3516 Commits (4e555437dcf20c7dc272749347c3c7cdccef66b7)

Author	SHA1	Message	Date
George Joseph	eb48e99bd4	bridge_native_rtp: Keep rtp instance refs on bridge_channel ... There have been reports of deadlocks caused by an attempt to send a frame to a channel's rtp instance after the channel has left the native bridge and been destroyed. This patch effectively causes the bridge channel to keep a reference to the glue and both the audio and video rtp instances so what gets started will get stopped. ASTERISK-26978 #close Reported-by: Ross Beer Change-Id: I9e1ac49fa4af68d64826ccccd152593cf8cdb21a	9 years ago
Torrey Searle	9fbc34d2bd	res_pjsip: Add DTMF INFO Failback mode ... The existing auto dtmf mode reverts to inband if 4733 fails to be negotiated. This patch adds a new mode auto_info which will switch to INFO instead of inband if 4733 is not available. ASTERISK-27066 #close Change-Id: Id185b11e84afd9191a2f269e8443019047765e91	9 years ago
Kevin Harwell	1f9913f272	core_local: local channel data not being properly unref'ed and unlocked ... In an earlier version of Asterisk a local channel [un]lock all functions were added in order to keep a crash from occurring when a channel hung up too early during an attended transfer. Unfortunately, when a transfer failure occurs and depending on the timing, the local channels sometime do not get properly unlocked and deref'ed after being locked and ref'ed. This happens because the underlying local channel structure gets NULLed out before unlocking. This patch reworks those [un]lock functions and makes sure the values that get locked and ref'ed later get unlocked and deref'ed. ASTERISK-27074 #close Change-Id: Ice96653e29bd9d6674ed5f95feb6b448ab148b09	9 years ago
Jenkins2	707e0e62e6	Merge "res_pjsip: New endpoint option "notify_early_inuse_ringing"" into 13	9 years ago
Alexei Gradinari	a6e4899612	res_pjsip: New endpoint option "notify_early_inuse_ringing" ... This option was added to control whether to notify dialog-info state 'early' or 'confirmed' on Ringing when already INUSE. The value "yes" is useful for some SIP phones (Cisco SPA) to be able to indicate and pick up ringing devices. ASTERISK-26919 #close Change-Id: Ie050bc30023543c7dfb4365c5be3ce58c738c711	9 years ago
Jenkins2	0b7a0681a3	Merge "res_ari: Add "module loaded" check to ari stubs" into 13	9 years ago
George Joseph	7901b9853e	res_ari: Add "module loaded" check to ari stubs ... The recent change to make the use of LOAD_DECLINE more consistent caused res_ari to unload itself before declining if the ari.conf file wasn't found. The ari stubs though still tried to use the configuration resulting in segfaults. This patch creates a new CHECK_ARI_MODULE_LOADED macro which tests to see if res_ari is actually loaded and causes the stubs to also decline if it isn't. The macro was then added to the mustache template's "load_module" function. ASTERISK-27026 #close Reported-by: Ronald Raikes Change-Id: I263d56efa628ee3c411bdcd16d49af6260c6c91d	9 years ago
Jenkins2	5fa52f0b5a	Merge "bridge: Add a deferred queue." into 13	9 years ago
Joshua Colp	e414833f6e	bridge: Add a deferred queue. ... This change adds a deferred queue to bridging. If a bridge technology determines that a frame can not be written and should be deferred it can indicate back to bridging to do so. Bridging will then requeue any deferred frames upon a new channel joining the bridge. This change has been leveraged for T.38 request negotiate control frames. Without the deferred queue there is a race condition between the bridge receiving the T.38 request negotiate and the second channel joining and being in the bridge. If the channel is not yet in the bridge then the T.38 negotiation fails. A unit test has also been added that confirms that a T.38 request negotiate control frame is deferred when no other channel is in the bridge and that it is requeued when a new channel joins the bridge. ASTERISK-26923 Change-Id: Ie05b08523f399eae579130f4a5f562a344d2e415	9 years ago
