https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r111341 | murf | 2008-03-26 21:21:05 -0600 (Wed, 26 Mar 2008) | 15 lines
(closes issue #12302)
Reported by: pj
Tested by: murf
These changes will set a channel variable ~~EXTEN~~ just before generating code
for a switch, with the value of ${EXTEN}. The exten is marked as having a switch,
and ever after that, till the end of the exten, we substitute any ${EXTEN}
with ${~~EXTEN~~} instead in application arguments; (and the ${EXTEN: also).
The reason for this, is that because switches are coded using
separate extensions to provide pattern matching, and
jumping to/from these switch extensions messes up the ${EXTEN} value,
which blows the minds of users.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@111360 65c4cc65-6c06-0410-ace0-fbb531ad65f3
G.722 music on hold working for me.
(issue #12164, reported by milazzo and jsmith, patches by me)
res/res_musiconhold.c:
- I moved a single line so that the sample queue update happened before
ast_write(). The reason that this was a bug is that the G.722 frame
originally says it has 320 samples in it (which is correct). However,
when the frame is written to a channel that uses RTP, main/rtp.c modifies
the frame to cut the number of samples in half before it sends it on
the wire. This is to account for the stupid incorrect G.722 spec that
makes it so we have to lie about the number of samples with RTP. I should
probably go and re-work the RTP code so it doesn't modify the frame so
that a bug like this won't happen in the future. However, this change to
MOH is harmless.
main/channel.c:
- I made two fixes in regards to generator timing. Generators use samples
for timing. However, this code assumed 8 kHz samples. In one case, it was
a hard coded 160 samples, that is now written as the sample rate / 50. The
other place was dealing with timing a generator based on frames coming from
the other direction. However, that would have only worked if the sample
rates for the formats in both directions were the same. The code now takes
into account that the sample rates may differ, and scales the generator
samples accordingly.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@110268 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r110035 | file | 2008-03-19 16:11:33 -0300 (Wed, 19 Mar 2008) | 4 lines
Add sanity checking for position resuming. We *have* to make sure that the position does not exceed the total number of files present, and we have to make sure that the position's filename is the same as previous. These values can change if a music class is reloaded and give unpredictable behavior.
(closes issue #11663)
Reported by: junky
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@110036 65c4cc65-6c06-0410-ace0-fbb531ad65f3
actual problems, per se. I also added format attributes to any printf wrapper functions I found that didn't have them. -Wsecurity and -Wmissing-format-attribute added to --enable-dev-mode.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@109447 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r109309 | murf | 2008-03-18 00:37:15 -0600 (Tue, 18 Mar 2008) | 17 lines
(closes issue #11903)
Reported by: atis
Many thanks to atis for spotting this problem and reporting it.
The fix was to straighten out how items are placed on and removed
from the file stack. Regressions as well as the provided test case
helped to straighten out all code paths. valgrind was used to make
sure all memory allocated was freed.
Sorry for not solving this earlier. I got distracted.
Added the ntest23 regression test, which is mainly a copy of ntest22,
but with a few juicy errors thrown in, to replicate the kind of
error that atis spotted.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@109357 65c4cc65-6c06-0410-ace0-fbb531ad65f3
caching would not work properly for users.conf and any other file read from
more than one place. I needed to add the filename which requested the config
file to get it to work properly.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@107791 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r107352 | kpfleming | 2008-03-11 06:04:29 -0500 (Tue, 11 Mar 2008) | 11 lines
fix up various compiler warnings found with gcc-4.3:
- the output of flex includes a static function called 'input' that is not used, so for the moment we'll stop having the compiler tell us about unused variables in the flex source files (a better fix would be to improve our flex post-processing to remove the unused function)
- main/stdtime/localtime.c makes assumptions about signed integer overflow, and gcc-4.3's improved optimizer tries to take advantage of handling potential overflow conditions at compile time; for now, suppress these optimizations until we can fiure out if the code needs improvement
- main/udptl.c has some references to uninitialized variables; in one case there was no bug, but in the other it was certainly possibly for unexpected behavior to occur
- main/editline/readline.c had an unused variable
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@107373 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: rizzo
Tested by: murf
Proposal of the changes to be made, and then an announcement of how they were accomplished:
http://lists.digium.com/pipermail/asterisk-dev/2008-February/032065.html
and:
http://lists.digium.com/pipermail/asterisk-dev/2008-March/032124.html
Here is a recap, file by file, of what I have done:
pbx/pbx_config.c
pbx/pbx_ael.c
All funcs that were passed a ptr to the context list, now will ALSO be passed a hashtab ptr to the same set.
