asterisk

Commit Graph

Author	SHA1	Message	Date
George Joseph	e8cace12ba	pjproject_bundled: Add 3 upstream patches 0035-r5572-svn-backport-dialog-transaction-deadlock.patch 0036-r5573-svn-backport-ua-pjsua-transaction-deadlock.patch 0037-r5576-svn-backport-session-timer-crash.patch Also removed the progress bar from wget download to stdout. ASTERISK-26905 #close Reported-by: Ross Beer Change-Id: I268fb3cf71a3bb24283ff0d24bd8b03239d81256	8 years ago
Walter Doekes	e6087296c3	build: Fix deb build issues with fakeroot If DESTDIR is set, don't call ldconfig. Assume that DESTDIR is used to create a binary archive. The ldconfig call should be delegated to the archive postinst script. This fixes the case where fakeroot wraps 'make install' causing $EUID to be 0 even though it doesn't have permission to call ldconfig. The previous logic in configure.ac to detect and correct libdir has been removed as it was not completely accurate. CentOS 64-bit users should again specifiy --libdir=/usr/lib64 when configuring to prevent install to /usr/lib. Updated Makefile:check-old-libdir to check for orphans in lib64 when installing to lib as well as orphans in lib when installing to lib64. Updated Makefile and main/Makefile uninstall targets to remove the orphans using the new logic. ASTERISK-26705 Change-Id: I51739d4a03e60bff38be719b8d2ead0007afdd51	8 years ago
Sean Bright	b033b74118	core: Remove embedded module support This has not worked for some time and is no longer actively maintained. Change-Id: I5110b0db69c152761b58fa025cb0a53b0e544d99	8 years ago
Matt Jordan	dfa689cf94	configure: Don't use the progress bar with curl when downloading to stdout In some scenarios, such as when there may not be a terminal (such as inside a Docker container), curl will apparently direct the progress bar to stdout. This can cause extra data to be appended to a file curl'd down to stdout, resulting in md5 verification failures. This patch removes the progress bar, and tells curl to download the file silently. ASTERISK-26872 #close Change-Id: Ie860b020f627d4372b3e7ce9453de5faafeebe6c	8 years ago
George Joseph	152b8c54ba	build: Execute ldconfig to build cache. (take two) On some platforms a multiarch approach is used for libraries. The build system does not take this into account and still places libraries into the lib directory if no --libdir is specified to configure. On initial startup this results in libasteriskssl.so not being found, as it is not in the multiarch lib directory. To make matters worse, options were being passed to ldconfig on both Linux and FreeBSD that actually prevented the rebuild of the cache. * Fedora has a /usr/share/config.site that automatically tells autoconf to use /usr/lib64 but CentOS does not. This logic was copied to configure.ac and modified so systems like Ubuntu, which still use /usr/lib for 64-bit systems, aren't affected. Now that we have them in the correct directory... In order for the system loader to find libasteriskssl and libasteriskpj, one of 3 things has to happen... - The linker cache must be rebuilt including the directory where the libasterisk* libraries were installed. Only root can rebuild the cache. This was busted. - We have to link the asterisk binary with an rpath pointing to the directrory where the libasterisk* libraries were installed. This makes things very complicated and will happen over the collective dead bodies of everyone who's had to package a distribution with an rpath. - Finally, you can start asterisk with LD_LIBRARY_PATH set to the directrory where the libasterisk* libraries were installed. There are no other options. So... * The invokation of ldconfig has been moved from main/Makefile to ASTTOPDIR/Makefile, the options have been removed, and DESTDIR/ASTLIBDIR appended. If you aren't root, you will be warned after the "Asterisk Installation Compete" banner that you must re-run 'make install' as root, manually run 'ldconfig DESTDIR/ASTLIBDIR' as root, or run asterisk with LD_LIBRARY_PATH. ASTERISK-26705 Change-Id: I2a64b7c33a7d3e9bde20f47e3d3ab771977af982	8 years ago
