3238 Commits (47d508e9115042d93bf5a7dab025bceecaabd2e1)

Author	SHA1	Message	Date
Joshua Colp	efa0868295	Merge "res/res_pjsip_location: Delete contact_status object when contact is deleted" into 13	10 years ago
Matt Jordan	84b1475674	Merge "Remove res_jabber file that was left behind." into 13	10 years ago
Corey Farrell	f2efbb5d75	Remove res_jabber file that was left behind. ... Change-Id: I9d88fac0394d5bbaff0900a2ee911c4e4478846b	10 years ago
Matt Jordan	0a9941de9d	res/res_pjsip_location: Delete contact_status object when contact is deleted ... In 450579e908, a change was made that removed the deletion of the 'contact_status' object when a 'contact' object is deleted in sorcery. This unfortunately means that the 'contact_status' object persists, even when something has explicitly removed a contact. The result is that the state of the contact will not be regenerated if that contact is re-created, and the stale state will be reported/used for that contact. It also results in no ContactStatusChanged events being generated for either ARI or AMI. This patch restores the deletion logic that was removed. Doing so now results in the expected events being generated again. Change-Id: I28789a112e845072308b5b34522690e3faf58f07	10 years ago
Kevin Harwell	1e24a0ca8a	res_rtp_asterisk: rtp->ice check not wrapped in HAVE_PJPROJECT ifdef ... Change-Id: I19b49112e1b630bd04e859f14ccf96f8ebd6b151	10 years ago
Dade Brandon	965a0eee46	res_rtp_asterisk: Resolve further timing issues with DTLS negotiation ... Resolves an edge case dtls negotiation delay for certain networks which somehow manage to drop the rtcp side's packet when these are both sent ast_rtp_remote_address_set, causing it to have to time-out and restart the handshake. Move dtls pending bio flush in to it's own function, and call it from ast_rtp_on_ice_complete, when we're rtp->ice, rather than when ast_rtp_remote_address_set. Keep the existing flush from the recent change to res_rtp_remote_address_set if ice is not being used. ASTERISK-25614 #close Reported-by: XenCALL Tested by: XenCALL Change-Id: Ie2caedbdee1783159f375589b6fd3845c8577ba5	10 years ago
Joshua Colp	e652a786d6	Merge "json: Audit ast_json_* usage for thread safety." into 13	10 years ago
Joshua Colp	62e49a7e20	Merge "res_sorcery_memory_cache: Add support for a full backend cache." into 13	10 years ago
Joshua Colp	59d5bb0613	res_sorcery_memory_cache: Add support for a full backend cache. ... This change introduces the configuration option 'full_backend_cache' which changes the cache to be a full mirror of the backend instead of a per-object cache. This allows all sorcery retrieval operations to be carried out against it and is useful for object types which are used in a "retrieve all" or "retrieve some" pattern. ASTERISK-25625 #close Change-Id: Ie2993487e9c19de563413ad5561c7403b48caab5	10 years ago
Joshua Colp	a9d6fc571d	json: Audit ast_json_* usage for thread safety. ... The JSON library Asterisk uses, jansson, is not thread safe for us in a few ways. To help with this wrappers for JSON object reference count increasing and decreasing were added which use a global lock to ensure they don't clobber over each other. This does not extend to reference count manipulation within the jansson library itself. This means you can't safely use the object borrowing specifier (O) in ast_json_pack and you can't share JSON instances between objects. This change removes uses of the O specifier and replaces them with the o specifier and an explicit ast_json_ref. Some cases of instance sharing have also been removed. ASTERISK-25601 #close Change-Id: I06550d8b0cc1bfeb56cab580a4e608ae4f1ec7d1	10 years ago
server-pandora	24ae124e4f	res_rtp_asterisk.c: Fix DTLS negotiation delays. ... - Trigger pending DTLS packets to send out, once the RTP instance's remote address is set. - Avoids locking the DTLS structure unnecessarily by only doing this if DTLS is passive. - Add DTLS locks around the structurally sensitive calls in the SSL portion of __rtp_recvfrom, since dtls_srtp_check_pending does not lock inside of itself, and we're dealing with the SSL BIO in at least two threads. WebRTC channels may receive a DTLS handshake before ast_rtp_remote_address_set is called, which causes there to be a pending response to send out. Previous to 1ad827, this was handled by calling dtls_srtp_check_pending on receipt of any RTP packet - a STUN or RTP packet could