105 Commits (4603e246091d779e539c211274fd31a7e2773808)

Author	SHA1	Message	Date
George Joseph	7debdd285c	res_pjsip_pubsub: Prune subs with reliable transports at startup ... In an earlier release, inbound registrations on a reliable transport were pruned on Asterisk restart since the TCP connection would have been torn down and become unusable when Asterisk stopped. This same process is now also applied to inbound subscriptions. Also fixed issues in res_pjsip_registrar where it wasn't handling the monitoring correctly when multiple registrations came in over the same transport. To accomplish this, the pjsip_transport_event feature needed to be refactored to allow multiple monitors (multiple subcriptions or registrations from the same endpoint) to exist on the same transport. Since this changed the API, any external modules that may have used the transport monitor feature (highly unlikey) will need to be changed. ASTERISK-27612 Reported by: Ross Beer Change-Id: Iee87cf4eb9b7b2b93d5739a72af52d6ca8fbbe36	8 years ago
Richard Mudgett	f35960d55b	res_pjsip: Split type=identify to IP address and SIP header matching priorities ... The type=identify endpoint identification method can match by IP address and by SIP header. However, the SIP header matching has limited usefulness because you cannot specify the SIP header matching priority relative to the IP address matching. All the matching happens at the same priority and the order of evaluating the identify sections is indeterminate. e.g., If you had two type=identify sections where one matches by IP address for endpoint alice and the other matches by SIP header for endpoint bob then you couldn't predict which endpoint is matched when a request comes in that matches both. * Extract the SIP header matching criteria into its own "header" endpoint identification method so the user can specify the relative priority of the SIP header and the IP address matching criteria in the global endpoint_identifier_order option. The "ip" endpoint identification method now only matches by IP address. ASTERISK-27491 Change-Id: I9df142a575b7e1e3471b7cda5d3ea156cef08095	8 years ago
Sean Bright	ce3d56920b	Remove as much trailing whitespace as possible. ... Change-Id: I873c1c6d00f447269bd841494459efccdd2c19c0	8 years ago
Joshua Colp	7385d1e017	res_pjsip: Add 'ip' as a valid option to 'identify_by' on endpoint. ... When the identify_by option on an endpoint is set to ip it will only be identified using the res_pjsip_endpoint_identifier_ip module. This ensures that it is not mistakenly matched using the username of the From header. To ensure behavior has not changed the default has been changed to "username,ip" for the identify_by option. ASTERISK-27206 Change-Id: I2170b86a7f7e221b4f00bf14aa1ef1ac5b050bbd	8 years ago
Jenkins2	df7211421e	Merge "res_pjsip: Add handling for incoming unsolicited MWI NOTIFY" into 13	8 years ago
George Joseph	ed2a4ee81e	res_pjsip: Add handling for incoming unsolicited MWI NOTIFY ... A new endpoint parameter "incoming_mwi_mailbox" allows Asterisk to receive unsolicited MWI NOTIFY requests and make them available to other modules via the stasis message bus. res_pjsip_pubsub has a new handler "pubsub_on_rx_mwi_notify_request" that parses a simple-message-summary body and, if endpoint->incoming_mwi_account is set, calls ast_publish_mwi_state with the voice-message counts from the message. Change-Id: I08bae3d16e77af48fcccc2c936acce8fc0ef0f3c	8 years ago
Jenkins2	1aef4fe9df	Merge "alembic: Fix typo in add_auto_info_to_endpoint_dtmf_mode" into 13	8 years ago
George Joseph	5ff2d06aa6	alembic: Fix typo in add_auto_info_to_endpoint_dtmf_mode ... The downgrade function was missing "_v2" at the end of the alter column type. Change-Id: Iaa9bcef48d6f3590ce07a61342d8e66f00263d8e	8 years ago
Florian Floimair	ad606844be	alembic: Add support for MS-SQL ... MS-SQL has no native Enum-type support and therefore needs to work with constraints. Since these constraints need unique names the suggested approach referenced in the following alembic documentation has been applied: http://bit.ly/2x9r8pb ASTERISK-27255 #close Change-Id: I4a399ba3eed41a33ce8cb294968ad340221580ee	8 years ago
Joshua Colp	9a366d2424	Merge "alembic: Fix enum creation for dtls_fingerprint" into 13	8 years ago
