1887 Commits (4decf4e4925d0b0d48acedb7370809976972c10c)

Author	SHA1	Message	Date
Alexander Traud	e819cf7826	res_rtp_asterisk: Correct default in sample configuration file. ... With Asterisk 12 (commit 866d968), the default of "icesupport" changed to - "yes" in the module "res_rtp_asterisk" and - "no" in the module "chan_sip". The latter was reflected in the sample configuration file for "sip.conf". The former did not make it into "rtp.conf.sample". ASTERISK-20643 Change-Id: I2a2e0a900455d0767a99ea576e30adc6d7608a36	8 years ago
Richard Mudgett	8dd9a79e6e	features.conf.sample: Clarify ActivatedBy documentation wording. ... Change-Id: Id2899331fe05d1909a862ea879742879d086bc64	8 years ago
George Joseph	062a4390ac	ast_coredumper: Add ability to use directory other than /tmp ... The OUTPUTDIR environment variable can now be set either in the environment itself or in ast_debug_tools.conf. If set, it's used for all work products instead of /tmp. Also added the --tarball-config option that includes the contents of /etc/asterisk when either --tarball-coredumps or --tarball-results are used. Change-Id: I66b2553319df61caea5b313d084f51978f730b4c	8 years ago
Richard Mudgett	507d9b5f9e	core: Add cache_media_frames debugging option. ... The media frame cache gets in the way of finding use after free errors of media frames. Tools like valgrind and MALLOC_DEBUG don't know when a frame is released because it gets put into the cache instead of being freed. * Added the "cache_media_frames" option to asterisk.conf. Disabling the option helps track down media frame mismanagement when using valgrind or MALLOC_DEBUG. The cache gets in the way of determining if the frame is used after free and who freed it. NOTE: This option has no effect when Asterisk is compiled with the LOW_MEMORY compile time option enabled because the cache code does not exist. To disable the media frame cache simply disable the cache_media_frames option in asterisk.conf and restart Asterisk. Sample asterisk.conf setting: [options] cache_media_frames=no ASTERISK-27413 Change-Id: I0ab2ce0f4547cccf2eb214901835c2d951b78c00	8 years ago
Joshua Colp	7385d1e017	res_pjsip: Add 'ip' as a valid option to 'identify_by' on endpoint. ... When the identify_by option on an endpoint is set to ip it will only be identified using the res_pjsip_endpoint_identifier_ip module. This ensures that it is not mistakenly matched using the username of the From header. To ensure behavior has not changed the default has been changed to "username,ip" for the identify_by option. ASTERISK-27206 Change-Id: I2170b86a7f7e221b4f00bf14aa1ef1ac5b050bbd	8 years ago
Jenkins2	5a8c148dcf	Merge "res_pjsip_registrar.c: Update remove_existing AOR contact handling." into 13	8 years ago
Richard Mudgett	d388c18abf	res_pjsip_registrar.c: Update remove_existing AOR contact handling. ... When "rewrite_contact" is enabled, the "max_contacts" count option can block re-registrations because the source port from the endpoint can be random. When the re-registration is blocked, the endpoint may give up re-registering and require manual intervention. * The "remove_existing" option now allows a registration to succeed by displacing any existing contacts that now exceed the "max_contacts" count. Any removed contacts are the next to expire. The behaviour change is beneficial when "rewrite_contact" is enabled and "max_contacts" is greater than one. The removed contact is likely the old contact created by "rewrite_contact" that the device is refreshing. ASTERISK-27192 Change-Id: I64c107a10b70db1697d17136051ae6bf22b5314b	8 years ago
Sean Bright	6b16fa12c8	res_config_sqlite: Don't enable SQLite CDRs when running 'make samples' ... Change-Id: I65a5190b2732b2246d67472db70dd37db64ddad4	8 years ago
Jenkins2	b6e1b13de4	Merge "res_pjsip: Filter out non SIP(S) requests" into 13	8 years ago
George Joseph	63900374fa	res_pjsip: Filter out non SIP(S) requests ... Incoming requests with non sip(s) URIs in the Request, To, From or Contact URIs are now rejected with PJSIP_SC_UNSUPPORTED_URI_SCHEME (416). This is performed in pjsip_message_filter (formerly pjsip_message_ip_updater) and is done at pjproject's "TRANSPORT" layer before a request can even reach the distributor. URIs read by res_pjsip_outbound_publish from pjsip.conf are now also checked for both length and sip(s) scheme. Those URIs read by outbound registration and aor were already being checked for scheme but their error messages needed to be updated to include scheme failure as well as length failure. Change-Id: Ibb2f9f1d2dc7549da562af4cbd9156c44ffdd460	8 years ago
