This adds a generic API for accommodating IPv6 and IPv4 addresses
within Asterisk. While many files have been updated to make use of the
API, chan_sip and the RTP code are the files which actually support
IPv6 addresses at the time of this commit. The way has been paved for
easier upgrading for other files in the near future, though.
Big thanks go to Simon Perrault, Marc Blanchet, and Jean-Philippe Dionne
for their hard work on this.
(closes issue #17565)
Reported by: russell
Patches:
asteriskv6-test-report.pdf uploaded by russell (license 2)
Review: https://reviewboard.asterisk.org/r/743
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@274783 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The external test suite stops Asterisk using the "core stop gracefully" command.
The logs from the tests show that there are a number of problems with Asterisk
trying to cleanly shut down. This patch addresses the following type of error
that comes from chan_iax2:
[Jun 22 16:58:11] ERROR[29884]: lock.c:129 __ast_pthread_mutex_destroy:
chan_iax2.c line 11371 (iax2_process_thread_cleanup):
Error destroying mutex &thread->lock: Device or resource busy
For an example in the context of a build, see:
http://bamboo.asterisk.org/browse/AST-TRUNK-739/log
The primary purpose of this patch is to change the thread pool shutdown
procedure to be more explicit to ensure that the thread exits from a point
where it is not holding a lock. While testing that, I encountered various
crashes due to the order of operations in unload_module() being problematic.
I reordered some things there, as well.
Review: https://reviewboard.asterisk.org/r/736/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@272370 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r270866 | dvossel | 2010-06-16 12:35:29 -0500 (Wed, 16 Jun 2010) | 22 lines
fixes chan_iax2 race condition
There is code in chan_iax2.c that attempts to guarantee that only a single
active thread will handle a call number at a time. This code works once
the thread is added to an active_list of threads, but we are not currently
guaranteed that a newly activated thread will enter the active_list immediately
because it is left up to the thread to add itself after frames have been
queued to it. This means that if two frames come in for the same call number
at the same time, it is possible for them to grab two separate threads because
the first thread did not add itself to the active_list fast enough. This
causes some pretty complex problems.
This patch resolves this race condition by immediately adding an activated
thread to the active_list within the network thread and only depending on
the thread to remove itself once it is done processing the frames queued to
it. By doing this we are guaranteed that if another frame for the same call
number comes in at the same time, that this thread will immediately be found
in the active_list of threads.
Review: https://reviewboard.asterisk.org/r/720/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@270867 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After 5 years in mantis and over a year on reviewboard, SRTP support is finally
being comitted. This includes generic CHANNEL dialplan functions that work for
getting the status of whether a call has secure media or signaling as defined
by the underlying channel technology and for setting whether or not a new
channel being bridged to a calling channel should have secure signaling or
media. See doc/tex/secure-calls.tex for examples.
Original patch by mikma, updated for trunk and revised by me.
(closes issue #5413)
Reported by: mikma
Tested by: twilson, notthematrix, hemanshurpatel
Review: https://reviewboard.asterisk.org/r/191/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@268894 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Very unfortunate things happen if we add an iax_frame
to the frame queue and let go of the lock before scheduling
the frame's transmit... There is a race condition that
exists where the frame can be removed from the frame_queue
and freed before the transmit is scheduled if we do not
hold on to that lock. This results in a freed frame
being scheduled for transmit later.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@263151 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r250394 | dvossel | 2010-03-03 12:02:27 -0600 (Wed, 03 Mar 2010) | 16 lines
fixes problem with duplicate TXREQ packets
When Asterisk receives an IAX2 TXREQ packet, try_transfer()
will call store_by_transfercallno() to link the chan_iax2_pvt
struct into iax_transfercallno_pvts. If a duplicate TXREQ
packet is received for the same call, the pvt struct will be
linked into iax_transfercallno_pvts multiple times. This patch
fixes this. Thanks rain for debugging this and providing a patch!
(closes issue #16904)
Reported by: rain
Patches:
iax2-double-txreq-fix.diff uploaded by rain (license 327)
Tested by: rain, dvossel
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@250395 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r245792 | dvossel | 2010-02-09 16:55:38 -0600 (Tue, 09 Feb 2010) | 12 lines
Fixes iaxs and iaxsl size off by one issue.
2^15 = 32768 which is the maximum allowed iax2 callnumber.
Creating the iaxs and iaxsl array of size 32768 means the maximum
callnumber is actually out of bounds. This causes a nasty crash.
(closes issue #15997)
Reported by: exarv
Patches:
iax_fix.diff uploaded by dvossel (license 671)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@245793 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When this patch was originally submitted, the code allowed for the token to be
set via a channel variable. I decided that a cleaner approach would be to
integrate it into the CHANNEL() function. Unfortunately, that is not a suitable
approach. It's not possible to get the value set on the channel soon enough
using that method. So, go back to the simple channel variable method.
(closes issue #16711)
Reported by: homesick
Patches:
iax-svn.diff uploaded by homesick (license 91)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243482 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fixes a crash on Solaris.
(closes issue #16572)
Reported by: crjw
Patches:
frame_changes.patch uploaded by crjw (license 963)
Plus several others found and fixed by me
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@239074 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r238411 | dvossel | 2010-01-07 14:14:25 -0600 (Thu, 07 Jan 2010) | 10 lines
fixes crash in "scheduled_destroy" in chan_iax
A signed short was used to represent a callnumber. This is makes
it possible to attempt to access the iaxs array with a negative
index.
(closes issue #16565)
Reported by: jensvb
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@238412 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r230246 | kpfleming | 2009-11-15 11:19:06 -0600 (Sun, 15 Nov 2009) | 6 lines
Correct mistaken option name in error message.
The configuration option for allowing hosts to make non-token-based calls
is 'calltokenoptional', not 'calltokenignore'. (reported on asterisk-users)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@230247 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r225243 | dvossel | 2009-10-21 15:58:08 -0500 (Wed, 21 Oct 2009) | 13 lines
IAX2: VNAK loop caused by signaling frames with no destination call number
It is possible for the PBX thread to queue up signaling frames before
a destination call number is received. This can result in signaling
frames being sent out with no destination call number. Since recent
versions of Asterisk require accurate destination callnumbers for all
Full Frames, this can cause a VNAK loop to occur. To resolve this
no signaling frames are sent until a destination callnumber is received,
and destination call numbers are now only required for iax_pvt matching
when the frame is an ACK.
Review: https://reviewboard.asterisk.org/r/413/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225307 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r225032 | dvossel | 2009-10-21 09:37:04 -0500 (Wed, 21 Oct 2009) | 20 lines
IAX/SIP shrinkcallerid option
The shrinking of caller id removes '(', ' ', ')', non-trailing '.',
and '-' from the string. This means values such as 555.5555 and
test-test result in 555555 and testtest. There are instances,
such as Skype integration, where a specific value is passed via
caller id that must be preserved unmodified. This patch makes
the shrinking of caller id optional in chan_sip and chan_iax in
order to support such cases. By default this option is on to
preserve previous expected behavior.
(closes issue #15940)
Reported by: dimas
Patches:
v2-15940.patch uploaded by dimas (license 88)
15940_shrinkcallerid_trunk.c uploaded by dvossel (license 671)
Tested by: dvossel
Review: https://reviewboard.asterisk.org/r/408/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225033 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r222152 | kpfleming | 2009-10-05 20:16:36 -0500 (Mon, 05 Oct 2009) | 20 lines
Fix ao2_iterator API to hold references to containers being iterated.
See Mantis issue for details of what prompted this change.
Additional notes:
This patch changes the ao2_iterator API in two ways: F_AO2I_DONTLOCK
has become an enum instead of a macro, with a name that fits our
naming policy; also, it is now necessary to call
ao2_iterator_destroy() on any iterator that has been
created. Currently this only releases the reference to the container
being iterated, but in the future this could also release other
resources used by the iterator, if the iterator implementation changes
to use additional resources.
