https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r152535 | murf | 2008-10-28 22:36:32 -0600 (Tue, 28 Oct 2008) | 46 lines
The magic trick to avoid this crash is not to
try to find the channel by name in the list,
which is slow and resource consuming, but rather
to pay attention to the result codes from the
ast_bridge_call, to which I added the
AST_PBX_NO_HANGUP_PEER_PARKED value, which
now are returned when a channel is parked.
Why? because CDR's aren't generated via parking,
so nothing is needed, but if a transfer occurred,
there are critical things I need.
If you get AST_PBX_KEEPALIVE,
then don't touch the channel pointer.
If you get AST_PBX_NO_HANGUP_PEER, or
AST_PBX_NO_HANGUP_PEER_PARKED, then don't
touch the peer pointer.
Updated the several places where the results
from a bridge were not being properly obeyed,
and fixed some code I had introduced so that
the results of the bridge were not overridden
(in trunk).
All the places that previously tested for
AST_PBX_NO_HANGUP_PEER now have to check for
both AST_PBX_NO_HANGUP_PEER and AST_PBX_NO_HANGUP_PEER_PARKED.
I tested this against the 4 common parking
scenarios:
1. A calls B; B answers; A parks B; B hangs up while A is getting the parking
slot announcement, immediately after being put on hold.
2. A calls B; B answers; A parks B; B hangs up after A has been hung up, but
before the park times out.
3. A calls B; B answers; B parks A; A hangs up while B is getting the parking slot announcement, immediately after being put on hold.
4. A calls B; B answers; B parks A; A hangs up after B has been hung up, but before the park times out.
No crash.
I also ran the scenarios above against valgrind, and accesses looked good.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@152536 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r151905 | russell | 2008-10-25 05:59:02 -0500 (Sat, 25 Oct 2008) | 8 lines
Move AMI initialization to occur after loading modules. This prevents a
deadlock when someone tries to initiate a module reload from the AMI just
as Asterisk is starting.
(closes issue #13778)
Reported by: hotsblanc
Fix suggested by hotsblanc
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@151906 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1) rename 'struct server_args' to 'struct ast_tcptls_session_args', to follow coding guidelines
2) make ast_make_file_from_fd() static and rename it to something that indicates what it really is for (again coding guidelines)
3) rename address variables inside 'struct ast_tcptls_session_args' to be more descriptive (dare i say it... coding guidelines)
4) change ast_tcptls_client_start() to use the new 'remote_address' field of the session args for the destination of the connection, and use the 'local_address' field to bind() the socket to the proper source address, if one is supplied
5) in chan_sip, ensure that we pass in the PP address we are bound to when creating outbound (client) connections, so that our connections will appear from the correct address
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@151101 65c4cc65-6c06-0410-ace0-fbb531ad65f3
We'll create a bogus channel for the function call and destroy it when we're done. If we have trouble allocating the bogus channel then we're not going to try executing the function call at all and run the risk of crashing.
(closes issue #13715)
reported by: makoto
patch by: bweschke
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@150817 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prodded on IRC by Russell and fixed by eliel
(closes issue #13730)
Reported by: eliel
Patches:
main_cli.patch uploaded by eliel (license 64)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@150664 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r150304 | mmichelson | 2008-10-16 18:40:54 -0500 (Thu, 16 Oct 2008) | 6 lines
Reverting changes from commits 150298 and 150301 since
I was mistakenly under the assumption that dialplan functions
*always* required that a channel be present. I need to go
home earlier, I think :)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@150305 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r150298 | mmichelson | 2008-10-16 18:34:37 -0500 (Thu, 16 Oct 2008) | 10 lines
Don't try to call a dialplan function's read callback from
the manager's GetVar handler if an invalid channel has
been specified. Several dialplan functions, including
CHANNEL and SIP_HEADER, do not check for NULL-ness of
the channel being passed in.
(closes issue #13715)
Reported by: makoto
........
r150301 | mmichelson | 2008-10-16 18:35:07 -0500 (Thu, 16 Oct 2008) | 3 lines
And don't forget to return on the error condition
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@150302 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r149204 | mmichelson | 2008-10-14 18:00:01 -0500 (Tue, 14 Oct 2008) | 12 lines
Add a tolerance period for sync-triggered audiohooks
so that if packetization of audio is close (but not equal)
we don't end up flushing the audiohooks over small
inconsistencies in synchronization.
Related to issue #13005, and solves the issue
for most people who were experiencing the problem.
However, a small number of people are still experiencing
the problem on long calls, so I am not closing
the issue yet
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@149205 65c4cc65-6c06-0410-ace0-fbb531ad65f3
'update2', which permits updates which match across multiple columns, instead
of requiring all tables to have a single unique identifier. All of the other
API calls with the exception of 'update' already had the ability to match on
multiple fields, so it was a missing and very desireable feature that an API
call implementing an update should have this, too.
This does not change any outward performance of Asterisk, but it should make
life easier for application developers who use the RealTime framework.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@148570 65c4cc65-6c06-0410-ace0-fbb531ad65f3
the trie info when they do 'dialplan show ...'
