1023 Commits (2eaeea690d14a2c9b8eb962a021a957abdb4444d)

Author	SHA1	Message	Date
Mark Michelson	abbb2edd4c	ARI: Add method to Dial a created channel. ... This adds a new ARI method that allows for you to dial a channel that you previously created in ARI. By combining this with the create method for channels, it allows for a workflow where a channel can be created, manipulated, and then dialed. The channel is under control of the ARI application during all stages of the Dial and can even be manipulated based on channel state changes observed within an ARI application. The overarching goal for this is to eventually be able to add a dialed channel to a Stasis bridge earlier than the "Up" state. However, at the moment more work is needed in the Dial and Bridge APIs in order to facilitate that. ASTERISK-25889 #close Change-Id: Ic6c399c791e66c4aa52454222fe4f8b02483a205	9 years ago
Mark Michelson	dd48d60c5b	ARI: Add method to create a new channel. ... This adds a new ARI method to the channels resource that allows for the creation of a new channel. The channel is created and then placed into the specified Stasis application. This is different from the existing originate method that creates a channel, dials it, and then places the answered channel into the dialplan or a Stasis application. This method does not attempt to call the channel at all. Dialing is left as a later step after channel creation. This allows for pre-dialing channel manipulation if desired. ASTERISK-25889 Change-Id: I3c96a0aba914b08e39f6256371a5bd4c92cbded8	9 years ago
George Joseph	c4064727d2	chan_pjsip: Add 'pjsip show channelstats' ... Added the ability to show channel statistics to chan_pjsip (cli_functions.c) Moved the existing 'pjsip show channel(s)' functionality from pjsip_configuration to cli_functions.c. The stats needed chan_pjsip's private header so it made sense to move the existing channel commands as well. Now using stasis_cache_dump to get the channel snapshots rather than retrieving all endpoints, then getting each one's channel snapshots. Much more efficient. Change-Id: I03b114522126d27434030b285bf6d531ddd79869	9 years ago
Richard Mudgett	8e8cf80cea	res_parking: Fix blind transfer dynamic lots creation. ... Blind transfers to a recognized parking extension need to use the parker's channel variable values to create the dynamic parking lot. This is because there is always only one parker while the parkee may actually be a multi-party bridge. A multi-party bridge can never supply the needed channel variables to create the dynamic parking lot. In the multi-party bridge blind transfer scenario, the parker's CHANNEL(parkinglot) value and channel variables are inherited by the local channel used to park the bridge. * In park_common_setup(), make use the parker instead of the parkee to supply the dynamic parking lot channel variable values. In all but one case, the parkee is the same as the parker. However, in the recognized parking extension blind transfer scenario for a two party bridge they are different channels. For consistency, we need to use the parker channel. * In park_local_transfer(), pass the CHANNEL(parkinglot) value to the local channel when blind transferring a multi-party bridge to a recognized parking extension. * When a local channel starts a call, the Local;2 side needs to inherit the CHANNEL(parkinglot) value from Local;1. The DTMF one-touch parking case wasn't even trying to create dynamic parking lots before it aborted the attempt. * In parking_park_call(), add missing code to create a dynamic parking lot. A DTMF bridge hook is documented as returning -1 to remove the hook. Though the hook caller is really coded to accept non-zero. See the ast_bridge_hook_callback typedef. * In feature_park_call(), don't remove the DTMF one-touch parking hook because of an error. ASTERISK-24605 #close Reported by: Philip Correia Patches: call_park.patch (license #6672) patch uploaded by Philip Correia Change-Id: I221d3a8fcc181877a1158d17004474d35d8016c9	9 years ago
Matt Jordan	ca14b99e6e	main/file: Add the ability to play media in the media cache ... This patch allows applications/APIs that access media through the core file APIs to play media in the media cache. Prior to determining if a 'filename' exists, the filename is passed to the media cache's retrieve API call. If that call succeeds, the local file specified passed back by the API is opened for streaming. When used in this fashion, the 'filename' is actually a URI that the media cache process and understand. ASTERISK-25654 #close Change-Id: I73b6e2e90c3e91b8500581c45cdf9c0dc785f5f0	9 years ago
Matthew Jordan	22e2340813	res/res_http_media_cache: Add an HTTP(S) backend for the core media cache ... This patch adds a bucket backend for the core media cache that interfaces to a remote HTTP server. When a media item is requested in the cache, the cache will query its bucket backends to see if they can provide the media item. If that media item has a scheme of HTTP or HTTPS, this backend will be invoked. The backend provides callbacks for the following: * create - this will always retrieve the URI specified by the provided bucket_file, and store it in the file specified by the object. * retrieve - this will pull the URI specified and store it in a temporary file. It is then up to the media cache to move/rename this file if desired. * delete - destroys the file associated with the bucket_file. * stale - if the bucket_file has expired, based on received HTTP headers from the remote server, or if the ETag on the server no longer matches the ETag stored on the bucket_file, the resource is determined to be stale. Note that the backend respects the ETag, Expires, and Cache-Control headers provided by the HTTP server it is querying. ASTERISK-25654 Change-Id: Ie201c2b34cafc0c90a7ee18d7c8359afaccc5250	9 years ago
Matthew Jordan	6bbcfb34bd	funcs/func_curl: Add the ability for CURL to download and store files ... This patch adds a write option to the CURL dialplan function, allowing it to CURL files and store them locally. The value 'written' to the CURL URL specifies the location on disk to store the file. As an example: same => n,Set(CURL(http://1.1.1.1/foo.wav)=/tmp/foo.wav) Would retrieve the file foo.wav from the remote server and store it in the /tmp directory. Due to the potentially dangerous nature of this function call, APIs are forbidden from using the write functionality unless live_dangerously is set to True in asterisk.conf. ASTERISK-25652 #close Change-Id: I44f4ad823d7d20f04ceaad3698c5c7f653c41b0d	9 years ago
George Joseph	2b9849625c	res_pjsip_caller_id: Anonymize 'From' when caller id presentation is prohibited ... Per RFC3325, the 'From' header is now anonymized on outgoing calls when caller id presentation is prohibited. TID = trust_id_outbound PRO = Set(CALLERID(pres)=prohib) USR = endpoint/from_user DOM = endpoint/from_domain PAI = YES(privacy=off), NO(not sent), PRI(privacy=full) (assumes send_pai=yes) Conditions |Result --------------------|---------------------------------------------------- TID PRO USR DOM |PAI FROM --------------------|---------------------------------------------------- Y Y abc def.ghi |PRI "Anonymous" <sip:abc@def.ghi> Y Y abc |PRI "Anonymous" <sip:abc@anonymous.invalid> Y Y def.ghi |PRI "Anonymous" <sip:anonymous@def.ghi> Y Y |PRI "Anonymous" <sip:anonymous@anonymous.invalid> Y N abc def.ghi |YES <sip:abc@def.ghi> Y N abc |YES <sip:abc@<ip_address>> Y N def.ghi |YES "Caller Name" <sip:<caller_exten>@def.ghi> Y N |YES "Caller Name" <sip:<caller_exten>@<ip_address>> N Y abc def.ghi |NO "Anonymous" <sip:abc@def.ghi> N Y abc |NO "Anonymous" <sip:abc@anonymous.invalid> N Y def.ghi |NO "Anonymous" <sip:anonymous@def.ghi> N Y |NO "Anonymous" <sip:anonymous@anonymous.invalid> N N abc def.ghi |YES <sip:abc@def.ghi> N N abc |YES <sip:abc@<ip_address>> N N def.ghi |YES "Caller Name" <sip:<caller_exten>@def.ghi> N N |YES "Caller Name" <sip:<caller_exten>@<ip_address>> ASTERISK-25791 #close Reported-by: Anthony Messina Change-Id: I2c82a5ca1413c2c00fb62ea95b0ae8e97af54dc9	9 years ago
zuul	7023055def	Merge "build-system: Allow building with static pjproject"	9 years ago
