One of my recent commits broke this test. The error was:
[test_event.c:event_new_test:214]: Events expected to be identical
have different size: 69 != 59
The difference in size occurred because the first event had
the EID IE added to the event twice. ast_event_new() now always
adds it automatically. Previously it only added it if there
were no IEs specified, which was kind of weird.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370541 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Revision 370426 introduced the use of a nested function in tests/test_acl.c,
but the lack of the 'auto' scope specifier on the function and a forward
declaration resulted in compilation errors on the automated test systems.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370453 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Rules in ACLs (specified using 'permit' and 'deny') can now contain multiple
items (separated by commas), and items in the rule can be negated by prefixing
them with '!'. This simplifies Asterisk Realtime configurations, since it is no
longer necessray to control the order that the 'permit' and 'deny' columns are
returned from queries.
Review: https://reviewboard.asterisk.org/r/1592/
Initial patch contributed by Tilghman Lesher
Unit tests written by Kevin P. Fleming
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370426 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch includes the following:
* Unit tests for the abstract Jitter Buffer API. This includes both fixed
and adaptive flavors, testing nominal creation, frame input, frame retrieval,
resyncing; off nominal frame input overflow, out of order, and others.
* Tweaks to the abstract_jb API to remove the unnecessary resync_threshold
parameter from the create function (resync_threshold is already in the
struct passed into the create function)
* Ensure the fixed jitter buffer is empty before destroying it, to avoid an
ASSERT
* Don't "resync" the adaptive jitter buffer. The mechanism that was being
used actually causes the jitter buffer to think its being overflowed by going
around the jitterbuf API and attempting to 'resynch' it improperly. If a
resync is needed, the jitter buffer will do it properly by itself. Note that
this is only an optimization needed for trunk, as the worst that happens is
the loss of three voice packets before the adaptive jitter buffer will resync
anyway.
Review: https://reviewboard.asterisk.org/r/2035
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370387 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Allows the setting of flags via the config options api.
For example, code like this:
#define OPT1 1 << 0
#define OPT2 1 << 1
#define OPT3 1 << 2
struct thing {
unsigned int flags;
};
and a config like this:
[blah]
opt1=yes
opt2=no
opt3=yes
Review: https://reviewboard.asterisk.org/r/2004/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369454 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added documentation describing what flags and arguments to pass to
aco_option_register for default option types. Also changed the ACL
handler to use the flags parameter to differentiate between "permit"
and "deny" instead of adding an additional vararg parameter.
Review: https://reviewboard.asterisk.org/r/1969/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368663 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Presence support has been added. This is accomplished by
allowing for presence hints in addition to device state
hints. A dialplan function called PRESENCE_STATE has been
added to allow for setting and reading presence. Presence
can be transmitted to Digium phones using custom XML
elements in a PIDF presence document.
Voicemail has new APIs that allow for moving, removing,
forwarding, and playing messages. Messages have had a new
unique message ID added to them so that the APIs will work
reliably. The state of a voicemail mailbox can be obtained
using an API that allows one to get a snapshot of the mailbox.
A voicemail Dialplan App called VoiceMailPlayMsg has been
added to be able to play back a specific message.
Configuration hooks have been added. Configuration hooks
allow for a piece of code to be executed when a specific
configuration file is loaded by a specific module. This is
useful for modules that are dependent on the configuration
of other modules.
chan_sip now has a public method that allows for a custom
SIP INFO request to be sent mid-dialog. Digium phones use
this in order to display progress bars when files are played.
Messaging support has been expanded a bit. The main
visible difference is the addition of an AMI action
MessageSend.
Finally, a ParkingLots manager action has been added in order
to get a list of parking lots.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368435 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The security events framework API was changed in Asterisk 10 but the unit tests
were not updated at the same time.
This patch does the following:
* Adds two more security events that were added to the API
* Add challenge, received_challenge and received_hash in the inval_password
security event unit test
(Closes issue ASTERISK-19760)
Reported by: Michael L. Young
Tested by: Michael L. Young
Patches:
issue-asterisk-19760-trunk.diff uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/1897/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@365248 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r364365 | twilson | 2012-04-27 17:31:01 -0500 (Fri, 27 Apr 2012) | 11 lines
Fix ast_parse_arg numeric type range checking and add tests
ast_parse_arg wasn't checking for strto* parse errors or limiting
the results by the actual range of the numeric types. This patch fixes
that and adds unit tests as well.
Review: https://reviewboard.asterisk.org/r/1879/
........
Merged revisions 364340 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r364369 | twilson | 2012-04-27 17:33:10 -0500 (Fri, 27 Apr 2012) | 2 lines
Add missing test_config.c
........