Sean Bright	022dcc617e	pjproject-bundled: Fix checksum verification when using cURL ASTERISK-26802 #close Reported by: Michael L. Young Change-Id: Iad293080f55d4d69ab615717a15211d916eed613	8 years ago
George Joseph	507c50914a	res_pjsip_pubsub: Correctly implement persisted subscriptions This patch fixes 2 original issues and more that those 2 exposed. * When we send a NOTIFY, and the client either doesn't respond or responds with a non OK, pjproject only calls our pubsub_on_evsub_state callback, no others. Since pubsub_on_evsub_state (which does the sub_tree cleanup) does not expect to be called back without the other callbacks being called first, it just returns leaving the sub_tree orphaned. Now pubsub_on_evsub_state checks the event for PJSIP_EVENT_TSX_STATE which is what pjproject will set to tell us that it was the transaction that timed out or failed and not the subscription itself timing our or being terminated by the client. If is TSX_STATE, pubsub_on_evsub_state now does the proper cleanup regardless of the state of the subscription. * When a client renews a subscription, we don't update the persisted subscription with the new expires timestamp. This causes subscription_persistence_recreate to prune the subscription if/when asterisk restarts. Now, pubsub_on_rx_refresh calls subscription_persistence_update to apply the new expires timestamp. This exposed other issues however... * When creating a dialog from rdata (which sub_persistence_recreate does from the packet buffer) there must NOT be a tag on the To header (which there will be when a client refreshes a subscription). If there is one, pjsip_dlg_create_uas will fail. To address this, subscription_persistence_update now accepts a flag that indicates that the original packet buffer must not be updated. New subscribes don't set the flag and renews do. This makes sure that when the rdata is recreated on asterisk startup, it's done from the original subscribe packet which won't have the tag on To. * When creating a dialog from rdata, we were setting the dialog's remote (SUBSCRIBE) cseq to be the same as the local (NOTIFY) cseq. When the client tried to resubscribe after a restart with the correct cseq, we'd reject the request with an Invalid CSeq error. * The acts of creating a dialog and evsub by themselves when recreating a subscription does NOT restart pjproject's subscription timer. The result was that even if we did correctly recreate the subscription, we never removed it if the client happened to go away or send a non-OK response to a NOTIFY. However, there is no pjproject function exposed to just set the timer on an evsub that wasn't created by an incoming subscribe request. To address this, we create our own timer using ast_sip_schedule_task. This timer is used only for re-establishing subscriptions after a restart. An earlier approach was to add support for setting pjproject's timer (via a pjproject patch) and while that patch is still included here, we don't use that call at the moment. While addressing these issues, additional debugging was added and some existing messages made more useful. A few formatting changes were also made to 'pjsip show scheduled tasks' to make displaying the subscription timers a little more friendly. ASTERISK-26696 ASTERISK-26756 Change-Id: I8c605fc1e3923f466a74db087d5ab6f90abce68e	8 years ago
David M. Lee	4fee903d93	configure: fix with-pjproject-bundled The AC_ARG_WITH macro's shell variable is withval; not enableval. Purely coincidentally, the option would work when --enable-dev-mode is given. Also fixed a portability problem with bootstrap.sh, since -printf is not a portable option for find. Change-Id: I0f0e5b1a934b5af5737713834361e9c95b96b376	9 years ago
Tzafrir Cohen	0169b09bee	autoconf: more variants for OSARCH linux-gnu There are quite a few odd GNU/Linux platforms. Just call all of them linux-gnu. Specifically this fixes building the Debian platforms mips64el and x32. And maybe also others. ASTERISK-26546 #close Change-Id: I06ec4bd7f0ee1c84b6b24d81538223b07c4174b1	9 years ago
