This patch is a re-do of r414122.
When r414122 was merged, a major problem with it was uncovered. UNBRIDGE soft
hangup flags have a catastrophic effect on the pbx core if they leak out from
the bridge layer: the channel gets hung up. With the number of threads
involved in a blind transfer, and with the initial patch, it was likely that
this would occur. This caused a large number of test failures
This patch is nearly identical with the one proposed in r414122, save for the
following changes:
- We explicitly clear the UNBRIDGE flag when setting an after goto on a
channel in a bridge
- Defensively, if we encounter an UNBRIDGE flag in the pbx core, we handle it
https://reviewboard.asterisk.org/r/3585/
........
Merged revisions 415443 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@415444 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If using the custom URI parsing code (not external uriparser lib) and there
was no query parameters the resulting pointer would be NULL and then an
attempt was made to subtract from it. The pointer is now set to a valid
value if there is no query parameter(s).
Also, in the 'ast_uri_make_host_with_port' function when setting the terminator
on the resulting string it was writing it one past the end of allocated memory.
It now writes the string terminator appropriately.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@415358 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The twisted logic determining if a config file should be reloaded was
mostly broken and disabled. The incorrect test that ASTERISK-23383 fixed
actually reenabled the broken logic. The incorrect test was causing the
timestamp to always be cleared which caused config files with includes to
always be reloaded.
* Made wildcard includes always cause a reload. Determining if a file was
deleted cannot be determined without restructuring the cache to determine
if any files are missing from the last files actually loaded. Also
without refactoring config_text_file_load(), the glob loop couldn't check
more than one file for changes anyway.
* Made remove the cache entry if the file no longer exists when trying to
get its timestamp or it is no longer a regular file. This fixes the
corner case where the file was loaded, then deleted, then the config
reloaded, then the file restored with the same timestamp, and then the
config reloaded again.
* Made remove the cache entry include list when actually loading the file.
This gets rid of any stale includes the file had from the last time the
file was loaded.
ASTERISK-23683 #close
Reported by: tootai
Review: https://reviewboard.asterisk.org/r/3575/
........
Merged revisions 415225 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 415229 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 415230 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@415231 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added a websocket server client in Asterisk. Asterisk has a websocket server,
but not a client. The ability to have Asterisk be able to connect to a websocket
server can potentially be useful for future work (for instance this could allow
ARI to connect back to some external system, although more work would be needed
in order to incorporate that).
Also a couple of things to note - proxy connection support has not been
implemented and there is limited http response code handling (basically, it is
connect or not).
Also added an initial new URI handling mechanism to core. Internet type URI's
are parsed into a data structure that contains pointers to the various parts of
the URI.
(closes issue ASTERISK-23742)
Reported by: Kevin Harwell
Review: https://reviewboard.asterisk.org/r/3541/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@415223 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds a new channel function TALK_DETECT that, when set on a
channel, causes events indicating the start/stop of talking on a channel to be
emitted to both AMI and ARI clients.
The function allows setting both the silence threshold (the length of silence
after which we decide no one is talking) as well as the talking threshold (the
amount of energy that counts as talking). Parameters can be updated on a channel
after talk detection has been enabled, and talk detection can be removed at
any time.
The events raised by the function use a nomenclature similar to existing AMI/ARI
events.
For AMI: ChannelTalkingStart/ChannelTalkingStop
For ARI: ChannelTalkingStarted/ChannelTalkingFinished
Review: https://reviewboard.asterisk.org/r/3563/
#ASTERISK-23786 #close
Reported by: Matt Jordan
........
Merged revisions 414934 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@414935 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch addresses some aesthetic issues in Asterisk. These are all just
minor tweaks to improve the look of the CLI when used in a variety of
settings. Specifically:
* A number of chatty verbose messages were removed or demoted to DEBUG
messages. Verbose messages with a verbosity level of 5 or higher were -
if kept as verbose messages - demoted to level 4. Several messages
that were emitted at verbose level 3 were demoted to 4, as announcement
of dialplan applications being executed occur at level 3 (and so the
effects of those applications should generally be less).