Merged revisions 364365,364369 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@364397 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Security Events Framework API changed in trunk to support IPv6. This broke
the building of the security events test which was based around IPv4. This
patches fixes the build by changing the test to conform to the new changes.
(related to issue ASTERISK-19447)
Review: https://reviewboard.asterisk.org/r/1874/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362432 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Global ao2 objects must always exist after initialization because there is
no access control to obtain another reference to the global object.
It is expected that module configuration could use these new API calls to
replace an active configuration parameter object with an updated
configuration parameter object.
With these new API calls, the global object could be replaced, removed, or
referenced without the risk of someone using a stale global object
pointer.
Review: https://reviewboard.asterisk.org/r/1824/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360627 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds unit tests for main/jitterbuf.c. This includes checking for
the following:
* Nominal insertion and retrieval of frames
* Insertion and retrieval of frames where the frames are inserted out of
order with respect to the previous frame
* Insertion and retrieval of frames where some number of frames that would
occur in the expected sequence are instead dropped
* Insertion and retrieval of frames with an arrival time that does not occur
at the same rate as the surrounding frames
* Resynchronization of the jitter buffer when an inserted frame breaks the
resynchronization threshold
* Overfilling of the jitter buffer
For each of the tests, both JB_TYPE_VOICE and JB_TYPE_CONTROL permutations
exist.
Review: https://reviewboard.asterisk.org/r/1815
(issue: ASTERISK-18964)
Reported by: Kris Shaw
Tested by: Kris Shaw, Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359406 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change restores functionality that was present in 1.4, when AEL macros
were implemented with the Macro dialplan application. Macros are fraught with
functionality issues, because they consume a large portion of the underlying
application stack. This limits the ability of AEL users to call many layers
of subroutines, an issue which Gosub does not have (originally tested to
100,000 levels deep). Therefore, starting in 1.6.0, AEL macros were
implemented with Gosub.
However, there were some implicit behaviors of Macro, which were not replicated
at the same time as with the transition to Gosub, one of which is documented in
the related issue. In particular, the "h" extension is designed to execute not
in the Macro context, but in the topmost calling context. Due to legacy issues
with a misapplied bugfix many years ago, when a macro exited in 1.4, it looks
in all calling contexts, bubbling up from the deepest level until it finds an
"h" extension.
Since AEL hides the complexity of the underlying dialplan logic from the AEL
programmer, it's reasonable to assume that this behavior should not change in
the transition from Asterisk 1.4 LTS to Asterisk 1.8 LTS, lest we break
working AEL configurations in the transition to Asterisk 1.8 LTS. This fix
is the result, which implements a search for the "h" extension in all calling
Gosub contexts.
Fixes ASTERISK-19336
Patch: 20120308__ael_bugfix_for_trunk__2.diff (License #5003) by Tilghman Lesher
(with slight modifications for 1.8)
Tested by: Johan Wilfer
Review: https://reviewboard.asterisk.org/r/1776/
........
Merged revisions 358810 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 358811 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358812 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change fixes case-sensitivity for device-specific subscriptions such that
the technology identifier is case-insensitive while the remainder of the device
string is still case-sensitive. This should also preserve the original case of
the device string as passed in to the event system. CCSS is the only feature
affected as it is the only consumer of device-specific event subscriptions.
The second part of this patch addresses similar case-sensitivity issues within
CCSS itself that prevented it from functioning correctly after the fix to the
events system.
This adds a unit test to verify that the event system works as expected.
(closes issue ASTERISK-19422)
Review: https://reviewboard.asterisk.org/r/1780/
........
Merged revisions 357940 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 357941 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357942 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Occasionally there is a need to put all objects in one container also into
another container.
Some reasons you might need to do this:
1) You need to reconfigure a container. You would do this by creating a
new container with the new configuration and ao2_container_dup the old
container into it. Then replace the old container with the new. Then
destroy the old container.
2) You need the contents of a container to remain stable while operating
on all of the objects. You would do this by creating a cloned container
of the original with ao2_container_clone. The cloned container is a
snapshot of the objects at the time of the cloning. When done, just
destroy the cloned container.
Review: https://reviewboard.asterisk.org/r/1746/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357145 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Update the doubly linked list implementation. Now safe traversing can
insert before and after the current node when traversing in either
direction.
Updated the linked lists unit test test_linkedlist to also test doubly
linked lists. The old test_dlinkedlist requires a manual check of results
and probably should be removed.
Review: https://reviewboard.asterisk.org/r/1569/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@347110 65c4cc65-6c06-0410-ace0-fbb531ad65f3
AST_LIST_INSERT_BEFORE_CURRENT() could not be used twice in an iteration
or before AST_LIST_REMOVE_CURRENT() without corrupting the list.
AST_LIST_INSERT_BEFORE_CURRENT() could also corrupt the list if
AST_LIST_INSERT_BEFORE_CURRENT() or AST_LIST_REMOVE_CURRENT() is used on
the next iteration.