Richard Mudgett	25de01f301	SIP diversion: Fix REDIRECTING(reason) value inconsistencies. ... Previous chan_sip behavior: Before this patch chan_sip would always strip any quotes from an incoming reason and pass that value up as the REDIRECTING(reason). For an outgoing reason value, chan_sip would check the value against known values and quote any it didn't recognize. Incoming 480 response message reason text was just assigned to the REDIRECTING(reason). Previous chan_pjsip behavior: Before this patch chan_pjsip would always pass the incoming reason value up as the REDIRECTING(reason). For an outgoing reason value, chan_pjsip would send the reason value as passed down. With this patch: Both channel drivers match incoming reason values with values documented by REDIRECTING(reason) and values documented by RFC5806 regardless of whether they are quoted or not. RFC5806 values are mapped to the equivalent REDIRECTING(reason) documented value and is set in REDIRECTING(reason). e.g., an incoming RFC5806 'unconditional' value or a quoted string version ('"unconditional"') is converted to REDIRECTING(reason)'s 'cfu' value. The user's dialplan only needs to deal with 'cfu' instead of any of the aliases. The incoming 480 response reason text supported by chan_sip checks for known reason values and if not matched then puts quotes around the reason string and assigns that to REDIRECTING(reason). Both channel drivers send outgoing known REDIRECTING(reason) values as the unquoted RFC5806 equivalent. User custom values are either sent as is or with added quotes if SIP doesn't allow a character within the value as part of a RFC3261 Section 25.1 token. Note that there are still limitations on what characters can be put in a custom user value. e.g., embedding quotes in the middle of the reason string is silly and just going to cause you grief. * Setting a REDIRECTING(reason) value now recognizes RFC5806 aliases. e.g., Setting REDIRECTING(reason) to 'unconditional' is converted to the 'cfu' value. * Added missing malloc() NULL return check in res_pjsip_diversion.c set_redirecting_reason(). * Fixed potential read from a stale pointer in res_pjsip_diversion.c add_diversion_header(). The reason string needed to be copied into the tdata memory pool to ensure that the string would always be available. Otherwise, if the reason string returned by reason_code_to_str() was a user's reason string then the string could be freed later by another thread. Change-Id: Ifba83d23a195a9f64d55b9c681d2e62476b68a87	9 years ago
George Joseph	3173e91bab	build-system: Allow building with static pjproject ... Background here: http://lists.digium.com/pipermail/asterisk-dev/2016-January/075266.html From CHANGES: * To help insure that Asterisk is compiled and run with the same known version of pjproject, a new option (--with-pjproject-bundled) has been added to ./configure. When specified, the version of pjproject specified in third-party/versions.mak will be downloaded and configured. When you make Asterisk, the build process will also automatically build pjproject and Asterisk will be statically linked to it. Once a particular version of pjproject is configured and built, it won't be configured or built again unless you run a 'make distclean'. To facilitate testing, when 'make install' is run, the pjsua and pjsystest utilities and the pjproject python bindings will be installed in ASTDATADIR/third-party/pjproject. The default behavior remains building with the shared pjproject installation, if any. Building: All you have to do is include the --with-pjproject-bundled option on the ./configure command line (and remove any existing --with-pjproject option if specified). Everything else is automatic. Behind the scenes: The top-level Makefile was modified to include 'third-party' in the list of MOD_SUBDIRS. The third-party directory was created to contain any third party packages that may be needed in the future. Its Makefile automatically iterates over any subdirectories passing on targets. The third-party/pjproject directory was created to house the pjproject source distribution. Its Makefile contains targets to download, patch configure, generate dependencies, compile libs, apps and python bindings, sanitized build.mak and generate a symbols list. When bootstrap.sh is run, it automatically includes the configure.m4 file in third-party/pjproject. This file has a macro to download and conifgure pjproject and get and set PJPROJECT_INCLUDE, PJPROJECT_DIR and PJPROJECT_BUNDLED. It also tests for the capabilities like PJ_TRANSACTION_GRP_LOCK by parsing preprocessor output as opposed to trying to compile. Of course, bootstrap.sh is only run once and the configure file is incldued in the patch. When configure is run with the new options, the macro in configure.m4 triggers the download, patch, conifgure and tests. No compilation is performed at this time. The