https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r81120 | mmichelson | 2007-08-27 16:08:48 -0500 (Mon, 27 Aug 2007) | 7 lines
DTMF begin frames should be ignored so that when an agent acks a call with the '#' key,
he doesn't cause a queue's announce file to be interrupted. Also went ahead and did the
same for the '*' key and for ending a call.
(closes issue #10528, reported by deskhack, patched by me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@81121 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r81012 | file | 2007-08-27 12:01:59 -0300 (Mon, 27 Aug 2007) | 6 lines
(closes issue #10561)
Reported by: jesselang
Patches:
chan_sip-ChannelReload-20080825.patch uploaded by jesselang (license 202)
Remove an extra \r\n to make the ChannelReload event conform with every other event.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@81013 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r80895 | russell | 2007-08-25 12:37:39 -0500 (Sat, 25 Aug 2007) | 7 lines
Fix some issues with the handling of the scheduler in chan_iax2. Most of the
places that scheduled items to be executed by the scheduler thread did not
signal the scheduler thread to wake up so that it could recalculate the time
until the next action. These changes will make the scheduler thread more
responsive and ensure that actions get executed as close to when intended as
possible instead of it being possible for very long delays.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@80898 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r80849 | russell | 2007-08-24 16:22:50 -0500 (Fri, 24 Aug 2007) | 5 lines
If dnsmgr is in use, and no DNS servers are available when Asterisk first
starts, then don't give up on poking peers. Allow the poke to get rescheduled
so that it will work once the dnsmgr is able to resolve the host.
(closes issue #10521, patch by jamesgolovich)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@80850 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r80661 | phsultan | 2007-08-24 13:42:46 +0200 (Fri, 24 Aug 2007) | 9 lines
Closes issue #10509
Googletalk calls are answered too early, which results in CDRs wrongly
stating that a call was ANSWERED when the calling party cancelled a
call before before being established.
We must not answer the call upon reception of a 'transport-accept' iq
packet, but this packet still needs to be acknowledged, otherwise the
remote peer would close the call (like in #8970).
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@80662 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r80362 | russell | 2007-08-22 15:21:36 -0500 (Wed, 22 Aug 2007) | 34 lines
Merge changes from team/russell/iax_refcount.
This set of changes fixes problems with the handling of iax2_user and iax2_peer
objects. It was very possible for a thread to still hold a reference to one of
these objects while a reload operation tries to delete them. The fix here is to
ensure that all references to these objects are tracked so that they can't go away
while still in use.
To accomplish this, I used the astobj2 reference counted object model. This
code has been in one of Luigi Rizzo's branches for a long time and was primarily
developed by one of his students, Marta Carbone. I wanted to go ahead and bring
this in to 1.4 because there are other problems similar to the ones fixed by these
changes, so we might as well go ahead and use the new astobj if we're going to go
through all of the work necessary to fix the problems.
As a nice side benefit of these changes, peer and user handling got more efficient.
Using astobj2 lets us not hold the container lock for peers or users nearly as long
while iterating. Also, by changing a define at the top of chan_iax2.c, the objects
will be distributed in a hash table, drastically increasing lookup speed in these
containers, which will have a very big impact on systems that have a large number of
users or peers.
The use of the hash table will be made the default in trunk. It is not the default
in 1.4 because it changes the behavior slightly. Previously, since peers and users
were stored in memory in the same order they were specified in the configuration file,
you could influence peer and user matching order based on the order they are specified
in the configuration. The hash table does not guarantee any order in the container,
so this behavior will be going away. It just means that you have to be a little
more careful ensuring that peers and users are matched explicitly and not forcing
chan_iax2 to have to guess which user is the right one based on secret, host, and
access list settings, instead of simply using the username.
If you have any questions, feel free to ask on the asterisk-dev list.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@80387 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r80183 | russell | 2007-08-21 13:42:15 -0500 (Tue, 21 Aug 2007) | 7 lines
Don't record SIP dialog history if it's not turned on. Also, put an upper
limit on how many history entires will be stored for each SIP dialog. It is
currently set to 50, but can be increased if deemed necessary.