(even with debug set to non-zero); so I set up a
'dialplan debug [context]' cli command instead,
to explicitly show just the trie info. I even
added an extension_exists() call to make sure the
trie info is built. I moved the explanatory header
to above the extension loop to ensure it only prints
once. And it will do this now, whether debug is set
or not.
I removed the trie printing from the 'dialplan show'
command entirely.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@148519 65c4cc65-6c06-0410-ace0-fbb531ad65f3
app_voicemail. Instead, include it where it is needed. This turned out to be a
relatively minor issue because other headers include logger.h as well.
Need to test -addons before merging this back to 1.6.0.
(closes issue #13605)
Reported by: tomo1657
Patches:
13605_seanbright.diff uploaded by seanbright (license 71)
Tested by: mmichelson
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@148200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
been removed. Furthermore, now we actually use the Context argument
passed to set the transfer context and don't error out if no
context is specified.
This addresses the actual problems outlined in issue 12158. Regarding
the other points brought up, regarding the inability to not transfer
to extensions which cannot be represented by DTMF, it is not enough of
a constraint that it is worth attempting to rework the feature.
(closes issue #12158)
Reported by: davidw
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@148160 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r146026 | murf | 2008-10-03 12:12:54 -0500 (Fri, 03 Oct 2008) | 18 lines
(closes issue #13579)
Reported by: dwagner
(closes issue #13584)
Reported by: dwagner
Tested by: murf, putnopvut
The thought occurred to me that the res= from the extension spawn
was ending up being returned from the bridge.
"Thou shalt not poison the return value". Made the change
and it appears to allow blind xfers to work as normal.
If I'm wrong, reopen the bugs. But it looks good to me!
Many thanks to putnopvut for helping me reproduce this!
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@148112 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: krisk84
Tested by: krisk84
This change prevents a call that is placed in the parkinglot to be picked up before the PBX is finished. If another extension dials the parking extension before the PBX thread has completed at minimum warnings will occur about the PBX not properly being terminated. At worst, a crash could occur.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@147952 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: nickpeirson
Patches:
pbx.c.patch uploaded by nickpeirson (license 579)
replace_bzero+bcopy.patch uploaded by nickpeirson (license 579)
Tested by: nickpeirson, murf
1. replaced all refs to bzero and bcopy to memset and memmove instead.
2. added a note to the CODING-GUIDELINES
3. add two macros to asterisk.h to prevent bzero, bcopy from creeping
back into the source
4. removed bzero from configure, configure.ac, autoconfig.h.in
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@147807 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1) r143204:
The main change here was to masquerade the channel if the channel that was to be parked was running a PBX on it. The PBX thread can then maintain full control of the channel (the zombie) as it expects to while allowing the parking thread full control of the real (parked) channel.
2) r143270:
Changed park_call_full to hold the parkinglot lock a little longer, which protects the parkeduser struct from being freed out from underneath. Made sure that the parking extension is added to the parking context while holding the lock thereby ensuring that there are no spurious warnings from removal attempts when a hangup occurs while the parking lot is being announced.
3) r143475: (the one liner)
compare peer and chan instead of looking at the parked user (pu), which could have possibly already have been freed by the parking thread
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@146883 65c4cc65-6c06-0410-ace0-fbb531ad65f3
is no garbage attempted to be used. Also, do not set args to unknown value again if there are
no options passed in.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@146875 65c4cc65-6c06-0410-ace0-fbb531ad65f3
read from the .asterisk_history file (and subsequently being duplicated
when written). We weren't checking the result of fgets() which meant
that we read the same line twice before feof() actually returned non-
zero.
Also, stop writing out an extra blank line between each item in the
history file, fix a minor off-by-one error, and use symbolic constants
rather than a hardcoded integer.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@146359 65c4cc65-6c06-0410-ace0-fbb531ad65f3
the first item in the CLI entry list. This was preventing '!' from
showing up in either 'help' or in tab completion.
(closes issue #13578)
Reported by: mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@146198 65c4cc65-6c06-0410-ace0-fbb531ad65f3
problem within strptime(3), which we are correcting here with ast_strptime().
(closes issue #11040)
Reported by: DEA
Patches:
20080910__bug11040.diff.txt uploaded by Corydon76 (license 14)
Tested by: DEA
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@145649 65c4cc65-6c06-0410-ace0-fbb531ad65f3
to fix blind transfers with my last commit here, I also
caused an unwanted side-effect. That is, only the first
priority of the 'h' extension would be executed when
a blind transfer occurred instead of all priorities.
Essentially, my last commit corrected the return value
of ast_bridge_call. However, the implementation still
was not 100% correct. Now it is.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@145606 65c4cc65-6c06-0410-ace0-fbb531ad65f3
within ast_bridge_call was reversed.
This problem was observed when a blind transfer placed from
the callee channel of a test call failed.
While the problem I am solving here is exactly the same
as what was reported in issue #13584, the difference is
that this fix I am applying is trunk-only. Issue #13584
was reported against the 1.4 branch, and my tests
of 1.4's blind transfers appear to work fine.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@145553 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This work is done by lmadsen, junky and mvanbaak
during AstriDevCon.