George Joseph	6d34d0ab36	pjproject_bundled: Improve reliability of pjproject download The download process now has a timeout which will cause wget to retry if it stops retrieving data for 5 seconds and fetch and curl to timeout if the whole retrieval take smore than 30 seconds. If the tarball retrieval works, the MD5SUM file is retrieved from the downloads site and the md5 checksum is verified. If either the tarball retrieval or MD5SUM retrieval fails, or the checksums don't match, the entire process is retried once. If it fails again, any incomplete tarball is deleted. .DELETE_ON_ERROR: was also added to the Makefile. Not only does this delete the tarball on failure, it till also delete corrupted library files from the pjproject source directory should they fail to build correctly. Tested all the way back to FreeBSD 9, CentOS 6, Debian 6 and Ubuntu 14. Change-Id: Iea7d33b96a31622ab1b6e54baebaf271959514e1	9 years ago
zuul	38d023c628	Merge "res_pjsip_outbound_authenticator_digest.c: Fix memory pool leak." into 14	9 years ago
Richard Mudgett	fb05acbb32	res_pjsip_outbound_authenticator_digest.c: Fix memory pool leak. Responding to authentication challenges leaks PJSIP memory pools. The leak was introduced with a pjproject 2.5.5 API change. https://trac.pjsip.org/repos/ticket/1929 changed the API usage of pjsip_auth_clt_init() to require the new API pjsip_auth_clt_deinit() to clean up cached authentication allocations that get allocated with pjsip_auth_clt_reinit_req(). ASTERISK-26516 #close Change-Id: I4473141b8c3961d0dc91c382beb3876b3efb45c8	9 years ago
George Joseph	e2046bfaf3	cli: Fix ast_el_read_char to work with libedit >= 3.1 Libedit 3.1 is not build with unicode on as a default and so the prototype for the el_gets callback changed from expecting a char buffer to accepting a wchar buffer. If ast_el_read_char isn't changed, the cli reads garbage from teh terminal. Added a configure test for (el_rfunc_t)(EditLine , wchar_t *) and updated ast_el_read_char to use the HAVE_ define to detemrine whether to use char or wchar. ASTERISK-26592 #close Change-Id: I9099b46f68e06d0202ff80e53022a2b68b08871a	9 years ago
George Joseph	dbcb958254	build: Fix default values for some SANITIZER options 2 of the sanitizers didn't have default values so in systems that don't support sanitizers menuselect would spit out warnings. They were harmless but confusing. They've now been set to "0". Change-Id: I08dc495e3b83f1feac3160b421f538c375fc5d58	9 years ago
Corey Farrell	11bc810c86	Fix issues with bundled pjproject cached download. Previously when testing I had a preexisting makeopts in ASTTOPDIR. The ordering of configure.ac causes --with-externals-cache to be processed after third-party configure. In cases where the Asterisk clone is cleaned it would cause pjproject to be downloaded to /tmp. This moves processing of the externals cache and sounds cache to happen before third-party configure. This also addresses a possible issue with the third-party Makefile. If TMPDIR is set by the environment it would override the path given to --with-externals-cache. ASTERISK-26416 Change-Id: Ifab7f35bfcd5a31a31a3a4353cc26a68c8c6592d	9 years ago
George Joseph	a0d02f3832	bundled_pjproject: Add tests for programs used by the Makefile, et al. Added tests for bzip2, tar, patch, sed and nm to configure.ac. Set DOWNLOAD_TO_STDOUT to a working command line regardless of whether the download program is wget, curl or fetch. Added a 'configure.m4' file to the third-party directory which takes care of calling any third-party project setup. Had to move some pjproject_bundled stuff up in configure.ac so it was called before the third-party configure macro. The pjproject tarball is now downloaded to the externals_cache_dir if it was specified on the ./configure command line Removed regeneration of the pjproject aconfigure file. It was only needed for an old patch that no longer applies. Converted the tests for symbols to explicit tests since we know that they're now available in the bundled version. Saves a little time during configure. ASTERISK-26416 #close Reported-by: Corey Farrell Change-Id: Id1d94251c0155f8dd41b7de7067f35cfbaafbb9b (cherry picked from commit `e6b0053d75`)	9 years ago
