The dsp_talking_threshold does not represent time in milliseconds. It
represents the average magnitude per sample in the audio packets. This is
what the DSP uses to determine if a packet is silence or talking/noise.
Change-Id: If6f939c100eb92a5ac6c21236559018eeaf58443
The sample modules.conf explicitly loaded res_musiconhold.so. This is
redundent as autoload=yes is already set. It causes warnings if
res_musiconhold.so was not installed and results in an unexpected load
if the admin disables autoload without remembering to remove the
res_musiconhold load statement.
Also remove reference to unknown module pbx_gtkconsole.
Change-Id: Ib01888994d9f1364b14d3c9fb6ff96774a6e580a
This patch adds the ability to configure a prompt which will be read
to the "winner" who pressed 1 (or the configured value) and received
the call.
ASTERISK-24372 #close
Change-Id: I6ec1c6c883347f7d1e1f597189544993c8d65272
The type=identify endpoint identification method can match by IP address
and by SIP header. However, the SIP header matching has limited
usefulness because you cannot specify the SIP header matching priority
relative to the IP address matching. All the matching happens at the same
priority and the order of evaluating the identify sections is
indeterminate. e.g., If you had two type=identify sections where one
matches by IP address for endpoint alice and the other matches by SIP
header for endpoint bob then you couldn't predict which endpoint is
matched when a request comes in that matches both.
* Extract the SIP header matching criteria into its own "header" endpoint
identification method so the user can specify the relative priority of the
SIP header and the IP address matching criteria in the global
endpoint_identifier_order option. The "ip" endpoint identification method
now only matches by IP address.
ASTERISK-27491
Change-Id: I9df142a575b7e1e3471b7cda5d3ea156cef08095
This patch adds the ability to set the wrapuptime on the queue member
config.
When the option is set the wrapuptime on the queue member is used instead
of the queue's wrapuptime.
ASTERISK-27483 #close
Change-Id: I11c85809537f974eb44dc5bbf82bcedd8a458902
The mute/unmute sounds are only played when the
action is initiated using the DTMF menu.
ASTERISK-24756
Change-Id: I55b3dd5bc166096bf5e2f547ddd0ce355f36e3dc
We should not do flood detection on video RTP streams. Video RTP streams
are very bursty by nature. They send out a burst of packets to update the
video frame then wait for the next video frame update. Really only audio
streams can be checked for flooding. The others are either bursty or
don't have a set rate.
* Added code to selectively disable packet flood detection for video RTP
streams.
ASTERISK-27440
Change-Id: I78031491a6e75c2d4b1e9c2462dc498fe9880a70
This no longer appears to exist, so no sense in causing confusion.
ASTERISK-27175 #close
Reported by: Tzafrir Cohen
Change-Id: Idde967924c69f6a741dc9a5ab7dacb44d22cf100
With Asterisk 12 (commit 866d968), the default of "icesupport" changed to
- "yes" in the module "res_rtp_asterisk" and
- "no" in the module "chan_sip".
The latter was reflected in the sample configuration file for "sip.conf". The
former did not make it into "rtp.conf.sample".
ASTERISK-20643
Change-Id: I2a2e0a900455d0767a99ea576e30adc6d7608a36
Beanstalkd is a simple to use job queue. It provides a means to
create multiple job queues called "tubes". Each tube can store
multiple jobs, with varying priorities with the queue. Queue
processing is available via a simple TCP socket or via well defined
libraries, avaialble at
https://github.com/kr/beanstalkd/wiki/client-libraries
This module is based upon the beanstalk-client library, available
for download at: https://github.com/deepfryed/beanstalk-client
This module currently doesn't support user defined events.
Change-Id: Ic3a087faeeac045d69a2a018e60e29831ddb95ab
The OUTPUTDIR environment variable can now be set either in the
environment itself or in ast_debug_tools.conf. If set, it's used
for all work products instead of /tmp.
Also added the --tarball-config option that includes the contents
of /etc/asterisk when either --tarball-coredumps or --tarball-results
are used.
Change-Id: I66b2553319df61caea5b313d084f51978f730b4c
The media frame cache gets in the way of finding use after free errors of
media frames. Tools like valgrind and MALLOC_DEBUG don't know when a
frame is released because it gets put into the cache instead of being
freed.
* Added the "cache_media_frames" option to asterisk.conf. Disabling the
option helps track down media frame mismanagement when using valgrind or
MALLOC_DEBUG. The cache gets in the way of determining if the frame is
used after free and who freed it. NOTE: This option has no effect when
Asterisk is compiled with the LOW_MEMORY compile time option enabled
because the cache code does not exist.
To disable the media frame cache simply disable the cache_media_frames
option in asterisk.conf and restart Asterisk.
Sample asterisk.conf setting:
[options]
cache_media_frames=no
ASTERISK-27413
Change-Id: I0ab2ce0f4547cccf2eb214901835c2d951b78c00
This mimics the behavior of Chrome and Firefox and creates an ephemeral
X.509 certificate for each DTLS session.
Currently, the only supported key type is ECDSA because of its faster
generation time, but other key types can be added in the future as
necessary.
ASTERISK-27395
Change-Id: I5122e5f4b83c6320cc17407a187fcf491daf30b4
When the identify_by option on an endpoint is set to ip it will
only be identified using the res_pjsip_endpoint_identifier_ip module.
This ensures that it is not mistakenly matched using the username of
the From header. To ensure behavior has not changed the default has
been changed to "username,ip" for the identify_by option.
ASTERISK-27206
Change-Id: I2170b86a7f7e221b4f00bf14aa1ef1ac5b050bbd
Beanstalkd is a simple to use job queue. It provides a means to
create multiple job queues called "tubes". Each tube can store
multiple jobs, with varying priorities with the queue. Queue
processing is available via a simple TCP socket or via well defined
libraries, avaialble at
https://github.com/kr/beanstalkd/wiki/client-libraries
This module is based upon the beanstalk-client library, available
for download at: https://github.com/deepfryed/beanstalk-client
Change-Id: I5fe4089a34ab3b39230786d9bbfddafa56715f48
When "rewrite_contact" is enabled, the "max_contacts" count option can
block re-registrations because the source port from the endpoint can be
random. When the re-registration is blocked, the endpoint may give up
re-registering and require manual intervention.
* The "remove_existing" option now allows a registration to succeed by
displacing any existing contacts that now exceed the "max_contacts" count.
Any removed contacts are the next to expire. The behaviour change is
beneficial when "rewrite_contact" is enabled and "max_contacts" is greater
than one. The removed contact is likely the old contact created by
"rewrite_contact" that the device is refreshing.
ASTERISK-27192
Change-Id: I64c107a10b70db1697d17136051ae6bf22b5314b
Incoming requests with non sip(s) URIs in the Request, To, From
or Contact URIs are now rejected with
PJSIP_SC_UNSUPPORTED_URI_SCHEME (416). This is performed in
pjsip_message_filter (formerly pjsip_message_ip_updater) and is
done at pjproject's "TRANSPORT" layer before a request can even
reach the distributor.
URIs read by res_pjsip_outbound_publish from pjsip.conf are now
also checked for both length and sip(s) scheme. Those URIs read
by outbound registration and aor were already being checked for
scheme but their error messages needed to be updated to include
scheme failure as well as length failure.
Change-Id: Ibb2f9f1d2dc7549da562af4cbd9156c44ffdd460
A new endpoint parameter "incoming_mwi_mailbox" allows Asterisk to
receive unsolicited MWI NOTIFY requests and make them available to
other modules via the stasis message bus.
res_pjsip_pubsub has a new handler "pubsub_on_rx_mwi_notify_request"
that parses a simple-message-summary body and, if
endpoint->incoming_mwi_account is set, calls ast_publish_mwi_state
with the voice-message counts from the message.
Change-Id: I08bae3d16e77af48fcccc2c936acce8fc0ef0f3c
An admin can configure app_minivm with an externnotify program to be run
when a voicemail is received. The app_minivm application MinivmNotify
uses ast_safe_system() for this purpose which is vulnerable to command
injection since the Caller-ID name and number values given to externnotify
can come from an external untrusted source.
* Add ast_safe_execvp() function. This gives modules the ability to run
external commands with greater safety compared to ast_safe_system().
Specifically when some parameters are filled by untrusted sources the new
function does not allow malicious input to break argument encoding. This
may be of particular concern where CALLERID(name) or CALLERID(num) may be
used as a parameter to a script run by ast_safe_system() which could
potentially allow arbitrary command execution.
* Changed app_minivm.c:run_externnotify() to use the new ast_safe_execvp()
instead of ast_safe_system() to avoid command injection.
* Document code injection potential from untrusted data sources for other
shell commands that are under user control.
ASTERISK-27103
Change-Id: I7552472247a84cde24e1358aaf64af160107aef1
Add ability to use tokens instead of passwords according to Google OAuth 2.0
protocol.
ASTERISK-27169
Reported by: Andrey Egorov
Tested by: Andrey Egorov
Change-Id: I07f7052a502457ab55010a4d3686653b60f4c8db
Setting this option will cause the Queue application to only announce
the caller's position if it has improved since the last time that we
announced it.
Change-Id: I173a124121422209485b043e2bf784f54242fce6
This change does a few things to improve packet loss and renegotiation:
1. On outgoing RTP streams we will now properly reflect out of order
packets and packet loss in the sequence number. This allows the
remote jitterbuffer to better reorder things.
2. Video updates can now be discarded for a period of time
after one has been sent to prevent flooding of clients.
3. For declined and removed streams we will now release any
media session resources associated with them. This was not
previously done and caused an issue where old state was being
used for a new stream.
4. RTP bundling was not actually removing bundled RTP instances
from the parent. This has been resolved by removing based on
the RTP instance itself and not the SSRC.
5. The code did not properly handle explicitly unbundling an
RTP instance from its parent. This now works as expected.
ASTERISK-27143
Change-Id: Ibd91362f0e4990b6129638e712bc8adf0899fd45
This patch creates a new configuration option called "webrtc". When enabled it
defaults and enables the following options that are needed in order for webrtc
to work in Asterisk:
rtcp-mux, use_avpf, ice_support, and use_received_transport=enabled
media_encryption=dtls
dtls_verify=fingerprint
dtls_setup=actpass
When "webrtc" is enabled, this patch also parses the "msid" media level
attribute from an SDP. It will also appropriately add it onto the outgoing
session when applicable.
Lastly, when "webrtc" is enabled h264 RTCP FIR feedback frames are now sent.
ASTERISK-27119 #close
Change-Id: I5ec02e07c5d5b9ad86a34fdf31bf2f9da9aac6fd
This adds support for parsing timelen values from config files. This
includes support for all flags which apply to PARSE_INT32. Support for
this parser is added to ACO via the OPT_TIMELEN_T option type.
Fixes an issue where extra characters provided to ast_app_parse_timelen
were ignored, they now cause an error.
Testing is included.
ASTERISK-27117 #close
Change-Id: I6b333feca7e3f83b4ef5bf2636fc0fd613742554
By default, when res_musiconhold reloads or unloads, it sends a HUP
signal to custom applications (and all descendants), waits 100ms,
then sends a TERM signal, waits 100ms, then finally sends a KILL
signal. An application which is interacting with an external
device and/or spawns children of its own may not be able to exit
cleanly in the default times, expecially if sent a KILL signal, or
if it's children are getting signals directly from
res_musiconhoild.
* To allow extra time, the 'kill_escalation_delay'
class option can be used to set the number of milliseconds
res_musiconhold waits before escalating kill signals, with the
default being the current 100ms.
* To control to whom the signals are sent, the "kill_method" class
option can be set to "process_group" (the default, existing
behavior), which sends signals to the application and its
descendants directly, or "process" which sends signals only to the
application itself.
Change-Id: Iff70a1a9405685a9021a68416830c0db5158603b
When connected_line_method is "invite", we're supposed to determine
if the client can support UPDATE and if it can, send UPDATE instead
of INVITE to avoid the SDP renegotiation. Not only was pjproject
not setting the PJSIP_INV_SUPPORT_UPDATE flag, we were testing
that invite_tsx wasn't NULL which isn't always the case.
* Updated chan_pjsip/update_connected_line_information to drop the
requirement that invite_tsx isn't NULL.
* Submitted patch to pjproject sip_inv.c that sets the
PJSIP_INV_SUPPORT_UPDATE flag correctly.
* Updated pjsip.conf.sample to clarify what happens when "invite"
is specified.
ASTERISK-27095
Change-Id: Ic2381b3567b8052c616d96fbe79564c530e81560
The stream topology (list of streams and order) is now stored with the
configured PJSIP endpoints and used during the negotiation process.
Media negotiation state information has been changed to be stored
in a separate object. Two of these objects exist at any one time
on a session. The active media state information is what was previously
negotiated and the pending media state information is what the
media state will become if negotiation succeeds. Streams and other
state information is stored in this object using the index (or
position) of each individual stream for easy lookup.
The ability for a media type handler to specify a callback for
writing has been added as well as the ability to add file
descriptors with a callback which is invoked when data is available
to be read on them. This allows media logic to live outside of
the chan_pjsip module.
Direct media has been changed so that only the first audio and
video stream are directly connected. In the future once the RTP
engine glue API has been updated to know about streams each individual
stream can be directly connected as appropriate.
Media negotiation itself will currently answer all the provided streams
on an offer within configured limits and on an offer will use the
topology created as a result of the disallow/allow codec lines.
If a stream has been removed or declined we will now mark it as such
within the resulting SDP.
Applications can now also request that the stream topology change.
If we are told to do so we will limit any provided formats to the ones
configured on the endpoint and send a re-invite with the new topology.
Two new configuration options have also been added to PJSIP endpoints:
max_audio_streams: determines the maximum number of audio streams to
offer/accept from an endpoint. Defaults to 1.
max_video_streams: determines the maximum number of video streams to
offer/accept from an endpoint. Defaults to 1.
ASTERISK-27076
Change-Id: I8afd8dd2eb538806a39b887af0abd046266e14c7
A new global option "imap_poll_logout" was added to specify whether need to
disconnect from the IMAP server after polling of mailboxes.
ASTERISK-27068 #close
Closing IMAP connection after loading mailbox from voicemail.conf
ASTERISK-24052 #close
Change-Id: Ib7558ba04516240a32b65f42e9be64372a0ae12a
This option was added to control whether to notify dialog-info state
'early' or 'confirmed' on Ringing when already INUSE.
The value "yes" is useful for some SIP phones (Cisco SPA)
to be able to indicate and pick up ringing devices.
ASTERISK-26919 #close
Change-Id: Ie050bc30023543c7dfb4365c5be3ce58c738c711
Additional variable to work alongside QUEUE_MAX_PENALTY and QUEUE_MIN_PENALTY,
including an extra parameter in queuerules.conf. This value causes lower
Agent penalty values to "raise up" so that they can join higher penalty agents
and be treated equally after a period of time.
ASTERISK-26995 #close
Change-Id: If1c6421a983667a5ac4c359f6dac25b212b4c459
This option was added to turn off notifying the progress details
on Blind Transfer. If this option is not set then the chan_pjsip
will send NOTIFY "200 OK" immediately after "202 Accepted".
Some SIP phones like Mitel/Aastra or Snom keep the line busy until
receive "200 OK".
ASTERISK-26333 #close
Change-Id: Id606fbff2e02e967c02138457badc399144720f2
This change adds the required logic to allow the SIP
Call-ID to be placed into the HEP RTCP traffic if the
chan_sip module is used. In cases where the option is
enabled but the channel is not either SIP or PJSIP then
the code will fallback to the channel name as done
previously.
Based on the change on Nir's branch at:
team/nirs/hep-chan-sip-support
ASTERISK-26427
Change-Id: I09ffa5f6e2fdfd99ee999650ba4e0a7aad6dc40d
All log messages go to a queue serviced by a single thread
which does all the IO. This setting controls how big that
queue can get (and therefore how much memory is allocated)
before new messages are discarded. The default is 1000.
Should something go bezerk and log tons of messages in a tight
loop, this will prevent memory escalation.
When the limit is reached, a WARNING is logged to that effect
and messages are discarded until the queue is empty again. At
that time another WARNING will be logged with the count of
discarded messages. There's no "low water mark" for this queue
because the logger thread empties the entire queue and processes it
in 1 batch before going back and waiting on the queue again.
Implementing a low water mark would mean additional locking as
the thread processes each message and it's not worth it.
A "test" was added to test_logger.c but since the outcome is
non-deterministic, it's really just a cli command, not a unit
test.
Change-Id: Ib4520c95e1ca5325dbf584c7989ce391649836d1
Added the stun_blacklist option to rtp.conf. Some multihomed servers have
IP interfaces that cannot reach the STUN server specified by stunaddr.
Blacklist those interface subnets from trying to send a STUN packet to
find the external IP address. Attempting to send the STUN packet
needlessly delays processing incoming and outgoing SIP INVITEs because we
will wait for a response that can never come until we give up on the
response. Multiple subnets may be listed.
ASTERISK-26890 #close
Change-Id: I3ff4f729e787f00c3e6e670fe6435acce38be342
This include was accidentally removed in changeset
Ia79aea64de89531362e993e34230c2044a70aa93. My bad.
Change-Id: I1d716c7f9590b4e97909fb8bca1f2ed9bd0e4082
This change adds database tables for the PUBLISH support so it
can be configured using realtime. A minor fix to the
res_pjsip_publish_asterisk module was done so that it read the
sorcery configuration from the correct section. Finally the
sample configuration files have been updated.
ASTERISK-26928
Change-Id: I81991ae5c75af98d247f7eacd1c0b0a763675952
Two new parameters have been added to the pjsip config wizard.
* Setting 'sends_line_with_registrations' to true will cause the wizard
to skip the creation of an identify object to match incoming request
to the endpoint and instead add the line and endpoint parameters to
the outbound registration object.
* Setting 'outbound_proxy' is a shortcut for adding individual
endpoint/outbound_proxy, aor/outbound_proxy and
registration/outbound_proxy parameters.
Change-Id: I678e5f80765734c056620528a6d40d82736ceeb0
(cherry picked from commit a827892ff7)
(cherry picked from commit 27344675be)
Dynamic payload types were statically defined in Asterisk. This unfortunately
limited the number of dynamic payloads that could be registered. With this patch
dynamic payload type numbers are now assigned dynamically and per RTP instance.
However, in order to limit any issues where some clients expect the old
statically defined value this patch makes it so the value Asterisk used to pre-
designate is used for the dynamic assignment if available.
An option, "rtp_use_dynamic", has also been added (can be set in asterisk.conf)
that turns the new dynamic behavior on or off. When off it reverts back to using
statically defined payload values. This option defaults to "yes" in Asterisk 15.
ASTERISK-26515 #close
patches:
ASTERISK-26515.diff submitted by jcolp (license 5000
Change-Id: I7653465c5ebeaf968f1a1cc8f3f4f5c4321da7fc
Support for RFC3578 overlap dialling (i.e. 484 Response to partially matched
destinations) as currently provided by chan_sip is missing from res_pjsip.
This patch adds a new endpoint attribute (allow_overlap) [defaults to yes]
which when set to yes enables 484 responses to partial destination
matches rather than the current 404.
ASTERISK-26864
Change-Id: Iea444da3ee7c7d4f1fde1d01d138a3d7b0fe40f6
A new transport parameter 'symmetric_transport' has been added.
When a request from a dynamic contact comes in on a transport with
this option set to 'yes', the transport name will be saved and used
for subsequent outgoing requests like OPTIONS, NOTIFY and INVITE.
It's saved as a contact uri parameter named 'x-ast-txp' and will
display with the contact uri in CLI, AMI, and ARI output. On the
outgoing request, if a transport wasn't explicitly set on the
endpoint AND the request URI is not a hostname, the saved transport
will be used and the 'x-ast-txp' parameter stripped from the
outgoing packet.
* config_transport was modified to accept and store the new parameter.
* config_transport/transport_apply was updated to store the transport
name in the pjsip_transport->info field using the pjsip_transport->pool
on UDP transports.
* A 'multihomed_on_rx_message' function was added to
pjsip_message_ip_updater that, for incoming requests, retrieves the
transport name from pjsip_transport->info and retrieves the transport.
If transport->symmetric_transport is set, an 'x-ast-txp' uri parameter
containing the transport name is added to the incoming Contact header.
* An 'ast_sip_get_transport_name' function was added to res_pjsip.
It takes an ast_sip_endpoint and a pjsip_sip_uri and returns a
transport name if endpoint->transport is set or if there's an
'x-ast-txp' parameter on the uri and the uri host is an ipv4 or
ipv6 address. Otherwise it returns NULL.
* An 'ast_sip_dlg_set_transport' function was added to res_pjsip
which takes an ast_sip_endpoint, a pjsip_dialog, and an optional
pjsip_tpselector. It calls ast_sip_get_transport_name() and if
a non-NULL is returned, sets the selector and sets the transport
on the dialog. If a selector was passed in, it's updated.
* res_pjsip/ast_sip_create_dialog_uac and ast_sip_create_dialog_uas
were modified to call ast_sip_dlg_set_transport() instead of their
original logic.
* res_pjsip/create_out_of_dialog_request was modified to call
ast_sip_get_transport_name() and pjsip_tx_data_set_transport()
instead of its original logic.
* Existing transport logic was removed from endpt_send_request
since that can only be called after a create_out_of_dialog_request.
* res_pjsip/ast_sip_create_rdata was converted to a wrapper around
a new 'ast_sip_create_rdata_with_contact' function which allows
a contact_uri to be specified in addition to the existing
parameters. (See below)
* res_pjsip_pubsub/internal_pjsip_evsub_send_request was eliminated
since all it did was transport selection and that is now done in
ast_sip_create_dialog_uac and ast_sip_create_dialog_uas.
* 'contact_uri' was added to subscription_persistence. This was
necessary because although the parsed rdata contact header has the
x-ast-txp parameter added (if appropriate),
subscription_persistence_update stores the raw packet which
doesn't have it. subscription_persistence_recreate was then
updated to call ast_sip_create_rdata_with_contact with the
persisted contact_uri so the recreated subscription has the
correct transport info to send the NOTIFYs.
* res_pjsip_session/internal_pjsip_inv_send_msg was eliminated since
all it did was transport selection and that is now done in
ast_sip_create_dialog_uac.
* pjsip_message_ip_updater/multihomed_on_tx_message was updated
to remove all traces of the x-ast-txp parameter from the
outgoing headers.
NOTE: This change does NOT modify the behavior of permanent
contacts specified on an aor. To do so would require that the
permanent contact's contact uri be updated with the x-ast-txp
parameter and the aor sorcery object updated. If we need to
persue this, we need to think about cloning permanent contacts into
the same store as the dynamic ones on an aor load so they can be
updated without disturbing the originally configured value.
You CAN add the x-ast-txp parameter to a permanent contact's uri
but it would be much simpler to just set endpoint->transport.
Change-Id: I4ee1f51473da32ca54b877cd158523efcef9655f
This patch updates the documenation in hep.conf.sample to better specify
how the various HEP modules interact.
ASTERISK-26717 #close
Change-Id: I337fb742a89e3ec5edc7fc7a7a0295218d841124
* apps/app_voicemail.c fromstring field added to mailbox which will
override the global fromstring if set.
ASTERISK-24562 #close
Change-Id: I5e90e3a1ec2b2d5340b49a0db825e4bbb158b2fe
This change updates the documentation for the outbound_proxy option
to ensure it is consistently stated that a full SIP URI must be
provided for the option.
The res_pjsip_outbound_registration module has also been changed so
that the provided outbound_proxy value is checked to ensure it is a
URI and if not an error is output stating so.
ASTERISK-26782
Change-Id: I6c239a32274846fd44e65b44ad9bf6373479b593
Using the same auth section for inbound and outbound authentication is not
recommended. There is a difference in meaning for an empty realm setting
between inbound and outbound authentication uses.
An empty inbound auth realm represents the global section's default_realm
value when the authentication object is used to challenge an incoming
request. An empty outgoing auth realm is treated as a don't care wildcard
when the authentication object is used to respond to an incoming
authentication challenge.
ASTERISK-26799
Change-Id: Id3952f7cfa1b6683b9954f2c5d2352d2f11059ce
Original patch by John Covert, slight modifications by me.
ASTERISK-17428 #close
Reported by: John Covert
Patches:
app_voicemail.c.patch (license #5512) patch uploaded by
John Covert
Change-Id: Ic3361b0782e5a5397a19ab18eb8550923a9bd6a6
The entry for 'identify' was incorrectly placed in the
res_pjsip section when it should be in
res_pjsip_endpoint_identifier_ip.
ASTERISK-26785 #close
Change-Id: Ia1372b12a952bfe2df6b1b1e0e725ca306a5d41a
This change adds experimental support for providing RTCP
feedback information to codec modules so they can dynamically
change themselves based on conditions.
ASTERISK-26584
Change-Id: Ifd6aa77fb4a7ff546c6025900fc2baf332c31857
ast_loggrabber gathers log files from customizable search patterns,
optionally converts POSIX timestamps to a readable format and
tarballs the results.
Also a few tweaks were made to ast_coredumper.
Change-Id: I8bfe1468ada24c1344ce4abab7b002a59a659495
(cherry picked from commit c709152878)
This utility allows easy manipulation of asterisk coredumps.
* Configurable search paths and patterns for existing coredumps
* Can generate a consistent coredump from the running instance
* Can dump the lock_infos table from a coredump
* Dumps backtraces to separate files...
- thread apply 1 bt full -> <coredump>.thread1.txt
- thread apply all bt -> <coredump>.brief.txt
- thread apply all bt full -> <coredump>.full.txt
- lock_infos table -> <coredump>.locks.txt
* Can tarball corefiles and optionally delete them after processing
* Can tarball results files and optionally delete them after processing
* Converts ':' in coredump and results file names '-' to facilitate
uploading. Jira for instance, won't accept file names with colons
in them.
Tested on Fedora24+, Ubuntu14+, Debian6+, CentOS6+ and FreeBSD9+[1].
[1] For *BSDs, the "devel/gdb" package might have to be installed to
get a recent gdb. The utility will check all instances of gdb
it finds in $PATH and if one isn't found that can run python, it
prints a friendly error.
Change-Id: I935d37ab9db85ef923f32b05579897f0893d33cd
(cherry picked from commit cb47b45560)
Use of the new logging is as simple as issuing the new CLI command or
setting the new pjproject.conf option.
Other options that can affect the logging are how you have the pjproject
log levels mapped to Asterisk log types in pjproject.conf and if you have
configured Asterisk to log the DEBUG type messages. Altering the
pjproject.conf level mapping shouldn't be necessary for most installations
as the default mapping is sensible. Configuring Asterisk to log the DEBUG
message type is standard practice for collecting debug information.
* Added CLI "pjproject set log level" command to dynamically adjust the
maximum pjproject log message level.
* Added CLI "pjproject show log level" command to see the currently set
maximum pjproject log message level.
* Added pjproject.conf startup section "log_level" option to set the
initial maximum pjproject log message level so all messages could be
captured from initialization.
* Set PJ_LOG_MAX_LEVEL to 6 to compile in all defined logging levels into
bundled pjproject. Pjproject will use the currently set run time log
level to determine if a log message is generated just like Asterisk
verbose and debug logging levels.
* In log_forwarder(), made always log enabled and mapped pjproject log
messages. DEBUG mapped log messages are no longer gated by the current
Asterisk debug logging level.
* Removed RAII_VAR() from res_pjproject.c:get_log_level().
ASTERISK-26630 #close
Change-Id: I6dca12979f482ffb0450aaf58db0fe0f6d2e5389
This works the same as for AMI manager variables. Set
"channelvars=foo,bar" in your ari.conf general section, and then the
channel variables "foo" and "bar" (along with their values), will
appear in every Stasis websocket channel event.
ASTERISK-26492 #close
patches:
ari_vars.diff submitted by Mark Michelson
Change-Id: I5609ba239259577c0948645df776d7f3bc864229
Since adding all remaining rates of Signed Linear (ASTERISK-24274), SILK
(Gerrit 3136) and Codec 2 (ASTERISK-26217), no RTP Payload Type is left in the
dynamic range (96-127). RFC 3551 section 3 allows to reassign other ranges.
Consequently, when the dynamic range is exhausted, this change utilizes payload
types in the range between 35 and 63 giving room for another 29 payload types.
ASTERISK-26311 #close
Change-Id: I7bc96ab764bc30098a178b841cbf7146f9d64964
codecs.conf.sample was missing codec opus's configuration options, descriptions,
and examples. This patch adds the configuration options and examples to
codecs.conf.sample that can be used with codec_opus.
ASTERISK-26538 #close
Change-Id: I1d89bb5e01d3e3b5bd78951b8dd0ff077a83dc8b
Removing explicit transport definition for endpoints and registrations. It
isn't necessary and isn't generally advised.
ASTERISK-26514 #close
Change-Id: Ifdec5e631962438a4683600968dfa4bfd15909fb
Support for referring to DAHDI channels by logical names was added in
(FIXME: when? Asterisk 11? 1.8?) and was intended to be part of support
of refering to channels by name.
While technically usable, it has never been properly supported in
dahdi-tools, as using it would require many changes at the Asterisk
level. Instead logical mapping was added at the kernel level.
Thus it seems that refering to DAHDI channels by name is not really used
by anyone, and therefore should probably be removed.
Change-Id: I7d50bbfd9d957586f5cd06570244ef87bd54b485
When channel format changes occurred as a result of an RTP
re-negotiation the bridge was not informed this had happened.
As a result the bridge technology was not re-evaluated and the
channel may have been in a bridge technology that was incompatible
with its formats. The bridge is now unbridged and the technology
re-evaluated when this occurs.
The chan_pjsip module also allowed asymmetric codecs for sending
and receiving. This did not work with all devices and caused one
way audio problems. The default has been changed to NOT do this
but to match the sending codec to the receiving codec. For users
who want asymmetric codecs an option has been added, asymmetric_rtp_codec,
which will return chan_pjsip to the previous behavior.
The codecs returned by the chan_pjsip module when queried by
the bridge_native_rtp module were also not reflective of the
actual negotiated codecs. The nativeformats are now returned as
they reflect the actual negotiated codecs.
ASTERISK-26423 #close
Change-Id: I6ec88c6e3912f52c334f1a26983ccb8f267020dc
This change adds support for dual stack automatically. No
configuration is required and the IP address and version
in the SIP messages and SDP will be automatically changed
based on the transport over which the message is being
sent. RTP usage has also been changed to listen on both
IPv4 and IPv6 simultaneously to allow media to flow, and
to allow ICE support on both simultaneously. This also
allows failover between IPv6 and IPv4 to work as expected.
ASTERISK-26309 #close
Change-Id: I235a421d8f9a326606d861b449fa6fe3a030572d
Introduces ice_blacklist configuration in rtp.conf. Subnets listed in the
form ice_blacklist = <subnet spec>, e.g. ice_blacklist =
192.168.1.0/255.255.255.0, are excluded from ICE host, srflx and relay
discovery. This is useful for optimizing the ICE process where a system
has multiple host address ranges and/or physical interfaces and certain
of them are not expected to be used for RTP. Multiple ice_blacklist
configuration lines may be used. If left unconfigured, all discovered
host addresses are used, as per previous behavior.
Documention in rtp.conf.sample.
ASTERISK-26418 #close
Change-Id: Ibee88f80d7693874fda1cceaef94a03bd86012c9
We use a lot res_calendar, we are very happy with that, especially
because you use libical, the almost alone opensource library that
supports really ical format with all types of recurrency.
Nevertheless, some features are missed for our business use cases.
This first patch adds a new option in calendar.conf:
fetch_again_at_reload. Be my guest for a better name.
If it's true, when you'll launch "module reload res_calendar.so",
Asterisk will download again the calendar.
The business use case is that we have a WebUI with a scheduler planner,
we know when the calendars are modified.
For now, we need to define 1 minute of timeout to have a chance that
our user doesn't wait too long between the modification and the real
test. But it generates a lot of useless HTTP traffic.
ASTERISK-26422 #close
Change-Id: I384b02ebfa42b142bbbd5b7221458c7f4dee7077
The pooling, shared_connection, limit, and idlecheck options
are no longer used in res_odbc.
ASTERISK-26389
Change-Id: I2fde7b467d01f9d1c82cc0a339bb4f7e1dd6bbe6
* Make 'cdrzone=UTC' work properly.
* Fix the documentation of cdr_mysql.conf: it's cdrzone and not timezone
ASTERISK-26359 #close
Change-Id: I2a6f67b71bbbe77cac31a34d0bbfb1d67c933778
This implements the chan_sip legacy_useroption_parsing option but with a
better name.
* Made the caller-id number and redirecting number strings obtained from
incoming SIP URI user fields always truncated at the first semicolon.
People don't care about anything after the semicolon showing up on their
displays even though the RFC allows the semicolon.
ASTERISK-26316 #close
Reported by: Kevin Harwell
Change-Id: Ib42b0e940dd34d84c7b14bc2e90d1ba392624f62
Richard Mudgett
Corey Farrell
ghjm
Sean Bright
Rodrigo Ramírez Norambuena
Joshua Colp
Jenkins2
Alexander Traud
Nir Simionovich
George Joseph
Andrey Egorov
Kevin Harwell
Mark Michelson
Alexei Gradinari
Martin Tomec
Steve Davies
Walter Doekes
zuul
Richard Begg
Matt Jordan
Daniel Journo
Tzafrir Cohen
frahaase
Lorenzo Miniero
Sebastian Gutierrez
Sebastien Duthil
Rusty Newton
Michael Walton
Ludovic Gasc (GMLudo)