George Joseph	15ddc9acb3	alembic: Fix enum creation for dtls_fingerprint ... Change-Id: Ic061c5066a146616a68376881c7e4cf6d6e7e7db	8 years ago
Florian Floimair	2370469645	alembic: fix erroneous commit for add_prune_on_boot ... Added include for postgresql ENUM type and redefined values in the same way as in the other migration scripts. ASTERISK-27254 #close Change-Id: Id667304cdf3891b1c2f7d35fab3e2a84026159fa	8 years ago
Florian Floimair	bf178a0f4f	alembic: Add dtls_fingerprint column in ps_endpoints table ... The ps_endpoints table was missing the dtls_fingerprint column introduced with commit adba2a8d7f. ASTERISK-27168 #close Change-Id: I9cb5006f7f50718b5239919562773adabb334cfd	8 years ago
Richard Mudgett	07d026b4cd	res_pjsip: Remove ephemeral registered contacts on transport shutdown. ... The fix for the issue is broken up into three parts. This is part two which handles the server side of REGISTER requests when rewrite_contact is enabled. Any registered reliable transport contact becomes invalid when the transport connection becomes disconnected. * Monitor the rewrite_contact's reliable transport REGISTER contact for shutdown. If it is shutdown then the contact must be removed because it is no longer valid. Otherwise, when the client attempts to re-REGISTER it may be blocked because the invalid contact is there. Also if we try to send a call to the endpoint using the invalid contact then the endpoint is not likely to see the request. The endpoint either won't be listening on that port for new connections or a NAT/firewall will block it. * Prune any rewrite_contact's registered reliable transport contacts on boot. The reliable transport no longer exists so the contact is invalid. * Websockets always rewrite the REGISTER contact address and the transport needs to be monitored for shutdown. * Made the websocket transport set a unique name since that is what we use as the ao2 container key. Otherwise, we would not know which transport we find when one of them shuts down. The names are also used for PJPROJECT debug logging. * Made the websocket transport post the PJSIP_TP_STATE_CONNECTED state event. Now the global keep_alive_interval option, initially idle shutdown timer, and the server REGISTER contact monitor can work on wetsocket transports. * Made the websocket transport set the PJSIP_TP_DIR_INCOMING direction. Now initially idle websockets will automatically shutdown. ASTERISK-27147 Change-Id: I397a5e7d18476830f7ffe1726adf9ee6c15964f4	8 years ago
George Joseph	379fe65831	Fix alembic branches ... Change-Id: I04f607f084bda9b1b7f626e8e9735c37dc751187	8 years ago
Torrey Searle	9fbc34d2bd	res_pjsip: Add DTMF INFO Failback mode ... The existing auto dtmf mode reverts to inband if 4733 fails to be negotiated. This patch adds a new mode auto_info which will switch to INFO instead of inband if 4733 is not available. ASTERISK-27066 #close Change-Id: Id185b11e84afd9191a2f269e8443019047765e91	8 years ago
Alexei Gradinari	a6e4899612	res_pjsip: New endpoint option "notify_early_inuse_ringing" ... This option was added to control whether to notify dialog-info state 'early' or 'confirmed' on Ringing when already INUSE. The value "yes" is useful for some SIP phones (Cisco SPA) to be able to indicate and pick up ringing devices. ASTERISK-26919 #close Change-Id: Ie050bc30023543c7dfb4365c5be3ce58c738c711	8 years ago
Alexei Gradinari	6af2dd34af	res_pjsip: New endpoint option "refer_blind_progress" ... This option was added to turn off notifying the progress details on Blind Transfer. If this option is not set then the chan_pjsip will send NOTIFY "200 OK" immediately after "202 Accepted". Some SIP phones like Mitel/Aastra or Snom keep the line busy until receive "200 OK". ASTERISK-26333 #close Change-Id: Id606fbff2e02e967c02138457badc399144720f2	9 years ago
Joshua Colp	c09b9dba90	alembic: Add table for 'resource_list' PJSIP RLS type. ... This change adds an Alembic migration which adds a ps_resource_list table that can contain resource_list RLS configuration objects. ASTERISK-26929 Change-Id: I7c888fafc67b3e87012de974f71ca7a5b8b1ec05	9 years ago
Joshua Colp	b3f4a6365e	pjsip: Add Alembic for PUBLISH support. ... This change adds database tables for the PUBLISH support so it can be configured using realtime. A minor fix to the res_pjsip_publish_asterisk module was done so that it read the sorcery configuration from the correct section. Finally the sample configuration files have been updated. ASTERISK-26928 Change-Id: I81991ae5c75af98d247f7eacd1c0b0a763675952	9 years ago
Sean Bright	864dda07f3	alembic: Turn off execute bit on non-executable python scripts ... Change-Id: I744c986da4a38aeff8c00837eb89de7841fbc86c	9 years ago
Richard Begg	398e5ec16c	res_pjsip_session: Enable RFC3578 overlap dialing support. ... Support for RFC3578 overlap dialling (i.e. 484 Response to partially matched destinations) as currently provided by chan_sip is missing from res_pjsip. This patch adds a new endpoint attribute (allow_overlap) [defaults to yes] which when set to yes enables 484 responses to partial destination matches rather than the current 404. ASTERISK-26864 Change-Id: Iea444da3ee7c7d4f1fde1d01d138a3d7b0fe40f6	9 years ago
George Joseph	9b756662a8	res_pjsip: Symmetric transports ... A new transport parameter 'symmetric_transport' has been added. When a request from a dynamic contact comes in on a transport with this option set to 'yes', the transport name will be saved and used for subsequent outgoing requests like OPTIONS, NOTIFY and INVITE. It's saved as a contact uri parameter named 'x-ast-txp' and will display with the contact uri in CLI, AMI, and ARI output. On the outgoing request, if a transport wasn't explicitly set on the endpoint AND the request URI is not a hostname, the saved transport will be used and the 'x-ast-txp' parameter stripped from the outgoing packet. * config_transport was modified to accept and store the new parameter. * config_transport/transport_apply was updated to store the transport name in the pjsip_transport->info field using the pjsip_transport->pool on UDP transports. * A 'multihomed_on_rx_message' function was added to pjsip_message_ip_updater that, for incoming requests, retrieves the transport name from pjsip_transport->info and retrieves the transport. If transport->symmetric_transport is set, an 'x-ast-txp' uri parameter containing the transport name is added to the incoming Contact header. * An 'ast_sip_get_transport_name' function was added to res_pjsip. It takes an ast_sip_endpoint and a pjsip_sip_uri and returns a transport name if endpoint->transport is set or if there's an 'x-ast-txp' parameter on the uri and the uri host is an ipv4 or ipv6 address. Otherwise it returns NULL. * An 'ast_sip_dlg_set_transport' function was added to res_pjsip which takes an ast_sip_endpoint, a pjsip_dialog, and an optional pjsip_tpselector. It calls ast_sip_get_transport_name() and if a non-NULL is returned, sets the selector and sets the transport on the dialog. If a selector was passed in, it's updated. * res_pjsip/ast_sip_create_dialog_uac and ast_sip_create_dialog_uas were modified to call ast_sip_dlg_set_transport() instead of their original logic. * res_pjsip/create_out_of_dialog_request was modified to call ast_sip_get_transport_name() and pjsip_tx_data_set_transport() instead of its original logic. * Existing transport logic was removed from endpt_send_request since that can only be called after a create_out_of_dialog_request. * res_pjsip/ast_sip_create_rdata was converted to a wrapper around a new 'ast_sip_create_rdata_with_contact' function which allows a contact_uri to be specified in addition to the existing parameters. (See below) * res_pjsip_pubsub/internal_pjsip_evsub_send_request was eliminated since all it did was transport selection and that is now done in ast_sip_create_dialog_uac and ast_sip_create_dialog_uas. * 'contact_uri' was added to subscription_persistence. This was necessary because although the parsed rdata contact header has the x-ast-txp parameter added (if appropriate), subscription_persistence_update stores the raw packet which doesn't have it. subscription_persistence_recreate was then updated to call ast_sip_create_rdata_with_contact with the persisted contact_uri so the recreated subscription has the correct transport info to send the NOTIFYs. * res_pjsip_session/internal_pjsip_inv_send_msg was eliminated since all it did was transport selection and that is now done in ast_sip_create_dialog_uac. * pjsip_message_ip_updater/multihomed_on_tx_message was updated to remove all traces of the x-ast-txp parameter from the outgoing headers. NOTE: This change does NOT modify the behavior of permanent contacts specified on an aor. To do so would require that the permanent contact's contact uri be updated with the x-ast-txp parameter and the aor sorcery object updated. If we need to persue this, we need to think about cloning permanent contacts into the same store as the dynamic ones on an aor load so they can be updated without disturbing the originally configured value. You CAN add the x-ast-txp parameter to a permanent contact's uri but it would be much simpler to just set endpoint->transport. Change-Id: I4ee1f51473da32ca54b877cd158523efcef9655f	9 years ago
Mark Michelson	7bc69753bc	Add rtcp-mux support ... This commit adds support for RFC 5761: Multiplexing RTP Data and Control Packets on a Single Port. Specifically, it enables the feature when using chan_pjsip. A new option, "rtcp_mux" has been added to endpoint configuration in pjsip.conf. If set, then Asterisk will attempt to use rtcp-mux with whatever it communicates with. Asterisk follows the rules set forth in RFC 5761 with regards to falling back to standard RTCP behavior if the far end does not indicate support for rtcp-mux. The lion's share of the changes in this commit are in res_rtp_asterisk.c. This is because it was pretty much hard wired to have an RTP and an RTCP transport. The strategy used here is that when rtcp-mux is enabled, the current RTCP transport and its trappings (such as DTLS SSL session) are freed, and the RTCP session instead just mooches off the RTP session. This leads to a lot of specialized if statements throughout. ASTERISK-26732 #close Reported by Dan Jenkins Change-Id: If46a93ba1282418d2803e3fd7869374da8b77ab5	9 years ago
Matt Jordan	b3c2c996f1	res_pjsip_endpoint_identifier_ip: Add an option to match requests by header ... This patch adds a new features to the endpoint identifier module, 'match_header'. When set, inbound requests are matched by a provided SIP header: value pair. This option works in conjunction with the existing 'match' configuration option, such that if any 'match*' attribute matches an inbound request, the request is associated with the specified endpoint. Since this module now identifies by more than just IP address, appropriate renaming of the module and/or variables can be done in a non-release branch. ASTERISK-26863 #close Change-Id: Icfc14835c962f92e35e67bbdb235cf0589de5453 (cherry picked from commit 30f52d79d7)	9 years ago
Joshua Colp	37aaaa2da2	res_pjsip_endpoint_identifier_ip: Add support for SRV lookups. ... This change implements SRV support for the IP based endpoint identifier module. All possible addresses through SRV are looked up and added as matches. If no SRV records are available a fallback to normal host resolution is done. If an IP address is provided then no SRV lookup occurs. This is configured using the "srv_lookups" option on the identify section and defaults to "yes". ASTERISK-26693 Change-Id: I6b641e275bf96629320efa8b479737062aed82ac	9 years ago
Joshua Colp	e0bc17edff	pjsip: Fix a few media bugs with reinvites and asymmetric payloads. ... When channel format changes occurred as a result of an RTP re-negotiation the bridge was not informed this had happened. As a result the bridge technology was not re-evaluated and the channel may have been in a bridge technology that was incompatible with its formats. The bridge is now unbridged and the technology re-evaluated when this occurs. The chan_pjsip module also allowed asymmetric codecs for sending and receiving. This did not work with all devices and caused one way audio problems. The default has been changed to NOT do this but to match the sending codec to the receiving codec. For users who want asymmetric codecs an option has been added, asymmetric_rtp_codec, which will return chan_pjsip to the previous behavior. The codecs returned by the chan_pjsip module when queried by the bridge_native_rtp module were also not reflective of the actual negotiated codecs. The nativeformats are now returned as they reflect the actual negotiated codecs. ASTERISK-26423 #close Change-Id: I6ec88c6e3912f52c334f1a26983ccb8f267020dc	9 years ago
Rodrigo Ramírez Norambuena	29b7a5b00f	Add text of cdr directory into README.md for ast-db-manage ... Change-Id: I68321c4bea50730c39fdb486e5f23aeadd1ad636	9 years ago