Kevin Harwell	6cdf3191d3	res_pjsip_refer/session: Calls dropped during transfer ... When doing an attended transfer it's possible for the transferer, after receiving an accepted response from Asterisk, to send a BYE to Asterisk, which can then be processed before Asterisk has time to start and/or complete the transfer process. This of course causes the transfer to not complete successfully, thus dropping the call. This patch makes it so any BYEs received from the transferer, after the REFER, that initiate a session end are deferred until the transfer is complete. This allows the channel that would have otherwise been hung up by Asterisk to remain available throughout the transfer process. ASTERISK-27053 #close Change-Id: I43586db79079457d92d71f1fd993be9a3b409d5a	9 years ago
Jenkins2	812f5b51cb	Merge "res_pjsip: Add support for returning only reachable contacts and use it." into 13	9 years ago
Joshua Colp	746c2c5745	res_pjsip: Add support for returning only reachable contacts and use it. ... This introduces the ability for PJSIP code to specify filtering flags when retrieving PJSIP contacts. The first flag for use causes the query code to only retrieve contacts that are not unreachable. This change has been leveraged by both the Dial() process and the PJSIP_DIAL_CONTACTS dialplan function so they will now only attempt calls to contacts which are not unreachable. ASTERISK-26281 Change-Id: I8233b4faa21ba3db114f5a42e946e4b191446f6c	9 years ago
Jenkins2	95b2b542f6	Merge "format: Reintroduce smoother flags" into 13	9 years ago
Joshua Colp	3d7e9375fb	Merge "res_srtp: Add support for libsrtp2" into 13	9 years ago
Jenkins2	3e8eea0325	Merge "res_pjsip: New endpoint option "refer_blind_progress"" into 13	9 years ago
Sean Bright	70e5887906	format: Reintroduce smoother flags ... In review 4843 (ASTERISK-24858), we added a hack that forced a smoother creation when sending signed linear so that the byte order was adjusted during transmission. This was needed because smoother flags were lost during the new format work that was done in Asterisk 13. Rather than rolling that same hack into res_rtp_multicast, re-introduce smoother flags so that formats can dictate their own options. Change-Id: I77b835fba0e539c6ce50014a984766f63cab2c16	9 years ago
Sean Bright	5e9cd1f20d	res_srtp: Add support for libsrtp2 ... ASTERISK-25294 #close Reported by: Tzafrir Cohen ASTERISK-26976 #close Reported by: Alex Change-Id: I789b1c3d1ed31365bbd9339fa58ef36f48833c40	9 years ago
Jenkins2	d4ccd3a6c0	Merge "asterisk: Audit locking of channel when manipulating flags." into 13	9 years ago
George Joseph	65898c3af8	unittests: Add a unit test that causes a SEGV and... ... ...that can only be run by explicitly calling it with 'test execute category /DO_NOT_RUN/ name RAISE_SEGV' This allows us to more easily test CI and debugging tools that should do certain things when asterisk coredumps. To allow this a new member was added to the ast_test_info structure named 'explicit_only'. If set by a test, the test will be skipped during a 'test execute all' or 'test execute category ...'. Change-Id: Ia3a11856aae4887df9a02b6b081cc777b36eb6ed	9 years ago
Joshua Colp	1618203964	asterisk: Audit locking of channel when manipulating flags. ... When manipulating flags on a channel the channel has to be locked to guarantee that nothing else is also manipulating the flags. This change introduces locking where necessary to guarantee this. It also adds helper functions that manipulate channel flags and lock to reduce repeated code. ASTERISK-26789 Change-Id: I489280662dba0f4c50981bfc5b5a7073fef2db10	9 years ago
Alexei Gradinari	6af2dd34af	res_pjsip: New endpoint option "refer_blind_progress" ... This option was added to turn off notifying the progress details on Blind Transfer. If this option is not set then the chan_pjsip will send NOTIFY "200 OK" immediately after "202 Accepted". Some SIP phones like Mitel/Aastra or Snom keep the line busy until receive "200 OK". ASTERISK-26333 #close Change-Id: Id606fbff2e02e967c02138457badc399144720f2	9 years ago
George Joseph	7d4a22bf2e	logger: Added logger_queue_limit to the configuration options. ... All log messages go to a queue serviced by a single thread which does all the IO. This setting controls how big that queue can get (and therefore how much memory is allocated) before new messages are discarded. The default is 1000. Should something go bezerk and log tons of messages in a tight loop, this will prevent memory escalation. When the limit is reached, a WARNING is logged to that effect and messages are discarded until the queue is empty again. At that time another WARNING will be logged with the count of discarded messages. There's no "low water mark" for this queue because the logger thread empties the entire queue and processes it in 1 batch before going back and waiting on the queue again. Implementing a low water mark would mean additional locking as the thread processes each message and it's not worth it. A "test" was added to test_logger.c but since the outcome is non-deterministic, it's really just a cli command, not a unit test. Change-Id: Ib4520c95e1ca5325dbf584c7989ce391649836d1	9 years ago