(closes issue #10421, closes issue #10418, patches suggested by jmoldenhauer,
patches updated by me)
(Security implications documented in AST-2007-020)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@80184 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r79912 | russell | 2007-08-17 16:01:43 -0500 (Fri, 17 Aug 2007) | 4 lines
Avoid a crash in the handling of DTMF based Caller ID. It is valid for
ast_read to return NULL in the case that the channel has been hung up.
(crash reported by anonymouz666 on IRC in #asterisk-dev)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@79913 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
(closes issue #10430)
........
r79904 | qwell | 2007-08-17 14:12:19 -0500 (Fri, 17 Aug 2007) | 11 lines
Don't send a semicolon over the wire in sip notify messages.
Caused by fix for issue 9938.
I basically took the code that existed before 9938 was fixed, and
copied it into a new function - ast_unescape_semicolon
There should be very few places this will be needed (pbx_config
does NOT need this (see issue 9938 for details))
Issue 10430, patch by me, with help/ideas from murf (thanks murf).
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@79905 65c4cc65-6c06-0410-ace0-fbb531ad65f3
in place of a very common construct. I also used it in a number of places
in chan_sip.
if (id > -1)
ast_sched_del(sched, id);
id = ast_sched_add(sched, ...);
changes to:
ast_sched_replace(id, sched, ...);
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@79861 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r79857 | russell | 2007-08-17 08:37:08 -0500 (Fri, 17 Aug 2007) | 5 lines
Fix some crashes in chan_sip. This patch changes various places that add items
to the scheduler to ensure that they don't overwrite the ID of a previously
scheduled item. If there is one, it should be removed.
(closes issue #10391, closes issue #10256, probably others, patch by me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@79858 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r79833 | crichter | 2007-08-17 10:22:36 +0200 (Fr, 17 Aug 2007) | 1 line
sometimes we don't need to signal dtmf tones to asterisk, we just want them to go through as inband. Otherwise they might be generated by the other channel partner and then there is a double tone.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@79841 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r79756 | russell | 2007-08-16 16:29:24 -0500 (Thu, 16 Aug 2007) | 11 lines
Fix more deadlocks in chan_iax2 that were introduced by making frame handling
and scheduling multi-threaded. Unfortunately, we have to do some expensive
deadlock avoidance when queueing frames on to the ast_channel owner of the IAX2
pvt struct. This was already handled for regular frames, but ast_queue_hangup
and ast_queue_control were still used directly. Making these changes introduced
even more places where the IAX2 pvt struct can disappear in the context of a
function holding its lock due to calling a function that has to unlock/lock it
to avoid deadlocks. I went through and fixed all of these places to account for
this possibility.
(issue #10362, patch by me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@79764 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r79748 | mmichelson | 2007-08-16 16:16:40 -0500 (Thu, 16 Aug 2007) | 8 lines
Fixes a problem where agents would get stuck busy due to their wrapuptime being longer than the queue's wrapuptime and
ringinuse=no for the queue.
(closes issue #10215, reported by Doug, repaired by me)
Special thanks to fkasumovic for pointing out the source of the problem and to bweschke for helping to come up with a solution!
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@79749 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r79523 | file | 2007-08-15 11:18:44 -0300 (Wed, 15 Aug 2007) | 6 lines
(closes issue #10456)
Reported by: irroot
Patches:
sip_timeout.patch uploaded by irroot (license 52)
Change hardcoded timer value to defined value. I'm doing this in 1.4 as well so if it needs to be changed in the future this place would not have been forgotten.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@79524 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r79276 | russell | 2007-08-13 15:18:30 -0500 (Mon, 13 Aug 2007) | 4 lines
Release the pvt lock before calling find_peer in register_verify to avoid a
deadlock. Also, remove some unnecessary locking in auth_fail that was only done
recursively.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@79277 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r79272 | russell | 2007-08-13 14:27:39 -0500 (Mon, 13 Aug 2007) | 9 lines
I am fighting deadlocks in chan_iax2. I have tracked them down to a single
core issue. You can not call find_callno() while holding a pvt lock as this
function has to lock another (every) other pvt lock. Doing so can lead to a
classic deadlock. So, I am tracking down all of the code paths where this
can happen and fixing them.
