POSIX does not require getprotobyname() to be thread safe and some
implementations use static memory which causes issues when multiple
threads are used.
Further, our usage of it today is just to ultimately get IPPROTO_TCP
for calls to setsockopt(). So instead we just use IPPROTO_TCP directly.
Change-Id: I2e14e58674808f7ce99b2f5e900d0f90d0d8da48
* manager.c:manager_state_cb() Fix potential use of uninitialized hint[]
if a hint does not exist for the requested extension. Ran into this when
developing a testsuite test. The AMI event ExtensionStatus came out with
the hint header value containing garbage. The AMI event PresenceStatus
also had the same issue.
* manager.c:action_extensionstate() no need to completely initialize the
hint[]. Only initialize the first element.
* pbx.c:ast_add_hint() Remove unnecessary assignment.
* chan_sip.c: Eliminate an unneeded hint[] local variable. We only care
about the return value of ast_get_hint() there.
Change-Id: Ia9a8786f01f93f1f917200f0a50bead0319af97b
When AMI encounters an error at the beginning of a session, it would
explicitly call ast_iostream_close() on its tcptls session's iostream.
It then would jump to a label where it would shut down the tcptls
session instance. The tcptls session instance would again attempt to
close the iostream.
Under normal circumstances, this might go by unnoticed. However, when
MALLOC_DEBUG is enabled, all fields on the iostream get set to
0xdeaddead when the iostream is freed. Thus a second call to
ast_iostream_close() after the iostream has been freed would reslt in an
attempt to call SSL_shutdown on 0xdeaddead, which would crash and burn
horribly.
The fix here is to not directly close the iostream from the dangerous
scenarios. The specific scenarios are:
* Exceeding the configured authlimit
* Failing to build a mansession on a new connection
Change-Id: I908f98d516afd5a263bd36b072221008a4731acd
In Asterisk 11, if the 'Originate' AMI command failed to connect the provided
Channel while in extension mode, a 'failed' extension would be looked up and
run. This was, I believe, unintentionally removed in 51b6c49. This patch
restores that behavior.
This also adds an enum for the various 'synchronous' modes in an attempt to
make them meaningful.
ASTERISK-26115 #close
Reported by: Nasir Iqbal
Change-Id: I8afbd06725e99610e02adb529137d4800c05345d
The escalator works by creating a set of startup commands in cli.conf
that set up logger channels and issue the debug commands for the
subsystems specified. If asterisk is running when it is executed,
the same commands will be issued to the running instance. The original
cli.conf is saved before any changes are made and can be restored by
executing '$prog --reset'.
The log output will be stored in...
$astlogdir/message.$uniqueid
$astlogdir/debug.$uniqueid
$astlogdir/dtmf.$uniqueid
$astlogdir/fax.$uniqueid
$astlogdir/security.$uniqueid
$astlogdir/pjsip_history.$uniqueid
$astlogdir/sip_history.$uniqueid
Some minor tweaks were made to chan_sip, and res_pjsip_history
so their history output could be send to a log channel as packets
are captured.
A minor tweak was also made to manager so events are output to verbose
when "manager set debug on" is issued.
Change-Id: I799f8e5013b86dc5282961b27383d134bf09e543
fopencookie/funclose is a non-standard API and should not be used
in portable software. Additionally, the way FILE's fd is used in
non-blocking mode is undefined behaviour and cannot be relied on.
This introduces internal abstraction for io streams, that allows
implementing the desired virtualization of read/write operations
with necessary timeout handling.
ASTERISK-24515 #close
ASTERISK-24517 #close
Change-Id: Id916aef418b665ced6a7489aef74908b6e376e85
ASTERISK_REGISTER_FILE no longer has any purpose so this commit removes
all traces of it.
Previously exported symbols removed:
* __ast_register_file
* __ast_unregister_file
* ast_complete_source_filename
This also removes the mtx_prof static variable that was declared when
MTX_PROFILE was enabled. This variable was only used in lock.c so it
is now initialized in that file only.
ASTERISK-26480 #close
Change-Id: I1074af07d71f9e159c48ef36631aa432c86f9966
Stasis subscriptions and message routers create taskprocessors to process
the event messages. API calls are needed to be able to set the congestion
levels of these taskprocessors for selected subscriptions and message
routers.
