255 Commits (28d0ec5421212e10af9baf8c70bc32d853352b25)

Author	SHA1	Message	Date
Joshua Colp	28d0ec5421	Add support for specifying the IP address to use for media streams in sip.conf ... (closes issue #14729) Reported by: _brent_ Patches: media_address.patch uploaded by brent (license 388) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225003 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
David Vossel	1d40faebac	contact header port ignored transport when using externip ... This patch adds support for TCP/TLS in the Contact header when using NAT, specifically externip or externhost. The original issue was that Asterisk sent 5060 as the port in the contact header whether TLS was used or not. Additionally, this patch adds 2 config options to sip.conf, specifically externtcpport and externtlsport. This allows a user to specify different external ports for TCP and TLS other than those used internally, this is especially useful in in a PAT/port redirection setup. Thanks to ebroad for reporting the issue and providing the patch! (closes issue #15880) Reported by: ebroad Patches: portmap.patch uploaded by ebroad (license 878) externtXXport_v2.patch uploaded by ebroad (license 878) Tested by: ebroad Review: https://reviewboard.asterisk.org/r/392/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@222398 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Kevin P. Fleming	20743ec07d	Allow non-compliant T.38 endpoints to be supportable via configuration option. ... Many T.38 endpoints incorrectly send the maximum IFP frame size they can accept as the T38FaxMaxDatagram value in their SDP, when in fact this value is supposed to be the maximum UDPTL payload size (datagram size) they can accept. If the value they supply is small enough (a commonly supplied value is '72'), T.38 UDPTL transmissions will likely fail completely because the UDPTL packets will not have enough room for a primary IFP frame and the redundancy used for error correction. If this occurs, the Asterisk UDPTL stack will emit log messages warning that data loss may occur, and that the value may need to be overridden. This patch extends the 't38pt_udptl' configuration option in sip.conf to allow the administrator to override the value supplied by the remote endpoint and supply a value that allows T.38 FAX transmissions to be successful with that endpoint. In addition, in any SIP call where the override takes effect, a debug message will be printed to that effect. This patch also removes the T38FaxMaxDatagram configuration option from udptl.conf.sample, since it has not actually had any effect for a number of releases. In addition, this patch cleans up the T.38 documentation in sip.conf.sample (which incorrectly documented that T.38 support was passthrough only). (issue #15586) Reported by: globalnetinc git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@222110 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Matthew Nicholson	a5eee590f4	Merged revisions 221360 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r221360 | mnicholson | 2009-09-30 14:36:06 -0500 (Wed, 30 Sep 2009) | 10 lines Fix SRV lookup and Request-URI generation in chan_sip. This patch adds a new field "portinuri" to the sip dialog struct and the sip peer struct. That field is used during RURI generation to determine if the port should be included in the RURI. It is also used in some places to determine if an SRV lookup should occur. (closes issue #14418) Reported by: klaus3000 Tested by: klaus3000, mnicholson Review: https://reviewboard.asterisk.org/r/369/ ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@221432 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Terry Wilson	865daf4858	Merged revisions 221086 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r221086 | twilson | 2009-09-30 09:49:11 -0500 (Wed, 30 Sep 2009) | 25 lines Change the SSRC by default when our media stream changes Be default, change SSRC when doing an audio stream changes Asterisk doesn't honor marker bit when reinvited to already-bridged RTP streams,resulting in far-end stack discarding packets with "old" timestamps that areactually part of a new stream. This patch sends AST_CONTROL_SRCUPDATE whenever there is a reinvite, unless the 'constantssrc' is set to true in sip.conf. The original issue reported to Digium support detailed the following situation: ITSP <-> Asterisk 1.4.26.2 <-> SIP-based Application Server Call comes in fromITSP, Asterisk dials the app server which sends a re-invite back toAsterisk--not to negotiate to send media directly to the ITSP, but to indicatethat it's changing the stream it's sending to Asterisk. The app servergenerates a new SSRC, sequence numbers, timestamps, and sets the marker bit on the new stream. Asterisk passes through the teimstamp of the new stream, butdoes not reset the SSRC, sequence numbers, or set the marker bit. When the timestamp on the new stream is older than the timestamp on the originalstream, the ITSP (which doesn't know there has been any change) discards the newframes because it thinks they are too old. This patch addresses this by changing the SSRC on a stream update unless constantssrc=true is set in sip.conf. Review: https://reviewboard.asterisk.org/r/374/ ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@221266 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Olle Johansson	79b9b75eab	Documentation in the commit messages is soon forgotten, please add it to the docs in the product. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@220295 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Olle Johansson	8af3a908a9	Update sip.conf.sample documentation, reorganize a bit ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@216694 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Olle Johansson	98f18d56b8	Merged revisions 216430 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r216430 | oej | 2009-09-04 15:45:48 +0200 (Fre, 04 Sep 2009) | 27 lines Make apps send PROGRESS control frame for early media and fix too early media issue in SIP The issue at hand is that some legacy (dying) PBX systems send empty media frames on PRI links *before* any call progress. The SIP channel receives these frames and by default signals 183 Session progress and starts sending media. This will cause phones to play silence and ignore the later 180 ringing message. A bad user experience. The fix is twofold: - We discovered that asterisk apps that support early media ("noanswer") did not send any PROGRESS frame to indicate early media. Fixed. - We introduce a setting in chan_sip so that users can disable any relay of media frames before the outbound channel actually indicates any sort of call progress. In 1.4, 1.6.0 and 1.6.1, this will be disabled for backward compatibility. In later versions of Asterisk, this will be enabled. We don't assume that it will change your Asterisk phone experience - only for the better. We encourage third-party application developers to make sure that if they have applications that wants to send early media, add a PROGRESS control frame transmission to make sure that all channel drivers actually will start sending early media. This has not been the default in Asterisk previous to this patch, so if you got inspiration from our code, you need to update accordingly. Sorry for the trouble and thanks for your support. This code has been running for a few months in a large scale installation (over 250 servers with PRI and/or BRI links to old PBX systems). That's no proof that this is an excellent patch, but, well, it's tested :-) ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@216438 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Tilghman Lesher	3028e257bb	Better parsing for the "register" line ... Allows characters that are otherwise used as delimiters to be used within certain fields (like the secret). (closes issue #15008, closes issue #15672) Reported by: tilghman Patches: 20090818__issue15008.diff.txt uploaded by tilghman (license 14) Tested by: lmadsen, tilghman git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@213098 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Matthew Nicholson	5583a4e955	This patch adds support for choosing a realm based on the domain in the From or To header in the incoming request. Eligible domains are taken from the domains list in the config file. This functionality is enabled when domainsasrealm is enabled in the config file. ... (closes issue #11361) Reported by: arkadia Patches: sip_realm_mnich_to_added_2.patch uploaded by arkadia (license 233) Tested by: arkadia git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@211947 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Kevin P. Fleming	e9d22f802e	Rename 'canreinvite' option to 'directmedia', with backwards compatibility. ... It is clear from multiple mailing list, forum, wiki and other sorts of posts that users don't really understand the effects that the 'canreinvite' config option actually has, and that in some cases they think that setting it to 'no' will actually cause various other features (T.38, MOH, etc.) to not work properly, when in fact this is not the case. This patch changes the proper name of the option to what it should have been from the beginning ('directmedia'), but preserves backwards compatibility for existing configurations. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@210190 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Mark Michelson	c058252718	Add configuration sample code for previous commit. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@209674 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Joshua Colp	48f7381af0	Fix the 'nat' option to actually do RFC3581 as expected and extend the configurable values for finer control. ... (closes issue #8855) Reported by: mikma Tested by: klaus3000, file git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203735 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Joshua Colp	59c1998d67	Improve T.38 negotiation by exchanging session parameters between application and channel. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203699 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Joshua Colp	5fcf193d7b	Correct documentation for the register line, specifically where the domain should be specified. ... (closes issue #14367) Reported by: Nick_Lewis git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@198791 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Sean Bright	f22962a0c1	Remove a bunch of trailing whitespace in preparation for reformatting/cleanup. ... Let's try that again, this time removing trailing whitespace and not leading whitespace. I can't believe no one noticed. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@197535 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Sean Bright	a7d813cae7	Remove a bunch of trailing whitespace in preparation for reformatting/cleanup. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@197528 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
David Vossel	f50bb3bfa4	SIP set outbound transport type from Registration ... In sip.conf the transport option allows for the configuration of what transport types (udp, tcp, and tls) a peer will accept, but only the first type listed was used for outbound connections. This patch changes this. Now the default transport type is only used until the peer registers. When registration takes place the transport type is parsed out of the Contact header. If the Contact header's transport type is equal to one that the peer supports, the peer's default transport type for outbound connections is set to match the Contact header's type. If the Contact header's transport type is not present, then the peer's default transport type is set to match the one the peer registered with. When a peer unregisters or the registration expires, the default transport type for that peer is reset. (closes issue #12282) Reported by: rjain Patches: reg_patch_1.diff uploaded by dvossel (license 671) Tested by: dvossel (closes issue #14727) Reported by: pj Patches: reg_patch_3.diff uploaded by dvossel (license 671) Tested by: pj, dvossel Review: https://reviewboard.asterisk.org/r/249/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@196416 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Mark Michelson	7b4eeed257	Add basic support for handling connected line-related UPDATE requests. ... SIP purists may want to look the other way... When COLP/CONP support for SIP was committed, there was a condition under which Asterisk may transmit a SIP UPDATE in order to communicate the change in connected line information. The issue here is that while we could send a SIP UPDATE message, we were not prepared to receive such an UPDATE and would always responde with a 501 when we received an UPDATE. The situation was a bit rough. We really want to be able to receive UPDATEs having to do with connected line changes, but the amount of effort involved in properly supporting RFC 3311 was staggering. This commit represents a compromise. First, it was decided that it is important to only send a SIP UPDATE to an endpoint that is able to handle one. So, now we have added parsing of the Allow header into SIP. We store the allowed methods on SIP peers so that when we communicate with them, we already will know what we can and cannot send to them. We will parse the peer's allowed methods when he registers with us. If the peer is not the type to register with us, but the qualify option is enabled, then we will use the response to the OPTIONS request we send the peer to determine the peer's allowed methods. When the peer's registration expires, or when qualify deems the peer to be unreachable, we clear the allowed methods from the peer. For an actual call, we will copy the peer's allowed methods to the sip_pvt representing the call leg. If we are communicating with an endpoint which is not a peer, then we will just parse the Allow header from the first message we receive during the call and store the information in the sip_pvt. If, during communication with a peer, we receive a 501 response, then we will make sure to save the fact that we cannot use that method when communicating with that peer. Now, with all that infrastructure in place, the only actual place we use this information currently is when attempting to send a connected line change using an UPDATE request. If we cannot send the change immediately using an UPDATE, we will set the SIP_NEEDREINVITE flag so that we can send a REINVITE as soon as it is allowed. The second part of the changes