* Some verbose messages that only appear when their respective 'debug'
options are enabled were bumped up to always be displayed.
* Prefix/timestamping of verbose messages were moved to the verboser
handlers. This was done to prevent duplication of prefixes when the
timestamp option (-T) is used with the CLI.
* Verbose magic is removed from messages before being emitted to
non-verboser handlers. This prevents the magic in multi-line verbose
messages (such as SIP debug traces or the output of DumpChan) from
being written to files.
* _Slightly_ better support for the "light background" option (-W) was
added. This includes using ast_term_quit in the output of XML
documentation help, as well as changing the "Asterisk Ready" prompt to
bright green on the default background (which stands a better chance of
being displayed properly than bright white).
Review: https://reviewboard.asterisk.org/r/3547/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@414798 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a channel is destroyed (such as via ast_channel_release in off nominal
paths in core_unreal), it will attempt to free (via ast_free) the channel tech
pvt. This is problematic for a few reasons:
1. The channel tech pvt is an ao2 object in core_unreal. Free'ing the pvt
directly is no good.
2. The channel tech pvt's reference count is dropped just prior to calling
ast_channel_release, resulting in the pvt's destruction. Hence, the
channel destructor is free'ing an invalid pointer.
This patch keeps the dropping of the reference count, but sets the pvt to
NULL on the channel prior to releasing it. This models what would occur if the
channel was hung up directly.
........
Merged revisions 414542 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@414543 65c4cc65-6c06-0410-ace0-fbb531ad65f3
User events can now be generated from ARI. Events can be signalled with
arbitrary json variables, and include one or more of channel, bridge, or
endpoint snapshots. An application must be specified which will receive
the event message (other applications can subscribe to it). The message
will also be delivered via AMI provided a channel is attached. Dialplan
generated user event messages are still transmitted via the channel, and
will only be received by a stasis application they are attached to or if
the channel is subscribed to.
This change also introduces the multi object blob mechanism used to send
multiple snapshot types in a single message. The dialplan app UserEvent
was also changed to use multi object blob, and a new stasis message type
created to handle them.
ASTERISK-22697 #close
Review: https://reviewboard.asterisk.org/r/3494/
........
Merged revisions 414405 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@414406 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes res_corosync such that it works with Asterisk 12. This
restores the functionality that was present in previous versions of
Asterisk, and ensures compatibility with those versions by restoring the
binary message format needed to pass information from/to them.
The following changes were made in the core to support this:
* The event system has been partially restored. All event definition and
event types in this patch were pulled from Asterisk 11. Previously, we had
hoped that this information would live in res_corosync; however, the
approach in this patch seems to be better for a few reasons:
(1) Theoretically, ast_events can be used by any module as a binary
representation of a Stasis message. Given the structure of an ast_event
object, that information has to live in the core to be used universally.
For example, defining the payload of a device state ast_event in
res_corosync could result in an incompatible device state representation
in another module.
(2) Much of this representation already lived in the core, and was not
easily extensible.
(3) The code already existed. :-)
* Stasis message types now have a message formatter that converts their
payload to an ast_event object.
* Stasis message forwarders now handle forwarding to themselves. Previously
this would result in an infinite recursive call. Now, this simply creates a
new forwarding object with no forwards set up (as it is the thing it is
forwarding to). This is advantageous for res_corosync, as returning NULL
would also imply an unrecoverable error. Returning a subscription in this
case allows for easier handling of message types that are published directly
to an aggregate topic that has forwarders.
Review: https://reviewboard.asterisk.org/r/3486/
ASTERISK-22912 #close
ASTERISK-22372 #close
........
Merged revisions 414330 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@414331 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes issues with direct media bridges that occur after a blind
transfer. These issues were caught by the (currently failing)
pjsip/transfers/blind_transfer/caller_direct_media test.