This is the second audit the CLI got, and
this time lmadsen made sure he had _ALL_ modules
loaded that have CLI commands in them.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@145121 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r144924 | kpfleming | 2008-09-27 10:00:48 -0500 (Sat, 27 Sep 2008) | 6 lines
improve header inclusion process in a few small ways:
- it is no longer necessary to forcibly include asterisk/autoconfig.h; every module already includes asterisk.h as its first header (even before system headers), which serves the same purpose
- astmm.h is now included by asterisk.h when needed, instead of being forced by the Makefile; this means external modules will build properly against installed headers with MALLOC_DEBUG enabled
- simplify the usage of some of these headers in the AEL-related stuff in the utils directory
........
r144925 | kpfleming | 2008-09-27 10:13:30 -0500 (Sat, 27 Sep 2008) | 2 lines
fix some minor issues with rev 144924
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@144949 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r144677 | murf | 2008-09-26 11:47:13 -0600 (Fri, 26 Sep 2008) | 12 lines
(closes issue #13563)
Reported by: mnicholson
Patches:
found1.diff uploaded by mnicholson (license 96)
This patch was mainly meant to apply to trunk and 1.6.x,
but I'm applying it to 1.4 also, which should be a perfectly
harmless fix to the vast majority of users who are not using
external switches, but the few who might be affected
will not have to go to the pain of filing a bug report.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@144678 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: nickpeirson
The user attached a patch, but the license is not yet
recorded. I took the liberty of finding and replacing
ALL index() calls with strchr() calls, and that
involves more than just main/pbx.c;
chan_oss, app_playback, func_cut also had calls
to index(), and I changed them out. 1.4 had no
references to index() at all.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@144569 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r144066 | murf | 2008-09-23 10:41:49 -0600 (Tue, 23 Sep 2008) | 29 lines
(closes issue #13489)
Reported by: DougUDI
Tested by: murf
(closes issue #13490)
Reported by: seanbright
Tested by: murf
(closes issue #13467)
Reported by: edantie
Tested by: murf, edantie, DougUDI
This crash happens because we are unsafely handling old pointers.
The channel whose cdr is being handled, has been hung up and
destroyed already. I reorganized the code a bit, and tried not
to lose the fork-cdr-chain concepts of the previous code.
I now verify that the 'previous' channel (the channel we
had when the bridge was started), still exists, by looking it up
by name in the channel list. I also do not try to reset the
CDR's of channels involved in bridges.
Testing shows it solves the crash problem, and should not
negatively impact previous fixes involving CDR's generated
during/after blind transfers. (The reason we need to reset
the CDR's on the "beginning" channels in the first place).
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@144067 65c4cc65-6c06-0410-ace0-fbb531ad65f3
is set, don't bother searching for a region to free, just
immediately exit.
This has the dual benefit of suppressing a warning message
about freeing memory at (nil) and of optimizing the free()
replacement by not having to do any futile searching for
the proper region to free.
(closes issue #13498)
Reported by: pj
Patches:
13498.patch uploaded by putnopvut (license 60)
Tested by: pj
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@143400 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r143337 | mmichelson | 2008-09-17 13:24:15 -0500 (Wed, 17 Sep 2008) | 6 lines
Allow for "G.729" if offered in an SDP even though
it is not RFC 3551 compliant. Some Cisco switches
will send this in an SDP, and it doesn't hurt to
be able to accept this.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@143340 65c4cc65-6c06-0410-ace0-fbb531ad65f3
when a file is invalid from when a file is missing. This is most important when
we have two configuration files. Consider the following example:
Old system:
sip.conf users.conf Old result New result
======== ========== ========== ==========
Missing Missing SIP doesn't load SIP doesn't load
Missing OK SIP doesn't load SIP doesn't load
Missing Invalid SIP doesn't load SIP doesn't load
OK Missing SIP loads SIP loads
OK OK SIP loads SIP loads
OK Invalid SIP loads incompletely SIP doesn't load
Invalid Missing SIP doesn't load SIP doesn't load
Invalid OK SIP doesn't load SIP doesn't load
Invalid Invalid SIP doesn't load SIP doesn't load
So in the case when users.conf doesn't load because there's a typo that
disrupts the syntax, we may only partially load users, instead of failing with
an error, which may cause some calls not to get processed. Worse yet, the old
system would do this with no indication that anything was even wrong.
(closes issue #10690)
Reported by: dtyoo
Patches:
20080716__bug10690.diff.txt uploaded by Corydon76 (license 14)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142992 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r142675 | murf | 2008-09-11 22:29:34 -0600 (Thu, 11 Sep 2008) | 29 lines
Tested by: sergee, murf, chris-mac, andrew, KNK
This is a "second attempt" to restore the previous "endbeforeh" behavior
in 1.4 and up. In order to capture information concerning all the
legs of transfers in all their infinite combinations, I was forced
to this particular solution by a chain of logical necessities, the
first being that I was not allowed to rewrite the CDR mechanism from
the ground up!
This change basically leaves the original machinery alone, which allows
IVR and local channel type situations to generate CDR's as normal, but
a channel flag can be set to suppress the normal running of the h exten.
That flag would be set by the code that runs the h exten from the
ast_bridge_call routine, to prevent the h exten from being run twice.
Also, a flag in the ast_bridge_config struct passed into ast_bridge_call
can be used to suppress the running of the h exten in that routine. This
would happen, for instance, if you use the 'g' option in the Dial app.
