-Id: Idc0b63eb6e459c1ddfb2430127d34b3c4d8d373b	10 years ago
Joshua Colp	720251f2b8	Merge "Fixes for OS X" into 13	10 years ago
Mark Michelson	88212ccb7f	res_pjsip: Prevent access of NULL channels. ... It is possible to receive incoming requests or responses after the channel on an ast_sip_session has been destroyed and NULLed out. Handlers of these sorts of requests or responses need to be prepared for the possibility that the channel is NULL or else they could cause a crash. While several places have been amended to deal with NULL channels, there were still a couple of places that needed updating. res_pjsip_dtmf_info.c: When handling incoming INFO requests, we need to return early if there is no channel on the session. res_pjsip_session.c: When handling a 302 response, we need to stop the redirecting attempt if there is no channel on the session. ASTERISK-25148 #close reported by Mark Michelson Change-Id: Id1a75ffc3d0eaa168b0b28188fb54d6cf9fc47a9	10 years ago
George Joseph	5dc9fb4198	res_pjsip/location: Fix ref leak in contact_apply_handler ... contact_apply_handler calls ast_res_pjsip_find_or_create_contact_status to force the creation of a contact_status object whenever a new contact is added but it didn't unref the returned object. Added an ao2_cleanup(status) to plug the leak. ASTERISK-25141 Change-Id: Icc1401cae142855a1abc86ab5179dfb3ee861c40 Reported-by: Corey Farrell	10 years ago
David M. Lee	d908272b7e	Fixes for OS X ... * Add some type casting so tv_usec can really be a long, instead of some strange platform specific type. * Add some .dylib style files to .gitignore. * Switch from using -Xlinker to -Wl,. For [reasons unknown][], newer versions of GCC, when compiling the Homebrew formula for Asterisk, are not properly passing the -Xlinker options to the linker. Given that -Wl, does exactly the [same thing][], and does it properly, this patch changes the -Xlinker options to use -Wl, instead. [reasons unknown]: http://bit.ly/1SUbEYx [same thing]: https://gcc.gnu.org/onlinedocs/gcc/Link-Options.html Change-Id: Id5e6b3c6cc86282ea5fca630dc3991137c5bf4dd	10 years ago
Matt Jordan	bc70904c05	Merge "res_pjsip_session: Fix in-dialog authentication." into 13	10 years ago
Corey Farrell	9e7827e3ac	pjsip_configuration: Fix leak in persistent_endpoint_update_state. ... The loop to find the first available contact of an endpoint grabbed contact from the iterator, then checked for offline state. This caused the first contact after the state was found to leak a reference. ASTERISK-25141 Change-Id: Id0f1d87410fc63742db0594eb4b18b36e99aec08	10 years ago
George Joseph	857166b5e5	res_pjsip/location: Fix memory leak in permanent_uri_handler ... When permanent_uri_handler was creating the contact status object for each contact, it wasn't unreffing it at the end of the loop. ASTERISK-25141 #close Reported-by: Corey Farrell Change-Id: I7bb127994677bb3d459f87952f8425c9b9967b12	10 years ago
Richard Mudgett	fe21f2e52f	res_pjsip_session: Fix in-dialog authentication. ... When the remote peer requires authentication for in-dialog requests then re-INVITEs to the peer cause the call to be disconnected and other in-dialog requests to the peer like MESSAGE just don't go through. * Made session_inv_on_tsx_state_changed() handle in-dialog authentication for re-INVITEs and other methods. Initial INVITEs cannot be handled here because the INVITE transaction must be restarted earlier. * Pulled needed code from res/res_pjsip/pjsip_outbound_auth.c in preparation for removing the file. The generic outbound authentication code did not work as well as anticipated. * Created outbound_invite_auth() to only handle initial outbound INVITEs. Re-INVITEs cannot be handled here. The re-INVITE transaction is still in progress and the PJSIP library cannot handle the overlapping INVITE transactions. Other method types should not be handled here as this code only works on outgoing calls and we need to handle incoming and outgoing calls. ASTERISK-25131 #close Reported by: Richard Mudgett Change-Id: I12bdd7ddccc819b4ce4b091e826d1e26334601b0	10 years ago
George Joseph	262d590819	res_pjsip: Add AMI events for chan_pjsip contact lifecycle changes ... Add a new ContactStatus AMI event. Publish the following status/state changes: Created Removed Reachable Unreachable Unknown Contact URI, new status/state, aor and endpoint names, and the last qualify rtt result are included in the event. ASTERISK-25114 #close Change-Id: Id25aae5f7122facba183273efb3e8f36c20fb61e Reported-by: George Joseph <george.joseph@fairview5.com> Tested-by: George Joseph <george.joseph@fairview5.com>	10 years ago
