Previous chan_sip behavior:
Before this patch chan_sip would always strip any quotes from an incoming
reason and pass that value up as the REDIRECTING(reason). For an outgoing
reason value, chan_sip would check the value against known values and
quote any it didn't recognize. Incoming 480 response message reason text
was just assigned to the REDIRECTING(reason).
Previous chan_pjsip behavior:
Before this patch chan_pjsip would always pass the incoming reason value
up as the REDIRECTING(reason). For an outgoing reason value, chan_pjsip
would send the reason value as passed down.
With this patch:
Both channel drivers match incoming reason values with values documented
by REDIRECTING(reason) and values documented by RFC5806 regardless of
whether they are quoted or not. RFC5806 values are mapped to the
equivalent REDIRECTING(reason) documented value and is set in
REDIRECTING(reason). e.g., an incoming RFC5806 'unconditional' value or a
quoted string version ('"unconditional"') is converted to
REDIRECTING(reason)'s 'cfu' value. The user's dialplan only needs to deal
with 'cfu' instead of any of the aliases.
The incoming 480 response reason text supported by chan_sip checks for
known reason values and if not matched then puts quotes around the reason
string and assigns that to REDIRECTING(reason).
Both channel drivers send outgoing known REDIRECTING(reason) values as the
unquoted RFC5806 equivalent. User custom values are either sent as is or
with added quotes if SIP doesn't allow a character within the value as
part of a RFC3261 Section 25.1 token. Note that there are still
limitations on what characters can be put in a custom user value. e.g.,
embedding quotes in the middle of the reason string is silly and just
going to cause you grief.
* Setting a REDIRECTING(reason) value now recognizes RFC5806 aliases.
e.g., Setting REDIRECTING(reason) to 'unconditional' is converted to the
'cfu' value.
* Added missing malloc() NULL return check in res_pjsip_diversion.c
set_redirecting_reason().
* Fixed potential read from a stale pointer in res_pjsip_diversion.c
add_diversion_header(). The reason string needed to be copied into the
tdata memory pool to ensure that the string would always be available.
Otherwise, if the reason string returned by reason_code_to_str() was a
user's reason string then the string could be freed later by another
thread.
Change-Id: Ifba83d23a195a9f64d55b9c681d2e62476b68a87
Background here:
http://lists.digium.com/pipermail/asterisk-dev/2016-January/075266.html
From CHANGES:
* To help insure that Asterisk is compiled and run with the same known
version of pjproject, a new option (--with-pjproject-bundled) has been
added to ./configure. When specified, the version of pjproject specified
in third-party/versions.mak will be downloaded and configured. When you
make Asterisk, the build process will also automatically build pjproject
and Asterisk will be statically linked to it. Once a particular version
of pjproject is configured and built, it won't be configured or built
again unless you run a 'make distclean'.
To facilitate testing, when 'make install' is run, the pjsua and pjsystest
utilities and the pjproject python bindings will be installed in
ASTDATADIR/third-party/pjproject.
The default behavior remains building with the shared pjproject
installation, if any.
Building:
All you have to do is include the --with-pjproject-bundled option on
the ./configure command line (and remove any existing --with-pjproject
option if specified). Everything else is automatic.
Behind the scenes:
The top-level Makefile was modified to include 'third-party' in the
list of MOD_SUBDIRS.
The third-party directory was created to contain any third party
packages that may be needed in the future. Its Makefile automatically
iterates over any subdirectories passing on targets.
The third-party/pjproject directory was created to house the pjproject
source distribution. Its Makefile contains targets to download, patch
configure, generate dependencies, compile libs, apps and python bindings,
sanitized build.mak and generate a symbols list.
When bootstrap.sh is run, it automatically includes the configure.m4
file in third-party/pjproject. This file has a macro to download and
conifgure pjproject and get and set PJPROJECT_INCLUDE, PJPROJECT_DIR
and PJPROJECT_BUNDLED. It also tests for the capabilities like
PJ_TRANSACTION_GRP_LOCK by parsing preprocessor output as opposed to
trying to compile. Of course, bootstrap.sh is only run once and the
configure file is incldued in the patch.
When configure is run with the new options, the macro in configure.m4
triggers the download, patch, conifgure and tests. No compilation is
performed at this time. The downloaded tarball is cached in /tmp so
it doesn't get downloaded again on a distclean.
When make is run in the top-level Asterisk source directory, it will
automatically descend all the subdirectories in third_party just as it
does for addons, apps, etc. The top-level Makefile makes sure that
the 'third-party' is built before 'main' so that dependencies from the
other directories are built first.
When main does build, a new shared library (libasteriskpj) is created that
links statically to the pjproject .a files and exports all their symbols.
The asterisk binary links to that, just as it does with libasteriskssl.
When Asterisk is installed, the pjsua and pjsystest apps, and the pjproject
python bindings are installed in ASTDATADIR/third-party/pjproject. This
will facilitate testing, including running the testsuite which will be
updated to check that directory for the pjsua module ahead of the system
python library.
Modules should continue to depend on pjproject if they use pjproject APIs
directly. They should not care about the implementation. No changes to any
res_pjsip modules were made.
Change-Id: Ia7a60c28c2e9ba9537c5570f933c1ebcb20a3103
The channel is now going to get T.38 terminated when it leaves the
bridging system and the bridged peers are going to get T.38 terminated as
well.
ASTERISK-25582
Change-Id: I77a9205979910210e3068e1ddff400dbf35c4ca7
Local channel optimization could cause DTMF digits to be duplicated.
Pending DTMF end events would be posted to a bridge when the local channel
optimizes out and is replaced by the channel further down the chain. When
the real digit ends, the channel would get another DTMF end posted to the
bridge.
A -- LocalA;1/n -- LocalA;2/n -- LocalB;1 -- LocalB;2 -- B
1) LocalA has the /n flag to prevent optimization.
2) B is sending DTMF to A through the local channel chain.
3) When LocalB optimizes out it can move B to the position of LocalB;1
4) Without this patch, when B swaps with LocalB;1 then LocalB;1 would
settle an owed DTMF end to the bridge toward LocalA;2.
5) When B finally ends its DTMF it sends the DTMF end down the chain.
6) Without this patch, A would hear the DTMF digit end when LocalB
optimizes out and when B ends the original digit.
ASTERISK-25582
Change-Id: I1bbd28b8b399c0fb54985a5747f330a4cd2aa251
Frame hooks can conceivably return a control frame in exchange for an
audio frame inside ast_write(). Those returned control frames were not
handled quite the same as if they were sent to ast_indicate(). Now it
doesn't matter if you use ast_write() to send an AST_FRAME_CONTROL to a
channel or ast_indicate().
ASTERISK-25582
Change-Id: I5775f41421aca2b510128198e9b827bf9169629b
The ast_sorcery_create, update and delete function have been refactored
to better deal with caches and errors.
The action is now called on all non-caching wizards first. If ANY succeed,
the action is called on all caching wizards and the observers are notified.
This way we don't put something in the cache (or update or delete) before
knowing the action was performed in at least 1 backend and we only call the
observers once even if there were multiple writable backends.
ast_sorcery_create was never adding to caches in the first place which
was preventing contacts from getting added to a memory_cache when they
were created. In turn this was causing memory_cache to emit errors if
the contact was deleted before being retrieved (which would have
populated the cache).
ASTERISK-25811 #close
Reported-by: Ross Beer
Change-Id: Id5596ce691685a79886e57b0865888458d6e7b46
The return type of ast_cel_track_event() is not large enough to return all
64 potential bits of the event enable mask. Fortunately, the defined CEL
events do not really need all 64 bits and the return value is only used to
determine if the requested CEL event is enabled.
* Made the ast_cel_track_event() return 0 or 1 only so the return value
can fit inside an int type instead of zero or a truncated 64 bit non-zero
value.
Change-Id: I783d932320db11a95c7bf7636a72b6fe2566904c
The SSL_OP_NO_TLSv1_1 and SSL_OP_NO_TLSv1_2 defines did not exist prior
to OpenSSL version 1.0.1. A recent commit attempts to, by default, set
these options, which can cause problems on systems with older OpenSSL
installations.
This commit adds a configure script check for those defines and will not
attempt to make use of those if they do not exist. We will print a
warning urging the user to upgrade their OpenSSL installation if those
defines are not present.
Change-Id: I6a2eb9a43fd0738b404d8f6f2cf4b5c22d9d752d
This change exposes the configuration of various aspects of the TLS
support and sets the default to the modern standards.
The TLS cipher is now set to the best values according to the
Mozilla OpSec team, different TLS versions can now be disabled, and
the cipher order can be forced to be that of the server instead of
the client.
ASTERISK-24972 #close
Change-Id: I0a10f2883f7559af5e48dee0901251dbf30d45b8
Sending UDPTL packets to Asterisk with the right amount of missing
sequence numbers and enough redundant 0-length IFP packets, can make
Asterisk crash.
ASTERISK-25603 #close
Reported by: Walter Doekes
ASTERISK-25742 #close
Reported by: Torrey Searle
Change-Id: I97df8375041be986f3f266ac1946a538023a5255
The config options framework is strict in that configuration options must
be documented unless XML documentation support is not available. In
practice this is useful as it ensures documentation exists however in
off-nominal cases this can cause strange problems.
If it is expected that a config option has a non-zero or non-empty
default value but the config option documentation is unavailable
this reasonable expectation will not be met. This can cause obscure
crashes and weirdness depending on how the code handles it.
This change tweaks the behavior to ensure that the config option
is still allowed to register, apply default values, and be set when
devmode is not enabled. If devmode is enabled then the option can
NOT be set.
This also does not remove the initial documentation error message that
is output on load when registering the configuration option.
ASTERISK-25725 #close
Change-Id: Iec42fca6b35f31326c33fcdc25473f6fd7bc8af8
The null terminator of the tail struct member was not being allocated
when no logger.conf config file is installed.
ASTERISK-25714 #close
Reported by: Badalian Vyacheslav
Change-Id: I45770fdd08af39506a3bc33ba279c4f16e047a30
Make sure buf[res] is not accessed at res=-1 (buffer underrun).
Address Sanitizer will complain about this quite loudly.
ASTERISK-24801 #close
Change-Id: Ifcd7f691310815a31756b76067c56fba299d3ae9
You have to call ast_taskprocessor_unref() outside of the taskprocessor
implementation code. Taskprocessor use since v12 has become more
transient than just the singleton uses in earlier versions.
Change-Id: If7675299924c0cc65f2a43a85254e6f06f2d61bb
This removes logchannels locking from init_logger_chain, puts the
responsibility on the caller. Adds locking around the one call that was
missing it.
ASTERISK-24833
Change-Id: I6cc42117338bf9575650a67bcb78ab1a33d7bad8
The xferfailsound was read from the channel at the beginning of the transfer,
and that value is "cached" for the duration of the transfer. Therefore, changing
the xferfailsound on the channel using the FEATURE() dialplan function does
nothing once the transfer is under way.
This makes it so the transfer code instead gets the xferfailsound configuration
options from the channel when it is actually going to be used.
This patch also fixes a potential memory leak of the props object as well as
making sure the condition variable gets initialized before being destroyed.
ASTERISK-25696 #close
Change-Id: Ic726b0f54ef588bd9c9c67f4b0e4d787934f85e4
* Add freed regions totals to allocations and summary.
* Add totals for all allocations and not just the selected allocations.
Change-Id: I61d5a5112617b0733097f2545a3006a344b4032a
If the attended transfer destination answers (picks call up or goes to
voicemail) and then hangs up on the transferer then transferer hears the
fail sound.
This patch makes it so the fail sound is not played when the transfer
destination/target hangs up after answering.
ASTERISK-25697 #close
Change-Id: I97f142fe4fc2805d1a24b7c16143069dc03d9ded
This issue was exposed when executing a connected line subroutine.
When connected or redirected subroutines or macros are executed it is
expected that the underlying applications and logic invoked are fast
and do not consume frames. In practice this constraint is not enforced
and if not adhered to will cause channels to continue when they shouldn't.
This is because each caller of the connected or redirected logic does not
check whether the channel has been hung up on return. As a result the
the hung up channel continues.
This change makes it so when the API to execute a subroutine or
macro is invoked the channel is checked to determine if it has hung up.
If it has then a hangup is queued again so the caller will see it
and stop.
ASTERISK-25690 #close
Change-Id: I1f9a8ceb1487df0389f0d346ce0f6dcbcaf476ea
* changes:
Sorcery: Create human friendly serializer names.
Stasis: Create human friendly taskprocessor/serializer names.
taskprocessor.c: New API for human friendly taskprocessor names.
taskprocessor.c: Sort CLI "core show taskprocessors" output.
Recent changes (ASTERISK-25394 commit 2bd27d1222)
introduced the possibility of a deadlock. Due to the mentioned modifications
ast_change_hints now needs to keep both merge/delete and state callbacks from
occurring while it executes. Unfortunately, sometimes ast_change_hints can be
called with the contexts container locked. When this happens it's possible for
another thread to grab the context_merge_lock before the thread calling into
ast_change_hints does and then try to obtain the contexts container lock. This
of course causes a deadlock between the two threads. The thread calling into
ast_change_hints waits for the other thread to release context_merge_lock and
the other thread is waiting on that one to release the contexts container lock.
Unfortunately, there is not a great way to fix this problem. When hints change,
the subsequent state callbacks cannot run at the same time as a merge/delete,
nor when the usual state callbacks do. This patch alleviates the problem by
having those particular callbacks (the ones run after a hint change) occur in a
serialized task. By moving the context_merge_lock to a task it can now safely be
attempted or held without a deadlock occurring.
ASTERISK-25640 #close
Reported by: Krzysztof Trempala
Change-Id: If2210ea241afd1585dc2594c16faff84579bf302
* Add new API call to get a sequence number for use in human friendly
taskprocessor names.
* Add new API call to create a taskprocessor name in a given buffer and
append a sequence number.
Change-Id: Iac458f05b45232315ed64aa31b1df05b875537a9
Update the CLI "core show taskprocessors" output format to not be
distorted because UUID names are longer than previously used taskprocessor
names.
Change-Id: I1a5c82ce3e8f765a0627796aba87f8f7be077601
The CLI "core ping taskprocessor" command does not work very
well with taskprocessor names that have spaces in them. You
have to put quotes around the name so using tab completion
becomes awkward.