* Fixed cut and paste error using the wrong variable in
AST_LIST_INSERT_BEFORE_CURRENT().
* Added linked list unit tests for AST_LIST_INSERT_BEFORE_CURRENT(),
AST_LIST_APPEND_LIST(), and AST_LIST_INSERT_LIST_AFTER().
........
Merged revisions 342661 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 342662 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@342663 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r337974 | rmudgett | 2011-09-26 14:35:23 -0500 (Mon, 26 Sep 2011) | 37 lines
Merged revisions 337973 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r337973 | rmudgett | 2011-09-26 14:30:39 -0500 (Mon, 26 Sep 2011) | 30 lines
Fix deadlock when using dummy channels.
Dummy channels created by ast_dummy_channel_alloc() should be destoyed by
ast_channel_unref(). Using ast_channel_release() needlessly grabs the
channel container lock and can cause a deadlock as a result.
* Analyzed use of ast_dummy_channel_alloc() and made use
ast_channel_unref() when done with the dummy channel. (Primary reason for
the reported deadlock.)
* Made app_dial.c:dial_exec_full() not call ast_call() holding any channel
locks. Chan_local could not perform deadlock avoidance correctly.
(Potential deadlock exposed by this issue. Secondary reason for the
reported deadlock since the held lock was part of the deadlock chain.)
* Fixed some uses of ast_dummy_channel_alloc() not checking the returned
channel pointer for failure.
* Fixed some potential chan=NULL pointer usage in func_odbc.c. Protected
by testing the bogus_chan value.
* Fixed needlessly clearing a 1024 char auto array when setting the first
char to zero is enough in manager.c:action_getvar().
(closes issue ASTERISK-18613)
Reported by: Thomas Arimont
Patches:
jira_asterisk_18613_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: Thomas Arimont
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@337975 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r337062 | kmoore | 2011-09-20 16:05:01 -0500 (Tue, 20 Sep 2011) | 18 lines
Merged revisions 337061 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r337061 | kmoore | 2011-09-20 16:04:11 -0500 (Tue, 20 Sep 2011) | 11 lines
Make CANMATCH with the new pattern match engine behave more like the old one
When checking an extension for E_CANMATCH using the new extension matching
algorithm, an exact match was not returned as a possible match resulting in the
queue failing to allow a caller to exit on DTMF. This removes the requirement
that an extension be longer than acquired digits for an E_CANMATCH operation
to succeed.
(closes issue ASTERISK-18044)
Review: https://reviewboard.asterisk.org/r/1367/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@337063 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There is a fairly common pattern making its way through the code base where we
put a temporary object on the stack so we can call ao2_find() with OBJ_POINTER.
The purpose is so that it can be passed into the object hash function.
However, this really seems like a hack and potentially error prone. This patch
is a first stab at approach to avoid having to do that.
It adds a new flag, OBJ_KEY, which can be used instead of OBJ_POINTER in these
situations. Then, the hash function can know whether it was given an object or
some custom data to hash.
The patch also changes some uses of ao2_find() for iax2_user and iax2_peer
objects to reflect how OBJ_KEY would be used.
So long, and thanks for all the fish.
Review: https://reviewboard.asterisk.org/r/1184/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@330273 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r327793 | tilghman | 2011-07-12 10:35:46 -0500 (Tue, 12 Jul 2011) | 14 lines
Use 'printf' (POSIX issue 4) instead of 'echo -n', for portability.
The problem with using 'echo -n' is that it is not portable. While BSD systems
required that the '-n' option be removed and interpreted, System V required
that all strings should be echoed with no interpretation of options. This
fundamental difference of behavior means that it is never possible to use the
'-n' flag to echo in tests which are meant to be portable.
In this case, on Mac OS X 10.6, the /bin/sh shell builtin 'echo' uses the
System V semantics of the command, and thus the SHELL test failed on that
platform.
http://pubs.opengroup.org/onlinepubs/009695399/utilities/echo.html#tag_04_41_16
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@327794 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r327106 | mnicholson | 2011-07-08 14:52:51 -0500 (Fri, 08 Jul 2011) | 11 lines
Reset our ast_str before passing it on to dialplan function backends.
It is possible for a dialplan backend to not modify the given buffer or ast_str
and still return success. This causes any previous value stored in the buffer
to be used as if the new function call provided it. Some functions also append
to the given buffer assuming it is empty.
The test_substitution unit test has also been modified to detect this problem.
(closes issue ASTERISK-17878)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@327107 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There were some bugs in the very ancient version of Berkeley DB that Asterisk
used. Instead of spending the time tracking down the bugs in the Berkeley code
we move to the much better documented SQLite 3.
