201 Commits (4328d320c2aba32b7848b46a8963fbb7308a18c2)

Author	SHA1	Message	Date
George Joseph	4328d320c2	build: GCC 5.1.x catches some new const, array bounds and missing paren issues ... Fixed 1 issue in each of the affected files. ASTERISK-25494 #close Reported-by: George Joseph Tested-by: George Joseph Change-Id: I818f149cd66a93b062df421e1c73c7942f5a4a77	10 years ago
Corey Farrell	50044fdc15	Stasis: Fix unsafe use of stasis_unsubscribe in modules. ... Many uses of stasis_unsubscribe in modules can be reached through unload. These have been switched to stasis_unsubscribe_and_join. Some subscription callbacks do nothing, for these I've created a noop callback function in stasis.c. This is used by some modules that monitor MWI topics in order to enable cache, since the callback does not become invalid after dlclose it is safe to use stasis_unsubscribe on these, even during module unload. ASTERISK-25121 #close Change-Id: Ifc2549fbd8eef7d703c222978e8f452e2972189c	10 years ago
Richard Mudgett	0bb0d4a603	chan_dahdi/sig_pri: Fix crash on ISDN call hangup collision. ... If an ISDN call is hungup by both sides at the same time a crash could happen. * Added missing NULL checks for the owner channel after calling pri_queue_pvt_cause_data() in two places. Code after those calls need to check the owner channel pointer for NULL before use because pri_queue_pvt_cause_data() needs to do deadlock avoidance to lock the owner and the owner may get hung up. ASTERISK-21893 #close Reported by: Alexandr Gordeev Change-Id: Ica3e266ebc7a894b41d762326f08653e1904bb9a	10 years ago
Richard Mudgett	03c51cf525	chan_dahdi: Add the chan_dahdi.conf force_restart_unavailable_chans option. ... Some telco switches occasionally ignore ISDN RESTART requests. The fix for ASTERISK-19608 added an escape clause for B channels in the restarting state if the telco ignores a RESTART request. If the telco fails to acknowledge the RESTART then Asterisk will assume the telco acknowledged the RESTART on the second call attempt requesting the B channel by the telco. The escape clause is good for dealing with RESTART requests in general but it does cause the next call for the restarting B channel to be rejected if the telco insists the call must go on that B channel. chan_dahdi doesn't really need to issue a RESTART request in response to receiving a cause 44 (Requested channel not available) code. Sending the RESTART in such a situation is not required (nor prohibited) by the standards. I think chan_dahdi does this for historical reasons to deal with buggy peers to get channels unstuck in a similar fashion as the chan_dahdi.conf resetinterval option. * Add the chan_dahdi.conf force_restart_unavailable_chans compatability option that when disabled will prevent chan_dahdi from trying to RESTART the channel in response to a cause 44 code. ASTERISK-25034 #close Reported by: Richard Mudgett Change-Id: Ib8b17a438799920f4a2038826ff99a1884042f65	10 years ago
Richard Mudgett	614f506690	chan_dahdi/sig_pri: Make post AMI HangupRequest events on PRI channels. ... The chan_dahdi channel driver is a very old driver. The ability for it to support ISDN was added well after the initial analog support. Setting the softhangup flags is a carry over from the original analog code. The driver was not updated to call ast_queue_hangup() which will post the AMI HangupRequest event. * Changed sig_pri.c to call ast_queue_hangup() instead of setting the softhangup flag when the remote party initiates a hangup. ASTERISK-24895 #close Reported by: Andrew Zherdin Change-Id: I5fe2e48556507785fd8ab8e1c960683fd5d20325	10 years ago
Corey Farrell	c08fd275bf	Logger: Convert 'struct ast_callid' to unsigned int. ... Switch logger callid's from AO2 objects to simple integers. This helps in two ways. Copying integers is faster than referencing AO2 objects, so this will result in a small reduction in logger overhead. This also erases the possibility of an infinate loop caused by an invalid callid in threadstorage. ASTERISK-24833 #comment Committed callid conversion to trunk. Reported by: Corey Farrell Review: https://reviewboard.asterisk.org/r/4466/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432834 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago
Walter Doekes	8b6ecc449c	Fix printf problems with high ascii characters after r413586 (1.8). ... In r413586 (1.8) various casts were added to silence gcc 4.10 warnings. Those fixes included things like: -out += sprintf(out, "%%%02X", (unsigned char) *ptr); +out += sprintf(out, "%%%02X", (unsigned) *ptr); That works for low ascii characters, but for the high range that yields e.g. FFFFFFC3 when C3 is expected. This changeset: - fixes those casts to use the 'hh' unsigned char modifier instead - consistently uses %02x instead of %2.2x (or other non-standard usage) - adds a few 'h' modifiers in various places - fixes a 'replcaes' typo - dev/urandon typo (in 13+ patch) Review: https://reviewboard.asterisk.org/r/4263/ ASTERISK-24619 #close Reported by: Stefan27 (on IRC) ........ Merged revisions 429673 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 429674 from http://svn.asterisk.org/svn/asterisk/branches/12 ........ Merged revisions 429675 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429683 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	1106e8fd0f	main/stasis: Allow subscriptions to use a threadpool for message delivery ... Prior to this patch, all Stasis subscriptions would receive a dedicated thread for servicing published messages. In contrast, prior to r400178 (see review https://reviewboard.asterisk.org/r/2881/), the subscriptions shared a thread pool. It was discovered during some initial work on Stasis that, for a low subscription count with high message throughput, the threadpool was not as performant as simply having a dedicated thread per subscriber. For situations where a subscriber receives a substantial number of messages and is always present, the model of having a dedicated thread per subscriber makes sense. While we still have plenty of subscriptions that would follow this model, e.g., AMI, CDRs, CEL, etc., there are plenty that also fall into the following two categories: * Large number of subscriptions, specifically those tied to endpoints/peers. * Low number of messages. Some subscriptions exist specifically to coordinate a single message - the subscription is created, a message is published, the delivery is synchronized, and the subscription is destroyed. In both of the latter two cases, creating a dedicated thread is wasteful (and in the case of a large number of peers/endpoints, harmful). In those cases, having shared delivery threads is far more performant. This patch adds the ability of a subscriber to Stasis to choose whether or not their messages are dispatched on a dedicated thread or on a threadpool. The threadpool is configurable through stasis.conf. Review: https://reviewboard.asterisk.org/r/4193 ASTERISK-24533 #close Reported by: xrobau Tested by: xrobau ........ Merged revisions 428681 from http://svn.asterisk.org/svn/asterisk/branches/12 ........ Merged revisions 428687 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428688 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	d834be9faf	chan_dahdi/sig_pri: Fix type mismatch in the idledial feature's channel creation. ... Square pegs in round holes don't work very well. ........ Merged revisions 418261 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 418262 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 418263 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418264 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	3bd495a688	chan_dahdi: Add inband_on_setup_ack compatibility option. ... The new inband_on_setup_ack option causes Asterisk to assume inband audio may be present when a SETUP_ACKNOWLEDGE message is received. Q.931 Section 5.1.3 says that in scenarios with overlap dialing, when a dialtone is sent from the network side, progress indicator 8 "Inband info now available" MAY be sent to the CPE if no digits were received with the SETUP. It is thus implied that the ie is mandatory if digits came with the SETUP and dialtone is needed. This option should be enabled, when the network sends dialtone and you want to hear it, but the network doesn't send the progress indicator when needed. NOTE: For Q.SIG setups this option should be enabled when outgoing overlap dialing is also enabled because Q.SIG does not send the progress indicator with the SETUP ACK. The commit -r413714 (AST-1338) which causes this issue was dealing with a SIP-to-ISDN interoperability issue. This commit is a merge of the two patches indicated below. ASTERISK-23897 #close Reported by: Pavel Troller Patches: pri-4.diff (license #6302) patch uploaded by Pavel Troller jira_asterisk_23897_v11.patch (license #5621) patch uploaded by rmudgett Review: https://reviewboard.asterisk.org/r/3633/ ........ Merged revisions 417956 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 417957 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 417958 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417976 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Tzafrir Cohen	3451d6a72d	suspended destructions of pri spans on events ... If a DAHDI span disappears, we wish for its representation in Asterisk to be destroyed as well. The information about the span's removal may come from several paths: 1. DAHDI sends DAHDI_EVENT_REMOVE on every channel. 2. An extra DAHDI_EVENT_REMOVED is sent on every subsequent call to DAHDI_GET_EVENT. 3. Every read (including the internal one by libpri on the D-channel) returns -ENODEV. Asterisk responsds to DAHDI_EVENT_REMOVE on a channel by destroying it. Destroying a channel requires holding the channel list lock (iflock). Destroying a channel that is part of a span requires holding the span's lock. Destroying a channel from a context that holds the span lock, while at the same time another channel is destroyed directly, leads to a deadlock. Solution: don't destroy span while holding the channels list lock. Thus changes in this patch: * Deferring removal of PRI spans in response to events: doomed spans are collected on a list. * Doomed spans are removed periodically by the monitor thread. * ENODEV reads from the D-channel will warant the same deferred removal. Review: https://reviewboard.asterisk.org/r/3548/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417059 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	6e2e38083d	sig_pri.c: Pull the pri_dchannel() PRI_EVENT_RING case into its own function. ... * Populate the CALLERID(ani2) value (and the special CALLINGANI2 channel variable) with the ANI2 value in addition to the PRI specific ANI2 channel variable. * Made complete snapshot staging with the channel lock held. All channel snapshots need to be done while the channel lock is held. ........ Merged revisions 414050 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 414051 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@414052 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	8b6ab4782a	chan_dahdi/sig_pri: Prevent unnecessary PROGRESS events when overlap dialing is enabled. ... When overlap dialing is enabled, the lack of inband audio available information in the SETUP_ACKNOWLEDGE events causes an interoperability problem with SIP. sig_pri doesn't know if there is dialtone present when a SETUP_ACKNOWLEDGE is received so it assumes it is there and posts an AST_CONTROL_PROGRESS frame. The SIP channel driver then sends out a 183 Session Progress and blocks the desired 180 Ringing message when the ALERTING message comes in. * Made the configure script detect if the installed version of libpri supports the SETUP_ACKNOWLEDGE enhancements. * Using the new API, made generate an AST_CONTROL_PROGRESS frame on an incoming SETUP_ACKNOWLEDGE message when the message indicates inband audio is present instead of assuming that dialtone is present. * Using the new API, made SETUP_ACKNOWLEDGE send out an inband audio available indication only if dialtone is expected. The change also makes the fallback behaviour of sending the PROGRESS message better by sending it only if dialtone is expected. * Changed receiving a PROCEEDING message to not generate an AST_CONTROL_PROGRESS frame if the progress indication ie indicates non-end-to-end-ISDN. This helps interoperability with SIP. * Changed sending a PROCEEDING message in response to an AST_CONTROL_PROCEEDING frame to not indicate inband audio available. It was silly to do so anyway because the channel driver doesn't know if inband audio is even available. This helps interoperability with SIP. This patch and a corresponding change in libpri work together to allow Asterisk to control the inband audio available progress indication ie on the SETUP_ACKNOWLEDGE message when dialtone is present. AST-1338 #close Reported by: Tyler Stewart Review: https://reviewboard.asterisk.org/r/3521/ ........ Merged revisions 413714 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 413765 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 413771 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413772 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	552dbe531e	Fix compiler warning from GCC 4.10 fixup. ... ........ Merged revisions 413766 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413770 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kinsey Moore	abd3e4040b	Allow Asterisk to compile under GCC 4.10 ... This resolves a large number of compiler warnings from GCC 4.10 which cause the build to fail under dev mode. The vast majority are signed/unsigned mismatches in printf-style format strings. ........ Merged revisions 413586 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 413587 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 413588 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413589 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	ecbd052741	uniqueid: Fix chan_dahdi, sig_pri, sig_ss7, test_cdr, and test_cel compiler errors. ... (issue ASTERISK-23120) ........ Merged revisions 410171 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410174 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	eddbe10f91	chan_dahdi/PRI: Suppress CONNECTED_LINE updates when nothing in the udpate is valid. ... * Also simplified some subddress handling code. (closes issue ASTERISK-23008) Reported by: Michael Cargile ........ Merged revisions 405926 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 405927 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 405928 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405947 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	e4803bbd9e	Voicemail: Remove mailbox identifier format (box@context) assumptions in the system. ... This change is in preparation for external MWI support. Removed code from the system for normal mailbox handling that appends @default to the mailbox identifier if it does not have a context. The only exception is the legacy hasvoicemail users.conf option. The legacy option will only work for app_voicemail mailboxes. The system cannot make any assumptions about the format of the mailbox identifer used by app_voicemail. chan_sip and chan_dahdi/sig_pri had the most changes because they both tried to interpret the mailbox identifier. chan_sip just stored and compared the two components. chan_dahdi actually used the box information. The ISDN MWI support configuration options had to be reworked because chan_dahdi was parsing the box@context format to get the box number. As a result the mwi_vm_boxes chan_dahdi.conf option was added and is documented in the chan_dahdi.conf.sample file. Review: https://reviewboard.asterisk.org/r/3072/ ........ Merged revisions 404348 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404350 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kevin Harwell	28c0cb28d0	channel locking: Add locking for channel snapshot creation ... Original commit message by mmichelson (asterisk 12 r403311): "This adds channel locks around calls to create channel snapshots as well as other functions which operate on a channel and then end up creating a channel snapshot. Functions that expect the channel to be locked prior to being called have had their documentation updated to indicate such." The above was initially committed and then reverted at r403398. The problem was found to be in core_local.c in the publish_local_bridge_message function. The ast_unreal_lock_all function locks and adds a reference to the returned channels and while they were being unlocked they were not being unreffed when no longer needed. Fixed by unreffing the channels. Also in bridge.c a lock was obtained on "other->chan", but then an attempt was made to unlock "other" and not the previously locked channel. Fixed by unlocking "other->chan" (closes issue ASTERISK-22709) Reported by: John Bigelow ........ Merged revisions 404237 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404260 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