Running this routine 'early' allows not only the CDR() func to be used
in the h extension for reading CDR variables, but also allows them to
be modified before the CDR is posted to the backends.
While I dearly hope that this patch overcomes all problems, and
introduces no new problems, reality suggests that surely someone
will have problems. In this case, please re-open 13251 (or 13289),
and we'll see if we can't fix any remaining issues.
** trunk note: some code to suppress the h exten being run
from app_queue was added; for the 'continue' option available
only in trunk/1.6.x.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142676 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r142575 | murf | 2008-09-11 16:55:49 -0600 (Thu, 11 Sep 2008) | 20 lines
(closes issue #13364)
Reported by: mdu113
Well, fundamentally, the problems revealed in 13364 are
because of the ForkCDR call that is done before the dial.
When the bridge is in place, it's dealing with the first
(and wrong) cdr in the list.
So, I wrote a little func to zip down to the first non-locked
cdr in the chain, and thru-out the ast_bridge_call, these
results are used instead of raw chan->cdr and peer->cdr pointers.
This shouldn't affect anyone who isn't forking cdrs before a
dial, and should correct the cdr's of those that do.
So, this change ends up correcting the dstchannel
and userfield; the disposition was fixed by a previous
patch, it was OK coming into this problem.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142576 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r142474 | murf | 2008-09-10 15:58:17 -0600 (Wed, 10 Sep 2008) | 30 lines
(closes issue #12318)
Reported by: krtorio
I made a small change to the code that handles local channel situations.
In that code, I copy the answer time from the peer cdr, to the bridge_cdr,
but I wasn't also copying the disposition from the peer cdr.
So, Now I copy the disposition, and I've tested against
these cases:
1. phone 1 never answers the phone; no cdr is generated at all.
this should show up as a manager command failure or something.
2. phone 2 never answers. CDR is generated, says NO ANSWER
3. phone 2 is busy. CDR is generated, says BUSY
4. phone 2 answers: CDR is generated, times are correct; disposition
is ANSWERED, which is correct. The start time is the time that
the manager dialed the first phone. The answer time is the time
the second phone picks up.
I purposely left the cid and src fields blank; since this call really
originates from the manager, there is no 'easy' data to put in these
fields. If you feel strongly that these fields should be filled in,
re-open this bug and I'll dig further.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142475 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r142354 | russell | 2008-09-10 11:39:53 -0500 (Wed, 10 Sep 2008) | 7 lines
It is a normal situation that a task gets put in the scheduler that should run
as soon as possible. Accept "0" as an acceptable time to run, and also treat
negative as "run now", and don't print a debug message about it.
(inspired by a message asking about the "request to schedule in the past"
debug message on the -dev list)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142355 65c4cc65-6c06-0410-ace0-fbb531ad65f3
or when calling ast_waitfor(). These are inappropriate times to hold the channel
lock. This is what has caused "could not get the channel lock" messages from
chan_sip and has likely caused a negative impact on performance results of SIP
in Asterisk 1.6. Thanks to file for pointing out this section of code.
(closes issue #13287)
(closes issue #13115)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@141949 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r141806 | russell | 2008-09-08 16:02:36 -0500 (Mon, 08 Sep 2008) | 7 lines
When doing an async goto, detect if the channel is already in the middle of a
masquerade. This can happen when chan_local is trying to optimize itself out.
If this happens, fail the async goto instead of bursting into flames.
(closes issue #13435)
Reported by: geoff2010
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@141807 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Changes applied by this patch:
- Fix autocompletion in 'sip prune realtime', sip peers where never auto completed. Now we complete this command with:
'sip prune realtime peer' -> all | like | sip peers
Also I have modified the syntax in the usage, was wrong...
- Pass ast_cli_args->argv and ast_cli_args->argc while running autocompletion on CLI commands (CLI_GENERATE).
With this we avoid comparisons on ast_cli_args->line like this:
strcasestr(a->line, " description")
strcasestr(a->line, "descriptions ")
strcasestr(a->line, "realtime peer"), and so on..
Making the code more confusing (check the spaces in description!).
The only thing we must be sure is to first check a->pos or a->argc.
- Fix 'iax2 prune realtime' autocompletion, now we autocomplete this command with 'all' & 'iax2 peers', check a look that iax2 peers where all the peers, now only the ones in the cache..
(closes issue #13133)
Reported by: eliel
Patches:
clichanges.patch uploaded by eliel (license 64)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@141464 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r141028 | jpeeler | 2008-09-04 12:00:29 -0500 (Thu, 04 Sep 2008) | 7 lines
(closes issue #11979)
Fixes multiple parking problems:
Crash when executing a park on an extension dialed by AGI due to not returning the proper return code.
Crash when using a builtin feature that was a subset of a enabled dynamic feature.
Crash due to always hanging up the peer despite the fact that the peer was supposed to be parked.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@141039 65c4cc65-6c06-0410-ace0-fbb531ad65f3
of changes to the Set and MSet apps, so people aren't
so shocked and surprised when they upgrade from
1.4 to 1.6.