The fix I committed earlier today was along the same theme. This patch fixes
some code down the path of authenticate_reply.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@79273 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r79214 | russell | 2007-08-13 10:28:13 -0500 (Mon, 13 Aug 2007) | 4 lines
Fix a potential deadlock in socket_process. check_provisioning can eventually
call find_callno. You can't hold a pvt lock while calling find_callno because
it goes through and locks every single one looking for a match.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@79222 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r79174 | file | 2007-08-13 11:18:04 -0300 (Mon, 13 Aug 2007) | 4 lines
(closes issue #10437)
Reported by: haklin
Don't set the callerid name and number a second time on a newly created channel. ast_channel_alloc itself already sets it and setting it twice would cause a memory leak.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@79175 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r78103 | mmichelson | 2007-08-03 15:25:22 -0500 (Fri, 03 Aug 2007) | 7 lines
Changed the behavior of sip's realtime_peer function to match the corresponding way of matching for non-realtime peers.
Now matches are made on both the IP address and port number, or if the insecure setting is set to "port" then just match on the
IP address.
In order to accomplish this, I also added a new API call, ast_category_root, which returns the first variable of an ast_category struct
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@78186 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r78182 | file | 2007-08-06 13:32:44 -0300 (Mon, 06 Aug 2007) | 2 lines
It is possible for a transfer to occur before the remote device has our tag in which case they send none in the transfer. In this case we need to not fail the transfer dialog lookup.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@78183 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r78063 | russell | 2007-08-03 12:01:07 -0500 (Fri, 03 Aug 2007) | 4 lines
Only pass through HOLD and UNHOLD control frames when the mohinterpret option
is set to "passthrough". This was pointed out by Kevin in the middle of a
training session.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@78064 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r78028 | russell | 2007-08-02 21:04:22 -0500 (Thu, 02 Aug 2007) | 6 lines
Don't reuse the timespec that was set to 0 in the previous timedwait as it
will just return immediately. Also, fix some logic so the thread's lock
isn't unlocked twice in the weird case of dynamic threads getting acquired
right after a timeout.
(pointed out by SteveK)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@78029 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r77949 | russell | 2007-08-02 14:25:14 -0500 (Thu, 02 Aug 2007) | 5 lines
Fix the case where a dynamic thread times out waiting for something to do
during the first time it runs. This shouldn't ever happen, but we should
account for it anyway.
(pointed out by pete, who works with mihai)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77950 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
(closes issue #10299)
........
r77947 | qwell | 2007-08-02 13:42:36 -0500 (Thu, 02 Aug 2007) | 5 lines
Make sure we clear the prompt status message on a hangup.
Also rearrange messages to better fit with what a wireshark trace shows it should be.
Issue 10299, initial patch and solution by sbisker, modified by me to fit with wireshark trace.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77948 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r77943 | russell | 2007-08-02 13:04:43 -0500 (Thu, 02 Aug 2007) | 9 lines
Fix another race condition in the handling of dynamic threads. If the dynamic
thread timed out waiting for something to do, but was acquired to perform an
action immediately afterwords, then wait on the condition again to give the
other thread a chance to finish setting up the data for what action this thread
should perform. Otherwise, if it immediately continues, it will perform the
wrong action.
(reported on IRC by mihai, patch by me)
(related to issue #10289)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77944 65c4cc65-6c06-0410-ace0-fbb531ad65f3
trunk version of find_idle_thread() where the old full frame processing
information was not cleared out. This would have caused full frames to get
deferred for processing by threads that weren't actually processing frames for
that call. Nice catch!!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77941 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
(closes issue #10358)
........
r77894 | qwell | 2007-08-02 10:15:45 -0500 (Thu, 02 Aug 2007) | 5 lines
Make sure that we show the correct extension if dialed from a macro
"From: 5555" rather than "From: s"
Issue 10358, initial patch by DEA, reworked by me to use S_OR, tested by sbisker
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77895 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r77887 | russell | 2007-08-01 17:16:17 -0500 (Wed, 01 Aug 2007) | 23 lines
Fix some race conditions which have been causing weird problems in chan_iax2.