Joshua Colp	7ffd80cc04	bridge: Fix returning to dialplan when executing Bridge() from AMI. ... When using the Bridge AMI action on the same channel multiple times it was possible for the channel to return to the wrong location in the dialplan if the other party hung up. This happened because the priority of the channel was not preserved across each action invocation and it would fail to move on to the next priority in other cases. This change makes it so that the priority of a channel is preserved when taking control of it from another thread and it is incremented as appropriate such that the priority reflects where the channel should next be executed in the dialplan, not where it may or may not currently be. The Bridge AMI action was also changed to ensure that it too starts the channels at the next location in the dialplan. ASTERISK-24529 Change-Id: I52406669cf64208aef7252a65b63ade31fbf7a5a	9 years ago
Jenkins2	9bb683242c	Merge "res_pjsip_session: Add cleanup to ast_sip_session_terminate" into 13	9 years ago
George Joseph	c5b9ed20fd	res_pjsip_session: Add cleanup to ast_sip_session_terminate ... If you use ast_request to create a PJSIP channel but then hang it up without causing a transaction to be sent, the session will never be destroyed. This is due ot the fact that it's pjproject that triggers the session cleanup when the transaction ends. app_chanisavail was doing this to get more granular channel state and it's also possible for this to happen via ARI. * ast_sip_session_terminate was modified to explicitly call the cleanup tasks and unreference session if the invite state is NULL AND invite_tsx is NULL (meaning we never sent a transaction). * chan_pjsip/hangup was modified to bump session before it calls ast_sip_session_terminate to insure that session stays valid while it does its own cleanup. * Added test events to session_destructor for a future testsuite test. ASTERISK-26908 #close Reported-by: Richard Mudgett Change-Id: I52daf6f757184e5544c261f64f6fe9602c4680a9	9 years ago
Kevin Harwell	4d3b4fbf22	vector: defaults and indexes ... Added an pre-defined integer vector declaration. This makes integer vectors easier to declare and pass around. Also, added the ability to default a vector up to a given size with a default value. Lastly, added functionality that returns the "nth" index of a matching value. Also, updated a unit test to test these changes. Change-Id: Iaf4b51b2540eda57cb43f67aa59cf1d96cdbcaa5	9 years ago
Sean Bright	cea3742c54	core: Use eventfd for alert pipes on Linux when possible ... The primary win of switching to eventfd when possible is that it only uses a single file descriptor while pipe() will use two. This means for each bridge channel we're reducing the number of required file descriptors by 1, and - if you're using timerfd - we also now have 1 less file descriptor per Asterisk channel. The API is not ideal (passing int arrays), but this is the cleanest approach I could come up with to maintain API/ABI. I've also removed what I believe to be an erroneous code block that checked the non-blocking flag on the pipe ends for each read. If the file descriptor is 'losing' its non-blocking mode, it is because of a bug somewhere else in our code. In my testing I haven't seen any measurable difference in performance. Change-Id: Iff0fb1573e7f7a187d5211ddc60aa8f3da3edb1d	9 years ago
Joshua Colp	5e2a8ef94a	Merge "modules: change module LOAD_FAILUREs to LOAD_DECLINES" into 13	9 years ago