Kevin Harwell	65d0cbea1b	Remove "format_ogg_opus: New format" This reverts commit `40aa28131b`. ASTERISK-26426 #close Change-Id: I81e55c3c512f1dd6f49896f0c6b97a07d74fd8f5	9 years ago
George Joseph	b4642fd6a6	format_ogg_opus: New format Add Ogg/Opus playback support. This uses libopusfile in order to be able to read .opus files and play them back. Writing/recording support is not present at this time. ASTERISK-26409 Change-Id: I8815d23345108d8ca7c0bd640f6a1ce6b4f56955	9 years ago
Tzafrir Cohen	29e096cd13	sd_notify (systemd status notifications) support sd_notify() is used to notify systemd of changes to the status of the process. This allows the systemd daemon to know when the process finished loading (and thus only start another program after Asterisk has finished loading). To use this, use a systemd unit with 'Type=notify' for Asterisk. This commit also adds the function ast_sd_notify(), a wrapper around sd_notify that does nothing if not built with systemd support. Also adds support for libsystemd detection in the configure script. Change-Id: Ied6a59dafd5ef331c5c7ae8f3ccd2dfc94be7811 (cherry picked from commit `07b95f7c65`)	9 years ago
zuul	ebae949815	Merge "res_pjsip_session: segfault on already disconnected session" into 14	9 years ago
George Joseph	8b6f9dde14	build: Add download capability for external packages The DPMA and g729a, silk, siren7 and siren14 codecs hosted at http://downloads.digium.com/pub/telephony/ are now listed in the "External" sections of the "Resource Modules" and "Codec Translators" pages in menuselect. Any that are selected will automatically be downloaded and installed when "make install" is run. Their LICENSE and README (if avaialble) files will be installed to ASTVARLIBDIR/documentation/thirdparty/<product_name>. Example use with codecs: The codecs/codecs.xml file is a menuselect style xml file that lists the codecs to be included. Their support levels are 'external', which triggers the download and install, and defaultenabled is no. Also because codec_g729a is actually in a directory named codec_g729 on the download server, the newly added 'member_data' element is used to override the default of the directory name being the package name. You can use the 'directory_name' attribute to keep default base URL (http://downloads.digium.com/pub/telephony/) but use the new directory, or you use the 'remote_url' attribute to specify a full URL to the download directory. In this case, you must still follow the same subdirectory naming conventions as that used for the packages located at 'http://downloads.digium.com/pub/telephony'. A new configure option '--with-externals-cache' was added and like '--with-sounds-cache' it allows the installer to cache tarballs so they're not downloaded every time. To assist with the download and install process, each external package now has a manifest.xml file that, among other things, contains a package version and checksums for each file in the tarball. The manifest is saved to both the cache directory and ASTMODDIR and together with the manifest.xml on the downloads site, tells the install scripts whether a download and/or update is needed. bash and xmlstarlet are required for downloader operation. If they're not installed, the external items in menuselect will be unavailable. Change-Id: Id3dcf1289ffd3cb0bbd7dfab3cafbb87be60323a	9 years ago
Alexei Gradinari	09e9dca0c5	res_pjsip_session: segfault on already disconnected session On heavy loaded system the TCP/TLS incoming calls could be disconnected by pjproject while these calls are being processed by asterisk which could use the session's memory pools. If the session in the disconnected state then the session memory pools were already freed, so we get segfault. This patch adds a lifetime control on an INVITE session to pjproject. The lifetime of the session is manipulated by calling pjsip_inv_add_ref/pjsip_inv_dec_ref. This patch uses these functions to inform pjproject that the session is in use. This patch adds check if the session state is not disconnected and also checks if the memory pool is not NULL. This patch also places tasks 'session_end' and 'session_end_completion' into session's serializer to avoid race condition. ASTERISK-26291 #close Change-Id: I4d28b1fb3b91f0492a911d110049d670fdc3c8d7	9 years ago