* Updated CDR, CEL, and manager's stasis subscription congestion levels
based upon stress testing. Increased the congestion levels to reduce the
potential for bursty call setup/teardown activity from triggering the
taskprocessor overload alert. CDRs in particular need an extra high
congestion level because they can take awhile to process the stasis
messages.
ASTERISK-26088
Reported by: Richard Mudgett
Change-Id: Id0a716394b4eee746dd158acc63d703902450244
Improve AMI message processing performance if there are no consumers
listening for the messages. We now skip creating the AMI event message
text strings.
Change-Id: I7b22fc5ec4e500d00635c1a467aa8ea68a1bb2b3
* Made ast_manager_event_blob_create() not allocate the ao2 event object
with a lock as it is not needed.
Change-Id: I8e11bfedd22c21316012e0b9dd79f5918f644b7c
This eliminates some casts that I made a note saying v10 and above
would no longer need them.
Better late than never :)
Change-Id: I346cdb3032b6478ceb40eb6fe732978b54035572
During stress testing, we have frequently seen crashes occur because a
CLI or AMI command attempts to access information that is in the process
of being destroyed.
When addressing how to fix this issue, we initially considered fixing
individual crashes we observed. However, the changes required to fix
those problems would introduce considerable overhead to the nominal
case. This is not reasonable in order to prevent a crash from occurring
while Asterisk is already shutting down.
Instead, this change makes it so AMI and CLI commands cannot be executed
if Asterisk is being shut down. For AMI, this is absolute. For CLI,
though, certain commands can be registered so that they may be run
during Asterisk shutdown.
ASTERISK-25825 #close
Change-Id: I8887e215ac352fadf7f4c1e082da9089b1421990
When the asterisk sending OriginateResponse message,
it doesn't set the "Uniqueid".
And it didn't support correct response message for
Application originate.
ASTERISK-25624 #close
Change-Id: I26f54f677ccfb0b7cfd4967a844a1657fd69b74d
When GetConfigJSON was introduced back in 1.6, it returned each
section as an array of strings: ["key=value", "key2=value2"].
Afterwards, it was changed a few times and became
["key": "value", "key2": "value2"], which is not a correct JSON.
This patch fixes that by constructing a JSON object {} instead of
an array [].
Also, the keys "istemplate" and "tempates" that are used to
indicate templates and their inherited categories are now wrapped in
quotes.
ASTERISK-25391 #close
Reported by: Bojan Nemčić
Change-Id: Ibbe93c6a227dff14d4a54b0d152341857bcf6ad8
Fix the alphabetic order added on ast_manager_register_struct. The order
for struct manager_action added is not working, this change fixes the
problem.
Change-Id: I149da0cd06c3c4445d7516cc303358e9f26f8b4b
This patch has two main purposes:
1) Improve warning messages when ACLs are configured improperly.
2) Prevent misconfigured ACLs from allowing potentially unwanted
traffic.
To acomplish point (2) in most cases, whatever configuration object that
the ACL belonged to was not allowed to load.
The one exception is res_pjsip_acl. In that case, ACLs are their own
configuration object. Furthermore, the module loading code has no
indication that a ACL configuration had a failure. So the tactic taken
here is to create an ACL that just blocks everything.
ASTERISK-24969
Reported by Corey Farrell
Change-Id: I2ebcb6959cefad03cea4d81401be946203fcacae
This change modifies how the the output from a CLI command is sent
to a client over AMI.
Output from the CLI command is now sent as a series of zero-or-more
Output: headers.
Additionally, commands that fail to execute (eg: no such command,
invalid syntax etc.) now cause an Error response instead of Success.
If the command executed successfully, but the manager unable to
provide the output the reason will be included in the Message:
header. Otherwise it will contain 'Command output follows'.
Depends on a new version of starpy (> 1.0.2) that supports the new
output format.
See pull-request https://github.com/asterisk/starpy/pull/34
ASTERISK-24730
Change-Id: I6718d95490f0a6b3f171c1a5cdad9207f9a44888
When AMI receives a line that is 1025 bytes long, it sends two error
messages. Copy the last byte in the buffer to the first postiion,
set the length to 1.
