3732 Commits (2da358a3cbb7cb1c7a5bfd5c227a657c4a2b45d2)

Author	SHA1	Message	Date
Joshua Colp	1e41d14822	Merge "chan_sip: Make autocreated peers send PeerStatus events"	10 years ago
Joshua Colp	c480159045	chan_sip: Give more time for TCP/TLS threads to stop. ... The unload process currently tells each TCP/TLS to terminate but does not wait for them to do so. This introduces a race condition where the container holding the threads may be destroyed before the threads are able to remove themselves from it. When they finally do the container is invalid and can't be used causing a crash. A previous change existed which waited a bit to wait for any stranglers to finish. This change extends this and waits longer. ASTERISK-25961 #close Change-Id: Idc6262b670ca49ede32061159e323b7b63c6f3c6	10 years ago
kkm	41ecf22587	chan_sip: Make autocreated peers send PeerStatus events ... Since Stasis has been introduced, an attempt to send AMI messages by an autocreated peer caused a crash, and all events from autocreated peers were semi-inadvertently disabled altogether in 0b83761. This change restores the disabled functionality. ASTERISK-25950 Change-Id: Iecc350f23db603fadb2f302064643ebe9664e974	10 years ago
Jaco Kroon	f06ce7f90a	chan_sip: Don't verify table if rtupdate=no ... If rtupdate=no do not verify sipregs/peers table has updatable fields. ASTERISK-25934 #close Change-Id: Iaa2c53037b93daccc7e7333c40d61861847b856d	10 years ago
Richard Mudgett	6138a75e8e	pbx.h: Make ast_state_cb_type take more const. ... This eliminates some casts that I made a note saying v10 and above would no longer need them. Better late than never :) Change-Id: I346cdb3032b6478ceb40eb6fe732978b54035572	10 years ago
Alexander Traud	3f720155b7	chan_sip: Do not send all codecs on INVITE. Do not break on Session-Timers. ... Asterisk 13.7.0 included a fix for ASTERISK-24543, not to send all those codecs, which the caller did not request/support. That fix was not complete because on the second Session Timer all codecs were sent again. Some VoIP/SIP clients interpreted that complete codec-list as a change in the SIP session. Because of that, Asterisk did not send the RTP audio via NAT anymore which created a non-audio scenario after the second Session Timer fired. ASTERISK-24543 #close Change-Id: I1881827816ab7fd47eb4287a95961179b34a0b66	10 years ago
Francesco Castellano	ac66999971	chan_sip.c: Space after port causes unnecessary resolution attempt ... check_via() already skips leading blanks where the sent-by address (with the optional port) should be placed. Since RFC 3261 allows for blanks between the port ant the Via parameters: > https://tools.ietf.org/html/rfc3261#section-20.42 (actually it allows a lot of blanks more ;-)). I just switched from ast_skip_blanks() to ast_strip() on the local copy of the string. ASTERISK-21301 #close Change-Id: Ie5b8fe5a07067b7c0dc9bcdd1707e99b23b02b06	10 years ago
Joshua Colp	7d63b4499e	Merge "chan_sip.c: Made sip_reinvite_retry() call sip_pvt_lock_full()."	10 years ago
Richard Mudgett	810f92c9dc	chan_sip.c: Fix mwi resub deadlock potential. ... This patch is part of a series to resolve deadlocks in chan_sip.c. Stopping a scheduled event can result in a deadlock if the scheduled event is running when you try to stop the event. If you hold a lock needed by the scheduled event while trying to stop the scheduled event then a deadlock can happen. The general strategy for resolving the deadlock potential is to push the actual starting and stopping of the scheduled events off onto the scheduler/do_monitor() thread by scheduling an immediate one shot scheduled event. Some restructuring may be needed because the code may assume that the start/stop of the scheduled events is immediate. ASTERISK-25023 #close Change-Id: I96d429c57a48861fd8bde63dd93db4e92dc3adb6	10 years ago