Change-Id: I29e806dd0a8a0256f4e2e0a7ab88c9e19ab0eda0
This resolves a reference leak caused by ASTERISK-25535. The pointer
returned by ast_format_get_codec is saved so it can be released.
ASTERISK-25664 #close
Change-Id: If9941b1bf4320b2c59056546d6bce9422726d1ec
This is the sixth patch in a series meant to reduce the bulk of pbx.c.
This moves hangup handler management functions to their own source.
Change-Id: Ib25a75aa57fc7d5c4294479e5cc46775912fb104
This is the sixth patch in a series meant to reduce the bulk of pbx.c.
This moves dialplan application management functions to their own source.
Change-Id: I444c10fb90a3cdf9f3047605d6a8aad49c22c44c
This is the fifth patch in a series meant to reduce the bulk of pbx.c.
This moves ast_switch functions to their own source.
Change-Id: Ic2592a18a5c4d8a3c2dcf9786c9a6f650a8c628e
This is the fourth patch in a series meant to reduce the bulk of pbx.c.
This moves pbx timing functions to their own source.
Change-Id: I05c45186cb11edfc901e95f6be4e6a8abf129cd6
The menuselect conflict between app_voicemail and res_mwi_external
makes it hard to package 1 version of Asterisk. There no actual
build dependencies between the 2 so moving this check to runtime
seems like a better solution.
The ast_vm_register and ast_vm_greeter_register functions in app.c
were modified to return AST_MODULE_LOAD_DECLINE instead of -1 if there
is already a voicemail module registered. The modules' load_module
functions were then modified to return DECLINE instead of -1 to the
loader. Since -1 is interpreted by the loader as AST_MODULE_LOAD_FAILURE,
the modules were incorrectly causing Asterisk to stop so this needed
to be cleaned up anyway.
Now you can build both and use modules.conf to decide which voicemail
implementation to load.
The default menuselect options still build app_voicemail and not
res_mwi_external but if both ARE built, res_mwi_external will load
first and become the voicemail provider unless modules.conf rules
prevent it. This is noted in CHANGES.
Change-Id: I7d98d4e8a3b87b8df9e51c2608f0da6ddfb89247
This is the third patch in a series meant to reduce the bulk of pbx.c.
This moves channel and global variable routines to their own source.
Change-Id: Ibe8fb4647db11598591d443a99e3f99200a56bc6
Prior to this patch, we explicitly disallowed setting any properties on a
finalized CDR. This seemed like a good idea at the time; in practice, it was
more restrictive.
There are weird and strange scenarios where setting a property on a finalized
CDR is definitely wrong. For example, we may Fork a CDR, finalizing the
previous one, then change a property. In said case, the old CDR is supposed
to now be 'immutable' (so to speak), and should not be updated. From the
perspective of the code, a forked CDR that is finalized is just finalized.
Hence why we decided these should not be updated.
In practice, it is much more common to want to set a property on a CDR in
the h extension or in a hangup handler. Disallowing a common scenario to make
an esoteric behaviour work isn't good. This patch fixes this by allowing
callers to set a property IF we are the last CDR in the chain. This preserves
the finalized CDR if it was forked, while allowing the more common case to
function.
ASTERISK-25458 #close
Change-Id: Icf3553c607b9f561152a41e6d8381d594ccdf4b9
Prior to this patch, the CDR engine attempted to set the end time on a CDR
that was executing hangup logic and with endbeforehexten set to Yes by
calling a function that inspects the properties on the Party A snapshot to
determine if we are ready to set the end time. That always failed. This is
because a Party A snapshot is not updated for CDRs that are executing hangup
logic with endbeforehexten=Yes.
Instead of calling a function that looks at the Party A snapshot, we just
simply set the end time on the CDR. This is safe to call multiple times, and is
safe to call at this point as we know that (a) we are executing hangup logic,
and (b) we are supposed to set the end time at this point.
ASTERISK-25458
Change-Id: I0c27b493861f9c13c43addbbb21257f79047a3b3
This is the second patch in a series meant to reduce the bulk of pbx.c.
This moves custom function management routines to their own source.
Change-Id: I34a6190282f781cdbbd3ce9d3adeac3c3805e177
We joked about splitting pbx.c into multiple files but this first step was
fairly easy. All of the pbx_builtin dialplan applications have been moved
into pbx_builtins.c and a new pbx_private.h file was added. load_pbx_builtins()
is called by asterisk.c just after load_pbx().
A few functions were renamed and are cross-exposed between the 2 source files.
Change-Id: I87066be3dbf7f5822942ac1449d98cc43fc7561a
The test_timezone_watch unit test is written to expect a
condition to be signaled when the inotify daemon thread runs.
There exists a small window where the test_timezone_watch
thread can signal the inotify daemon thread while it is not
reading on the underlying file descriptor. If this occurs
the test_timezone_watch thread will wait indefinitely for a
signal that will never arrive.
This change adds a timeout to the condition so it will return
regardless after a period of time.
Change-Id: Ifed981879df6de3d93acd3ee0a70f92546517390
When an endpoint is created, its messages are forwarded to both the tech
endpoint topic and the all endpoints topic. This is done so that various
parties interested in endpoint messages can subscribe to just the tech
endpoint and receive all messages associated with that particular technology,
as opposed to subscribing to the all endpoints topic. Unfortunately, when the
tech endpoint is created, it also forwards all of its messages to the all
topic. This results in duplicate messages whenever an endpoint publishes its
messages.
This patch resolves the duplicate message issue by creating a new function
for Stasis caching topics, stasis_cp_sink_create. In most respects, this acts
as a normal caching topic, save that it no longer forwards messages it receives
to the all endpoints topic. This allows it to act as an aggregation "sink",
while preserving the necessary caching behaviour.
ASTERISK-25137 #close
Reported-by: Vitezslav Novy
ASTERISK-25116 #close
Reported-by: George Joseph <george.joseph@fairview5.com>
Tested-by: George Joseph <george.joseph@fairview5.com>
Change-Id: Ie47784adfb973ab0063e59fc18f390d7dd26d17b
Use of GOTO_ON_BLINDXFR would not work at all. The target location would
never be executed by the transferring channel.
* Made feature_blind_transfer() call ast_bridge_set_after_go_on() with
valid context, exten, and priority parameters from the transferring
channel.
* Renamed some feature_blind_transfer() local variables for clarity.
ASTERISK-25641 #close
Reported by Dmitry Melekhov
Change-Id: I19bead9ffdc4aee8d58c654ca05a198da1e4b7ac
This change introduces the configuration option 'full_backend_cache'
which changes the cache to be a full mirror of the backend instead
of a per-object cache. This allows all sorcery retrieval operations
to be carried out against it and is useful for object types which
are used in a "retrieve all" or "retrieve some" pattern.
ASTERISK-25625 #close
Change-Id: Ie2993487e9c19de563413ad5561c7403b48caab5
When applying an empty DTLS configuration the filenames in the
configuration will be empty. This is actually valid to do and
each filename should simply be ignored.
Change-Id: Ib761dc235638a3fb701df337952f831fc3e69539
The JSON library Asterisk uses, jansson, is not thread
safe for us in a few ways. To help with this wrappers for JSON
object reference count increasing and decreasing were added
which use a global lock to ensure they don't clobber over
each other. This does not extend to reference count manipulation
within the jansson library itself. This means you can't safely
use the object borrowing specifier (O) in ast_json_pack and
you can't share JSON instances between objects.
This change removes uses of the O specifier and replaces them
with the o specifier and an explicit ast_json_ref. Some cases
of instance sharing have also been removed.
ASTERISK-25601 #close
Change-Id: I06550d8b0cc1bfeb56cab580a4e608ae4f1ec7d1
When the asterisk sending OriginateResponse message,
it doesn't set the "Uniqueid".
And it didn't support correct response message for
Application originate.
ASTERISK-25624 #close
Change-Id: I26f54f677ccfb0b7cfd4967a844a1657fd69b74d
An ERROR or WARNING message should generally indicate that something has gone
wrong in Asterisk. In the case of writing to a file descriptor, Asterisk is not
in control of when the far end closes its reading on a file descriptor. If the
far end does close the file descriptor in an unclean fashion, this isn't a bug
or error in Asterisk, particularly when the situation can be gracefully
handled in Asterisk.
Currently, when this happens, a user would see the following somewhat cryptic
ERROR message:
"utils.c: write() returned error: Broken pipe"
There's a few problems with this:
(1) It doesn't provide any context, other than 'something broke a pipe'
(2) As noted, it isn't actually an error in Asterisk
(3) It can get rather spammy if the thing breaking the pipe occurs often, such
as a FastAGI server
(4) Spammy ERROR messages make Asterisk appear to be having issues, or can even
mask legitimate issues
This patch changes ast_carefulwrite to only log an ERROR if we actually had one
that was reasonably under our control. For debugging purposes, we still emit
a debug message if we detect that the far side has stopped reading.
Change-Id: Ia503bb1efcec685fa6f3017bedf98061f8e1b566
pjproject < 2.5.0 will segfault on a tls transport if async_operations
is greater than 1. A runtime version check has been added to throw
an error if the version is < 2.5.0 and async_operations > 1.
To assist in the check, a new api "ast_compare_versions" was added
to utils which compares 2 major.minor.patch.extra version strings.
ASTERISK-25615 #close
Change-Id: I8e88bb49cbcfbca88d9de705496d6f6a8c938a98
Reported-by: George Joseph
Tested-by: George Joseph
Both transport and endpoint now check for the existence and readability
of tls certificate and key files before passing them on to pjproject.
This will cause the object to not load rather than waiting for pjproject
to discover that there's a problem when a session is attempted.
NOTE: chan_sip also uses ast_rtp_dtls_cfg_parse but it's located
in build_peer which is gigantic and I didn't want to disturb it.
Error messages will emit but it won't interrupt chan_sip loading.
ASTERISK-25618 #close
Change-Id: Ie43f2c1d653ac1fda6a6f6faecb7c2ebadaf47c9
Reported-by: George Joseph
Tested-by: George Joseph
This patch fixes a crash which would occur when an audiohook was
applied to a channel using an audio codec that could not be translated
to signed linear (such as when using pass-through codecs like OPUS or
when the codec translator module for the format in use is not loaded).
ASTERISK-25498 #close
Reported by: Ben Langfeld
Change-Id: Ib6ea7373fcc22e537cad373996136636201f4384
Currently if a channel is transferred out of a bridge, the BRIDGEPEER
variable (also BRIDGEPVTCALLID) remain set even once the channel is
out of the bridge. This patch removes these variables when leaving
the bridge.
ASTERISK-25600 #close
Reported by: Mark Michelson
Change-Id: I753ead2fffbfc65427ed4e9244c7066610e546da
According to the API doxygen a sched ID of 0 is valid. Unfortunately, 0
was never returned historically and several users incorrectly coded usage
of the returned sched ID assuming that 0 was invalid.
ASTERISK-25476
Change-Id: Ib19c7ebb44ec9fd393ef6646dea806d4f34e3a20
channels/chan_iax2.c:
* Initialize struct chan_iax2_pvt scheduler ids earlier because of
iax2_destroy_helper().
channels/chan_sip.c:
channels/sip/config_parser.c:
* Fix initialization of scheduler id struct members. Some off nominal
paths had 0 as a scheduler id to be destroyed when it was never started.
chan_skinny.c:
* Fix some scheduler id comparisons that excluded the valid 0 id.
channel.c:
* Fix channel initialization of the video stream scheduler id.
pbx_dundi.c:
* Fix channel initialization of the packet retransmission scheduler id.
ASTERISK-25476
Change-Id: I07a3449f728f671d326a22fcbd071f150ba2e8c8
dns.c and dns_system_resolver.c were spitting out errors for lookup
failures for things like not finding a SRV record even though
there was an A record. Those have been changed to debug messages.
Logging not finding ANY record is left to the higher level caller.
Also, dns_system_resolver was using Windows line endings so I
converted them to Unix style. The actual log changes are on lines
156 and 159.
Change-Id: I65be16ea15304b96f9dcb4d289dbd3e2286fc094
Several issues are addressed here:
- main() is large, and half of it is only used if we're not rasterisk;
fixed by spliting up the daemon part into a separate function.
- Call ast_term_init from rasterisk as well.
- Remove duplicate code reading/writing asterisk history file.
- Attempt to tackle background color issues and color changes that
occur. Tested by starting asterisk -c until the colors stopped
changing at odd locations.
- Remove unused term_prep() and term_prompt() functions.
ASTERISK-25585 #close
Change-Id: Ib641a0964c59ef9fe6f59efa8ccb481a9580c52f
Because the context, extension, and application are stored in stringfields,
checking for them being NULL doesn't work so well. This patch uses the
appropriate string library call, ast_strlen_zero, to see if there is a value
in the context/exten/app values.
Change-Id: Ie09623bfdf35f5a8d3b23dd596647fe3c97b9a23
Previously, a trancoding module did not have access to the joint but cached
format. Therefore, the module did not have access to the attributes negotiated
via SDP (line fmtp). Now, a translation module receives the joint format.
ASTERISK-25545 #close
Change-Id: Id6878a989b50573298dab115d3371ea369e1a718
When dns_parse_answer_ex was iterating over the answers it
wasn't incrementing the answer pointer correctly after the first
answer. The result was that no answers after the first
were being returned. For results where multiple records should
have been sorted by priority, weight, etc., there was nothing
to sort so the only the first record was returned even if it
wouldn't have been the correct record based on the sort.
ASTERISK-25565 #close
Reported-by: Daniel Tryba
Tested-by George Joseph
Change-Id: I8622604fefdcd3c11e2c5609a6382e53b1467b0b
The hashtab API is pretty NULL tolerant which has resulted
in remaining callers not doing much checks themselves.
Unfortunately the function to destroy an iterator does not
do a NULL check and will result in a crash if passed NULL.
This change fixes that.
ASTERISK-25552 #close
Change-Id: Ic1bf8eec3639e5a440f1c941d3ae3893ac6ed619
In practical tests, we have seen certain taskprocessors, specifically
Stasis subscription taskprocessors, cross the recently-added high-water
mark and emit a warning. This high-water mark warning is only intended
to be emitted when things have tanked on the system and things are
heading south quickly. In the practical tests, the Stasis taskprocessors
sometimes had a max depth of 180 tasks in them, and Asterisk wasn't in
any danger at all.