here is for Asterisk to accept UPDATE requests that have connected line changes. Since we are not fully supporting RFC 3311, Asterisk will NOT place the UPDATE method in Allow headers it sends. Instead, if you are communicating with what you know to be another Asterisk box, you may set the rpid_update parameter in sip.conf so that we will send UPDATEs to that Asterisk box. When we send a connected line update, we set a custom header called "X-Asterisk-rpid-update." On the receiving end, if Asterisk receives an UPDATE that does not have the "X-Asterisk-rpid-update" header present, then Asterisk will respond with a 501 since media-changing UPDATEs are not supported. We should never get such UPDATEs, since as was stated earlier, Asterisk does not put UPDATE in its Allow header. If the custom header is present in the received UPDATE, though, then we will check the incoming request for connected line updates and queue the update on the channel where the change occurred. ABE-1840 ABE-1822 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@195589 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
David Vossel	a6adc84e69	SIP option to specify outbound TLS/SSL client protocol. ... chan_sip allows for outbound TLS connections, but does not allow the user to specify what protocol to use (default was SSLv2, and still is if this new option is not specified). This patch lets the user pick the SSL/TLS client method for outbound connections in sip. (closes issue #14770) Reported by: TheOldSaint (closes issue #14768) Reported by: TheOldSaint Review: http://reviewboard.digium.com/r/240/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@191177 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Mark Michelson	3b68be6aaa	Remove nonexistent option from sip.conf.sample. ... The option to choose which connected line header to use is not 'rpid_header' but 'sendrpid' git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@190577 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
David Vossel	8f0b88c8c8	TLS/SSL private key option ... Adds option to specify a private key .pem file when configuring TLS or SSL in AMI, HTTP, and SIP. Before this, the certificate file was used for both the public and private key. It is possible for this file to hold both, but most configurations allow for a separate private key file to be specified. Clarified in .conf files how these options are to be used. The current conf files do not explain how the private key is handled at all, so without knowledge of Asterisk's TLS implementation, it would be hard to know for sure what was going on or how to set it up. Review: http://reviewboard.digium.com/r/234/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@190545 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Mark Michelson	4d74179f20	Add a new option, mwi_from, to sip.conf. ... This allows for you to change the From header for outgoing MWI NOTIFY requests. Prior to this, the best you could do was to set a callerid in the general section of sip.conf. The problem was that this was used for all outbound requests, not just MWI NOTIFY requests. AST-201 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@187560 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Mark Michelson	6f53ed4c67	This commit introduces COLP/CONP and Redirecting party information into Asterisk. ... The channel drivers which have been most heavily tested with these enhancements are chan_sip and chan_misdn. Further work is being done to add Q.SIG support and will be introduced in a later commit. chan_skinny has code added to it here, but according to user pj, the support on chan_skinny is not working as of now. This will be fixed in a later commit. A special thanks goes out to bugtracker user gareth for getting the ball rolling and providing the initial support for this work. Without his initial work on this, this would not have been nearly as painless as it was. This functionality has been tested by Digium's product quality department, as well as a customer site running thousands of calls every day. In addition, many many many many bugtracker users have tested this, too. (closes issue #8824) Reported by: gareth Review: http://reviewboard.digium.com/r/201 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@186525 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Joshua Colp	63de834395	Merge in the RTP engine API. ... This API provides a generic way for multiple RTP stacks to be integrated into Asterisk. Right now there is only one present, res_rtp_asterisk, which is the existing Asterisk RTP stack. Functionality wise this commit performs the same as previously. API documentation can be viewed in the rtp_engine.h header file. Review: http://reviewboard.digium.com/r/209/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@186078 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Tilghman Lesher	08971ce205	Merged revisions 186059 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/1.4 ................ r186059 | tilghman | 2009-04-02 12:09:13 -0500 (Thu, 02 Apr 2009) | 9 lines Merged revisions 186056 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.2 ........ r186056 | tilghman | 2009-04-02 12:02:18 -0500 (Thu, 02 Apr 2009) | 2 lines Fix for AST-2009-003 ........ ................ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@186060 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