Richard Mudgett	72c444ba37	chan_sip.c: Fix registration timeout and expire deadlock potential. ... This patch is part of a series to resolve deadlocks in chan_sip.c. Stopping a scheduled event can result in a deadlock if the scheduled event is running when you try to stop the event. If you hold a lock needed by the scheduled event while trying to stop the scheduled event then a deadlock can happen. The general strategy for resolving the deadlock potential is to push the actual starting and stopping of the scheduled events off onto the scheduler/do_monitor() thread by scheduling an immediate one shot scheduled event. Some restructuring may be needed because the code may assume that the start/stop of the scheduled events is immediate. ASTERISK-25023 Change-Id: I2e40de89efc8ae6e8850771d089ca44bc604b508	10 years ago
Richard Mudgett	fbf8e04aed	chan_sip.c: Fix t38id deadlock potential. ... This patch is part of a series to resolve deadlocks in chan_sip.c. Stopping a scheduled event can result in a deadlock if the scheduled event is running when you try to stop the event. If you hold a lock needed by the scheduled event while trying to stop the scheduled event then a deadlock can happen. The general strategy for resolving the deadlock potential is to push the actual starting and stopping of the scheduled events off onto the scheduler/do_monitor() thread by scheduling an immediate one shot scheduled event. Some restructuring may be needed because the code may assume that the start/stop of the scheduled events is immediate. ASTERISK-25023 Change-Id: If595e4456cd059d7171880c7f354e844c21b5f5f	10 years ago
Richard Mudgett	c7fdff2e37	chan_sip.c: Fix reinviteid deadlock potential. ... This patch is part of a series to resolve deadlocks in chan_sip.c. Stopping a scheduled event can result in a deadlock if the scheduled event is running when you try to stop the event. If you hold a lock needed by the scheduled event while trying to stop the scheduled event then a deadlock can happen. The general strategy for resolving the deadlock potential is to push the actual starting and stopping of the scheduled events off onto the scheduler/do_monitor() thread by scheduling an immediate one shot scheduled event. Some restructuring may be needed because the code may assume that the start/stop of the scheduled events is immediate. ASTERISK-25023 Change-Id: I9c11b9d597468f63916c99e1dabff9f4a46f84c1	10 years ago
Richard Mudgett	f484ddbdfe	chan_sip.c: Fix packet retransid deadlock potential. ... This patch is part of a series to resolve deadlocks in chan_sip.c. Stopping a scheduled event can result in a deadlock if the scheduled event is running when you try to stop the event. If you hold a lock needed by the scheduled event while trying to stop the scheduled event then a deadlock can happen. The general strategy for resolving the deadlock potential is to push the actual starting and stopping of the scheduled events off onto the scheduler/do_monitor() thread by scheduling an immediate one shot scheduled event. Some restructuring may be needed because the code may assume that the start/stop of the scheduled events is immediate. * Fix retrans_pkt() to call check_pendings() with both the owner channel and the private objects locked as required. * Refactor dialog retransmission packet list to safely remove packet nodes. The list nodes are now ao2 objects. The list has a ref and the scheduled entry has a ref. ASTERISK-25023 Change-Id: I50926d81be53f4cd3d572a3292cd25f563f59641	10 years ago
Richard Mudgett	7ea1e181dc	chan_sip.c: Fix waitid deadlock potential. ... This patch is part of a series to resolve deadlocks in chan_sip.c. Stopping a scheduled event can result in a deadlock if the scheduled event is running when you try to stop the event. If you hold a lock needed by the scheduled event while trying to stop the scheduled event then a deadlock can happen. The general strategy for resolving the deadlock potential is to push the actual starting and stopping of the scheduled events off onto the scheduler/do_monitor() thread by scheduling an immediate one shot scheduled event. Some restructuring may be needed because the code may assume that the start/stop of the scheduled events is immediate. * Made always run check_pendings() under the scheduler thread so scheduler ids can be checked safely. ASTERISK-25023 Change-Id: Ia834d6edd5bdb47c163e4ecf884428a4a8b17d52	10 years ago