As such, this ups the high-water mark to 500 tasks instead. It also
redefines the SIP threadpool request denial number to be a multiple of
the taskprocessor high-water mark.
Change-Id: Ic8d3e9497452fecd768ac427bb6f58aa616eebce
In Asterisk 13, cached formats are created before their corresponding format-
attribute module is registered. Cached formats are involved when a local
extension is called. Therefore, ast_format_generate_sdp_fmtp did not work
on local extensions. This change affects the Opus Codec, H.263 (Plus), H.264,
and format-attribute modules provided externally.
ASTERISK-25160 #close
Change-Id: I1ea1f0483e5261e2a050112e4ebdfc22057d1354
We have observed situations where the SIP threadpool may become
deadlocked. However, because incoming traffic is still arriving, the SIP
threadpool's queue can continue to grow, eventually running the system
out of memory.
This change makes it so that incoming traffic gets rejected with a 503
response if the queue is backed up too much.
Change-Id: I4e736d48a2ba79fd1f8056c0dcd330e38e6a3816
When appending all formats of a type all the codecs are iterated
and added. This operation was incorrectly adding the ast_format_none
format which is special in that it is supposed to be used when no
format is present. It shouldn't be appended.
ASTERISK-25535
Change-Id: I7b00f3bdf4a5f3022e483d6ece602b1e8b12827c
This change adds handling of dead worker threads when moving them
to be active. When this happens the worker thread is removed from
both the active and idle threads container. If no threads are able
to be moved to active then the pool grows as configured.
A unit test has also been added which thrashes the idle timeout
and thread activation to exploit any race conditions between the
two.
ASTERISK-25546 #close
Change-Id: I6c455f9a40de60d9e86458d447b548fb52ba1143
Previously, format-attribute modules relied on an existing fmtp line in SDP
negotiation. However, fmtp is optional for several formats like the Opus Codec.
Now, the format-attribute module is called with an empty fmtp, which allows the
module to initialise itself to RFC defaults. Furthermore now, Asterisk is able
to differentiate between internally and externally created formats.
ASTERISK-25537 #close
Change-Id: I28f680cef7fdf51c0969ff8da71548edad72ec52
ABI compatibility stubs existed for ast_app_separate_args and ast_verbose,
this is not needed in master.
Change-Id: I07b4d2c16079da3c2c6efa55df4a74368e0bd453
Since Asterisk 13, formats are immutable and cached. However while loading a
module like chan_sip, some formats were created instead using cached ones.
ASTERISK-25535 #close
Change-Id: I479cdc220d5617c840a98f3389b3bd91e91fbd9b
dns_parse_answer_ex was not converting ans->ttl from network
by order to host byte order which was causing certain ttls
it to go negative. In turn this was causing answer edit checks
to fail.
ASTERISK-25528 #close
Reported-by: Daniel Tryba
Tested-by: George Joseph
Change-Id: I31505132d6321c46d2f39fd06c20ee808a864037
Previously, the wrapping did both lookahead and lookback, which,
together with color escape sequences, caused some lines to be wrapped
way earlier than other lines. This led to inconsistent output.
This simplifies the wrapping code and makes it more sane: if maxcolumns
is hit, we simply jump back to the last space and wrap there.
ASTERISK-25527 #close
Change-Id: I56d01c6f9a812642b1b05535c98d4db48d17c957
If a taskprocessor's queue grows large, this can indicate that there
may be a problem with tasks not leaving the processor or else that
the number of available task processors for a given type of task is
too low. This patch makes it so that if a taskprocessor's task queue
grows above 100 queued tasks that it will emit a warning message.
Warning messages are emitted only once per task processor.
ASTERISK-25518 #close
Reported by: Jonathan Rose
Change-Id: Ib1607c35d18c1d6a0575b3f0e3ff5d932fd6600c
When a dial attempt is made that involves a requesting channel, we previously
were not:
a) Protecting access to the native format capabilities structure on the
requesting channel. That is inherently unsafe.
b) Reference bumping the lifetime of the format capabilities structure.
In both cases, something else could sneak in, blow away the format
capabilities, and we'd be holding onto an invalid format_cap structure. When
the newly created channel attempts to construct its format capabilities, things
go poorly.
This patch:
a) Ensures that we get a reference to the native format capabilities while
the requesting channel is locked
b) Holds a reference to the native format capabilities during the creation
of the new channel.
ASTERISK-25522 #close
Change-Id: I0bfb7ba8b9711f4158cbeaae96edf9626e88a54f
A previous commit reduced the AST_BUILDOPTS compiler define to
only include options that affected ABI. This included some options
that were previously displayed by cli "core show settings". This
change corrects the CLI display while still restricting buildopts.h
to ABI effecting options only.
ASTERISK-25434 #close
Reported by: Rusty Newton
Change-Id: Id07af6bedd1d7d325878023e403fbd9d3607e325
The JSON packing for the ContactStatusChange event forgot to include the
roundtrip_usec field. As a result, the field never showed up in any event,
even when the data was available. This patch corrects that error by properly
packing the JSON blob with the data.
Change-Id: I8df80da659a44010afbd48f645967518ff5daa17
A crash was seen on a system that ran out of memory due to Asterisk not
checking for vector allocation failures in format_cap.c. With this
change, if either of the AST_VECTOR_INIT calls fail, we will return a
value indicating failure.
Change-Id: Ieb9c59f39dfde6d11797a92b45e0cf8ac5722bc8
Users of functions which call __ast_str_helper() such as the ones listed
below are likely to not check the return value for failure so ensuring
that the string is always nil terminated is a good safety measure.
ast_str_set_va()
ast_str_append_va()
ast_str_set()
ast_str_append()
Change-Id: I36ab2d14bb6015868b49329dda8639d70fbcae07
In September 2006, the maximum packetization time (ptime) were set to such a
low value, packetization was disabled for many codecs actually. This was fixed
for many codecs but not for iLBC 30. This enables packetization for iLBC which
can be enabled for example via allow=ilbc:60,gsm,alaw,ulaw in the file sip.conf.
ASTERISK-7803
Change-Id: I2ef90023d35efb7cb8fe96ed74f53f6846ffad12
This patch adds the functions
ast_cdr_modifier_register()
ast_cdr_modifier_unregister()
That work much like ast_cdr_register() and ast_cdr_unregister().
Modules registered will be given a chance to modify (or to do whatever
they want) CDR fields just before they are passed to registered engines.
Thus, for instance, if a module change the "userfield" field of a CDR,
the modified value will be passed to every registered CDR backend for
logging.
ASTERISK-25479 #close
Change-Id: If11d8fd19ef89b1a66ecacf1201e10fcf86ccd56
The memory corruption could happen if the [section](+) is the last section
in the file with trailing comments. In this case process_text_line() has
left *last_cat is set to newcat and newcat is destroyed.
Change-Id: I0d1d999f553986f591becd000e7cc6ddfb978d93
An #include right after a [section](+) would associate any variable
assignments before a new section in the #include with the wrong section.
* Fix section association by setting the current section to the appended
section.
* Fix '+' and '!' section flag interaction corner case depending upon
which flag came first. If the '!' came first then it would be ignored.
If the '!' came after then it would affect the appended section. The '!'
will now no longer be ignored.
ASTERISK-25461 #close
Reported by: Sean Pimental
Change-Id: Ic9d3191c8758048e2cbce6432f854b32531731c3
When GetConfigJSON was introduced back in 1.6, it returned each
section as an array of strings: ["key=value", "key2=value2"].
Afterwards, it was changed a few times and became
["key": "value", "key2": "value2"], which is not a correct JSON.
This patch fixes that by constructing a JSON object {} instead of
an array [].
Also, the keys "istemplate" and "tempates" that are used to
indicate templates and their inherited categories are now wrapped in
quotes.
ASTERISK-25391 #close
Reported by: Bojan Nemčić
Change-Id: Ibbe93c6a227dff14d4a54b0d152341857bcf6ad8
When Asterisk is part of a larger distributed system, log files are often
gathered using tools (such as logstash) that prefer to consume information
and have it rendered using other tools (such as Kibana) that prefer a
structured format, e.g., JSON. This patch adds support for JSON formatted
logs by adding support for an optional log format specifier in Asterisk's
logging subsystem. By adding a format specifier of '[json]':
full => [json]debug,verbose,notice,warning,error
Log messages will be output to the 'full' channel in the following
format:
{
"hostname": Hostname or name specified in asterisk.conf
"timestamp": Date/Time
"identifiers": {
"lwp": Thread ID,
"callid": Call Identifier
}
"logmsg": {
"location": {
"filename": Name of the file that generated the log statement
"function": Function that generated the log statement
"line": Line number that called the logging function
}
"level": Log level, e.g., DEBUG, VERBOSE, etc.
"message": Actual text of the log message
}
}
ASTERISK-25425 #close
Change-Id: I8649bfedf3fb7bf3138008cc11565553209cc238
There was a problem observed where the "logger add channel" CLI command
would allow for a channel with the same name to be added multiple times.
This would result in each message being written out to the same file
multiple times.
The problem was due to the difference in how logger channel filenames
are stored versus the format they are allowed to be presented when they
are added. For instance, if adding the logger channel "foo" through the
CLI, the result would be a logger channel with the file name
/var/log/asterisk/foo being stored. So when trying to add another "foo"
channel, "foo" would not match "/var/log/asterisk/foo" so we'd happily
add the duplicate channel.
The fix presented here is to introduce two new methods in the logger
code:
* make_filename(): given a logger channel name, this creates the
filename for that logger channel.
* find_logchannel(): given a logger channel name, this calls
make_filename() and then traverses the list of logchannels in order
to find a match.
This change has made use of make_filename() and find_logchannel()
throughout to more consistently behave.
ASTERISK-25305 #close
Reported by Mark Michelson
Change-Id: I892d52954d6007d8bc453c3cbdd9235dec9c4a36
When leaving a bridge, indications on a channel could be swallowed by
the internal indication logic because it appears that the channel is on
its way to be hung up anyway. One such situation where this is
detrimental is when channels on hold are redirected out of a bridge. The
AST_CONTROL_UNHOLD indication from the bridging code is swallowed,
leaving the channel in question to still appear to be on hold.
The fix here is to modify the logic inside ast_indicate_data() to not
drop the indication if the channel is simply leaving a bridge. This way,
channels on hold redirected out of a bridge revert to their expected "in
use" state after the redirection.
ASTERISK-25418 #close
Reported by Mark Michelson
Change-Id: If6115204dfa0551c050974ee138fabd15f978949
Page uses the async method of dialing with the dial API. When a call gets
forwarded there is no calling channel available. If the predial handler
was set then the calling channel could not be put into auto-service
for the forwarded call because it doesn't exist. A crash is the result.
* Moved the callee predial parameter string processing to before the
string is passed to the dial API rather than having the dial API do it.
There are a few benefits do doing this. The first is the predial
parameter string processing doesn't need to be done for each channel
called by the dial API. The second is in async mode and the forwarded
channel is to have the predial handler executed on it then the
non-existent calling channel does not need to be present to process the
predial parameter string.
* Don't start auto-service on a non-existent calling channel to execute
the predial handler when the dial API is in async mode and forwarding a
call.
ASTERISK-25384 #close
Reported by: Chet Stevens
Change-Id: If53892b286d29f6cf955e2545b03dcffa2610981
Currently, Asterisk will log to the last configured syslog
channel in logger.conf. This is due to the fact that the
final call to openlog() supersedes all of the previous calls.
This commit removes the call to openlog() and passes the
facility to ast_log_vsyslog(), along with utilizing the
LOG_MAKEPRI macro to ensure that the message is routed to
the correct facility and with the correct priority.
ASTERISK-25407 #close
Reported by: Elazar Broad
Tested by: Elazar Broad
Change-Id: Ie2a2416bc00cce1b04e99ef40917c2011953ddd2
This patch adds support for receiving events regarding Peer status changes
and Contact status changes. This is particularly useful in scenarios where
we are subscribed to all endpoints and channels, where we often want to know
more about the state of channel technology specific items than a single
endpoint's state.
ASTERISK-24870
Change-Id: I6137459cdc25ce27efc134ad58abf065653da4e9
Now with menuselect "DEBUG_FD_LEAKS" and CLI "core show fd", a timestamp is
shown with each file descriptor. This helps to debug leaked UDP/TCP ports on
long-lived servers, for example.
ASTERISK-25405 #close
Change-Id: I968339e5155a512eba1032a5263f1ec8b5e1f80b
When changing a hint extension without removing the hint first the
device state and presence state is not updated. This causes the state
of the hint to be that of the previous extension and not the current
one. This state is kept until a state change occurs as a result of
something (presence state change, device state change).
This change updates the hint with the current device and presence
state of the new extension when it is changed. Any state callbacks
which may have been added before the hint extension is changed are
also informed of the new device and presence state if either have
changed.
ASTERISK-25394 #close
Change-Id: If268f1110290e502c73dd289c9e7e7b27bc8432f
When Asterisk translates between codecs, each with a different frame size (for
example between iLBC 30 and Speex-WB), too large frames were created by
ast_trans_frameout. Now, ast_trans_frameout is called with the correct frame
length, creating several frames when necessary. Affects all transcoding modules
which used ast_trans_frameout: GSM, iLBC, LPC10, and Speex.
ASTERISK-25353 #close
Change-Id: I2e229569d73191d66a4e43fef35432db24000212
It has been observed that on long-running busy systems, a scheduler
context can eventually hit INT_MAX for its assigned IDs and end up
overflowing into a very low negative number. When this occurs, this can
result in odd behaviors, because a negative return is interpreted by
callers as being a failure. However, the item actually was successfully
scheduled. The result may be that a freed item remains in the scheduler,
resulting in a crash at some point in the future.
The scheduler can overflow because every time that an item is added to
the scheduler, a counter is bumped and that counter's current value is
assigned as the new item's ID.
This patch introduces a new method for assigning scheduler IDs. Instead
of assigning from a counter, a queue of available IDs is maintained.
When assigning a new ID, an ID is pulled from the queue. When a
scheduler item is released, its ID is pushed back onto the queue. This
way, IDs may be reused when they become available, and the growth of ID
numbers is directly related to concurrent activity within a scheduler
context rather than the uptime of the system.