ASTERISK-20524 #close
Reported by: David M. Lee
Change-Id: Ifda403e2713b59582c715229814fd64a0733c5ea
Git does not support the ability to replace a token with a version
string during check-in. While it does have support for replacing a
token on clone, this is somewhat sub-optimal: the token is replaced
with the object hash, which is not particularly easy for human
consumption. What's more, in practice, the source file version was often
not terribly useful. Generally, when triaging bugs, the overall version
of Asterisk is far more useful than an individual SVN version of a file. As a
result, this patch removes Asterisk's support for showing source file
versions.
Specifically, it does the following:
* Rename ASTERISK_FILE_VERSION macro to ASTERISK_REGISTER_FILE, and
remove passing the version in with the macro. Other facilities
than 'core show file version' make use of the file names, such as
setting a debug level only on a specific file. As such, the act of
registering source files with the Asterisk core still has use. The
macro rename now reflects the new macro purpose.
* main/asterisk:
- Refactor the file_version structure to reflect that it no longer
tracks a version field.
- Remove the "core show file version" CLI command. Without the file
version, it is no longer useful.
- Remove the ast_file_version_find function. The file version is no
longer tracked.
- Rename ast_register_file_version/ast_unregister_file_version to
ast_register_file/ast_unregister_file, respectively.
* main/manager: Remove value from the Version key of the ModuleCheck
Action. The actual key itself has not been removed, as doing so would
absolutely constitute a backwards incompatible change. However, since
the file version is no longer tracked, there is no need to attempt to
include it in the Version key.
* UPGRADE: Add notes for:
- Modification to the ModuleCheck AMI Action
- Removal of the "core show file version" CLI command
Change-Id: I6cf0ff280e1668bf4957dc21f32a5ff43444a40e
These are fixes for compilation under gcc 5.0...
chan_sip.c: In parse_request needed to make 'lim' unsigned.
inline_api.h: Needed to add a check for '__GNUC_STDC_INLINE__' to detect C99
inline semantics (same as clang).
ccss.c: In ast_cc_set_parm, needed to fix weird comparison.
dsp.c: Needed to work around a possible compiler bug. It was throwing
an array-bounds error but neither
sgriepentrog, rmudgett nor I could figure out why.
manager.c: In action_atxfer, needed to correct an array allocation.
This patch will go to 11, 13, trunk.
Review: https://reviewboard.asterisk.org/r/4581/
Reported-by: Jeffrey Ollie
Tested-by: George Joseph
ASTERISK-24932 #close
........
Merged revisions 434113 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 434114 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434115 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Since 'core stop now' and 'core restart now' do not stop modules,
it is unsafe for most of the core to run cleanups. Originally all
cleanups used ast_register_atexit, and were only changed when it
was shown to be unsafe. ast_register_atexit is now used only when
absolutely required to prevent corruption and close child processes.
Exceptions that need to use ast_register_atexit:
* CDR: Flush records.
* res_musiconhold: Kill external applications.
* AstDB: Close the DB.
* canary_exit: Kill canary process.
ASTERISK-24142 #close
Reported by: David Brillert
ASTERISK-24683 #close
Reported by: Peter Katzmann
ASTERISK-24805 #close
Reported by: Badalian Vyacheslav
ASTERISK-24881 #close
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/4500/
Review: https://reviewboard.asterisk.org/r/4501/
........
Merged revisions 433495 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 433497 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433498 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Reverted the change to astman_send_listack() to not use the listflag
parameter and always set the value to "Start" so the start capitalization
is consistent. Unfortunately changing the case of a returned value is not
a backward compatible change so for now FAXSessions is going to have to
remain inconsistent with all of the other AMI list actions.
* Reverted the minor protocol error fix in action_getconfig() when no
requested categories are found. Each line needs to be formatted as
"Header: text".
Caught by the testsuite.
ASTERISK-24049
........