Richard Mudgett	02458cc6fd	chan_sip.c: Fix session timers deadlock potential. ... This patch is part of a series to resolve deadlocks in chan_sip.c. Stopping a scheduled event can result in a deadlock if the scheduled event is running when you try to stop the event. If you hold a lock needed by the scheduled event while trying to stop the scheduled event then a deadlock can happen. The general strategy for resolving the deadlock potential is to push the actual starting and stopping of the scheduled events off onto the scheduler/do_monitor() thread by scheduling an immediate one shot scheduled event. Some restructuring may be needed because the code may assume that the start/stop of the scheduled events is immediate. ASTERISK-25023 Change-Id: I6d65269151ba95e0d8fe4e9e611881cde2ab4900	10 years ago
Richard Mudgett	69810b306d	chan_sip.c: Fix autokillid deadlock potential. ... This patch is part of a series to resolve deadlocks in chan_sip.c. Stopping a scheduled event can result in a deadlock if the scheduled event is running when you try to stop the event. If you hold a lock needed by the scheduled event while trying to stop the scheduled event then a deadlock can happen. The general strategy for resolving the deadlock potential is to push the actual starting and stopping of the scheduled events off onto the scheduler/do_monitor() thread by scheduling an immediate one shot scheduled event. Some restructuring may be needed because the code may assume that the start/stop of the scheduled events is immediate. * Fix clearing autokillid in __sip_autodestruct() even though we could reschedule. ASTERISK-25023 Change-Id: I450580dbf26e2e3952ee6628c735b001565c368f	10 years ago
Richard Mudgett	67c79c326d	chan_sip.c: Fix provisional_keepalive_sched_id deadlock. ... This patch is part of a series to resolve deadlocks in chan_sip.c. Stopping a scheduled event can result in a deadlock if the scheduled event is running when you try to stop the event. If you hold a lock needed by the scheduled event while trying to stop the scheduled event then a deadlock can happen. The general strategy for resolving the deadlock potential is to push the actual starting and stopping of the scheduled events off onto the scheduler/do_monitor() thread by scheduling an immediate one shot scheduled event. Some restructuring may be needed because the code may assume that the start/stop of the scheduled events is immediate. ASTERISK-25023 Change-Id: I98a694fd42bc81436c83aa92de03226e6e4e3f48	10 years ago
Richard Mudgett	76be7093cd	chan_sip.c: Adjust how dialog_unlink_all() stops scheduled events. ... This patch is part of a series to resolve deadlocks in chan_sip.c. * Make dialog_unlink_all() unschedule all items at once in the sched thread. ASTERISK-25023 Change-Id: I7743072fb228836e8228b72f6dc46c8cc50b3fb4	10 years ago
Richard Mudgett	52f0932e4c	chan_sip.c: Clear scheduled immediate events on unload. ... This patch is part of a series to resolve deadlocks in chan_sip.c. The reordering of chan_sip's shutdown is to handle any immediate events that get put onto the scheduler so resources aren't leaked. The typical immediate events at this time are going to be concerned with stopping other scheduled events. ASTERISK-25023 Change-Id: I3f6540717634f6f2e84d8531a054976f2bbb9d20	10 years ago
Richard Mudgett	cb97198ca6	chan_sip.c: Simplify sip_pvt destructor call levels. ... Remove destructor calling destroy_it calling really_destroy_it for no benefit. Just make the destructor the really_destroy_it function. Change-Id: Idea0d47b27dd74f2488db75bcc7f353d8fdc614a	10 years ago
Richard Mudgett	8be01398d9	chan_sip.c: Made sip_reinvite_retry() call sip_pvt_lock_full(). ... Change-Id: I90f04208a089f95488a2460185a8dbc3f6acca12	10 years ago