(closes issue #15987)
Reported by: kpfleming
Review: https://reviewboard.asterisk.org/r/383/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@222176 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r219519 | dvossel | 2009-09-18 18:19:50 -0500 (Fri, 18 Sep 2009) | 9 lines
iax2 frame double free
The iax frame's retrans sched id was written over right
before iax2_frame_free was called. In iax2_frame_free that
retrans id is used to delete the sched item. By writing over
the retrans field before the sched item could be deleted, it was
possible for a retransmit to occur on a freed frame.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@219520 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In the course of this, I also found that the results of ast_gethostbyname
were being used incorrectly in both chan_iax2 and chan_sip, so both have
been fixed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@217916 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r217806 | dvossel | 2009-09-10 16:06:07 -0500 (Thu, 10 Sep 2009) | 22 lines
IAX2 encryption regression
The IAX2 Call Token security patch inadvertently broke the use of
encryption due to the reorganization of code in the socket_process()
function. When encryption is used, an incoming full frame must first
be decrypted before the information elements can be parsed. The
security release mistakenly moved IE parsing before decryption in
order to process the new Call Token IE. To resolve this, decryption
of full frames is once again done before looking into the frame. This
involves searching for an existing callno, checking the pvt to see if
encryption is turned on, and decrypting the packet before the internal
fields of the full frame are accessed.
(closes issue #15834)
Reported by: karesmakro
Patches:
iax2_encryption_fix_1.4.diff uploaded by dvossel (license 671)
Tested by: dvossel, karesmakro
Review: https://reviewboard.asterisk.org/r/355/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@217807 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r208746 | jpeeler | 2009-07-25 01:19:50 -0500 (Sat, 25 Jul 2009) | 7 lines
Fix compiling under dev-mode with gcc 4.4.0.
Mostly trivial changes, but I did not know of any other way to fix the
"dereferencing type-punned pointer will break strict-aliasing rules" error
without creating a tmp variable in chan_skinny.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@208749 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r206385 | russell | 2009-07-14 09:48:00 -0500 (Tue, 14 Jul 2009) | 13 lines
Merged revisions 206384 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r206384 | russell | 2009-07-14 09:45:47 -0500 (Tue, 14 Jul 2009) | 6 lines
Ensure apathetic replies are sent out on the proper socket.
chan_iax2 supports multiple address bindings. The send_apathetic_reply()
function did not attempt to send its response on the same socket that the
incoming message came in on.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@206386 65c4cc65-6c06-0410-ace0-fbb531ad65f3
CEL is the new system for logging channel events. This was inspired after
facing many problems trying to represent what is possible to happen to a call
in Asterisk using CDR records. For more information on CEL, see the built in
HTML or PDF documentation generated from the files in doc/tex/.
Many thanks to Steve Murphy (murf) and Brian Degenhardt (bmd) for their hard
work developing this code. Also, thanks to Matt Nicholson (mnicholson) and
Sean Bright (seanbright) for their assistance in the final push to get this
code ready for Asterisk trunk.
Review: https://reviewboard.asterisk.org/r/239/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203638 65c4cc65-6c06-0410-ace0-fbb531ad65f3
chan_sip has an option to save the sysname on rtupdate. This patch copies that same logic to chan_iax.
(closes issue #14837)
Reported by: barthpbx
Patches:
iax2-rtsavesysname.patch uploaded by barthpbx (license 744)
rt_iax.diff uploaded by dvossel (license 671)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@201534 65c4cc65-6c06-0410-ace0-fbb531ad65f3
These modules all contained variables that are module-global but not system-global,
but were not marked 'static'.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@200587 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Iax2 currently does not support native bridging if the timeoutms value is set. We check for that in iax2_bridge, but then set timeoutms to 0 by default. If the timeoutms is not provided it is set to -1. By setting timeoutms to 0 it is processed causing a bridging retry loop.
(closes issue #15216)
Reported by: oxymoron
Tested by: dvossel
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@198824 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A new xml element was created to manage the AMI actions documentation,
using AstXML.
To register a manager action using XML documentation it is now possible
using ast_manager_register_xml().
The CLI command 'manager show command' can be used to show the parsed
documentation.
Example manager xml documentation:
<manager name="ami action name" language="en_US">
<synopsis>
AMI action synopsis.
</synopsis>
<syntax>
<xi:include xpointer="xpointer(...)" /> <-- for ActionID
<parameter name="header1" required="true">
<para>Description</para>
</parameter>
...
</syntax>
<description>
<para>AMI action description</para>
</description>
<see-also>
...
</see-also>
</manager>
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@196308 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds 'const' tags to a number of Asterisk APIs where they are appropriate (where the API already demanded that the function argument not be modified, but the compiler was not informed of that fact). The list includes:
- CLI command handlers
- CLI command handler arguments
- AGI command handlers
- AGI command handler arguments
- Dialplan application handler arguments
- Speech engine API function arguments
In addition, various file-scope and function-scope constant arrays got 'const' and/or 'static' qualifiers where they were missing.
Review: https://reviewboard.asterisk.org/r/251/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@196072 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r195991 | dvossel | 2009-05-21 14:04:56 -0500 (Thu, 21 May 2009) | 14 lines
Sign problem calculating timestamp for iax frame leads to no audio on the receiving peer.
There are rare cases in which a frame's delivery timestamp is slightly less than the iax2_pvt's offset. This causes the pvt's timestamp to be a small negative number, but since the timestamp value is unsigned it looks like a huge positive number. This patch checks for this negative case and sets the ms to zero. A similar check is already done right below this one in the 'else' statement.
(closes issue #15032)
Reported by: guillecabeza
Patches:
chan_iax2.c.patch_timestamp uploaded by guillecabeza (license 380)
Tested by: guillecabeza
(closes issue #14216)
Reported by: Andrey Sofronov
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@195995 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r194557 | dvossel | 2009-05-14 17:59:43 -0500 (Thu, 14 May 2009) | 10 lines
IAX2 "Ghost" Channels
There is a bug tracker issue where people are reporting "Ghost" channels in their 'iax2 show channels' output. The confusion is caused by channels being listed as "(NONE)" with format "unknown". These are not channels of coarse. They are usually just pending registration or poke requests, but it is confusing output. To help make sense of this I have added two columns to 'iax2 show channels'. One shows the first message which started the transaction, and the second shows the last message sent by either side of the call. This helps diagnose why the entry exists and why it may not go away.
(closes issue #14207)
Reported by: clive18
Review: https://reviewboard.asterisk.org/r/246/
........
r194685 | dvossel | 2009-05-15 10:40:37 -0500 (Fri, 15 May 2009) | 6 lines
Update to previous IAX2 "Ghost" Channels patch.
Fixed some comments made on reviewboard for the previous patch.
(issue #14207)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@194833 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This scenario crept up if chan_iax2 was loaded with no configuration file present.
It would create a timer and tell it to go at an interval but the thread that normally
acknowledges it would not be created because no configuration file was present. The timer
will now be closed if no configuration file is present.
(closes issue #15014)
Reported by: madkins
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@192808 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r192213 | dvossel | 2009-05-04 17:37:31 -0500 (Mon, 04 May 2009) | 11 lines
global mohinterpret setting is ignored
mohinterpret and mohsuggest global variables were not copied over during build_users and build_peers.
(closes issue #14728)
Reported by: dimas
Patches:
v1-14728.patch uploaded by dimas (license 88)
Tested by: dimas, dvossel
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@192214 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There is a lot that could be said about this, but the patch is a big
improvement for performance, stability, code maintainability,
and ease of future code development.
The channel list is no longer an unsorted linked list. The main container
for channels is an astobj2 hash table. All of the code related to searching
for channels or iterating active channels has been rewritten. Let n be
the number of active channels. Iterating the channel list has gone from
O(n^2) to O(n). Searching for a channel by name went from O(n) to O(1).
Searching for a channel by extension is still O(n), but uses a new method
for doing so, which is more efficient.