George Joseph	f882ca2572	modules: change module LOAD_FAILUREs to LOAD_DECLINES ... In all non-pbx modules, AST_MODULE_LOAD_FAILURE has been changed to AST_MODULE_LOAD_DECLINE. This prevents asterisk from exiting if a module can't be loaded. If the user wishes to retain the FAILURE behavior for a specific module, they can use the "require" or "preload-require" keyword in modules.conf. A new API was added to logger: ast_is_logger_initialized(). This allows asterisk.c/check_init() to print to the error log once the logger subsystem is ready instead of just to stdout. If something does fail before the logger is initialized, we now print to stderr instead of stdout. Change-Id: I5f4b50623d9b5a6cb7c5624a8c5c1274c13b2b25	9 years ago
Torrey Searle	d8967ff2c0	strings.h: Avoid overflows in the string hash functions ... On 2's compliment machines abs(INT_MIN) behavior is undefined and results in a negative value still being returnd. This results in negative hash codes that can result in crashes. ASTERISK-26528 #close Change-Id: Idff550145ca2133792a61a2e212b4a3e82c6517b	9 years ago
George Joseph	4e6e069491	pjproject_bundled: Add 3 upstream patches ... 0035-r5572-svn-backport-dialog-transaction-deadlock.patch 0036-r5573-svn-backport-ua-pjsua-transaction-deadlock.patch 0037-r5576-svn-backport-session-timer-crash.patch Also removed the progress bar from wget download to stdout. ASTERISK-26905 #close Reported-by: Ross Beer Change-Id: I268fb3cf71a3bb24283ff0d24bd8b03239d81256	9 years ago
Corey Farrell	c701550803	Forward declare 'struct ast_json' in asterisk.h ... The ast_json structure is used in many Asterisk headers and is often the only part of json.h used. This adds a forward declaration to asterisk.h and removes the include of json.h from many headers. The declaration has been left in endpoints.h and stasis.h to avoid problems with source files that use ast_json functions without directly including json.h. ari.h continues to include json.h as it uses enum ast_json_encoding_format. Change-Id: Id766aabce6bed56626d27e8d29f559b5e687b769	9 years ago
zuul	f040eb0502	Merge "CEL: Remove header declarations of non-existant functions." into 13	9 years ago
Sean Bright	c9648f4690	astobj2: Prevent potential deadlocks with ao2_global_obj_release ... The ao2_global_obj_release() function holds an exclusive lock on the global object while it is being dereferenced. Any destructors that run during this time that call ao2_global_obj_ref() will deadlock because a read lock is required. Instead, we make the global object inaccessible inside of the write lock and only dereference it once we have released the lock. This allows the affected destructors to fail gracefully. While this doesn't completely solve the referenced issue (the error message about not being able to create an IQ continues to be shown) it does solve the backtrace spew that accompanied it. ASTERISK-21009 #close Reported by: Marcello Ceschia Change-Id: Idf40ae136b5070dba22cb576ea8414fbc9939385	9 years ago
Corey Farrell	3c23ebdef4	CEL: Remove header declarations of non-existant functions. ... ast_cel_alloc and ast_cel_destroy do not exist in code, remove them from the headers. Change-Id: I99ce848e2e109e7d61771559f559b9e57973e45c	9 years ago
Sean Bright	79a2c26c03	core: Remove embedded module support ... This has not worked for some time and is no longer actively maintained. Change-Id: I5110b0db69c152761b58fa025cb0a53b0e544d99	9 years ago
Kevin Harwell	f1b34e6eb4	AMI: Updated version ... Updated the AMI version for the following reason (see CHANGES for more details): The 'PJSIPShowEndpoint' command's response event of 'IdentifyDetail' now contains a new optional parameter, 'MatchHeader'. Change-Id: I9aeac4decc89f9b464b3f026e97c7ef1acc79242	9 years ago
zuul	b79e67ba47	Merge "res_pjsip_session: Enable RFC3578 overlap dialing support." into 13	9 years ago
Richard Begg	398e5ec16c	res_pjsip_session: Enable RFC3578 overlap dialing support. ... Support for RFC3578 overlap dialling (i.e. 484 Response to partially matched destinations) as currently provided by chan_sip is missing from res_pjsip. This patch adds a new endpoint attribute (allow_overlap) [defaults to yes] which when set to yes enables 484 responses to partial destination matches rather than the current 404. ASTERISK-26864 Change-Id: Iea444da3ee7c7d4f1fde1d01d138a3d7b0fe40f6	9 years ago
zuul	d7ba743329	Merge "autochan/mixmonitor/chanspy: Fix unsafe channel locking and references." into 13	9 years ago