downloaded tarball is cached in /tmp so it doesn't get downloaded again on a distclean. When make is run in the top-level Asterisk source directory, it will automatically descend all the subdirectories in third_party just as it does for addons, apps, etc. The top-level Makefile makes sure that the 'third-party' is built before 'main' so that dependencies from the other directories are built first. When main does build, a new shared library (libasteriskpj) is created that links statically to the pjproject .a files and exports all their symbols. The asterisk binary links to that, just as it does with libasteriskssl. When Asterisk is installed, the pjsua and pjsystest apps, and the pjproject python bindings are installed in ASTDATADIR/third-party/pjproject. This will facilitate testing, including running the testsuite which will be updated to check that directory for the pjsua module ahead of the system python library. Modules should continue to depend on pjproject if they use pjproject APIs directly. They should not care about the implementation. No changes to any res_pjsip modules were made. Change-Id: Ia7a60c28c2e9ba9537c5570f933c1ebcb20a3103	9 years ago
Joshua Colp	62d98b5a7f	Merge "res_pjsip/config_transport: Allow reloading transports."	9 years ago
zuul	170941990b	Merge "chan_sip: Optionally supply fromuser/fromdomain in SIP dial string."	9 years ago
zuul	062857ece3	Merge "res_pjsip_config_wizard: Add command to export primitive objects"	9 years ago
George Joseph	ba8adb4ce3	res_pjsip/config_transport: Allow reloading transports. ... The 'reload' mechanism actually involves closing the underlying socket and calling the appropriate udp, tcp or tls start functions again. Only outbound_registration, pubsub and session needed work to reset the transport before sending requests to insure that the pjsip transport didn't get pulled out from under them. In my testing, no calls were dropped when a transport was changed for any of the 3 transport types even if ip addresses or ports were changed. To be on the safe side however, a new transport option was added (allow_reload) which defaults to 'no'. Unless it's explicitly set to 'yes' for a transport, changes to that transport will be ignored on a reload of res_pjsip. This should preserve the current behavior. Change-Id: I5e759850e25958117d4c02f62ceb7244d7ec9edf	9 years ago
Walter Doekes	c00082329e	chan_sip: Optionally supply fromuser/fromdomain in SIP dial string. ... Previously you could add [!dnid] to the SIP dial string to alter the To: header. This change allows you to alter the From header as well. SIP dial string extra options now look like this: [![touser[@todomain]][![fromuser][@fromdomain]]] INCOMPATIBLE CHANGE: If you were using an exclamation mark in your To: header, that is no longer possible. ASTERISK-25803 #close Change-Id: I2457e9ba7a89eb1da22084bab5a4d4328e189db7	9 years ago
George Joseph	f8767a8804	res_pjproject: Add ability to map pjproject log levels to Asterisk log levels ... Warnings and errors in the pjproject libraries are generally handled by Asterisk. In many cases, Asterisk wouldn't even consider them to be warnings or errors so the messages emitted by pjproject directly are either superfluous or misleading. A good exampe of this are the level-0 errors pjproject emits when it can't open a TCP/TLS socket to a client to send an OPTIONS. We don't consider a failure to qualify a UDP client an "ERROR", why should a TCP/TLS client be treated any differently? A config file for res_pjproject has bene added (pjproject.conf) and a new log_mappings object allows mapping pjproject levels to Asterisk levels (or nothing). The defaults if no pjproject.conf file is found are the same as those that were hard-coded into res_pjproject initially: 0,1 = LOG_ERROR, 2 = LOG_WARNING, 3,4,5 = LOG_DEBUG<level> Change-Id: Iba7bb349c70397586889b8f45b8c3d6c6c8c3898	9 years ago
George Joseph	4f08e9fb64	res_pjsip_config_wizard: Add command to export primitive objects ... A new command (pjsip export config_wizard primitives) has been added that will export all the pjsip objects it created to the console or a file suitable for reuse in a pjsip.conf file. ASTERISK-24919 #close Reported-by: Ray Crumrine Change-Id: Ica2a5f494244b4f8345b0437b16d06aa0484452b	9 years ago