David M. Lee	1212906351	Reverting r403311. It's causing ARI tests to hang. ... ........ Merged revisions 403398 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403404 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Mark Michelson	8e8b329e14	Add channel locking for channel snapshot creation. ... This adds channel locks around calls to create channel snapshots as well as other functions which operate on a channel and then end up creating a channel snapshot. Functions that expect the channel to be locked prior to being called have had their documentation updated to indicate such. ........ Merged revisions 403311 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403314 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Joshua Colp	c1235f2639	Reduce channel snapshot creation and publishing by up to 50%. ... This change introduces the ability to stage channel snapshot creation and publishing by suppressing the implicit creation and publishing that some functions have. Once all operations are executed the staging is marked as done and a single snapshot is created and published. Review: https://reviewboard.asterisk.org/r/2889/ ........ Merged revisions 400265 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400266 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
David M. Lee	2de42c2a25	Multiple revisions 399887,400138,400178,400180-400181 ... ........ r399887 | dlee | 2013-09-26 10:41:47 -0500 (Thu, 26 Sep 2013) | 1 line Minor performance bump by not allocate manager variable struct if we don't need it ........ r400138 | dlee | 2013-09-30 10:24:00 -0500 (Mon, 30 Sep 2013) | 23 lines Stasis performance improvements This patch addresses several performance problems that were found in the initial performance testing of Asterisk 12. The Stasis dispatch object was allocated as an AO2 object, even though it has a very confined lifecycle. This was replaced with a straight ast_malloc(). The Stasis message router was spending an inordinate amount of time searching hash tables. In this case, most of our routers had 6 or fewer routes in them to begin with. This was replaced with an array that's searched linearly for the route. We more heavily rely on AO2 objects in Asterisk 12, and the memset() in ao2_ref() actually became noticeable on the profile. This was #ifdef'ed to only run when AO2_DEBUG was enabled. After being misled by an erroneous comment in taskprocessor.c during profiling, the wrong comment was removed. Review: https://reviewboard.asterisk.org/r/2873/ ........ r400178 | dlee | 2013-09-30 13:26:27 -0500 (Mon, 30 Sep 2013) | 24 lines Taskprocessor optimization; switch Stasis to use taskprocessors This patch optimizes taskprocessor to use a semaphore for signaling, which the OS can do a better job at managing contention and waiting that we can with a mutex and condition. The taskprocessor execution was also slightly optimized to reduce the number of locks taken. The only observable difference in the taskprocessor implementation is that when the final reference to the taskprocessor goes away, it will execute all tasks to completion instead of discarding the unexecuted tasks. For systems where unnamed semaphores are not supported, a really simple semaphore implementation is provided. (Which gives identical performance as the original taskprocessor implementation). The way we ended up implementing Stasis caused the threadpool to be a burden instead of a boost to performance. This was switched to just use taskprocessors directly for subscriptions. Review: https://reviewboard.asterisk.org/r/2881/ ........ r400180 | dlee | 2013-09-30 13:39:34 -0500 (Mon, 30 Sep 2013) | 28 lines Optimize how Stasis forwards are dispatched This patch optimizes how forwards are dispatched in Stasis. Originally, forwards were dispatched as subscriptions that are invoked on the publishing thread. This did not account for the vast number of forwards we would end up having in the system, and the amount of work it would take to walk though the forward subscriptions. This patch modifies Stasis so that rather than walking the tree of forwards on every dispatch, when forwards and subscriptions are changed, the subscriber list for every topic in the tree is changed. This has a couple of benefits. First, this reduces the workload of dispatching messages. It also reduces contention when dispatching to different topics that happen to forward to the same aggregation topic (as happens with all of the channel, bridge and endpoint topics). Since forwards are no longer subscriptions, the bulk of this patch is simply changing stasis_subscription objects to stasis_forward objects (which, admittedly, I should have done in the first place.) Since this required me to yet again put in a growing array, I finally abstracted that out into a set of ast_vector macros in asterisk/vector.h. Review: https://reviewboard.asterisk.org/r/2883/ ........ r400181 | dlee | 2013-09-30 13:48:57 -0500 (Mon, 30 Sep 2013) | 28 lines Remove dispatch object allocation from Stasis publishing While looking for areas for performance improvement, I realized that an unused feature in Stasis was negatively impacting performance. When a message is sent to a subscriber, a dispatch object is allocated for the dispatch, containing the topic the message was published to, the subscriber the message is being sent to, and the message itself. The topic is actually unused by any subscriber in Asterisk today. And the subscriber is associated with the taskprocessor the message is being dispatched to. First, this patch removes the unused topic parameter from Stasis subscription callbacks. Second, this patch introduces the concept of taskprocessor local data, data that may be set on a taskprocessor and provided along with the data pointer when a task is pushed using the ast_taskprocessor_push_local() call. This allows the task to have both data specific to that taskprocessor, in addition to data specific to that invocation. With those two changes, the dispatch object can be removed completely, and the message is simply refcounted and sent directly to the taskprocessor. Review: https://reviewboard.asterisk.org/r/2884/ ........ Merged revisions 399887,400138,400178,400180-400181 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400186 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	868be02a2f	Fix uninitialized value in struct ast_control_pvt_cause_code usage. ... ........ Merged revisions 397744 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 397745 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397746 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	46b9e5450f	Fix memory corruption when trying to get "core show locks". ... Review https://reviewboard.asterisk.org/r/2580/ tried to fix the mismatch in memory pools but had a math error determining the buffer size and didn't address other similar memory pool mismatches. * Effectively reverted the previous patch to go in the same direction as trunk for the returned memory pool of ast_bt_get_symbols(). * Fixed memory leak in ast_bt_get_symbols() when BETTER_BACKTRACES is defined. * Fixed some formatting in ast_bt_get_symbols(). * Fixed sig_pri.c freeing memory allocated by libpri when MALLOC_DEBUG is enabled. * Fixed __dump_backtrace() freeing memory from ast_bt_get_symbols() when MALLOC_DEBUG is enabled. * Moved __dump_backtrace() because of compile issues with the utils directory. (closes issue ASTERISK-22221) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/2778/ ........ Merged revisions 397525 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 397528 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397570 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kinsey Moore	59753b1ea1	Strip down the old event system ... This removes unused code, event types, IE pltypes, and event IE types where possible and makes several functions private that were once public. This includes a renumbering of the remaining event and IE types which breaks binary compatibility with previous versions. The last remaining consumers of the old event system (or parts thereof) are main/security_events.c, res/res_security_log.c, tests/test_cel.c, tests/test_event.c, main/cel.c, and the CEL backends. Review: https://reviewboard.asterisk.org/r/2703/ (closes issue ASTERISK-22139) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396887 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Mark Michelson	ab6fc47d95	And get rid of another ast_bridged_channel() ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396145 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kinsey Moore	03090a88ba	Fix documentation replication issues ... This prevents XML documentation duplication by expanding channel and bridge snapshot tags into channel and bridge snapshot parameter sets with a given prefix or defaulting to no prefix. This also prevents documentation from becoming fractured and out of date by keeping all variations of the documentation in template form such that it only needs to be updated once and keeps maintenance to a minimum. Review: https://reviewboard.asterisk.org/r/2708/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395985 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
David M. Lee	e1b959ccbb	Split caching out from the stasis_caching_topic. ... In working with res_stasis, I discovered a significant limitation to the current structure of stasis_caching_topics: you cannot subscribe to cache updates for a single channel/bridge/endpoint/etc. To address this, this patch splits the cache away from the stasis_caching_topic, making it a first class object. The stasis_cache object is shared amongst individual stasis_caching_topics that are created per channel/endpoint/etc. These are still forwarded to global whatever_all_cached topics, so their use from most of the code does not change. In making these changes, I noticed that we frequently used a similar pattern for bridges, endpoints and channels: single_topic ----------------> all_topic ^ | single_topic_cached ----+----> all_topic_cached | +----> cache This pattern was extracted as the 'Stasis Caching Pattern', defined in stasis_caching_pattern.h. This avoids a lot of duplicate code between the different domain objects. Since the cache is now disassociated from its upstream caching topics, this also necessitated a change to how the 'guaranteed' flag worked for retrieving from a cache. The code for handling the caching guarantee was extracted into a 'stasis_topic_wait' function, which works for any stasis_topic. (closes issue ASTERISK-22002) Review: https://reviewboard.asterisk.org/r/2672/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395954 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	cafc115896	A great big renaming patch ... This patch renames the bridging* files to bridge*. This may seem pedantic and silly, but it fits better in line with current Asterisk naming conventions: * channel is not "channeling" * monitor is not "monitoring" etc. A bridge is an object. It is a first class citizen in Asterisk. "Bridging" is the act of using a bridge on a set of channels - and the API that fulfills that role is more than just the action. (closes issue ASTERISK-22130) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395378 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kinsey Moore	909ee4bfb9	Refactor extraneous channel events ... This change removes JitterBufStats, ChannelReload, and ChannelUpdate and refactors the following events to travel over Stasis-Core: * LocalBridge * DAHDIChannel * AlarmClear * SpanAlarmClear * Alarm * SpanAlarm * DNDState * MCID * SIPQualifyPeerDone * SessionTimeout Review: https://reviewboard.asterisk.org/r/2627/ (closes issue ASTERISK-21476) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393284 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	6114166237	Refactor chan_dahdi/sig_analog/sig_pri and chan_misdn to use the common transfer functions. ... (closes issue ASTERISK-21523) Reported by: Matt Jordan (closes issue ASTERISK-21524) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/2600/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390804 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jason Parker	154fbf8cae	Split Hold event into Hold/Unhold, and move it into core. ... (closes issue ASTERISK-21487) Review: https://reviewboard.asterisk.org/r/2565/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389746 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	06be8463b6	Migrate a large number of AMI events over to Stasis-Core ... This patch moves a number of AMI events over to the Stasis-Core message bus. This includes: * ChanSpyStart/Stop * MonitorStart/Stop * MusicOnHoldStart/Stop * FullyBooted/Reload * All Voicemail/MWI related events In addition, it adds some Stasis-Core and AMI support for generic AMI messages, refactors the message router in AMI to use a single router with topic forwarding for the topics that AMI cares about, and refactors MWI message types and topics to be more name compliant. Review: https://reviewboard.asterisk.org/r/2532 (closes issue ASTERISK-21462) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389733 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	79818112fd	chan_dahdi: Add inband_on_proceeding compatibility option. ... The new inband_on_proceeding option causes Asterisk to assume inband audio may be present when a PROCEEDING message is received. Q.931 Section 5.1.2 says the network cannot assume that the CPE side has attached to the B channel at this time without explicitly sending the progress indicator ie informing the CPE side to attach to the B channel for audio. However, some non-compliant ISDN switches send a PROCEEDING without the progress indicator ie indicating inband audio is available and assume that the CPE device has connected the media path for listening to ringback and other messages. ASTERISK-17834 which causes this issue was dealing with a non-compliant network switch. (closes issue ASTERISK-21151) Reported by: Gianluca Merlo Tested by: rmudgett ........ Merged revisions 384685 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 384689 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384696 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kinsey Moore	1a2a4578d2	Convert MWI state message type to the new stasis naming convention ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384219 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	23f363fcb1	Set the CALLERID(dnid-num-plan) for incoming ISDN calls. ... The CALLEDTON channel variable is set for incoming ISDN calls to the lower 7 bits of the Q.931 type-of-number/numbering-plan octet. The CALLERID(dnid-num-plan) should have the same value. (closes issue ASTERISK-21248) Reported by: rmudgett ........ Merged revisions 383796 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 383798 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383799 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kinsey Moore	99aa02d17f	Transition MWI to Stasis-core ... Remove MWI's dependency on the event system by moving it to Stasis-core. This also introduces forwarding topic pools in Stasis-core which aggregate many dynamically allocated topics into a single primary topic. Review: https://reviewboard.asterisk.org/r/2368/ (closes issue ASTERISK-21097) Patch-by: Kinsey Moore git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383284 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Mark Michelson	f2bb9afe17	Multiple revisions 375993-375994 ... ........ r375993 | mmichelson | 2012-11-07 11:01:13 -0600 (Wed, 07 Nov 2012) | 30 lines Fix misuses of timeouts throughout the code. Prior to this change, a common method for determining if a timeout was reached was to call a function such as ast_waitfor_n() and inspect the out parameter that told how many milliseconds were left, then use that as the input to ast_waitfor_n() on the next go-around. The problem with this is that in some cases, submillisecond timeouts can occur, resulting in the out parameter not decreasing any. When this happens thousands of times, the result is that the timeout takes much longer than intended to be reached. As an example, I had a situation where a 3 second timeout took multiple days to finally end since most wakeups from ast_waitfor_n() were under a millisecond. This patch seeks to fix this pattern throughout the code. Now we log the time when an operation began and find the difference in wall clock time between now and when the event started. This means that sub-millisecond timeouts now cannot play havoc when trying to determine if something has timed out. Part of this fix also includes changing the function ast_waitfor() so that it is possible for it to return less than zero when a negative timeout is given to it. This makes it actually possible to detect errors in ast_waitfor() when there is no timeout. (closes issue ASTERISK-20414) reported by David M. Lee Review: https://reviewboard.asterisk.org/r/2135/ ........ r375994 | mmichelson | 2012-11-07 11:08:44 -0600 (Wed, 07 Nov 2012) | 3 lines Remove some debugging that accidentally made it in the last commit. ........ Merged revisions 375993-375994 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 375995 from http://svn.asterisk.org/svn/asterisk/branches/10 ........ Merged revisions 376014 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@376015 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Mark Michelson	fdfb3ae5fa	Allow for redirecting reasons to be set to arbitrary strings. ... This allows for the REDIRECTING dialplan function to be used to set the reason to any string. The SIP channel driver has been modified to set the redirecting reason string to the value received in a Diversion header. In addition, SIP 480 response reason text will set the redirecting reason as well. (closes issue AST-942) reported by Malcolm Davenport (closes issue AST-943) reported by Malcolm Davenport Review: https://reviewboard.asterisk.org/r/2101 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373701 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	8b933196e9	Fix loss of MOH on an ISDN channel when parking a call for the second time. ... Using the AMI redirect action to take an ISDN call out of a parking lot causes the MOH state to get confused. The redirect action does not take the call off of hold. When the call is subsequently parked again, the call no longer hears MOH. * Make chan_dahdi/sig_pri restart MOH on repeated AST_CONTROL_HOLD frames if it is already in a state where it is supposed to be sending MOH. The MOH may have been stopped by other means. (Such as killing the generator.) This simple fix is done rather than making the AMI redirect action post an AST_CONTROL_UNHOLD unconditionally when it redirects a channel and thus potentially breaking something with an unexpected AST_CONTROL_UNHOLD. (closes issue ABE-2873) Patches: jira_abe_2873_c.3_bier.patch (license #5621) patch uploaded by rmudgett ........ Merged revisions 372521 from https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier ........ Merged revisions 372522 from http://svn.asterisk.org/svn/asterisk/branches/10 ........ Merged revisions 372523 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372524 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kinsey Moore	76d642ff69	Add HANGUPCAUSE information to callee channels ... This adds HANGUPCAUSE information to called channels so that hangup handlers can, in conjunction with predial dialplan execution, access the hangupcause information when the dialed channel hangs up on a one-to-one basis instead of a many-to-one basis as with HANGUPCAUSE usage on the caller channel. Review: https://reviewboard.asterisk.org/r/2069/ (closes issue ASTERISK-20198) ........ Merged revisions 371258 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@371259 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	fb6238899b	Add private representation of caller, connected and redirecting party ids. ... This patch adds the feature "Private representation of caller, connected and redirecting party ids", as previously discussed with us (DATUS) and Digium. 1. Feature motivation Until now it is quite difficult to modify a party number or name which can only be seen by exactly one particular instantiated technology channel subscriber. One example where a modified party number or name on one channel is spread over several channels are supplementary services like call transfer or pickup. To implement these features Asterisk internally copies caller and connected ids from one channel to another. Another example are extension subscriptions. The monitoring entities (watchers) are notified of state changes and - if desired - of party numbers or names which represent the involving call parties. One major feature where a private representation of party names is essentially needed, i.e. where a party name shall be exclusively signaled to only one particular user, is a private user-specific name resolution for party numbers. A lookup in a private destination-dependent telephone book shall provide party names which cannot be seen by any other user at any time. 2. Feature Description This feature comes along with the implementation of additional private party id elements for caller id, connected id and redirecting ids inside Asterisk channels. The private party id elements can be read or set by the user using Asterisk dialplan functions. When a technology channel is initiating a call, receives an internal connected-line update event, or receives an internal redirecting update event, it merges the corresponding public id with the private id to create an effective party id. The effective party id is then used for protocol signaling. The channel technologies which initially support the private id representation with this patch are SIP (chan_sip), mISDN (chan_misdn) and PRI (chan_dahdi). Once a private name or number on a channel is set and (implicitly) made valid, it is generally used for any further protocol signaling until it is rewritten or invalidated. To simplify the invalidation of private ids all internally generated connected/redirecting update events and also all connected/redirecting update events which are generated by technology channels -- receiving regarding protocol information - automatically trigger the invalidation of private ids. If not using the private party id representation feature at all, i.e. if using only the 'regular' caller-id, connected and redirecting related functions, the current characteristic of Asterisk is not affected by the new extended functionality. 