Also, for the sake of those upgrading from 1.4 to
1.6 with AEL, I provide automatic support for the
"old" way of using Set(), that still does the
exact same old thing with quotes and backslashes
and so on as 1.4 did, by having AEL compile in the
use of MSet() instead of Set(), everywhere it inserts
this code.
But, if the app_set var is set to 1.6 or higher,
it uses the "new", non-evaluative Set().
This only usually happens if the user manually
inserts this into the asterisk.conf file, or runs
the "make samples" command.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@140824 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r140747 | murf | 2008-09-02 17:36:56 -0600 (Tue, 02 Sep 2008) | 1 line
I am turning the warnings generated in ast_cdr_free and post_cdr into verbose level 2 messages. Really, they matter little to end users. You either get the CDR's you wanted, or you don't, and it is a bug.
For trunk, I am going one step further. These messages were pretty worthless even for debug, so I'm completely removing them.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@140749 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r140690 | murf | 2008-09-02 16:40:13 -0600 (Tue, 02 Sep 2008) | 1 line
After reconsidering, with respect to 13409, ast_cdr_detach should be OK, better in fact, than ast_cdr_free, which generates lots of useless warnings that will undoubtably generate complaints.
Hmmm. It doesn't hush the useless warnings, but it does allow control of posting via the detach and post routines, for those possible situations,
where you'd want to post single-channel cdrs.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@140692 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r140670 | murf | 2008-09-02 16:15:57 -0600 (Tue, 02 Sep 2008) | 14 lines
(closes issue #13409)
Reported by: tomaso
Patches:
asterisk-1.6.0-rc2-cdrmemleak.patch uploaded by tomaso (license 564)
I basically spent the day, verifying that this patch
solves the problem, and doesn't hurt in non-problem
cases. Why valgrind did not plainly reveal this leak
absolutely mystifies and stuns me.
Many, many thanks to tomaso for finding and providing the fix.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@140691 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r140488 | mmichelson | 2008-08-29 12:34:17 -0500 (Fri, 29 Aug 2008) | 22 lines
After working on the ao2_containers branch, I noticed
something a bit strange. In all cases where we provide
a callback function to ao2_container_alloc, the callback
function would only return 0 or CMP_MATCH. After inspecting
the ao2_callback() code carefully, I found that if you're
only looking for one specific item, then you should return
CMP_MATCH | CMP_STOP. Otherwise, astobj2 will continue
traversing the current bucket until the end searching for
more matches.
In cases like chan_iax2 where in 1.4, all the peers are
shoved into a single bucket, this makes for potentially
terrible performance since the entire bucket will be
traversed even if the peer is one of the first ones come
across in the bucket.
All the changes I have made were for cases where the
callback function defined was passed to ao2_container_alloc
so that calls to ao2_find could find a unique instance
of whatever object was being stored in the container.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@140489 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: erousseau
This was a reasonable enhancement request, which was
easy to implement. Since it's an enhancement, it
could only be applied to trunk.
Basically, for accounting where "initiated" seconds
are billed for, if the microseconds field on the end
time is greater than the microseconds field for the
answer time, add one second to the billsec field.
The implementation was requested by erousseau, and
I've implemented it as requested. I've updated the
CHANGES, the cdr.conf.sample, and the .h files
accordingly, to accept and set a flag for the
corresponding new option. cdr.c adds in the extra
second based on the usec fields if the option is
set. Tested, seems to be working fine.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@140057 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r139764 | murf | 2008-08-25 09:33:14 -0600 (Mon, 25 Aug 2008) | 9 lines
This patch reverts the changes made via 139347, and 139635, as users
are seeing adverse difference.
I will un-close 13251.
Back to the drawing board/ concept/ beginning/ whatever!
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@139770 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r139635 | murf | 2008-08-22 16:24:02 -0600 (Fri, 22 Aug 2008) | 6 lines
I found some problems with the code I committed earlier, when
I merged them into trunk, so I'm coming back to clean up.
And, in the process, I found an error in the code I added
to trunk and 1.6.x, that I'll fix using this patch also.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@139662 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r139347 | murf | 2008-08-21 17:03:50 -0600 (Thu, 21 Aug 2008) | 47 lines
(closes issue #13251)
Reported by: sergee
Tested by: murf
THis is a bold move for a static release fix, but I wouldn't have
made it if I didn't feel confident (at least a *bit* confident)
that it wouldn't mess everyone up.
The reasoning goes something like this:
1. We simply cannot do anything with CDR's at the current point
(in pbx.c, after the __ast_pbx_run loop). It's way too late to
have any affect on the CDRs. The CDR is already posted and gone,
and the remnants have been cleared.
2. I was very much afraid that moving the running of the 'h'
extension down into the bridge code (where it would be now
practical to do it), would result in a lot more calls to the
'h' exten, so I implemented it as another exten under another
name, but found, to my pleasant surprise, that there was a
1:1 correspondence to the running of the 'h' exten in the
pbx_run loop, and the new spot at the end of the bridge.
So, I ifdef'd out the current 'h' loop, and moved it into
the bridge code. The only difference I can see is the stuff
about the AST_PBX_KEEPALIVE, and hopefully, if this
is still an important decision point, I can replicate it
if there are complaints. To be perfectly honest,
the KEEPALIVE situation is not totally clear to me,
and how it relates to a post-bridge situation is less
clear. I suspect the users will point out everything
in total clarity if this steps on anyone's toes!