Why? because (for the time being), the dialplan is stored in both, to facilitate a quick, low-cost move to
hash-tables to speed up dialplan processing. If it was deemed necessary to pass the context LIST, well, it
is just as necessary to have the TABLE available. This is because the list/table in question might not be
the global one, but temporary ones we would use to stage the dialplan on, and then swap into the global
position when things are ready.
We now have one external function for apps to use, "ast_context_find_or_create()" instead of the pre-existing
"find" and "create", as all existing usages used both in tandem anyway.
pbx_config, and pbx_ael, will stage the reloaded dialplan into local lists and tables, and
then call merge_contexts_and_delete, which will merge (now) existing contexts and
priorities from other registrars into this local set by copying them. Then, merge_contexts_and_delete will
lock down the contexts, swap the lists and tables, and unlock (real quick), and then
destroy the old dialplan.
chan_sip.c
chan_iax.c
chan_skinny.c
All the channel drivers that would add regcontexts now use the ast_context_find_or_create now.
chan_sip also includes a small fix to get rid of warnings about removing priorities that never got entered.
apps/app_meetme.c
apps/app_dial.c
apps/app_queue.c
All the apps that added a context/exten/priority were also modified to use ast_context_find_or_create instead.
include/asterisk/pbx.h
ast_context_create() is removed. Find_or_create_ is the new method.
ast_context_find_or_create() interface gets the hashtab added.
ast_merge_contexts_and_delete() gets the local hashtab arg added.
ast_wrlock_contexts_version() is added so you can detect if someone else got a writelock between your readlocking and writelocking.
ast_hashtab_compare_contexts was made public for use in pbx_config/pbx_ael
ast_hashtab_hash_contexts was in like fashion make public.
include/asterisk/pval.h
ast_compile_ael2() interface changed to include the local hashtab table ptr.
main/features.c
For the sake of the parking context, we use ast_context_find_or_create().
main/pbx.c
I changed all the "tree" names to "table" instead. That's because the original
implementation was based on binary trees. (had a free library). Then I moved
to hashtabs. Now, the names move forward too.
refcount field added to contexts, so you can keep track of how many modules
wanted this context to exist.
Some log messages that are warnings were inflated from LOG_NOTICE to LOG_WARNING.
Added some calls to ast_verb(3,...) for debug messages
Lots of little mods to ast_context_remove_extension2, which is now excersized in ways
it was not previously; one definite bug fixed.
find_or_create was upgraded to handle both local lists/tables as well as the globals.
context_merge() was added to do the per-context merging of the old/present contexts/extens/prios into the new/proposed local list/tables
ast_merge_contexts_and_delete() was heavily modified.
ast_add_extension2() was also upgraded to handle changes.
the context_destroy() code was re-engineered to handle the new way of doing things,
by exten/prio instead of by context.
res/ael/pval.c
res/ael/ael.tab.c
res/ael/ael.tab.h
res/ael/ael.y
res/ael/ael_lex.c
res/ael/ael.flex
utils/ael_main.c
utils/extconf.c
utils/conf2ael.c
utils/Makefile
Had to change the interface to ast_compile_ael2(), to include the hashtab ptr.
This ended up involving several external apps. The main gotcha was I had to
include lock.h and hashtab.h in several places.
As a side note, I tested this stuff pretty thoroughly, I replicated the problems
originally reported by Luigi, and made triply sure that reloads worked, and everything
worked thru "stop gracefully". I found a and fixed a few bugs as I was merging into
trunk, that did not appear in my tests of bug6002.
How's this for verbose commit messages?
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@106757 65c4cc65-6c06-0410-ace0-fbb531ad65f3
given our removal of deadagi as an actual application.