David Vossel	da2230adf0	SIP preferred codec only feature ... Added an option to respond to a SIP invite with only the single most preferred joint codec. This limits the options of what codecs the other side can use. (closes issue #12485) Reported by: bamby Review: http://reviewboard.digium.com/r/206/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@183995 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Michiel van Baak	f1ae8e9f3b	Provide correct hint to debug SIP trouble in the default config ... (closes issue #14646) Reported by: strk git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@181499 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Mark Michelson	3a14487abf	Allow for "magic" pickups to work when we wish to ignore the context ... When the subscription context for a call pickup subscription differs from the context of the call pickup target, there's not an easy way to divine what context should be used for the pickup. The way to work around this is to use PICKUPMARK as the context for the pickup. This has been documented in the sip.conf.sample file (ABE-1708) closes issue #14567 submitted by: alecdavis git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@180155 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Olle Johansson	0685c4b281	Update documentation ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@172270 65c4cc65-6c06-0410-ace0-fbb531ad65f3	17 years ago
Olle Johansson	aca43d126a	Add some more notes about device matching. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@171880 65c4cc65-6c06-0410-ace0-fbb531ad65f3	17 years ago
Olle Johansson	2c4f19eb2c	Merged revisions 171837 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r171837 | oej | 2009-01-28 14:07:27 +0100 (Ons, 28 Jan 2009) | 2 lines Add a better explanation of the difference between the device namespace and the dialplan for newbies. ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@171838 65c4cc65-6c06-0410-ace0-fbb531ad65f3	17 years ago
Olle Johansson	d4736e9897	Clarify some misunderstandings and make it even more clear that you can refer to a peer ... in the register= line. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@168711 65c4cc65-6c06-0410-ace0-fbb531ad65f3	17 years ago
Mark Michelson	453b4cb8fb	Allow specifying a port number in the user portion of a register => line in sip.conf ... With this commit, a register => line in sip.conf may contain a port number in the "user" section of the line. Please see CHANGES and sip.conf.sample for more details regarding this. (closes issue #14198) Reported by: Nick_Lewis Patches: chan_sip.c-domainport2.patch uploaded by Nick (license 657) Tested by: Nick_Lewis git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@168575 65c4cc65-6c06-0410-ace0-fbb531ad65f3	17 years ago
Matthew Nicholson	91192e30c5	This patch adds a new 'ignoresdpversion' option to sip.conf. When this is ... enabled (either globally or for a specific peer), chan_sip will treat any SDP data it receives as new data and update the media stream accordingly. By default, Asterisk will only modify the media stream if the SDP session version received is different from the current SDP session version. This option is required to interoperate with devices that have non-standard SDP session version implementations (observed by toc on the bug tracker with Microsoft OCS which always uses 0 as the session version). http://reviewboard.digium.com/r/94/ (closes issue #13958) Reported by: toc Tested by: toc git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@165180 65c4cc65-6c06-0410-ace0-fbb531ad65f3	17 years ago
Joshua Colp	fd62012a31	Qualify trumps poke per lmadsen. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@164814 65c4cc65-6c06-0410-ace0-fbb531ad65f3	17 years ago
Joshua Colp	92a4edc593	Add configuration options for finer control over how Asterisk handles having to poke all peers at seemingly the same time. ... (closes issue #13217) Reported by: cervajs git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@164809 65c4cc65-6c06-0410-ace0-fbb531ad65f3	17 years ago