George Joseph	ed2a4ee81e	res_pjsip: Add handling for incoming unsolicited MWI NOTIFY ... A new endpoint parameter "incoming_mwi_mailbox" allows Asterisk to receive unsolicited MWI NOTIFY requests and make them available to other modules via the stasis message bus. res_pjsip_pubsub has a new handler "pubsub_on_rx_mwi_notify_request" that parses a simple-message-summary body and, if endpoint->incoming_mwi_account is set, calls ast_publish_mwi_state with the voice-message counts from the message. Change-Id: I08bae3d16e77af48fcccc2c936acce8fc0ef0f3c	8 years ago
Corey Farrell	04ee3eb774	AST-2017-006: Fix app_minivm application MinivmNotify command injection ... An admin can configure app_minivm with an externnotify program to be run when a voicemail is received. The app_minivm application MinivmNotify uses ast_safe_system() for this purpose which is vulnerable to command injection since the Caller-ID name and number values given to externnotify can come from an external untrusted source. * Add ast_safe_execvp() function. This gives modules the ability to run external commands with greater safety compared to ast_safe_system(). Specifically when some parameters are filled by untrusted sources the new function does not allow malicious input to break argument encoding. This may be of particular concern where CALLERID(name) or CALLERID(num) may be used as a parameter to a script run by ast_safe_system() which could potentially allow arbitrary command execution. * Changed app_minivm.c:run_externnotify() to use the new ast_safe_execvp() instead of ast_safe_system() to avoid command injection. * Document code injection potential from untrusted data sources for other shell commands that are under user control. ASTERISK-27103 Change-Id: I7552472247a84cde24e1358aaf64af160107aef1	8 years ago
Andrey Egorov	54e3ac402f	res_xmpp: Google OAuth 2.0 protocol support for XMPP / Motif ... Add ability to use tokens instead of passwords according to Google OAuth 2.0 protocol. ASTERISK-27169 Reported by: Andrey Egorov Tested by: Andrey Egorov Change-Id: I07f7052a502457ab55010a4d3686653b60f4c8db	8 years ago
Jenkins2	a5e73ad1f8	Merge "core: Add PARSE_TIMELEN support to ast_parse_arg and ACO." into 13	8 years ago
Corey Farrell	df49ad2528	core: Add PARSE_TIMELEN support to ast_parse_arg and ACO. ... This adds support for parsing timelen values from config files. This includes support for all flags which apply to PARSE_INT32. Support for this parser is added to ACO via the OPT_TIMELEN_T option type. Fixes an issue where extra characters provided to ast_app_parse_timelen were ignored, they now cause an error. Testing is included. ASTERISK-27117 #close Change-Id: I6b333feca7e3f83b4ef5bf2636fc0fd613742554	8 years ago
Sean Bright	6d0ff310c6	basic-pbx: Remove res_pjsip_multihomed from sample config ... ASTERISK-27127 #close Reported by: HZMI8gkCvPpom0tM Change-Id: I2b0c54570d58156e37166ac536728af3b6c01789	8 years ago
George Joseph	4e555437dc	res_musiconhold: Add kill_escalation_delay, kill_method to class ... By default, when res_musiconhold reloads or unloads, it sends a HUP signal to custom applications (and all descendants), waits 100ms, then sends a TERM signal, waits 100ms, then finally sends a KILL signal. An application which is interacting with an external device and/or spawns children of its own may not be able to exit cleanly in the default times, expecially if sent a KILL signal, or if it's children are getting signals directly from res_musiconhoild. * To allow extra time, the 'kill_escalation_delay' class option can be used to set the number of milliseconds res_musiconhold waits before escalating kill signals, with the default being the current 100ms. * To control to whom the signals are sent, the "kill_method" class option can be set to "process_group" (the default, existing behavior), which sends signals to the application and its descendants directly, or "process" which sends signals only to the application itself. Change-Id: Iff70a1a9405685a9021a68416830c0db5158603b	8 years ago
George Joseph	40490768cc	Merge "chan_pjsip: Fix ability to send UPDATE on COLP" into 13	8 years ago