Change-Id: I532708eef8f669d823457d7fefdad9a6078b99b2
Asterisk can load and register an object type while still having an invalid
sorcery mapping. This can cause an issue when a creation call is invoked.
For example, mis-configuring PJSIP's endpoint identifier by IP address mapping
in sorcery.conf will cause the sorcery mechanism to be invalidated; however, a
subsequent ARI invocation to create the object will cause a crash, as the
internal type may not be registered as sorcery expects.
Merely checking for a NULL pointer here solves the issue.
Change-Id: I54079fb94a1440992f4735a9a1bbf1abb1c601ac
In ast_endpoint_snapshot_create(), a failure to init the
string fields results in two attempts to ao2_cleanup the
same pointer. Removed RAII_VAR to eliminate problem.
ASTERISK-25375 #close
Reported by: Scott Griepentrog
Change-Id: If4d9dfb1bbe3836b623642ec690b6d49b25e8979
When issuing the "core show hints" CLI command a combination of both
the hint extension and context is created. This uses a fixed size
buffer expecting that the extension will not exceed maximum extension
length. When the extension is actually a pattern match this constraint
does not hold true, and the extension may exceed the maximum extension
length. In this case extra characters are written past the end of the
fixed size buffer.
This change makes it so the construction of the combined hint extension
and context can not exceed the size of the buffer.
ASTERISK-25367 #close
Change-Id: Idfa1b95d0d4dc38e675be7c1de8900b3f981f499
When unreferencing a taskprocessor its reference count is checked
to determine if it should be unlinked from the taskprocessors
container and its listener shut down. In between the time when the
reference count is checked and unlinking it is possible for
another thread to jump in, find it, and get a reference to it. If
the thread then uses the taskprocessor it may find that it is not
in the state it expects.
This change locks the taskprocessors container during almost the
entire unreference operation to ensure that any other thread which
may attempt to find the taskprocessor has to wait.
ASTERISK-25295
Change-Id: Icb842db82fe1cf238da55df92e95938a4419377c
When deleting a scheduled item if the item in question is currently
executing the ast_sched_del function waits until it has completed.
This is accomplished using ast_cond_wait. Unfortunately the
ast_cond_wait function can suffer from spurious wakeups so the
predicate needs to be checked after it returns to make sure it has
really woken up as a result of being signaled.
This change adds a loop around the ast_cond_wait to make sure that
it only exits when the executing task has really completed.
ASTERISK-25355 #close
Change-Id: I51198270eb0b637c956c61aa409f46283432be61
When executing an action in a bridge it is possible for the
channel to be hung up without the bridge becoming aware of it.
This is most easily reproducible by hanging up when the bridge
is streaming DTMF due to a feature timeout. This change makes
it so after action execution the channel is checked to determine
if it has been hung up and if it has it is kicked from the bridge.
ASTERISK-25341 #close
Change-Id: I6dd8b0c3f5888da1c57afed9e8a802ae0a053062
* Make ast_rtp_codecs_payload_code() get the current mapping or create a
rx payload type mapping.
ASTERISK-25166
Reported by: Kevin Harwell
ASTERISK-17410
Reported by: Boris Fox
Change-Id: Ia4b2d45877a8f004f6ce3840e3d8afe533384e56
There are numerous problems with the current implementation of the RTP
payload type mapping in Asterisk. It uses only one mapping structure to
associate payload types to codecs. The single mapping is overkill if all
of the payload type values are well known values. Dynamic payload type
mappings do not work as well with the single mapping because RFC3264
allows each side of the link to negotiate different dynamic mappings for
what they want to receive. Not only could you have the same codec mapped
for sending and receiving on different payload types you could wind up
with the same payload type mapped to different codecs for each direction.
1) An independent payload type mapping is needed for sending and
receiving.
2) The receive mapping needs to keep track of previous mappings because of
the slack to when negotiation happens and current packets in flight using
the old mapping arrive.
3) The transmit mapping only needs to keep track of the current negotiated
values since we are sending the packets and know when the switchover takes
place.
* Needed to create ast_rtp_codecs_payload_code_tx() and make some callers
use the new function because ast_rtp_codecs_payload_code() was used for
mappings in both directions.
* Needed to create ast_rtp_codecs_payloads_xover() for cases where we need
to pass preferred codec mappings to the peer channel for early media
bridging or when we need to prefer the offered mapping that RFC3264 says
we SHOULD use.
* ast_rtp_codecs_payloads_xover() and ast_rtp_codecs_payload_code_tx() are
the only new public functions created. All the others were only used for
the tx or rx mapping direction so the function doxygen now reflects which
direction the function operates.
* chan_mgcp.c: Removed call to ast_rtp_codecs_payloads_clear() as doing
that makes no sense when processing an incoming SDP. We would be wiping
out any mappings that we set for the possible outgoing SDP we sent
earlier.
ASTERISK-25166
Reported by: Kevin Harwell
ASTERISK-17410
Reported by: Boris Fox
Change-Id: Iaf6c227bca68cb7c414cf2fd4108a8ac98bd45ac
When allocating a sorcery object, fail if the
id value was not allocated.
ASTERISK-25323
Reported by: Scott Griepentrog
Change-Id: I152133fb7545a4efcf7a0080ada77332d038669e
The built frame format in audiohook_read_frame_both() is now set to a
signed linear format before the rx and tx frames are duplicated instead of
only for the mixed audio frame duplication.
ASTERISK-25322 #close
Reported by Sean Pimental
Change-Id: I86f85b5c48c49e4e2d3b770797b9d484250a1538
Some codecs that may be a third party library to Asterisk need to have
knowledge of the format attributes that were negotiated. Unfortunately,
when the great format migration of Asterisk 13 occurred, that ability
was lost.
This patch adds an API call, ast_format_attribute_get, to the core
format API, along with updates to the unit test to check the new API
call. A new callback is also now available for format attribute modules,
such that they can provide the format attribute values they manage.
Note that the API returns a void *. This is done as the format attribute
modules themselves may store format attributes in any particular manner
they like. Care should be taken by consumers of the API to check the
return value before casting and dereferencing. Consumers will obviously
need to have a priori knowledge of the type of the format attribute as
well.
Change-Id: Ieec76883dfb46ecd7aff3dc81a52c81f4dc1b9e3
clock_gettime() is, unfortunately, not portable. But I did like that
over our usual `ts.tv_nsec = tv.tv_usec * 1000` copy/paste code we
usually do when we want a timespec and all we have is ast_tvnow().
This patch adds ast_tsnow(), which mimics ast_tvnow(), but returns a
timespec. If clock_gettime() is available, it will use that. Otherwise
ast_tsnow() falls back to using ast_tvnow().
Change-Id: Ibb1ee67ccf4826b9b76d5a5eb62e90b29b6c456e
An http request can be sent to get the existing Asterisk logs.
The command "curl -v -u user:pass -X GET 'http://localhost:8088
/ari/asterisk/logging'" can be run in the terminal to access the
newly implemented functionality.
* Retrieve all existing log channels
ASTERISK-25252
Change-Id: I7bb08b93e3b938c991f3f56cc5d188654768a808
An http request can be sent to create a log channel
in Asterisk.
The command "curl -v -u user:pass -X POST
'http://localhost:088/ari/asterisk/logging/mylog?
configuration=notice,warning'" can be run in the terminal
to access the newly implemented functionality for ARI.
* Ability to create log channels using ARI
ASTERISK-25252
Change-Id: I9a20e5c75716dfbb6b62fd3474faf55be20bd782
An http request can be sent to delete a log channel
in Asterisk.
The command "curl -v -u user:pass -X DELETE 'http://localhost:8088
/ari/asterisk/logging/mylog'" can be run in the terminal
to access the newly implemented functionally for ARI.
* Able to delete log channels using ARI
ASTERISK-25252
Change-Id: Id6eeb54ebcc511595f0418d586ff55914bc3aae6
An http request can be sent to rotate a specified log channel.
If the channel does not exist, an error response will be
returned.
The command "curl -v -u user:pass -X PUT 'http://localhost:8088
/ari/asterisk/logging/logChannelName/rotate'" can be run in the
terminal to access this new functionality.
* Added the ability to rotate log files through ARI
ASTERISK-25252
Change-Id: Iaefa21cbbc1b29effb33004ee3d89c977e76ab01
A testsuite test recently failed due to a crash that occurred in the DNS
core. The problem was that the test could not resolve an address, did
not set a result on the DNS query, and then indicated the query was
completed. The DNS core does not handle the case of a query with no
result gracefully, and so there is a crash.
This changeset makes the DNS system resolver set a result with a
zero-length answer in the case that a DNS resolution failure occurs
early. The DNS core now also will accept such a response without
treating it as invalid input. A unit test was updated to no longer treat
setting a zero-length response as off-nominal.
Change-Id: Ie56641e22debdaa61459e1c9a042e23b78affbf6
ast_rtp_codecs_get_payload() gets called once or twice for every received
RTP frame so it would be nice to not allocate an ao2 object to then have
it destroyed shortly thereafter. The ao2 object gets allocated only if
the payload type is not set by the channel driver as a negotiated value.
The issue affects chan_skinny, chan_unistim, chan_rtp, and chan_ooh323.
* Made static_RTP_PT[] an array of ao2 objects that
ast_rtp_codecs_get_payload() can return instead of an array of structs
that must be copied into a created ao2 object.
ASTERISK-25296 #close
Reported by: Richard Mudgett
Change-Id: Icb6de5cd90bfae07d44403a1352963db9109dac0
* Fix off nominial ref leak of new_type in
ast_rtp_codecs_payloads_set_m_type().
* No need to lock static_RTP_PT_lock in
ast_rtp_codecs_payloads_set_m_type() and
ast_rtp_codecs_payloads_set_rtpmap_type_rate() before the payload type
parameter sanity check.
* No need to create ast_rtp_payload_type ao2 objects with a lock since the
lock is not used.
Change-Id: I64dd1bb4dfabdc7e981e3f61448beac9bb7504d4
This event is necessary for the bridge_wait_e_options test to be able to
confirm that ringing is being played on the local channel that runs the
BridgeWait() application with the e(r) option.
ASTERISK-25292 #close
Reported by Kevin Harwell
Change-Id: Ifd3d3d2bebc73344d4b5310d0d55c7675359d72e
Currently, if a blank musiconhold.conf is used, musiconhold will fail
to start for a channel going into a holding bridge with an anticipation
of getting music on hold. That being the case, no frames will be written
to the channel and that can pose a problem for blind transfers in PJSIP
which may rely on frames being written to get past the REFER framehook.
This patch makes holding bridges start a silence generator if starting
music on hold fails and makes it so that if no music on hold functions
are installed that the ast_moh_start function will report a failure so
that consumers of that function will be able to respond appropriately.
ASTERISK-25271 #close
Change-Id: I06f066728604943cba0bb0b39fa7cf658a21cd99
(cherry picked from commit 8458b8d441)
This change adds support for the 'rtp_timeout' and 'rtp_timeout_hold'
endpoint options. These allow the channel to be hung up if RTP
is not received from the remote endpoint for a specified number of
seconds.
ASTERISK-25259 #close
Change-Id: I3f39daaa7da2596b5022737b77799d16204175b9
Commit 54b25c80c8 solved an issue where a
specific scenario involving local channels and a native local RTP bridge
could result in ringback still being heard on a calling channel even
after the call is bridged.
That commit caused many tests in the testsuite to fail with alarming
consequences, such as not sending DialBegin and DialEnd events, and
giving incorrect hangup causes during calls.
This commit reverts the previous commit and implements and alternate
solution. This new solution involves only passing AST_CONTROL_RINGING
frames across local channels if the local channel is in AST_STATE_RING.
Otherwise, the frame does not traverse the local channels. By doing
this, we can ensure that a playtones generator does not get started on
the calling channel but rather is started on the local channel on which
the ringing frame was initially indicated.
ASTERISK-25250 #close
Reported by Etienne Lessard
Change-Id: I3bc87a18a38eb2b68064f732d098edceb5c19f39
Previous changes to sample rate support in audiohooks accidentally
removed code responsible for allowing the manipulate audiohooks
to work. Without this code the manipulated frame would be dropped
and not used. This change restores it.
ASTERISK-25253 #close
Change-Id: I3ff50664cd82faac8941f976fcdcb3918a50fe13
Control frames with a -1 payload are used as a special signal to stop
playtones generators on channels. This indication is sent both by
app_dial as well as by ast_answer() when a call is answered in case any
tones were being generated on a calling channel.
This control frame type was made to stop traversing local channel pairs
as an optimization, because it was thought that it was unnecessary to
send these indications, and allowing such unnecessary control frames to
traverse the local channels would cause the local channels to optimize
away less quickly.
As it turns out, through some special magic dialplan code, it is
possible to have a tones being played on a non-local channel, and it is
important for the local channel to convey that the tones should be
stopped. The result of having tones continue to be played on the
non-local channel is that the tones play even once the channel has been
bridged. By not blocking the -1 control frame type, we can ensure that
this situation does not happen.
ASTERISK-25250 #close
Reported by Etienne Lessard
Change-Id: I0bcaac3d70b619afdbd0ca8a8dd708f33fd2f815
Due to changes in audiohooks to support different sample rates the
underlying storage of samples is in the format of the audiohook
itself and not of the format being requested. This means that if a
channel is using G722 the samples stored will be at 16kHz. If
something subsequently reads from the audiohook at a format which
is not the same sample rate as the audiohook the number of samples
needs to be adjusted.
Given the following example:
1. Channel writing into audiohook at 16kHz (as it is using G722).
2. Chanspy reading from audiohook at 8kHz.
The original code would read 160 samples from the audiohook for
each 20ms of audio. This is incorrect. Since the audio in the
audiohook is at 16kHz the actual number needing to be read is 320.
Failure to read this much would cause the audiohook to reset
itself constantly as the buffer became full.
This change adjusts the requested number of samples by determining
the duration of audio requested and then calculating how many
samples that would be in the audiohook format.
ASTERISK-25247 #close
Change-Id: Ia91ce516121882387a315fd8ee116b118b90653d
This adds an "rtp_keepalive" option for PJSIP endpoints. Similar to the
chan_sip option, this specifies an interval, in seconds, at which we
will send RTP comfort noise frames. This can be useful for keeping RTP
sessions alive as well as keeping NAT associations alive during lulls.