trigger the pending handshake response. Since that was rightfully removed, whenever the DTLS handshake is received before the remote address is set, we would have to wait until another SSL packet arrives. As of Chrome M47's optimizations to their handshake process, WebRTC conversations between Chrome M47+ and Asterisk, where Asterisk is passive, experience a 1 second delay without this patch, because the SSL handshake is received before ICE negotation stores the remote_address, and the next SSL packet isn't received until after a 1 second timeout in Chrome, which causes a new handshake request. ASTERISK-25614 #close Change-Id: I547f1be7e302dbf71f6553dd8cbc0657b1d0b908	10 years ago
George Joseph	5b867fa904	pjsip/config_transport: Check pjproject version at runtime for async ops ... pjproject < 2.5.0 will segfault on a tls transport if async_operations is greater than 1. A runtime version check has been added to throw an error if the version is < 2.5.0 and async_operations > 1. To assist in the check, a new api "ast_compare_versions" was added to utils which compares 2 major.minor.patch.extra version strings. ASTERISK-25615 #close Change-Id: I8e88bb49cbcfbca88d9de705496d6f6a8c938a98 Reported-by: George Joseph Tested-by: George Joseph	10 years ago
Joshua Colp	c344fb02f4	Merge "res_pjsip: Add existence and readablity checks for tls related files" into 13	10 years ago
tcambron	cd119ed4a2	res_chan_stats: Fix bug to send correct statistics to StatsD ... Fixed a bug that originally would show a negative number of active calls occuring in Asterisk. A gauge is persistent so incrementing and decrementing it results in a more consistent performance. Also changed to the call to StatsD to use ast_statsd_log_string() so that a "+" could be sent to StatsD. ASTERISK-25619 #close Change-Id: Iaaeff5c4c6a46535366b4d16ea0ed0ee75ab2ee7	10 years ago
George Joseph	21962dad93	res_pjsip: Add existence and readablity checks for tls related files ... Both transport and endpoint now check for the existence and readability of tls certificate and key files before passing them on to pjproject. This will cause the object to not load rather than waiting for pjproject to discover that there's a problem when a session is attempted. NOTE: chan_sip also uses ast_rtp_dtls_cfg_parse but it's located in build_peer which is gigantic and I didn't want to disturb it. Error messages will emit but it won't interrupt chan_sip loading. ASTERISK-25618 #close Change-Id: Ie43f2c1d653ac1fda6a6f6faecb7c2ebadaf47c9 Reported-by: George Joseph Tested-by: George Joseph	10 years ago
George Joseph	e03582a1c2	res_pjsip/config_transport: Prevent async_operations > 1 when protocol = tls ... See ASTERISK-25615. If the transport protocol is tls and async_operations > 1, pjproject will segfault if more than one operation is attempted on the same socket. Until this is fixed upstream, a check has been added to throw an error if a tls transport config has async_operations set to > 1. ASTERISK-25615 Change-Id: I76b9a5b2a5a0054fe71ca5851e635f2dca7685a6 Reported-by: George Joseph Tested-by: George Joseph	10 years ago
George Joseph	450579e908	res_pjsip/contacts/statsd: Make contact lifecycle events more consistent ... It will never be perfect or even pretty, mostly because of the differences between static and dynamic contacts. Created: Can't use the contact or contact_status alloc functions because the objects come and go regardless of the actual state. Can't use the contact_apply_handler, ast_sip_location_add_contact or a sorcery created handler because they only get called for dynamic contacts. Similarly, permanent_uri_handler only gets called for static contacts. So, Matt had it right. :) ast_res_pjsip_find_or_create_contact_status is the only place it can go and not have duplicated code. Both permanent_uri_handler and contact_apply_handler call find_or_create. Removed: Can't use the destructors for the same reason as above. The only place to put this is in persistent_endpoint_contact_deleted_observer which I believe is the "correct" place but even that will handle only dynamic contacts. This doesn't called on shutdown however. There is no hook to use for static contacts that may be removed because of a config change while asterisk is in operation. I moved the cleanup of contact_status from ast_sip_location_delete_contact to the handler as well. Status Change and RTT: Although they worked fine where they were (in update_contact_status) I moved them to persistent_endpoint_contact_status_observer to make it more consistent with removed. There was logic there already to detect a state change. Finally, fixed a nit in permanent_uri_handler rmudgett reported eralier. ASTERISK-25608 #close Change-Id: I4b56e7dfc3be3baaaf6f1eac5b2068a0b79e357d Reported-by: George Joseph Tested-by: George Joseph	10 years ago