The test currently fails primarily for two reasons:
(1) When Bob and Charlie (the transfer target and the transfer destination)
enter a bridge together, the framehook remains on the transfer target
channel until both channels are in the bridge. As it consumes voice frames,
the initial bridge type is a simple bridge. The framehook is removed when
both channels are in the bridge; however, this does not currently cause the
bridging framework to re-evaluate the bridge. This patch adds a
AST_SOFTHANGUP_UNBRIDGE poke to the transfer target channel when a
framehook is removed so the bridge can re-evaluate itself.
(2) When a channel leaves a native RTP bridge, it may be leaving due to being
hung up. Sending a re-INVITE to a channel that is about to be hung up is
not nice - in fact, there's a good chance we'll send the BYE request before
the channel has had a chance to send back a 200 OK. To be somewhat nicer,
this patch adds a function to channel.h that allows the bridging framework
to query for exactly why a channel is leaving a bridge via the channel's
soft hangup flags. This allows it to only send the re-INVITE if there's a
chance the channel will survive the native bridging experience.
Review: https://reviewboard.asterisk.org/r/3535/
........
Merged revisions 414122 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@414123 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In the past framehooks have had no capability to determine what frame types a hook
is actually interested in consuming. This has meant that code has had to assume they
want all frames, thus preventing native bridging.
This change adds a callback which allows a framehook to be queried for whether it
is consuming a frame of a specific type. The native RTP bridging module has also
been updated to take advantange of this, allowing native bridging to occur when
previously it would not.
ASTERISK-23497 #comment Reported by: Etienne Lessard
ASTERISK-23497 #close
Review: https://reviewboard.asterisk.org/r/3522/
........
Merged revisions 413681 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413682 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In the past framehooks have had no capability to determine what frame types a hook
is actually interested in consuming. This has meant that code has had to assume they
want all frames, thus preventing native bridging.
This change adds a callback which allows a framehook to be queried for whether it
is consuming a frame of a specific type. The native RTP bridging module has also
been updated to take advantange of this, allowing native bridging to occur when
previously it would not.
ASTERISK-23497 #comment Reported by: Etienne Lessard
ASTERISK-23497 #close
Review: https://reviewboard.asterisk.org/r/3522/
........
Merged revisions 413650 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413651 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed early exit in sip_msg_send() not destroying the message iterator.
* Made ast_msg_var_iterator_next() and ast_msg_var_iterator_destroy()
tolerant of a NULL iter parameter in case ast_msg_var_iterator_init()
fails.
* Made ast_msg_var_iterator_destroy() clean up any current message data
ref.
* Made struct ast_msg_var_iterator, ast_msg_var_iterator_init(),
ast_msg_var_iterator_next(), ast_msg_var_unref_current(), and
ast_msg_var_iterator_destroy() use iter instead of i.
* Eliminated RAII_VAR usage in res_pjsip_messaging.c:vars_to_headers().
........
Merged revisions 413139 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 413142 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413144 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When bridge locking was added for bridge snapshot creation, some
locations where bridge locking was added were not guaranteed to
actually have a bridge and locking NULL AO2 objects tends to cause
segfaults. This ensures that NULL bridges aren't locked.
........
Merged revisions 413073 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413074 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Backport -r411687 and fix the fix because content_length is the length of
out plus the length of the file controlled by fd.
When a response has an out content length of 0, fwrite would be called to
write a buffer with no data in it. This resulted in the following classic
error message:
[Apr 3 11:49:17] ERROR[26421] http.c: fwrite() failed: Success
This patch makes it so that we only attempt to write the content of out if
the out string is non-zero.
........
Merged revisions 412922 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 412923 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 412924 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412925 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For some odd reason, loading app_mixmonitor was fine, but res_monitor was not.
This patch fixes a set of issues related to func_periodic_hook exporting the
beep functions that gets res_monitor working again.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412910 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds the TCP_NODELAY option to accepted connections on the HTTP
server built into Asterisk. This option disables the Nagle algorithm
which controls queueing of outbound data and in some cases can cause
delays on receipt of response by the client due to how the Nagle
algorithm interacts with TCP delayed ACK. This option is already set on
all non-HTTP AMI connections and this change would cover standard HTTP
requests, manager HTTP connections, and ARI HTTP requests and
websockets in Asterisk 12+ along with any future use of the HTTP
server.
Review: https://reviewboard.asterisk.org/r/3466/
........
Merged revisions 412745 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 412748 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 412749 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412750 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When ASTERISK-23265/ASTERISK-23320 was fixed, it inadvertently led to realtime
features breaking. This was due to features loading prior to realtime. This
patch fixes this by loading features after loading dynamic modules.
ASTERISK-23487 #close
Reported by: Denis
Tested by: Denis
........
Merged revisions 412698 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412699 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Restore the reason value set by pbx_outgoing_attempt() to use
AST_CONTROL_xxx values as all the consumers were expecting rather than
cause codes.
* Fixed the dial routines to set cause codes for more than just
ast_request() so pbx_outgoing_attempt() reason codes will function.
* Fix inconsistent locked_channel return status in pbx_outgoing_attempt().
The chanel may not have been locked or the channel may have been a stale
pointer.
* Fixed the OutgoingSpoolFailed channel to run dialplan whenever the
dialing fails for an originate exten and 1 < synchronous.
* Fix incorrect ast_cond_wait() usage in pbx_outgoing_attempt().
Indroduced by issue ASTERISK-22212 patch.
* Made struct pbx_outgoing use the ao2 lock instead of its own lock for
the cond wait mutex. No sense in having two locks associated with the
same struct when only one is needed.
Review: https://reviewboard.asterisk.org/r/3421/
........
Merged revisions 412581 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412583 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed ast_channel_publish_dial_forward() not locking the forwarded
channel when taking the channel snapshot.
* Fixed app_dial.c:do_forward() using the wrong channel to get the
original call forwarding string.
* Removed unnecessary locking when calling ast_channel_publish_dial() and
ast_channel_publish_dial_forward() in app_dial and app_queue. Holding
channel locks when calling ast_channel_publish_dial_forward() with a
forwarded channel could result in pausing the system while the stasis bus
completes processsing a forwarded channel subscription.
Review: https://reviewboard.asterisk.org/r/3451/
........
Merged revisions 412579 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412580 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds a tones URI type to the playback resource. The tone can be specified by
name (from indications.conf) or by a tone pattern. In addition, tonezone can
be specified in the URI (by appending ;tonezone=<zone>). Tones must be
stopped manually in order for a stasis control to move on from playback of
the tone. Tones may be paused, resumed, restarted, and stopped. They may
not be rewound or fast forwarded (tones can't be controlled in a way that
lets you skip around from note to note and pausing and resuming will also
restart the tone from the beginning). Tests are currently in development
for this feature (https://reviewboard.asterisk.org/r/3428/).
(closes issue ASTERISK-23433)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3427/
........
Merged revisions 412535 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412536 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Remove unused RAII_VAR() declarations. The compiler cannot catch these
because the cleanup function "references" the unused variable. Some
actually allocated and released resources that were never used.
* Fixed some whitespace issues in stasis_bridges.c.
........
Merged revisions 412399 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412400 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The failing assertion ensures that the final snapshot gets generated so
CDR records can get finalized. The only place where a channel staging
snapshot flag could be left set is in chan_sip.c:handle_request_bye().
The function could return before clearing the flag because the channel
could dissappear while the function had to have the channel unlocked.
* Fixed handle_request_bye() channel snapshot staging coverage area to not
have a return in the middle of it and be unable to clear the staging flag.
* Pushed the channel snapshot staging coverage area into
ast_rtp_instance_set_stats_vars() to ensure that the staging is not
interrutped.
* Made callers of ast_rtp_instance_set_stats_vars() not call it with any
channels or channel driver private locks held to eliminate the deadlock
potential. The callers must hold references to the passed in channel and
rtp objects.
* Eliminated sip_hangup() trying to get the bridge peer. It is futile at
this point because the channel could never be in a bridge.
Review: https://reviewboard.asterisk.org/r/3431/
........
Merged revisions 412385 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412386 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
(1) It makes REF_DEBUG a meneselect item. Enabling REF_DEBUG now enables
REF_DEBUG globally throughout Asterisk.
(2) The ref debug log file is now created in the AST_LOG_DIR directory.
Every run will now blow away the previous run (as large ref files
sometimes caused issues). We now also no longer open/close the file
on each write, instead relying on fflush to make sure data gets written
to the file (in case the ao2 call being performed is about to cause a
crash)
(3) It goes with a comma delineated format for the ref debug file. This
makes parsing much easier. This also now includes the thread ID of the
thread that caused ref change.
(4) A new python script instead for refcounting has been added in the
contrib/scripts folder.
(5) The old refcounter implementation in utils/ has been removed.
Review: https://reviewboard.asterisk.org/r/3377/
........
Merged revisions 412114 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 412115 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 412153 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412154 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The masquerade supertest frequently fails because either the local channel
chain doesn't completely optimize out or the DTMF handshake doesn't
completely get accross. Local channel optimization requires frames
flowing to trigger when optimization can happen. When optimization
happens the media frame that triggered the optimization is dropped.
Sending DTMF requires frames to flow in the other direction for timing
purposes while sending nothing. If internal timing is not enabled when
MOH is playing, Asterisk switches to received timing when an audio frame
is received. With optimization dropping media frames and MOH not sending
frames unless it receives frames, occasionaly there are no more frames
being passed and the test fails.
* The asterisk command line -I option and the asterisk.conf
internal_timing option are removed. Asterisk now always uses internal
timing when needed if any timing module is loaded. The issue
ASTERISK-14861 did this quite awhile ago in v1.4 but effectively is broken
if other internal timing modules besides DAHDI are used. The
ast_read_generator_actions() now only does received timing if it has no
choice for frame generators like MOH, silence, and playback streaming.
* Cleaned up some code dealing with frame generators in
ast_deactivate_generator(), generator_write_format_change(),
ast_activate_generator(), and ast_channel_stop_silence_generator().
* Removed ast_internal_timing_enabled(), AST_OPT_FLAG_INTERNAL_TIMING, and
ast_opt_internal_timing.
ASTERISK-22846 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3414/
........
Merged revisions 411715 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 411716 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 411717 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411724 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Assert if a channel is destroyed but has the snapshot staging flag set.
In this case the final channel destruction snapshot would never get taken.
* Assert if what we just got out of the stasis cache is not what we were
looking for. This assert would have saved several days searching for a
bug and a lot of my hair.
* Assert if the music on hold message posts could not find the associated
channel. A crash will happen later when manager tries to send the MOH AMI
message. This assert catches the problem when the stasis message is
posted instead of by the thread processing the defective message.
* Always generate a backtrace when an ast_assert() fails.
Review: https://reviewboard.asterisk.org/r/3411/
........
Merged revisions 411701 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411702 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a response has a content length of 0, fwrite would be called to write a
buffer with no data in it. This resulted in the following classic error
message:
[Apr 3 11:49:17] ERROR[26421] http.c: fwrite() failed: Success
This patch makes it so that we only attempt to write out the content if the
calculated content_length is non-zero.
........
Merged revisions 411687 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411688 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit contains several changes to sorcery:
1) Application of sorcery configuration based on module name is automatically performed
when sorcery is opened for a module.
2) Sorcery will not attempt to apply the same wizard to an object type more than once.
3) Sorcery gives more exact results when attempting to apply a wizard, whether as the
default or based on configuration.
Sorcery unit tests still pass for me after making these changes.
Review: https://reviewboard.asterisk.org/r/3326
........
Merged revisions 411159 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411656 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch works around a problem with the HTTP body
being dropped from the response to a specific client
and under specific circumstances:
a) Client request comes from node.js user agent
"Shred" via use of swagger-client library.
b) Asterisk and Client are *not* on the same
host or TCP/IP stack
In testing this problem, it has been determined that
the write of the HTTP body is lost, even if the data
is written using low level write function. The only
solution found is to instruct the TCP stack with the
shutdown function to flush the last write and finish
the transmission. See review for more details.
ASTERISK-23548 #close
(closes issue ASTERISK-23548)
Reported by: Sam Galarneau
Review: https://reviewboard.asterisk.org/r/3402/
........