George Joseph	86550f9c17	alembic: Allow cdr, config and voicemail to exist in the same schema ... cdr, config and voicemail are all separate alembic trees. Because alembic's default is to use a table named 'alembic_version' to store the current tree revision, the 3 trees can't exist in the same schema without stepping on each other. Now each tree uses 'alembic_version_<tree_name>' as the version table. Each tree's env.py script now first checks for 'alembic_version'. If it finds it AND its revision is in the tree's history, the script renames it to 'alembic_version_<tree_name>'. Regardless, the script then continues with the migration using 'alembic_version_<tree_name>' and creates that table if it's not found. The result is that if an existing 'alembic_version' table was found but it didn't belong to this tree, it's left alone and 'alembic_version_<tree_name>' is used or created. WARNING: If multiple trees are using the same schema, they MUST NOT CRU or D any objects with names that might exist in the other trees. An example would be 'yesno_values' type. If two trees perform operations on it, one tree could pull it out from under the other. Thankfully we currently don't share any names among cdr, config and voicemail. NOTE: Since the env.py scripts in each tree were identical, a common env.py has been placed in the ast-db-manage directory and a symlink to it has been placed in each tree directory. ASTERISK-24311 #close Reported-by: Dafi Ni Change-Id: I4d593f000350deb5d21a14fa1e9bc3896844d898	9 years ago
Richard Mudgett	30af92e78d	res_pjsip: Add ignore_uri_user_options option. ... This implements the chan_sip legacy_useroption_parsing option but with a better name. * Made the caller-id number and redirecting number strings obtained from incoming SIP URI user fields always truncated at the first semicolon. People don't care about anything after the semicolon showing up on their displays even though the RFC allows the semicolon. ASTERISK-26316 #close Reported by: Kevin Harwell Change-Id: Ib42b0e940dd34d84c7b14bc2e90d1ba392624f62	9 years ago
George Joseph	329507fe20	res_pjsip: Add contact_user to endpoint ... contact_user, when specified on an endpoint, will override the user portion of the Contact header on outgoing requests. Change-Id: Icd4ebfda2f2e44d3ac749d0b4066630e988407d4	9 years ago
Kevin Harwell	5913929d31	alembic: add auth_username to endpoint's identify_by enum ... A new identify_by option was added recently, auth_username. However, this setting was not added as an allowable choice in the database enumeration value. This patch updates the current enumeration, adding in the new setting. ASTERISK-26268 #close Change-Id: Ib4788e8485e4cd40172ec0abbf5810a147ab8bf8	9 years ago
Kevin Harwell	f6ec94cca6	alembic/sqlalchemy: auto increment only allowed on a single column ... The extensions table defined two columns (id and priority) as primary key autoincrement columns. However only one is allowed when defining the primary key. This patch removes the autoincrement attribute from the priority column since it does not need to be as such and really should not have been on there in the first place. This patch also removes 'context', 'exten', and 'priority' from the primary key index and creates a new combined unique contraint index on them. ASTERISK-26183 #close Change-Id: Ib9c712c612a4d7ec1edb0dcb77f1bae0905a470b	9 years ago
Alexei Gradinari	a06a1af0eb	res_pjsip_mwi: fix unsolicited mwi blocks PJSIP stack ... The PJSIP taskprocessors could be overflowed on startup if there are many (thousands) realtime endpoints configured with unsolicited mwi. The PJSIP stack could be totally unresponsive for a few minutes after boot completed. This patch creates a separate PJSIP serializers pool for mwi and makes unsolicited mwi use serializers from this pool. This patch also adds 2 new global options to tune taskprocessor alert levels: 'mwi_tps_queue_high' and 'mwi_tps_queue_low'. This patch also adds new global option 'mwi_disable_initial_unsolicited' to disable sending unsolicited mwi to all endpoints on startup. If disabled then unsolicited mwi will start processing on next endpoint's contact update. ASTERISK-26230 #close Change-Id: I4c8ecb82c249eb887930980a800c9f87f28f861a	9 years ago