Merged revisions 430528 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430529 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Made the following AMI actions use list API calls for consistency:
Agents
BridgeInfo
BridgeList
BridgeTechnologyList
ConfbridgeLIst
ConfbridgeLIstRooms
CoreShowChannels
DAHDIShowChannels
DBGet
DeviceStateList
ExtensionStateList
FAXSessions
Hangup
IAXpeerlist
IAXpeers
IAXregistry
MeetmeList
MeetmeListRooms
MWIGet
ParkedCalls
Parkinglots
PJSIPShowEndpoint
PJSIPShowEndpoints
PJSIPShowRegistrationsInbound
PJSIPShowRegistrationsOutbound
PJSIPShowResourceLists
PJSIPShowSubscriptionsInbound
PJSIPShowSubscriptionsOutbound
PresenceStateList
PRIShowSpans
QueueStatus
QueueSummary
ShowDialPlan
SIPpeers
SIPpeerstatus
SIPshowregistry
SKINNYdevices
SKINNYlines
Status
VoicemailUsersList
* Incremented the AMI version to 2.7.0.
* Changed astman_send_listack() to not use the listflag parameter and
always set the value to "Start" so the start capitalization is consistent.
i.e., The FAXSessions used "Start" while the rest of the system used
"start". The corresponding complete event always used "Complete".
* Fixed ami_show_resource_lists() "PJSIPShowResourceLists" to output the
AMI ActionID for all of its list events.
* Fixed off-nominal AMI protocol error in manager_bridge_info(),
manager_parking_status_single_lot(), and
manager_parking_status_all_lots(). Use of astman_send_error() after
responding to the original AMI action request violates the action response
pattern by sending two responses.
* Fixed minor protocol error in action_getconfig() when no requested
categories are found. Each line needs to be formatted as "Header: text".
* Fixed off-nominal memory leak in manager_build_parked_call_string().
* Eliminated unnecessary use of RAII_VAR() in ami_subscription_detail().
ASTERISK-24049 #close
Reported by: Jonathan Rose
Review: https://reviewboard.asterisk.org/r/4315/
........
Merged revisions 430434 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430435 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Let's say you have a template T with variable VAR1 = ON and you have a
context C(T) that doesn't specify VAR1. If you read C, the effective value
of VAR1 is ON. Now you change T VAR1 to OFF and call
ast_config_text_file_save. The current behavior is that the file gets
re-written with T/VAR1=OFF but C/VAR1=ON is added. Personally, I think this
is a bug. It's preserving the effective state of C even though I didn't
specify C/VAR1 in th first place. I believe the behavior should be that if
I didn't specify C/VAR1 originally, then the effective value of C/VAR1 should
continue to follow the inherited state. Now, if I DID explicitly specify
C/VAR1, the it should be preserved even if the template changes.
Even though I think the existing behavior is a bug, it's been that way forever
so I'm not changing it. Instead, I've created ast_config_text_file_save2()
that takes a bitmask of flags, one of which is to preserve the effective context
(the current behavior). The original ast_config_text_file_save calls *2 with
the preserve flag. If you want the new behavior, call *2 directly without a
flag.
I've also updated Manager UpdateConfig with a new parameter
'PreserveEffectiveContext' whose default is 'yes'. If you want the new behavior
with UpdateConfig, set 'PreserveEffectiveContext: no'.
Tested-by: George Joseph
Review: https://reviewboard.asterisk.org/r/4297/
........
Merged revisions 430295 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430296 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The AST_FLAG_BRIDGE_DUAL_REDIRECT_WAIT flag was created to prevent bridges from
prematurely acting on orphaned channels in bridges. The problem with the AMI
redirect action was that it was setting this flag on channels based on the presence
of a PBX, not whether the channel was in a bridge. Whether a channel has a PBX
is irrelevant, so the condition has been altered to check if the channel is in a
bridge.
ASTERISK-24536 #close
Reported by Niklas Larsson
Review: https://reviewboard.asterisk.org/r/4268
........
Merged revisions 429741 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429745 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r413586 (1.8) various casts were added to silence gcc 4.10 warnings.
Those fixes included things like:
-out += sprintf(out, "%%%02X", (unsigned char) *ptr);
+out += sprintf(out, "%%%02X", (unsigned) *ptr);
That works for low ascii characters, but for the high range that yields
e.g. FFFFFFC3 when C3 is expected.
