During load time in res_pjsip if an error occurred the operation would attempt to rollback all
operations done during load. This is not permitted by PJSIP as it will assert if the operation has
not been done. This fix changes the code so it will only rollback what has been initialized already.
Further changes also prevent res_pjsip and res_pjsip_session from being unloaded. This is due to
limitations within PJSIP itself. The library environment can only be changed to a certain extent
and does not provide the ability, currently, to deinitialize certain required functionality.
(closes issue ASTERISK-22474)
Reported by: Corey Farrell
........
Merged revisions 399624 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399625 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Moved rtcp_report RAII_VAR declaration into the loop so it is unref'ed
after every loop. Moved message_blob to loop and switched it to a regular
variable. The regular variable was used since message_blob is used in a
very contained way.
(closes issue ASTERISK-22565)
Reported by: Corey Farrell
Patches:
rtcp_report-leak.patch (license #5909) patch uploaded by Corey Farrell
Tested by: Corey Farrell
........
Merged revisions 399607 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399608 65c4cc65-6c06-0410-ace0-fbb531ad65f3
pjsip's message technology was being registered as 'sip', which was causing it
to not load due it conflicting with chan_sip's registered 'sip' technology for
messaging. It now registers as 'pjsip'. However, due to this change the "to"
field for outgoing pjsip messages need to be prefixed with 'pjsip:' instead of
'sip:'. Incoming messages to res_pjsip_messaging will automatically have their
"to" fields altered in order to accommodate the change. Outgoing messages also
handle changing it back to 'sip' before being sent so the pjsip library will
properly handle it.
(closes issue ASTERISK-22445)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2833/
........
Merged revisions 399339 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399340 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The endpoint option does not apply to communication with external entities. Rather,
the option is applied to all communications with the endpoint. The external_media_address
transport configuration option may override the endpoint option if it turns out that
we are going to be communicating with an external entity.
Two things of note:
1) I have not updated the XML documentation. This is being taken care of by Rusty as part
of his work on issue ASTERISK-22405
2) This commit is likely to cause testsuite failures since there are tests that use the
external_media_address endpoint option, and they will need to be changed over. Well, I'm
planning to get that updated ASAP after this commit.
(closes issue ASTERISK-22528)
reported by Rusty Newton
........
Merged revisions 399283 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399284 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fixes regression introduced by -r374096.
* Made res_speech.export.in export ast_* symbols instead of specific
functions.
* Made app_speech_utils.c declare that it is dependent upon res_speech.
(issue ASTERISK-17136)
Reported by: Richard Kenner
........
Merged revisions 399197 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399198 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Dial, Queue, and FollowMe applications need to inhibit the bridging
initial connected line exchange in order to support the 'I' option.
* Replaced the pass_reference flag on ast_bridge_join() with a flags
parameter to pass other flags defined by enum ast_bridge_join_flags.
* Replaced the independent flag on ast_bridge_impart() with a flags
parameter to pass other flags defined by enum ast_bridge_impart_flags.
* Since the Dial, Queue, and FollowMe applications are now the only
callers of ast_bridge_call() and ast_bridge_call_with_flags(), changed the
calling contract to require the initial COLP exchange to already have been
done by the caller.
* Made all callers of ast_bridge_impart() check the return value. It is
important. As a precaution, I also made the compiler complain now if it
is not checked.
* Did some cleanup in parking_tests.c as a result of checking the
ast_bridge_impart() return value.
An independent, but associated change is:
* Reduce stack usage in ast_indicate_data() and add a dropping redundant
connected line verbose message.
(closes issue ASTERISK-22072)
Reported by: Joshua Colp
Review: https://reviewboard.asterisk.org/r/2845/
........
Merged revisions 399136 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399138 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With this change, if no realm is specified in an outbound auth
section, then we will simply match the realm that was present
in the 401/407 challenge.
(closes issue ASTERISK-22471)
Reported by George Joseph
(closes issue ASTERISK-22386)
Reported by Rusty Newton
Patches:
outbound_auth_realm_v4.patch uploaded by George Joseph (License #6322)
........
Merged revisions 399059 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399082 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch uses PJSIP's pj_log_set_log_func() to forward PJSIP's log
messages to Asterisk's logger. This is done in a new module:
res_pjsip_log_forwarder.so.