Merged revisions 411462 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 411463 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 411465 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411469 65c4cc65-6c06-0410-ace0-fbb531ad65f3
On graceful shutdown, sorcery wizards are all killed off, but it is
possible for sorcery instances to still have dangling pointers after
this, possibly causing a crash. Giving the sorcery instances a reference
to their wizards ensures that the wizard reference will remain valid for
the lifetime of the sorcery instance.
Review: https://reviewboard.asterisk.org/r/3401
........
Merged revisions 411295 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411296 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix memory leak in ast_unreal_new_channels(). Made it generate the ;2
uniqueid on a stack variable instead of mallocing it.
* Made send error response to ARI and AMI requests instead of just logging
excessive uniqueid length and allowing truncation. action_originate() and
ari_channels_handle_originate_with_id().
* Fixed minor truncating uniqueid hole when generating the ;2 uniqueid
string length. Created public and internal lengths of uniqueid. The
internal length can handle a max public uniqueid plus an appended ;2.
* free() and ast_free() are NULL tolerant so they don't need a NULL test
before calling.
* Made use better struct initialization format instead of the position
dependent initialization format. Also anything not explicitly initialized
in the struct is initialized to zero by the compiler.
* Made ast_channel_internal_set_fake_ids() use the safer
ast_copy_string() instead of strncpy().
Review: https://reviewboard.asterisk.org/r/3371/
........
Merged revisions 410949 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410950 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a request was received with a Content-type of json,
the body was sent for json parsing - even if it was zero
length. This resulted in ARI requests failing that were
valid, such as a channel DELETE with no parameters. The
code has now been changed to skip json parsing with zero
content length.
(closes issue SWP-6748)
Reported by: Samuel Galarneau
Review: https://reviewboard.asterisk.org/r/3360/
........
Merged revisions 410858 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410863 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In the CDR core, every channel should either be filtered out (due to being an
'internal' channel used as an implementation detail, such as playing media
back into a bridge) or it should get a CDR. Even if that CDR ends up being
discarded, we still give the channel a CDR in case we end up needing it. If we
hit a situation where a channel does not have a CDR, we should blow up in
-dev-mode. Asserts are appropriate for that.
This patch adds those asserts, as they would have quickly caught the error
fixed by r410814.
........
Merged revisions 410861 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410862 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change enables DNS client support within PJSIP. System
nameservers are automatically discovered using res_init or
res_ninit. If this fails then PJSIP will resort to using
gethostbyname for resolution.
By enabling this support we gain SRV support, failover, and
weight support.
(closes issue ASTERISK-23435)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3343/
........
Merged revisions 410795 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410796 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Callerid checksum-ing was being handled incorrectly here. When the checksum is
calculated to be 0x00, it will perform 0x100-0x00 which results in 0x100. This
value will then fail the otherwise correct callerid message.
This patch changes the logic to simply add the calculated checksum to the
transmitted 2's compliment checksum.
Review: https://reviewboard.asterisk.org/r/3356/
(closes issue ASTERISK-23488)
........
This is a merge of merged revisions 410750 410747 from http://svn.asterisk.org/svn/asterisk/branches/12
I didn't want a broken patch to be comitted to trunk so I pre-merge merged them.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410775 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Playing back a file to a channel in an ARI bridge would attempt to wait until
the playback concluded before returning. The method used involved signaling the
waiting thread in the ARI custom playback function.
The problem with this is that there were some corner cases that were not accounted for:
* If a bridge channel could not be found, then we never would attempt the playback but
would still attempt to wait for the playback to complete.
* If the bridge playfile action failed to queue, we would still attempt to wait for the
playback to complete.
* If the bridge playfile action were queued but some circumstance caused the playback
not to occur (the bridge dies, the channel is removed from the bridge), then we would
never be notified.
The solution to this is to move the waiting logic into the bridge code. A new bridge
API function is added to queue a synchronous action on a bridge. The waiting thread
is notified when the queued frame has been freed, either due to an error occurring
or due to successful playback. As a failsafe, the waiting thread has a 10 minute
timeout just in case there is a frame leak somewhere.