The ast_channel object is now a reference counted object. The benefits
here are plentiful. Some benefits directly related to issues in the
previous code include:
1) When threads other than the channel thread owning a channel wanted
access to a channel, it had to hold the lock on it to ensure that it didn't
go away. This is no longer a requirement. Holding a reference is
sufficient.
2) There are places that now require less dealing with channel locks.
3) There are places where channel locks are held for much shorter periods
of time.
4) There are places where dealing with more than one channel at a time becomes
_MUCH_ easier. ChanSpy is a great example of this. Writing code in the
future that deals with multiple channels will be much easier.
Some additional information regarding channel locking and reference count
handling can be found in channel.h, where a new section has been added that
discusses some of the rules associated with it.
Mark Michelson also assisted with the development of this patch. He did the
conversion of ChanSpy and introduced a new API, ast_autochan, which makes it
much easier to deal with holding on to a channel pointer for an extended period
of time and having it get automatically updated if the channel gets masqueraded.
Mark was also a huge help in the code review process.
Thanks to David Vossel for his assistance with this branch, as well. David
did the conversion of the DAHDIScan application by making it become a wrapper
for ChanSpy internally.
The changes come from the svn/asterisk/team/russell/ast_channel_ao2 branch.
Review: http://reviewboard.digium.com/r/203/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@190423 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r189391 | dbailey | 2009-04-20 14:10:56 -0500 (Mon, 20 Apr 2009) | 4 lines
Clean up problem with manager implementation of mmap where it was not testing against MAP_FAILED response.
Got rid of shadowed variable used in processign the mmap results.
Change test of mmap results to compare against MAP_FAILED
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@189419 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The channel drivers which have been most heavily tested with these enhancements are
chan_sip and chan_misdn. Further work is being done to add Q.SIG support and will be
introduced in a later commit. chan_skinny has code added to it here, but according
to user pj, the support on chan_skinny is not working as of now. This will be fixed in
a later commit.
A special thanks goes out to bugtracker user gareth for getting the ball rolling and
providing the initial support for this work. Without his initial work on this, this would
not have been nearly as painless as it was.
This functionality has been tested by Digium's product quality department, as well as a
customer site running thousands of calls every day. In addition, many many many many bugtracker
users have tested this, too.
(closes issue #8824)
Reported by: gareth
Review: http://reviewboard.digium.com/r/201
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@186525 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This API call now waits for a special frame from the underlying channel driver to
indicate success or failure. This allows the return value to truly convey whether
the transfer worked or not. In the case of the Transfer() dialplan application this
means the value of the TRANSFERSTATUS dialplan variable is actually true.
(closes issue #12713)
Reported by: davidw
Tested by: file
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@186382 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In my tests that exercised full frame handling in chan_iax2, the version with
these changes took 30% to 40% of the CPU time compared to the same test of
Asterisk trunk before these modifications.
While doing some profiling for <http://reviewboard.digium.com/r/205/>,
one function that caught my eye was network_thread() in chan_iax2.c.
After the things that I was working on there, it was the next target
for analysis and optimization. I used oprofile's source annotation
functionality and found that the loop traversing the frame queue in
network_thread() was to blame for the excessive CPU cycle consumption.
The frame_queue in chan_iax2 previously held all frames that either were
pending transmission or had been transmitted and are still pending
acknowledgment.
In network_thread(), the previous code would go back through the main
for loop after reading a single incoming frame or after being signaled
because a frame had been queued up for initial transmission. In each
iteration of the loop, it traverses the entire frame queue looking for
frames that need to be transmitted. On a busy server, this could easily
be quite a few entries.
This patch is actually quite simple. The frame_queue has become only a list
of frames pending acknowledgment. Frames that need to be transmitted are
queued up to a dedicated transmit thread via the taskprocessor API.
As a result, the code in network_thread() becomes much simpler, as its only
job is to read incoming frames.
In addition to the previously described changes, this patch includes some
additional changes to the frame_queue. Instead of one big frame_queue, now
there is a list per call number to further reduce wasted list traversals.
The biggest impact of this change is in socket_process().
For additional details on testing and test results, see the review request.
Review: http://reviewboard.digium.com/r/212/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@185432 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The ability to load/unload timing interfaces is nice, but it means that when a timer is allocated, it may come from provider A, but later provider B becomes the 'preferred' provider. If this happens, all timer API calls on the timer that was provided by provider A will actually be handed to provider B, which will say WTF and return an error.
This patch changes the timer API to include a pointer to the provider of the timer handle so that future operations on the timer will be forwarded to the proper provider.
(closes issue #14697)
Reported by: moy
Review: http://reviewboard.digium.com/r/211/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@184762 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This code comes from svn/asterisk/team/russell/event_performance/.
Here is a summary of the changes that have been made, in order of both
invasiveness and performance impact, from smallest to largest.
1) Asterisk 1.6.1 introduces some additional logic to be able to handle
distributed device state. This functionality comes at a cost.
One relatively minor change in this patch is that the extra processing
required for distributed device state is now completely bypassed if
it's not needed.
2) One of the things that I noticed when profiling this code was that a
_lot_ of time was spent doing string comparisons. I changed the way
strings are represented in an event to include a hash value at the front.
So, before doing a string comparison, we do an integer comparison on the
hash.
3) Finally, the code that handles the event cache has been re-written.
I tried to do this in a such a way that it had minimal impact on the API.
I did have to change one API call, though - ast_event_queue_and_cache().
However, the way it works now is nicer, IMO. Each type of event that
can be cached (MWI, device state) has its own hash table and rules for
hashing and comparing objects. This by far made the biggest impact on
performance.
For additional details regarding this code and how it was tested, please see the
review request.
(closes issue #14738)
Reported by: russell
Review: http://reviewboard.digium.com/r/205/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@184339 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The default codec configuration for chan_iax2 is bandwidth=low. I noticed
slin16 being negotiated as the codec in some test calls, but that no longer
happens after this change.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@184037 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r182281 | dvossel | 2009-03-16 12:47:42 -0500 (Mon, 16 Mar 2009) | 7 lines
Randomize IAX2 encryption padding
The 16-32 byte random padding at the beginning of an encrypted IAX2 frame turns out to not be all that random at all. This patch calls ast_random to fill the padding buffer with random data. The padding is randomized at the beginning of every encrypted call and for every encrypted retransmit frame.
Review: http://reviewboard.digium.com/r/193/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@182282 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r181340 | dvossel | 2009-03-11 12:25:31 -0500 (Wed, 11 Mar 2009) | 11 lines
encrypted IAX2 during packet loss causes decryption to fail on retransmitted frames
If an iax channel is encrypted, and a retransmit frame is sent, that packet's iseqno is updated while it is encrypted. This causes the entire frame to be corrupted. When the corrupted frame is sent, the other side decrypts it and sends a VNAK back because the decrypted frame doesn't make any sense. When we get the VNAK, we look through the sent queue and send the same corrupted frame causing a loop. To fix this, encrypted frames requiring retransmission are decrypted, updated, then re-encrypted. Since key-rotation may change the key held by the pvt struct, the keys used for encryption/decryption are held within the iax_frame to guarantee they remain correct.
(closes issue #14607)
Reported by: stevenla
Tested by: dvossel
Review: http://reviewboard.digium.com/r/192/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@181371 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Iax2 prune realtime had issues. If "iax2 prune realtime all" was called, it would appear like the command was successful, but in reality nothing happened. This is because the reload that was supposed to take place checks the config files, sees no changes, and does nothing. If there had been a change in the the config file, the realtime users would have been marked for deletion and everything would have been fine. Now prune_users() and prune_peers() are called instead of reload_config() to prune all users/peers that are realtime. These functions remove all users/peers with the rtfriend and delme flags set. iax2_prune_realtime() also lacked the code to properly delete a single friend. For example. if iax2 prune realtime <friend> was called, only the peer instance would be removed. The user would still remain.