Alexander Traud	41e9bf60aa	BuildSystem: Detect ca_list_path capabilities in external PJProject. Since Asterisk 13.8, pj_ssl_cert_load_from_files2 got detected only in the bundled PJProject but not in an external PJProject. Therefore, ca_list_path could not be used in pjsip.conf. With this change, pj_ssl_cert_load_from_files2 is detected again to enable ca_list_path again. ASTERISK-26303 #close Change-Id: I4a4a0cdc5cdff33730911fb4cfc0498c069043d0	9 years ago
George Joseph	a8512f9afe	res_resolver_unbound: Allow compilation with libunbound version < 1.5 libunbound at version 1.4.20 (which CentOS still uses) declared all of their string function parameters as as 'char '. 1.4.21 changed them all to 'const char '. Thankfully 1.4.21 also introduced the UNBOUND_VERSION_MAJOR define so configure now checks for that and sets HAVE_UNBOUND_CONST_PARAMS. res_resolver_unbound then checks that and casts away the 'const' if it's not set. Tested compile and testsuite on CentOS6 (1.4.20), Ubuntu14 (1.4.22) and Fedora24 (1.5.4). There are a few failing tests to be addressed though. ASTERISK-26283 #close Change-Id: Ib708b19b706c5d0ba7b7d5473e6df339d9ae4148	9 years ago
Joshua Colp	804c3e6b9e	Merge "res_srtp: Enable AES-256 and AES-GCM." into 14	9 years ago
Alexander Traud	2103ad1fec	res_srtp: Enable AES-256 and AES-GCM. ASTERISK-26190 #close Change-Id: I11326d80edd656524a51a19450e586c583aa0a0b	9 years ago
Corey Farrell	05cfe1a76e	Add conditional support for noreturn functions. This adds support for tagging functions with the noreturn attribute. If DO_CRASH is enabled then ast_do_crash never returns. If AST_DEVMODE and DO_CRASH are enabled then failed assertions never return. This can resolve a large number of false positives with static analyzers. ASTERISK-26220 #close Change-Id: Icfb61e5fe54574eced4c3e88b317244f467ec753	9 years ago
zuul	bea3e9b6fb	Merge "BuildSystem: Avoid obsolete warning with pthread.m4 on autoconf."	9 years ago
Alexander Traud	85212f2799	res_rtp_asterisk: Enable Forward Secrecy (PFS) for DTLS. Since July 2014, TLS based protocols (SIP over TLS, Secure WebSockets, HTTPS) support PFS thanks to ASTERISK-23905. In July 2015, the same feature was added for DTLS. The source code from main/tcptls.c should have been re-used to ease security audits. Therefore, this change rolls back the change from July 2015 and re-uses the code from July 2014. This has the additional benefits to work under CentOS 7 and enabling not just ECDHE but DHE based cipher suites as well. ASTERISK-25659 #close Reported by: StefanEng86, urbaniak, pay123 Tested by: sarumjanuch, traud patches: res_rtp_asterisk.patch submitted by sarumjanuch dtls_centos_step_1.patch submitted by traud dtls_centos_step_2.patch submitted by traud Change-Id: I537cadf4421f092a613146b230f2c0ee1be28d5c	9 years ago
Alexander Traud	a3f4141f6f	BuildSystem: Avoid obsolete warning with pthread.m4 on autoconf. Updated the macro-set autoconf/ax_pthread.m4 to its latest upstream version. ASTERISK-26046 #close Change-Id: I11abc11d17acd2b6a8a5a5be8ae8e0949dab9cc7	9 years ago
Alexander Traud	110b01a0bc	BuildSystem: Allow own CFLAGS on ./configure. Before this change, make failed with the error Unknown value '' found in build_tools/menuselect-deps for NATIVE_ARCH when CFLAGS were supplied to the configure script. This was introduced with <https://reviewboard.asterisk.org/r/1852/> which disabled BUILD_NATIVE when CFLAGS were supplied. Those who need different -march= values, please, go for ./configure make menuselect.makeopts or make menuselect ./menuselect/menuselect --disable BUILD_NATIVE ASTERISK-25289 #close Change-Id: Ic6365d5a97bb9b3556858f06432a8d1cfa83eebc	9 years ago