Matt Jordan	b9826bf101	Merge "Stasis: Fix unsafe use of stasis_unsubscribe in modules." into 13	10 years ago
Ivan Poddubny	554bd1e39c	res_pjsip_transport_websocket: Fix crash on receiving large SIP packets ... Incoming SIP packets larger than PJSIP_MAX_PKT_LEN were themselves truncated before passing to pjsip_tpmgr_receive_packet, but the length was passed unaltered, thus causing memory corruption and segfault. ASTERISK-25122 #close Change-Id: I608a6b6b7f229eacc33a0a7d771d18e27e5b08ab	10 years ago
Corey Farrell	0d266cbe02	Stasis: Fix unsafe use of stasis_unsubscribe in modules. ... Many uses of stasis_unsubscribe in modules can be reached through unload. These have been switched to stasis_unsubscribe_and_join. Some subscription callbacks do nothing, for these I've created a noop callback function in stasis.c. This is used by some modules that monitor MWI topics in order to enable cache, since the callback does not become invalid after dlclose it is safe to use stasis_unsubscribe on these, even during module unload. ASTERISK-25121 #close Change-Id: Ifc2549fbd8eef7d703c222978e8f452e2972189c	10 years ago
Matt Jordan	eaabc4d04c	Merge "res/res_pjsip_pubsub: Note that 'dialog' is also a valid event type for RLS" into 13	10 years ago
Matt Jordan	4690bc81f7	Merge "res/res_pjsip_exten_state: Fix confusing NOTICE message" into 13	10 years ago
Matt Jordan	51ffed5e61	res/res_pjsip_pubsub: Note that 'dialog' is also a valid event type for RLS ... In addition to specifying lists of 'presence' and 'message-summary', users can also create lists of type 'dialog'. These should be treated in the same fashion as 'presence'. Change-Id: I583bb69cd9f88b0b29bf09ddaddeac4e84189f6e	10 years ago
Matt Jordan	7950b65e4f	res/res_pjsip_exten_state: Fix confusing NOTICE message ... When a SUBSCRIBE request is made to a dialplan hint that doesn't exist, the current NOTICE message informing users of this swaps the context and extension parameters. This can cause a bit of confusion. Thanks to CptBurger in #asterisk for helping to point this out. Change-Id: Ie584d1a58ae217385c87a450ca25b55ca0e36e43	10 years ago
Matt Jordan	ea8620a51b	Merge "res/ari: Register Stasis application on WebSocket attempt" into 13	10 years ago
Matt Jordan	5ac65ddfb4	res/ari: Register Stasis application on WebSocket attempt ... Prior to this patch, when a WebSocket connection is made, ARI would not be informed of the connection until after the WebSocket layer had accepted the connection. This created a brief race condition where the ARI client would be notified that it was connected, a channel would be sent into the Stasis dialplan application, but ARI would not yet have registered the Stasis application presented in the HTTP request that established the WebSocket. This patch resolves this issue by doing the following: * When a WebSocket attempt is made, a callback is made into the ARI application layer, which verifies and registers the apps presented in the HTTP request. Because we do not yet have a WebSocket, we cannot have an event session for the corresponding applications. Some defensive checks were thus added to make the application objects tolerant to a NULL event session. * When a WebSocket connection is made, the registered application is updated with the newly created event session that wraps the WebSocket connection. ASTERISK-24988 #close Reported by: Joshua Colp Change-Id: Ia5dc60dc2b6bee76cd5aff0f69dd53b36e83f636	10 years ago
Joshua Colp	1b475a8410	Merge "res_pjsip: Refactor endpt_send_transaction (qualify_timeout)" into 13	10 years ago
Matt Jordan	02dfb118ba	Merge "res_pjsip_outbound_registration: Check request URI for line." into 13	10 years ago
George Joseph	60e2fbfe62	res_pjsip: Refactor endpt_send_transaction (qualify_timeout) ... This patch refactors the transaction timeout processing to eliminate calling the lower level public pjsip functions and reverts to calling pjsip_endpt_send_request again. This is the result of me noticing a possible incompatibility with pjproject-2.4 which was causing contact status flapping. The original version of this feature used the lower level calls to get access to the tsx structure in order to cancel the transaction when our own timer expires. Since we no longer have that access, if our own timer expires before the pjsip timer, we call the callbacks and just let the pjsip transaction take it's own course. When the transaction ends, it discovers the callbacks have already been run and just cleans itself up. A few messages in pjsip_configuration were also added/cleaned up. ASTERISK-25105 #close Change-Id: I0810f3999cf63f3a72607bbecac36af0a957f33e Reported-by: George Joseph <george.joseph@fairview5.com> Tested-by: George Joseph <george.joseph@fairview5.com>	10 years ago