(closes issue #14479)
Reported by: mousepad99
Review: http://reviewboard.digium.com/r/176/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@178767 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Manager command "iaxpeers" now shows if a link is trunked and encrypted. Instead of encryption saying simply "yes" or "no", it now displays what type of encryption is enabled and if keyrotation is on or not.
(closes issue #14427)
Reported by: snuffy
Patches:
iax_show_trunks.diff uploaded by snuffy (license 35)
2009022200_iax2_show_trunkencryption.diff.txt uploaded by mvanbaak (license 7)
Tested by: mvanbaak, dvossel, snuffy
Review: http://reviewboard.digium.com/r/173/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@178300 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Key rotation was enabled by default by setting the global encryption method to IAX_ENCRYPT_KEYROTATE. the problem with this is that if encryption is not enabled, and the encryption method is set to anything except 0, the peer appears to have encryption enabled when issuing a "iax2 show peers". Rather than have the key rotation bit always set by default, it is now only set when an encryption method is enabled.
(closes issue #14523)
Reported by: mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@178030 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r176354 | dvossel | 2009-02-16 17:30:52 -0600 (Mon, 16 Feb 2009) | 8 lines
Fixes issue with AST_CONTROL_SRCUPDATE not being relayed correctly during bridging
This should have been committed with rev176247, but I missed it. srcupdate frames no longer break out of the native bridge, but are not being sent to the other call leg either. This fixs that.
issue #13749
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@176355 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r175597 | dvossel | 2009-02-13 14:11:55 -0600 (Fri, 13 Feb 2009) | 4 lines
Fixed iax2 key rotation backwards compatibility
Turns key rotation back on by default. Added bit into encryption IE to indicate whether or not key rotation is supported or not. If it is not supported then it is not enabled, which insures backwards compatibility. This eliminates the need for the keyrotate option in iax.conf, so it has been removed.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@176248 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Turns key rotation back on by default. Added bit into encryption IE to indicate whether or not key rotation is supported or not. If it is not supported then it is not enabled, which insures backwards compatibility. This eliminates the need for the keyrotate option in iax.conf, so it has been removed.
Review: http://reviewboard.digium.com/r/159/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@175597 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds forceencryption=yes as an iax.conf option. When force encryption is enabled, no unencrypted connections are allowed. This insures all connections are encrypted. This is a new feature, so CHANGES and iax.conf.sample are updated as well.
(closes issue #13285)
Reported by: sgofferj
Tested by: russell
Review: http://reviewboard.digium.com/r/150/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@175344 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Key rotation breaks compatibility between (trunk/1.6.1) and (1.2/1.4/1.6.0). As a follow up to this, I am investigating possible ways to allow key rotation to be on by default and not affect the other branches, but for now it must be turned off.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@175127 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is very similar to the DAHDI immediate=yes option. When the phone is picked up, instead of giving a dialtone it connects directly to the "s" extension. Changes where implemented in chan_iax2.c to directly connect to the "s" extension in the appropriate context when this option is enabled. Examples explaining its use are added to iax2.conf.sample. CHANGES has been updated as well.
(closes issue #14266)
Reported by: jcovert
Patches:
chan_iax2.c.patch-trunk uploaded by jcovert (license 551)
iax.conf.sample.patch uploaded by jcovert (license 551)
Tested by: jcovert, dvossel
Review: http://reviewboard.digium.com/r/143/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@174046 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit expands the Asterisk scheduler API to include a common implementation
of a scheduler context being processed by a dedicated thread. chan_iax2 has been
updated to use this new code. Also, as a result, this resolves some race
conditions related to the previous chan_iax2 scheduler handling.
Related to rev 171452 which resolved the same issues in 1.4.
Code from team/russell/sched_thread2
Review: http://reviewboard.digium.com/r/129/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@173858 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fixes issue with IAX2 transfers not taking place. As it was, a call that was being transfered would never be handed off correctly to the call ends because of how call numbers were stored in a hash table. The hash table, "iax_peercallno_pvt", storing all the current call numbers did not take into account the complications associated with transferring a call, so a separate hash table was required. This second hash table "iax_transfercallno_pvt" handles calls being transfered, once the call transfer is complete the call is removed from the transfer hash table and added to the peer hash table resuming normal operations. Addition functions were created to handle storing, removing, and comparing items in the iax_transfercallno_pvt table. The changes reverted in 116884 caused backwards compatibility issues involving iax2 transfer with 1.6.0, 1.4, and 1.2.
(closes issue #13468)
Reported by: nicox
Tested by: dvossel
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@173502 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r160003 | russell | 2008-12-01 11:27:30 -0600 (Mon, 01 Dec 2008) | 6 lines
Apply some logic used in iax2_indicate() to iax2_setoption(), as well, since they
both have the potential to send control frames in the middle of call setup. We
have to wait until we have received a message back from the remote end before
we try to send any more frames. Otherwise, the remote end will consider it
invalid, and we'll get stuck in an INVAL/VNAK storm.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@160004 65c4cc65-6c06-0410-ace0-fbb531ad65f3
------------------------------------------------------------------------
r159808 | kpfleming | 2008-11-29 10:58:29 -0600 (Sat, 29 Nov 2008) | 7 lines
update dev-mode compiler flags to match the ones used by default on Ubuntu Intrepid, so all developers will see the same warnings and errors
since this branch already had some printf format attributes, enable checking for them and tag functions that didn't have them
format attributes in a consistent way
------------------------------------------------------------------------
in addition:
move some format attributes from main/utils.c to the header files they belong in, and fix up references to the relevant functions based on new compiler warnings
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@159818 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r159316 | murf | 2008-11-25 15:41:10 -0700 (Tue, 25 Nov 2008) | 15 lines
(closes issue #12694)
Reported by: yraber
Patches:
12694.2nd.diff uploaded by murf (license 17)
Tested by: murf, laurav
Thanks to file (Joshua Colp) for his IAX fix.
the change to cdr.c allows no-answer to percolate
up into CDR's, and feels like the right place to
locate this fix; if BUSY is done here, no-answer
should be, too.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@159360 65c4cc65-6c06-0410-ace0-fbb531ad65f3
it would be best to maintain API compatibility. Instead, this commit introduces
ao2_callback_data() which is functionally identical to ao2_callback() except
that it allows you to pass arbitrary data to the callback.
Reviewed by Mark Michelson via ReviewBoard:
http://reviewboard.digium.com/r/64
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@158959 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r156229 | tilghman | 2008-11-12 12:39:21 -0600 (Wed, 12 Nov 2008) | 11 lines
Revert revision 132506, since it occasionally caused IAX2 HANGUP packets not
to be sent, and instead, schedule a task to destroy the iax2 pvt structure
10 seconds later. This allows the IAX2 HANGUP packet to be queued,
transmitted, and ACKed before the pvt is destroyed.
(closes issue #13645)
Reported by: dzajro
Patches:
20081111__bug13645__3.diff.txt uploaded by Corydon76 (license 14)
Tested by: vazir
Reviewed: http://reviewboard.digium.com/r/51/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@156243 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ao2_callback and ao2_find). Currently, passing OBJ_POINTER to either
of these mandates that the passed 'arg' is a hashable object, making
searching for an ao2 object based on outside criteria difficult.
Reviewed by Russell and Mark M. via ReviewBoard:
http://reviewboard.digium.com/r/36/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@155401 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r154365 | tilghman | 2008-11-04 14:49:33 -0600 (Tue, 04 Nov 2008) | 9 lines
On busy systems, it's possible for the values checked within a single line
of code to change, unless the structure is locked to ensure a consistent
state.
(closes issue #13717)
Reported by: kowalma
Patches:
20081102__bug13717.diff.txt uploaded by Corydon76 (license 14)
Tested by: kowalma
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@154366 65c4cc65-6c06-0410-ace0-fbb531ad65f3
for more details of this command.
(closes issue #13326)
Reported by: ib2
Patches:
bug13326_trunk_20080822.diff uploaded by snuffy (license 35)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@150311 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: nickpeirson
Patches:
pbx.c.patch uploaded by nickpeirson (license 579)
replace_bzero+bcopy.patch uploaded by nickpeirson (license 579)
Tested by: nickpeirson, murf
1. replaced all refs to bzero and bcopy to memset and memmove instead.
2. added a note to the CODING-GUIDELINES
3. add two macros to asterisk.h to prevent bzero, bcopy from creeping
back into the source
4. removed bzero from configure, configure.ac, autoconfig.h.in
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@147807 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r146799 | tilghman | 2008-10-06 15:52:04 -0500 (Mon, 06 Oct 2008) | 8 lines
Dialplan functions should not actually return 0, unless they have modified the
workspace. To signal an error (and no change to the workspace), -1 should be
returned instead.
(closes issue #13340)
Reported by: kryptolus
Patches:
20080827__bug13340__2.diff.txt uploaded by Corydon76 (license 14)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@146802 65c4cc65-6c06-0410-ace0-fbb531ad65f3
when a file is invalid from when a file is missing. This is most important when
we have two configuration files. Consider the following example:
Old system:
sip.conf users.conf Old result New result
======== ========== ========== ==========
Missing Missing SIP doesn't load SIP doesn't load
Missing OK SIP doesn't load SIP doesn't load
Missing Invalid SIP doesn't load SIP doesn't load
OK Missing SIP loads SIP loads
OK OK SIP loads SIP loads
OK Invalid SIP loads incompletely SIP doesn't load
Invalid Missing SIP doesn't load SIP doesn't load
Invalid OK SIP doesn't load SIP doesn't load
Invalid Invalid SIP doesn't load SIP doesn't load
So in the case when users.conf doesn't load because there's a typo that
disrupts the syntax, we may only partially load users, instead of failing with
an error, which may cause some calls not to get processed. Worse yet, the old
system would do this with no indication that anything was even wrong.
(closes issue #10690)
Reported by: dtyoo
Patches:
20080716__bug10690.diff.txt uploaded by Corydon76 (license 14)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142992 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Changes applied by this patch:
- Fix autocompletion in 'sip prune realtime', sip peers where never auto completed. Now we complete this command with:
'sip prune realtime peer' -> all | like | sip peers
Also I have modified the syntax in the usage, was wrong...
- Pass ast_cli_args->argv and ast_cli_args->argc while running autocompletion on CLI commands (CLI_GENERATE).
With this we avoid comparisons on ast_cli_args->line like this:
strcasestr(a->line, " description")
strcasestr(a->line, "descriptions ")
strcasestr(a->line, "realtime peer"), and so on..
Making the code more confusing (check the spaces in description!).
The only thing we must be sure is to first check a->pos or a->argc.
- Fix 'iax2 prune realtime' autocompletion, now we autocomplete this command with 'all' & 'iax2 peers', check a look that iax2 peers where all the peers, now only the ones in the cache..
(closes issue #13133)
Reported by: eliel
Patches:
clichanges.patch uploaded by eliel (license 64)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@141464 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r140488 | mmichelson | 2008-08-29 12:34:17 -0500 (Fri, 29 Aug 2008) | 22 lines
After working on the ao2_containers branch, I noticed
something a bit strange. In all cases where we provide
a callback function to ao2_container_alloc, the callback
function would only return 0 or CMP_MATCH. After inspecting
the ao2_callback() code carefully, I found that if you're
only looking for one specific item, then you should return
CMP_MATCH | CMP_STOP. Otherwise, astobj2 will continue
traversing the current bucket until the end searching for
more matches.
In cases like chan_iax2 where in 1.4, all the peers are
shoved into a single bucket, this makes for potentially
terrible performance since the entire bucket will be
traversed even if the peer is one of the first ones come
across in the bucket.
All the changes I have made were for cases where the
callback function defined was passed to ao2_container_alloc
so that calls to ao2_find could find a unique instance
of whatever object was being stored in the container.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@140489 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r140051 | russell | 2008-08-26 10:27:23 -0500 (Tue, 26 Aug 2008) | 15 lines
Fix a race condition with the IAX scheduler thread. A lock and condition are
used here to allow newly scheduled tasks to wake up the scheduler just in case
the new task needs to run sooner than the current wakeup time when the thread
is sleeping. However, there was a race condition such that a newly scheduled
task would not properly wake up the scheduler or affect the wake up period.
The order of execution would have been:
1) Scheduler thread determines wake up time of N ms.
2) Another thread schedules a task and signals the condition, with an
execution time of < N ms.
3) Scheduler thread locks and goes to sleep for N ms.
By moving the sleep time determination to inside the critical section, this
possibility is avoided.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@140053 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r135747 | tilghman | 2008-08-05 16:34:46 -0500 (Tue, 05 Aug 2008) | 9 lines
In a conversion to use ast_strlen_zero, the meaning of the flag IAX_HASCALLERID
was perverted. This change reverts IAX2 to the original meaning, which was,
that the callerid set on the client should be overridden on the server, even if
that means the resulting callerid is blank. In other words, if you set
"callerid=" in the IAX config, then the callerid should be overridden to blank,
even if set on the client. Note that there's a distinction, even on realtime,
between the field not existing (NULL in databases) and the field existing, but
set to blank (override callerid to blank).
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@135748 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This set of changes enhances IAX2 encryption support by adding key rotation
to provide enhanced security. The key used for encryption is rotated right
after the call gets set up, and then again every few minutes. This was
discussed at the last AstriDevCon. For interoperability with older versions
of Asterisk, there is an option that disables key rotation.
(closes issue #13018)
Reported by: bbryant
Patches:
07072008__iax2_key_rotation.diff uploaded by bbryant (license 36)
Tested by: russell, bbryant
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@135158 65c4cc65-6c06-0410-ace0-fbb531ad65f3
commands that conflicted with adding new features to the newer debug
commaands.
(closes issue #13103)
Reported by: mvanbaak
Patches:
2008071901__issue13103_iax2_set_debug_peer.diff uploaded by
mvanbaak (license 7)
Tested by: bbryant, mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@132470 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r130889 | tilghman | 2008-07-14 18:59:13 -0500 (Mon, 14 Jul 2008) | 8 lines
Override the callerid in all cases when the callerid is set in the user, not
just when a remote callerid is set. Also, if not set in the user, allow the
remote CallerID to pass through.
(closes issue #12875)
Reported by: dimas
Patches:
20080714__bug12875.diff.txt uploaded by Corydon76 (license 14)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@130890 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r130169 | tilghman | 2008-07-11 13:51:56 -0500 (Fri, 11 Jul 2008) | 7 lines
Ensure that a destination callno of 0 will not match for frames that do not
start a dialog (new, lagrq, and ping).
(closes issue #12963)
Reported by: russellb
Patches:
chan_iax2_dup_new_fix4.patch uploaded by jpgrayson (license 492)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@130170 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r128795 | russell | 2008-07-07 17:41:48 -0500 (Mon, 07 Jul 2008) | 8 lines
Fix handling of when a pvt disappears. Properly return the pvt locked
and don't hold the pvt lock while destroying the ast_channel.
(closes issue #13014)
Reported by: jpgrayson
Patches:
chan_iax2_ast_iax2_new2.patch uploaded by jpgrayson (license 492)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@128796 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r128639 | mmichelson | 2008-07-07 12:02:28 -0500 (Mon, 07 Jul 2008) | 10 lines
By using the iaxdynamicthreadcount to identify a thread, it was possible
for thread identifiers to be duplicated. By using a globally-unique monotonically-
increasing integer, this is now avoided.
(closes issue #13009)
Reported by: jpgrayson
Patches:
chan_iax2_dyn_threadnum.patch uploaded by jpgrayson (license 492)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@128640 65c4cc65-6c06-0410-ace0-fbb531ad65f3
They want (char *)NULL as sentinel.
An example is OpenBSD (confirmed on 4.3) that ships with gcc 3.3.4
This commit introduces a contstant SENTINEL which is declared as:
#define SENTINEL ((char *)NULL)
All places I could test compile on my openbsd system are converted.