George Joseph	5ad7e1c09a	configure: Fix HAVE_PJSIP_EVSUB_GRP_LOCK not set with external pjproject There was a typo in configure.ac preventing HAVE_PJSIP_EVSUB_GRP_LOCK from getting set when using an external pjproject. ASTERISK-26099 #close Reported-by: Ross Beer Change-Id: I709af70428e125fb5ccd44b171d25dd29141f0ae	9 years ago
zuul	6aaba96aca	Merge "BuildSystem: Avoid obsolete warning with AC_TYPE_SIGNAL on autoconf."	9 years ago
Alexander Traud	6e87bf746a	BuildSystem: Avoid obsolete warning with AC_TYPE_SIGNAL on autoconf. Removed the obsolete macro AC_TYPE_SIGNAL because Asterisk does not use K&R C but requires ANSI C anyway. ASTERISK-26046 Change-Id: I914c014385e1862102d90fe7650621def78db02e	9 years ago
zuul	0da2e6525b	Merge "BuildSystem: Avoid obsolete warning with AC_FUNC_SETVBUF_REVERSED on autoconf."	9 years ago
Alexander Traud	5f23aacda4	BuildSystem: Avoid obsolete warning with AC_FUNC_SETVBUF_REVERSED on autoconf. Removed the obsolete macro AC_FUNC_SETVBUF_REVERSED because Asterisk does not support the platform SVR2 from the year 1987 anymore. ASTERISK-26046 Change-Id: I28161b037feb2d29ab46ed20e785928460226c22	9 years ago
George Joseph	b57cd01404	res_pjsip_pubsub: Address SEGV when attempting to terminate a subscription Occasionally under load we'll attempt to send a final NOTIFY on a subscription that's already been terminated and a SEGV will occur down in pjproject's evsub_destroy function. This is a result of a race condition between all the paths that can generate a notify and/or destroy the underlying pjproject evsub object: * The client can send a SUBSCRIBE with Expires: 0. * The client can send a SUBSCRIBE/refresh. * The subscription timer can expire. * An extension state can change. * An MWI event can be generated. * The pjproject transaction timer (timer_b) can expire. Normally when our pubsub_on_evsub_state is called with a terminate, we push a task to the serializer and return at which point the dialog is unlocked. This is usually not a problem because the task runs immediately and locks the dialog again. When the system is heavily loaded though, there may be a delay between the unlock and relock during which another event may occur such as the subscription timer or timer_b expiring, an extension state change, etc. These may also cause a terminate to be processed and if so, we could cause pjproject to try to destroy the evsub structure twice. There's no way for us to tell that the evsub was already destroyed and the evsub's group lock can't tolerate this and SEGVs. The remedy is twofold. * A patch has been submitted to Teluu and added to the bundled pjproject which adds add/decrement operations on evsub's group lock. * In res_pjsip_pubsub: * configure.ac and pjproject-bundled's configure.m4 were updated to check for the new evsub group lock APIs. * We now add a reference to the evsub group lock when we create the subscription and remove the reference when we clean up the subscription. This prevents evsub from being destroyed before we're done with it. * A state has been added to the subscription tree structure so termination progress can be tracked through the asyncronous tasks. * The pubsub_on_evsub_state callback has been split so it's not doing double duty. It now only handles the final cleanup of the subscription tree. pubsub_on_rx_refresh now handles both client refreshes and client terminates. It was always being called for both anyway. * The serialized_on_server_timeout task was removed since serialized_pubsub_on_rx_refresh was almost identical. * Missing state checks and ao2_cleanups were added. * Some debug levels were adjusted to make seeing only off-nominal things at level 1 and nominal or progress things at level 2+. ASTERISK-26099 #close Reported-by: Ross Beer. Change-Id: I779d11802cf672a51392e62a74a1216596075ba1	9 years ago
Alexander Traud	9e222efbf2	BuildSystem: Avoid obsolete warning with HELP_STRING on autoconf. Some configure scripts used both AC_HELP_STRING and its replacement AS_HELP_STRING. For consistency and to avoid obsolete warnings, those were changed to AS_HELP_STRING. ASTERISK-26046 Change-Id: I8aad4fd2bdee40aa2a31ce3339a1eb33ff4f5b0f	9 years ago