This changeset:
- fixes those casts to use the 'hh' unsigned char modifier instead
- consistently uses %02x instead of %2.2x (or other non-standard usage)
- adds a few 'h' modifiers in various places
- fixes a 'replcaes' typo
- dev/urandon typo (in 13+ patch)
Review: https://reviewboard.asterisk.org/r/4263/
ASTERISK-24619 #close
Reported by: Stefan27 (on IRC)
........
Merged revisions 429673 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 429674 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 429675 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429683 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes a race condition between the raising of test AMI events (which
drive many tests in the Asterisk Test Suite) and other AMI events. Prior to
this patch, the Stasis messages published to the test topic were not forwarded
to the AMI topic. Instead, the code in manager had a dedicated handler for test
messages that was independent of the topics forwarded to the AMI topic. This
results in no synchronization between the test messages and the rest of the
Stasis messages published out over AMI. In some test with very tight timing
constraints, this can result in out of order messages and spurious test
failures. Properly forwarding the Test Suite topic to the AMI topic ensures
that the messages are synchronized properly.
This patch does that, and moves the message handling to the Stasis definition
of the Test Suite message in test.c as well.
Review: https://reviewboard.asterisk.org/r/4221/
........
Merged revisions 428945 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 428946 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428947 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When shutting down Asterisk that has an active AMI connection, you get
several "failed to extend from %d to %d" messages because use of the
EVENT_FLAG_SHUTDOWN attempts to add all AMI permission strings to the
event.
* Created MAX_AUTH_PERM_STRING to use when creating stack based struct
ast_str variables used with the authority_to_str() and
user_authority_to_str() functions instead of a variety of magic numbers
that could be too small.
* Added a special check for EVENT_FLAG_SHUTDOWN to authority_to_str() so
it will not attempt to add all permission level strings.
Review: https://reviewboard.asterisk.org/r/4200/
........
Merged revisions 428570 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 428571 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 428572 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428573 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch provides the capability to manipulate templates and categories
with non-unique names via AMI.
Summary of changes:
GetConfig and GetConfigJSON: Added "Filter" parameter: A comma separated list
of name_regex=value_regex expressions which will cause only categories whose
variables match all expressions to be considered. The special variable name
TEMPLATES can be used to control whether templates are included. Passing
'include' as the value will include templates along with normal categories.
Passing 'restrict' as the value will restrict the operation to ONLY templates.
Not specifying a TEMPLATES expression results in the current default behavior
which is to not include templates.
UpdateConfig: NewCat now includes options for allowing duplicate category
names, indicating if the category should be created as a template, and
specifying templates the category should inherit from. The rest of the
actions now accept a filter string as defined above. If there are non-unique
category names, you can now update specific ones based on variable values.
To facilitate the new capabilities in manager, corresponding changes had to be
made to config, most notably the addition of filter criteria to many of the
APIs. In some cases it was easy to change the references to use the new
prototype but others would have required touching too many files for this
patch so a wrapper with the original prototype was created. Macros couldn't
be used in this case because it would break binary compatibility with modules
such as res_digium_phone that are linked to real symbols.
Tested-by: George Joseph
Review: https://reviewboard.asterisk.org/r/4033/
........
Merged revisions 425383 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 425384 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425385 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds the AllVariables parameter to the Status AMI action such that
if defined and set to "true", all channel variables will be reported in
the subsequent Status event(s). This parameter does not negate the
functionality of the "Variables" parameter so that global variables and
dialplan functions can be requested.
Review: https://reviewboard.asterisk.org/r/3915/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421534 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This introduces stasis.conf and a mechanism to prevent certain message
types from being published. Internally, this works by preventing the
chosen message types from being created which ensures that those
message types can never be published. This patch also adjusts message
publishers such that message payloads are not created if the related
message type is not available.
ASTERISK-23943 #close
Review: https://reviewboard.asterisk.org/r/3823/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420124 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds three new AMI commands:
* ExtensionStateList (pbx.c) - list all known extension state hints
and their current statuses. Events emitted by the list action are
equivalent to the ExtensionStatus events.
* PresenceStateList (res_manager_presencestate) - list all known
presence state values. Events emitted are generated by the stasis
message type, and hence are PresenceStateChange events.