Update CODING-GUIDELINES to tell about this constant.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@124127 65c4cc65-6c06-0410-ace0-fbb531ad65f3
function and begin the transition from SIPCHANINFO() to just using CHANNEL().
(closes issue #12856)
Reported by: mostyn
Patches:
iax_and_sip_channel_info.patch uploaded by mostyn (license 398)
(with some additional cleanup by me)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@122802 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Convert chan_iax2 to use the timing API
- Convert usage of timing in the core to use the timing API instead of
using DAHDI directly
- Make a change to the timing API to add the set_rate() function
- change the timing core to use a rwlock
- merge a timing implementation, res_timing_dahdi
Basic testing was successful using res_timing_dahdi
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@122523 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r120168 | russell | 2008-06-03 16:34:55 -0500 (Tue, 03 Jun 2008) | 4 lines
Fix another place where peer->callno could change at a very bad time, and also
fix a place where a peer was used after the reference was released.
(inspired by rev 120001)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@120169 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r119838 | russell | 2008-06-02 15:08:04 -0500 (Mon, 02 Jun 2008) | 7 lines
Revert a change made for issue #12479. This change caused a regression such that
a dial string such as (IAX2/foo) did not automatically fall back to dialing the 's'
extension anymore.
(closes issue #12770)
Reported by: dagmoller
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@119839 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r119238 | russell | 2008-05-30 07:55:36 -0500 (Fri, 30 May 2008) | 15 lines
Merged revisions 119237 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r119237 | russell | 2008-05-30 07:49:39 -0500 (Fri, 30 May 2008) | 7 lines
- Instead of only enforcing destination call number checking on an ACK, check
all full frames except for PING and LAGRQ, which may be sent by older versions
too quickly to contain the destination call number.
(As suggested by Tim Panton on the asterisk-dev list)
- Merge changes from team/russell/iax2-frame-race, which prevents PING and LAGRQ
from being sent before the destination call number is known.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@119239 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- make data member of the ast_frame struct a named union instead of a void
Recently the ast_queue_hangup function got a new parameter, the hangupcause
Feedback came in that this is no good and that instead a new function should be created.
This I did.
The hangupcause was stored in the seqno member of the ast_frame struct. This is not very
elegant, and since there's already a data member that one should be used.
Problem is, this member was a void *.
Now it's a named union so it can hold a pointer, an uint32 and there's a padding in case someone
wants to store another type in there in the future.
This commit is so massive, because all ast_frame.data uses have to be
altered to ast_frame.data.data
Thanks russellb and kpfleming for the feedback.
(closes issue #12674)
Reported by: mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@117802 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r116978 | russell | 2008-05-18 22:44:04 -0500 (Sun, 18 May 2008) | 4 lines
Avoid access of uninitialized memory. This caused a bunch of crashes for me
while doing load testing of development branch where I'm working on some
performance improvements.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@116979 65c4cc65-6c06-0410-ace0-fbb531ad65f3
marked "urgent" are considered to be higher priority than other messages
and so they will be played before any other messages in a user's mailbox.
There are two ways to leave an urgent message.
1. send the 'U' option to VoiceMail().
2. Set review=yes in voicemail.conf. This will give instructions for
a caller to mark a message as urgent after the message has been recorded.
I have tested that this works correctly with file and ODBC storage, and James
Rothenberger (who wrote initial support for this feature) has tested its use
with IMAP storage.
(closes issue #11817)
Reported by: jaroth
Based on branch http://svn.digium.com/svn/asterisk/team/jrothenberger/asterisk-urgent
Tested by: putnopvut, jaroth
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@115588 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r115565 | russell | 2008-05-08 14:15:25 -0500 (Thu, 08 May 2008) | 33 lines
Merged revisions 115564 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r115564 | russell | 2008-05-08 14:14:04 -0500 (Thu, 08 May 2008) | 25 lines
Fix a race condition that bbryant just found while doing some IAX2 testing.
He was running Asterisk trunk running IAX2 calls through a few Asterisk boxes,
however, the audio was extremely choppy. We looked at a packet trace and saw
a storm of INVAL and VNAK frames being sent from one box to another.
It turned out that what had happened was that one box tried to send a CONTROL
frame before the 3 way handshake had completed. So, that frame did not include
the destination call number, because it didn't have it yet. Part of our recent
work for security issues included an additional check to ensure that frames that
are supposed to include the destination call number have the correct one. This
caused the frame to be rejected with an INVAL. The frame would get retransmitted
for forever, rejected every time ...
This race condition exists in all versions that got the security changes,
in theory. However, it is really only likely that this would cause a problem in
Asterisk trunk. There was a control frame being sent (SRCUPDATE) at the _very_
beginning of the call, which does not exist in 1.2 or 1.4. However, I am fixing
all versions that could potentially be affected by the introduced race condition.
These changes are what bbryant and I came up with to fix the issue. Instead of
simply dropping control frames that get sent before the handshake is complete,
the code attempts to wait a little while, since in most cases, the handshake
will complete very quickly. If it doesn't complete after yielding for a little
while, then the frame gets dropped.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@115566 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114891 | russell | 2008-04-30 11:30:01 -0500 (Wed, 30 Apr 2008) | 28 lines
Merge changes from team/russell/iax2_find_callno and iax2_find_callno_1.4
These changes address a critical performance issue introduced in the latest
release. The fix for the latest security issue included a change that made
Asterisk randomly choose call numbers to make them more difficult to guess by
attackers. However, due to some inefficient (this is by far, an understatement)
code, when Asterisk chose high call numbers, chan_iax2 became unusable after
just a small number of calls. On a small embedded platform, it would not be
able to handle a single call. On my Intel Core 2 Duo @ 2.33 GHz, I couldn't
run more than about 16 IAX2 channels. Ouch.
These changes address some performance issues of the find_callno() function
that have bothered me for a very long time. On every incoming media frame,
it iterated through every possible call number trying to find a matching
active call. This involved a mutex lock and unlock for each call number
checked. So, if the random call number chosen was 20000, then every media
frame would cause 20000 locks and unlocks. Previously, this problem was
not as obvious since Asterisk always chose the lowest call number it could.
A second container for IAX2 pvt structs has been added. It is an astobj2
hash table. When we know the remote side's call number, the pvt goes into
the hash table with a hash value of the remote side's call number. Then,
lookups for incoming media frames are a very fast hash lookup instead of an
absolutely insane array traversal.
In a quick test, I was able to get more than 3600% more IAX2 channels
on my machine with these changes.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114892 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114880 | kpfleming | 2008-04-30 09:46:57 -0500 (Wed, 30 Apr 2008) | 2 lines
use the ARRAY_LEN macro for indexing through the iaxs/iaxsl arrays so that the size of the arrays can be adjusted in one place, and change the size of the arrays from 32768 calls to 2048 calls when LOW_MEMORY is defined
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114884 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114537 | russell | 2008-04-22 13:03:33 -0500 (Tue, 22 Apr 2008) | 9 lines
If the dial string passed to the call channel callback does not indicate an
extension, then consider the extension on the channel before falling back
to the default.
(closes issue #12479)
Reported by: darren1713
Patches:
exten_dial_fix_chan_iax2.c.patch uploaded by darren1713 (license 116)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114538 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: oej
Tested by: jpeeler
This patch implements multiple parking lots for parked calls. The default parkinglot is used by default, however setting the channel variable PARKINGLOT in the dialplan will allow use of any other configured parkinglot. See configs/features.conf.sample for more details on setting up another non-default parkinglot. Also, one can (currently) set the default parkinglot to use in the driver configuration file via the parkinglot option.
Patch initially written by oej, brought up to date and finalized by mvanbaak, and then stabilized and converted to astobj2 by me.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114487 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114083 | twilson | 2008-04-11 17:32:51 -0500 (Fri, 11 Apr 2008) | 7 lines
Several places in the code called find_callno() (which releases the lock on the pvt structure) and then immediately locked the call and did things with it. Unfortunately, the call can disappear between the find_callno and the lock, causing Bad Stuff(tm) to happen.
Added find_callno_locked() function to return the callno withtout unlocking for instances that it is needed.
(issue #12400)
Reported by: ztel
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114084 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r113784 | file | 2008-04-09 13:50:45 -0300 (Wed, 09 Apr 2008) | 4 lines
If we receive an AUTHREQ from the remote server and we are unable to reply (for example they have a secret configured, but we do not) then queue a hangup frame on the Asterisk channel. This will cause the channel to hangup and a HANGUP to be sent via IAX2 to the remote side which is the proper thing to do in this scenario.
(closes issue #12385)
Reported by: viraptor
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@113785 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r110628 | file | 2008-03-25 11:37:35 -0300 (Tue, 25 Mar 2008) | 4 lines
Add an option (transmit_silence) which transmits silence during both Record() and DTMF generation. The reason this is an option is that in order to transmit silence we have to setup a translation path. This may not be needed/wanted in all cases.
(closes issue #10058)
Reported by: tracinet
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@111017 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r110336 | russell | 2008-03-20 16:54:58 -0500 (Thu, 20 Mar 2008) | 14 lines
Merged revisions 110335 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r110335 | russell | 2008-03-20 16:53:27 -0500 (Thu, 20 Mar 2008) | 6 lines
Fix some very broken code that was introduced in 1.2.26 as a part of the security
fix. The dnsmgr is not appropriate here. The dnsmgr takes a pointer to an address
structure that a background thread continuously updates. However, in these cases,
a stack variable was passed. That means that the dnsmgr thread would be continuously
writing to bogus memory.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@110337 65c4cc65-6c06-0410-ace0-fbb531ad65f3
actual problems, per se. I also added format attributes to any printf wrapper functions I found that didn't have them. -Wsecurity and -Wmissing-format-attribute added to --enable-dev-mode.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@109447 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: rizzo
Tested by: murf
Proposal of the changes to be made, and then an announcement of how they were accomplished:
http://lists.digium.com/pipermail/asterisk-dev/2008-February/032065.html
and:
http://lists.digium.com/pipermail/asterisk-dev/2008-March/032124.html
Here is a recap, file by file, of what I have done:
pbx/pbx_config.c
pbx/pbx_ael.c
All funcs that were passed a ptr to the context list, now will ALSO be passed a hashtab ptr to the same set.
Why? because (for the time being), the dialplan is stored in both, to facilitate a quick, low-cost move to
hash-tables to speed up dialplan processing. If it was deemed necessary to pass the context LIST, well, it
is just as necessary to have the TABLE available. This is because the list/table in question might not be
the global one, but temporary ones we would use to stage the dialplan on, and then swap into the global
position when things are ready.
We now have one external function for apps to use, "ast_context_find_or_create()" instead of the pre-existing
"find" and "create", as all existing usages used both in tandem anyway.
pbx_config, and pbx_ael, will stage the reloaded dialplan into local lists and tables, and
then call merge_contexts_and_delete, which will merge (now) existing contexts and
priorities from other registrars into this local set by copying them. Then, merge_contexts_and_delete will
lock down the contexts, swap the lists and tables, and unlock (real quick), and then
destroy the old dialplan.
chan_sip.c
chan_iax.c
chan_skinny.c
All the channel drivers that would add regcontexts now use the ast_context_find_or_create now.
chan_sip also includes a small fix to get rid of warnings about removing priorities that never got entered.
apps/app_meetme.c
apps/app_dial.c
apps/app_queue.c
All the apps that added a context/exten/priority were also modified to use ast_context_find_or_create instead.
include/asterisk/pbx.h
ast_context_create() is removed. Find_or_create_ is the new method.
ast_context_find_or_create() interface gets the hashtab added.
ast_merge_contexts_and_delete() gets the local hashtab arg added.
ast_wrlock_contexts_version() is added so you can detect if someone else got a writelock between your readlocking and writelocking.
ast_hashtab_compare_contexts was made public for use in pbx_config/pbx_ael
ast_hashtab_hash_contexts was in like fashion make public.
include/asterisk/pval.h
ast_compile_ael2() interface changed to include the local hashtab table ptr.
main/features.c
For the sake of the parking context, we use ast_context_find_or_create().
main/pbx.c
I changed all the "tree" names to "table" instead. That's because the original
implementation was based on binary trees. (had a free library). Then I moved
to hashtabs. Now, the names move forward too.
refcount field added to contexts, so you can keep track of how many modules
wanted this context to exist.
Some log messages that are warnings were inflated from LOG_NOTICE to LOG_WARNING.
Added some calls to ast_verb(3,...) for debug messages
Lots of little mods to ast_context_remove_extension2, which is now excersized in ways
it was not previously; one definite bug fixed.
find_or_create was upgraded to handle both local lists/tables as well as the globals.
context_merge() was added to do the per-context merging of the old/present contexts/extens/prios into the new/proposed local list/tables
ast_merge_contexts_and_delete() was heavily modified.
ast_add_extension2() was also upgraded to handle changes.
the context_destroy() code was re-engineered to handle the new way of doing things,
by exten/prio instead of by context.
res/ael/pval.c
res/ael/ael.tab.c
res/ael/ael.tab.h
res/ael/ael.y
res/ael/ael_lex.c
res/ael/ael.flex
utils/ael_main.c
utils/extconf.c
utils/conf2ael.c
utils/Makefile
Had to change the interface to ast_compile_ael2(), to include the hashtab ptr.
This ended up involving several external apps. The main gotcha was I had to
include lock.h and hashtab.h in several places.
As a side note, I tested this stuff pretty thoroughly, I replicated the problems
originally reported by Luigi, and made triply sure that reloads worked, and everything
worked thru "stop gracefully". I found a and fixed a few bugs as I was merging into
trunk, that did not appear in my tests of bug6002.
How's this for verbose commit messages?
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@106757 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(closes issue #8925)
About a year ago, as Leif Madsen and Jim van Meggelen were going over the CLI
commands in Asterisk 1.4 for the next version of their book, they documented
a lot of inconsistencies. This set of changes addresses all of these issues
and has been reviewed by Leif.
While this does introduce even more changes to the CLI command structure, it
makes everything consistent, which is the most important thing.
Thanks to all that helped with this one!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@103171 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r101693 | russell | 2008-01-31 18:32:49 -0600 (Thu, 31 Jan 2008) | 8 lines
Add some more sanity checking on IAX2 dial strings for the case that no peer
or hostname was provided, which is the one part of the dial string that is
absolutely required. If it's not there, bail out.
(closes issue #11897)
Reported by sokhapkin
Patch by me
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@101694 65c4cc65-6c06-0410-ace0-fbb531ad65f3
that was just merged from 1.4, so this is a changeover to those APIs to use the
macro versions, so that we properly detect errors from ast_sched_del, instead
of simply ignoring the return values.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@100497 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r100465 | tilghman | 2008-01-27 15:59:53 -0600 (Sun, 27 Jan 2008) | 11 lines
When deleting a task from the scheduler, ignoring the return value could
possibly cause memory to be accessed after it is freed, which causes all
sorts of random memory corruption. Instead, if a deletion fails, wait a
bit and try again (noting that another thread could change our taskid
value).
(closes issue #11386)
Reported by: flujan
Patches:
20080124__bug11386.diff.txt uploaded by Corydon76 (license 14)
Tested by: Corydon76, flujan, stuarth`
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@100488 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r99004 | russell | 2008-01-17 16:37:22 -0600 (Thu, 17 Jan 2008) | 10 lines
Have IAX2 optimize the codec translation path just like chan_sip does it. If
the caller's codec is in our codec list, move it to the top to avoid transcoding.
(closes issue #10500)
Reported by: stevedavies
Patches:
iax-prefer-current-codec.patch uploaded by stevedavies (license 184)
iax-prefer-current-codec.1.4.patch uploaded by stevedavies (license 184)
Tested by: stevedavies, pj, sheldonh
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@99006 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r98943 | russell | 2008-01-15 17:26:52 -0600 (Tue, 15 Jan 2008) | 25 lines
Commit a fix for some memory access errors pointed out by the valgrind2.txt
output on issue #11698.