This patch sets defaultenabled on the existing res_pjsip_logger.so to
no, since logging every SIP packet seems a bit odd to do by default, and
is (hopefully) less necessary with regular PJSIP logging.
It also removes res_rtp_asterisk's disabling of PJSIP logging.
(closes issue ASTERISK-22360)
Reported by: Joshua Colp
Review: https://reviewboard.asterisk.org/r/2830/
........
Merged revisions 399049 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399051 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When I moved the ARI WebSocket from /ws to /ari/events, I added code to
allow a WebSocket to connect without specifying the subprotocol if
there's only one subprotocol handler registered for the WebSocket.
Naively, I coded it to always respond with the subprotocol in use.
Unfortunately, according to RFC 6455, if the server's response includes
a subprotocol header field that "indicates the use of a subprotocol that
was not present in the client's handshake [...], the client MUST _Fail
the WebSocket Connection_.", emphasis theirs.
This patch correctly omits the Sec-WebSocket-Protocol if one is not
specified by the client.
(closes issue ASTERISK-22441)
Review: https://reviewboard.asterisk.org/r/2828/
........
Merged revisions 399039 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399042 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* One bug fix. Made the synopsis for "type" to accurate.
* changing the usage of "IP-domains" to "IP addresses"
* clarifying the usage for the options, by adding a relevant description for
each
* modified other areas of the XML help for clarity, such as the module
description and a few synopsis changes here and there. See the patch.
(issue ASTERISK-22458)
(closes issue ASTERISK-22458)
Reported By: Rusty Newton
Review: https://reviewboard.asterisk.org/r/2823/
........
Merged revisions 399017 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399018 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Connected line updates are now only sent out if an actual update needs to occur.
This happens under the following conditions:
1. The endpoint we are sending to is trusted.
2. Either a P-Asserted-Identity or Remote Party-ID header needs to be added/sent.
3. The connected id's number and name are valid.
Also added an SDP when an update is sent out.
(closes issue AST-1212)
Reported by: John Bigelow
Review: https://reviewboard.asterisk.org/r/2831/
........
Merged revisions 398806 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398808 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Sometimes the Google Voice servers have a bad habit of sending out 1
byte replies to the xmpp resource. When a blank 1 byte reply is
received from the socket the buffer attempts to wait (endlessly) for
the rest of the reply from google which effectively blocks the socket
and google voice calls will no longer come into the server.
This patch allows the xmpp module to correctly detect empty packets and
send out ping replies to google. It also sets a socket timeout on the
default socket which prevents the xmpp socket from closing and
preventing future google voice calls from coming into the server.
Furthermore instead of sending an empty reply back to google we send a
proper xmpp ping reply back. This also adds several more
socket messages.
(closes issue ASTERISK-22347)
Reported by: Andrew Nagy
Review: https://reviewboard.asterisk.org/r/2771
Patches:
xmpp_fix_1.diff uploaded by Andrew Nagy (License #6524)
........
Merged revisions 398618 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 398619 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398620 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r398558 | kmoore | 2013-09-06 14:28:16 -0500 (Fri, 06 Sep 2013) | 17 lines
Fix Jabber/XMPP distributed MWI
The mailbox and context are swapped on the receiving end for all users
of Jabber and XMPP distributed MWI in Asterisk 1.8 and all more recent
versions. This swaps those values to be correct when publishing to the
internal event system from Jabber/XMPP distributed MWI state.
(closes issue ASTERISK-22435)
Reported by: abelbeck
Tested by: Michael Keuter
Patches:
asterisk-1.8-res_jabber-aji_handle_pubsub_event.patch uploaded by abelbeck
asterisk-11-res_xmpp-xmpp_pubsub_handle_event.patch uploaded by abelbeck
........
Merged revisions 398523 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r398577 | kmoore | 2013-09-06 16:00:56 -0500 (Fri, 06 Sep 2013) | 10 lines
Commit the remainder of r398523
This is a missing part of the commit in revision 398523 that corrects
the name of a variable.
(issue ASTERISK-22435)
........
Merged revisions 398576 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 398558,398577 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 398580 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398603 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When AST_DEVMODE is not defined, ast_asserts are not compiled into the
binary. In some cases, this means variables are not referenced or are
set but unused which causes warnings to show up.
(closes issue ASTERISK-22446)
Reported by: Jason Parker (qwell)
........
Merged revisions 398521 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398522 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Some configuration objects currently won't place nice if reloaded.
Specifically, in this case the pjsip transport objects. Now when
registering an object in sorcery one may specify that the object is
allowed to be reloaded or not. If the object is set to not reload
then upon reloading of the configuration the objects of that type
will not be reloaded. The initially loaded objects of that type
however will remain.
While the transport objects will not longer be reloaded it is still
possible for a user to configure an endpoint to an invalid transport.
A couple of log messages were added to help diagnose this problem if
it occurs.
(closes issue ASTERISK-22382)
Reported by: Rusty Newton
(closes issue ASTERISK-22384)
Reported by: Rusty Newton
Review: https://reviewboard.asterisk.org/r/2807/
........
Merged revisions 398139 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398140 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With the new work in Asterisk 12, there are some uses of the
optional_api that are prone to failure. The details are rather involved,
and captured on [the wiki][1].
This patch addresses the issue by removing almost all of the magic from
the optional API implementation. Instead of relying on weak symbol
resolution, a new optional_api.c module was added to Asterisk core.
For modules providing an optional API, the pointer to the implementation
function is registered with the core. For modules that use an optional
API, a pointer to a stub function, along with a optional_ref function
pointer are registered with the core. The optional_ref function pointers
is set to the implementation function when it's provided, or the stub
function when it's now.
Since the implementation no longer relies on magic, it is now supported
on all platforms. In the spirit of choice, an OPTIONAL_API flag was
added, so we can disable the optional_api if needed (maybe it's buggy on
some bizarre platform I haven't tested on)
The AST_OPTIONAL_API*() macros themselves remained unchanged, so
existing code could remain unchanged. But to help with debugging the
optional_api, the patch limits the #include of optional API's to just
the modules using the API. This also reduces resource waste maintaining
optional_ref pointers that aren't used.
Other changes made as a part of this patch:
* The stubs for http_websocket that wrap system calls set errno to
ENOSYS.
* res_http_websocket now properly increments module use count.
* In loader.c, the while() wrappers around dlclose() were removed. The
while(!dlclose()) is actually an anti-pattern, which can lead to
infinite loops if the module you're attempting to unload exports a
symbol that was directly linked to.
* The special handling of nonoptreq on systems without weak symbol
support was removed, since we no longer rely on weak symbols for
optional_api.
[1]: https://wiki.asterisk.org/wiki/x/wACUAQ
(closes issue ASTERISK-22296)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2797/
........
Merged revisions 397989 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397990 65c4cc65-6c06-0410-ace0-fbb531ad65f3
his patch implements the ARI API's for stored recordings. While the
original task only specified deleting a recording, it was simple
enough to implement the GET for all recordings, and for an individual
recording.
The recording playback operation was modified to use the same code for
accessing the recording as the REST API, so that they will behave
consistently.
There were several problems with the api-docs that were also fixed,
bringing the ARI spec in line with the implementation. There were some
'wishful thinking' fields on the stored recording model (duration and
timestamp) that were removed, because I ended up not implementing a
metadata file to go along with the recording to store such information.
The GET /recordings/live operation was removed, since it's not really
that useful to get a list of all recordings that are currently going
on in the system. (At least, if we did that, we'd probably want to
also list all of the current playbacks. Which seems weird.)
(closes issue ASTERISK-21582)
Review: https://reviewboard.asterisk.org/r/2693/
........
Merged revisions 397985 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397988 65c4cc65-6c06-0410-ace0-fbb531ad65f3
PJSIP's PIDF API does not replace angle brackets with
their appropriate counterparts for XML. So we have to
do it ourself. In this particular case, the problem had
to do with attempting to place an unsanitized SIP URI
into an XML node. Now we don't get a 488 from recipients
of our PIDF NOTIFYs.
........
Merged revisions 397968 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397969 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The previous method did not allocate enough space to create
the entire string, but adjusted the string's slen value to
be larger than the actual allocation. This resulted in garbled
text in NOTIFY requests from Asterisk.
This method allocates the proper amount of space first and then
writes the content into the buffer.
........
Merged revisions 397960 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397962 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The previous placement would result in the resubscribe() callback called instead of
the subscription_terminated() callback being called when a subscription was ended
via a SUBSCRIBE request. This would result in confusing PJSIP and having it throw
an assertion.
........
Merged revisions 397955 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397957 65c4cc65-6c06-0410-ace0-fbb531ad65f3
RFC 5407 section 3.1.2 details a scenario where a UAC sends
a CANCEL at the same time that a UAS sends a 200 OK for the
INVITE that the UAC is canceling. When this occurs, it is the
role of the UAC to immediately send a BYE to terminate
the call.
This scenario was reproducible by have a Digium phone with two lines
place a call to a second phone that forwarded the call to the second
line on the original phone. The Digium phone, upon realizing that it
was connecting to itself, would attempt to cancel the call. The timing
of this happened to trigger the aforementioned race condition about
80% of the time. Asterisk was not doing its job of sending a BYE
when receiving a 200 OK on a cancelled INVITE. The result was that
the ast_channel structure was destroyed but the underlying SIP
session, as well as the PJSIP inv_session and dialog, were still
alive. Attempting to perform an action such as a transfer, once in
this state, would result in Asterisk crashing.
The circumstances are now detected properly and the session is ended
as recommended in RFC 5407.
(closes issue AST-1209)
reported by John Bigelow
........
Merged revisions 397945 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397956 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A problem encountered during testing was that res_pjsip_refer would
not ever send a NOTIFY with a 200 OK sipfrag. This is because the framehook
that was supposed to send the NOTIFY would never be told that an answer
had occurred. This happened for two reasons:
1) The transferee channel on which the framehook was on was already up.
2) Answers are rarely if ever written to channels. Rather, the ast_answer()
or ast_raw_answer() function is used to answer channels.
Thanks to a suggestion by Matt Jordan, the best way to detect that the call
had been answered was to find out when the transferee channel joined a bridge.
With stasis this is an easy task. So now, in addition to the framehook logic,
there is a stasis subscription used to determine when the transferee has entered
a bridge. Once it has entered, an appropriate NOTIFY is sent.
........
Merged revisions 397876 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397877 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Dialog matching is performed in the distributor for the sole
purpose of retrieving an associated serializer so the request
may be serialized.
This patch fixes two problems.
First, incoming CANCEL requests that had no to-tag (which really
should be *all* CANCEL requests) would not match with a dialog.
An earlier bug fix to deal with early CANCEL requests would result
in the CANCEL being replied to with a 481. The fix for this is to
find the matching INVITE transaction and get the dialog from that
transaction.
Second, no SIP responses were matching dialogs. This is because we
were inverting the tags that we were passing into PJSIP's dialog
finding function. This logic has been corrected by setting local
and remote tag variables based on whether the incoming message is
a request or response.
........
Merged revisions 397854 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397855 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Stasis events (which get distributed over the ARI WebSocket) are created
by subscribing to the channel_all_cached and bridge_all_cached topics,
filtering out events for channels/bridges currently subscribed to.
There are two issues with that. First was a race condition, where
messages in-flight to the master subscribe-to-all-things topic would get
sent out, even though the events happened before the channel was put
into Stasis. Secondly, as the number of channels and bridges grow in the
system, the work spent filtering messages becomes excessive.
Since r395954, individual channels and bridges have caching topics, and
can be subscribed to individually. This patch takes advantage, so that
channels and bridges are subscribed to on demand, instead of filtering
the global topics.
The one case where filtering is still required is handling BridgeMerge
messages, which are published directly to the bridge_all topic.
Other than the change to how subscriptions work, this patch mostly just
moves code around. Most of the work generating JSON objects from
messages was moved to .to_json handlers on the message types. The
callback functions handling app subscriptions were moved from res_stasis
(b/c they were global to the model) to stasis/app.c (b/c they are local
to the app now).
(closes issue ASTERISK-21969)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2754/
........
Merged revisions 397816 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397820 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The rtpengine configuration parameter was documented in the XML documentation,
but it was not actually registered with the sorcery object. This adds the
parameter with a default of "asterisk", such that res_rtp_asterisk is chosen as
the default RTP implementation.
(closes issue ASTERISK-22380)
Reported by: Rusty Newton
Tested by: Rusty Newton
........
Merged revisions 397621 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397622 65c4cc65-6c06-0410-ace0-fbb531ad65f3
DTMF start/end and hold/unhold events have state because a DTMF begin
event and hold event must be ended by something.
The following cases need to be handled when a channel is moved around in
the system.
* When a channel leaves a bridge it may owe a DTMF end event to the
bridge.
* When a channel leaves a bridge it may owe an UNHOLD event to the bridge.
(This case is explicitly ignored because things like transfers need
explicit control over this.)
* When a channel leaves the bridging system it may need to simulate a DTMF
end event to the channel.
* When a channel leaves the bridging system it may need to simulate an
UNHOLD event to the channel.
The patch also fixes the following:
* Fixes playing a file and restarting MOH using the latest MOH class used.
(closes issue ASTERISK-22043)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2791/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397577 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds error checking to ARI bridge operations, when
adding/removing channels to/from bridges.
In general, the error codes fall out as follows:
* Bridge not found - 404 Not Found
* Bridge not in Stasis - 409 Conflict
* Channel not found - 400 Bad Request
* Channel not in Stasis - 422 Unprocessable Entity
* Channel not in this bridge (on remove) - 422 Unprocessable Entity
(closes issue ASTERISK-22036)
Review: https://reviewboard.asterisk.org/r/2769/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397565 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds pass through support for Opus and VP8. That includes:
* Format attribute negotiation for Opus. Note that unlike some other codecs,
the draft RFC specifies having spaces delimiting the attributes in addition
to ';', so you have "attra=X; attrb=Y". This broke the attribute parsing in
chan_sip, so a small tweak was also included in this patch for that.
* A format attribute negotiation module for Opus, res_format_attr_opus
* Fast picture update for VP8. Since VP8 uses a different RTCP packet number
than FIR, this really is specific to VP8 at this time.
Note that the format attribute negotiation in res_pjsip_sdp_rtp was written
by mjordan. The rest of this patch was written completely by Lorenzo Miniero.
Review: https://reviewboard.asterisk.org/r/2723/
(closes issue ASTERISK-21981)
Reported by: Tzafrir Cohen
patches:
asterisk_opus+vp8_passthrough_20130718.patch uploaded by lminiero (License 6518)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397526 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are times when a configuration option should not have documentation.
1. Some options are registered with a particular object merely as a warning to
users. These options aren't even really 'deprecated' - which has its own
separate API call - they are actually provided by a different configuration
file. The options are merely registered so that the user gets a warning that
a different configuration file provides the item.
2. Some object types - most notably some used by modules that use sorcery - are
completely internal and should never be shown to the user.
3. Sorcery itself has several 'hidden' fields that should never be shown to a
user.
This patch updates the configuration framework and sorcery with additional API
calls that allow a module to register types as internal and options as not
requiring documentation. This bypasses the XML documentation checking.
This patch also re-enables the strict XML documentation checking in trunk, as
well as updates some documentation that was missing.
Review: https://reviewboard.asterisk.org/r/2785/
(closes issue ASTERISK-22359)
Reported by: Matt Jordan
(closes issue ASTERISK-22112)
Reported by: Rusty Newton
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397524 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds ARI functions to be able to turn on/off music on hold in a
bridge. It actually functions more as a background music without
further actions on the bridge since if the rest of the channels
in the bridge aren't explicitly muted, they will still be able
to communicate.
(closes issue ASTERISK-21974)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2688/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397505 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds a new dialplan application, SayAlphaCase, that performs much
the same function as SayAlpha except that it takes additional options
which allow the user to specify whether the case of each letter should
be announced for uppercase, lowercase, or all letters. Similar
functionality has been added to the SAY ALPHA AGI command via an
optional parameter.
Original Patch by: Kevin Scott Adams
Reported by: Kevin Scott Adams
Review: https://reviewboard.asterisk.org/r/2725/
(closes issue ASTERISK-20782)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397493 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The cause code needs to be passed from the disconnecting channel to the
bridge peers if the disconnecting channel dissolves the bridge.
* Made the call to an app_agent_pool agent disconnect with the busy cause
code if the agent does not ack the call in time or hangs up before acking
the call.
(closes issue ASTERISK-22042)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2772/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397472 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this change, we would reject SUBSCRIBE requests that had no Accept
headers. Now event package handlers that handle the default type for the
event package indicate that they do so. Therefore, if we have a handler that
can handle the default type, we can allow SUBSCRIBEs for the handler's event
package that have no Accept headers.