Matt Jordan	9c0aaf0609	Merge "res_format_attr_vp8: In SDP, forward max-fr and max-fs for video-codec VP8." into 13	10 years ago
Matt Jordan	ffb0643467	Merge "res_format_attr_opus: Update to latest RFC 7587." into 13	10 years ago
Alexander Traud	5a18193dc0	res_format_attr_vp8: In SDP, forward max-fr and max-fs for video-codec VP8. ... ASTERISK-25584 #close Change-Id: Iae00071b4ff1ae76f24995aeac4d00284fd14f91	10 years ago
Alexander Traud	3e2178c05e	res_format_attr_opus: Update to latest RFC 7587. ... Beside that, the format-attribute module sends only non-default values in the line fmtp, now. This avoids unnecessary overhead in SDP messages. Furthermore, previously the parameter stereo was not parsed when being the first parameter. ASTERISK-25583 #close Change-Id: Iae85ba3e5960bfd5d51cf65bcffad00dd4875a73	10 years ago
Joshua Colp	cfb146e055	Merge "res_pjsip: Use a MD5 hash for static Contact IDs" into 13	10 years ago
Joshua Colp	59134eb7cb	Merge "res_pjsip: Update logging to show contact->uri in messages" into 13	10 years ago
George Joseph	9184fbeb34	res_pjsip: Use a MD5 hash for static Contact IDs ... When 90d9a70789 was merged, it mostly tested dynamic contacts created as a result of registering a PJSIP endpoint. Contacts generated in this fashion typically have a long alphanumeric string as their object identifier, which maps reasonably well for StatsD. Unfortunately, this doesn't work in the general case. StatsD treats both '.' and ':' characters as special characters. In particular, having a ':' appear in the middle of a StatsD metric will result in the metric being rejected. This causes some obvious issues with SIP URIs. The StatsD API should not be responsible for escaping the metric name passed to it. The metric is treated as a single long string, and it would be challenging to know what to escape in the string passed to the function. Likewise, we don't want to escape the metric in PJSIP, as that involves overhead that is wasted when either res_statsd isn't loaded or enabled. This patch takes an alternative approach. The Contact ID has been changed to be "aor@@uri_hash" instead of "aor@@uri". This (a) won't contain any of the aforementioned special characters, (b) can be done on Contact creation, which has minimal impact on run-time performance, and (c) also conforms to an earlier commit that changed the ID for dynamic contacts. The downside of this is that StatsD users will have to map SHA1 hashes back to the Contacts that are emitting the statistics. To that end, the CLI commands have been updated to include the first 10 characters of the MD5 hash, which should be enough to match what is shown in Graphite (or some other StatsD backend). ASTERISK-25595 #close Change-Id: Ic674a3307280365b4a45864a3571c295b48a01e2 Reported-by: Matt Jordan Tested-by: George Joseph	10 years ago
George Joseph	ed9134282e	res_pjsip: Update logging to show contact->uri in messages ... An earlier commit changed the id of dynamic contacts to contain a hash instead of the uri. This patch updates status change logging to show the aor/uri instead of the id. This required adding the aor id to contact and contact_status and adding uri to contact_status. The aor id gets added to contact and contact_status in their allocators and the uri gets added to contact_status in pjsip_options when the contact_status is created or updated. ASTERISK-25598 #close Reported-by: George Joseph Tested-by: George Joseph Change-Id: I56cbec1d2ddbe8461367dd8b6da8a6f47f6fe511	10 years ago
Richard Mudgett	bb0b60619d	res_sorcery_memory_cache.c: Fix off nominal ref leak. ... Change-Id: If83d63cf11cbc6df9b15251848b01feb570ade49	10 years ago
Kevin Harwell	45efbf8503	fastagi: record file closed after sending result ... The fastagi record-file testsuite test sometimes fails reporting an empty recorded file. This was happening because Asterisk was sending the agi result notification prior to actually closing the file and the data, being buffered, had not been written to the file yet when the test attempts to check the file size. This patch makes it so the record file stream is closed prior to sending the agi result notification. ASTERISK-25593 #close Change-Id: I6b2b3be3ae37f7c7b18e672c419a89b3b8513cde	10 years ago