3. I temporarily swap the bridge_cdr into the channel
before running the 'h' exten, which makes it possible
for users to edit the cdr before it goes out the door.
And, of course, with the endbeforehexten config var set,
the users can also get at the billsec/duration vals.
After the h exten finishes, the cdr is swapped back
and processing continues as normal.
Please, all who deal with CDR's, please test this version
of Asterisk, and file bug reports as appropriate!
........
I also made a little fix to the app_dial's 'e' option,
that is related to my updates.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@139627 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r139074 | murf | 2008-08-20 11:14:55 -0600 (Wed, 20 Aug 2008) | 12 lines
(closes issue #13263)
Reported by: brainy
Tested by: murf
The specialized reset routine is tromping on the
flags field of the CDR. I made a change to not
reset the DISABLED bit. This should get rid of this
problem.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@139083 65c4cc65-6c06-0410-ace0-fbb531ad65f3
to the Set app in trunk/1.6.x, as they come from the 1.4 world. They are only bitten if
they write their AEL dialplan in the 1.4 world, and then carry it over to a trunk/1.6.x
installation where a "make samples" was executed, or where they hand-edited the
asterisk.conf file and added the [compat] category with app_set = 1.6 (or higher).
(this commit does not totally solve 13249, at least not yet)
The change involves issueing a single warning while the AEL file is loading, if:
1. app_set is present in the config file, and set to 1.6 or higher.
2. there are double quotes in an assignment statement (eg x = "hi there";)
3. the warning was not already issued.
The standalone app, aelparse, does not (yet) issue this warning. I'd have to
have it read in the asterisk.conf file, and that's a bit of hassle. I'll add
it if users request it, tho.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@138815 65c4cc65-6c06-0410-ace0-fbb531ad65f3
of the name/value pairs, pointed out by snuffy-home on #asterisk-commits.
For those of you who rely on the position of name/value pairs in manager
events... stop... that is why associative arrays were invented.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@138482 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r138027 | russell | 2008-08-15 10:07:16 -0500 (Fri, 15 Aug 2008) | 9 lines
Ensure that when a hangup occurs in autoservice, that a hangup frame gets
properly deferred to be read from the channel owner when it gets taken out
of autoservice.
(closes issue #12874)
Reported by: dimas
Patches:
v1-12874.patch uploaded by dimas (license 88)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@138028 65c4cc65-6c06-0410-ace0-fbb531ad65f3
would reset to 500 ms every time a non-voice frame
was received. The total time we poll should be 500 ms, so
now we save the amount of time left after the poll returned
and use that as our argument for the next call to poll
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@136633 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Instead, poll the channel until receiving a voice frame. The
cap on this poll is 500 ms.
The optional delay is still allowable in the Answer() application,
but the delay has been moved back to its original position, after
the call to the channel's answer callback. The poll for the voice
frame will not happen if a delay is specified when calling Answer().
(closes issue #12708)
Reported by: kactus
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@136631 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r136062 | mmichelson | 2008-08-06 10:58:40 -0500 (Wed, 06 Aug 2008) | 16 lines
Since adding the AST_CONTROL_SRCUPDATE frame type,
there are places where ast_rtp_new_source may be called
where the tech_pvt of a channel may not yet have an
rtp structure allocated. This caused a crash in chan_skinny,
which was fixed earlier, but now the same crash has been
reported against chan_h323 as well. It seems that the best
solution is to modify ast_rtp_new_source to not attempt to
set the marker bit if the rtp structure passed in is NULL.
This change to ast_rtp_new_source also allows the removal
of what is now a redundant pointer check from chan_skinny.
(closes issue #13247)
Reported by: pj
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@136063 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r135841 | mmichelson | 2008-08-05 19:25:10 -0500 (Tue, 05 Aug 2008) | 27 lines
Merging the issue11259 branch.
The purpose of this branch was to take into account
"burps" which could cause jitterbuffers to misbehave.
One such example is if the L option to Dial() were used
to inject audio into a bridged conversation at regular
intervals. Since the audio here was not passed through
the jitterbuffer, it would cause a gap in the jitterbuffer's
timestamps which would cause a frames to be dropped for a
brief period.
Now ast_generic_bridge will empty and reset the jitterbuffer
each time it is called. This causes injected audio to be handled
properly.
ast_generic_bridge also will empty and reset the jitterbuffer
if it receives an AST_CONTROL_SRCUPDATE frame since the change
in audio source could negatively affect the jitterbuffer.
All of this was made possible by adding a new public API call
to the abstract_jb called ast_jb_empty_and_reset.
(closes issue #11259)
Reported by: plack
Tested by: putnopvut
........
r135847 | mmichelson | 2008-08-05 19:27:54 -0500 (Tue, 05 Aug 2008) | 4 lines
Revert inadvertent changes to app_skel that occurred when
I was testing for a memory leak
........
r135850 | mmichelson | 2008-08-05 19:29:54 -0500 (Tue, 05 Aug 2008) | 3 lines
Remove properties that should not be here
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@135851 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r135799 | murf | 2008-08-05 17:13:20 -0600 (Tue, 05 Aug 2008) | 34 lines
(closes issue #12982)
Reported by: bcnit
Tested by: murf
I discovered that also, in the previous bug fixes and changes,
the cdr.conf 'unanswered' option is not being obeyed, so
I fixed this.