* DeviceStateList (res_manager_devicestate) - list all known device
state values. Events emitted are generated by the stasis message
type, and hence are DeviceStateChange events.
Patch-by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3799/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419806 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ASTERISK-24124 #close
Reported by Matt Jordan
AFS-131 #close
Reported by Matt Jordan
Patches:
userevent.patch uploaded by Matt Jordan (License #6283)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419789 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the PresenceState action is executed, the nominal path fails to include
the ActionID in the successful response. This patch adds a call to
astman_start_ack, which guarantees that an ActionID (if provided) will be
sent back to the AMI client.
Unlike the Asterisk 11 and 12 patches, this patch also deprecates the
duplicate Message key in the response to the action, replacing it with the
key 'PresenceMessage'.
Review: https://reviewboard.asterisk.org/r/3776/
ASTERISK-23985 #close
........
Merged revisions 418713 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 418714 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418717 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Persistent HTTP connection support is needed due to the increased usage of
the Asterisk core HTTP transport and the frequency at which REST API calls
are going to be issued.
* Add http.conf session_keep_alive option to enable persistent
connections.
* Parse and discard optional chunked body extension information and
trailing request headers.
* Increased the maximum application/json and
application/x-www-form-urlencoded body size allowed to 4k. The previous
1k was kind of small.
* Removed a couple inlined versions of ast_http_manid_from_vars() by
calling the function. manager.c:generic_http_callback() and
res_http_post.c:http_post_callback()
* Add missing va_end() in ast_ari_response_error().
* Eliminated unnecessary RAII_VAR() use in http.c:auth_create().
ASTERISK-23552 #close
Reported by: Scott Griepentrog
Review: https://reviewboard.asterisk.org/r/3691/
........
Merged revisions 417880 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417901 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During some performance testing of Asterisk with AGI, ARI, and lots of Local
channels, we noticed that there's quite a hit in performance during channel
creation and releasing to the dialplan (ARI continue). After investigating
the performance spike that occurs during channel creation, we discovered
that we create a lot of channel snapshots that are technically unnecessary.
This includes creating snapshots during:
* AGI execution
* Returning objects for ARI commands
* During some Local channel operations
* During some dialling operations
* During variable setting
* During some bridging operations
And more.
This patch does the following:
- It removes a number of fields from channel snapshots. These fields were
rarely used, were expensive to have on the snapshot, and hurt performance.
This included formats, translation paths, Log Call ID, callgroup, pickup
group, and all channel variables. As a result, AMI Status,
"core show channel", "core show channelvar", and "pjsip show channel" were
modified to either hit the live channel or not show certain pieces of data.
While this is unfortunate, the performance gain from this patch is worth
the loss in behaviour.
- It adds a mechanism to publish a cached snapshot + blob. A large number of
publications were changed to use this, including:
- During Dial begin
- During Variable assignment (if no AMI variables are emitted - if AMI
variables are set, we have to make snapshots when a variable is changed)
- During channel pickup
- When a channel is put on hold/unhold
- When a DTMF digit is begun/ended
- When creating a bridge snapshot
- When an AOC event is raised
- During Local channel optimization/Local bridging
- When endpoint snapshots are generated
- All AGI events
- All ARI responses that return a channel
- Events in the AgentPool, MeetMe, and some in Queue
- Additionally, some extraneous channel snapshots were being made that were
unnecessary. These were removed.
- The result of ast_hashtab_hash_string is now cached in stasis_cache. This
reduces a large number of calls to ast_hashtab_hash_string, which reduced
the amount of time spent in this function in gprof by around 50%.
#ASTERISK-23811 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3568/
........
Merged revisions 416211 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@416216 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Simply establishing a TCP connection and never sending anything to the
configured HTTP port in http.conf will tie up a HTTP connection. Since
there is a maximum number of open HTTP sessions allowed at a time you can
block legitimate connections.
A similar problem exists if a HTTP request is started but never finished.
* Added http.conf session_inactivity timer option to close HTTP
connections that aren't doing anything. Defaults to 30000 ms.
* Removed the undocumented manager.conf block-sockets option. It
interferes with TCP/TLS inactivity timeouts.
* AMI and SIP TLS connections now have better authentication timeout
protection. Though I didn't remove the bizzare TLS timeout polling code
from chan_sip.
