1076 Commits (363d61ef588a3782cde94f0050a2c58b900592a7)

Author	SHA1	Message	Date
George Joseph	363d61ef58	configure: Add --with-download-cache option ... To make building without an internet connection easier, a new ./configure option '--with-download-cache' was added that sets the cache for externals (like pjproject, the codecs and the DPMA), AND the sounds files. It can also be specified as an environment variable named "AST_DOWNLOAD_CACHE". The existing '--with-sounds-cache' option / SOUNDS_CACHE_DIR env variable and '--with-externals-cache' option / EXTERNALS_CACHE_DIR env variable remain and if specified, will override '--with-downloads-cache'. Change-Id: I5c3cf15ee61e8fe191b52732303e969854f8d861	8 years ago
Niklas Larsson	9a09f7dd5d	app_queue: Add priority to AMI QueueStatus ... Add priority to callers in AMI QueueStatus response ASTERISK-27092 #close Change-Id: I8d1f737a72c7c38f4cfe1a4ee3ecc0a4f85bd199	8 years ago
Joshua Colp	114602f434	res_pjsip: Add support for dnsmgr to external_media_address. ... The "external_media_address" option on transports is now resolved using dnsmgr. This allows it to be automatically refreshed regularly if refreshes are enabled in dnsmgr. If the system is using a dynamic IP address a dynamic DNS hostname can be provided to keep the IP address up to date. Change-Id: Ia54771720dff0105bde55d5bbb81a3ba437e05b2	8 years ago
Torrey Searle	423d01cf16	chan_pjsip: add a new function PJSIP_DTMF_MODE ... This function is a replica of SIPDtmfMode, allowing the DTMF mode of a PJSIP call to be modified on a per-call basis ASTERISK-27085 #close Change-Id: I20eef5da3e5d1d3e58b304416bc79683f87e7612	8 years ago
Joshua Colp	24bb5a8908	core: Add VP9 passthrough support. ... This change adds VP9 as a known codec and creates a cached "vp9" media format for use. Change-Id: I025a93ed05cf96153d66f36db1839109cc24c5cc	8 years ago
George Joseph	4e555437dc	res_musiconhold: Add kill_escalation_delay, kill_method to class ... By default, when res_musiconhold reloads or unloads, it sends a HUP signal to custom applications (and all descendants), waits 100ms, then sends a TERM signal, waits 100ms, then finally sends a KILL signal. An application which is interacting with an external device and/or spawns children of its own may not be able to exit cleanly in the default times, expecially if sent a KILL signal, or if it's children are getting signals directly from res_musiconhoild. * To allow extra time, the 'kill_escalation_delay' class option can be used to set the number of milliseconds res_musiconhold waits before escalating kill signals, with the default being the current 100ms. * To control to whom the signals are sent, the "kill_method" class option can be set to "process_group" (the default, existing behavior), which sends signals to the application and its descendants directly, or "process" which sends signals only to the application itself. Change-Id: Iff70a1a9405685a9021a68416830c0db5158603b	8 years ago
George Joseph	bbe68f139d	pjproject_bundled: Allow passing configure options to bundled ... There wasn't any good way to pass options like --host or --build down to the pjproject configure which makes cross-compiling difficult. * Added a new PJPROJECT_CONFIGURE_OPTS environment variable which can be used to pass arbitrary options to pjproject configure. * Automatically set the pjproject configure --host and --build options to match those supplied for the asterisk configure. ASTERISK-27097 #close Reported-by: Kinsey Moore Change-Id: I5fa776e110262851173002a26ffe1172e4c35b2e	8 years ago
Jenkins2	997c11235e	Merge "app_voicemail: IMAP connection control" into 13	8 years ago
Torrey Searle	9fbc34d2bd	res_pjsip: Add DTMF INFO Failback mode ... The existing auto dtmf mode reverts to inband if 4733 fails to be negotiated. This patch adds a new mode auto_info which will switch to INFO instead of inband if 4733 is not available. ASTERISK-27066 #close Change-Id: Id185b11e84afd9191a2f269e8443019047765e91	8 years ago
Alexei Gradinari	8f356192d1	app_voicemail: IMAP connection control ... A new global option "imap_poll_logout" was added to specify whether need to disconnect from the IMAP server after polling of mailboxes. ASTERISK-27068 #close Closing IMAP connection after loading mailbox from voicemail.conf ASTERISK-24052 #close Change-Id: Ib7558ba04516240a32b65f42e9be64372a0ae12a	8 years ago