Richard Mudgett	25de01f301	SIP diversion: Fix REDIRECTING(reason) value inconsistencies. ... Previous chan_sip behavior: Before this patch chan_sip would always strip any quotes from an incoming reason and pass that value up as the REDIRECTING(reason). For an outgoing reason value, chan_sip would check the value against known values and quote any it didn't recognize. Incoming 480 response message reason text was just assigned to the REDIRECTING(reason). Previous chan_pjsip behavior: Before this patch chan_pjsip would always pass the incoming reason value up as the REDIRECTING(reason). For an outgoing reason value, chan_pjsip would send the reason value as passed down. With this patch: Both channel drivers match incoming reason values with values documented by REDIRECTING(reason) and values documented by RFC5806 regardless of whether they are quoted or not. RFC5806 values are mapped to the equivalent REDIRECTING(reason) documented value and is set in REDIRECTING(reason). e.g., an incoming RFC5806 'unconditional' value or a quoted string version ('"unconditional"') is converted to REDIRECTING(reason)'s 'cfu' value. The user's dialplan only needs to deal with 'cfu' instead of any of the aliases. The incoming 480 response reason text supported by chan_sip checks for known reason values and if not matched then puts quotes around the reason string and assigns that to REDIRECTING(reason). Both channel drivers send outgoing known REDIRECTING(reason) values as the unquoted RFC5806 equivalent. User custom values are either sent as is or with added quotes if SIP doesn't allow a character within the value as part of a RFC3261 Section 25.1 token. Note that there are still limitations on what characters can be put in a custom user value. e.g., embedding quotes in the middle of the reason string is silly and just going to cause you grief. * Setting a REDIRECTING(reason) value now recognizes RFC5806 aliases. e.g., Setting REDIRECTING(reason) to 'unconditional' is converted to the 'cfu' value. * Added missing malloc() NULL return check in res_pjsip_diversion.c set_redirecting_reason(). * Fixed potential read from a stale pointer in res_pjsip_diversion.c add_diversion_header(). The reason string needed to be copied into the tdata memory pool to ensure that the string would always be available. Otherwise, if the reason string returned by reason_code_to_str() was a user's reason string then the string could be freed later by another thread. Change-Id: Ifba83d23a195a9f64d55b9c681d2e62476b68a87	10 years ago
Richard Mudgett	2dae4a1ccf	chan_sip.c: Fix T.38 issues caused by leaving a bridge. ... chan_sip could not handle AST_T38_TERMINATED frames being sent to it when the channel left the bridge. The action resulted in overlapping outgoing reINVITEs. The testsuite tests/fax/sip/directmedia_reinvite_t38 was not happy. * Force T.38 to be remembered as locally bridged. Now when the channel leaves the native RTP bridge after T.38, the channel remembers that it has already reINVITEed the media back to Asterisk. It just needs to terminate T.38 when the AST_T38_TERMINATED arrives. * Prevent redundant AST_T38_TERMINATED from causing problems. Redundant AST_T38_TERMINATED frames could cause overlapping outgoing reINVITEs if they happen before the T.38 state changes to disabled. Now the T.38 state is set to disabled before the reINVITE is sent. ASTERISK-25582 #close Change-Id: I53f5c6ce7d90b3f322a942af1a9bcab6d967b7ce	10 years ago
zuul	170941990b	Merge "chan_sip: Optionally supply fromuser/fromdomain in SIP dial string."	10 years ago
Richard Mudgett	886ee09471	chan_sip.c: Suppress T.38 SDP c= line if addr is the same. ... Use the correct comparison function since we only care if the address without the port is the same. Change-Id: Ibf6c485f843a1be6dee58a47b33d81a7a8cbe3b0	10 years ago
Walter Doekes	c00082329e	chan_sip: Optionally supply fromuser/fromdomain in SIP dial string. ... Previously you could add [!dnid] to the SIP dial string to alter the To: header. This change allows you to alter the From header as well. SIP dial string extra options now look like this: [![touser[@todomain]][![fromuser][@fromdomain]]] INCOMPATIBLE CHANGE: If you were using an exclamation mark in your To: header, that is no longer possible. ASTERISK-25803 #close Change-Id: I2457e9ba7a89eb1da22084bab5a4d4328e189db7	10 years ago