The most notable problem is that people have been seeing storms of VNAK frames
being sent due to really old frames mysteriously being in the retransmission
queue and never getting removed.
It was possible that a dynamic thread got created, but did not acquire its lock
before the thread that created it signals it to perform an action. When this
happens, the thread will sleep until it hits a timeout, and then get destroyed.
So, the action never gets performed and in some cases, means a frame doesn't
get transmitted and never gets freed since the scheduler never gets a chance
to reschedule transmission.
Another less severe race condition is in the handling of a timeout for a dynamic
thread. It was possible for it to be acquired to perform at action at the same
time that it hit a timeout. When this occurs, whatever action it was acquired
for would never get performed.
(patch contributed by Mihai and SteveK)
(closes issue #10289)
(closes issue #10248)
(closes issue #10232)
(possibly related to issue #10359)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77889 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r77883 | qwell | 2007-08-01 16:08:42 -0500 (Wed, 01 Aug 2007) | 7 lines
Fix an issue that caused one-way audio on some newer devices (specifically the 7921),
due to sending packets in the wrong order during hangup.
Also make sure we clear tones/messages on the correct line/instance.
Issue 10291, patch by DEA, tested by sbisker and myself.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77884 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r77824 | mmichelson | 2007-07-31 10:21:22 -0500 (Tue, 31 Jul 2007) | 6 lines
This patch makes Asterisk send 100 Trying provisional responses upon receipt of re-invites. This makes it so that if there are two or more Asterisk
servers between endpoints, the Asterisk servers will not keep retransmitting the re-invites.
(closes issue #10274, reported by cstadlmann, patched by me with approval from file)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77825 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r77794 | russell | 2007-07-30 15:16:43 -0500 (Mon, 30 Jul 2007) | 8 lines
Fix an issue that could potentially cause corruption of the global iax frame
queue. In the network_thread() loop, it traverses the list using the
AST_LIST_TRAVERSE_SAFE macro. However, to remove an element of the list within
this loop, it used AST_LIST_REMOVE, instead of AST_LIST_REMOVE_CURRENT, which I
believe could leave some of the internal variables of the SAFE macro invalid.
Mihai says that he already made this change in his local copy and it didn't help
his VNAK storm issues, but I still think it's wrong. :)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77797 65c4cc65-6c06-0410-ace0-fbb531ad65f3
+ place the link field at the beginning of struct sip_pvt,
and not somewhere in the middle;
+ in __sip_reliable_xmit, remove a duplicate assignment, and
put the statements in a more logical order (i.e. first copy
the payload and associated info, then copy arguments from the
caller, then finish initializing the headers...)
nothing to backport.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77766 65c4cc65-6c06-0410-ace0-fbb531ad65f3
SIP_NOVIDEO, SIP_DIALOG_ANSWEREDELSEWHERE, SIP_PAGE2_NOTEXT,
SIP_PAGE2_OUTGOING_CALL
These are seldom used so the diff is relatively small.
Note that 'OUTGOING_CALL' is dangerously similar to another
dialog flag, 'SIP_OUTGOING', so the description will need to
clarify the different meaning of the two.
Also note that the description of NOTEXT is a bit unclear - does
it mean we don't support it, or 'not requested or not supported' ?
On passing fix a comment referring to video instead of text.
Finally, mark with XXX a possibly misleading debugging message.
(maybe the latter is worth backporting).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77739 65c4cc65-6c06-0410-ace0-fbb531ad65f3
CLI lines. This helps maintaining consistency on output, slightly
improves readability, and maybe one day will make it easier to
translate the output in other languages (though i have a hard time
believing that a CLI user who needs 'yes' and 'no' to be translated
can actually figure out what he/she is doing!)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77726 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Start putting these variables in a single struct (called 'sip_cfg' for the time
being, but it could as well be 'global' or some other name) so it
is easy, when reading the code, to figure out what they are for.