Review: https://reviewboard.asterisk.org/r/3338
........
Merged revisions 410673 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410684 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Realtime backends' update and store callbacks return the number of rows affected,
or -1 if there was a failure. There were a couple of issues:
* The config API was treating 0 as a successful return, and positive values as
a failure. Now the config API treats anything >= 0 as a success.
* res_sorcery_realtime was treating 0 as a successful return from the store
procedure, and any positive values as a failure. Now sorcery treats anything
> 0 as a success. It still considers 0 a "failure" since there is no change
to report to observers.
Review: https://reviewboard.asterisk.org/r/3341
........
Merged revisions 410592 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410593 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The syncing thread sleeps for a second before waiting to be
told to attempt to sync again. If a signal were sent during this
sleeping period, we would end up having to wait until the next
sync signal occurred in order to sync up the astdb.
This code rearrangement also ensures that any pending transactions
will be synced prior to Asterisk shutting down.
Patches: db_sync.patch by John Hardin (License #6512)
........
Merged revisions 410556 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 410559 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410567 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Made res_musiconhold.c always post the MusicOnHoldStart/MusicOnHoldStop
events when it actually starts/stops the music streams. This allows the
events to always happen when MOH starts/stops. The event posting code was
moved to the MOH alloc/release routines.
* Made channel_do_masquerade() stop any MOH on the original channel before
masquerading so the original channel will get a stop event with correct
information.
* Cleaned up a couple odd codings in moh_files_alloc() and moh_alloc()
dealing with the music state variable.
(issue ASTERISK-23311)
Reported by: Benjamin Keith Ford
Review: https://reviewboard.asterisk.org/r/3306/
........
Merged revisions 410493 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410494 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Created the 'pjsip show channel' and 'pjsip show contact' commands.
Refactored out the hated ast_hashtab. Replaced with ao2_container.
Cleaned up function naming. Internal only, no public name changes.
Cleaned up whitespace and brace formatting in cli code.
Changed some NULL checking from "if"s to ast_asserts.
Fixed some register/unregister ordering to reduce deadlock potential.
Fixed ast_sip_location_add_contact where the 'name' buffer was too short.
Fixed some self-assignment issues in res_pjsip_outbound_registration.
(closes issue ASTERISK-23276)
Review: http://reviewboard.asterisk.org/r/3283/
........
Merged revisions 410287 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410288 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The config option help information has always parsed the <see-also> tags in the
XML documentation. Unfortunately, it just never bothered displaying them on
the CLI. With this patch, when you execute 'config show help [module] [obj]
[option]', it will display what other options are useful to you.
(closes issue ASTERISK-22008)
Reported by: Richard Mudgett
........
Merged revisions 410209 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410210 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In order to prevent confusion over the allow and disallow
list of codecs being the same an option for registering a
field as an alias is added. The alias field will be read
from the configuration file, but afterwards is not listed
as a known field. With disallow set as an alias, the CLI
command pjsip show endpoint # will list the allow= field,
but not the disallow field.
(closes issue ASTERISK-23092)
Review: https://reviewboard.asterisk.org/r/3193/
........
Merged revisions 410190 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410191 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A stasis cache entry now contains more than a single message/snapshot. It
contains messages/snapshots for the local entity as well as any remote
entities that post to the cached item. In addition callbacks can be
supplied when the cache is created to compute and post the aggregate
message/snapshot representing all entities stored in the cache entry.
* All stasis messages now have an eid to indicate what entity posted it.
* The stasis cache enhancements allow device state to cache and aggregate
the device states from local and remote entities in a single operation.
The cached aggregate device state is available immediately after it is
posted to the stasis bus. This improves performance by eliminating a
cache dump and associated ao2 container traversals to calculate the
aggregate state.
(closes issue ASTERISK-23204)
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/3281/
........