And, yes, there are two 'answer' times involved in this
scenario, and I would agree with you, that the first
answer time is the time that should appear in the CDR.
(the second 'answer' time is the time that the bridge
was begun).
I made the necessary adjustments, recording the first
answer time into the peer cdr, and then using that to
override the bridge cdr's value.
To get the 'unanswered' CDRs to appear, I purposely
output them, using the dial cmd to mark them as
DIALED (with a new flag), and outputting them if
they bear that flag, and you are in the right mode.
I also corrected one small mention of the Zap device
to equally consider the dahdi device.
I heavily tested 10-sec-wait macros in dial, and
without the macro call; I tested hangups while the
macro was running vs. letting the macro complete
and the bridge form. Looks OK. Removed all the
instrumentation and debug.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@135821 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: falves11
Tested by: murf
falves11 ==
The changes I introduce here seem to clear up the problem
for me. However, if they do not for you, please reopen this
bug, and we'll keep digging.
The root of this problem seems to be a subtle memory corruption
introduced when creating an extension with an empty extension
name. While valgrind cannot detect it outside of DEBUG_MALLOC
mode, when compiled with DEBUG_MALLOC, this is certain death.
The code in main/features.c is a puzzle to me. On the initial
module load, the code is attempting to add the parking extension
before the features.conf file has even been opened!
I just wrapped the offending call with an if() that will not
try to add the extension if the extension name is empty. THis
seems to solve the corruption, and let the "memory show allocations"
work as one would expect.
But, really, adding an extension with an empty name is a seriously
bad thing to allow, as it will mess up all the pattern matching
algorithms, etc. So, I added a statement to the add_extension2 code to return
a -1 if this is attempted.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@135265 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r134883 | murf | 2008-07-31 13:23:42 -0600 (Thu, 31 Jul 2008) | 51 lines
(closes issue #11849)
Reported by: greyvoip
Tested by: murf
OK, a few days of debugging, a bunch of instrumentation
in chan_sip, main/channel.c, main/pbx.c, etc. and 5 solid
notebook pages of notes later, I have made the small
tweek necc. to get the start time right on the second
CDR when:
A Calls B
B answ.
A hits Xfer button on sip phone,
A dials C and hits the OK button,
A hangs up
C answers ringing phone
B and C converse
B and/or C hangs up
But does not harm the scenario where:
A Calls B
B answ.
B hits xfer button on sip phone,
B dials C and hits the OK button,
B hangs up
C answers ringing phone
A and C converse
A and/or C hangs up
The difference in start times on the second CDR is because
of a Masquerade on the B channel when the xfer number is
sent. It ends up replacing the CDR on the B channel with
a duplicate, which ends up getting tossed out. We keep
a pointer to the first CDR, and update *that* after the
bridge closes. But, only if the CDR has changed.
I hope this change is specific enough not to muck
up any current CDR-based apps. In my defence, I
assert that the previous information was wrong,
and this change fixes it, and possibly other
similar scenarios.
I wonder if I should be doing the same thing
for the channel, as I did for the peer, but
I can't think of a scenario this might affect.
I leave it, then, as an exersize for the users,
to find the scenario where the chan's CDR
changes and loses the proper start time.
........
and as to 1.4 to trunk; have I expressed my
feelings about code shifting from one file
to another? Good.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@134922 65c4cc65-6c06-0410-ace0-fbb531ad65f3
driver into a common place for multiple channel drivers.
(closes issue #13152)
Reported by: caio1982
Patches:
atxfer_complete_sound3.diff uploaded by caio1982 (license 22)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@134401 65c4cc65-6c06-0410-ace0-fbb531ad65f3
respectively. Also, take the opportunity to clean up the CLI prompt
generation code.
(closes issue #13175)
Reported by: eliel
Patches:
cliprompt.patch uploaded by eliel (license 64)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@134353 65c4cc65-6c06-0410-ace0-fbb531ad65f3
implementations. Asterisk has, for a long time,
had its own implementation of poll(2) which
just used the input arguments to call select(2).
In 1.4, this internal implementation was used
for Darwin systems. This was removed in Asterisk
trunk at some point, but it seems as though this
was not the right move to make.
On Mac OS X, it appears as though the poll used
to gather CLI input does not respond properly
when connecting via a remote Asterisk console.
Reverting to the use of Asterisk's poll fixed
the issue.
Also, there is now an option for the configure
script, --enable-internal-poll, which will allow
for anyone to use Asterisk's internal poll
implementation in case they suspect that their
system's poll implementation is buggy.
closes issue #11928)
Reported by: adriavidal
Patches:
1.6.0-configurev2.patch uploaded by putnopvut (license 60)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@134125 65c4cc65-6c06-0410-ace0-fbb531ad65f3
called from elsewhere in Asterisk to find the current state of a device. In
that case, we want to use the cached value if it exists. The other way is when
processing a device state change. In that case, we do not want to check the
cache because returning the last known state is counter productive.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@133945 65c4cc65-6c06-0410-ace0-fbb531ad65f3
we do NOT need to uri_decode in manager.