George Joseph	6bd7c0f37c	chan_pjsip: Fix ability to send UPDATE on COLP ... When connected_line_method is "invite", we're supposed to determine if the client can support UPDATE and if it can, send UPDATE instead of INVITE to avoid the SDP renegotiation. Not only was pjproject not setting the PJSIP_INV_SUPPORT_UPDATE flag, we were testing that invite_tsx wasn't NULL which isn't always the case. * Updated chan_pjsip/update_connected_line_information to drop the requirement that invite_tsx isn't NULL. * Submitted patch to pjproject sip_inv.c that sets the PJSIP_INV_SUPPORT_UPDATE flag correctly. * Updated pjsip.conf.sample to clarify what happens when "invite" is specified. ASTERISK-27095 Change-Id: Ic2381b3567b8052c616d96fbe79564c530e81560	8 years ago
Jenkins2	997c11235e	Merge "app_voicemail: IMAP connection control" into 13	8 years ago
Rodrigo Ramírez Norambuena	cecf6540dc	cdr: fix mistake spelling of a word for Unanswered. ... Change-Id: I7a610bef369924523a445c7e849ee88cc45dc5df	8 years ago
Alexei Gradinari	8f356192d1	app_voicemail: IMAP connection control ... A new global option "imap_poll_logout" was added to specify whether need to disconnect from the IMAP server after polling of mailboxes. ASTERISK-27068 #close Closing IMAP connection after loading mailbox from voicemail.conf ASTERISK-24052 #close Change-Id: Ib7558ba04516240a32b65f42e9be64372a0ae12a	8 years ago
Jenkins2	707e0e62e6	Merge "res_pjsip: New endpoint option "notify_early_inuse_ringing"" into 13	8 years ago
Alexei Gradinari	a6e4899612	res_pjsip: New endpoint option "notify_early_inuse_ringing" ... This option was added to control whether to notify dialog-info state 'early' or 'confirmed' on Ringing when already INUSE. The value "yes" is useful for some SIP phones (Cisco SPA) to be able to indicate and pick up ringing devices. ASTERISK-26919 #close Change-Id: Ie050bc30023543c7dfb4365c5be3ce58c738c711	8 years ago
Sean Bright	da3312457e	codecs.conf.sample: Fix max_bandwidth speling error ... Reported by Sylvain Boily via asterisk-dev mailing list. Change-Id: Idc7623f335aea3e144dd369ba383b9a757480a9d	8 years ago
Jenkins2	3e8eea0325	Merge "res_pjsip: New endpoint option "refer_blind_progress"" into 13	8 years ago
Sean Bright	971a401ce9	sip.conf.sample: Clarify where DTLS settings are permitted ... ASTERISK-25101 #close Change-Id: I09a97793e5577b4422d0ae883fadb3f0d86725cc	8 years ago
Rodrigo Ramírez Norambuena	5da91c65be	Fix spelling queues.conf.sample file ... Change-Id: Ie1c2d83af66f27a449da09a68d987e0992627fee	8 years ago
Alexei Gradinari	6af2dd34af	res_pjsip: New endpoint option "refer_blind_progress" ... This option was added to turn off notifying the progress details on Blind Transfer. If this option is not set then the chan_pjsip will send NOTIFY "200 OK" immediately after "202 Accepted". Some SIP phones like Mitel/Aastra or Snom keep the line busy until receive "200 OK". ASTERISK-26333 #close Change-Id: Id606fbff2e02e967c02138457badc399144720f2	8 years ago
Jenkins2	6383d9214a	Merge "res_hep_rtcp: Provide chan_sip Call-ID for RTCP messages." into 13	8 years ago
Joshua Colp	10a49ab362	res_hep_rtcp: Provide chan_sip Call-ID for RTCP messages. ... This change adds the required logic to allow the SIP Call-ID to be placed into the HEP RTCP traffic if the chan_sip module is used. In cases where the option is enabled but the channel is not either SIP or PJSIP then the code will fallback to the channel name as done previously. Based on the change on Nir's branch at: team/nirs/hep-chan-sip-support ASTERISK-26427 Change-Id: I09ffa5f6e2fdfd99ee999650ba4e0a7aad6dc40d	8 years ago
George Joseph	7d4a22bf2e	logger: Added logger_queue_limit to the configuration options. ... All log messages go to a queue serviced by a single thread which does all the IO. This setting controls how big that queue can get (and therefore how much memory is allocated) before new messages are discarded. The default is 1000. Should something go bezerk and log tons of messages in a tight loop, this will prevent memory escalation. When the limit is reached, a WARNING is logged to that effect and messages are discarded until the queue is empty again. At that time another WARNING will be logged with the count of discarded messages. There's no "low water mark" for this queue because the logger thread empties the entire queue and processes it in 1 batch before going back and waiting on the queue again. Implementing a low water mark would mean additional locking as the thread processes each message and it's not worth it. A "test" was added to test_logger.c but since the outcome is non-deterministic, it's really just a cli command, not a unit test. Change-Id: Ib4520c95e1ca5325dbf584c7989ce391649836d1	8 years ago