Joshua Colp	e541d9cf34	Merge topic 'ASTERISK-20987' ... * changes: app_confbridge: Add ability to get the muted conference state. app_confbridge.c: Update CONFBRIDGE and CONFBRIDGE_INFO documentation. app_confbridge: Make non-admin users join a muted conference muted.	9 years ago
Joshua Colp	299278c45b	Merge "app_queue: Add Lastpause field of queue member"	9 years ago
Sean Bright	d83dba7099	res_rtp_asterisk: Allow ICE host candidates to be overriden ... During ICE negotiation the IPs of the local interfaces are sent to the remote peer as host candidates. In many cases Asterisk is behind a static one-to-one NAT, so these host addresses will be internal IP addresses. To help in hiding the topology of the internal network, this patch adds the ability to override the host candidates by matching them against a user-defined list of replacements. Change-Id: I1c9541af97b83a4c690c8150d19bf7202c8bff1f	10 years ago
Richard Mudgett	7932336a3d	app_confbridge: Add ability to get the muted conference state. ... * Added CONFBRIDGE_INFO(muted,) for querying the muted conference state. * Added Muted header to AMI ConfbridgeListRooms action response list events to indicate the muted conference state. * Added Muted column to CLI "confbridge list" output to indicate the muted conference state and made the locked column a yes/no value instead of a locked/unlocked value. ASTERISK-20987 Reported by: hristo Change-Id: I4076bd8ea1c23a3afd4f5833e9291b49a0c448b1	10 years ago
Rodrigo Ramírez Norambuena	f299dc0d76	app_queue: Add Lastpause field of queue member ... Add time when started a the last pause for a queue member for QueueMemberStatus ami event. Also show accumulate time in seconds when started a pause for a queue member to CLI command 'queue show'. ASTERISK-16394 #close Change-Id: I4b12aa3b2efa8d02939db3e13712510b4879865c	10 years ago
George Joseph	dd5c063934	res_pjproject: Add module providing pjproject logging and utils ... res_pjsip_log_forwarder has been renamed to res_pjproject and enhanced as follows: As a follow-on to the recent 'Add CLI "pjsip show buildopts"' patch, a new ast_pjproject_get_buildopt function has been added. It allows the caller to get the value of one of the buildopts. The initial use case is retrieving the runtime value of PJ_MAX_HOSTNAME to insure we don't send a hostname greater than pjproject can handle. Since it can differ between the version of pjproject that Asterisk was compiled against and the version of pjproject that Asterisk is running against, we can't use the PJ_MAX_HOSTNAME macro directly in Asterisk source code. Change-Id: Iab6e82fec3d7cf00c1cf6185c42be3e7569dee1e	10 years ago
Daniel Journo	8182146e85	pjsip: Add option global/regcontext ... Added new global option (regcontext) to pjsip. When set, Asterisk will dynamically create and destroy a NoOp priority 1 extension for a given endpoint who registers or unregisters with us. ASTERISK-25670 #close Reported-by: Daniel Journo Change-Id: Ib1530c5b45340625805c057f8ff1fb240a43ea62	10 years ago
George Joseph	a41aab477a	pjsip_sdp_rtp: Add option endpoint/bind_rtp_to_media_address ... On a system with multiple ip addresses in the same subnet, if a transport is bound to a specific ip address and endpoint/media_address is set, the SIP/SDP will have the correct address in all fields but the rtp stream MAY still originate from one of the other ip addresses, most probably the "primary" ip address. This happens because res_pjsip_sdp_rtp/create_rtp always calls ast_instance_new with the "all" ip address (0.0.0.0 or ::). The new option causes res_pjsip_sdp_rtp/create_rtp to call ast_rtp_instance_new with the endpoint's media_address (if specified) instead of the "all" address. This causes the packets to originate from the specified address. ASTERISK-25632 ASTERISK-25637 Reported-by: Olivier Krief Reported-by: Dan Journo Change-Id: I3dfaa079e54ba7fb7c4fd1f5f7bd9509bbf8bd88	10 years ago