Mark Michelson	eda95236d1	Fix sqlalchemy error regarding identifier length. ... sqlalchemy was complaining: sqlalchemy.exc.IdentifierError: Identifier 'ps_contacts_qualifyfreq_exptime' exceeds maximum length of 30 characters This fixes the problem by changing the index name to be "ps_contacts_qualifyfreq_exp" instead. ASTERISK-26227 #close Reported by Mark Michelson Change-Id: I0ed784f87504be2a59ee8d3242ef6f625d5ed1a9	9 years ago
Richard Mudgett	851b1c3a17	res_pjsip: Add fax_detect_timeout endpoint option. ... The new endpoint option allows the PJSIP channel driver's fax_detect endpoint option to timeout on a call after the specified number of seconds into a call. The new feature is disabled if the timeout is set to zero. The option is disabled by default. ASTERISK-26214 Reported by: Richard Mudgett Change-Id: Id5a87375fb2c4f9dc1d4b44c78ec8735ba65453d	9 years ago
Alexei Gradinari	2c16a81dd5	res_pjsip: Added "subscribe_context" to endpoint ... If specified, incoming SUBSCRIBE requests will be searched for the matching extension in the indicated context. If no "subscribe_context" is specified, then the "context" setting is used. ASTERISK-25471 #close Change-Id: I3fb7a15f5bc154079bd348c08b7ad1cdd2d5e514	9 years ago
Joshua Colp	7ed680cf92	Merge "res_pjsip: improve realtime performance #2" into 13	9 years ago
Mark Michelson	1b79e2deff	Fix Alembic upgrades. ... A non-existent constraint was being referenced in the upgrade script. This patch corrects the problem by removing the reference. This patch fixes another realtime problem as well. Our Alembic scripts store booleans as yes or no values. However, Sorcery tries to insert "true" or "false" instead. This patch updates Sorcery to use "yes" and "no" ASTERISK-26128 #close Change-Id: I366dbbf91418a9cb160b3ca74b0e59b5ac284bec	9 years ago
Alexei Gradinari	b3c787d1dd	res_pjsip: improve realtime performance #2 ... The patch removes updating all Endpoints' status on startup. Instead, only non-qualified aors with static contact and non-qualified non-expired contacts are retrieved from the realtime to update the endpoint status to ONLINE. The endpoint name was added to the contact object to simply find the endpoint that created this contact. The status of endpoints with qualified aors will be updated by 'qualify' functions. ASTERISK-26061 #close Change-Id: Id324c1776fa55d3741e0c5457ecac0304cb1a0df	9 years ago
Joshua Colp	cda3385409	alembic: Fix migration. ... The 81b01a191a46_pjsip_add_contact_reg_server.py script was attempting to use UniqueConstraint and failing. It was not imported and after importing it also continued to fail. I've changed the script to use the explicit name of the constraint instead. Change-Id: I2438b0be90b7ce583b47dd27983c0c1a02cea5b9	10 years ago
Alexei Gradinari	230686f4ec	res_pjsip: add "via_addr", "via_port", "call_id" to contact ... As res_pjsip_nat rewrites contact's address, only the last Via header can contain the source address of registered endpoint. Also Call-Id header may contain the source address of registered endpoint. Added "via_addr", "via_port", "call_id" to contact. Added new fields ViaAddress, CallID to AMI event ContactStatus. ASTERISK-26011 Change-Id: I36bcc0bf422b3e0623680152d80486aeafe4c576	10 years ago
Alexei Gradinari	524a302974	res_pjsip: Endpoint IP Access Controls ... With the old SIP module we can use IP access controls per peer. PJSIP module missing this feature. This patch added next configuration Endpoint options: "acl" - list of IP ACL section names in acl.conf "deny" - List of IP addresses to deny access from "permit" - List of IP addresses to permit access from "contact_acl" - List of Contact ACL section names in acl.conf "contact_deny" - List of Contact header addresses to deny "contact_permit" - List of Contact header addresses to permit This patch also better logging failed request: add custom message instead of "No matching endpoint found" add SIP method to logging ASTERISK-25900 Change-Id: I456dea3909d929d413864fb347d28578415ebf02	10 years ago
zuul	a01ce2b889	Merge "res_pjsip: improve realtime performance" into 13	10 years ago
Alexei Gradinari	9c2032240e	res_pjsip: improve realtime performance ... This patch modified pjsip_options to retrieve only permament contacts for aor if the qualify_frequency is > 0 and persisted contacts if the qualify_frequency is > 0. This patch also fixed a bug in res_sorcery_astdb. res_sorcery_astdb doesn't save object data retrived from astdb. ASTERISK-25826 Change-Id: I1831fa46c4578eae5a3e574ee3362fddf08a1f05	10 years ago