Jenkins2	707e0e62e6	Merge "res_pjsip: New endpoint option "notify_early_inuse_ringing"" into 13	8 years ago
Alexei Gradinari	a6e4899612	res_pjsip: New endpoint option "notify_early_inuse_ringing" ... This option was added to control whether to notify dialog-info state 'early' or 'confirmed' on Ringing when already INUSE. The value "yes" is useful for some SIP phones (Cisco SPA) to be able to indicate and pick up ringing devices. ASTERISK-26919 #close Change-Id: Ie050bc30023543c7dfb4365c5be3ce58c738c711	8 years ago
Joshua Colp	bc51d4324a	Merge "pjsip: Extend 'asymmetric_rtp_codec' option to include us changing." into 13	8 years ago
Alexei Gradinari	5520b6c201	CHANGES: correct version for a new option 'refer_blind_progress' ... Change-Id: If4817d26a8974610827624fb8a4e56d681d6bf97	8 years ago
Joshua Colp	996a4791ff	pjsip: Extend 'asymmetric_rtp_codec' option to include us changing. ... PJSIP support in Asterisk differs from chan_sip in that it allows media to be sent as-is without transcoding provided the codecs were negotiated in the SDP. This is allowed according to the RFC. Support for this differs quite a lot though and some endpoints do not handle it well. This change extends the 'asymmetric_rtp_codec' option to also cover this case. When set to no (the default) the code behaves as chan_sip does - the best codec is selected and we will only ever send that, unless we change what we are sending if the remote side changes. When set to yes we will send media as-is without transcoding if the codec has been negotiated in the SDP. ASTERISK-26996 Change-Id: Ib1647f6902a0843e8c435946f831c2159e8d1d51	8 years ago
Jenkins2	812f5b51cb	Merge "res_pjsip: Add support for returning only reachable contacts and use it." into 13	8 years ago
Joshua Colp	746c2c5745	res_pjsip: Add support for returning only reachable contacts and use it. ... This introduces the ability for PJSIP code to specify filtering flags when retrieving PJSIP contacts. The first flag for use causes the query code to only retrieve contacts that are not unreachable. This change has been leveraged by both the Dial() process and the PJSIP_DIAL_CONTACTS dialplan function so they will now only attempt calls to contacts which are not unreachable. ASTERISK-26281 Change-Id: I8233b4faa21ba3db114f5a42e946e4b191446f6c	8 years ago
Jenkins2	3e8eea0325	Merge "res_pjsip: New endpoint option "refer_blind_progress"" into 13	8 years ago
Sean Bright	90237dca11	res_agi: Allow configuration of audio format of EAGI pipe ... This change allows the format of the EAGI audio pipe to be changed by setting the dialplan variable 'EAGI_AUDIO_FORMAT' to the name of one of the loaded formats. ASTERISK-26124 #close Change-Id: I7a10fad401ad2a21c68c2e7246fa357d5cee5bbd	8 years ago
Alexei Gradinari	6af2dd34af	res_pjsip: New endpoint option "refer_blind_progress" ... This option was added to turn off notifying the progress details on Blind Transfer. If this option is not set then the chan_pjsip will send NOTIFY "200 OK" immediately after "202 Accepted". Some SIP phones like Mitel/Aastra or Snom keep the line busy until receive "200 OK". ASTERISK-26333 #close Change-Id: Id606fbff2e02e967c02138457badc399144720f2	8 years ago
Jenkins2	6383d9214a	Merge "res_hep_rtcp: Provide chan_sip Call-ID for RTCP messages." into 13	8 years ago
Joshua Colp	10a49ab362	res_hep_rtcp: Provide chan_sip Call-ID for RTCP messages. ... This change adds the required logic to allow the SIP Call-ID to be placed into the HEP RTCP traffic if the chan_sip module is used. In cases where the option is enabled but the channel is not either SIP or PJSIP then the code will fallback to the channel name as done previously. Based on the change on Nir's branch at: team/nirs/hep-chan-sip-support ASTERISK-26427 Change-Id: I09ffa5f6e2fdfd99ee999650ba4e0a7aad6dc40d	8 years ago