Timo Teräs	72d190eb69	Detect and use proper libraries for musl toolchains Change-Id: I8d9b212f70813404b82918a3f99439e500d4bfcb	9 years ago
Matt Jordan	5236ffed97	configure: Fix errors with AST_UNDEFINED_SANITIZER/AST_LEAK_SANITIZER When running on a system that does not support or use AST_UNDEFINED_SANITIZER or AST_LEAK_SANITIZER, the configure script would incorrectly set those constants to a blank value, e.g., 'AST_UNDEFINED_SANITIZER='. This would cause menuselect to error out, complaining that a blank value is not a valid option. This patch corrects the issue by setting the value to 0 if the options that those constants enable/disable is not found. Change-Id: Ib39814aaf940f308d500c1e026edb3d70de47fba	9 years ago
George Joseph	facce6f632	pjproject_bundled: Check for python-dev and TEST_FRAMEWORK The pjsua and pjsystest apps are now built only if TEST_FRAMEWORK is set. The python bindings are now built only if TEST_FRAMEWORK is set and a python development package is installed. libresample was also disabled. ASTERISK-25993 #close Reported-by: Joshua Colp Change-Id: If4e91c503a02f113d5b71bc8b972081fa3ff6f03	9 years ago
George Joseph	392341ba37	pjproject-bundled: Cleanups for reported issues PortAudio should no longer be required PJSIP_MAX_PKT_LEN is now 6000 Older autoconf issue fixed. (CentOS 6) Change-Id: I463fa9586cbe7c6b3b603289f535bd8e361611dd	9 years ago
Joshua Colp	4df7b3ae80	build: Add configure check for proto field of PJSIP TLS transport setting. Older versions of PJSIP do not have the proto field on the TLS transport setting structure. This change adds a configure check so even if it is not present we will still be able to build. Change-Id: Ibf3f47befb91ed1b8194bf63888baa6fee05aba9	9 years ago
George Joseph	3173e91bab	build-system: Allow building with static pjproject Background here: http://lists.digium.com/pipermail/asterisk-dev/2016-January/075266.html From CHANGES: * To help insure that Asterisk is compiled and run with the same known version of pjproject, a new option (--with-pjproject-bundled) has been added to ./configure. When specified, the version of pjproject specified in third-party/versions.mak will be downloaded and configured. When you make Asterisk, the build process will also automatically build pjproject and Asterisk will be statically linked to it. Once a particular version of pjproject is configured and built, it won't be configured or built again unless you run a 'make distclean'. To facilitate testing, when 'make install' is run, the pjsua and pjsystest utilities and the pjproject python bindings will be installed in ASTDATADIR/third-party/pjproject. The default behavior remains building with the shared pjproject installation, if any. Building: All you have to do is include the --with-pjproject-bundled option on the ./configure command line (and remove any existing --with-pjproject option if specified). Everything else is automatic. Behind the scenes: The top-level Makefile was modified to include 'third-party' in the list of MOD_SUBDIRS. The third-party directory was created to contain any third party packages that may be needed in the future. Its Makefile automatically iterates over any subdirectories passing on targets. The third-party/pjproject directory was created to house the pjproject source distribution. Its Makefile contains targets to download, patch configure, generate dependencies, compile libs, apps and python bindings, sanitized build.mak and generate a symbols list. When bootstrap.sh is run, it automatically includes the configure.m4 file in third-party/pjproject. This file has a macro to download and conifgure pjproject and get and set PJPROJECT_INCLUDE, PJPROJECT_DIR and PJPROJECT_BUNDLED. It also tests for the capabilities like PJ_TRANSACTION_GRP_LOCK by parsing preprocessor output as opposed to trying to compile. Of course, bootstrap.sh is only run once and the configure file is incldued