* chan_sip can now handle SSL certificate renegotiations in the middle of
a session. It couldn't do that before because the socket was non-blocking
and the SSL calls were not restarted as documented by the OpenSSL
documentation.
* Fixed an off nominal leak of the ssl struct in
handle_tcptls_connection() if the FILE stream failed to open and the SSL
certificate negotiations failed.
The patch creates a custom FILE stream handler to give the created FILE
streams inactivity timeout and timeout after a specific moment in time
capability. This approach eliminates the need for code using the FILE
stream to be redesigned to deal with the timeouts.
This patch indirectly fixes most of ASTERISK-18345 by fixing the usage of
the SSL_read/SSL_write operations.
ASTERISK-23673 #close
Reported by: Richard Mudgett
........
Merged revisions 415841 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 415854 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 415896 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@415907 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds the TCP_NODELAY option to accepted connections on the HTTP
server built into Asterisk. This option disables the Nagle algorithm
which controls queueing of outbound data and in some cases can cause
delays on receipt of response by the client due to how the Nagle
algorithm interacts with TCP delayed ACK. This option is already set on
all non-HTTP AMI connections and this change would cover standard HTTP
requests, manager HTTP connections, and ARI HTTP requests and
websockets in Asterisk 12+ along with any future use of the HTTP
server.
Review: https://reviewboard.asterisk.org/r/3466/
........
Merged revisions 412745 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 412748 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 412749 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412750 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch works around a problem with the HTTP body
being dropped from the response to a specific client
and under specific circumstances:
a) Client request comes from node.js user agent
"Shred" via use of swagger-client library.
b) Asterisk and Client are *not* on the same
host or TCP/IP stack
In testing this problem, it has been determined that
the write of the HTTP body is lost, even if the data
is written using low level write function. The only
solution found is to instruct the TCP stack with the
shutdown function to flush the last write and finish
the transmission. See review for more details.
ASTERISK-23548 #close
(closes issue ASTERISK-23548)
Reported by: Sam Galarneau
Review: https://reviewboard.asterisk.org/r/3402/
........
Merged revisions 411462 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 411463 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 411465 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411469 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix memory leak in ast_unreal_new_channels(). Made it generate the ;2
uniqueid on a stack variable instead of mallocing it.
* Made send error response to ARI and AMI requests instead of just logging
excessive uniqueid length and allowing truncation. action_originate() and
ari_channels_handle_originate_with_id().
* Fixed minor truncating uniqueid hole when generating the ;2 uniqueid
string length. Created public and internal lengths of uniqueid. The
internal length can handle a max public uniqueid plus an appended ;2.
* free() and ast_free() are NULL tolerant so they don't need a NULL test
before calling.
* Made use better struct initialization format instead of the position
dependent initialization format. Also anything not explicitly initialized
in the struct is initialized to zero by the compiler.
* Made ast_channel_internal_set_fake_ids() use the safer
ast_copy_string() instead of strncpy().
Review: https://reviewboard.asterisk.org/r/3371/
........
Merged revisions 410949 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410950 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Much needed was a way to assign id to objects on creation, and
much change was necessary to accomplish it. Channel uniqueids
and linkedids are split into separate string and creation time
components without breaking linkedid propgation. This allowed
the uniqueid to be specified by the user interface - and those
values are now carried through to channel creation, adding the
assignedids value to every function in the chain including the
channel drivers. For local channels, the second channel can be
specified or left to default to a ;2 suffix of first. In ARI,
bridge, playback, and snoop objects can also be created with a
specified uniqueid.
Along the way, the args order to allocating channels was fixed
in chan_mgcp and chan_gtalk, and linkedid is no longer lost as
masquerade occurs.
(closes issue ASTERISK-23120)
Review: https://reviewboard.asterisk.org/r/3191/
........
Merged revisions 410157 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410158 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When an 'ExtensionStatus' event was raised it included the status as a
numerical value, but did not include a text description of the status.
Added a 'StatusText' field to the event which is a string representation
of the extension status. Also added this to the 'Extension State' command
response.