George Joseph	7d4a22bf2e	logger: Added logger_queue_limit to the configuration options. ... All log messages go to a queue serviced by a single thread which does all the IO. This setting controls how big that queue can get (and therefore how much memory is allocated) before new messages are discarded. The default is 1000. Should something go bezerk and log tons of messages in a tight loop, this will prevent memory escalation. When the limit is reached, a WARNING is logged to that effect and messages are discarded until the queue is empty again. At that time another WARNING will be logged with the count of discarded messages. There's no "low water mark" for this queue because the logger thread empties the entire queue and processes it in 1 batch before going back and waiting on the queue again. Implementing a low water mark would mean additional locking as the thread processes each message and it's not worth it. A "test" was added to test_logger.c but since the outcome is non-deterministic, it's really just a cli command, not a unit test. Change-Id: Ib4520c95e1ca5325dbf584c7989ce391649836d1	8 years ago
Richard Mudgett	cd80af508e	res_rtp_asterisk.c: Add stun_blacklist option ... Added the stun_blacklist option to rtp.conf. Some multihomed servers have IP interfaces that cannot reach the STUN server specified by stunaddr. Blacklist those interface subnets from trying to send a STUN packet to find the external IP address. Attempting to send the STUN packet needlessly delays processing incoming and outgoing SIP INVITEs because we will wait for a response that can never come until we give up on the response. Multiple subnets may be listed. ASTERISK-26890 #close Change-Id: I3ff4f729e787f00c3e6e670fe6435acce38be342	8 years ago
George Joseph	a827892ff7	res_pjsip_config_wizard: Add 2 new parameters to help with proxy config ... Two new parameters have been added to the pjsip config wizard. * Setting 'sends_line_with_registrations' to true will cause the wizard to skip the creation of an identify object to match incoming request to the endpoint and instead add the line and endpoint parameters to the outbound registration object. * Setting 'outbound_proxy' is a shortcut for adding individual endpoint/outbound_proxy, aor/outbound_proxy and registration/outbound_proxy parameters. Change-Id: I678e5f80765734c056620528a6d40d82736ceeb0	8 years ago
zuul	4fcb8d807e	Merge "CHANNEL(callid): Give dialplan access to the callid." into 13	8 years ago
Richard Begg	398e5ec16c	res_pjsip_session: Enable RFC3578 overlap dialing support. ... Support for RFC3578 overlap dialling (i.e. 484 Response to partially matched destinations) as currently provided by chan_sip is missing from res_pjsip. This patch adds a new endpoint attribute (allow_overlap) [defaults to yes] which when set to yes enables 484 responses to partial destination matches rather than the current 404. ASTERISK-26864 Change-Id: Iea444da3ee7c7d4f1fde1d01d138a3d7b0fe40f6	8 years ago
Richard Mudgett	60b372a883	CHANNEL(callid): Give dialplan access to the callid. ... * Added CHANNEL(callid) to retrieve the call identifier log tag associated with the channel. Dialplan now has access to the call log search key associated with the channel so it can be saved in case there is a problem with the call. ASTERISK-26878 Change-Id: I2c97ebd928b6f3c5bc80c5729e4d3c07f453049f	8 years ago
George Joseph	9b756662a8	res_pjsip: Symmetric transports ... A new transport parameter 'symmetric_transport' has been added. When a request from a dynamic contact comes in on a transport with this option set to 'yes', the transport name will be saved and used for subsequent outgoing requests like OPTIONS, NOTIFY and INVITE. It's saved as a contact uri parameter named 'x-ast-txp' and will display with the contact uri in CLI, AMI, and ARI output. On the outgoing request, if a transport wasn't explicitly set on the endpoint AND the request URI is not a hostname, the saved transport will be used and the 'x-ast-txp' parameter stripped from the outgoing packet. * config_transport was modified to accept and store the new parameter. * config_transport/transport_apply was updated to store the transport name in the pjsip_transport->info field using the pjsip_transport->pool on UDP transports. * A 'multihomed_on_rx_message' function was added to pjsip_message_ip_updater that, for incoming requests, retrieves the transport name from pjsip_transport->info and retrieves the transport. If transport->symmetric_transport is set, an 'x-ast-txp' uri parameter containing the transport name is added to the incoming Contact header. * An 'ast_sip_get_transport_name' function