George Joseph	6d18fe151c	voicemail: Move app_voicemail / res_mwi_external conflict to runtime ... The menuselect conflict between app_voicemail and res_mwi_external makes it hard to package 1 version of Asterisk. There no actual build dependencies between the 2 so moving this check to runtime seems like a better solution. The ast_vm_register and ast_vm_greeter_register functions in app.c were modified to return AST_MODULE_LOAD_DECLINE instead of -1 if there is already a voicemail module registered. The modules' load_module functions were then modified to return DECLINE instead of -1 to the loader. Since -1 is interpreted by the loader as AST_MODULE_LOAD_FAILURE, the modules were incorrectly causing Asterisk to stop so this needed to be cleaned up anyway. Now you can build both and use modules.conf to decide which voicemail implementation to load. The default menuselect options still build app_voicemail and not res_mwi_external but if both ARE built, res_mwi_external will load first and become the voicemail provider unless modules.conf rules prevent it. This is noted in CHANGES. Change-Id: I7d98d4e8a3b87b8df9e51c2608f0da6ddfb89247	10 years ago
Matt Jordan	9cdf3ec19d	res_pjsip_history: Add a module that provides PJSIP history for debugging ... This patch adds a new module, res_pjsip_history, that provides a slightly better way of debugging SIP message traffic on a busy Asterisk system. The existing mechanisms all rely on passively dumping a SIP message to the CLI. While this is perfectly fine for logging purposes and well controlled environments, on many installations, the amount of SIP messages Asterisk receives will quickly swamp the CLI. This makes it difficult to view/capture those messages that you want to diagnose in real time. This patch provides another way of handling this. When enabled, the module will store SIP message traffic in memory. This traffic can then be queried at leisure. In order to make the querying useful, a CLI command has been implemented, 'pjsip show history', that supports a basic expression syntax similar to SQL or other query languages. A small number of useful fields have been added in this initial patch; additional fields can easily be added in later improvements. Those fields are: - number: The entry index in the history - timestamp: The time the message was recieved - addr: The source/destination address of the message - sip.msg.request.method: The request method - sip.msg.call-id: The Call-ID header Note - this is a resurrection of the module initially proposed on Review Board here: https://reviewboard.asterisk.org/r/4053/ Change-Id: I39bd74ce998e99ad5ebc0aab3e84df3a150f8e36	10 years ago
Joshua Colp	902309fd04	res_sorcery_memory_cache: Add support for a full backend cache. ... This change introduces the configuration option 'full_backend_cache' which changes the cache to be a full mirror of the backend instead of a per-object cache. This allows all sorcery retrieval operations to be carried out against it and is useful for object types which are used in a "retrieve all" or "retrieve some" pattern. ASTERISK-25625 #close Change-Id: Ie2993487e9c19de563413ad5561c7403b48caab5	10 years ago
Matt Jordan	75c800eb28	Revert "bridges/bridge_t38: Add a bridging module for managing T.38 state" ... This reverts commit f42d22d3a1. Unfortunately, using a bridge to manage T.38 state will cause severe deadlocks in core_unreal/chan_local. Local channels attempt to reach across both their peer and the peer's bridge to inspect T.38 state. Given the propensity of Local channel chains, managing the locking situation in such a scenario is practically infeasible. Change-Id: I932107387c13aad2c75a7a4c1e94197a9d6d8a51	10 years ago
Alexander Traud	63c6d39a3e	res_format_attr_vp8: In SDP, forward max-fr and max-fs for video-codec VP8. ... ASTERISK-25584 #close Change-Id: Iae00071b4ff1ae76f24995aeac4d00284fd14f91	10 years ago
Matt Jordan	f42d22d3a1	bridges/bridge_t38: Add a bridging module for managing T.38 state ... When 4875e5ac32 was merged, it fixed several issues with a direct media bridge transitioning to handling a T.38 fax. However, it uncovered a race condition caused by the bridging core. When a channel involved in a T.38 fax leaves a bridge, the frame queued by the channel driver that should inform the far side that it is no longer in a T.38 fax may not make it across the bridge. The bridging framework is *extremely* aggressive in tearing down the bridge, and control frames that are currently in flight *may* get dropped. This patch adds a new module to the bridging framework, bridge_t38. This module maintains some notion of the T.38 state for the two channels in a bridge. When the bridge detects that it is being torn down or when one of the two channels leaves, it informs the respective channel(s) that they should stop faxing. This ensures that channels switch back to audio if they survive and are ejected out of a bridge while faxing. ASTERISK-25582 Change-Id: If5b0bb478eb01c4607c9f4a7fc17c7957d260ea0	10 years ago