3. User interface Description To grant access to the private name and number representation from the Asterisk dialplan, the CALLERID, CONNECTEDLINE and REDIRECTING dialplan functions are extended by the following data types. The formats of these data types are equal to the corresponding regular 'non-private' already existing data types: CALLERID: priv-all priv-name priv-name-valid priv-name-charset priv-name-pres priv-num priv-num-valid priv-num-plan priv-num-pres priv-subaddr priv-subaddr-valid priv-subaddr-type priv-subaddr-odd priv-tag CONNECTEDLINE: priv-name priv-name-valid priv-name-pres priv-name-charset priv-num priv-num-valid priv-num-pres priv-num-plan priv-subaddr priv-subaddr-valid priv-subaddr-type priv-subaddr-odd priv-tag REDIRECTING: priv-orig-name priv-orig-name-valid priv-orig-name-pres priv-orig-name-charset priv-orig-num priv-orig-num-valid priv-orig-num-pres priv-orig-num-plan priv-orig-subaddr priv-orig-subaddr-valid priv-orig-subaddr-type priv-orig-subaddr-odd priv-orig-tag priv-from-name priv-from-name-valid priv-from-name-pres priv-from-name-charset priv-from-num priv-from-num-valid priv-from-num-pres priv-from-num-plan priv-from-subaddr priv-from-subaddr-valid priv-from-subaddr-type priv-from-subaddr-odd priv-from-tag priv-to-name priv-to-name-valid priv-to-name-pres priv-to-name-charset priv-to-num priv-to-num-valid priv-to-num-pres priv-to-num-plan priv-to-subaddr priv-to-subaddr-valid priv-to-subaddr-type priv-to-subaddr-odd priv-to-tag Reported by: Thomas Arimont Review: https://reviewboard.asterisk.org/r/2030/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@371120 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	18d5041981	Use better libss7 detection test and move libpri compile test. ... ........ Merged revisions 371012 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 371013 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@371030 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	35bf5efeaf	Convert sig_pri to use a global callback table. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370893 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kinsey Moore	9b16c8b0f6	Clean up and ensure proper usage of alloca() ... This replaces all calls to alloca() with ast_alloca() which calls gcc's __builtin_alloca() to avoid BSD semantics and removes all NULL checks on memory allocated via ast_alloca() and ast_strdupa(). (closes issue ASTERISK-20125) Review: https://reviewboard.asterisk.org/r/2032/ Patch-by: Walter Doekes (wdoekes) ........ Merged revisions 370642 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 370643 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370655 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kinsey Moore	cb9756daa2	Add hangupcause translation support ... The HANGUPCAUSE hash (trunk only) meant to replace SIP_CAUSE has now been replaced with the HANGUPCAUSE and HANGUPCAUSE_KEYS dialplan functions to better facilitate access to the AST_CAUSE translations for technology-specific cause codes. The HangupCauseClear application has also been added to remove this data from the channel. (closes issue SWP-4738) Review: https://reviewboard.asterisk.org/r/2025/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370316 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	9bc2127d7b	Fix validation errors when producing documentation using default build script ... The awk script parses out the first instance of the DOCUMENTATION tag that it finds within a file. If a file did not previously have a DOCUMENTATION tag but received one due to it having an AMI event, then the XML fragment associated with the AMI event was erroneously placed in the resulting XML file. Without the python scripts, these XML fragments will not validate. This patch adds DOCUMENTATION tags at the top of those files that did not previously have them to prevent the awk script from pulling AMI event documentation. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369910 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	2ffae5745d	Add some additional documentation for core AMI events ... This patch adds some basic documentation for a number of modules. This includes core source files in Asterisk (those in main), as well as chan_agent, chan_dahdi, chan_local, sig_analog, and sig_pri. The DTD has also been updated to allow referencing of AMI commands. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369905 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kinsey Moore	db59a3f123	Remove unnecessary generation of informational cause frames ... It is not necessary to generate information cause code frames on every protocol event that occurs. This removes all the instances where the frame was not conveying a cause code and was instead just conveying a protocol-specific message. This also corrects the generation of the message associated with disconnects for MFC/R2 to use the MFC/R2 specific text for the disconnect cause. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369765 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago