Fix data-type mismatch between app_voicemail and database columns
exposed by new version of MariaDB
ASTERISK-27760
Change-Id: I8543ad480a08c98be78bde1ee870e6e6c84b2c5b
Correct the log warning message shown when ODBC voicemail
retrieve_file is called and there is a null value in the category
column.
A more meaningfull message is now written at debug level.
ASTERISK-27853
Change-Id: Ic36e97d5eb070a23a12ba45972f6b53e2182a3f4
This fixes build warnings found by GCC 8. In some cases format
truncation is intentional so the warning is just suppressed.
ASTERISK-27824 #close
Change-Id: I724f146cbddba8b86619d4c4a9931ee877995c84
Use AST_PBX_MAX_STACK to escape if we recurse 128 times. This will
prevent crash if dialplan contains an include loop. Log an error when
this occurs, at most one message per call to Macro() so we avoid logger
spam.
ASTERISK-26570 #close
Change-Id: I6c71b76998c31434391b150de055ae9a531e31da
Fixes a bug on the "confbridge show profile bridge" cli command
that showed "video_mode=no video" when video_mode was set
to "sfu"
ASTERISK-27418 #close
Change-Id: I481e3172c7f872664c7ac7809879d541c9f031e9
This change adds the ability for multiple REMB reports in
bridge_softmix to be combined according to a configured
behavior into a single report. This single report is sent
back to the sender of video, which adjusts the encoding bitrate
to be at or below the bitrate of the report. The available
behaviors are: lowest, highest, and average. Lowest uses the
lowest received bitrate. Highest uses the highest received
bitrate. Average goes through the received bitrates adding
them to the previous average and creates a new average.
Other behaviors can be added in the future and the existing
average one may be adjusted, but this provides the foundation
to do so.
Support for configuring which behavior to use has been
added to app_confbridge.
ASTERISK-27804
Change-Id: I9eafe4e7c1f72d67074a8d6acb26bfcf19322b66
SendText now accepts new channel variables that can be used
to override the To and From display names and set the Content-Type
of a message. Since you can now set Content-Type, other text/*
content types are now valid.
Change-Id: I648b4574478119f95de09d9f08e9595831b02830
This change adds a configuration option to app_confbridge which can be
used to set the interval at which we will send a combined REMB (remote
estimated maximum bitrate) frame to sources of video. The bridging API
has also been extended slightly to allow setting this so bridge_softmix
can use it.
ASTERISK-27786
Change-Id: I0e49eae60f369c86434414f3cb8278709c793c82
Add an option to make app_originate not wait for the created channel
to answer.
Change-Id: I7fc2facd77079abc6321f44e8bcd4e39298de2ae
Requested-by: Frederic Steinfels <fst@highdefinition.ch>
Signed-off-by: Russell Bryant <russell@russellbryant.net>
Asterisk does not need the development package of libltdl, because it does not
use any symbol of -lltdl directly. Instead, it uses the runtime package via the
shared library -lodbc. On the supported platforms, that shared library declares
its dependency on -lltdl correctly, otherwise AST_EXT_LIB_CHECK would have
failed.
ASTERISK-27745
Change-Id: Icd315809b8e7978203431f3afb66240dd3a040ba
Certain applications (e.g. door-phone) require that also video is transmitted
before a call is accepted.
Change-Id: I9842e1dc2f6e1c2c49dc33fe615255007d2f821e
When app_voicemail calls ast_test_suite_notify with the results of
a user keypress, it formats the keypress as '%c'. If the user hung up
or some other error occurrs, the result of the keypress is a non
printable character. This ultimately causes json_vpack_ex to think
it's being passed a non utf-8 string and return an error.
* Keypress results passed to ast_test_suite_notify are now checked with
isprint() and a '?' is substituted if the check fails.
Change-Id: I78ee188916bbac840f3d03f40201b692347ea865
* acl (named_acl.c)
* cdr
* cel
* ccss
* dnsmgr
* dsp
* enum
* extconfig (config.c)
* features
* http
* indications
* logger
* manager
* plc
* sounds
* udptl
These modules are now loaded at appropriate time by the module loader.
Unlike loadable modules these use AST_MODULE_LOAD_FAILURE on error so
the module loader will abort startup on failure of these modules.
Some of these modules are still initialized or shutdown from outside the
module loader. logger.c is initialized very early and shutdown very
late, manager.c is initialized by the module loader but is shutdown by
the Asterisk core (too much uses it without holding references).
Change-Id: I371a9a45064f20026c492623ea8062d02a1ab97f
The menuselect comment was updated to deprecate these modules but the
AST_MODULE_INFO block at the end of file was missed.
ASTERISK-27671
Change-Id: I63070b5c4d4f08af010c6034acd4793c1bcef839
Checking option_debug directly is incorrect as it ignores file/module
specific debug settings. This system-wide change replaces nearly all
direct checks for option_debug with the DEBUG_ATLEAST macro.
Change-Id: Ic342d4799a945dbc40ac085ac142681094a4ebf0
astosp.h is leftover from when logic was split between app_osplookup and
res_osp. All logic was moved into app_osplookup by 109737eb1c in 2006,
but astosp.h remained. This moves the remaining defines into
app_osplookup and deletes astosp.h.
Change-Id: I0a6c4debd7c9543b608520b1765abfa4fab7b2fd
Between Asterisk 11 and Asterisk 13 there was a significant increase
in the number of AST_FRAME_NULL frames being processed by app_amd.c's
main loop. Each AST_FRAME_NULL frame was being counted as 100ms
towards the total time and silence. This may have been accurate
when app_amd.c was orginally added, but it is not in Asterisk 13.
As such the total analysis time and silence calculations were way
off effectively breaking app_amd.c
* Additional debug messages were added
* AST_FRAME_NULL are now ignored
ASTERISK-27610
Change-Id: I18aca01af98f87c1e168e6ae0d85c136d1df5ea9
* app_fax (replaced by res_fax).
* res_config_sqlite (replaced by res_config_sqlite3).
* res_monitor (replaced by app_mixmonitor).
This is related to ASTERISK~23657 but does not resolve that ticket.
Resolving that ticket would require complete removal of res_monitor.
ASTERISK-27671 #close
Change-Id: I16a3edd61fc1abd4a7b2e9357693ed663f62dd49
* Made the AMI ConfbridgeList action's ConfbridgeList events output all
the standard channel snapshot headers instead of a few hand-coded channel
snapshot headers. The benefit is that the CallerIDName gets disruptive
characters like CR, LF, Tab, and a few others escaped. However, an empty
CallerIDName is now output as "<unknown>" instead of "<no name>".
ASTERISK-27651
Change-Id: Iaf7d54a9d40194c2db060bc9b4979fab6720d977
The dsp_talking_threshold does not represent time in milliseconds. It
represents the average magnitude per sample in the audio packets. This is
what the DSP uses to determine if a packet is silence or talking/noise.
Change-Id: If6f939c100eb92a5ac6c21236559018eeaf58443
This removes references that are no longer needed due to automatic
references created by module dependencies.
In addition this removes most calls to ast_module_check as they were
checking modules which are listed as dependencies.
Change-Id: I332a6e8383d4c72c8e89d988a184ab8320c4872e
I've audited all modules that include any header which includes
asterisk/optional_api.h. All modules which use OPTIONAL_API now declare
those dependencies in AST_MODULE_INFO using requires or optional_modules
as appropriate.
In addition ARI dependency declarations have been reworked. Instead of
declaring additional required modules in res/ari/resource_*.c we now add
them to an optional array "requiresModules" in api-docs for each module.
This allows the AST_MODULE_INFO dependencies to include those missing
modules.
Change-Id: Ia0c70571f5566784f63605e78e1ceccb4f79c606
This patch adds the ability to configure a prompt which will be read
to the "winner" who pressed 1 (or the configured value) and received
the call.
ASTERISK-24372 #close
Change-Id: I6ec1c6c883347f7d1e1f597189544993c8d65272
* Declare 'requires' and 'enhances' text fields on module info structure.
* Rename 'nonoptreq' to 'optional_modules'.
* Update doxygen comments.
Still need to investigate dependencies among modules I cannot compile.
Change-Id: I3ad9547a0a6442409ff4e352a6d897bef2cc04bf
The check for last_user == NULL needs to happen before we dereference
the variable, previously it was possible for us to check flags of a NULL
last_user.
Change-Id: I274f737aa8af9d2d53e4a78cdd7ad57561003945
Fix instances of:
* Retreive
* Recieve
* other then
* different then
* Repeated words ("the the", "an an", "and and", etc).
* othterwise, teh
ASTERISK-24198 #close
Change-Id: I3809a9c113b92fd9d0d9f9bac98e9c66dc8b2d31
* mwi_sub_event_cb: mwist leaked on separate_mailbox failure.
* add_email_attachment: A reference to sox_gain_tmpdir was used
after the storage was out of scope.
Change-Id: I6282c542ff7b82fa091177a912d11234a8b00a30
This patch adds the ability to set the wrapuptime on the queue member
config.
When the option is set the wrapuptime on the queue member is used instead
of the queue's wrapuptime.
ASTERISK-27483 #close
Change-Id: I11c85809537f974eb44dc5bbf82bcedd8a458902
The Local channel has never supported app_transfer
from what I can see so remove it from the documentation.
ASTERISK-25649
Change-Id: Icbcfe297f6f866285a26b3e9fd5c6d00fa22e0e9
Remove nearly all use of regex from ACO users. Still remaining:
* app_confbridge has a legitamate use of option name regex.
* ast_sorcery_object_fields_register is implemented with regex, all
callers use simple prefix based regex. I haven't decided the best
way to fix this in both 13/15 and master.
Change-Id: Ib5ed478218d8a661ace4d2eaaea98b59a897974b
Currently, to figure out specified voicemail's status, there's only one
way to do it, which is use a VoicemailUserEntry AMI message.
But it consumed it too much resource(it check everything).
So, added new AMI action.
ASTERISK-27470
Change-Id: Ie4eba1424a142e5fbd1d9fb1821a3fc1a1e238b7
The approach with having a single global subscription to all extension
state changes has one issue: dynamically created hints don't have any
watchers and are therefore garbage collected on the first dialplan
reload.
This change creates a state subscription for every queue member with a
hint as state_interface, thus increasing the count of watches for
hints, so they are not destroyed prematurely anymore.
There are 2 side effects:
1. The state change callback in app_queue is not executed when
there are no members referring to the extension.
2. The callback is called multiple times for the same hint if it's
associated with more than one queue member.
Reported by: Steven T. Wheeler
ASTERISK-18411 #close
Change-Id: I4956af2136ea2a7f110ac9272eae5f6e676d8f89
There are many places in the code base where we ignore the return value
of fcntl() when getting/setting file descriptior flags. This patch
introduces a convenience function that allows setting or clearing file
descriptor flags and will also log an error on failure for later
analysis.
Change-Id: I8b81901e1b1bd537ca632567cdb408931c6eded7
Currently, when the app_voicemail sending VoicemailUserEntry AMI event, there's
no OldMessageCount info for default.
To check the OldMessageCount info, it required IMAP_STORAGE define, but this is
not correct.
Added OldMessageCount item as a default.
ASTERISK-27456
Change-Id: I5c71521c2d1daf8b7b161e31c34d28cca6aea4c7
Instead of specifying AST_MODFLAG_LOAD_ORDER with load_pri
AST_MODPRI_DEFAULT just use AST_MODFLAG_DEFAULT.
Change-Id: I0123258eafce324249433a69df15a85cc16e509f
Declare 'res' initialized to -1 to deal with earlier error paths that
could cause 'res' to be returned uninitialized.
Change-Id: I8ac2a5755bf4174d89ef893e924c940f702b104e
We've been calling pbx_builtin_setvar_helper to set the
RECORD_STATUS variable before actually closing the recorded file.
If a client is watching VarSet events and tries to do something with
the file when a RECORD_STATUS event is seen, they might attempt to
do so while the file it's still open.
We now delay calling pbx_builtin_setvar_helper until after we close
the file.
ASTERISK-27423
Change-Id: I7fe9de99953e46b4bafa2b38cf151fe8f6488254
When (v)asprintf() fails, the state of the allocated buffer is undefined.
The library had better not leave an allocated buffer as a result or no one
will know to free it. The most likely way it can return failure is for an
allocation failure. If the printf conversion fails then you actually have
a threading problem which is much worse because another thread modified
the parameter values.
* Made __ast_asprintf()/__ast_vasprintf() set the returned buffer to NULL
on failure. That is much more useful than either an uninitialized pointer
or a pointer that has already been freed. Many uses won't have to check
for failure to ensure that the buffer won't be double freed or prevent an
attempt to free an uninitialized pointer.
* stasis.c: Fixed memory leak in multi_object_blob_to_ami() allocated by
ast_asprintf().
* ari/resource_bridges.c:ari_bridges_play_helper(): Remove assignment to
the wrong thing which is now not needed even if assigning to the right
thing.
Change-Id: Ib5252fb8850ecf0f78ed0ee2ca0796bda7e91c23
* Stop using ast_module_helper to check if a module is loaded, use
ast_module_check instead (app_confbridge and app_meetme).
* Stop ast_module_helper from listing reload classes when needsreload
was not requested.
ASTERISK-27378
Change-Id: Iaed8c1e4fcbeb242921dbac7929a0fe75ff4b239
Fix typo, that specify usage wrong option 'dtmf-features' for CHANNEL() function
instead of correct 'dtmf_features'
ASTERISK-27377 #close
Change-Id: I15ecc829c1035b359584673e12cdb5c9291ac930
* Mark the module deprecated.
* Disable the module by default.
* Produce a warning the first time a macro is used.
* Note deprecation related options in app_dial and app_queue.
ASTERISK-27350
Change-Id: I560ea043bacdbc5534a17d97854273d52c2f1bdc
We were ignoring the return value from ast_pbx_outgoing_exten() and
ast_pbx_outgoing_app() which could fail before setting the reason code.
This resulted in failures being reported as success.
ASTERISK-25266 #close
Reported by: Allen Ford
Change-Id: Idf16237b7e41b527d2c69c865829128686beeb3b
The previous patch for ASTERISK-27216 made it so you wouldn't get any
position or periodic announcements unless you had announce-to-first-user
enabled. The announce-to-first-user feature was added by ASTERISK_21782
as a result of the patch which introduced the redundant announcements that
ASTERISK-27216 removes.
* By noting that the makeannouncement variable is used to suppresses the
first user announcement, we set its initial value to the
announce-to-first-user enable setting.
ASTERISK-27216
Change-Id: Ieaeb7dbea8ae7073086b775fbafe0625b000b10a
This patch reverts the change by patch 2263 from old reviewboard.
Note that reverting that 2263-patch still preserves the behaviour that
the commit log of the 2263-patch claimed to add. The reason for this is:
The function wait_for_answer is only called from try_calling which
in turn is only called from the main for loop in queue_exec, and
earlier in that loop we already check the things that's removed by
this patch. There's no need to check those things twice each loop
iteration, and I think the proper place to check it is before each
ringing cycle. By checking it in wait_for_answer, you allow the issue
explained in the jira - that the head caller hears announcements while
the agents' sip phones are actively ringing.