Sean Bright	218f618095	res_hep: Capture actual transport type in use ... Rather than hard-coding UDP, allow consumers of the HEP API to specify which protocol is in use. Update the PJSIP provider to pass in the current protocol type. ASTERISK-26850 #close Change-Id: I54bbb0a001cfe4c6a87ad4b6f2014af233349978	9 years ago
Sean Bright	38cebc73a3	thread safety: Don't use getprotobyname() ... POSIX does not require getprotobyname() to be thread safe and some implementations use static memory which causes issues when multiple threads are used. Further, our usage of it today is just to ultimately get IPPROTO_TCP for calls to setsockopt(). So instead we just use IPPROTO_TCP directly. Change-Id: I2e14e58674808f7ce99b2f5e900d0f90d0d8da48	9 years ago
George Joseph	9b756662a8	res_pjsip: Symmetric transports ... A new transport parameter 'symmetric_transport' has been added. When a request from a dynamic contact comes in on a transport with this option set to 'yes', the transport name will be saved and used for subsequent outgoing requests like OPTIONS, NOTIFY and INVITE. It's saved as a contact uri parameter named 'x-ast-txp' and will display with the contact uri in CLI, AMI, and ARI output. On the outgoing request, if a transport wasn't explicitly set on the endpoint AND the request URI is not a hostname, the saved transport will be used and the 'x-ast-txp' parameter stripped from the outgoing packet. * config_transport was modified to accept and store the new parameter. * config_transport/transport_apply was updated to store the transport name in the pjsip_transport->info field using the pjsip_transport->pool on UDP transports. * A 'multihomed_on_rx_message' function was added to pjsip_message_ip_updater that, for incoming requests, retrieves the transport name from pjsip_transport->info and retrieves the transport. If transport->symmetric_transport is set, an 'x-ast-txp' uri parameter containing the transport name is added to the incoming Contact header. * An 'ast_sip_get_transport_name' function was added to res_pjsip. It takes an ast_sip_endpoint and a pjsip_sip_uri and returns a transport name if endpoint->transport is set or if there's an 'x-ast-txp' parameter on the uri and the uri host is an ipv4 or ipv6 address. Otherwise it returns NULL. * An 'ast_sip_dlg_set_transport' function was added to res_pjsip which takes an ast_sip_endpoint, a pjsip_dialog, and an optional pjsip_tpselector. It calls ast_sip_get_transport_name() and if a non-NULL is returned, sets the selector and sets the transport on the dialog. If a selector was passed in, it's updated. * res_pjsip/ast_sip_create_dialog_uac and ast_sip_create_dialog_uas were modified to call ast_sip_dlg_set_transport() instead of their original logic. * res_pjsip/create_out_of_dialog_request was modified to call ast_sip_get_transport_name() and pjsip_tx_data_set_transport() instead of its original logic. * Existing transport logic was removed from endpt_send_request since that can only be called after a create_out_of_dialog_request. * res_pjsip/ast_sip_create_rdata was converted to a wrapper around a new 'ast_sip_create_rdata_with_contact' function which allows a contact_uri to be specified in addition to the existing parameters. (See below) * res_pjsip_pubsub/internal_pjsip_evsub_send_request was eliminated since all it did was transport selection and that is now done in ast_sip_create_dialog_uac and ast_sip_create_dialog_uas. * 'contact_uri' was added to subscription_persistence. This was necessary because although the parsed rdata contact header has the x-ast-txp parameter added (if appropriate), subscription_persistence_update stores the raw packet which doesn't have it. subscription_persistence_recreate was then updated to call ast_sip_create_rdata_with_contact with the persisted contact_uri so the recreated subscription has the correct transport info to send the NOTIFYs. * res_pjsip_session/internal_pjsip_inv_send_msg was eliminated since all it did was transport selection and that is now done in ast_sip_create_dialog_uac. * pjsip_message_ip_updater/multihomed_on_tx_message was updated to remove all traces of the x-ast-txp parameter from the outgoing headers. NOTE: This change does NOT modify the behavior of permanent contacts specified on an aor. To do so would require that the permanent contact's contact uri be updated with the x-ast-txp parameter and the aor sorcery object updated. If we need to persue this, we need to think about cloning permanent contacts into the same store as the dynamic ones on an aor load so they can be updated without disturbing the originally configured value. You CAN add the x-ast-txp parameter to a permanent contact's uri but it would be much simpler to just set endpoint->transport. Change-Id: I4ee1f51473da32ca54b877cd158523efcef9655f	9 years ago
Richard Mudgett	adad6020be	autochan/mixmonitor/chanspy: Fix unsafe channel locking and references. ... Dereferencing struct ast_autochan.chan without first calling ast_autochan_channel_lock() is unsafe because the pointer could change at any time due to a masquerade. Unfortunately, ast_autochan_channel_lock() itself uses struct ast_autochan.chan unsafely and can result in a deadlock if the original channel happens to get destroyed after a masquerade in addition to the pointer getting changed. The problem is more likely to happen with v11 and earlier because masquerades are used to optimize out local channels on those versions. However, it could still happen on newer versions if the channel is executing a dialplan application when the channel is transferred or redirected. In this situation a masquerade still must be used. * Added a lock to struct ast_autochan to safely be able to use ast_autochan.chan while trying to get the channel lock in ast_autochan_channel_lock(). The locking order is the channel lock then the autochan lock. Locking in the other direction requires deadlock avoidance. * Fix unsafe ast_autochan.chan usages in app_mixmonitor.c. * Fix unsafe ast_autochan.chan usages in app_chanspy.c. * app_chanspy.c: Removed unused autochan parameter from next_channel(). ASTERISK-26867 Change-Id: Id29dd22bc0f369b44e23ca423d2f3657187cc592	9 years ago
Mark Michelson	7bc69753bc	Add rtcp-mux support ... This commit adds support for RFC 5761: Multiplexing RTP Data and Control Packets on a Single Port. Specifically, it enables the feature when using chan_pjsip. A new option, "rtcp_mux" has been added to endpoint configuration in pjsip.conf. If set, then Asterisk will attempt to use rtcp-mux with whatever it communicates with. Asterisk follows the rules set forth in RFC 5761 with regards to falling back to standard RTCP behavior if the far end does not indicate support for rtcp-mux. The lion's share of the changes in this commit are in res_rtp_asterisk.c. This is because it was pretty much hard wired to have an RTP and an RTCP transport. The strategy used here is that when rtcp-mux is enabled, the current RTCP transport and its trappings (such as DTLS SSL session) are freed, and the RTCP session instead just mooches off the RTP session. This leads to a lot of specialized if statements throughout. ASTERISK-26732 #close Reported by Dan Jenkins Change-Id: If46a93ba1282418d2803e3fd7869374da8b77ab5	9 years ago
Joshua Colp	eac818801b	bridge_native_rtp: Handle case where channel joins already suspended. ... The bridge_native_rtp module did not properly handle the case where a smart bridge operation occurs while a channel is suspended. In this scenario the module would incorrectly set up local or remote RTP bridging despite the media having to flow through Asterisk. The remote endpoint would see two media streams and experience wonky audio. The module has been changed so that it ensures both channels are not suspended when performing the native RTP bridging and this requirement has been documented in the bridge technology. ASTERISK-26781 Change-Id: Id4022d73ace837d4a293106445e3ade10dbc7c7c	9 years ago
zuul	a3584c6834	Merge "res_pjsip: Record the serializer earlier on the tdata." into 13	9 years ago
Sean Bright	5eb7875243	realtime: Centralize some common realtime backend code ... All of the realtime backends create artificial ast_categorys to pass back into the core as query results. These categories have no filename or line number information associated with them and the backends differ slightly on how they create them. So create a couple helper macros to help make things more consistent. Also updated the call sites to remove redundant error messages about memory allocation failure. Note that res_config_ldap sets the category filename to the 'table name' but that is not read by anything in the core, so I've dropped it. Change-Id: I3a1fd91e0c807dea1ce3b643b0a6fe5be9002897	9 years ago