ASTERISK-25242 #close
Reported by Mark Michelson
Change-Id: I3b9903d99e35fe5d0b53ecc46df82c750776bc8d
Fixes for issues with the ASTERISK-24934 patch.
* Fixed ast_escape_alloc() and ast_escape_c_alloc() if the s parameter is
an empty string. If it were an empty string the functions returned NULL
as if there were a memory allocation failure. This failure caused the AMI
VarSet event to not get posted if the new value was an empty string.
* Fixed dest buffer overwrite potential in ast_escape() and
ast_escape_c(). If the dest buffer size is smaller than the space needed
by the escaped s parameter string then the dest buffer would be written
beyond the end by the nul string terminator. The num parameter was really
the dest buffer size parameter so I renamed it to size.
* Made nul terminate the dest buffer if the source string parameter s was
an empty string in ast_escape() and ast_escape_c().
* Updated ast_escape() and ast_escape_c() doxygen function description
comments to reflect reality.
* Added some more unit test cases to /main/strings/escape to cover the
empty source string issues.
ASTERISK-25255 #close
Reported by: Richard Mudgett
Change-Id: Id77fc704600ebcce81615c1200296f74de254104
An http request can be sent to retrieve information on a single
module, including the resource name, description, use count, status,
and support level.
The command "curl -v -u user:pass -X GET 'http://localhost:8088/ari
/asterisk/modules/{moduleName}'" (or something similar, depending on
configuration) can be run in the terminal to access this new
functionality.
For more information, see:
https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource
* Added new ARI functionality
* Information on a single module can now be retrieved
ASTERISK-25173
Change-Id: Ibce5a94e70ecdf4e90329cf0ba66c33a62d37463
During an attended transfer a thread is started that handles imparting the
bridge channel. From the start of the thread to when the bridge channel is
ready exists a gap that can potentially cause problems (for instance, the
channel being swapped is hung up before the replacement channel enters the
bridge thus stopping the transfer). This patch adds a condition that waits
for the impart thread to get to a point of acceptable readiness before
allowing the initiating thread to continue.
ASTERISK-24782
Reported by: John Bigelow
Change-Id: I08fe33a2560da924e676df55b181e46fca604577
This patch adds five CLI commands for the media cache:
* 'media cache show all' - display a summary of all items in the media
cache.
* 'media cache show <uri>' - display detailed information about a
single item in the media cache.
* 'media cache delete <uri>' - remove an item from the media cache, and
inform the bucket backend for the URI scheme to remove the item as
well.
* 'media cache refresh <uri>' - refresh a URI. If the item does not
exist in the media cache, the bucket backend will pull down the media
associated with the URI and create the item in the cache.
* 'media cache create <uri>' - create an item in the media cache from
some local media storage. Note that the bucket backend for the URI
scheme must still permit the item creation.
Change-Id: Id1c5707a3b8e2d96b56e4691a46a936cd171f4ae
This patch adds a new API to the Asterisk core that acts as a media
cache. The core API itself is mostly a thin wrapper around some bucket
API provided implementation that itself acts as the mechanism of
retrieval for media. The media cache API in the core provides the
following:
* A very thin in-memory cache of the active bucket_file items. Unlike a
more traditional cache, it provides no expiration mechanisms. Most
queries that hit the in-memory cache will also call into the bucket
implementations as well. The bucket implementations are responsible
for determining whether or not the active record is active and valid.
This makes sense for the most likely implementation of a media cache
backend, i.e., HTTP. The HTTP layer itself is the actual arbiter of
whether or not a record is truly active; as such, the in-memory cache
in the core has to defer to it.
* The ability to create new items in the media cache from local
resources. This allows for re-creation of items in the cache on
restart.
* Synchronization of items in the media cache to the AstDB. This
also includes various pieces of important metadata.
The API provides sufficient access that higher level APIs, such as the
file or app APIs, do not have to worry about the semantics of the bucket
APIs when needing to playback a resource.
In addition, this patch provides unit tests for the media cache API. The
unit tests use a fake bucket backend to verify correctness.
Change-Id: I11227abbf14d8929eeb140ddd101dd5c3820391e
This patch adds a new function to the bucket API for ast_bucket_file
objects, ast_bucket_file_metadata_callback. It will call ao2_callback on
the ast_bucket_file's ao2_container of metadata, calling the provided
ao2_callback_fn callback on each piece of metadata associated with the
file.
This is particularly useful when a bucket backend has added metadata,
and a higher level API wants to be aware of/access said metadata,
without knowing for sure what the key is.
Change-Id: I96f6757717f47b650df91a437f7df16406227466
Some individual fields may fail their conversion due to their default
values being invalid for their custom handlers. In particular,
configuration values that depend on others being enabled (and thus have
an empty default value) are notorious for tripping this routine up. An
example of this are any of the DTLS options for endpoints. Any of the
DTLS options will fail to be applied (as DTLS is not enabled), causing
the entire object set to be aborted.
This patch makes it so that we log a debug message when skipping a
field, and rumble on anyway.
ASTERISK-25238
Change-Id: I0bea13de79f66bf9f9ae6ece0e94a2dc1c026a76
We have a strange relationship between the parsing of format
capabilities from a string and their representation as a string. We
expect the format capabilities to be expressed as a string in the
following format:
allow = !all,ulaw,alaw
disallow = g722
While we would generate the string representation of those formats as:
allow = (ulaw|alaw)
disallow = (ulaw|alaw|g729...)
When the configuration framework needs to store values as a string, it
generates the format capabilities using the second representation; this
representation however cannot be parsed when the entry is rehydrated.
This patch fixes that by updating
ast_format_cap_update_by_allow_disallow to parse an entry as if it were
in the generated format if it has a leading '(' and a trailing ')'.
ASTERISK-25238
Change-Id: I904d43caf4cf45af06f6aee0c9e58556eb91d6ca
If a sorcery wizard does not support one of the 'optional' CRUD
operations (namely the CUD), log a WARNING message so we are aware of
why the operation failed. This also removes an assert in this case, as
the CUD operation may have been triggered by an external system, in
which case it is not a programming error but a configuration error.
Change-Id: Ifecd9df946d9deaa86235257b49c6e5e24423b53
Currently, the device state provider API will allow you to register a
device state provider with the same case insensitive name more than
once. This could cause strange issues, as the duplicate device state
providers will not be queried when a device's state has to be polled.
This patch updates the API such that a device state provider with the
same name as one that has already registered will be rejected.
Change-Id: I4a418a12280b7b6e4960bd44f302e27cd036ceb2
An http request can be sent to retrieve a list of all existing modules,
including the resource name, description, use count, status, and
support level.
The command "curl -v -u user:pass -X GET 'http://localhost:8088/ari/
asterisk/modules" (or something similar, depending on configuration)
can be run in the terminal to access this new functionality.
For more information, see:
https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource
* Added new ARI functionality
* Information on modules can now be retrieved
Change-Id: I63cbbf0ec0c3544cc45ed2a588dceabe91c5e0b0
Prior to this patch, the DNS core present in master had no default system-level
resolver implementation. Therefore, it was not possible for the DNS core to
perform resolutions unless the libunbound library was installed and the
res_resolver_unbound module was loaded.
This patch introduces a system-level DNS resolver implementation that will
register itself with the lowest consideration priority available (to ensure
that it is to be used only as a last resort). The resolver relies on low-level
DNS search functions to perform a rudimentary DNS search based on a provided
query and then supplies the search results to the DNS core.
ASTERISK-25146 #close
Reported By: Joshua Colp
Change-Id: I3b36ea17b889a98df4f8d80d50bb7ee175afa077
This patch enhances the bucket API in two ways.
First, since ast_bucket and ast_bucket_file instances are immutable, a 'clone'
operation has been added that provides a 'clone' of an existing
ast_bucket/ast_bucket_file object. Note that this makes use of the
ast_sorcery_copy operation, along with the copy callback handler on the
"bucket" and "file" object types for the bucket sorcery instance.
Second, there is a need for the bucket API to ask a wizard if an object
is stale. This is particularly useful with the upcoming media cache
enhancements, where we want to ask the backing data storage if the
object we are currently operating on has known updates. This patch adds
API calls for ast_bucket and ast_bucket_file objects, which callback
into their respective sorcery wizards via the sorcery API.
Unit tests have also been added to cover the respective
ast_bucket/ast_bucket_file clone and staleness operations.
Change-Id: Ib0240ba915ece313f1678a085a716021d75d6b4a
This patch enhances the sorcery API to allow for sorcery wizards to
determine if an object is stale. This includes the following:
* Sorcery objects now have a timestamp that is set on creation. Since
sorcery objects are immutable, this can be used by sorcery wizards to
determine if an object is stale.
* A new API call has been added, ast_sorcery_is_stale. This API call
queries the wizards associated with the object, calling a new callback
function 'is_stale'. Note that if a wizard does not support the new
callback, objects are always assumed to not be stale.
* Unit tests have been added that cover the new API call.
Change-Id: Ica93c6a4e8a06c0376ea43e00cf702920b806064
When a mapping does not exist between a sorcery.conf defined object and
a realtime mapping in extconf, currently, the user will receive a slew
of ERROR messages that don't really tell what is happening. Some ERROR
messages may even be misleading, as they occur after the sorcery API has
already given up on the attempt to load and create the sorcery object.
This patch adds a bit of debug and a useful WARNING message for when a
wizard's open callback fails for a particular object type. In the bad
configurations that resulted in this patch, this provided a 'root cause'
WARNING message that pointed in the right direction of the configuration
problem.
Change-Id: I1cc7344f2b015b8b9c85a7e6ebc8cb4753a8f80b
The recurring unit test expects the user data on a DNS query
created as a result of a recurring DNS query to be the recurring
structure itself. This is true, mostly. When invoking the user
provided callback this user data is changed to the user provided
data. This presents a race condition where the data may or may
not point to the recurring data.
This change simplifies the callback of the user provided callback
by creating a new query and populating it with the expected values.
This leaves the recurring DNS query alone and fixes the race
condition. This is more in line with how the API should be used
overall.
ASTERISK-25222 #close
Change-Id: I10fb6deec025dff097157e7ec17e6e4921778478
When running valgrind on Asterisk, it complained about:
==32423== Source and destination overlap in memcpy(0x85a920, 0x85a920, 304)
==32423== at 0x4C2F71C: memcpy@@GLIBC_2.14 (in /usr/lib/valgrind/...)
==32423== by 0x55BA91: ast_rtp_engine_unload_format (rtp_engine.c:2292)
==32423== by 0x4EEFB7: ast_format_attr_unreg_interface (format.c:1437)
The code in question is a struct assignment, which may be performed by
memcpy as a compiler optimization. It is changed to only copy the struct
contents if source and destination are different.
ASTERISK-25219 #close
Change-Id: I6d3546c326b03378ca8e9b8cefd41c16e0088b9a
If DEBUG_FD_LEAKS was used and more file descriptors than the default of
1024 were available, some DEBUG_FD_LEAKS-patched functions would
overwrite memory past the fixed-size (1024) fdleaks buffer.
This change:
- adds bounds checks to __ast_fdleak_fopen and __ast_fdleak_pipe
- consistently uses ARRAY_LEN() instead of sizeof() or 1023 or 1024
- stores pointers to constants instead of copying the contents
- reorders the fdleaks struct for possibly tighter packing
- adds a tiny bit of documentation
ASTERISK-25212 #close
Change-Id: Iacb69e7701c0f0a113786bd946cea5b6335a85e5
When a frame is queued on a channel, any failure in
ast_channel_alert_write is logged along with errno.
This change improves the diagnostic message through
aligning the errno value with actual failure cases.
ASTERISK-25224
Reported by: Andrey Biglari
Change-Id: I1bf7b3337ad392789a9f02c650589cd065d20b5b
When 8297136f was merged for ASTERISK-25040, a regression was introduced
surrounding the case sensitivity of device names within hints.
Previously, device names - such as 'sip/foo' - were compared in a case
insensitive fashion. Thus, 'sip/foo' was equivalent to 'SIP/foo'. After
that patch, only the case sensitive name would match, i.e., 'SIP/foo'.
As a result, some dialplan hints stopped working.
This patch re-introduces case insensitive matching for device names in
hints.
ASTERISK-25040
ASTERISK-25202 #close
Change-Id: If5046a7d14097e1e3c12b63092b9584bb1e9cb4c
(cherry picked from commit 96bbcf495a)
A module trying to unload needs to wait for all serializers it creates and
uses to complete processing before unloading.
ASTERISK-24907
Reported by: Kevin Harwell
Change-Id: I8c80b90f2f82754e8dbb02ddf3c9121e5e966059
Find and unlink the specified sorcery object type to complement
ast_sorcery_object_register(). Without this function you cannot
completely unload individual modules that use sorcery for configuration.
ASTERISK-24907
Reported by: Kevin Harwell
Change-Id: I1c04634fe9a90921bf676725c7d6bb2aeaab1c88
Due to the way that channels can now be moved around inside of
Asterisk it is possible for the outgoing flag of a channel to get
cleared before it has been answered. This results in the bridge
not receiving notification that the outgoing leg has been answered.
This most easily exhibits itself with DTMF based blond transfers.
Since the answer of the outgoing leg is ignored the other party
continues to receive both a locally generated ringing and the
media stream of the outgoing leg upon its answer. This results
in no media being heard.
This change removes the ignore of the answer and allows it
to pass through.
ASTERISK-25171 #close
Change-Id: I82aedcec4f89f34a2e5472086dfc9a6c775bca8e
Added checks when a unit test is registered to see that the summary and
description strings do not end with a new-line '\n' for consistency.
The check generates a warning message and will cause the
/main/test/registrations unit test to fail.
* Updated struct ast_test_info member doxygen comments.
Change-Id: I295909b6bc013ed9b6882e85c05287082497534d
After completing an attended transfer the transfer target channel was not being
hung up after leaving the bridge. Added an explicit softhangup to hangup said
channel, but only if it was previously bridged.
ASTERISK-24782 #close
Reported by: John Bigelow
Change-Id: Idde9543d56842369384a5e8c00d72a22bbc39ada
The CDR_PROP function (as well as the NoCDR application) set the
'disable all' flag (AST_CDR_FLAG_DISABLE_ALL) on the current CDR. This
flag is supposed to be applied to all CDRs that are currently in the
chain, as well as all CDRs that may be created in the future. Currently,
however, the flag is only applied to the existing CDRs in the chain; new
CDRs do not receive the 'disable all' flag. In particular, this affects
parallel dials, which generate new CDRs for each pair of channels in
the dial attempt.