demon-ru	42476e6633	res_pjsip_outbound_registration: Check request URI for line. ... When an inbound call is received the To header is checked for the "line" option. Some remote servers will place this in the request URI instead. This adds an additional check for the option in the request URI. ASTERISK-25072 #close Reported by: Dmitriy Serov Change-Id: Id4e44debbb80baad623b914a88574371575353c8	10 years ago
Corey Farrell	e7edb59db6	res_mwi_external_ami: Use module version of AMI registration. ... Use ast_manager_register_xml for res_mwi_external_ami manager actions. This ensures the module is held open while any of the actions are being run. ASTERISK-25117 #close Reported by: Corey Farrell Change-Id: Iececfdc2da498b2c32b9e09042f5f12292007ac7	10 years ago
Matt Jordan	31cc24aad6	res/res_http_websocket: Add a pre-session established callback ... This patch updates http_websocket and its corresponding implementation with a pre-session established callback. This callback allows for WebSocket server consumers to be notified when a WebSocket connection is attempted, but before we accept it. Consumers can choose to reject the connection, if their application specific logic allows for it. As a result, this patch pulls out the previously private websocket_protocol struct and makes it public, as ast_websocket_protocol. In order to preserve backwards compatibility with existing modules, the existing APIs were left as-is, and new APIs were added for the creation of the ast_websocket_protocol as well as for adding a sub-protocol to a WebSocket server. In particular, the following new API calls were added: * ast_websocket_add_protocol2 - add a protocol to the core WebSocket server * ast_websocket_server_add_protocol2 - add a protocol to a specific WebSocket server * ast_websocket_sub_protocol_alloc - allocate a sub-protocol object. Consumers can populate this with whatever callbacks they wish to support, then add it to the core server or a specified server. ASTERISK-24988 Reported by: Joshua Colp Change-Id: Ibe0bbb30c17eec6b578071bdbd197c911b620ab2	10 years ago
George Joseph	dd78ab42e4	res_pjsip_config_wizard/config: Fix template processing ... The config wizard was always pulling the first occurrence of a variable from an ast_variable list but this gets the template value from the list instead of any overridden value. This patch creates ast_variable_find_last_in_list() in config.c and updates res_pjsip_config_wizard to use it instead of ast_variable_find_in_list. Now the overridden values, where they exist, are used instead of template variables. Updated test_config to test the new API. ASTERISK-25089 #close Reported-by: George Joseph <george.joseph@fairview5.com> Tested-by: George Joseph <george.joseph@fairview5.com> Change-Id: Ifa7ddefc956a463923ee6839dd1ebe021c299de4	10 years ago
Yousf Ateya	16f602f5c2	res_rtp_asterisk: Correction for the limit which detects that a packet is DTLS. ... First byte of DTLS packet shall be in range 20-63, not 20-64. Refer to RFC https://tools.ietf.org/html/rfc5764#section-5.1.2 for correct values. Change-Id: Iae6fa0d72b37c36a27fe40686e0ae6fba3afec31	10 years ago
Sean Bright	613a461c3d	res_rtp_asterisk: Issue ERROR if res_srtp is not found. ... While trying to get WebRTC working with chan_pjsip, I was running into the following error: Attempted to set an invalid DTLS-SRTP configuration on RTP instance... Josh helpfully pointed out that res_srtp.so might not be loaded, and sure enough, it wasn't. This patch adds a ERROR indiciating as much to hopefully help others having a similar problem. Change-Id: I13aa477b47b299876728a21b130998a0ea6cd19f	10 years ago