(if I sent core%20show%20channels from a telnet
session, it should be interpreted literally, however,
if I send that from an http session, it should be
decoded, which is the behaivor now)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@133770 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r133649 | tilghman | 2008-07-25 12:19:39 -0500 (Fri, 25 Jul 2008) | 8 lines
Fix some errant device states by making the devicestate API more strict in
terms of the device argument (only without the unique identifier appended).
(closes issue #12771)
Reported by: davidw
Patches:
20080717__bug12771.diff.txt uploaded by Corydon76 (license 14)
Tested by: davidw, jvandal, murf
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@133665 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ago (does not affect 1.4), where you would pass
a pointer to the end of a character array, and
ast_uri_decode would do no good.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@133651 65c4cc65-6c06-0410-ace0-fbb531ad65f3
to Asterisk licensing information. The licensing page includes the Asterisk license,
as well as a (not yet complete) list of 3rd party libraries that may be used, as well
as what license we receive them under.
Help filling out this list in the format that I have started in doxyref.h would be
much appreciated. :)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@133575 65c4cc65-6c06-0410-ace0-fbb531ad65f3
the code checks to see if there is a cached state available, use the aggregate
cached state across all servers, and not just the local state.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@133566 65c4cc65-6c06-0410-ace0-fbb531ad65f3
this commit, only the logger thread's PID would
be printed.
(closes issue #13150)
Reported by: atis
Patches:
log_pid.diff uploaded by putnopvut (license 60)
Tested by: eliel
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@133448 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: murf
Tested by: murf
For: J. Geis
The 'data' field in the ast_exten struct was being
'moved' from the current dialplan to the replacement
dialplan. This was not good, as the current dialplan
could have problems in the time between the change
and when the new dialplan is swapped in.
So, I modified the merge_and_delete code to strdup
the 'data' field (the args to the app call), and
then it's freed as normal.
I improved a few messages; I added code to limit
the number of calls to the context_merge_incls_swits_igps_other_registrars()
to one per context. I don't think having it called
multiple times per context was doing anything bad,
but it was inefficient.
I hope this fixes the problems Mr. Geiss was noting in
asterisk-users, see
http://lists.digium.com/pipermail/asterisk-users/2008-July/215634.html
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@133299 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r133169 | mmichelson | 2008-07-23 14:39:47 -0500 (Wed, 23 Jul 2008) | 12 lines
As suggested by seanbright, the PSEUDO_CHAN_LEN in
app_chanspy should be set at load time, not at compile
time, since dahdi_chan_name is determined at load time.
Also changed the next_unique_id_to_use to have the
static qualifier.
Also added the dahdi_chan_name_len variable so that
strlen(dahdi_chan_name) isn't necessary. Thanks to
seanbright for the suggestion.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@133171 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r132872 | kpfleming | 2008-07-23 06:52:18 -0500 (Wed, 23 Jul 2008) | 2 lines
minor optimization for stringfields: when a field is being set to a larger value than it currently contains and it happens to be the most recent field allocated from the currentl pool, it is possible to 'grow' it without having to waste the space it is currently using (or potentially even allocate a new pool)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@132964 65c4cc65-6c06-0410-ace0-fbb531ad65f3
own repository, and must be installed like any other library for Asterisk to
use. The two modules that require it are codec_resample and app_jack.
To install libresample:
$ svn co http://svn.digium.com/svn/libresample/trunk libresample
$ cd libresample
$ ./configure
$ make
$ sudo make install
This code is currently in our own repository because the build system did not
include the appropriate targets for building a dynamic library or for installing
the library.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@132390 65c4cc65-6c06-0410-ace0-fbb531ad65f3
removed early (before the routine to load the configuration was
finished) because a variable wasn't initialized.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@132242 65c4cc65-6c06-0410-ace0-fbb531ad65f3
probably not a good idea, as we might run out of stack space. Therefore,
changing this over to use the ast_str infrastructure for buffers is
probably a good idea.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@132206 65c4cc65-6c06-0410-ace0-fbb531ad65f3
the same keyword as the other files (patch by eliel).
(closes issue #13104)
Reported by: eliel
Patches:
revision.patch uploaded by eliel (license 64)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@132050 65c4cc65-6c06-0410-ace0-fbb531ad65f3
a feature without specifying a group or feature to register.
(closes issue #13101)
Reported by: eliel
Patches:
features.c.patch uploaded by eliel (license 64)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@131717 65c4cc65-6c06-0410-ace0-fbb531ad65f3
calculate the number of bytes from a sysinfo structure.
unsigned long.
(closes issue #13057)
Reported by: eliel
Patches:
asterisk.c.patch uploaded by eliel (license 64)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@131445 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Tilghman Lesher
Steve Murphy
Russell Bryant
BJ Weschke
Kevin P. Fleming
Michiel van Baak
Mark Michelson
Olle Johansson
Sean Bright
Jeff Peeler
Terry Wilson
Richard Mudgett
Dwayne M. Hubbard
Brett Bryant
Brandon Kruse
Pari Nannapaneni