(closes issue ASTERISK-22067)
reported by Mark Michelson
Review: https://reviewboard.asterisk.org/r/2774
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397441 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Both /asterisk/variable and /channel/{channelId}/variable requires a
?variable parameter to be passed into the query. But we weren't checking
for the parameter being missing, which caused a segfault.
All calls now properly return 400 Bad Request errors when the parameter
is missing. The Swagger api-docs were updated accordingly.
(closes issue ASTERISK-22273)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397306 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In the shuffling around of res_stasis, control_continue was renamed to
stasis_app_control_continue, but the call in res_stasis wasn't updated.
In looking into it, it turns out it wasn't really the right thing to do
in res_stasis anyways.
This patch changes the handling of received a AST_CONTROL_HANGUP frame
to be the same as receiving a NULL frame, and removed the declaration of
control_continue(), since it doesn't exist any more.
(closes issue ASTERISK-22292)
Reported by: Denis Smirnov
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397295 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added an option flags parameter to interval hooks. Interval hooks now
can specify if the callback will affect the media path or not.
* Added an option flags parameter to the bridge action custom callback.
The action callback now can specify if the callback will affect the media
path or not.
* Made the holding bridge technology reexamine the participant idle mode
option whenever the entertainment is restarted.
* Fixed app_agent_pool waiting agents needlessly starting and stopping MOH
every second by specifying the heartbeat interval hook as not affecting
the media path.
* Fixed app_agent_pool agent alert from restarting the MOH after the alert
beep. The agent entertainment is now changed from MOH to silence after
the alert beep.
* Fixed holding bridge technology to defer starting the entertainment. It
was previously a mixture of immediate and deferred.
* Fixed holding bridge technology to immediately stop the entertainment.
It was previously a mixture of immediate and deferred. If the channel
left the bridging system, any deferred stopping was discarded before
taking effect.
* Miscellaneous holding bridge technology rework coding improvements.
Review: https://reviewboard.asterisk.org/r/2761/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397294 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This detects hangups that occur while bridged to allow channels to exit
app_stasis even if the hangup frame was absorbed by the bridge the
channel was in.
Reported by: David Lee
(closes issue ASTERISK-22297)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397244 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is more-or-less a reversion of previous ACL behavior so that
it is more self-contained. ACL sections are now only parsed if res_pjsip_acl.so
is loaded. Moreover, the configuration section is now "type=acl" instead of
"type=security".
The original reason for having ACLs configured in a "type=security" section
was to lump ACLs and other security-related items into the same section. The
problem is that ACLs really should be in their own sections and there are
no other security-related options implemented anyways.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397193 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This also removes documentation for the options that no longer exist.
(closes issue ASTERISK-22306)
reported by Rusty Newton
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397111 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added or modified text in the xml doc for the 'aor' config object to address a few issues:
* help for the 'mailboxes' option didn't make it clear how the "list" should be formatted.
* AoR object's involvement in inbound registration wasn't mentioned.
* help for the 'contact' option didn't describe how to specify multiple contacts.
* help for the 'max_contacts' option didn't tell whether it limited the amount of contacts defined through static configuration.
(issue ASTERISK-22118)
(closes issue ASTERISK-22118)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396902 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change protects accesses of res_parking such that it can unload
safely once transient uses of its registered functions are complete.
The parking API has been restructured such that its consumers do not
have access to the vtable exposed by the parking provider, but instead
route through stubs to prevent consumers from holding on to function
pointers.
This adds calls to all the parking unload functions and moves
application loading and unloading into functions in
parking_applications.c similar to the rest of the parts of res_parking.
Review: https://reviewboard.asterisk.org/r/2763/
(closes issue ASTERISK-22142)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396890 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This removes unused code, event types, IE pltypes, and event IE types
where possible and makes several functions private that were once
public. This includes a renumbering of the remaining event and IE types
which breaks binary compatibility with previous versions. The last
remaining consumers of the old event system (or parts thereof) are
main/security_events.c, res/res_security_log.c, tests/test_cel.c,
tests/test_event.c, main/cel.c, and the CEL backends.
Review: https://reviewboard.asterisk.org/r/2703/
(closes issue ASTERISK-22139)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396887 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This prevents swap optimization, merges, and transfers involving Stasis
application bridges. It wouldn't be nice if the bridge you thought you
owned disappeared from under you.
Reported-by: Richard Mudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396722 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch changes ARI bridging to allow other channel operations to
happen while the channel is bridged.
ARI channel operations are designed to queue up and execute
sequentially. This meant, though, that while a channel was bridged,
any other channel operations would queue up and execute only after the
channel left the bridge.
This patch changes ARI bridging so that channel commands can execute
while the channel is bridged. For most operations, things simply work
as expected. The one thing that ended up being a bit odd is recording.
The current recording implementation will fail when one attempts to
record a channel that's in a bridge. Note that the bridge itself may
be recording; it's recording a specific channel in the bridge that
fails. While this is an annoying limitation, channel recording is
still very useful for use cases such as voice mail, and bridge
recording makes up much of the difference for other use cases.
(closes issue ASTERISK-22084)
Review: https://reviewboard.asterisk.org/r/2726/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396568 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The lonely flag is an optional flag for bridge channels that will
make them leave a bridge when a channel leaves if only lonely
channels are in the bridge at that point. This is useful for things
like ending recording and playback channels when they cease to be
interacting with other channels in the bridge.
(closes issue ASTERISK-22117)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2721/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396497 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch implements the controls from ARI recordings. The controls
are:
* DELETE /recordings/live/{recordingName} - stop recording and
discard it
* POST /recordings/live/{recordingName}/stop - stop recording
* POST /recordings/live/{recordingName}/pause - pause recording
* POST /recordings/live/{recordingName}/unpause - resume recording
* POST /recordings/live/{recordingName}/mute - mute recording (record
silence to the file)
* POST /recordings/live/{recordingName}/unmute - unmute recording.
Since this underlying functionality did not already exist, is was
added to app.c by a set of control frames, similar to how playback
control works. The pause/mute control frames are toggles, even though
the ARI controls are idempotent, to be consistent with the playback
control frames.
(closes issue ASTERISK-22181)
Review: https://reviewboard.asterisk.org/r/2697/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396331 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This crash was caused by decrementing the reference count of a newly created message when
it should not be. This change fixes that but also fixes all other cases where this was
incorrectly done.
(closes issue ASTERISK-22188)
Reported by: Kinsey Moore
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396319 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Roles are now cleared with each entry into a bridge with addChannel.
If the roles parameter is present, the role specified will be applied
to all channels being added with the addChannel command.
(closes issue ASTERISK-21973)
Reported by: Matt Jordan
https://reviewboard.asterisk.org/r/2691/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396182 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds the following unit tests:
* create_lot: tests adding and removal of a new parking lot (baseline)
* park_extensions: creates a parking lot that registers extensions and
then confirms that all of the expected extensions exist
* extensions_conflicts: creates numerous parking lots to test that
extension conflicts in parking lots result in parking lot
creation failing
* dynamic_parking_variables: Tests that the creation of dynamic
parking lots respects the related channel variables set on the
channel that requests them.
* park_call: Tests adding a channel to a parking lot's holding bridge
by standard parking functions.
* retrieve_call: Tests pulling a channel out of a parking lot's
holding bridge via parked call retrieval functions.
(closes issue ASTERISK-22138)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2714/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396175 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The new res_ari_asterisk.so module presents several config options
from asterisk main. Unfortunately, they aren't exported, so the module
won't load on Linux.
This patch renames the variables, adding the ast_ prefix so they will
be exported.
Review: https://reviewboard.asterisk.org/r/2737
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396166 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds basic system information access to ARI.
The results are roughly what you get from 'core show settings', with a
few minor differences.
* Data is structured, with 'build', 'system', 'config' and 'status'
sub-objects.
* Each sub-object is selectable, using the ?only= parameter. A comma
separated list can be provided to select multiple sections.
* A few config options are numeric, for which 0 means 'unlimited'.
Instead of having a special interpretation of those fields, they
are simply omitted if they're 0.
* The information is limited to what might be useful to building
external applications.
(closes issue ASTERISK-21575)
Review: https://reviewboard.asterisk.org/r/2702/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396125 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Swagger allows parameters to be specified as 'allowMultiple', meaning
that the parameter may be specified as a comma separated list of
values.
I had written some of the API docs using that, but promptly forgot
about implementing it. This patch finally fills in that gap.