was added to res_pjsip. It takes an ast_sip_endpoint and a pjsip_sip_uri and returns a transport name if endpoint->transport is set or if there's an 'x-ast-txp' parameter on the uri and the uri host is an ipv4 or ipv6 address. Otherwise it returns NULL. * An 'ast_sip_dlg_set_transport' function was added to res_pjsip which takes an ast_sip_endpoint, a pjsip_dialog, and an optional pjsip_tpselector. It calls ast_sip_get_transport_name() and if a non-NULL is returned, sets the selector and sets the transport on the dialog. If a selector was passed in, it's updated. * res_pjsip/ast_sip_create_dialog_uac and ast_sip_create_dialog_uas were modified to call ast_sip_dlg_set_transport() instead of their original logic. * res_pjsip/create_out_of_dialog_request was modified to call ast_sip_get_transport_name() and pjsip_tx_data_set_transport() instead of its original logic. * Existing transport logic was removed from endpt_send_request since that can only be called after a create_out_of_dialog_request. * res_pjsip/ast_sip_create_rdata was converted to a wrapper around a new 'ast_sip_create_rdata_with_contact' function which allows a contact_uri to be specified in addition to the existing parameters. (See below) * res_pjsip_pubsub/internal_pjsip_evsub_send_request was eliminated since all it did was transport selection and that is now done in ast_sip_create_dialog_uac and ast_sip_create_dialog_uas. * 'contact_uri' was added to subscription_persistence. This was necessary because although the parsed rdata contact header has the x-ast-txp parameter added (if appropriate), subscription_persistence_update stores the raw packet which doesn't have it. subscription_persistence_recreate was then updated to call ast_sip_create_rdata_with_contact with the persisted contact_uri so the recreated subscription has the correct transport info to send the NOTIFYs. * res_pjsip_session/internal_pjsip_inv_send_msg was eliminated since all it did was transport selection and that is now done in ast_sip_create_dialog_uac. * pjsip_message_ip_updater/multihomed_on_tx_message was updated to remove all traces of the x-ast-txp parameter from the outgoing headers. NOTE: This change does NOT modify the behavior of permanent contacts specified on an aor. To do so would require that the permanent contact's contact uri be updated with the x-ast-txp parameter and the aor sorcery object updated. If we need to persue this, we need to think about cloning permanent contacts into the same store as the dynamic ones on an aor load so they can be updated without disturbing the originally configured value. You CAN add the x-ast-txp parameter to a permanent contact's uri but it would be much simpler to just set endpoint->transport. Change-Id: I4ee1f51473da32ca54b877cd158523efcef9655f	8 years ago
Mark Michelson	7bc69753bc	Add rtcp-mux support ... This commit adds support for RFC 5761: Multiplexing RTP Data and Control Packets on a Single Port. Specifically, it enables the feature when using chan_pjsip. A new option, "rtcp_mux" has been added to endpoint configuration in pjsip.conf. If set, then Asterisk will attempt to use rtcp-mux with whatever it communicates with. Asterisk follows the rules set forth in RFC 5761 with regards to falling back to standard RTCP behavior if the far end does not indicate support for rtcp-mux. The lion's share of the changes in this commit are in res_rtp_asterisk.c. This is because it was pretty much hard wired to have an RTP and an RTCP transport. The strategy used here is that when rtcp-mux is enabled, the current RTCP transport and its trappings (such as DTLS SSL session) are freed, and the RTCP session instead just mooches off the RTP session. This leads to a lot of specialized if statements throughout. ASTERISK-26732 #close Reported by Dan Jenkins Change-Id: If46a93ba1282418d2803e3fd7869374da8b77ab5	8 years ago
Matt Jordan	b3c2c996f1	res_pjsip_endpoint_identifier_ip: Add an option to match requests by header ... This patch adds a new features to the endpoint identifier module, 'match_header'. When set, inbound requests are matched by a provided SIP header: value pair. This option works in conjunction with the existing 'match' configuration option, such that if any 'match*' attribute matches an inbound request, the request is associated with the specified endpoint. Since this module now identifies by more than just IP address, appropriate renaming of the module and/or variables can be done in a non-release branch. ASTERISK-26863 #close Change-Id: Icfc14835c962f92e35e67bbdb235cf0589de5453 (cherry picked from commit 30f52d79d7)	8 years ago