Matt Jordan	e96604c902	Merge "Fixed some typos" into 13	10 years ago
David M. Lee	59881fbb99	Fixed some typos ... Fixes some minor typos in the CHANGES file, plus an embarrasing typo in the StatsD API. Change-Id: I9ca4858c64a4a07d2643b81baa64baebb27a4eb7	10 years ago
Corey Farrell	b75f587d15	res_pjsip_notify: Fix CLI usage info ... The usage info for 'pjsip send notify' previously referenced the chan_sip configuration sip_notify.conf. Fix this to reference the correct configuration pjsip_notify.conf. ASTERISK-25590 #close Change-Id: I3898271a8e8a8b1db201741e790ebe2c6bf5cdea	10 years ago
Mark Michelson	ba7665b070	Merge "res_sorcery_realtime.c: Fix crash from NULL sorcery object type." into 13	10 years ago
Richard Mudgett	fc45f4040d	res_sorcery_realtime.c: Fix crash from NULL sorcery object type. ... If the sorcery object type is not found a NULL is returned. Unfortunately, sorcery_realtime_filter_objectset() will crash after complaining about not finding the object type and saying to expect errors. * Use ao2_cleanup() instead of ao2_ref() to prevent the crash. ASTERISK-25165 Reported by Corey Farrell Change-Id: Ic3b64453ea3058cb68d5c26d97d4fe7b8eea2e97	10 years ago
Matt Jordan	7e4d948397	Merge "chan_pjsip: Handle T.38 faxes with direct media bridges" into 13	10 years ago
Matt Jordan	25332911fe	Merge "res/res_endpoint_stats: Add module to emit endpoint StatsD statistics" into 13	10 years ago
Matt Jordan	6a7cb60a47	Merge "res_pjsip/pjsip_options: Add StatsD statistics for PJSIP contacts" into 13	10 years ago
Matt Jordan	16437667eb	Merge "res/res_pjsip_outbound_registration: Add registration statistics for StatsD" into 13	10 years ago
Matt Jordan	001b7f482b	Merge "res_statsd: Add functions that support variable arguments" into 13	10 years ago
Matt Jordan	0f88f909ec	Merge "StatsD: Add res_statsd compatibility" into 13	10 years ago
Matt Jordan	4875e5ac32	chan_pjsip: Handle T.38 faxes with direct media bridges ... When a channel is in a direct media bridge, a re-INVITE may arrive that forces Asterisk to re-negotiate the media to a T.38 fax. When this occurs, the bridge must change its technology to a simple bridge, and re-INVITE the media back to Asterisk. Generally, this logic mostly already exists in Asterisk. However, prior to this patch, there were a few bugs: (1) The T.38 framehook currently prevents a channel capable of T.38 faxes from ever entering into a direct media bridge. This applies even when the only media being passed over the channel is audio. This patch fixes this bug by having the framehook specify that it defers caring about any frame type. This allows the channels to enter into a direct media bridge, which will be broken when a re-INVITE is received. (2) When a re-INVITE is received, nothing instructed the bridging layer to re-inspect the allowed bridging technology. This now occurs when either a re-INVITE is received from a peer, or when a response is received from the far end (that is, when the T.38 state changes to either T38_PEER_REINVITE or T38_LOCAL_REINVITE). (3) chan_pjsip needs to do a small amount of work to prevent a direct media bridge from being chosen when a T.38 session is in progress. When a T.38 session supplement has a t38 datastore - which is added when we detect we should start thinking about T.38 on a channel - we now refuse a native RTP bridge. (4) When a BYE request is received, we don't terminate the T.38 session. If the other side of a T.38 fax survives the hangup (due to the 'g' flag in Dial, for example), we don't currently re-INVITE the media on the other channel back to audio. This patch now has res_pjsip_t38 intercept BYE requests and inform the far side that the T.38 session is terminated. This naturally causes the correct re-INVITEs to be sent. ASTERISK-25582 Change-Id: Iabd6aa578e633d16e6b9f342091264e4324a79eb	10 years ago
Joshua Colp	6dd8b67216	Merge "res/res_pjsip_t38: Add debug statements" into 13	10 years ago
Matt Jordan	aa8f1b04b6	Merge "res_pjsip_outbound_registration.c: Be tolerant of short registration timeouts." into 13	10 years ago