Dwayne M. Hubbard	f9b6507796	If 'faxdetect=yes' in sip.conf, switch to a 'fax' extension (if it exists) after T38 is negotiated. ... Terry Wilson created the original patch for this functionality, which I slightly modified and added the faxdetect=yes|no configuration option. This patch is only for T38 fax detection and does not do anything for G711 over SIP fax detection. By default, this option is disabled. Reviewboard: http://reviewboard.digium.com/r/69/ This functionality is for issue AST-140. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@161115 65c4cc65-6c06-0410-ace0-fbb531ad65f3	17 years ago
Sean Bright	7bd3ce358b	If you enabled 'notifycid' one of the limitations is that the calling channel ... is only found if it dialed the extension that was subscribed to. You can now specify 'ignore-context' for the 'notifycid' option in sip.conf which will, as it's value implies, ignore the current context of the caller when doing the lookup. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@158756 65c4cc65-6c06-0410-ace0-fbb531ad65f3	17 years ago
Sean Bright	6ba4e7853e	Allow devices that accept dialog-info+xml (like snoms) to get the Caller ID of ... the calling party when subscribed to the state of an extension that is ringing. This has some limitations which are documented in sip.conf.sample. (closes issue #13827) Reported by: seanbright Patches: issue13827.patch uploaded by seanbright (license 71) Reviewed by: russellb git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@154187 65c4cc65-6c06-0410-ace0-fbb531ad65f3	17 years ago
Olle Johansson	007807bf41	Updating docs ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@153983 65c4cc65-6c06-0410-ace0-fbb531ad65f3	17 years ago
Olle Johansson	d3517de987	Spaces to replace tabs... ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@153905 65c4cc65-6c06-0410-ace0-fbb531ad65f3	17 years ago
Olle Johansson	204845843e	Adding a separation of remote authentication and our authentication. ... remotesecret => our password for a remote service secret => our authentication when someone calls us Secret => still has both functions if remotesecret is not used. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@153904 65c4cc65-6c06-0410-ace0-fbb531ad65f3	17 years ago
Sean Bright	0327f37d34	The default in chan_sip for notifyringing is yes, so update the sample ... conf to reflect that. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@153296 65c4cc65-6c06-0410-ace0-fbb531ad65f3	17 years ago
Joshua Colp	f6c78aa0fe	*whistle* ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@147761 65c4cc65-6c06-0410-ace0-fbb531ad65f3	17 years ago
Joshua Colp	cebd2c1df2	Add support for subscribing to a voice mailbox on a remote SIP server and making the new/old message count available to local devices. (issue #AST-77) ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@147760 65c4cc65-6c06-0410-ace0-fbb531ad65f3	17 years ago
Tilghman Lesher	aada13230f	Merged revisions 142865 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r142865 | tilghman | 2008-09-12 15:37:18 -0500 (Fri, 12 Sep 2008) | 11 lines Create rules for disallowing contacts at certain addresses, which may improve the security of various installations. As this does not change any default behavior, it is not classified as a direct security fix for anything within Asterisk, but may help PBX admins better secure their SIP servers. (closes issue #11776) Reported by: ibc Patches: 20080829__bug11776.diff.txt uploaded by Corydon76 (license 14) Tested by: Corydon76, blitzrage ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142866 65c4cc65-6c06-0410-ace0-fbb531ad65f3	17 years ago
Tilghman Lesher	8b6dd2ad43	Merged revisions 138258 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r138258 | tilghman | 2008-08-15 17:33:42 -0500 (Fri, 15 Aug 2008) | 8 lines More fixes for realtime peers. (closes issue #12921) Reported by: Nuitari Patches: 20080804__bug12921.diff.txt uploaded by Corydon76 (license 14) 20080815__bug12921.diff.txt uploaded by Corydon76 (license 14) Tested by: Corydon76 ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@138260 65c4cc65-6c06-0410-ace0-fbb531ad65f3	17 years ago
Russell Bryant	35a37e6724	Merged revisions 137731 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r137731 | russell | 2008-08-14 09:05:23 -0500 (Thu, 14 Aug 2008) | 4 lines Comments in this config file were aligned only if your tab size was set to 8. So, convert tabs to spaces so that things should be aligned regardless of what tab size you use in your editor. ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@137732 65c4cc65-6c06-0410-ace0-fbb531ad65f3	17 years ago
Tilghman Lesher	6cb6583475	SIP should use the transport type set in the Moved Temporarily for the next ... invite. (closes issue #11843) Reported by: pestermann Patches: 20080723__issue11843_302_ignores_transport_16branch.diff uploaded by bbryant (license 36) 20080723__issue11843_302_ignores_transport_trunk.diff uploaded by bbryant (license 36) Tested by: pabelanger git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@135126 65c4cc65-6c06-0410-ace0-fbb531ad65f3	17 years ago