(closes issue #12161)
Reported by: explidous
Patches:
res_agi_12161.patch uploaded by juggie (license 24)
Tested by: juggie
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@106399 65c4cc65-6c06-0410-ace0-fbb531ad65f3
automatically generated file like it used to be. This still needs to be there
for modules that have to check it to compile against multiple asterisk versions.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@104244 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r104119 | russell | 2008-02-25 18:25:29 -0600 (Mon, 25 Feb 2008) | 33 lines
Merge changes from team/russell/smdi-1.4
This commit brings in a significant set of changes to the SMDI support in Asterisk.
There were a number of bugs in the current implementation, most notably being that
it was very likely on busy systems to pop off the wrong message from the SMDI message
queue. So, this set of changes fixes the issues discovered as well as introducing
some new ways to use the SMDI support which are required to avoid the bugs with
grabbing the wrong message off of the queue.
This code introduces a new interface to SMDI, with two dialplan functions. First,
you get an SMDI message in the dialplan using SMDI_MSG_RETRIEVE() and then you access
details in the message using the SMDI_MSG() function. A side benefit of this is that
it now supports more than just chan_zap.
For example, with this implementation, you can have some FXO lines being terminated
on a SIP gateway, but the SMDI link in Asterisk.
Another issue with the current implementation is that it is quite common that the
station ID that comes in on the SMDI link is not necessarily the same as the Asterisk
voicemail box. There are now additional directives in the smdi.conf configuration
file which let you map SMDI station IDs to Asterisk voicemail boxes.
Yet another issue with the current SMDI support was related to MWI reporting over
the SMDI link. The current code could only report a MWI change when the change
was made by someone calling into voicemail. If the change was made by some other
entity (such as with IMAP storage, or with a web interface of some kind), then the
MWI change would never be sent. The SMDI module can now poll for MWI changes if
configured to do so.
This work was inspired by and primarily done for the University of Pennsylvania.
(also related to issue #9260)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@104120 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(closes issue #8925)
About a year ago, as Leif Madsen and Jim van Meggelen were going over the CLI
commands in Asterisk 1.4 for the next version of their book, they documented
a lot of inconsistencies. This set of changes addresses all of these issues
and has been reviewed by Leif.
While this does introduce even more changes to the CLI command structure, it
makes everything consistent, which is the most important thing.
Thanks to all that helped with this one!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@103171 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r101531 | mmichelson | 2008-01-31 15:00:24 -0600 (Thu, 31 Jan 2008) | 10 lines
1. Prevent the addition of an extra '/' to the beginning of an absolute pathname.
2. If ast_monitor_change_fname is called and the new filename is the same as the old, then exit early and don't set the
filename_changed field in the monitor structure. Setting it in this case was causing ast_monitor_stop to erroneously
delete them.
(closes issue #11741)
Reported by: garlew
Tested by: putnopvut
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@101532 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r99341 | tilghman | 2008-01-21 12:11:07 -0600 (Mon, 21 Jan 2008) | 8 lines
Permit the user to specify number of seconds that a connection may remain idle,
which fixes a crash on reconnect with the MyODBC driver.
(closes issue #11798)
Reported by: Corydon76
Patches:
20080119__res_odbc__idlecheck.diff.txt uploaded by Corydon76 (license 14)
Tested by: mvanbaak
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@99350 65c4cc65-6c06-0410-ace0-fbb531ad65f3
option is incorrectly passed to the transferee when built-in
attended transfers are used. There is still a problem with 'T',
but better to fix some problems than no problems while we work
on it.
(closes issue #7904)
Reported by: k-egg
Patches:
transfer-fix-trunk-r97657.diff uploaded by sergee (license 138)
Tested by: sergee, otherwiseguy
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@99026 65c4cc65-6c06-0410-ace0-fbb531ad65f3
the HTTP request for the config came in on and the SERVER_PORT to the
bindport setting in sip.conf. I've left in the ability to override these
options, because I can't always guess how someone might decide to do something
weird with what is available to them--although needing to is pretty unlikely.
Documentation was updated to reflect preference for not setting serveraddr,
serveriface, or serverport. Tested on Linux and OS X.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@98988 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r98317 | file | 2008-01-11 15:28:30 -0400 (Fri, 11 Jan 2008) | 6 lines
If the channel is hungup during RECORD FILE send a result code of -1 to be uniform with everything else.
(closes issue #11743)
Reported by: davevg
Patches:
res_agi.diff uploaded by davevg (license 209)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@98318 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r97889 | murf | 2008-01-10 14:37:10 -0700 (Thu, 10 Jan 2008) | 1 line
Applied the same fixes for ael.flex as was done in 97849 for ast_expr2.fl; overrode the normally generate yyfree func with our own version that checks the pointer for non-null before passing to free(). Also takes care of a little problem with 2.5.33 and the use of the __STDC_VERSION__ macro.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@97890 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1) Add the Dialplan class, for NewExten and VarSet events, which should cut
down on the volume of traffic in the Call class.
2) Permit some commands to be run from multiple classes, such as allowing
DBGet to be run from either the System or the Reporting class.
3) Heavily document each class in the sample config, as there were several
that made no sense to be in the write= line, and two that made no sense to be
in the read= line (since they controlled no permissions there).
(Closes issue #10386)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@97651 65c4cc65-6c06-0410-ace0-fbb531ad65f3
based on configuration templates that use Asterisk dialplan function and
variable substitution. It should be possible to create phone profiles and
templates that work for the majority of phones provisioned over http. It
is currently only intended to provision a single user account per phone.
An example profile and set of templates for Polycom phones is provided.
NOTE: Polycom firmware is not included, but should be placed in
AST_DATA_DIR/phoneprov/configs to match up with the included templates.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@97634 65c4cc65-6c06-0410-ace0-fbb531ad65f3
revision changed, every module that used the version was getting rebuilt after
every svn update. This severly annoyed me pretty quickly, so I have improved
the situation.
Now, instead of generating version.h, main/version.c is generated. version.c
includes the version information, as well as a couple of API calls for modules
to retrieve the version. So now, only version.c will get rebuilt, and the main
asterisk binary relinked, which is must faster than rebuilding http.c, manager.c,
asterisk.c, relinking the asterisk binary, chan_sip.c, func_version.c, res_agi ...
The only minor change in behavior here is that the version information reported by
chan_sip, for example, is the version of the Asterisk core, and not necessarily the
Asterisk version that the chan_sip module came from.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@96717 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the XMPP over TLS/SSL connection resets for some reason, it is
wrongly believed as being secured, which makes the re-connection
process endlessly fail. This was reported by mvanbaak in issue #11644.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@95794 65c4cc65-6c06-0410-ace0-fbb531ad65f3
res_resample, and mark codec_resample as dependent upon res_resample. This
prevents the linker from optimizing away libresample, and also makes it so the
libresample code isn't linked in to multiple places. (I have another module
in a branch that needs it, too.)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@95697 65c4cc65-6c06-0410-ace0-fbb531ad65f3
so that paths and filename are writable by asterisk.c without
causing segfaults.
This involves defining the variables as const char *,
and having them point to as static, writable buffer
defined in asterisk.c
On passing, fix some errors in using these variables
in some files in utils/ , and in res/snmp/agent.c
which was redefining a variable without using paths.h
(not applicable to 1.4)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@94168 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r94122 | mmichelson | 2007-12-19 17:02:22 -0600 (Wed, 19 Dec 2007) | 6 lines
Sox versions 13.0.0 and newer do not have "soxmix" and instead use sox -m. res_monitor
needs to use this if the user does not have soxmix.
(closes issue #11589, reported by amessina, patch inspired by amessina but with a flourish from me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@94123 65c4cc65-6c06-0410-ace0-fbb531ad65f3
is below. I should note that the PACKAGE_* macros that asterisk
defines in autoconfig.h are not used anywhere in the tree so
they should just be removed.
/*
* There is some collision collision between netsmp and asterisk names,
* causing build under AST_DEVMODE to fail.
*
* The following PACKAGE_* macros are one place.
* Also netsnmp has an improper check for HAVE_DMALLOC_H, using
* #if HAVE_DMALLOC_H instead of #ifdef HAVE_DMALLOC_H
* As a countermeasure we define it to 0, however this will fail
* when the proper check is implemented.
*/
No
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93875 65c4cc65-6c06-0410-ace0-fbb531ad65f3
modified.
This requires casting the strings in asterisk.c when writing to
them, so we do it through a macro to do it consistently.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93603 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r93180 | kpfleming | 2007-12-16 22:44:51 -0800 (Sun, 16 Dec 2007) | 23 lines
In http://lists.digium.com/pipermail/asterisk-dev/2007-December/031145.html,
rizzo brought up some issues related to the way that the metadata required
for menuselect and the rest of the build system is extracted from the source
files. Since I had a few hours to kill on an airplane today, I decided to
improve this situation... so now the system caches the extracted metadata
and uses it to build the menuselect 'tree' as much as it can. The result
of this is that when a single source file is changed, only the metadata for
that file needs to be extracted again, and the rest is used from the cache
files. I also reduced the number of forked processes required to do the
metadata extraction; it was actually possible to do most of what we needed
in the Makefiles themselves without using any shell scripts at all! On my
laptop, these changes resulted in an 80% decrease in the time required
for the 'menuselect.makeopts' automatic check to occur after editing a single
source file.
While doing this work I also cleaned up a few minor things in the Makefiles,
adding a check for 'awk' to the configure script and changed all remaining
places we use 'grep' or 'awk' to use the ones found by the configure script,
and changed the 'prep_tarball' script to build the menuselect metadata so
that tarballs of Asterisk will include it and won't require the user to
wait while it is extracted after unpacking.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93184 65c4cc65-6c06-0410-ace0-fbb531ad65f3
generate loadable and embedded module lists.
Individual Makefiles now are a lot simpler, possibly as simple as this:
-include $(ASTTOPDIR)/menuselect.makeopts $(ASTTOPDIR)/menuselect.makedeps
MODULE_PREFIX=cdr_
all: _all
include $(ASTTOPDIR)/Makefile.moddir_rules
and also more flexible because in a single directory we can combine
various types of modules (app_, cdr_, func_, ... ) by simply
listing them in the MODULE_PREFIX variable.
The individual Makefiles can also create list of modules to be
excluded by listing them in the variablel MODULE_EXCLUDE (see an
example in channels/Makefile).
With this change it becomes trivial to integrate a directory with
locally created/modified sources into the main build.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@92082 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This works in much the same way as the automonitor, except that instead of using the monitor
app, it uses the mixmonitor app. By providing an 'x' or 'X' as a dial or queue option, a DTMF
sequence may be entered (as defined in features.conf) to start the one-touch mixmonitor.
This patch also introduces some new API calls to the audiohooks code for searching for an audiohook
by type and for searching for a running audiohook by type.
Big thanks to joetester for writing the initial patch, testing it and patiently waiting for it to
be committed.
(closes issue #10185, reported and patched by xmarksthespot)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@90388 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1. When moh is started, we search first in memory to find the class. If we do not
find it in memory, we search realtime instead.
2. When moh is restarted (as in, it had been started on this particular channel, stopped,
and now we're starting it again), if using the "files" mode, then realtime will always
be rechecked. If you are using other modes, however, we will simply reattach to the external
running process which was playing moh earlier in the call. This is a necessary compromise so that
we don't end up with too many background processes.
3. musiconhold.conf has a general section now. It has one option: cachertclasses. If set to yes,
then moh classes found in realtime will be added to the in-memory list. This has the advantage
of not requiring database lookups each time moh is started, but it has the disadvantage of not
truly being realtime.
I have tested this for functionality, and it passes. I also tested this under valgrind and there
are no memory problems reported under typical use.
Special thanks to Sergee for implementing this feature and enduring my complaints on the bugtracker!
(closes issue #11196, reported and patched by sergee)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89946 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89559 | tilghman | 2007-11-25 11:17:10 -0600 (Sun, 25 Nov 2007) | 14 lines
We previously attempted to use the ESCAPE clause to set the escape delimiter to
a backslash. Unfortunately, this does not universally work on all databases,
since on databases which natively use the backslash as a delimiter, the
backslash itself needs to be delimited, but on other databases that have no
delimiter, backslashing the backslash causes an error.