The codegen template was updated to represent 'allowMultiple' fields
as array/size fields in the _args structs. It also parses the comma
separated list using ast_app_separate_args(), so quoted strings in the
argument will be handled properly.
Review: https://reviewboard.asterisk.org/r/2698/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396122 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* BridgeEnter now contains the unique ID of the channel that is to be swapped out, if applicable.
* There is a ParkedCallSwap event that is sent when a parked channel has a new channel take its place.
(closes issue ASTERISK-22193)
reported by Mark Michelson
Review: https://reviewboard.asterisk.org/r/2712
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396107 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For chan_pjsip, this introduces CLI/AMI remote unregistration commands,
reworks CLI syntax for sending NOTIFYs, adds AMI qualification support,
and adds documentation for PJSIPNotify.
This also fixes two refcounting bugs in the outbound registration code.
Review: https://reviewboard.asterisk.org/r/2695/
(closes issue ASTERISK-21939)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396087 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
* It moves the pickup code out of features.c and into pickup.c
* It removes the vast majority of dead code out of features.c. In particular,
this includes the parking code.
(issue ASTERISK-22134)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396060 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
* It adds support for externally initiated parking requests. In particular,
chan_skinny has a protocol level message that initiates a call park.
This patch now supports that option, as well as the protocol specific
mechanisms in chan_dahdi/sig_analog and chan_mgcp.
* A parking bridge features virtual table has been added that provides
access to the parking functionality that the Bridging API needs. This
includes requests to park an entire 'call' (with little or no additional
information, thank you chan_skinny), perform a blind transfer to a parking
extension, determine if an extension is a parking extension, as well as the
actual "do the parking" request from the Bridging API.
* Refactoring in chan_mgcp, chan_skinny, and chan_dahdi to make use of the new
functions
* The removal of some - but not all - dead parking code from features.c
This also fixed blind transferring a multi-party bridge to a parking lot (which
was implemented, but had at least one code path where using the parking features
kK might not have worked)
Review: https://reviewboard.asterisk.org/r/2710
(closes issue ASTERISK-22134)
Reported by: Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396028 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This prevents XML documentation duplication by expanding channel and
bridge snapshot tags into channel and bridge snapshot parameter sets
with a given prefix or defaulting to no prefix. This also prevents
documentation from becoming fractured and out of date by keeping all
variations of the documentation in template form such that it only
needs to be updated once and keeps maintenance to a minimum.
Review: https://reviewboard.asterisk.org/r/2708/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395985 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In working with res_stasis, I discovered a significant limitation to
the current structure of stasis_caching_topics: you cannot subscribe
to cache updates for a single channel/bridge/endpoint/etc.
To address this, this patch splits the cache away from the
stasis_caching_topic, making it a first class object. The stasis_cache
object is shared amongst individual stasis_caching_topics that are
created per channel/endpoint/etc. These are still forwarded to global
whatever_all_cached topics, so their use from most of the code does
not change.
In making these changes, I noticed that we frequently used a similar
pattern for bridges, endpoints and channels:
single_topic ----------------> all_topic
^
|
single_topic_cached ----+----> all_topic_cached
|
+----> cache
This pattern was extracted as the 'Stasis Caching Pattern', defined in
stasis_caching_pattern.h. This avoids a lot of duplicate code between
the different domain objects.
Since the cache is now disassociated from its upstream caching topics,
this also necessitated a change to how the 'guaranteed' flag worked
for retrieving from a cache. The code for handling the caching
guarantee was extracted into a 'stasis_topic_wait' function, which
works for any stasis_topic.
(closes issue ASTERISK-22002)
Review: https://reviewboard.asterisk.org/r/2672/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395954 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch allows starting playback of audio through the CONTROL STREAM FILE
AGI command to start at a particular offset. It will also return the final
position of the file in the 'endpos' attribute.
(closes issue ASTERISK-17803)
Reported by: Murray Melvin
patches:
res_agi.c.r316293.diff uploaded by murraytm (license 6221)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395906 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This was created as a debugging tool before proper endpoint identifiers
were created. Using it now can actually lead to harmful results.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395868 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Joshua Colp
Richard Mudgett
Kevin Harwell
Mark Michelson
Rusty Newton
David M. Lee
Kinsey Moore
Matthew Jordan
Jonathan Rose
John Bigelow