Conversion of the old astdb happens at runtime by running the included
astdb2sqlite3 utility. The ast_db API with SQLite 3 backend should behave
identically to the old Berkeley backend, but in the future we could offer a
much more robust interface.
We do not include the SQLite 3 library in the source tree, but instead rely
upon the distribution-provided libraries. SQLite is so ubiquitous that this
should not place undue burden on administrators.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@326589 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r324557 | twilson | 2011-06-22 22:10:38 -0500 (Wed, 22 Jun 2011) | 5 lines
Remove tests for parsing address with invalid port
getaddrinfo on OS X returns with EAI_NONAME error when passed a port
greater than 65535. Linux throws no error, so remove the tests for now.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@324558 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r324484 | twilson | 2011-06-22 13:52:04 -0500 (Wed, 22 Jun 2011) | 20 lines
Stop sending IPv6 link-local scope-ids in SIP messages
The idea behind the patch listed below was used, but in a more targeted manner.
There are now address stringification functions for addresses that are meant to
be sent to a remote party. Link-local scope-ids only make sense on the machine
from which they originate and so are stripped in the new functions.
There is also a host sanitization function added to chan_sip which is used
for when peer and dialog tohost fields or sip_registry hostnames are used to
craft a SIP message.
Also added are some basic unit tests for netsock2 address parsing.
(closes issue ASTERISK-17711)
Reported by: ch_djalel
Patches:
asterisk-1.8.3.2-ipv6_ll_scope.patch uploaded by ch_djalel (license 1251)
Review: https://reviewboard.asterisk.org/r/1278/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@324487 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r323669 | rmudgett | 2011-06-15 11:43:18 -0500 (Wed, 15 Jun 2011) | 21 lines
[regression] Voicemail MWI is no longer sent.
When leaving a voicemail, the MWI message is never sent. The same thing
happens when checking a voicemail and marking it as read.
If you restart Asterisk, everything comes up at that state correctly, but
changes to the messages in voicemail causes the light to not be set
appropriately. Very easy to reproduce.
* Made ast_event_check_subscriber() return TRUE if there are ANY
subscribers to an event type when there are no restricting ie values
passed. This allows an event being queued to be queued.
(closes issue ASTERISK-18002)
Reported by: lmadsen
Tested by: lmadsen, irroot
Patches:
jira_asterisk_18002_v1.8.patch uploaded by rmudgett (License #5621)
(closes issue ASTERISK-18019)
........
r323670 | rmudgett | 2011-06-15 11:43:31 -0500 (Wed, 15 Jun 2011) | 7 lines
Add a test to the event unit tests to catch ASTERISK-18002.
The new tests check to see if there are ANY subscribers to the event type
when ast_event_check_subscriber() is not passed any specific ie values.
(issue ASTERISK-18002)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@323671 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r321871 | rmudgett | 2011-06-03 15:58:13 -0500 (Fri, 03 Jun 2011) | 27 lines
Event subscription fixes.
Must commit the subscription fixes together with the integration
subscription tests. The subscription fixes cause an erroneously passing
test to fail. The new subscription tests detect errors without the
subscription fixes.
* Added missing event_names[] table entry.
* Reworked ast_event_check_subscriber()/match_sub_ie_val_to_event() to
correctly detect if a subscriber exists for the proposed event.
* Made match_ie_val() and match_sub_ie_val_to_event() check the buffer
length for RAW payload types.
* Fixed error handling memory leak in ast_event_sub_activate(),
ast_event_unsubscribe(), and ast_event_queue().
* Made ast_event_new() and ast_event_check_subscriber() better protect
themselves from an invalid payload type.
* Added container lock protection between removing old cache events and
adding the new cached event in
ast_event_queue_and_cache()/event_update_cache().
* Added new event subscription tests.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@321872 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the foundation of an entire new way of looking at media in Asterisk.
The code present in this patch is everything required to complete phase1 of my
Media Architecture proposal. For more information about this project visit the link below.
https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal
The primary function of this patch is to convert all the usages of format
bitfields in Asterisk to use the new format and format_cap APIs. Functionally
no change in behavior should be present in this patch. Thanks to twilson
and russell for all the time they spent reviewing these changes.
Review: https://reviewboard.asterisk.org/r/1083/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For each component, the set of valid BNF expansions defines exactly
which characters may appear unescaped. All other characters MUST be
escaped.
This patch modifies ast_uri_encode() to encode strings in line with this recommendation. This patch also adds an ast_escape_quoted() function which escapes '"' and '\' characters in quoted strings in accordance with section 25.1 of RFC 3261. The ast_uri_encode() function has also been modified to take an ast_flags struct describing the set of rules it should use when escaping characters to allow for it to escape SIP URIs in addition to HTTP URIs and other types of URIs or variations of those two URI types in the future.
The ast_uri_decode() function has also been modified to accept an ast_flags struct describing the set of rules to use when decoding to enable decoding '+' as ' ' in legacy http URLs.
The unit tests for these functions have also been updated.
ABE-2705
Review: https://reviewboard.asterisk.org/r/1081/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@303509 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously, I had added the ast_sched_thread stuff that was a generic scheduler
thread implementation. However, if you used it, it required using different
functions for modifying scheduler contents. This patch reworks how this is
done and just allows you to optionally start a thread on the original scheduler
context structure that has always been there. This makes it trivial to switch
to the generic scheduler thread implementation without having to touch any of
the other code that adds or removes scheduler entries.
In passing, I made some naming tweaks to add ast_ prefixes where they were not
there before.
Review: https://reviewboard.asterisk.org/r/1007/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@299091 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r292741 | mmichelson | 2010-10-22 12:09:52 -0500 (Fri, 22 Oct 2010) | 12 lines
Prevent multiple runs of event_sub_test from producing false failure results.
The array of test subscriptions was declared "static," meaning that the
data.count field would retain its value between runs of the test. After the
first test run, this would result in false reports of test failures.
I chose to just remove the "static" keyword from the structure since it's not
a huge deal to construct this structure during each run of the test. Another
alternative would have been to zero out the data.count fields of each test
subscription instead.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292742 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r285931 | tilghman | 2010-09-09 20:25:50 -0500 (Thu, 09 Sep 2010) | 21 lines
Merged revisions 285930 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r285930 | tilghman | 2010-09-09 20:16:32 -0500 (Thu, 09 Sep 2010) | 14 lines
Merged revisions 285889 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r285889 | tilghman | 2010-09-09 19:13:45 -0500 (Thu, 09 Sep 2010) | 7 lines
Fix Mac OS X build.
This also fixes a rather grievous calculation error for the offset of
ast_fdset, which was masked on Linux and FreeBSD, because these platforms
check the first 256 FDs regardless of the bitmask setting (due to backwards
compatibility).
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@285932 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The ACL test was failing on Mac OS X because it would
convert the above invalid link-local address into
fe80::1234 while reporting no error from getaddrinfo().
Linux does not do this.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277872 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ACLs can now be configured to match IPv6 networks. This is only
relevant for ACLs in chan_sip for now since other channel drivers
do not support IPv6 addressing. However, once those channel drivers
are outfitted to support IPv6 addressing, the ACLs will already be
ready for IPv6 support.
https://reviewboard.asterisk.org/r/791
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277814 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The purpose of this patch is to eliminate struct ast_callerid since it has
turned into a miscellaneous collection of various party information.
Eliminate struct ast_callerid and replace it with the following struct
organization:
struct ast_party_name {
char *str;
int char_set;
int presentation;
unsigned char valid;
};
struct ast_party_number {
char *str;
int plan;
int presentation;
unsigned char valid;
};
struct ast_party_subaddress {
char *str;
int type;
unsigned char odd_even_indicator;
unsigned char valid;
};
struct ast_party_id {
struct ast_party_name name;
struct ast_party_number number;
struct ast_party_subaddress subaddress;
char *tag;
};
struct ast_party_dialed {
struct {
char *str;
int plan;
} number;
struct ast_party_subaddress subaddress;
int transit_network_select;
};
struct ast_party_caller {
struct ast_party_id id;
char *ani;
int ani2;
};
The new organization adds some new information as well.
* The party name and number now have their own presentation value that can
be manipulated independently. ISDN supplies the presentation value for
the name and number at different times with the possibility that they
could be different.
* The party name and number now have a valid flag. Before this change the
name or number string could be empty if the presentation were restricted.
Most channel drivers assume that the name or number is then simply not
available instead of indicating that the name or number was restricted.
* The party name now has a character set value. SIP and Q.SIG have the
ability to indicate what character set a name string is using so it could
be presented properly.
* The dialed party now has a numbering plan value that could be useful to
have available.
The various channel drivers will need to be updated to support the new
core features as needed. They have simply been converted to supply
current functionality at this time.
The following items of note were either corrected or enhanced:
* The CONNECTEDLINE() and REDIRECTING() dialplan functions were
consolidated into func_callerid.c to share party id handling code.
* CALLERPRES() is now deprecated because the name and number have their
own presentation values.
* Fixed app_alarmreceiver.c write_metadata(). The workstring[] could
contain garbage. It also can only contain the caller id number so using
ast_callerid_parse() on it is silly. There was also a typo in the
CALLERNAME if test.
* Fixed app_rpt.c using ast_callerid_parse() on the channel's caller id
number string. ast_callerid_parse() alters the given buffer which in this
case is the channel's caller id number string. Then using
ast_shrink_phone_number() could alter it even more.