This patch carries over the 'disable all' flag when it is specified on a
CDR and a new CDR is generated for the chain.
ASTERISK-24344 #close
Change-Id: I91a0f0031e4d147bdf8a68ecd08304d506fb6a0e
When a parallel dial occurs, a new CDR will be created for each dial
attempt that is made. In most circumstances, the act of creating each
CDR in the chain will include a step that updates the Party A snapshot,
which causes the context/extension of the Party A to be copied onto the
CDR object.
However, when the Party A is in a subroutine, we explicitly do *not*
copy the context/extension onto the CDR. This prevents the Macro or
GoSub routine name from blowing away the context/extension that the
channel was originally executing in. For the original CDR, this is not a
problem: the original CDR already recorded the last known 'good' state
of the channel just prior to it going into the subroutine. However, for
newly generated CDRs in a chain, there is no context/extension set on
them. Since we are in a subroutine, we will never set the Party A's
context/extension on the CDR, and we end up with a CDR with no
destination recorded on it.
This patch updates the creation of a chained CDR such that it copies
over the original CDR's context/extension. This is the last known "good"
state of the CDR, and is a reasonable starting point for the newly
generated CDR. In the case where we are not in a subroutine, subsequent
code will update the location of the CDR from the Party A information;
in the case where we are in a subroutine, the context/extension on the
original CDR is the correct information.
ASTERISK-24443 #close
Change-Id: I6a3ef0d6e458d3b9b30572feaec70f2964f3bc2a
When performing a blonde transfer the code uses the old masquerade
mechanism to move a channel around. As a result of this certain information,
such as connected line, is moved between the channels involved. Upon
completion of the move a frame is queued which is supposed to update the
connected line information on the channel. This does not occur as the
code considers it a redundant update since the masquerade operation
updated the channel (but did not inform it of the new connected line
information). The code also does not queue a connected line update
to be handled by the thread handling the channel. Without this any
other channel that may be loosely involved does not know it is
talking to a different caller.
This change does the following to resolve this:
1. The indicated connected line information is cleared upon
completion of the masquerade operation when doing a blonde transfer.
This prevents the connected line update from being considered
redundant.
2. A connected line update frame is now queued upon the completion
of the masquerade operation so any other channel loosely involved
knows that there is a different caller.
ASTERISK-25157 #close
Reported by: Joshua Colp
Change-Id: Ibb8798184a1dab3ecd35299faecc420034adbf20
All send/receive processing for a SIP transaction needs to be done under
the same threadpool serializer to prevent reentrancy problems inside
pjproject when using an external DNS resolver to process messages for the
transaction.
* Add threadpool API call to get the current serializer associated with
the worker thread.
* Pick a serializer from a pool of default serializers if the caller of
res_pjsip.c:ast_sip_push_task() does not provide one.
This is a simple way to ensure that all outgoing SIP request messages are
processed under a serializer. Otherwise, any place where a pushed task is
done that would result in an outgoing out-of-dialog request would need to
be modified to supply a serializer. Serializers from the default
serializer pool are picked in a round robin sequence for simplicity.
A side effect is that the default serializer pool will limit the growth of
the thread pool from random tasks. This is not necessarily a bad thing.
* Made pjsip_resolver.c use the requesting thread's serializer to execute
the async callback.
* Made pjsip_distributor.c save the thread's serializer name on the
outgoing request tdata struct so the response can be processed under the
same serializer.
ASTERISK-25115 #close
Reported by: John Bigelow
Change-Id: Iea71c16ce1132017b5791635e198b8c27973f40a
* Fix query_set destruction before we are done kicking the queries off.
* Fixed no queries requested handling.
* Add empty queries request unit test.
* Added missing allocation check in ast_dns_query_set_add().
* Made initial pjsip resolving query vector slightly larger.
ASTERISK-25115
Reported by: John Bigelow
Change-Id: Ie8be8347d0992e93946d72b6e7b1299727b038f2
Although ast_context_find, ast_context_find_or_create and
ast_context_destroy perform locking of the contexts table,
any context pointer can become invalid at any time that the
contexts table is unlocked. This change adds locking around
all complete operations involving these functions.
Places where ast_context_find was followed by ast_context_destroy
have been replaced with calls ast_context_destroy_by_name.
ASTERISK-25094 #close
Reported by: Corey Farrell
Change-Id: I1866b6787730c9c4f3f836b6133ffe9c820734fa
So this issue is a bit complicated. Since it is possible to pass values to AMI
that contain a '\r\n' (or other similar sequences) these values need to be
escaped. One way to solve this is to escape the values and then pass the escaped
values to the AMI variable parameter string building function. However, this
puts the onus on the pre-build function to escape all string values. This
potentially requires a fair amount of changes along with a lot of string
allocations/freeing for all values.
Surely there is a way to push this complexity down a level into the string
building function itself? This of course is possible, but ends up requiring a
way to distinguish between strings that need to be escaped and those that don't.
The best way to handle this is by introducing a new format specifier in the
format string. For instance a %s (no escape) and %S (escape). However, that is
a bit weird and unexpected.
So faced with those possibilities this patch implements a limited version of the
first option. Instead of attempting to escape all string values this patch only
escapes those values that make sense. This approach limits the number of changes
and doesn't suffer from the odd format specifier problem.
ASTERISK-24934 #close
Reported by: warren smith
Change-Id: Ib55a5b84fe0481b0f2caaaab68c566f392c0aac0
* Add some type casting so tv_usec can really be a long, instead of
some strange platform specific type.
* Add some .dylib style files to .gitignore.
* Switch from using -Xlinker to -Wl,. For [reasons unknown][], newer
versions of GCC, when compiling the Homebrew formula for Asterisk,
are not properly passing the -Xlinker options to the linker. Given
that -Wl, does exactly the [same thing][], and does it properly, this
patch changes the -Xlinker options to use -Wl, instead.
[reasons unknown]: http://bit.ly/1SUbEYx
[same thing]: https://gcc.gnu.org/onlinedocs/gcc/Link-Options.html
Change-Id: Id5e6b3c6cc86282ea5fca630dc3991137c5bf4dd
When an endpoint was created, it's messages were being forwarded to
both the tech endpoint topic and the all endpoints topic. Since
the tech topic was also forwarded to all, this was resulting in
duplicate messages whenever an endpoint published. This patch
causes the endpoint to only forward to the tech topic and lets
the tech topic forward to all.
To accomplish this, the existing stasis_cp_single_create function
(which both creates and forwards) was cloned and split into 2
functions, one that creates the topic and one that sets up the
forwarding. This allows endpoint_internal_create to create
the topic from the endpoint_all cache without forwarding it there,
then allows it to do the forward to the tech's topic.
ASTERISK-25137 #close
Reported-by: Vitezslav Novy
ASTERISK-25116 #close
Reported-by: George Joseph <george.joseph@fairview5.com>
Tested-by: George Joseph <george.joseph@fairview5.com>
Change-Id: I26d7d4926a0861748fd3bdffe316b75b549a801c
Add a new ContactStatus AMI event.
Publish the following status/state changes:
Created
Removed
Reachable
Unreachable
Unknown
Contact URI, new status/state, aor and endpoint names, and the
last qualify rtt result are included in the event.
ASTERISK-25114 #close
Change-Id: Id25aae5f7122facba183273efb3e8f36c20fb61e
Reported-by: George Joseph <george.joseph@fairview5.com>
Tested-by: George Joseph <george.joseph@fairview5.com>
The cache creation callback function expects to receive a sorcery_details
structure and not just a standalone object.
Change-Id: I3e4a5a137cb25292eb52d7a14cbb6daa09213450
The code in astobj2_hash.c wrongly assumed that abs(int) is always > 0.
However, abs(INT_MIN) = INT_MIN and is still negative, as well as
abs(INT_MIN) % num_buckets, and as a result this led to a crash.
One way to trigger the bug is using host=::80 or 0.0.0.128 in peer
configuration section in chan_sip or chan_iax.
This patch takes the remainder before applying abs, so that bucket
number is always in range.
ASTERISK-25100 #close
Reported by: Mark Petersen
Change-Id: Id6981400ad526f47e10bcf7b847b62bd2785e899
Many uses of stasis_unsubscribe in modules can be reached through unload.
These have been switched to stasis_unsubscribe_and_join.
Some subscription callbacks do nothing, for these I've created a noop
callback function in stasis.c. This is used by some modules that monitor
MWI topics in order to enable cache, since the callback does not become
invalid after dlclose it is safe to use stasis_unsubscribe on these, even
during module unload.
ASTERISK-25121 #close
Change-Id: Ifc2549fbd8eef7d703c222978e8f452e2972189c
Modify ao2_weakproxy_subscribe so each new subscription is added
to the head of the list. This ensures that when other objects
are allocated and use a subscription to the weakproxy for cleanup,
cleanup will occur in the correct order.
ASTERISK-25120 #close
Change-Id: Ie0476f08ec21330de1b3f5a2dd3d9eb683df3d3d
This change adds a basic res_sorcery_memory_cache module which implements
configuration option parsing, configuration file parsing for threading,
sorcery interface implementation, and unit tests.
Objects can be added, updated, deleted, and retrieved from the memory
cache. Automatic expiration and stale handling will be added in the
future.
Note that unit tests exist within the module itself in case the
threading done as a result of expiration results in asynchronous
actions (which it likely will). Providing access and a notification
mechanism for an external test module would be complicated and
not worth it.
ASTERISK-25067 #close
Reported by: Matt Jordan
Change-Id: Id8a6a357ef5a83d466f81eee56a67d13eeb118b9
Reset options to default values before reloading config. This ensures
that if a setting is removed or commented out of the configuration file
it is unset on reload.
ASTERISK-25112 #close
Reported by: Corey Farrell
Change-Id: Id24bb1fb0885c2c14cf8bd6f69a0c2ee7cd6c5bd
If a channel hangs up while an audio file is playing, there's
no need to clutter up the logs with a warning so suppress it
if ast_check_hangup returns true.
Also, change warning to debug/2 in file.c if writing a frame
fails. Same reasoning.
Change-Id: I2e66191af3c5b6e951c98e8f1c3fe3cf2cf7ed89
Reported-by: George Joseph <george.joseph@fairview5.com>
Tested-by: George Joseph <george.joseph@fairview5.com>
channels/chan_iax.c: Prevent the deadlock between iax2_hangup and send_lagrq/
send_ping. This deadlock happens because the scheduled task send_lagrq(or
send_ping) starts execution after the call hangup procedure starts but before
it deletes the tasks in the scheduler.
The solution is to delete scheduled lagrq (and ping) task asynchronously
(i.e. schedule AST_SCHED_DEL for these tasks); By this, AST_SCHED_DEL will
be called in a new context (doesn't have callno locked).
This commit also cleans up the procedure of sending LAGRQ and PING.
main/sched.c: Do not assert when deleting non existant entry from scheduler.
This assert seems to be the reason for a lot of awkward code to avoid it.
ASTERISK-24983 #close
Reported by: Y Ateya
Change-Id: I03bec1fc8faacb89630269e935fa667c6d6c080c
Currently, everytime a sample rate change occurs (on read or write) the
associated factory buffers are reset. If the requested sample rate on a
read differed from that of a write then the buffers are continually reset
on every read and write. This has the side effect of emptying the buffer,
thus there being no data to read and then write to a file in the case of
call recording.
This patch fixes it so that an audiohook_list's rate always maintains the
maximum sample rate among hooks and formats. Audiohook sample rates are
only overwritten by this value when slin native compatibility is turned on.
Also, the audiohook sample rate can only overwrite the list's sample rate
when its rate is greater than that of the list or if compatibility is
turned off. This keeps the rate from constantly switching/resetting.
ASTERISK-24944 #close
Reported by: Ronald Raikes
Change-Id: Idab4dfef068a7922c09cc631dda27bc920a6c76f
This patch fixes a number of errors and warning messages in the doxygen
log. Specifically, it addresses:
* A number of files incorrectly places a '\brief' tag immediately after
a '\file' tag. Doing so emits a warning, as '\file' takes an optional
argument specifying which file the doxygen comment is for. As '\brief'
is not a file, doxygen was unamused.
* A grouping of Stasis Topics and Messages in rtp_engine.h was
incorrectly terminated. We now correctly terminate the grouping, which
prevents members of rtp_engine.h from showing up in the wrong group.
* Group indicators which are not part of the Stasis Topics and Messages
group were removed. Group indicators without an \addtogroup or
\ingroup have no meaning.
Change-Id: Ia1415ffec6767e27233ae1cae5ed5970de5656d4
The config wizard was always pulling the first occurrence of
a variable from an ast_variable list but this gets the template
value from the list instead of any overridden value. This patch
creates ast_variable_find_last_in_list() in config.c and updates
res_pjsip_config_wizard to use it instead of
ast_variable_find_in_list. Now the overridden values, where they
exist, are used instead of template variables.
Updated test_config to test the new API.
ASTERISK-25089 #close
Reported-by: George Joseph <george.joseph@fairview5.com>
Tested-by: George Joseph <george.joseph@fairview5.com>
Change-Id: Ifa7ddefc956a463923ee6839dd1ebe021c299de4
When the new Bridging API was implemented, the workspace variable
changed to a malloc'd string, causing sizeof() to always be 8 (char).
Revert back to stored on stack string for workspace.
ASTERISK-25090 #close
Change-Id: I51e610ae87371df771ce7693a955510efb90f8f7
When a client connects to a server via SSL/TLS, the server commonly utilizes an
RSA key-pair. However, other such algorithms exist (i.e. DSA and ECDSA), and if
the server socket is configured with a certificate for either one of those, it
would lose its compatibility with RSA-only clients.
Now, the server socket can be configured with up to one RSA, ECDSA and DSA key
each. For example, if a client is not compatible with SHA-2 hashed certificates
like Nokia mobile phones, the server socket still can use RSA/SHA-1 for legacy
clients and ECDSA/SHA-2 for everyone else.
ASTERISK-24815 #close
Reported by: Alexander Traud
patches:
tls_rsa_ecc_dsa.patch uploaded by Alexander Traud (License 6520)
Change-Id: Iada5e00d326db5ef86e0af7069b4dfa1b979da9a
verification.