Reported-by: Stefan Engström
Tested-by: Stefan Engström
ASTERISK-27216 #close
Change-Id: Ic4290dc75256f9743900c6762ee1bb915f672db0
Discovered while experimenting with Cyber Mega Phone 2K Ultimate Dynamic
Edition after accepting the audio request but declining the video one.
Change-Id: Iaa86d41fccfbc1b559a30ccf740d78a3b5f8a98c
This change makes it so that the conference recorder channel
that is created only contains audio formats and an audio stream.
This is because the underlying application used by ConfBridge to
record, MixMonitor, only allows recording audio.
Having additional streams (and in particular a video stream) can
result in clients needlessly renegotiating to add a video stream
that will never receive video.
Change-Id: I89d38aedc9205eca7741d5435e73e73bb9de97a0
* WaitForSilence completes successfully if it receives no media in the
specified timeout, but when acting as WaitForNoise that logic needs
to be reversed.
* Use standard argument parsing macros and add some error checking for
invalid values.
* The documentation indicated that the first argument to both
WaitForSilence and WaitForNoise was required when it was not. Update
the documentation to reflect that.
* Wrap up some behavior in structs to avoid boolean checks all over the
place.
ASTERISK-24066 #close
Reported by: M vd S
Change-Id: I01d40adc5b63342bb5018a1bea2081a0aa191ef9
An admin can configure app_minivm with an externnotify program to be run
when a voicemail is received. The app_minivm application MinivmNotify
uses ast_safe_system() for this purpose which is vulnerable to command
injection since the Caller-ID name and number values given to externnotify
can come from an external untrusted source.
* Add ast_safe_execvp() function. This gives modules the ability to run
external commands with greater safety compared to ast_safe_system().
Specifically when some parameters are filled by untrusted sources the new
function does not allow malicious input to break argument encoding. This
may be of particular concern where CALLERID(name) or CALLERID(num) may be
used as a parameter to a script run by ast_safe_system() which could
potentially allow arbitrary command execution.
* Changed app_minivm.c:run_externnotify() to use the new ast_safe_execvp()
instead of ast_safe_system() to avoid command injection.
* Document code injection potential from untrusted data sources for other
shell commands that are under user control.
ASTERISK-27103
Change-Id: I7552472247a84cde24e1358aaf64af160107aef1
This prevents orphaned CBAnn channels from getting stuck in the bridge.
ASTERISK-26994 #close
Reported by: James Terhune
Change-Id: I5e43e832a9507ec3f2c59752cd900b41dab80457
mkstemp() returns a unique filename, but appending an extension to that
filename does not guarantee uniqueness. Instead, use mkdtemp() and we
can put whatever extension we want on the files that we create inside
the directory.
In the case of app_minivm, we also now properly clean up any temporary
files that we create.
ASTERISK-20858 #close
Reported by: Walter Doekes
Change-Id: I30ad04f0e115f0b11693ff678ba5184d8b938e43
If the Record() application is called with a relative filename that
includes directories, we were not properly creating the intermediate
directories and Record() would fail.
Secondarily, updated the documentation for RECORDED_FILE to mention
that it does not include a filename extension.
Finally, rewrote the '%d' functionality to be a bit more straight
forward and less noisy.
ASTERISK-16777 #close
Reported by: klaus3000
Change-Id: Ibc2640cba3a8c7f17d97b02f76b7608b1e7ffde2
Joshua Colp
Rodrigo Ramírez Norambuena
Nic Colledge
Corey Farrell
George Joseph
Chris-Savinovich
Richard Mudgett
Russell Bryant
Jenkins2
Alexander Traud
Florian Floimair
Kevin Harwell
Sungtae Kim
Michael Cargile
ghjm
Sean Bright
Ivan Poddubny
Igor Goncharovskiy
Nathan Bruning
StefanEng86