Daniel Journo	bc6eeab822	app_voicemail: Cannot set fromstring on a per-mailbox basis ... * apps/app_voicemail.c fromstring field added to mailbox which will override the global fromstring if set. ASTERISK-24562 #close Change-Id: I5e90e3a1ec2b2d5340b49a0db825e4bbb158b2fe	8 years ago
Joshua Colp	75ebd8f0d2	Merge "res_pjsip WebRTC/websockets: Fix usage of WS vs WSS." into 13	8 years ago
Jørgen H	e510595c86	res_pjsip WebRTC/websockets: Fix usage of WS vs WSS. ... According to the RFC[1] WSS should only be used in the Via header for secure Websockets. * Use WSS in Via for secure transport. * Only register one transport with the WS name because it would be ambiguous. Outgoing requests may try to find the transport by name and pjproject only finds the first one registered. This may mess up unsecure websockets but the impact should be minimal. Firefox and Chrome do not support anything other than secure websockets anymore. * Added and updated some debug messages concerning websockets. * security_events.c: Relax case restriction when determining security transport type. * The res_pjsip_nat module has been updated to not touch the transport on Websocket originating messages. [1] https://tools.ietf.org/html/rfc7118 ASTERISK-26796 #close Change-Id: Ie3a0fb1a41101a4c1e49d875a8aa87b189e7ab12	8 years ago
George Joseph	c07bcca87e	res_pjsip_outbound_registration: Subscribe to network change events ... Outbound registration now subscribes to network change events published by res_stun_monitor and refreshes all registrations when an event happens. The 'pjsip send (un)register' CLI commands were updated to accept '*all' as an argument to operate on all registrations. The 'PJSIP(Un)Register' AMI commands were also updated to accept '*all'. ASTERISK-26808 #close Change-Id: Iad58a9e0aa5d340477fca200bf293187a6ca5a25	8 years ago
Sean Bright	4c31e03e80	app_voicemail: Allow 'Comedian Mail' branding to be overriden ... Original patch by John Covert, slight modifications by me. ASTERISK-17428 #close Reported by: John Covert Patches: app_voicemail.c.patch (license #5512) patch uploaded by John Covert Change-Id: Ic3361b0782e5a5397a19ab18eb8550923a9bd6a6	8 years ago
Sean Bright	f99e5f4de4	app_record: Add option to prevent silence from being truncated ... When using Record() with the silence detection feature, the stream is written out to the given file. However, if only 'silence' is detected, this file is then truncated to the first second of the recording. This patch adds the 'u' option to Record() to override that behavior. ASTERISK-18286 #close Reported by: var Patches: app_record-1.8.7.1.diff (license #6184) patch uploaded by var Change-Id: Ia1cd163483235efe2db05e52f39054288553b957	8 years ago
George Joseph	17f4989d49	ari: Implement 'debug all' and request/response logging ... The 'ari set debug' command has been enhanced to accept 'all' as an application name. This allows dumping of all apps even if an app hasn't registered yet. To accomplish this, a new global_debug global variable was added to res/stasis/app.c and new APIs were added to set and query the value. 'ari set debug' now displays requests and responses as well as events. This required refactoring the existing debug code. * The implementation for 'ari set debug' was moved from stasis/cli.{c,h} to ari/cli.{c,h}, and stasis/cli.{c,h} were deleted. * In order to print the body of incoming requests even if a request failed, the consumption of the body was moved from the ari stubs to ast_ari_callback in res_ari.c and the moustache templates were then regenerated. The body is now passed to ast_ari_invoke and then on to the handlers. This results in code savings since that template was inserted multiple times into all the stubs. An additional change was made to the ao2_str_container implementation to add partial key searching and a sort function. The existing cli code assumed it was already there when it wasn't so the tab completion was never working. Change-Id: Ief936f747ce47f1fb14035fbe61152cf766406bf	9 years ago