So the only solution that I can come up with is to create an option in res_odbc
that explicitly specifies whether or not backslash is a native delimiter. If
it is, we use it natively; if not, we use the ESCAPE clause to make it one.
Reported by: elguero
Patch by: tilghman
(Closes issue #11364)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89561 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In this commit:
- move the ast_register/unregister_app functions to module.h
to avoid the need to include pbx.h for the simpler apps;
- move the ast_group structure to channel.h to remove the
dependency of app.h on linkedlists.h
Note, this is a long process that I am doing in small steps.
The main difficulty is that now for each subsystem we
have a single header (e.g. channel.h) included by the subsystem
provider (usually one file, e.g. channel.c) and by its clients
(dozens of them, e.g. we have some 70+ apps and 30+ functions).
This requires the clients to include all the extra headers
required by the provider (eg. lock.h, linkedlists.h, definitions
of substructures...) even though many of the clients would be
just happy with opaque struct declarations and function prototypes.
The long term plan is to eventually rectify this structure
so that the compilation can become faster, and also APIs
are more stable.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89522 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After this commit we can actually load modules under windows,
and we can start debugging more interesting problems related
to the load order and functionality of modules.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89454 65c4cc65-6c06-0410-ace0-fbb531ad65f3
build times - tested, there is no measureable difference before and
after this commit.
In this change:
use asterisk/compat.h to include a small set of system headers:
inttypes.h, unistd.h, stddef.h, stddint.h, sys/types.h, stdarg.h,
stdlib.h, alloca.h, stdio.h
Where available, the inclusion is conditional on HAVE_FOO_H as determined
by autoconf.
Normally, source files should not include any of the above system headers,
and instead use either "asterisk.h" or "asterisk/compat.h" which does it
better.
For the time being I have left alone second-level directories
(main/db1-ast, etc.).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89333 65c4cc65-6c06-0410-ace0-fbb531ad65f3
through ast_mutex primitives.
To detect all occurrences, I have renamed the lock field in struct ast_channel
so it is clear that it shouldn't be used directly.
There are some uses in res/res_features.c (see details of the diff)
that are error prone as they try and lock two channels without
caring about the order (or without explaining why it is safe).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89293 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This prevents modifying the strings in the stored variables,
and catched a few instances where this was actually done.
Given the differences between trunk and 1.4 (and the fact that this
is effectively an API change) it is better to fix 1.4 independently.
These are
chan_sip.c::sip_register()
chan_skinny.c:: near line 2847
config.c:: near line 1774
logger.c::make_components()
res_adsi.c:: near line 1049
I may have missed some instances for modules that do not build here.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89268 65c4cc65-6c06-0410-ace0-fbb531ad65f3
parked extension is provided as an argument.
(closes issue #10803)
Reported by: outtolunc
Patches:
res_features-parkedcall-any.diff4 uploaded by outtolunc (license 237)
- modified by me to work a bit differently ...
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89250 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
(closes issue #11237)
........
r89248 | qwell | 2007-11-13 13:47:45 -0600 (Tue, 13 Nov 2007) | 7 lines
Revert change from revision 67064.
It is documented behavior that if a parking extension already exists while using PARKINGEXTEN,
dialplan execution will continue. If blind transferring to a Park with PARKINGEXTEN, you
must keep this in mind, and handle the failure yourself.
Issue 11237, reported by jon.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89249 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also fix a common typo I kept seeing (arguement) in various files.
Closes issue #11222, patch by snuffy (with arguement > argument by me).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89202 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- the *_CURRENT macros no longer need the list head pointer argument
- add AST_LIST_MOVE_CURRENT to encapsulate the remove/add operation when moving entries between lists
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89106 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Joshua Colp
Steve Murphy
Russell Bryant
Kevin P. Fleming
Tilghman Lesher
Terry Wilson
Jason Parker
Donny Kavanagh
Philippe Sultan
Mark Michelson
Olle Johansson
Luigi Rizzo