The downside of using struct fields instead of individual global
variables is that the compiler cannot tell if there are unused fields.
But the advantage of not cluttering the namespace and manilpulating
all these variables at once certainly overcome the disadvantagess.
Nothing to backport, again.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77711 65c4cc65-6c06-0410-ace0-fbb531ad65f3
at load time instead of duplicating the initializer.
This should remove the risk of forgetting fields in the
initializer.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77684 65c4cc65-6c06-0410-ace0-fbb531ad65f3
use AST_FORMAT_AUDIO_MASK instead of playing with AST_FORMAT_MAX_AUDIO
to determine audio formats.
There is a dubious use of AST_FORMAT_MAX_AUDIO in sip_request_call()
which surely needs fixing, namely:
/* mask request with some set of allowed formats.
* XXX this needs to be fixed.
* The original code uses AST_FORMAT_AUDIO_MASK, but it is
* unclear what to use here. We have global_capabilities, which is
* configured from sip.conf, and sip_tech.capabilities, which is
* hardwired to all audio formats.
*/
The latter is possibly something to backport when fixed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77682 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Move together flags used in the same way (e.g. dialog only,
dialog-peer, ...) so it will become easier to deal with them
in a more systematic way.
This is being done in stages so it will be easier to detect
breakage, if any should occur.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77669 65c4cc65-6c06-0410-ace0-fbb531ad65f3
the original pointer while calling the function.
on passing add some comments on one of the places where it
is used, and explain why it is safe there.
again, a no-op for practical purposes.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77654 65c4cc65-6c06-0410-ace0-fbb531ad65f3
dialog_ref/unref (they are a no-op at the moment).
Also clean a pointer after freeing memory to avoid
dangling references, and write a for() loop in canonical form.
In practice, everything in this commit is a no-op.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77653 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit is, for all practical purposes, a no-op, as it only
introduces the dialog_ref() and dialog_unref() methods, and uses them
in a few places (not all the places where they would be needed).
The goal is to start annotating the code with these calls, so the transition
to a proper container will be easier.
Nothing to backport.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77647 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In a nutshell, these fields are used to tell a sip entity
the address and port its request came from, and are extremely
useful in the presence of NATs, especially with symmetric NATs
where STUN is totally ineffective.
This patch stores the address and port in the 'ourip' field of
the dialog descriptor, so they can be reused in subsequent transactions.
As it is, it works well for things like REGISTER requiring authentication,
because the second REGISTER request (with auth credentials) will carry
the correct address. Maybe it can also be useful, in case of an address
change, to do one or both of the following:
+ propagate the new address to the parent user/peer descriptor so that new
dialogs will use the correct address from the beginning.
This is trivial to implement, I am just waiting for feedback on this.
+ re-issue a request in case of an address change. This a lot less trivial,
maybe unnecessary, and probably covered by the previous item.
I would seriously consider this patch for addition to 1.4 and 1.2.
The code is very little intrusive, and it would solve in a correct
way the nat traversal problems for which externip/externaddr/stunaddr
are only a partial and expensive workaround.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77616 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r77536 | file | 2007-07-27 13:27:16 -0300 (Fri, 27 Jul 2007) | 6 lines
(closes issue #10323)
Reported by: julianjm
Patches:
chan_sip_device_state_hold_fix.v1.diff.txt uploaded by julianjm (license 99)
Clear ONHOLD flag when decrementing the onHold peer count. If we did not do this the count may keep decreasing.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77537 65c4cc65-6c06-0410-ace0-fbb531ad65f3
At first sight (but the function is very large so i am not 100% sure)
the code seems correct, so maybe my compiler is just not smart
enough to figure that out at the optimization level it has.
Not worthwhile merging to 1.4 i believe.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77156 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This allows you to just Dial(Skinny/line), as long as line isn't ambiguous.
Note that this does not remove or deprecate the "old" syntax, as it's still
quite useful - even moreso if shared lines get implemented.
Initial patch by me, with some changes and suggestions from wedhorn.
(closes issue #10263)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76785 65c4cc65-6c06-0410-ace0-fbb531ad65f3
using old methods of parsing arguments to using the standard macros. However, the big
change is that the really old way of specifying application and arguments separated by
a comma will no longer work (e.g. NoOp,foo|bar). Instead, the way that has been
recommended since long before 1.0 will become the only method available (e.g. NoOp(foo,bar).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76703 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r76654 | file | 2007-07-23 15:29:48 -0300 (Mon, 23 Jul 2007) | 12 lines
Merged revisions 76653 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r76653 | file | 2007-07-23 15:28:13 -0300 (Mon, 23 Jul 2007) | 4 lines
(closes issue #5866)
Reported by: tyler
Do not force channel format changes when a generator is present. The generator may have changed the formats itself and changing them back would cause issues.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76655 65c4cc65-6c06-0410-ace0-fbb531ad65f3
does not use DTMF BEGIN frames.
1.4 seems correct (it does not have the two fields).
However, as this bug shows, the current way of creating the sip_tech
replica is too error-prone, one can easily forget to update one of
the two entries. Perhaps it would be better to create sip_tech_info
expliclty at module load, by doing
sip_tech_info = sip_tech;
sip_tech_info.send_digit_begin = NULL
(in this case, this is something applicable to 1.4 as well).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76564 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: snuffy
Patches:
doxygen-updates.diff uploaded by snuffy (license 35)
Another big batch of doxygen documentation updates
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76559 65c4cc65-6c06-0410-ace0-fbb531ad65f3
between integers and strings using a single translation table,
and use them in a few places instead of ad-hoc routines
that duplicate the table.
On passing, note that REFER_CONFIRMED is never used, and add a
few comments.
Nothing to backport here.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76547 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r76485 | russell | 2007-07-23 07:25:01 -0500 (Mon, 23 Jul 2007) | 6 lines
Use a signed integer for storing the number of bytes in the packet read from
the network. Using an unsigned value here made it impossible to handle an
error returned from recvfrom(). Furthermore, in the case that recvfrom()
did return an error, this would cause a crash due to a heap overflow.
(closes issue #10265, reported by and fix suggested by timrobbins)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76486 65c4cc65-6c06-0410-ace0-fbb531ad65f3
foo = sip_destroy(foo);
and reduce the chance of bugs due to dangling pointers.
Also remove a duplicate prototype for the function.
nothing to backport.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76392 65c4cc65-6c06-0410-ace0-fbb531ad65f3
responses, so that there is a common exit point.
Mark two places where probably we could return -1 instead of 0 to report
an error to the caller.
(change triggered by investigations on how the 'SIP_PKT_IGNORE' field was used).
nothing to backport from this commit
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76371 65c4cc65-6c06-0410-ace0-fbb531ad65f3
individual variables. Apart from SIP_PKT_IGNORE which was used
a zillion times, the other two are used seldom.
On passing:
- move the arrays to the end of struct sip_request, so a (small)
buffer overflow is less likely to overwrite the other fields;
- note that the 'ignore' argument to handle_invite_replaces() is not
used and should be removed (will be done in a separate commit).
Nothing to backport in this change.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76365 65c4cc65-6c06-0410-ace0-fbb531ad65f3
variables and not flags.
NOTE:
The old behaviour (preserved in this commit) is that if sipdebug
is set in the config file, it can only be disabled by reloading the
config. I am not sure if this is accidental or voluntary, but it
is really unconvenient and I think it should be handled in the same
way as other options i.e. consider requests from the config file
or the cli (or the command line) to be fully equivalent and act on
the same status variable.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76330 65c4cc65-6c06-0410-ace0-fbb531ad65f3
before using it.
I am unclear on the details right now so i hope someone can comment
more. The obvious (and lazy) approach would be to bzero() all of it
(except for the string pool), but isn't that too much work ?
Feedback wanted here...
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76313 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Tilghman Lesher
Joshua Colp
Russell Bryant
Mark Michelson
Matthew Fredrickson
Philippe Sultan
Kevin P. Fleming
Jason Parker
Christian Richter
Dwayne M. Hubbard
Steve Murphy
Luigi Rizzo