Richard Mudgett	eb9ae4f7cb	res_pjsip: Record the serializer earlier on the tdata. ... When PJPROJECT needs to do a DNS resolution and there is not a cached entry available, the SIP request message goes out on the PJSIP monitor thread instead of the original serializer thread. Thus when the response comes back it does not get processed by the original sending serializer. This patch records the serializer on tdata before passing a request message to PJPROJECT where it can in Asterisk code. There are several places in PJPROJECT for outbound registration and publishing support that would need to record the serializer. Unfortunately, without replacing the PJPROJECT DNS resolver as was done in v14 we cannot fix those without modifying PJPROJECT. Even if we backported the DNS resolver from v14, the outbound registration refresh timer does not go out on a serializer thread but the PJSIP monitor thread. Fortunately, Asterisk's outbound publish support doesn't use the auto refresh timer that would also not go out under the serializer thread. This patch is v13 only. ASTERISK-26669 ASTERISK-26738 Change-Id: I9997b9ed6dbcebd2c37d6a67dc6dcee9c78914a4	9 years ago
George Joseph	be77b845d9	res_pjsip_pubsub: Correctly implement persisted subscriptions ... This patch fixes 2 original issues and more that those 2 exposed. * When we send a NOTIFY, and the client either doesn't respond or responds with a non OK, pjproject only calls our pubsub_on_evsub_state callback, no others. Since pubsub_on_evsub_state (which does the sub_tree cleanup) does not expect to be called back without the other callbacks being called first, it just returns leaving the sub_tree orphaned. Now pubsub_on_evsub_state checks the event for PJSIP_EVENT_TSX_STATE which is what pjproject will set to tell us that it was the transaction that timed out or failed and not the subscription itself timing our or being terminated by the client. If is TSX_STATE, pubsub_on_evsub_state now does the proper cleanup regardless of the state of the subscription. * When a client renews a subscription, we don't update the persisted subscription with the new expires timestamp. This causes subscription_persistence_recreate to prune the subscription if/when asterisk restarts. Now, pubsub_on_rx_refresh calls subscription_persistence_update to apply the new expires timestamp. This exposed other issues however... * When creating a dialog from rdata (which sub_persistence_recreate does from the packet buffer) there must NOT be a tag on the To header (which there will be when a client refreshes a subscription). If there is one, pjsip_dlg_create_uas will fail. To address this, subscription_persistence_update now accepts a flag that indicates that the original packet buffer must not be updated. New subscribes don't set the flag and renews do. This makes sure that when the rdata is recreated on asterisk startup, it's done from the original subscribe packet which won't have the tag on To. * When creating a dialog from rdata, we were setting the dialog's remote (SUBSCRIBE) cseq to be the same as the local (NOTIFY) cseq. When the client tried to resubscribe after a restart with the correct cseq, we'd reject the request with an Invalid CSeq error. * The acts of creating a dialog and evsub by themselves when recreating a subscription does NOT restart pjproject's subscription timer. The result was that even if we did correctly recreate the subscription, we never removed it if the client happened to go away or send a non-OK response to a NOTIFY. However, there is no pjproject function exposed to just set the timer on an evsub that wasn't created by an incoming subscribe request. To address this, we create our own timer using ast_sip_schedule_task. This timer is used only for re-establishing subscriptions after a restart. An earlier approach was to add support for setting pjproject's timer (via a pjproject patch) and while that patch is still included here, we don't use that call at the moment. While addressing these issues, additional debugging was added and some existing messages made more useful. A few formatting changes were also made to 'pjsip show scheduled tasks' to make displaying the subscription timers a little more friendly. ASTERISK-26696 ASTERISK-26756 Change-Id: I8c605fc1e3923f466a74db087d5ab6f90abce68e	9 years ago