Niklas Larsson	7cb8f2f33e	CHANGES: Fix a typo ... Change-Id: Iceb3d9bb78140c376174a7bee197dfcf8ef9cda7	10 years ago
David M. Lee	91346b9fb7	Fixed some typos ... Fixes some minor typos in the CHANGES file, plus an embarrasing typo in the StatsD API. Change-Id: I9ca4858c64a4a07d2643b81baa64baebb27a4eb7	10 years ago
Matt Jordan	86e7135ea8	Merge "res/res_endpoint_stats: Add module to emit endpoint StatsD statistics"	10 years ago
Matt Jordan	ee9c114747	res/res_endpoint_stats: Add module to emit endpoint StatsD statistics ... This patch adds a module that emits StatsD statistics about Asterisk endpoints. This includes: * A GAUGE statistic for endpoint states, tracking how many endpoints are in a particular state. * A GAUGE statistic for each endpoint, counting the number of channels currently associated with an endpoint. ASTERISK-25572 Change-Id: If7e1333c5aeda8d136850b30c2101c0ee1c97305	10 years ago
Matt Jordan	64766aac48	Merge "res_pjsip/pjsip_options: Add StatsD statistics for PJSIP contacts"	10 years ago
Matt Jordan	75d90a9951	res_pjsip/pjsip_options: Add StatsD statistics for PJSIP contacts ... This patch adds the ability to send StatsD statistics related to the state of PJSIP contacts. This includes: * A GUAGE statistic measuring the count of contacts in a particular state. This measures how many contacts are reachable, unreachable, etc. * The RTT time for each contact, if those contacts are qualified. This provides StatsD engines useful time-based data about each contact. ASTERISK-25571 Change-Id: Ib8378d73afedfc622be0643b87c542557e0b332c	10 years ago
Matt Jordan	482f2fc5ff	res/res_pjsip_outbound_registration: Add registration statistics for StatsD ... This patch adds outbound registration statistics for StatsD. This includes the following: * A GUAGE metric for the overall count of outbound registrations. * A GUAGE metric for each state an outbound registration can be in. As the outbound registrations change state, the overall count of how many outbound registrations are in the particular state is changed. These statistics are particularly useful for systems with a large number of SIP trunks, and where measuring the change in state of the trunks is useful for monitoring. ASTERISK-25571 Change-Id: Iba6ff248f5d1c1e01acbb63e9f0da1901692eb37	10 years ago
Alec Davis	8c14b91651	app_bridgeaddchan: ability to barge into existing call ... To be able to barge into a call by dialling a prefix+extension that maps to the extensions device. Senario is that DECT headset users may be away from their desks and need to transfer the call, the goal is that from any phone they dial a prefix then their extension and are added to the bridge that they are in, from there they can drop the headset call, as it's also on the handset, and transfer the caller. The dialplan would look like, where prefix=73, extension = 8512; exten => _738512,1,BridgeAdd(SIP/cisco0001) ASTERISK-25551 #close Reported By: Alec Davis Change-Id: I8eb5096a02168dcc8d7aeea416ef36ba4ed10540	10 years ago
Mark Michelson	ed13732188	Confbridge: Add a user timeout option ... This option adds the ability to specify a timeout, in seconds, for a participant in a ConfBridge. When the user's timeout has been reached, the user is ejected from the conference with the CONFBRIDGE_RESULT channel variable set to "TIMEOUT". The rationale for this change is that there have been times where we have seen channels get "stuck" in ConfBridge because a network issue results in a SIP BYE not being received by Asterisk. While these channels can be hung up manually via CLI/AMI/ARI, adding some sort of automatic cleanup of the channels is a nice feature to have. ASTERISK-25549 #close Reported by Mark Michelson Change-Id: I2996b6c5e16a3dda27595f8352abad0bda9c2d98	10 years ago
Walter Doekes	7dd8f89a50	func_callerid: Document that CALLERID(pres) is available. ... CALLERPRES() says that it's deprecated in favor of CALLERID(num-pres) and CALLERID(name-pres). But for channel driver that don't make a distinction between the two (e.g. SIP), it makes more sense to get/set both at once. This change reveals the availability of CALLERID(pres), CONNECTEDLINE(pres), REDIRECTING(orig-pres), REDIRECTING(to-pres) and REDIRECTING(from-pres). ASTERISK-25373 #close Change-Id: I5614ae4ab7d3bbe9c791c1adf147e10de8698d7a	10 years ago