* Fixed caller ID name and number memory leak in chan_usbradio.c.
* Fixed uninitialized char arrays cid_num[] and cid_name[] in
sig_analog.c.
* Protected access to a caller channel with lock in chan_sip.c.
* Clarified intent of code in app_meetme.c sla_ring_station() and
dial_trunk(). Also made save all caller ID data instead of just the name
and number strings.
* Simplified cdr.c set_one_cid(). It hand coded the ast_callerid_merge()
function.
* Corrected some weirdness with app_privacy.c's use of caller
presentation.
Review: https://reviewboard.asterisk.org/r/702/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276347 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk Generic AOC Representation
- Generic AOC encode/decode routines.
(Generic AOC must be encoded to be passed on the wire in the AST_CONTROL_AOC frame)
- AST_CONTROL_AOC frame type to represent generic encoded AOC data
- Manager events for AOC-S, AOC-D, and AOC-E messages
Asterisk App Support
- app_dial AOC-S pass-through support on call setup
- app_queue AOC-S pass-through support on call setup
AOC Unit Tests
- AOC Unit Tests for encode/decode routines
- AOC Unit Test for manager event representation.
SIP AOC Support
- Pass-through of generic AOC-D and AOC-E messages to snom phones via the
snom AOC specification.
- Creation of chan_sip page3 flags for the addition of the new
'snom_aoc_enabled' sip.conf option.
IAX AOC Support
- Natively supports AOC pass-through through the use of the new
AST_CONTROL_AOC frame type
DAHDI AOC Support
- ETSI PRI full AOC Pass-through support
- 'aoc_enable' chan_dahdi.conf option for independently enabling
pass-through of AOC-S, AOC-D, AOC-E.
- 'aoce_delayhangup' option for retrieving AOC-E on disconnect.
- DAHDI A() dial string option for requesting AOC services.
example usage:
;requests AOC-S, AOC-D, and AOC-E on call setup
exten=>1111,1,Dial(DAHDI/g1/1112/A(s,d,e))
Review: https://reviewboard.asterisk.org/r/552/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@267096 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This will save a considerable amount of CPU on the BSDs, including Mac OS X,
as it eliminates several places in the code that we previously used a busy
loop. Additionally, this adds a res_timing interface, using kqueue timers.
Review: https://reviewboard.asterisk.org/r/543/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@262852 65c4cc65-6c06-0410-ace0-fbb531ad65f3
I modified the original patch for trunk to use the unit test API.
(issue #17277)
Reported by: cappucinoking
Patches:
test_heap.diff uploaded by cappucinoking (license 1036)
Tested by: cappucinoking, russell
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@261500 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch introduces another test in test_event.c that exercises most of the
subscription related ast_event API calls. I made some minor additions to the
existing event allocation test to increase API coverage by the test code.
Finally, I made a list in a comment of API calls not yet touched by the test
module as a to-do list for future test development.
During the development of this test code, I discovered a number of bugs in
the event API.
1) subscriptions to AST_EVENT_ALL were not handled appropriately in a couple
of different places. The API allows a subscription to all event types,
but with IE parameters, just as if it was a subscription to a specific
event type. However, the parameters were being ignored. This affected
ast_event_check_subscriber() and event distribution to subscribers.
2) Some of the logic in ast_event_check_subscriber() for checking subscriptions
against query parameters was wrong.
Review: https://reviewboard.asterisk.org/r/617/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@258632 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are two unit tests contained here.
1. "Invalid ACL" This attempts to read a bunch of badly formatted ACL entries
and add them to a host access rule. The goal of this test is to be sure that
all invalid entries are rejected as they should be.
2. "ACL" This sets up four ACLs. One is a permit all, one is a deny all, and
the other two have specific rules about which subnets are allowed and which
are not. Then a set of test addresses is used to determine whether we would
allow those addresses to access us when each ACL is applied. This test, by the
way, was what resulted in AST-2010-003's creation.
Review: https://reviewboard.asterisk.org/r/532
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@254557 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(Copied from reviewboard)
Tests the following:
1. Basic allocation and setting of string fields.
2. Shrinking a string field and re-expanding it.
3. Growing the last allocation in a string field pool.
4. Setting a string to a large value such that a new string field pool must be
allocated.
In each part, we make sure that the string field is accurate (has the correct
value in it), make sure that the 2 bytes before the string field has the correct
capacity for the field, and for tests 2-4, we make sure that the string field is
where we expect it to be in memory.
Also tested:
5. Shrinking a string field and partially re-expanding it.
6. Setting strings in such a way as to create three separate string field pools
and then removing the middle pool.
There is a bug fix in the init function, which ensures the embedded_pool is set
to NULL which is important for stack allocated structures.
Review: https://reviewboard.asterisk.org/r/185/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@251736 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Current support for regex matching was previously only available on the group.
Also, error reporting for regex failures has been added. In addition to this
feature enhancement a unit test has been written to check the regular expression
logic to ensure the count operation is working as expected.
(closes issue #16642)
Reported by: kobaz
Patches:
groupmatch2.patch uploaded by kobaz (license 834)
Review: https://reviewboard.asterisk.org/r/503/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@247295 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This test works by reading input from arrays to build a sample
dialplan. From there, patterns are attempted to be matched against
said dialplan, with the expected match given. We then search in our
example dialplan to see if we find a match and if what we find matches
what we expected it to match.
(closes issue #16809)
Reported by: lmadsen
Tested by: mmichelson
Review: https://reviewboard.asterisk.org/r/504/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@246942 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This module includes a single test so far that creates events using two
different methods and does some verification on the result to make sure
the correct data can be retrieved from the event that was created.
One bug was found in the event API while developing this test, which makes
me happy. :-)
Review: https://reviewboard.asterisk.org/r/495/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@246260 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1) It occurred to me that the difference in usage between the error ast_str and
the ast_test_update_status() usage has turned out to be a bit ambiguous in
practice. In a lot of cases, the same message was being sent to both.
In other cases, it was only sent to one or the other. My opinion now is that
in every case, I think it makes sense to do both; we should output it to the
CLI as well as save it off for logging purposes.
This change results in most of the changes in this diff, since it required
changes to all existing unit tests. It also allowed for some simplifications
of unit test API implementation code.
2) Update ast_test_status_update() to include the file, function, and line
number for the code providing the update.
3) There are some formatting tweaks here and there. Hopefully they aren't too
distracting for code review purposes. Reviewboard's diff viewer seems to do a
pretty good job of pointing out when something is a whitespace change.
4) I moved the md5_test and sha1_test into the test_utils module. It seemed
like a better approach since these tests are so tiny.
5) I changed the number of nodes used in heap_test_2 from 1 million to
100 thousand. The only reason for this was to reduce the time it took
for this test to run.
6) Remove an unused function prototype that was at the bottom of utils.h.
7) Simplify test_insert() using the LIST_INSERT_SORTALPHA() macro. The one
minor difference in behavior is that it no longer checks for a test registered
with the same name.
8) Expand the code in test_alloc() to provide specific error messages for each
failure case, to clearly inform developers if they forget to set the name,
summary, description, etc.
9) Tweak the output of the "test show registered" CLI command. I swapped the
name and category to have the category first. It seemed more natural since
that is the sort key.
10) Don't output the status ast_str in the "test show results" CLI command.
This is going to tend to be pretty verbose, so just leave that for the
detailed test logs (test generate results).
Review: https://reviewboard.asterisk.org/r/493/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@245864 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1. URI Encoding
This patch changes ast_uri_encode()'s behavior when doreserved is enabled.
Previously when doreserved was enabled only a small set of reserved
characters were encoded. This set was comprised primarily of the reserved
characters defined in RFC3261 section 25.1, but contained other characters as
well. Rather than only escaping the reserved set, doreserved now escapes
all characters not within the unreserved set as defined by RFC 3261 and
RFC 2396. Also, the 'doreserved' variable has been renamed to 'do_special_char'
in attempts to avoid confusion.
When doreserve is not enabled, the previous logic of only encoding the
characters <= 0X1F and > 0X7f remains, except for the '%' character, which
must always be encoded as it signifies a HEX escaped character during the decode
process.
2. URI Decoding: Break up URI before decode.
In chan_sip.c ast_uri_decode is called on the entire URI instead of it's
individual parts after it is parsed. This is not good as ast_uri_decode
can introduce special characters back into the URI which can mess up parsing.
This patch resolves this by not decoding a URI until parsing is completely
done. There are many instances where we check to see if pedantic checking
is enabled before we decode a URI. In these cases a new macro,
SIP_PEDANTIC_DECODE, is used on the individual parsed segments of the URI
rather than constantly putting if (pedantic) { decode() } checks everywhere
in the code. In the areas where ast_uri_decode is not dependent upon
pedantic checking this macro is not used, but decoding is still moved to
each individual part of the URI. The only behavior that should change from
this patch is the time at which decoding occurs.
Since I had to look over every place URI parsing occurs to create this
patch, I found several places where we use duplicate code for parsing.
To consolidate the code, those areas have updated to use the parse_uri()
function where possible.
3. SIP display-name decoding according to RFC3261 section 25.
To properly decode the display-name portion of a FROM header, chan_sip's
get_calleridname() function required a complete re-write. More information
about this change can be found in the comments at the beginning of this function.
4. Unit Tests.
Unit tests for ast_uri_encode, ast_uri_decode, and get_calleridname() have been
written. This involved the addition of the test_utils.c file for testing the
utils api.