Richard Mudgett	a877e0d94b	AST-2016-002 chan_sip.c: Fix retransmission timeout integer overflow. ... Setting the sip.conf timert1 value to a value higher than 1245 can cause an integer overflow and result in large retransmit timeout times. These large timeout times hold system file descriptors hostage and can cause the system to run out of file descriptors. NOTE: The default sip.conf timert1 value is 500 which does not expose the vulnerability. * The overflow is now detected and the previous timeout time is calculated. ASTERISK-25397 #close Reported by: Alexander Traud Change-Id: Ia7231f2f415af1cbf90b923e001b9219cff46290	10 years ago
StefanEng86	55a7367ad4	chan_sip.c: AMI & CLI notify methods get different values of asterisk's own ip. ... When I ask asterisk to send a SIP NOTIFY message to a sip peer using either a) AMI action: SIPnotify or b) cli command: sip notify <cmd> <peer>, I expect asterisk to include the same value for its own ip in both cases a) and b), but it seems a) produces a contact header like Contact: <sip:asterisk@192.168.1.227:8060> whereas b) produces a contact header like <sip:asterisk@127.0.0.1:8060>. 0.0.0.0:8060 is my udpbindaddr in sip.conf My guess is that manager_sipnotify should call ast_sip_ouraddrfor(&p->sa, &p->ourip, p) the same way sip_cli_notify does, because after applying this patch, both cases a) and b) produce the contact header that I expect: <sip:asterisk@192.168.1.227:8060> Reported by: Stefan Engström Tested by: Stefan Engström Change-Id: I86af5e209db64aab82c25417de6c768fb645f476	10 years ago
Corey Farrell	830f8933c2	chan_sip: Fix buffer overrun in sip_sipredirect. ... sip_sipredirect uses sscanf to copy up to 256 characters to a stacked buffer of 256 characters. This patch reduces the copy to 255 characters to leave room for the string null terminator. ASTERISK-25722 #close Change-Id: Id6c3a629a609e94153287512c59aa1923e8a03ab	10 years ago
Mark Michelson	53570e2c6f	Merge "chan_sip: option 'notifyringing' change and doc fix"	10 years ago
Ward van Wanrooij	d4b10cfb3e	chan_sip: option 'notifyringing' change and doc fix ... In the sample sip.conf this is written with regard to notifyringing: ;notifyringing = no ; Control whether subscriptions already INUSE get sent RINGING when another call is sent (default: yes) However, this setting changes whether or not any RINGING indications are sent to subscriptions. There is no separate configurable setting that allows to control whether INUSE subscriptions also get sent RINGING. This is however a useful option, to see (using BLF) if somebody else is able to handle an incoming call or if everybody is busy. This patch corrects the documentation for notifyringing (so the documentation matches the functionality) and make notifyringing a tri-state option, by adding the value 'notinuse' (in addition to 'yes' and 'no'). When notifyringing = notinuse, only subscriptions that are not INUSE are sent the RINGING signal. The default setting for notifyringing remains set to yes, so the default behaviour is not affected. ASTERISK-25558 Change-Id: I88f7036ee084bb3f43b74f15612695c6708f74aa	10 years ago
Dade Brandon	6dc21bbf00	chan_sip.c: fix websocket_write_timeout default value ... websocket_write_timeout was not being set to its default value during sip config reload, which meant that prior to this commit, 1) the default value of 100 was not used, unless an invalid value (or 1) was specified in sip.conf for websocket_write_timeout, and 2) if the websocket_write_timeout directive was removed from sip.conf without a full restart of asterisk, then the previous value would continue to be used indefinitely. This essentially lead to a 0ms write timeout (the first write attempt in ast_careful_fwrite must have succeeded) in websocket write requests from chan_sip, unless websocket_write_timeout was explicitely set in sip.conf. Changes to websocket_write_timeout still only apply to new websocket sessions, after the sip reload -- timeouts on existing sessions are not adjusted during sip reload. Change-Id: Ibed3816ed29cc354af6564c5ab3e75eab72cb953	10 years ago