Joshua Colp	d649d682c4	res_pjsip_exten_state: Fix race condition between sending NOTIFY and termination ... The res_pjsip_exten_state module currently has a race condition between processing the extension state callback from the PBX core and processing the subscription shutdown callback from res_pjsip_pubsub. There is currently no synchronization between the two. This can present a problem as while the SIP subscription will remain valid the tree it points to may not. This is in particular a problem as a task to send a NOTIFY may get queued which will try to use the tree that may no longer be valid. This change does the following to fix this problem: 1. All access to the subscription tree is done within the task that sends the NOTIFY to ensure that no other thread is modifying or destroying the tree. This task executes on the serializer for the subscriptions. 2. A reference to the subscription serializer is kept to ensure it remains valid for the lifetime of the extension state subscription. 3. The NOTIFY task has been changed so it will no longer attempt to send a NOTIFY if the subscription has already been terminated. ASTERISK-25057 #close Reported by: Matt Jordan Change-Id: I0b3cd2fac5be8d9b3dc5e693aaa79846eeaf5643	10 years ago
Kevin Harwell	68513e00f7	res_stasis_snoop: Spying on a single direction continually increases CPU ... Creating a snoop channel in ARI and spying only on a single direction (in or out) results in CPU utilization continually increasing until the CPU is fully consumed. This occurs because frames are being put in the opposing direction's slin factory queue, but not being removed. Fixed the problem by always reading and disposing of frames from the opposite queue of the direction selected. ASTERISK-24938 #closes Change-Id: I935bfd15f1db958f364d9d6b3b45582c0113dd60	10 years ago
Corey Farrell	366ea63438	res_ari_bridges: Add missing dependencies. ... Missed this module in the previous commit. res_ari_bridges uses symbols from res_stasis_playback and res_stasis_recording. ASTERISK-25027 #close Reported by: Corey Farrell Change-Id: I90bf756abd25adfc4920d2869ebe7feb636b8c5f	10 years ago
Matt Jordan	743fed71fc	Merge "res_odbc: Use negative connection cache for all connections" into 13	10 years ago
Martin Tomec	3dcec04ab5	res_odbc: Use negative connection cache for all connections ... Apply the negative connection cache setting to all connections, even those that are not pooled. This ensures that the connection will not be re-established before the negative connection cache time is met. ASTERISK-22708 #close Change-Id: I431cc2e8584ab0b6908b3523d0a0e18c9a527271	10 years ago
Corey Farrell	63196a8256	res_pjsip_dlg_options: Fix MODULEINFO section. ... Removed the extra space before "MODULEINFO" in res_pjsip_dlg_options. This extra space prevented any of the dependencies from being seen by menuselect, so building with default options would fail if PJSIP was not installed. This also makes the tool that extracts information for menuselect tolerant of multiple spaces in the future. ASTERISK-25033 #close Reported by: Peter Whisker Change-Id: Iccd54846f70c4a7a50cb5bf70b7bb5cb4bab3698	10 years ago
Matt Jordan	ec0f80b6e8	Merge "res_pjsip_outbound_authenticator_digest: Add missing outbound authenticator callback." into 13	10 years ago
Mark Michelson	4b8cddfb36	res_pjsip_outbound_authenticator_digest: Add missing outbound authenticator callback. ... The Asterisk 13 version of the fix for outbound registration was missing a key component that set the outbound authenticator's callback that creates an authenticated request based on an old request. This was picked up by some outbound registration tests failing in the testsuite. Change-Id: I5ca9379698c606da36bc38eaffccedaf64211ce3	10 years ago
Joshua Colp	415a0d0745	res_ari_device_states: Fix dependency on res_stasis_device_state. ... The res_ari_device_states module depends on res_stasis_device_state, not res_stasis_device_states. Change-Id: I26e02ad37f9e36bcc859867e2fad1b90452ec3de	10 years ago
Matt Jordan	d1bc86fc99	Merge "res_pjsip_outbound_registration: Add virtual line support." into 13	10 years ago
Joshua Colp	e332c7ed5e	res_pjsip_outbound_registration: Fix double unref on error return. ... When the PJSIP pjsip_regc_send function is invoked and an error status returned the caller currently decrements the reference count of the client state that it just incremented, assuming the registration callback would not have been invoked. In practice this is not correct. If the failure happens after the transaction has been set up the callback will still be invoked. This will cause the reference count to be incorrectly decremented twice, once by the registration callback and second by the caller of pjsip_regc_send. This change makes it so that whether the callback is invoked or not is known by the caller of pjsip_regc_send. Depending on this it can know whether it is responsible for decrementing the reference count of the client state or not. ASTERISK-25037 #close Reported by: Joshua Colp Change-Id: I749dc12f3a22115c49c5d7d95ff42a5fa45319de	10 years ago