The issue here is that it is possible for an instance of a translator to get
destroyed while the frame allocated as a part of the translator is still being
processed. Specifically, this is possible anywhere between a call to ast_read()
and ast_frame_free(), which is _a lot_ of places in the code. The reason this
happens is that the channel might get masqueraded during this time. During a
masquerade, existing translation paths get destroyed.
So, this patch fixes the issue in an API and ABI compatible way. (This one is
for you, paravoid!)
It changes an int in ast_frame to be used as flag bits. The 1 bit is still used
to indicate that the frame contains timing information. Also, a second flag has
been added to indicate that the frame came from a translator. When a frame with
this flag gets released and has this flag, a function is called in translate.c to
let it know that this frame is doing being processed. At this point, the flag gets
cleared. Also, if the translator was requested to be destroyed while its internal
frame still had this flag set, its destruction has been deffered until it finds out
that the frame is no longer being processed.
Admittedly, this feels like a hack. But, it does fix the issue, and I was not able
to think of a better solution ...
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@98944 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1) Add the Dialplan class, for NewExten and VarSet events, which should cut
down on the volume of traffic in the Call class.
2) Permit some commands to be run from multiple classes, such as allowing
DBGet to be run from either the System or the Reporting class.
3) Heavily document each class in the sample config, as there were several
that made no sense to be in the write= line, and two that made no sense to be
in the read= line (since they controlled no permissions there).
(Closes issue #10386)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@97651 65c4cc65-6c06-0410-ace0-fbb531ad65f3
in the peers container after a reload. Somehow, this bug doesn't exist in 1.4 ...
(closes issue #11626)
(reported by pnlarsson, additional info from mvanbaak, fixed by me)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@94788 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r93182 | oej | 2007-12-17 08:15:13 +0100 (MÃ¥n, 17 Dec 2007) | 8 lines
Issue 11574: Add dependencies on res_monitor and res_features.
I wonder if Asterisk can run at all without res_features. My guess is that
there's propably a lot of more modules and the core that depends on it.
Reported by: caio1982
(closes issue #11574)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93335 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Refer to the proper documentation
- Implement separate signalling/media QoS/CoS in many channels using RTP
- Improve warnings and verbose messages
- Deprecate some old settings
Minor modifications by me, a big effort from IgorG.
Thanks!
Reported by: IgorG
Patches:
qoscleanup-89394-4-trunk.patch uploaded by IgorG (license 20)
Tested by: IgorG
(closes issue #11145)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93163 65c4cc65-6c06-0410-ace0-fbb531ad65f3
issue #11449 has demonstrated that it actually was a performance hit on his
machine. I think that it is possible that it could still be a benefit on systems
under higher load, especially SMP systems, but I don't have enough time or interest
to find out at the moment.
(closes issue #11449)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@92676 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r90348 | russell | 2007-11-30 13:26:04 -0600 (Fri, 30 Nov 2007) | 8 lines
Change the behavior of ao2_link(). Previously, in inherited a reference.
Now, it automatically increases the reference count to reflect the reference
that is now held by the container.
This was done to be more consistent with ao2_unlink(), which automatically
releases the reference held by the container. It also makes it so it is
no longer possible for a pointer to be invalid after ao2_link() returns.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@90351 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is an optimization for chan_iax2. This module is now heavily
multi-threaded. However, there is still a good number of globally shared
resources that prevent things from happen asynchronously. One of those things
was the global IAX frame queue. This queue was used to hold frames that have
been deferred for transmitting by another thread, and frames that may need to
get retransmitted.
I changed the frame queue to be per-call, since almost all of the frame queue
handling only cares about frames specific to a call number.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89887 65c4cc65-6c06-0410-ace0-fbb531ad65f3
build times - tested, there is no measureable difference before and
after this commit.
In this change:
use asterisk/compat.h to include a small set of system headers:
inttypes.h, unistd.h, stddef.h, stddint.h, sys/types.h, stdarg.h,
stdlib.h, alloca.h, stdio.h
Where available, the inclusion is conditional on HAVE_FOO_H as determined
by autoconf.
Normally, source files should not include any of the above system headers,
and instead use either "asterisk.h" or "asterisk/compat.h" which does it
better.
For the time being I have left alone second-level directories
(main/db1-ast, etc.).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89333 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This prevents modifying the strings in the stored variables,
and catched a few instances where this was actually done.
Given the differences between trunk and 1.4 (and the fact that this
is effectively an API change) it is better to fix 1.4 independently.
These are
chan_sip.c::sip_register()
chan_skinny.c:: near line 2847
config.c:: near line 1774
logger.c::make_components()
res_adsi.c:: near line 1049
I may have missed some instances for modules that do not build here.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89268 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- the *_CURRENT macros no longer need the list head pointer argument
- add AST_LIST_MOVE_CURRENT to encapsulate the remove/add operation when moving entries between lists
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89106 65c4cc65-6c06-0410-ace0-fbb531ad65f3
details and examples are in include/asterisk/stringfields.h.
Not applicable to older branches except for 1.4 which will
receive a fix for the routines that free memory pools.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@88454 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r87686 | russell | 2007-10-30 16:19:09 -0500 (Tue, 30 Oct 2007) | 11 lines
Merge the changes from team/russell/iax2_poke_fix and iax2-poke-fix-trunk
There was a race condition related to the handling of POKEing peers. Essentially,
a reference to a peer is held by the scheduler when there are pending callbacks,
but the reference count didn't reflect it. So, it was possible for a peer to hit
a reference count of zero and have its destructor begin to be called at the same
time that the scheduler thread ran a POKE related callback. If that happened,
a crash would likely occur.
(closes issue #11082, closes issue #11094)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@87687 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also fixes a few cli messages and some minor formatting.
(closes issue #11001)
Reported by: seanbright
Patches:
newcli.1.patch uploaded by seanbright (license 71)
newcli.2.patch uploaded by seanbright (license 71)
newcli.4.patch uploaded by seanbright (license 71)
newcli.5.patch uploaded by seanbright (license 71)
newcli.6.patch uploaded by seanbright (license 71)
newcli.7.patch uploaded by seanbright (license 71)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@86534 65c4cc65-6c06-0410-ace0-fbb531ad65f3
a patch for it. It replaces a bunch of simple calls to snprintf with ast_copy_string
(closes issue #10843)
Reported by: Corydon76
Patches:
2007092900_10843.diff uploaded by mvanbaak (license 7)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@84173 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r83432 | russell | 2007-09-21 09:37:20 -0500 (Fri, 21 Sep 2007) | 4 lines
gcc 4.2 has a new set of warnings dealing with cosnt pointers. This set of
changes gets all of Asterisk (minus chan_alsa for now) to compile with gcc 4.2.
(closes issue #10774, patch from qwell)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@83433 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r83175 | russell | 2007-09-19 14:13:29 -0500 (Wed, 19 Sep 2007) | 8 lines
When handling a reload of chan_iax2, don't use an ao2_callback() to POKE all
peers. Instead, use an iterator. By using an iterator, the peers container
is not locked while the POKE is being done. It can cause a deadlock if the
peers container is locked because poking a peer will try to lock pvt structs,
while there is a lot of other code that will hold a pvt lock when trying to
go lock the peers container.
(reported to me directly by Loic Didelot. Thank you for the debug info!)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@83176 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Mark Michelson
Eliel C. Sardanons
Tzafrir Cohen
Russell Bryant
David Vossel
Terry Wilson
Tilghman Lesher
Leif Madsen
Richard Mudgett
Kevin P. Fleming
Jeff Peeler
Joshua Colp
Doug Bailey
Steve Murphy
Sean Bright
Michiel van Baak
Brett Bryant
Olle Johansson
Jason Parker
Luigi Rizzo