in the patch. When configure is run with the new options, the macro in configure.m4 triggers the download, patch, conifgure and tests. No compilation is performed at this time. The downloaded tarball is cached in /tmp so it doesn't get downloaded again on a distclean. When make is run in the top-level Asterisk source directory, it will automatically descend all the subdirectories in third_party just as it does for addons, apps, etc. The top-level Makefile makes sure that the 'third-party' is built before 'main' so that dependencies from the other directories are built first. When main does build, a new shared library (libasteriskpj) is created that links statically to the pjproject .a files and exports all their symbols. The asterisk binary links to that, just as it does with libasteriskssl. When Asterisk is installed, the pjsua and pjsystest apps, and the pjproject python bindings are installed in ASTDATADIR/third-party/pjproject. This will facilitate testing, including running the testsuite which will be updated to check that directory for the pjsua module ahead of the system python library. Modules should continue to depend on pjproject if they use pjproject APIs directly. They should not care about the implementation. No changes to any res_pjsip modules were made. Change-Id: Ia7a60c28c2e9ba9537c5570f933c1ebcb20a3103	9 years ago
George Joseph	168c18737f	res_pjsip: Handle pjsip_dlg_create_uas deprecation Pjproject has deprecated pjsip_dlg_create_uas in 2.5 and replaced it with pjsip_dlg_create_uas_and_inc_lock which, as the name implies, automatically increments the lock on the returned dialog. To account for this, configure.ac now detects the presence of pjsip_dlg_create_uas_and_inc_lock and res_pjsip.c has an #ifdef HAVE_PJSIP_DLG_CREATE_UAS_AND_INC_LOCK to decide whether to use the original call or the new one. If the new one was used, the ref count is decremented before returning. ASTERISK-25751 #close Reported-by Josh Colp Change-Id: I1be776b94761df03bd0693bc7795a75682615ca8	9 years ago
Badalyan Vyacheslav	a23d01e943	Build: Added testing compiler to support the system sanitizes In older versions of the compiler was not sanitizes. Compilers other than GCC can not support the Usan and TSAN or have other options for *FLAGS. ASTERISK-25767 #close Reported by: Badalyan Vyacheslav Tested by: Badalyan Vyacheslav Change-Id: Iefce6608221fa87884b82ae3cb5649b7b1804916	9 years ago
Mark Michelson	3b426a8b09	Check for OpenSSL defines before trying to use them. The SSL_OP_NO_TLSv1_1 and SSL_OP_NO_TLSv1_2 defines did not exist prior to OpenSSL version 1.0.1. A recent commit attempts to, by default, set these options, which can cause problems on systems with older OpenSSL installations. This commit adds a configure script check for those defines and will not attempt to make use of those if they do not exist. We will print a warning urging the user to upgrade their OpenSSL installation if those defines are not present. Change-Id: I6a2eb9a43fd0738b404d8f6f2cf4b5c22d9d752d	9 years ago
Corey Farrell	5dde111719	Build System: Add support for checking alembic branches. * Add 'check-alembic' target to root Makefile. * Create build_tools/make_check_alembic to do the actual checks. ASTERISK-25685 Change-Id: Ibb3cae7d1202ac23dc70b0f3b5801571ad46b004	9 years ago
Alexander Traud	270f7be54f	Build System: Support include-what-you-use. ASTERISK-25591 #close Change-Id: I8d3efa0826142ece9cbed2fd0d46f3b607fee6ae	10 years ago
Richard Mudgett	ca030845ff	configure: Fix check for libunbound to require v1.5.0 as minimum. Versions of libunbound before v1.4.21 do not compile with Asterisk. However, since v1.4.21 has a configure script bug that fails to detect the ldns library (which is fixed in v1.4.22) and v1.4.22 is not an easily detectable version we will require v1.5.0 as a minimum version of the library to work with Asterisk. ASTERISK-25108 #close Reported by: Richard Mudgett Change-Id: Ieb228bfb01467573fc121c7356a9dde27128894d	10 years ago

1 2 3 4 5 ...

536 Commits (3408561eb7601da9dd38c3d89722a515d210c4fe)