Joshua Colp	37aaaa2da2	res_pjsip_endpoint_identifier_ip: Add support for SRV lookups. ... This change implements SRV support for the IP based endpoint identifier module. All possible addresses through SRV are looked up and added as matches. If no SRV records are available a fallback to normal host resolution is done. If an IP address is provided then no SRV lookup occurs. This is configured using the "srv_lookups" option on the identify section and defaults to "yes". ASTERISK-26693 Change-Id: I6b641e275bf96629320efa8b479737062aed82ac	9 years ago
George Joseph	ebc67d3053	res_pjsip_registrar: AMI Add RegistrationInboundContactStatuses command ... The PJSIPShowRegistrationsInbound AMI command was just dumping out all AORs which was pretty useless and resource heavy since it had to get all endpoints, then all aors for each endpoint, then all contacts for each aor. PJSIPShowRegistrationInboundContactStatuses sends ContactStatusDetail events which meets the intended purpose of the other command and has significantly less overhead. Also, some additional fields that were added to Contact since the original creation of the ContactStatusDetail event have been added to the end of the event. For compatibility purposes, PJSIPShowRegistrationsInbound is left intact. ASTERISK-26644 #close Change-Id: I326f12c9ecb52bf37ba03f0748749de4da01490a	9 years ago
Richard Mudgett	61ba2a014a	res_pjsip_outbound_registration.c: Filter redundant statsd reporting. ... Increasing the testsuite shutdown timeout before forcibly killing Asterisk allowed more events to be sent out. Some tests failed as a result. The tests/channels/pjsip/statsd/registrations failed because we now get the statsd events that a comment in the test configuration stated couldn't be intercepted. Unfortunately, we get a variable number of events because of internal status state transition races generating redundant statsd events. We were reporting redundant statsd PJSIP.registrations.state changes for internal state changes that equated to the same thing publicly. * Made update_client_state_status() filter out redundant statsd updates. ASTERISK-26527 Change-Id: If851c7d514bb530d9226e4941ba97dcf52000646	9 years ago
Richard Mudgett	44fe4a5769	PJPROJECT logging: Made easier to get available logging levels. ... Use of the new logging is as simple as issuing the new CLI command or setting the new pjproject.conf option. Other options that can affect the logging are how you have the pjproject log levels mapped to Asterisk log types in pjproject.conf and if you have configured Asterisk to log the DEBUG type messages. Altering the pjproject.conf level mapping shouldn't be necessary for most installations as the default mapping is sensible. Configuring Asterisk to log the DEBUG message type is standard practice for collecting debug information. * Added CLI "pjproject set log level" command to dynamically adjust the maximum pjproject log message level. * Added CLI "pjproject show log level" command to see the currently set maximum pjproject log message level. * Added pjproject.conf startup section "log_level" option to set the initial maximum pjproject log message level so all messages could be captured from initialization. * Set PJ_LOG_MAX_LEVEL to 6 to compile in all defined logging levels into bundled pjproject. Pjproject will use the currently set run time log level to determine if a log message is generated just like Asterisk verbose and debug logging levels. * In log_forwarder(), made always log enabled and mapped pjproject log messages. DEBUG mapped log messages are no longer gated by the current Asterisk debug logging level. * Removed RAII_VAR() from res_pjproject.c:get_log_level(). ASTERISK-26630 #close Change-Id: I6dca12979f482ffb0450aaf58db0fe0f6d2e5389	9 years ago
zuul	b745c326c2	Merge "res/ari/resource_bridges: Add the ability to manipulate the video source" into 13	9 years ago
Maciej Szmigiero	7b96e8cc3d	Add X.509 subject alternative name support to TLS certificate ... verification. This way one X.509 certificate can be used for hosts that can be reached under multiple DNS names or for multiple hosts. Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name> ASTERISK-25063 #close Change-Id: I13302c80490a0b44c43f1b45376c9bd7b15a538f	9 years ago