This way one X.509 certificate can be used for hosts that
can be reached under multiple DNS names or for multiple hosts.
Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name>
ASTERISK-25063 #close
Change-Id: I13302c80490a0b44c43f1b45376c9bd7b15a538f
The message channel is a special channel that doesn't actually process frames.
However, certain actions can cause frames to be placed in the channel's read
queue including the Hangup application which is called on the channel after
each message is processed. Since the channel will continually be reused for
many messages, it's necessary to flush these frames at some point.
ASTERISK-25083 #close
Reported by: Jonathan Rose
Change-Id: Idf18df73ccd8c220be38743335b5c79c2a4c0d0f
There are 3 ways that calls directly to standard allocator functions can
be dealt with:
1. Block their use, cause them to generate an error. This is the default.
2. Replace them with the Asterisk equivalent function calls.
3. Leave them alone.
This change allows one of these 3 options to be selected by any source.
The source just needs to define ASTMM_LIBC to ASTMM_BLOCK, ASTMM_REDIRECT,
or ASTMM_IGNORE to use option 1, 2 or 3 respectively. Normally ASTMM_BLOCK
is the correct option, so it is default when ASTMM_LIBC is not defined.
In some cases when building 3rd party code it is desirable to have it use
Asterisk functions, without changing the whole source - ASTMM_REDIRECT
accomplishes this. When using 3rd party libraries sometimes a static
inline function will make use of malloc or free. In these cases it may
be unsafe to replace the allocator in the header, as it's possible the
memory could be freed by the library using standard allocators. For
those cases ASTMM_IGNORE is needed.
Change-Id: I8afef4bc7f3b93914263ae27d3a5858b69663fc7
Previous versions of Asterisk processed command-line options before
processing asterisk.conf. This meant that if an option was set in
asterisk.conf, it could not be overridden with the equivelent command
line option. This change causes Asterisk to process the command-line
twice. First it processes options that are needed to load asterisk.conf,
then it processes the remaining options after the config is read.
This changes the function of -X slightly. Previously using -X without
disabling execincludes in asterisk.conf caused #exec to be usable in any
config. Now -X only enables #exec for the load of asterisk.conf, if it
is wanted in the rest of the system it must be enabled with execincludes
in asterisk.conf. Updated 'asterisk -h' and 'man asterisk' to reflect
the limited function of -X.
ASTERISK-25042 #close
Reported by: Corey Farrell
Change-Id: I1450d45c15b4467274b871914d893ed4f6564cd7
Currently you can 'apply' a wizard to an object type but the wizard
always goes at the end of the object type's wizard list. This patch
adds a new ast_sorcery_insert_wizard_mapping function that allows
you to insert a wizard anyplace in the list. I.E. You could
add a caching wizard to an object type and place it before all
wizards.
ast_sorcery_get_wizard_mapping_count and
ast_sorcery_get_wizard_mapping were added to allow examination
of the mapping list.
ast_sorcery_remove_mapping was added to remove a mapping by name.
As part of this patch, the object type's wizard list was converted
from an ao2_container to an AST_VECTOR_RW.
A new test was added to test_sorcery for this capability.
ASTERISK-25044 #close
Change-Id: I9d2469a9296b2698082c0989e25e6848dc403b57
The code which reads asterisk.conf supports processing the debug
option with ast_true, but ast_true returns -1. This causes debug
to still be off, convert to 1 so debug will be on as requested.
ASTERISK-25042
Reported by: Corey Farrell
Change-Id: I3c898b7d082d914b057e111b9357fde46bad9ed6
The DNS SRV sorting code currently has an issue when records with a priority
of zero exist with records of a non-zero priority. This occurs because the
sorting code considers zero to mean unset when in reality is a valid
value. If the current priority is zero it will get replaced with any remaining
record that has a priority of non-zero, until no records of those exist after
which the records of priority zero are handled.
This change makes it so that the priority of the first remaining record is
the current starting priority. There is also a small optimization to prevent
iterating records when the starting priority is already zero.
Change-Id: I103511f35b50428f770bd4db3ffef70fb6f82d35
Fix the alphabetic order added on ast_manager_register_struct. The order
for struct manager_action added is not working, this change fixes the
problem.
Change-Id: I149da0cd06c3c4445d7516cc303358e9f26f8b4b
A crash happens with this sequence of steps:
1) Party A is connected to party B.
2) Party B starts a DTMF attended transfer.
3) Party A hangs up while party B is dialing party C.
When party A hangs up the bridge that party A and party B are in is
dissolved and party B is kicked out of the bridge. When party B finishes
dialing party C he attempts to move to the new bridge with party C. Since
party B is no longer in a bridge the attempted move dereferences a NULL
bridge_channel pointer and crashes.
* Made the hold(), unhold(), ringing(), and the bridge_move() functions
tolerant of the channel not being in a bridge. The assertion that party B
is always in a bridge is not true if the bridged peer of party B hangs up
and dissolves the bridge. Being tolerant of not being in a bridge allows
the peer hangup stimulus to be processed by the FSM.
* Made the bridge_move() function return void since where the return value
for a failed move was checked generated a FSM coding ERROR message for a
normal off-nominal condition.
* Eliminated most uses of RAII_VAR in bridge_basic.c.
ASTERISK-25003 #close
Reported by: Artem Volodin
Change-Id: Ie2c1b14e5e647d4ea6de300bf56d69805d7bcada
ERR_remove_state was deprecated with OpenSSL 1.0.0 and was replaced by
ERR_remove_thread_state. ERR_load_SSL_strings and ERR_load_BIO_strings were
called by SSL_load_error_strings already and got removed. These changes allow
OpenSSL forks like BoringSSL to be used with Asterisk.
ASTERISK-25043 #close
Reported by: Alexander Traud
patches:
asterisk_with_BoringSSL.patch uploaded by Alexander Traud (License 6520)
Change-Id: If1c0871ece21a7e0763fafbd2fa023ae49d4d629
A recent change went into Asterisk which added reference counts to the
channels stored in a dial masquerade datastore. Unfortunately this
included a reference to the caller in a dialing operation. While all
of the dialed targets have the datastore removed from them upon dialing
completion this did not occur for the caller, causing it to have a
reference to itself that could go never go away (as it depended on
the destruction of the datastore which only happened when the channel
was destroyed). This resulted in the caller channel remaining on the
system despite it having hung up.
This change does the following to fix this issue:
1. The dial masquerade datastore is now removed from the caller upon
dialing completion, just like the dialed targets.
2. Upon destruction of the caller all the dialed targets are also
removed from the dial masquerade datastore (just in case).
3. The reference to the caller has been removed as it should not be
possible for the datastore to now be valid/useful after the lifetime
of the caller has ended.
ASTERISK-25025 #close
Change-Id: I1ef4ca5ca04980028604cc2af5d2992ac3431b3f
* Pass module to ast_cli_register and ast_cli_register_multiple.
* Add a module reference before executing any CLI callback, remove
the reference when complete.
ASTERISK-25049 #close
Reported by: Corey Farrell
Change-Id: I7aafc7c9f2b912918f28fe51d51e9e8a755750e3
ast_module_info->self is often needed to register items with the core. Many
modules have ad-hoc code to make this pointer available to auxiliary sources.
This change updates the module build process to make the needed information
available to all sources in a module.
ASTERISK-25056 #close
Reported by: Corey Farrell
Change-Id: I18c8cd58fbcb1b708425f6757becaeca9fa91815
Renamed AST_VECTOR_INSERT to AST_VECTOR_REPLACE because it really
does replace not insert. The few users of AST_VECTOR_INSERT were
refactored. Because these are macros, there should be no ABI
compatibility issues.
Added AST_VECTOR_INSERT_AT that actually inserts an element into the
vector at a specific index pushing existing elements to the right.
Added AST_VECTOR_GET_CMP that can retrieve from the vector based
on a user-provided compare function.
Added AST_VECTOR_CALLBACK function that will execute a function
for each element in the vector. Similar to ao2_callback and
ao2_callback_data functions although the vector callback can take
a variable number of arguments. This should allow easy migration
to a vector where a container might be too heavy.
Added read/write locked vector and lock manipulation macros.
Added unit tests.
ASTERISK-25045 #close
Change-Id: I2e07ecc709d2f5f91bcab8904e5e9340609b00e0
This adds a test that will fail if any test failed to register. Also fail
if any test registration produced a warning about missing a leading or
trailing slash.
ASTERISK-25053 #close
Reported by: Corey Farrell
Change-Id: I93e50b8fcbcfa7f1f5b41b2c44a51685c09529c3
Format interfaces cannot be unregistered, so the modules that provide them
need to be held open except by shutdown.
ASTERISK-25054 #close
Reported by: Corey Farrell
Change-Id: Iadbd9675bf0d30b8fded5a739b163db3ea2db8f3
A few cases exist where headers of optional_api provders are included but
not needed. This causes unneeded calls to ast_optional_api_use.
* Don't include optional_api.h from sip_api.h.
* Move 'struct ast_channel_monitor' to channel.h.
* Don't include monitor.h from chan_sip.c, channel.c or features.c.
The move of struct ast_channel_monitor is needed since channel.c depends on
it. This has no effect on users of monitor.h since channel.h is included
from monitor.h.
ASTERISK-25051 #close
Reported by: Corey Farrell
Change-Id: I53ea65a9fc9693c89f8bcfd6120649bfcfbc3478
When using the force black background command-line option or configuration
option an invalid reset sequence is sent following a coloured output item
in the CLI, the result is that the colour is not 'turned off' and continues
until the next non-default coloured text output.
A reset sequence is already defined in term.c, but the ast_term_reset
function doesn't use it, instead building it's own invalid sequence and
returning that.
This patch changes that behaviour, removing the building of a reset sequence
and instead using the pre-built constant 'enddata' which is a suitable reset
sequence for this purpose.
ASTERISK-24896 #close
Reported by: Dan Tucny
Change-Id: I56323899123ae3264900389cae1f5b252aa3bf43
This ensures that refdebug is initialized before AO2_DEBUG if
both are enabled, since AO2_DEBUG allocates a container.
This change also makes AO2_DEBUG initialization critical, a
failure will abort Asterisk startup. This is needed since
the failure would be caused by reg_containers allocation
failure, and that would result in a segmentation fault by
ao2_container_register later in startup.
ASTERISK-25048 #close
Reported by: Corey Farrell
Change-Id: I9a243ea3fc5653b48b931ba6d61971cb2e530244
The PBX core maintains two hash tables for hints: a container of the
actual hints (hints), along with a container of devices that are watching that
hint (hintdevices). When a dialplan reload occurs, each hint in the hints
container is destroyed; this requires a lookup in the container of devices to
find the device => hint mapping object. In the current code, this performs an
ao2_callback, iterating over each of the device to hint objects in the
hintdevices container. For a large number of hints, this is extremely
expensive: dialplan reloads with 20000 hints could take several minutes
in just this phase.
This patch improves the performance of this step in the dialplan reloads
by caching which devices are watching a hint on the hint object itself.
Since we don't want to create a circular reference, we just cache the
name of the device. This allows us to perform a smarter ao2_callback on
the hintdevices container during hint removal, hashing on the name of the
device and returning an iterator to the matching names. The overall
performance improvement is rather large, taking this step down to a number of
seconds as opposed to minutes.
In addition, this patch also registers the hint containers in the PBX
core with the astobj2 library. This allows for reasonable debugging to
hash collisions in those containers.
ASTERISK-25040 #close
Reported by: Matt Jordan
Change-Id: Iedfc97a69d21070c50fca42275d7b3e714e59360
Scenario:
Alice calls Bob. Bob performs a blond transfer to Carol. Carol rejects
the incoming call (or some other immediate circumstance causes Carol not
to answer the call)
What occurs in this case is that when the bridge between Alice and Bob
breaks, Alice is told to masquerade into Bob's channel that had placed
the call to Carol. The actual masquerade goes down without a hitch.
However, a channel fixup callback that attempts to publish dial events
over Stasis has a crash. The reason for this crash is that the datastore
on Bob's channel that placed the outbound call to Carol only had a bare
pointer to Carol's channel. Since Carol rejected the incoming call,
Carol's channel has been hung up and freed, meaning accessing her
channel results in a crash.
The fix here is simple. The dial fixup code has been altered to hold
references to the involved channels and to drop those references when
freeing data.
ASTERISK-25025 #close
Reported by Chet Stevens
Change-Id: I54eedda207b8ec7a69263353b43abe5746aea197
This patch has two main purposes:
1) Improve warning messages when ACLs are configured improperly.
2) Prevent misconfigured ACLs from allowing potentially unwanted
traffic.
To acomplish point (2) in most cases, whatever configuration object that
the ACL belonged to was not allowed to load.
The one exception is res_pjsip_acl. In that case, ACLs are their own
configuration object. Furthermore, the module loading code has no
indication that a ACL configuration had a failure. So the tactic taken
here is to create an ACL that just blocks everything.
ASTERISK-24969
Reported by Corey Farrell
Change-Id: I2ebcb6959cefad03cea4d81401be946203fcacae
The patch in 0b6410c4f8 did correctly fix a memory leak of the DTLS
structures in the RTP engine. However, when a 'core reload' is issued, a
double free of the memory pointed to by the char *'s in the DTLS
configuration struct can occur, as ast_rtp_dtls_cfg_free does not set
the pointers to NULL when they are freed.
This patch sets those pointers to NULL, preventing a second call to
ast_rtp_dtls_cfg_free from corrupting memory.
ASTERISK-25022
Change-Id: I820471e6070a37e3c26f760118c86770e12f6115
This function allows code to run ao2_ref against the real
object associated with a weakproxy. It is useful when
all of the following conditions are true:
* You have a pointer to weakproxy.
* You do not have or need a pointer to the real object.
* You need to ensure the real object exists and is not
destroyed during a process.
In this case it's wasteful to store a pointer to the real
object just for the sake of releasing it later.
Change-Id: I38a319b83314de75be74207a8771aab269bcca46
This switches files used to generate other sources to use the new
ASTERISK_REGISTER_FILE macro.
ASTERISK-25026 #close
Reported by: Corey Farrell
Change-Id: Ieb2537b83421cad07c8955e5f90c405ccf079740
ao2 ref leak in res_rtp_asterisk.c when a DTLS policy is created.