Joshua Colp	d2c8614122	chan_sip: Enable WebSocket support by default. ... Per the documentation the WebSocket support in chan_sip is supposed to be enabled by default but is not. This change corrects that. Change-Id: Icb02bbcad47b11a795c14ce20a9bf29649a54423	10 years ago
Jonathan Rose	ceebdfce40	chan_sip: Add TCP/TLS keepalive to TCP/TLS server ... Adds the TCP Keep Alive option to TCP and TLS server sockets. Previously this option was only being set on session sockets. http://www.tldp.org/HOWTO/html_single/TCP-Keepalive-HOWTO/ According to the link above, the SO_KEEPALIVE option is useful for knowing when a TCP connected endpoint has severed communication without indicating it or has become unreachable for some reason. Without this patch, keep alive is not set on the socket listening for incoming TCP sessions and in Komatsu's report this resulted in the thread listening for TCP becoming stuck in a waiting state. ASTERISK-25364 #close Reported by: Hiroaki Komatsu Change-Id: I7ed7bcfa982b367dc64b4b73fbd962da49b9af36	10 years ago
Matt Jordan	259fa9c901	Merge "chan_sip: Check sip_pvt pointer in ast_channel_get_t38_state(c)"	10 years ago
Eugene Voityuk	be693539c3	chan_sip.c: Start ICE negotiation when response is sent or received. ... The current logic for ICE negotiation starts it when receiving an SDP with ICE candidates. This is incorrect as ICE negotiation can only start when each call party have at least one pair of local and remote candidate. Starting ICE negotiation early would result in negotiation failure and ultimately no audio. This change makes it so ICE negotiation is only started when a response with SDP is received or when a response with SDP is sent. ASTERISK-24146 Change-Id: I55a632bde9e9827871b09141d82747e08379a8ca	10 years ago
Filip Jenicek	59a91c350a	chan_sip: Check sip_pvt pointer in ast_channel_get_t38_state(c) ... Asterisk may crash when calling ast_channel_get_t38_state(c) on a locked channel which is being hung up. ASTERISK-25609 #close Change-Id: Ifaa707c04b865a290ffab719bd2e5c48ff667c7b	10 years ago
Richard Mudgett	65c8147952	chan_sip: Fix crash involving the bogus peer during sip reload. ... A crash happens sometimes when performing a CLI "sip reload". The bogus peer gets refreshed while it is in use by a new call which can cause the crash. * Protected the global bogus peer object with an ao2 global object container. ASTERISK-25610 #close Change-Id: I5b528c742195681abcf713c6e1011ea65354eeed	10 years ago
Christof Lauber	48c065e46d	chan_sip: Support parsing of Q.850 reason header in SIP BYE and CANCEL requests. ... Current support for reason header did work only in SIP responses. According to RFC3336 the reason header might appear in any SIP request. But it seems to make most sence in BYE and CANCEL so parasing is done there too (if use_q850_reason=yes). Change-Id: Ib6be7b34c23a76d0e98dfd0816c89931000ac790	10 years ago
Richard Mudgett	145d10a5d0	Audit improper usage of scheduler exposed by 5c713fdf18. (v13 additions) ... chan_sip.c: * Initialize mwi subscription scheduler ids earlier because of ASTOBJ to ao2 conversion. * Initialize register scheduler ids earlier because of ASTOBJ to ao2 conversion. chan_skinny.c: * Fix more scheduler usage for the valid 0 id value. ASTERISK-25476 Change-Id: If9f0e5d99638b2f9d102d1ebc9c5a14b2d706e95	10 years ago
Richard Mudgett	fa20729032	Audit improper usage of scheduler exposed by 5c713fdf18. ... channels/chan_iax2.c: * Initialize struct chan_iax2_pvt scheduler ids earlier because of iax2_destroy_helper(). channels/chan_sip.c: channels/sip/config_parser.c: * Fix initialization of scheduler id struct members. Some off nominal paths had 0 as a scheduler id to be destroyed when it was never started. chan_skinny.c: * Fix some scheduler id comparisons that excluded the valid 0 id. channel.c: * Fix channel initialization of the video stream scheduler id. pbx_dundi.c: * Fix channel initialization of the packet retransmission scheduler id. ASTERISK-25476 Change-Id: I07a3449f728f671d326a22fcbd071f150ba2e8c8	10 years ago