Richard Mudgett	cd80af508e	res_rtp_asterisk.c: Add stun_blacklist option ... Added the stun_blacklist option to rtp.conf. Some multihomed servers have IP interfaces that cannot reach the STUN server specified by stunaddr. Blacklist those interface subnets from trying to send a STUN packet to find the external IP address. Attempting to send the STUN packet needlessly delays processing incoming and outgoing SIP INVITEs because we will wait for a response that can never come until we give up on the response. Multiple subnets may be listed. ASTERISK-26890 #close Change-Id: I3ff4f729e787f00c3e6e670fe6435acce38be342	8 years ago
Walter Doekes	bbbd262ec0	samples: Undo removal of include from canonicalize-app-names commit. ... This include was accidentally removed in changeset Ia79aea64de89531362e993e34230c2044a70aa93. My bad. Change-Id: I1d716c7f9590b4e97909fb8bca1f2ed9bd0e4082	8 years ago
zuul	b82f58d2bf	Merge "pjsip: Add Alembic for PUBLISH support." into 13	8 years ago
zuul	293f9d39b7	Merge "samples: Canonicalize app names in extensions.conf.sample." into 13	8 years ago
Joshua Colp	b3f4a6365e	pjsip: Add Alembic for PUBLISH support. ... This change adds database tables for the PUBLISH support so it can be configured using realtime. A minor fix to the res_pjsip_publish_asterisk module was done so that it read the sorcery configuration from the correct section. Finally the sample configuration files have been updated. ASTERISK-26928 Change-Id: I81991ae5c75af98d247f7eacd1c0b0a763675952	8 years ago
George Joseph	d2a33cdedc	sample_config: Add samples for pubsub to pjsip.conf.sample ... Added: * outbound-publish * resource_list * inbound-publication * asterisk-publication Change-Id: I65043a896c35483f30a92d30b5b118359af7ba5a	8 years ago
Walter Doekes	ab9d2fc86d	samples: Canonicalize app names in extensions.conf.sample. ... This takes care of warnings by ossobv/asterisklint. Change-Id: Ia79aea64de89531362e993e34230c2044a70aa93	8 years ago
George Joseph	0667febf3d	Merge "res_pjsip_config_wizard: Add 2 new parameters to help with proxy config" into 13	8 years ago
George Joseph	a827892ff7	res_pjsip_config_wizard: Add 2 new parameters to help with proxy config ... Two new parameters have been added to the pjsip config wizard. * Setting 'sends_line_with_registrations' to true will cause the wizard to skip the creation of an identify object to match incoming request to the endpoint and instead add the line and endpoint parameters to the outbound registration object. * Setting 'outbound_proxy' is a shortcut for adding individual endpoint/outbound_proxy, aor/outbound_proxy and registration/outbound_proxy parameters. Change-Id: I678e5f80765734c056620528a6d40d82736ceeb0	8 years ago
Sean Bright	2c28f7a922	res_musiconhold: Document the 'format' option ... ASTERISK-26086 #close Reported by: Jens Bürger Change-Id: I6aab666c0bf01fd0c64d7a5bcb22fa7f5d41335e	8 years ago
Richard Begg	398e5ec16c	res_pjsip_session: Enable RFC3578 overlap dialing support. ... Support for RFC3578 overlap dialling (i.e. 484 Response to partially matched destinations) as currently provided by chan_sip is missing from res_pjsip. This patch adds a new endpoint attribute (allow_overlap) [defaults to yes] which when set to yes enables 484 responses to partial destination matches rather than the current 404. ASTERISK-26864 Change-Id: Iea444da3ee7c7d4f1fde1d01d138a3d7b0fe40f6	8 years ago
Sean Bright	8721d0bf1b	chan_sip: Add rtcp-mux support ... ASTERISK-26846 #close Change-Id: I541a1602ff55ab73684e9f8002edb9e0e745d639	8 years ago
George Joseph	9b756662a8	res_pjsip: Symmetric transports ... A new transport parameter 'symmetric_transport' has been added. When a request from a dynamic contact comes in on a transport with this option set to 'yes', the transport name will be saved and used for subsequent outgoing requests like OPTIONS, NOTIFY and INVITE. It's saved as a contact uri parameter named 'x-ast-txp' and will display with the contact uri in CLI, AMI, and ARI output. On the outgoing request, if a transport wasn't explicitly set on the endpoint AND the request URI is not a hostname, the saved transport will be used and the 'x-ast-txp' parameter stripped from the outgoing packet. * config_transport was modified to accept and store the new parameter. * config_transport/transport_apply was updated to store the transport name in the pjsip_transport->info field using the pjsip_transport->pool on UDP transports. * A 'multihomed_on_rx_message' function was added to pjsip_message_ip_updater that, for incoming