Corey Farrell	40574a2ea3	chan_sip: Allow websockets to be disabled. ... This patch adds a new setting "websockets_enabled" to sip.conf. Setting this to false allows chan_sip to be used without causing conflicts with res_pjsip_transport_websocket. ASTERISK-24106 #close Reported by: Andrew Nagy Change-Id: I04fe8c4f2d57b2d7375e0e25826c91a72e93bea7	10 years ago
Matt Jordan	2ddd9ff2d9	Merge "app_queue: Added reason pause of member"	10 years ago
George Joseph	a8aee0bbdb	res_pjsip: Add "like" processing to pjsip list and show commands ... Add the ability to filter output from pjsip list and show commands using the "like" predicate like chan_sip. For endpoints, aors, auths, registrations, identifyies and transports, the modification was a simple change of an ast_sorcery_retrieve_by_fields call to ast_sorcery_retrieve_by_regex. For channels and contacts a little more work had to be done because neither of those objects are true sorcery objects. That was just removing the non-matching object from the final container. Of course, a little extra plumbing in the common pjsip_cli code was needed to parse the "like" and pass the regex to the get_container callbacks. Some of the get_container code in res_pjsip_endpoint_identifier was also refactored for simplicity. ASTERISK-25477 #close Reported by: Bryant Zimmerman Tested by: George Joseph Change-Id: I646d9326b778aac26bb3e2bcd7fa1346d24434f1	10 years ago
Joshua Colp	08fe5256a9	Merge "res_pjsip_outbound_registration: registration stops due to fatal 4xx response"	10 years ago
Kevin Harwell	691c0e0b31	res_pjsip_outbound_registration: registration stops due to fatal 4xx response ... During outbound registration it is possible to receive a fatal (any permanent/ non-temporary 4xx, 5xx, 6xx) response from the registrar that is simply due to a problem with the registrar itself. Upon receiving the failure response Asterisk terminates outbound registration for the given endpoint. This patch adds an option, 'fatal_retry_interval', that when set continues outbound registration at the given interval up to 'max_retries' upon receiving a fatal response. ASTERISK-25485 #close Change-Id: Ibc2c7b47164ac89cc803433c0bbe7063bfa143a2	10 years ago
Matt Jordan	7be6194d6f	funcs/func_holdintercept: Actually add the HOLD_INTERCEPT function ... When ab803ec342 was committed, it accidentally forgot to actually *add* the HOLD_INTERCEPT function. This highlights two interesting points: * Gerrit forces you to put the patch as it is going to into the repo up for review, which Review Board did not. Yay Gerrit. * No one apparently bothered to use this feature, or else they don't know about it. I'm going to go with the latter explanation. ASTERISK-24922 Change-Id: Ida38278f259dd07c334a36f9b7d5475b5db72396	10 years ago
Rodrigo Ramírez Norambuena	92fa8d1e0e	app_queue: Added reason pause of member ... In app_queue added value Paused Reason on QueueMemberStatus when a member on queue is paused and the reason was set. ASTERISK-25480 #close Reporte by: Rodrigo Ramírez Norambuena Change-Id: Ia5db503482f50764c15e2020196c785f59d4a68e	10 years ago
Matt Jordan	2d7a4a3357	main/logger: Add log formatters and JSON structured logs ... When Asterisk is part of a larger distributed system, log files are often gathered using tools (such as logstash) that prefer to consume information and have it rendered using other tools (such as Kibana) that prefer a structured format, e.g., JSON. This patch adds support for JSON formatted logs by adding support for an optional log format specifier in Asterisk's logging subsystem. By adding a format specifier of '[json]': full => [json]debug,verbose,notice,warning,error Log messages will be output to the 'full' channel in the following format: { "hostname": Hostname or name specified in asterisk.conf "timestamp": Date/Time "identifiers": { "lwp": Thread ID, "callid": Call Identifier } "logmsg": { "location": { "filename": Name of the file that generated the log statement "function": Function that generated the log statement "line": Line number that called the logging function } "level": Log level, e.g., DEBUG, VERBOSE, etc. "message": Actual text of the log message } } ASTERISK-25425 #close Change-Id: I8649bfedf3fb7bf3138008cc11565553209cc238	10 years ago