The resources are linked into a table, but the original alloc refs
are never released. ast_strdup leak in rtp_engine.c. If
ast_rtp_dtls_cfg_copy() is called twice on the same destination struct,
a pointer to an alloc'd string is overwritten before the string is free'd.
ASTERISK-25022
Reported by: one47
Change-Id: I62a8ceb8679709f6c3769136dc6aa9a68202ff9b
* The REF_DEBUG compiler flag no longer has any effect on code that uses
Astobj2. It is used to determine if reference debugging is enabled by
default. Reference debugging can be enabled or disabled in asterisk.conf.
* Caller information is provided in logger errors for ao2 bad magic numbers.
* Optimizes AO2 by merging internal functions with the public counterpart.
This was possible now that we no longer require a dual ABI.
ASTERISK-24974 #close
Reported by: Corey Farrell
Change-Id: Icf3552721fe999365ba8a8cf00a965aa6b897cc1
clang can warn about a so called tautological-compare, when it finds
comparisons which are logically always true, and are therefor deemed
unnecessary.
Exanple:
unsigned int x = 4;
if (x > 0) // x is always going to be bigger than 0
Enum Case:
Each enumeration is its own type. Enums are an integer type but they
do not have to be *signed*. C leaves it up to the compiler as an
implementation option what to consider the integer type of a particu-
lar enumeration is. Gcc treats an enum without negative values as
an int while clang treats this enum as an unsigned int.
rmudgett & mmichelson: cast the enum to (unsigned int) in assert.
The cast does have an effect. For gcc, which seems to treat all enums
as int, the cast to unsigned int will eliminate the possibility of
negative values being allowed. For clang, which seems to treat enums
without any negative members as unsigned int, the cast will have no
effect. If for some reason in the future a negative value is ever
added to the enum the assert will still catch the negative value.
ASTERISK-24917
Change-Id: I0557ae0154a0b7de68883848a609309cdf0aee6a
__adjust_lock doesn't check for invalid objects, and doesn't have an
appropriate return value for invalid objects. Most callers of
__adjust_lock pass objects that have already been confirmed valid,
this change adds checks before the remaining calls.
ASTERISK-24997 #close
Reported by: Corey Farrell
Change-Id: I669100f87937cc3f867cec56a27ae9c01292908f
The query set documentation states that upon completion queries can be
retrieved for the lifetime of the query set. This is a reasonable
expectation but does not currently occur. This was originally done
to resolve a circular reference between queries and query sets, but
in practice the query can be kept.
This change makes it so a query does not have a reference to the
query set until it begins resolving. It also makes it so that the
reference is given up upon the query being completed. This allows
the queries to remain for the lifetime of the query set. As the
query set on the query is only useful to the query set functionality
and only for the lifetime that the query is resolving this is safe
to do.
ASTERISK-24994 #close
Reported by: Joshua Colp
Change-Id: I54e09c0cb45475896654e7835394524e816d1aa0
Fix a crash that could occur in __ast_channel_internal_alloc if
ao2_alloc fails.
ASTERISK-24991 #close
Change-Id: I4ca89189eb22f907408cb87d0a1645cfe1314a90
This change modifies how the the output from a CLI command is sent
to a client over AMI.
Output from the CLI command is now sent as a series of zero-or-more
Output: headers.
Additionally, commands that fail to execute (eg: no such command,
invalid syntax etc.) now cause an Error response instead of Success.
If the command executed successfully, but the manager unable to
provide the output the reason will be included in the Message:
header. Otherwise it will contain 'Command output follows'.
Depends on a new version of starpy (> 1.0.2) that supports the new
output format.
See pull-request https://github.com/asterisk/starpy/pull/34
ASTERISK-24730
Change-Id: I6718d95490f0a6b3f171c1a5cdad9207f9a44888
When a PBX registrar is unloaded, it will fail to remove its extension from
the context root_table if a dialplan application used by that extension is
still loaded. This can be the case for AGI, which can be unloaded after several
of the standard PBX providers. Often, this is harmless; however, if the
extension's priorities are removed during the failed unloading *and* the
dialplan application later unregisters, it leaves a ticking timebomb for the
next PBX provider that attempts to iterate over the extensions. When that
occurs, the peer_table pointer on the extension will already be set to NULL.
The current code does not check to see if the pointer is NULL before passing
it to a hashtab function this is not NULL tolerant.
Since it is possible for the peer_table to be NULL when we normally would not
expect that to be the case, the solution in this patch is to simply skip over
processing an extension's priorities if peer_table is NULL.
Prior to this patch, the tests/pbx/callerid_match test would crash during
module unload. With this patch, the test no longer crashes after running.
ASTERISK-24774 #close
Reported by: Corey Farrell
Change-Id: I2bbeecb7e0f77bac303a1b9135e4cdb4db6d4c40
A potential problem that can arise is the following:
* Bob's phone is programmed to automatically forward to Carol.
* Carol's phone is programmed to automatically forward to Bob.
* Alice calls Bob.
If left unchecked, this results in an endless loops of call forwards
that would eventually result in some sort of fiery crash.
Asterisk's method of solving this issue was to track which interfaces
had been dialed. If a destination were dialed a second time, then
the attempt to call that destination would fail since a loop was
detected.
The problem with this method is that call forwarding has evolved. Some
SIP phones allow for a user to manually forward an incoming call to an
ad-hoc destination. This can mean that:
* There are legitimate use cases where a device may be dialed multiple
times, or
* There can be human error when forwarding calls.
This change removes the old method of detecting forwarding loops in
favor of keeping a count of the number of destinations a channel has
dialed on a particular branch of a call. If the number exceeds the
set number of max forwards, then the call fails. This approach has
the following advantages over the old:
* It is much simpler.
* It can detect loops involving local channels.
* It is user configurable.
The only disadvantage it has is that in the case where there is a
legitimate forwarding loop present, it takes longer to detect it.
However, the forwarding loop is still properly detected and the
call is cleaned up as it should be.
Address review feedback on gerrit.
* Correct "mfgium" to "Digium"
* Decrement max forwards by one in the case where allocation of the
max forwards datastore is required.
* Remove irrelevant code change from pjsip_global_headers.c
ASTERISK-24958 #close
Change-Id: Ia7e4b7cd3bccfbd34d9a859838356931bba56c23
* changes:
res_pjsip: Add global option to limit the maximum time for initial qualifies
pjsip_options: Add qualify_timeout processing and eventing
res_pjsip: Refactor endpt_send_request to include transaction timeout
Due to a race condition there was a chance that during an attended transfer the
channel's application would return NULL. This, of course, would cause a crash
when attempting to access the memory. This patch retrieves the channel's app
at an earlier time in processing in hopes that the app name is available.
However, if it is not then "unknown" is used instead. Since some string value
is now always present the crash can no longer occur.
ASTERISK-24869 #close
Reported by: viniciusfontes
Review: https://gerrit.asterisk.org/#/c/133/
Change-Id: I5134b84c4524906d8148817719d76ffb306488ac
This is the second follow-on to https://reviewboard.asterisk.org/r/4572/ and the
discussion at
http://lists.digium.com/pipermail/asterisk-dev/2015-March/073921.html
The basic issues are that changes in contact status don't cause events to be
emitted for the associated endpoint. Only dynamic contact add/delete actions
update the endpoint. Also, the qualify timeout is fixed by pjsip at 32 seconds
which is a long time.
This patch makes use of the new transaction timeout feature in r4585 and
provides the following capabilities...
1. A new aor/contact variable 'qualify_timeout' has been added that allows the
user to specify the maximum time in milliseconds to wait for a response to an
OPTIONS message. The default is 3000ms. When the timer expires, the contact is
marked unavailable.
2. Contact status changes are now propagated up to the endpoint as follows...
When any contact is 'Available', the endpoint is marked as 'Reachable'. When
all contacts are 'Unavailable', the endpoint is marked as 'Unreachable'. The
existing endpoint events are generated appropriately.
ASTERISK-24863 #close
Change-Id: Id0ce0528e58014da1324856ea537e7765466044a
Tested-by: Dmitriy Serov
Tested-by: George Joseph <george.joseph@fairview5.com>
This change adds the following:
1. A query set implementation. This is an API that allows queries to be executed in parallel and once all have completed a callback is invoked.
2. Unit tests for the query set implementation.
3. An external PJSIP resolver which uses the DNS core API to do NAPTR, SRV, AAAA, and A lookups.
For the resolver it will do NAPTR, SRV, and AAAA/A lookups in parallel. If NAPTR or SRV
are available it will then do more queries. And so on. Preference is NAPTR > SRV > AAAA/A,
with IPv6 preferred over IPv4. For transport it will prefer TLS > TCP > UDP if no explicit
transport has been provided. Configured transports on the system are taken into account to
eliminate resolved addresses which have no hope of completing.
ASTERISK-24947 #close
Reported by: Joshua Colp
Change-Id: I56cb03ce4f9d3d600776f36928e0b3e379b5d71e
When AMI receives a line that is 1025 bytes long, it sends two error
messages. Copy the last byte in the buffer to the first postiion,
set the length to 1.
ASTERISK-20524 #close
Reported by: David M. Lee
Change-Id: Ifda403e2713b59582c715229814fd64a0733c5ea
This implements "weak" references. The weakproxy object is a real ao2 with
normal reference counting of its own. When a weakproxy is pointed to a normal
object they hold references to each other. The normal object is automatically
freed when a single reference remains (the weakproxy). The weakproxy also
supports subscriptions that will notify callbacks when it does not point
to any real object.
ASTERISK-24936 #close
Reported by: Corey Farrell
Change-Id: Ib9f73c02262488d314d9d9d62f58165b9ec43c67
Git does not support the ability to replace a token with a version
string during check-in. While it does have support for replacing a
token on clone, this is somewhat sub-optimal: the token is replaced
with the object hash, which is not particularly easy for human
consumption. What's more, in practice, the source file version was often
not terribly useful. Generally, when triaging bugs, the overall version
of Asterisk is far more useful than an individual SVN version of a file. As a
result, this patch removes Asterisk's support for showing source file
versions.
Specifically, it does the following:
* Rename ASTERISK_FILE_VERSION macro to ASTERISK_REGISTER_FILE, and
remove passing the version in with the macro. Other facilities
than 'core show file version' make use of the file names, such as
setting a debug level only on a specific file. As such, the act of
registering source files with the Asterisk core still has use. The
macro rename now reflects the new macro purpose.
* main/asterisk:
- Refactor the file_version structure to reflect that it no longer
tracks a version field.
- Remove the "core show file version" CLI command. Without the file
version, it is no longer useful.
- Remove the ast_file_version_find function. The file version is no
longer tracked.
- Rename ast_register_file_version/ast_unregister_file_version to
ast_register_file/ast_unregister_file, respectively.
* main/manager: Remove value from the Version key of the ModuleCheck
Action. The actual key itself has not been removed, as doing so would
absolutely constitute a backwards incompatible change. However, since
the file version is no longer tracked, there is no need to attempt to
include it in the Version key.
* UPGRADE: Add notes for:
- Modification to the ModuleCheck AMI Action
- Removal of the "core show file version" CLI command
Change-Id: I6cf0ff280e1668bf4957dc21f32a5ff43444a40e
Add the .gitignore and .gitreview files to the asterisk repo.
NB: You can add local ignores to the .git/info/exclude file
without having to do a commit.
Common ignore patterns are in the top-level .gitignore file.
Subdirectory-specific ignore patterns are in their own .gitignore
files.
Change-Id: I842a1588ff27d8a0189f12d597f0a7af033d6c69
Tested-by: George Joseph
With this patch, chan_pjsip/res_pjsip now sets the native formats to the
codecs negotiated by a call.
* The changes in chan_pjsip.c and res_pjsip_sdp_rtp.c set the native
formats to include all the negotiated audio codecs instead of only the
initial preferred audio codec and later the currently received audio
codec.
* The audio frame handling in channel.c:ast_read() is more streamlined and
will automatically adjust to changes in received frame formats. The new
policy is to remove translation and pass the new frame format to the
receiver except if the translation was to a signed linear format. A more
long winded version is commented in ast_read() along with some caveats.
* The audio frame handling in channel.c:ast_write() is more streamlined
and will automatically adjust any needed translation to changes in the
frame formats sent. Frame formats sent can change for many reasons such
as a recording is being played back or the bridged peer changed the format
it sends. Since it is a normal expectation that sent formats can change,
the codec mismatch warning message is demoted to a debug message.
* Removed the short circuit check in
channel.c:ast_channel_make_compatible_helper(). Two party bridges need to
make channels compatible with each other. However, transfers and moving
channels among bridges can result in otherwise compatible channels having
sub-optimal translation paths if the make compatible check is short
circuited. A result of forcing the reevaluation of channel compatibility
is that the asterisk.conf:transcode_via_slin and codecs.conf:genericplc
options take effect consistently now. It is unfortunate that these two
options are enabled by default and negate some of the benefits to the
changes in channel.c:ast_read() by forcing translation through signed
linear on a two party bridge.
* Improved the softmix bridge technology to better control the translation
of frames to the bridge. All of the incoming translation is now normally
handled by ast_read() instead of splitting any translation steps between
ast_read() and the slin factory. If any frame comes in with an unexpected
format then the translation path in ast_read() is updated for the next
frame and the slin factory handles the current frame translation.
This is the final patch in a series of patches aimed at improving
translation path choices. The other patches are on the following reviews:
https://reviewboard.asterisk.org/r/4600/https://reviewboard.asterisk.org/r/4605/
ASTERISK-24841 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/4609/
........
Merged revisions 434671 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434672 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Richard Mudgett
George Joseph
Joshua Colp
Mark Michelson
Kevin Harwell
Matt Jordan
Diederik de Groot
Corey Farrell
Rodrigo Ramírez Norambuena
pchero
Alexander Traud
Jonathan Rose
Walter Doekes
Jonh Wendell
Ivan Poddubny
Elazar Broad
Scott Griepentrog
Guido Falsi
David M. Lee
Scott Emidy
Benjamin Ford
Ashley Sanders
ibercom
Joerg Sonnenberger
Yousf Ateya
Corey Edwards
snuffy
Maciej Szmigiero
Rodrigo Ramírez Norambuena
D Tucny
Steve Davies
Gareth Palmer