Matt Jordan	2b94d9a10d	res/res_pjsip_t38: Add debug statements ... This patch adds some debug statements to res_pjsip_t38. These statements help to determine which SDP negotiation callbacks are being executed, and, when a particular callback exits, why a callback may not have applied its logic to the local or remote SDP. Change-Id: I61b3fb9183b7ebbb5da8e9f48b59a5d9d7042d77	10 years ago
Mark Michelson	6fcd361540	Merge "res_pjsip_outbound_registration.c: Fix 423 response handling." into 13	10 years ago
Joshua Colp	bdc7845a43	Merge "res_format_attr_h264: Do not reset string buffer." into 13	10 years ago
Matt Jordan	d27aac0a9d	res/res_endpoint_stats: Add module to emit endpoint StatsD statistics ... This patch adds a module that emits StatsD statistics about Asterisk endpoints. This includes: * A GUAGE statistic for endpoint states, tracking how many endpoints are in a particular state. * A GUAGE statistic for each endpoint, counting the number of channels currently associated with an endpoint. ASTERISK-25572 Change-Id: If7e1333c5aeda8d136850b30c2101c0ee1c97305	10 years ago
Matt Jordan	90d9a70789	res_pjsip/pjsip_options: Add StatsD statistics for PJSIP contacts ... This patch adds the ability to send StatsD statistics related to the state of PJSIP contacts. This includes: * A GUAGE statistic measuring the count of contacts in a particular state. This measures how many contacts are reachable, unreachable, etc. * The RTT time for each contact, if those contacts are qualified. This provides StatsD engines useful time-based data about each contact. ASTERISK-25571 Change-Id: Ib8378d73afedfc622be0643b87c542557e0b332c	10 years ago
Matt Jordan	75097a0955	res/res_pjsip_outbound_registration: Add registration statistics for StatsD ... This patch adds outbound registration statistics for StatsD. This includes the following: * A GUAGE metric for the overall count of outbound registrations. * A GUAGE metric for each state an outbound registration can be in. As the outbound registrations change state, the overall count of how many outbound registrations are in the particular state is changed. These statistics are particularly useful for systems with a large number of SIP trunks, and where measuring the change in state of the trunks is useful for monitoring. ASTERISK-25571 Change-Id: Iba6ff248f5d1c1e01acbb63e9f0da1901692eb37	10 years ago
Matt Jordan	8f71263e72	res/res_pjsip_outbound_registration: Apply configuration on object type load ... When Asterisk is configured to use a dynamic sorcery backend (such as res_sorcery_astdb) with 'registration' objects, it will fail to create the internal state objects associated with the registration objects on module load. This is due to nothing actually querying for the specific objects and calling their sorcery apply handler during module load. This patch fixes that by calling get_registrations in the sorcery observer's object_type_loaded handler. Doing this causes the sorcery backends to be asked for the current state of all registration objects, which causes the apply handler to be called and the internal run-time state to be created. ASTERISK-25575 #close Change-Id: Ie9306e797098c6d4da7bcf4a5434a15891508b23	10 years ago
Alexander Traud	1aa552b2a2	res_format_attr_h264: Do not reset string buffer. ... When no parameter is present, Asterisk does not generate the line fmtp, as expected. However, because a buffer was reset, even rtpmap and fmtp of previous media codecs got removed. Now, Asterisk does not reset other codecs in case of no parameter for H.264. ASTERISK-25573 #close Change-Id: I93811331f4a28c45418a9e14ee46c0debd47a286	10 years ago
Matt Jordan	3354b325c6	res_statsd: Add functions that support variable arguments ... Often, the metric names of statistics we are generating for StatsD have some dynamic component to them. This can be the name of a particular resource, or some internal status label in Asterisk. With the current set of functions, callers of the statsd API must first build the metric name themselves, then pass this to the API functions. This results in a large amount of boilerplate code and usage of either fixed length static buffers or dynamic memory allocation, neither of which is desireable. This patch adds two new functions to the StatsD API that support a printf style format specifier for constructing the metric name. A dynamic string, allocated in threadstorage, is used to build the metric name. This eases the burden on users of the StatsD API. Change-Id: If533c72d1afa26d807508ea48b4d8c7b32f414ea	10 years ago