Merged revisions 410184 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410185 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Much needed was a way to assign id to objects on creation, and
much change was necessary to accomplish it. Channel uniqueids
and linkedids are split into separate string and creation time
components without breaking linkedid propgation. This allowed
the uniqueid to be specified by the user interface - and those
values are now carried through to channel creation, adding the
assignedids value to every function in the chain including the
channel drivers. For local channels, the second channel can be
specified or left to default to a ;2 suffix of first. In ARI,
bridge, playback, and snoop objects can also be created with a
specified uniqueid.
Along the way, the args order to allocating channels was fixed
in chan_mgcp and chan_gtalk, and linkedid is no longer lost as
masquerade occurs.
(closes issue ASTERISK-23120)
Review: https://reviewboard.asterisk.org/r/3191/
........
Merged revisions 410157 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410158 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch creates the AST_SORCERY dialplan function which allows someone to
retrieve any value from a sorcery-based config file. It's similar to
AST_CONFIG.
The creation of the function itself was fairly straightforward but it required
changes to the underlying sorcery infrastructure that rippled into individual
sorcery objects. The changes stemmed from inconsistencies in how sorcery
created ast_variable objectsets from sorcery objects and the inconsistency
in how individual objects used that feature especially when it came to
parameters that can be specified multiple times like contact in aor and match
in identify. You can read more here...
http://lists.digium.com/pipermail/asterisk-dev/2014-February/065202.html
So, what this patch does, besides actually creating the AST_SORCERY function,
is the following...
* Creates ast_variable_list_append which is a helper to append one ast_variable
list to another.
* Modifies the ast_sorcery_object_field_register functions to accept the
already-defined sorcery_fields_handler callback.
* Modifies ast_sorcery_objectset_create to accept a parameter indicating return
type preference...a single ast_variable with all values concatenated or an
ast_variable list with multiple entries. Also fixed a few bugs.
* Modifies individual sorcery object implementations to use the new function
definition of the ast_sorcery_object_field_register functions.
* Modifies location.c and res_pjsip_endpoint_identifier_ip.c to implement
sorcery_fields_handler handlers so they return multiple occurrences as an
ast_variable_list.
* Added a whole bunch of tests to test_sorcery.
(closes issue ASTERISK-22537)
Review: http://reviewboard.asterisk.org/r/3254/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410042 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Transport TOS values were interpreted as DSCP values without being documented
as such. Endpoint TOS values (tos_audio/tos_video) behaved normally as TOS
values have historically. This patch makes the transport TOS values behave as
TOS values and makes all TOS values readable as string values (e.g. AF11).
In addition, alembic scripts have been updated to use the proper field types
for all TOS/COS values.
(issue ASTERISK-23235)
Reported by: George Joseph
Review: https://reviewboard.asterisk.org/r/3304/
........
Merged revisions 410028 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410029 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Remove some unnecessary RAII_VAR() usage.
* Made the struct stasis_subscription ao2 object use the ao2 lock instead
of a redundant join_lock in the struct for ast_cond_wait().
* Removed locks on some ao2 objects that don't need the lock.
* Made the topic pool entries container use the ao2 template functions.
* Add some missing allocation failure checks.
* Add missing cleanup in off nominal path of dispatch_message().
........
Merged revisions 409270 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@409271 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It is possible to pre-load pbx_config. As a result, pbx_config - which will
load and parse the dialplan - will attempt to use various dialplan components,
such as device state providers and presence state providers, prior to them
being initialized by the core. This would lead to a crash, as the components
had not created their Stasis cache entries.
This patch moves a number of core component initializations before the module
pre-load. This guarantees that if someone does pre-load pbx_config - or other
pbx modules - that the Stasis caches for the various core components are
created.
(closes issue ASTERISK-23320)
Reported by: xrobau
(closes issue ASTERISK-23265)
Reported by: Andrew Nagy
Tested by: Andrew Nagy, Rusty Newton
........
Merged revisions 408855 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@408859 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Matthew Jordan
Jonathan Rose
Kevin Harwell
George Joseph
Richard Mudgett
Kinsey Moore
Scott Griepentrog
Walter Doekes
Joshua Colp
Mark Michelson
Olle Johansson
Russell Bryant
Corey Farrell
Sean Bright
Russ Meyerriecks
David M. Lee