(closes issue #16299)
Reported by: wdoekes
Patches:
astsvn-16299-get_calleridname.diff uploaded by wdoekes (license 717)
get_calleridname_rewrite.diff uploaded by dvossel (license 671)
Tested by: wdoekes, dvossel, Nick_Lewis
Review: https://reviewboard.asterisk.org/r/469/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Unit Test Framework is a new API that manages registration and
execution of unit tests in Asterisk with the purpose of verifying the
operation of C functions. The Framework consists of a single test
manager accompanied by a list of registered test functions defined
within the code. A test is defined, registered, and unregistered
from the framework using a set of macros which allow the test code
to only be compiled within asterisk when the TEST_FRAMEWORK flag is
enabled in menuselect. This allows the test code to exist in the
same file as the C functions it intends to verify. Registered tests
may be viewed and executed via a set of new CLI commands. CLI commands
are also present for generating and exporting test results into xml
and txt formats.
For more information and use cases please refer to the documentation
provided at the beginning of the test.h file.
Review: https://reviewboard.asterisk.org/r/447/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@236027 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ami_testhooks.c was registering for AMI events upon module load. Moved the registration
to its own CLI command. Added CLI command for unregistering the hook. Changed some of
the wording, removed unnecessary arguments/parameters.
Reported by: rmudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@228661 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch, originally submitted by jozza, enables custom modules to send actions to AMI
and receive messages from AMI via a hook interface. Included is a simple test module to
illustrate the interface.
(closes issue #14635)
Reported by: jozza
Review: https://reviewboard.asterisk.org/r/412/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@227448 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit introduces the security events API. This API is to be used by
Asterisk components to report events that have security implications.
A simple example is when a connection is made but fails authentication. These
events can be used by external tools manipulate firewall rules or something
similar after detecting unusual activity based on security events.
Inside of Asterisk, the events go through the ast_event API. This means that
they have a binary encoding, and it is easy to write code to subscribe to these
events and do something with them.
One module is provided that is a subscriber to these events - res_security_log.
This module turns security events into a parseable text format and sends them
to the "security" logger level. Using logger.conf, these log entries may be
sent to a file, or to syslog.
One service, AMI, has been fully updated for reporting security events.
AMI was chosen as it was a fairly straight forward service to convert.
The next target will be chan_sip. That will be more complicated and will
be done as its own project as the next phase of security events work.
For more information on the security events framework, see the documentation
generated from doc/tex/. "make asterisk.pdf"
Review: https://reviewboard.asterisk.org/r/273/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@206021 65c4cc65-6c06-0410-ace0-fbb531ad65f3
CEL is the new system for logging channel events. This was inspired after
facing many problems trying to represent what is possible to happen to a call
in Asterisk using CDR records. For more information on CEL, see the built in
HTML or PDF documentation generated from the files in doc/tex/.
Many thanks to Steve Murphy (murf) and Brian Degenhardt (bmd) for their hard
work developing this code. Also, thanks to Matt Nicholson (mnicholson) and
Sean Bright (seanbright) for their assistance in the final push to get this
code ready for Asterisk trunk.
Review: https://reviewboard.asterisk.org/r/239/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203638 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the ability for modules to dynamically create logger levels for their own use; these are named levels just like the built-in levels, and can be directed to any destination that the logger can send any level to, by including their names in logger.conf.
Review: https://reviewboard.asterisk.org/r/244/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@194610 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Correct command description in test_sched.c and include asterisk/cli.h in test_skel.c, since it's highly unlikely that a test module will *not* want to provide CLI commands to execute the tests
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@191997 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This branch adds additional methods to dialplan functions, whereby the result
buffers are now dynamic buffers, which can be expanded to the size of any
result. No longer are variable substitutions limited to 4095 bytes of data.
In addition, the common case of needing buffers much smaller than that will
enable substitution to only take up the amount of memory actually needed.
The existing variable substitution routines are still available, but users
of those API calls should transition to using the dynamic-buffer APIs.
Reviewboard: http://reviewboard.digium.com/r/174/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@191140 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch changes the scheduler to use a max-heap to store pending scheduler
entries instead of a fully sorted doubly linked list. When the number of
entries in the scheduler gets large, this will perform much better. For much
more detailed information on this change, see the review request.
Review: http://reviewboard.digium.com/r/160/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@176639 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Russell Bryant
Kevin P. Fleming
Matthew Jordan
Terry Wilson
Jason Parker
Mark Michelson
Richard Mudgett
Michael L. Young
Tilghman Lesher
Kinsey Moore
Paul Belanger
Leif Madsen
Matthew Nicholson
David Vossel
Tzafrir Cohen
Jeff Peeler
David Brooks
Steve Murphy