Steve Davies	d982b99e71	Further fixes to improper usage of scheduler ... When ASTERISK-25449 was closed, a number of scheduler issues mentioned in the comments were missed. These have since beed raised in ASTERISK-25476 and elsewhere. This patch attempts to collect all of the scheduler issues discovered so far and address them sensibly. ASTERISK-25476 #close Change-Id: I87a77d581e2e0d91d33b4b2fbff80f64a566d05b	10 years ago
Alexander Traud	cf79b62778	ast_format_cap_get_names: To display all formats, the buffer was increased. ... ASTERISK-25533 #close Change-Id: Ie1a9d1a6511b3f1a56b93d04475fbf8a4e40010a	10 years ago
Corey Farrell	40574a2ea3	chan_sip: Allow websockets to be disabled. ... This patch adds a new setting "websockets_enabled" to sip.conf. Setting this to false allows chan_sip to be used without causing conflicts with res_pjsip_transport_websocket. ASTERISK-24106 #close Reported by: Andrew Nagy Change-Id: I04fe8c4f2d57b2d7375e0e25826c91a72e93bea7	10 years ago
Alexander Traud	d343a25173	chan_sip: Do not send all codecs on INVITE. ... Since version 13, Asterisk sent all allowed codecs as callee, even when the caller did not request/support them. In case of dynamic RTP payloads, this led to the same ID for different codecs, which is not allowed by SIP/SDP. Now, the intersection between the requested and the supported codecs is send again. ASTERISK-24543 #close Change-Id: Ie90cb8bf893b0895f8d505e77343de3ba152a287	10 years ago
Alexander Traud	f3b2b3d1b3	chan_sip: Fix autoframing=yes. ... With Asterisk 13, the structures ast_format and ast_codec changed. Because of that, the paketization timing (framing) of the RTP channel moved away from the formats/codecs. In the course of that change, the ptime of the callee was not honored anymore, when the optional autoframing was enabled. ASTERISK-25484 #close Change-Id: Ic600ccaa125e705922f89c72212c698215d239b4	10 years ago
Matt Jordan	13229037d1	channels/chan_sip: Set cause code to 44 on RTP timeout ... To quote Olle: "When issuing a hangup due to RTP timeouts the cause code is not set. I have selected 44 based on Cisco's implementation..." ASTERISK-25135 #close Reported by: Olle Johansson patches: rtp-timeout-cause-1.8.diff uploaded by Olle Johansson (License 5267) Change-Id: Ia62100c55077d77901caee0bcae299f8dc7375fc	10 years ago
Matt Jordan	8cb614fe20	Fix improper usage of scheduler exposed by 5c713fdf18 ... When 5c713fdf18 was merged, it allowed for scheduled items to have an ID of '0' returned. While this was valid per the documentation for the API, it was apparently never returned previously. As a result, several users of the scheduler API viewed the result as being invalid, causing them to reschedule already scheduled items or otherwise fail in interesting ways. This patch corrects the users such that they view '0' as valid, and a returned ID of -1 as being invalid. Note that the failing HEP RTCP tests now pass with this patch. These tests failed due to a duplicate scheduling of the RTCP transmissions. ASTERISK-25449 #close Change-Id: I019a9aa8b6997584f66876331675981ac9e07e39	10 years ago
Walter Doekes	e4df271a3e	chan_sip: Fix From header truncation for extremely long CALLERID(name). ... The CALLERID(num) and CALLERID(name) and other info are placed into the `char from[256]` in initreqprep. If the name was too long, the addr-spec and params wouldn't fit. Code is moved around so the addr-spec with params is placed there first, and then fitting in as much of the display-name as possible. ASTERISK-25396 #close Change-Id: I33632baf024f01b6a00f8c7f35c91e5f68c40260	10 years ago
Matt Jordan	b1f9c998ed	Merge "chan_sip.c: Validation on module reload"	10 years ago