Alexei Gradinari	fe38d21c2a	pjsip: Added "reg_server" to contacts (fixed alembic) ... ASTERISK-25931 Change-Id: Icc4321a88f5c93ff809da3f372eebbf69c6a8549	10 years ago
Alexei Gradinari	3cb8934de0	pjsip: Added "reg_server" to contacts. ... If the Asterisk system name is set in asterisk.conf, it will be stored into the "reg_server" field in the ps_contacts table to facilitate multi-server setups. ASTERISK-25931 Change-Id: Ia8f6bd2267809c78753b52bcf21835b9b59f4cb8	10 years ago
George Joseph	38bed4515d	res_pjsip: Add ability to identify by Authorization username ... A feature of chan_sip that service providers relied upon was the ability to identify by the Authorization username. This is most often used when customers have a PBX that needs to register rather than identify by IP address. From my own experiance, this is pretty common with small businesses who otherwise don't need a static IP. In this scenario, a register from the customer's PBX may succeed because From will usually contain the PBXs account id but an INVITE will contain the caller id. With nothing recognizable in From, the service provider's Asterisk can never match to an endpoint and the INVITE just stays unauthorized. The fixes: A new value "auth_username" has been added to endpoint/identify_by that will use the username and digest fields in the Authorization header instead of username and domain in the the From header to match an endpoint, or the To header to match an aor. This code as added to res_pjsip_endpoint_identifier_user rather than creating a new module. Although identify_by was always a comma-separated list, there was only 1 choice so order wasn't preserved. So to keep the order, a vector was added to the end of ast_sip_endpoint. This is only used by res_pjsip_registrar to find the aor. The res_pjsip_endpoint_identifier_* modules are called in globals/endpoint_identifier_order. Along the way, the logic in res_pjsip_registrar was corrected to match most-specific to least-specific as res_pjsip_endpoint_identifier_user does. The order is: username@domain username@domain_alias username Auth by username does present 1 problem however, the first INVITE won't have an Authorization header so the distributor, not finding a match on anything, sends a securty_alert. It still sends a 401 with a challenge so the next INVITE will have the Authorization header and presumably succeed. As a result though, that first security alert is actually a false alarm. To address this, a new feature has been added to pjsip_distributor that keeps track of unidentified requests and only sends the security alert if a configurable number of unidentified requests come from the same IP in a configurable amout of time. Those configuration options have been added to the global config object. This feature is only used when auth_username is enabled. Finally, default_realm was added to the globals object to replace the hard coded "asterisk" used when an endpoint is not yet identified. The testsuite tests all pass but new tests are forthcoming for this new feature. ASTERISK-25835 #close Reported-by: Ross Beer Change-Id: I30ba62d208e6f63439600916fcd1c08a365ed69d	10 years ago
Alexei Gradinari	df3639700a	res_pjsip: disable multi domain to improve realtime performace ... This patch added new global pjsip option 'disable_multi_domain'. Disabling Multi Domain can improve Realtime performance by reducing number of database requests. ASTERISK-25930 #close Change-Id: I2e7160f3aae68475d52742107949a799aa2c7dc7	10 years ago
George Joseph	d312fdeb1b	alembic: Remove batch operations (and sqlite support) ... Because SQLite doesn't support full ALTER capabilities, alembic scripts require batch operations. However, that capability wasn't available until 0.7.0 which some distributions haven't reached yet. Therefore, the batch operations introduced in commit 86d6e44cc (review 2319) have been reverted and SQLite is unsupported again, for now anyway. Tested the full upgrade and downgrade on MySQL/Mariadb and Postgresql. ASTERISK-25890 #close Reported-by: Harley Peters Change-Id: I82eba5456736320256f6775f5b0b40133f4d1c80	10 years ago