(closes issue ASTERISK-23154)
Reported by: Jonathan Rose
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@406647 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Occasionally, the manager module would get an "INTERNAL_OBJ: bad magic
number" error on a "core restart gracefully" command if an AMI connection
is established.
* Added ao2_global_obj protection to the sessions global container.
* Fixed the order of unreferencing a session object in session_destroy().
* Removed unnecessary container traversals of the white/black filters
during session_destructor().
(closes issue AST-1242)
Reported by: Guenther Kelleter
Review: https://reviewboard.asterisk.org/r/3144/
........
Merged revisions 406341 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 406342 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@406343 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The per console verbose level feature as previously implemented caused a
large performance penalty. The fix required some minor incompatibilities
if the new rasterisk is used to connect to an earlier version. If the new
rasterisk connects to an older Asterisk version then the root console
verbose level is always affected by the "core set verbose" command of the
remote console even though it may appear to only affect the current
console. If an older version of rasterisk connects to the new version
then the "core set verbose" command will have no effect.
* Fixed the verbose performance by not generating a verbose message if
nothing is going to use it and then filtered any generated verbose
messages before actually sending them to the remote consoles.
* Split the "core set debug" and "core set verbose" CLI commands to remove
the per module verbose support that cannot work with the per console
verbose level.
* Added a silent option to the "core set verbose" command.
* Fixed "core set debug off" tab completion.
* Made "core show settings" list the current console verbosity in addition
to the root console verbosity.
* Changed the default verbose level of the 'verbose' setting in the
logger.conf [logfiles] section. The default is now to once again follow
the current root console level. As a result, using the AMI Command action
with "core set verbose" could again set the root console verbose level and
affect the verbose level logged.
(closes issue AST-1252)
Reported by: Guenther Kelleter
Review: https://reviewboard.asterisk.org/r/3114/
........
Merged revisions 405431 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 405432 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405436 65c4cc65-6c06-0410-ace0-fbb531ad65f3
AMI action UserEvent event response would include the action header in its
keyvalue pairs list. Adjusted the start of the header loop to skip over the
action part.
(closes issue ASTERISK-22899)
Reported by: outtolunc
Patches:
svn_manager.c.skip_action.diff.txt uploaded by outtolunc (license 5198)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404832 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ARI POST calls only accept parameters via the URL's query string.
While this works, it's atypical for HTTP API's in general, and
specifically frowned upon with RESTful API's.
This patch adds parsing for application/x-www-form-urlencoded request
bodies if they are sent in with the request. Any variables parsed this
way are prepended to the variable list supplied by the query string.
(closes issue ASTERISK-22743)
Review: https://reviewboard.asterisk.org/r/2986/
........
Merged revisions 402555 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402557 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A common idiom in Asterisk is to due something like:
for (ao2_obj = list_beginning; ao2_obj = next_item; ao2_ref(ao2_obj, -1)) {
...do stuff...
}
This is nice because it automatically takes care of the object references
for you. However, there is a pitfall here. If a break statement is in the
for loop, then the current reference is not cleaned up. In some cases, this
is on purpose, but in others there is a leak. This commit fixes the leak
cases.
........
Merged revisions 401248 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401249 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Channel snapshots have string representations of the channel's native formats.
Prior to this change, the format strings were re-created on ever channel snapshot
creation. Since channel native formats rarely change, this was very wasteful.
Now, string representations of formats may optionally be stored on the ast_format_cap
for cases where string representations may be requested frequently. When formats
are altered, the string cache is marked as invalid. When strings are requested, the
cache validity is checked. If the cache is valid, then the cached strings are copied.
If the cache is invalid, then the string cache is rebuilt and copied, and the cache
is marked as being valid again.
Review: https://reviewboard.asterisk.org/r/2879
........
Merged revisions 400356 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400363 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Sean Bright
Richard Mudgett
Mark Michelson
George Joseph
Timo Teräs
Corey Farrell
Joshua Colp
zuul
Matt Jordan
Niklas Larsson
George Joseph
pchero
Alexander Traud
Ivan Poddubny
Rodrigo Ramírez Norambuena
Gareth Palmer
Scott Griepentrog
Jonathan Rose
Walter Doekes
Kinsey Moore
Rusty Newton
Sean Bright
Kevin Harwell
Jason Parker
David M. Lee