requests, retrieves the transport name from pjsip_transport->info and retrieves the transport. If transport->symmetric_transport is set, an 'x-ast-txp' uri parameter containing the transport name is added to the incoming Contact header. * An 'ast_sip_get_transport_name' function was added to res_pjsip. It takes an ast_sip_endpoint and a pjsip_sip_uri and returns a transport name if endpoint->transport is set or if there's an 'x-ast-txp' parameter on the uri and the uri host is an ipv4 or ipv6 address. Otherwise it returns NULL. * An 'ast_sip_dlg_set_transport' function was added to res_pjsip which takes an ast_sip_endpoint, a pjsip_dialog, and an optional pjsip_tpselector. It calls ast_sip_get_transport_name() and if a non-NULL is returned, sets the selector and sets the transport on the dialog. If a selector was passed in, it's updated. * res_pjsip/ast_sip_create_dialog_uac and ast_sip_create_dialog_uas were modified to call ast_sip_dlg_set_transport() instead of their original logic. * res_pjsip/create_out_of_dialog_request was modified to call ast_sip_get_transport_name() and pjsip_tx_data_set_transport() instead of its original logic. * Existing transport logic was removed from endpt_send_request since that can only be called after a create_out_of_dialog_request. * res_pjsip/ast_sip_create_rdata was converted to a wrapper around a new 'ast_sip_create_rdata_with_contact' function which allows a contact_uri to be specified in addition to the existing parameters. (See below) * res_pjsip_pubsub/internal_pjsip_evsub_send_request was eliminated since all it did was transport selection and that is now done in ast_sip_create_dialog_uac and ast_sip_create_dialog_uas. * 'contact_uri' was added to subscription_persistence. This was necessary because although the parsed rdata contact header has the x-ast-txp parameter added (if appropriate), subscription_persistence_update stores the raw packet which doesn't have it. subscription_persistence_recreate was then updated to call ast_sip_create_rdata_with_contact with the persisted contact_uri so the recreated subscription has the correct transport info to send the NOTIFYs. * res_pjsip_session/internal_pjsip_inv_send_msg was eliminated since all it did was transport selection and that is now done in ast_sip_create_dialog_uac. * pjsip_message_ip_updater/multihomed_on_tx_message was updated to remove all traces of the x-ast-txp parameter from the outgoing headers. NOTE: This change does NOT modify the behavior of permanent contacts specified on an aor. To do so would require that the permanent contact's contact uri be updated with the x-ast-txp parameter and the aor sorcery object updated. If we need to persue this, we need to think about cloning permanent contacts into the same store as the dynamic ones on an aor load so they can be updated without disturbing the originally configured value. You CAN add the x-ast-txp parameter to a permanent contact's uri but it would be much simpler to just set endpoint->transport. Change-Id: I4ee1f51473da32ca54b877cd158523efcef9655f	8 years ago
Matt Jordan	51985565ef	configs/samples/hep.conf.sample: Clarify how the HEP stack works ... This patch updates the documenation in hep.conf.sample to better specify how the various HEP modules interact. ASTERISK-26717 #close Change-Id: I337fb742a89e3ec5edc7fc7a7a0295218d841124	8 years ago
Daniel Journo	bc6eeab822	app_voicemail: Cannot set fromstring on a per-mailbox basis ... * apps/app_voicemail.c fromstring field added to mailbox which will override the global fromstring if set. ASTERISK-24562 #close Change-Id: I5e90e3a1ec2b2d5340b49a0db825e4bbb158b2fe	8 years ago
zuul	59a00786e8	Merge "config: Improve documentation and behavior of outbound_proxy option." into 13	8 years ago
Tzafrir Cohen	5b34b751a0	pjsip.conf.sample: user_agent: not a specific version ... Use the description of useragent from sip.conf here. ASTERISK-26825 #close Change-Id: I5b33a4aaa0ae1d793289d05e3bc09521affbf755	8 years ago
Joshua Colp	d49af061bc	config: Improve documentation and behavior of outbound_proxy option. ... This change updates the documentation for the outbound_proxy option to ensure it is consistently stated that a full SIP URI must be provided for the option. The res_pjsip_outbound_registration module has also been changed so that the provided outbound_proxy value is checked to ensure it is a URI and if not an error is output stating so. ASTERISK-26782 Change-Id: I6c239a32274846fd44e65b44ad9bf6373479b593	8 years ago