Matt Jordan	d23b4af477	res/ari/resource_bridges: Add the ability to manipulate the video source ... In multi-party bridges, Asterisk currently supports two video modes: * Follow the talker, in which the speaker with the most energy is shown to all participants but the speaker, and the speaker sees the previous video source * Explicitly set video sources, in which all participants see a locked video source Prior to this patch, ARI had no ability to manipulate the video source. This isn't important for two-party bridges, in which Asterisk merely relays the video between the participants. However, in a multi-party bridge, it can be advantageous to allow an external application to manipulate the video source. This patch provides two new routes to accomplish this: (1) setVideoSource: POST /bridges/{bridgeId}/videoSource/{channelId} Sets a video source to an explicit channel (2) clearVideoSource: DELETE /bridges/{bridgeId}/videoSource Removes any explicit video source, and sets the video mode to talk detection ASTERISK-26595 #close Change-Id: I98e455d5bffc08ea5e8d6b84ccaf063c714e6621	9 years ago
Joshua Colp	71dc333565	app_queue: Add mention of 'ABANDON' variable to CHANGES. ... ASTERISK-26558 Change-Id: I1127010181e79c8ac291f72f036cb8e430dc7f7e	9 years ago
Alexander Traud	0cf1778eed	rtp_engine: Allow more than 32 dynamic payload types. ... The dynamic range (96-127) allows 32 RTP Payload Types. RFC 3551 section 3 allows to reassign other ranges. Consequently, when the dynamic range is exhausted, you can go for "rtp_pt_dynamic = 35" (or 0) in asterisk.conf. This enables the range 35-63 (or 0-63) giving room for another 29 (or 64) payload types. ASTERISK-26311 #close Change-Id: I7bc96ab764bc30098a178b841cbf7146f9d64964 (cherry picked from commit 9ac53877f6)	9 years ago
Matt Jordan	29692d4aa4	res/stasis: Add CLI commands for displaying/debugging ARI apps ... This patch adds three new CLI commands: - ari show apps: list the registered ARI applications - ari show app: show detailed information about an ARI application - ari set debug: dump events being sent to an ARI application Note that while these CLI commands live in the res_stasis module, we use the 'ari' family for these commands. This was done as most users of Asterisk aren't aware of the semantic differences between ARI and res_stasis, and some 'ari' CLI commands already exist. ASTERISK-26488 #close Change-Id: I51ad6ff0cabee0d69db06858c13f18b1c513c9f5	9 years ago
Joshua Colp	e0bc17edff	pjsip: Fix a few media bugs with reinvites and asymmetric payloads. ... When channel format changes occurred as a result of an RTP re-negotiation the bridge was not informed this had happened. As a result the bridge technology was not re-evaluated and the channel may have been in a bridge technology that was incompatible with its formats. The bridge is now unbridged and the technology re-evaluated when this occurs. The chan_pjsip module also allowed asymmetric codecs for sending and receiving. This did not work with all devices and caused one way audio problems. The default has been changed to NOT do this but to match the sending codec to the receiving codec. For users who want asymmetric codecs an option has been added, asymmetric_rtp_codec, which will return chan_pjsip to the previous behavior. The codecs returned by the chan_pjsip module when queried by the bridge_native_rtp module were also not reflective of the actual negotiated codecs. The nativeformats are now returned as they reflect the actual negotiated codecs. ASTERISK-26423 #close Change-Id: I6ec88c6e3912f52c334f1a26983ccb8f267020dc	9 years ago
Joshua Colp	bb982480d8	pjsip: Support dual stack automatically. ... This change adds support for dual stack automatically. No configuration is required and the IP address and version in the SIP messages and SDP will be automatically changed based on the transport over which the message is being sent. RTP usage has also been changed to listen on both IPv4 and IPv6 simultaneously to allow media to flow, and to allow ICE support on both simultaneously. This also allows failover between IPv6 and IPv4 to work as expected. ASTERISK-26309 #close Change-Id: I235a421d8f9a326606d861b449fa6fe3a030572d	9 years ago