3062 Commits (27dc2094e98b59b8a50b059ddd6048285a42e6b9)

Author	SHA1	Message	Date
Mark Michelson	27dc2094e9	res_http_websocket: Debug write lengths. ... Commit 39cc28f6ea attempted to fix a test failure observed on 32 bit test agents by ensuring that a cast from a 32 bit unsigned integer to a 64 bit unsigned integer was happening in a predictable place. As it turns out, this did not cause test runs to succeed. This commit adds several redundant debug messages that print the payload lengths of websocket frames. The idea here is that this commit will not cause tests to succeed for the faulty test agent, but we might deduce where the fault lies more easily this way by observing at what point the expected value (537) changes to some ungangly huge number. If you are wondering why something like this is being committed to the branch, keep in mind that in commit 39cc28f6ea I noted that the observed test failures only happen when automated tests are run. Attempts to run the tests by hand manually on the test agent result in the tests passing. Change-Id: I14a65c19d8af40dadcdbd52348de3b0016e1ae8d	10 years ago
Matt Jordan	1aa23a5d1b	Merge "res_http_websocket: Avoid passing strlen() to ast_websocket_write()." into 13	10 years ago
Mark Michelson	39cc28f6ea	res_http_websocket: Avoid passing strlen() to ast_websocket_write(). ... We have seen a rash of test failures on a 32-bit build agent. Commit 48698a5e21 solved an obvious problem where we were not encoding a 64-bit value correctly over the wire. This commit, however, did not solve the test failures. In the failing tests, ARI is attempting to send a 537 byte text frame over a websocket. When sending a frame this small, 16 bits are all that is required in order to encode the payload length on the websocket frame. However, ast_websocket_write() thinks that the payload length is greater than 65535 and therefore writes out a 64 bit payload length. Inspecting this payload length, the lower 32 bits are exactly what we would expect it to be, 537 in hex. The upper 32 bits, are junk values that are not expected to be there. In the failure, we are passing the result of strlen() to a function that expects a uint64_t parameter to be passed in. strlen() returns a size_t, which on this 32-bit machine is 32 bits wide. Normally, passing a 32-bit unsigned value to somewhere where a 64-bit unsigned value is expected would cause no problems. In fact, in manual runs of failing tests, this works just fine. However, ast_websocket_write() uses the Asterisk optional API, which means that rather than a simple function call, there are a series of macros that are used for its declaration and implementation. These macros may be causing some sort of error to occur when converting from a 32 bit quantity to a 64 bit quantity. This commit changes the logic by making existing ast_websocket_write() calls use ast_websocket_write_string() instead. Within ast_websocket_write_string(), the 64-bit converted strlen is saved in a local variable, and that variable is passed to ast_websocket_write() instead. Note that this commit message is full of speculation rather than certainty. This is because the observed test failures, while always present in automated test runs, never occur when tests are manually attempted on the same test agent. The idea behind this commit is to fix a theoretical issue by performing changes that should, at the least, cause no harm. If it turns out that this change does not fix the failing tests, then this commit should be reverted. Change-Id: I4458dd87d785ca322b89c152b223a540a3d23e67	10 years ago
Mark Duncan	aed068844c	res/res_rtp_asterisk: Add ECDH support ... This will add ECDH support to Asterisk. It will detect auto ECDH support in OpenSSL (1.0.2b and above) during ./configure. If this is available, it will use it, otherwise it will fall back to prime256v1 (this behavior is consistent with other projects such as Apache and nginx). This fixes WebRTC being broken in Firefox 38+ due to Firefox now only supporting ciphers with perfect forward secrecy. ASTERISK-25265 #close Change-Id: I8c13b33a2a79c0bde2e69e4ba6afa5ab9351465b	10 years ago
Mark Michelson	e28fbebc57	Merge "ARI: Rotate log channels." into 13	10 years ago
Benjamin Ford	1ae762634c	ARI: Rotate log channels. ... An http request can be sent to rotate a specified log channel. If the channel does not exist, an error response will be returned. The command "curl -v -u user:pass -X PUT 'http://localhost:8088 /ari/asterisk/logging/logChannelName/rotate'" can be run in the terminal to access this new functionality. * Added the ability to rotate log files through ARI ASTERISK-25252 Change-Id: Iaefa21cbbc1b29effb33004ee3d89c977e76ab01	10 years ago
Richard Mudgett	13eb491e35	res_pjsip_session.c: Fix crashes seen when call cancelled. ... Two testsuite tests crashed in the same place as a result of an INVITE being CANCELed. tests/channels/pjsip/resolver/srv/failover/in_dialog/transport_unspecified tests/channels/pjsip/resolver/srv/failover/in_dialog/transport_tcp The session pointer is no longer in the inv->mod_data[session_module.id] location because the INVITE transaction has reached the terminated state. ASTERISK-25297 #close Reported by: Richard Mudgett Change-Id: Idb75fdca0321f5447d5dac737a632a5f03614427	10 years ago
Mark Michelson	48698a5e21	res_http_websocket: Properly encode 64 bit payload ... A test agent was continuously failing all ARI tests when run against Asterisk 13. As it turns out, the reason for this is that on those test runs, for some reason we decided to use the super extended 64 bit payload length for websocket text frames instead of the extended 16 bit payload length. For 64-bit payloads, the expected byte order over the network is 7, 6, 5, 4, 3, 2, 1, 0 However, we were sending the payload as 3, 2, 1, 0, 7, 6, 5, 4 This meant that we were saying to expect an absolutely MASSIVE payload to arrive. Since we did not follow through on this expected payload size, the client would sit patiently waiting for the rest of the payload to arrive until the test would time out. With this change, we use the htobe64() function instead of htonl() so that a 64-bit byte-swap is performed instead of a 32 bit byte-swap. Change-Id: Ibcd8552392845fbcdd017a8c8c1043b7fe35964a	10 years ago
Joshua Colp	2749721791	pjsip: Add rtp_timeout and rtp_timeout_hold endpoint options. ... This change adds support for the 'rtp_timeout' and 'rtp_timeout_hold' endpoint options. These allow the channel to be hung up if RTP is not received from the remote endpoint for a specified number of seconds. ASTERISK-25259 #close Change-Id: I3f39daaa7da2596b5022737b77799d16204175b9	10 years ago
Mark Michelson	d9094ddd73	res_pjsip: Add rtp_keepalive endpoint option. ... This adds an "rtp_keepalive" option for PJSIP endpoints. Similar to the chan_sip option, this specifies an interval, in seconds, at which we will send RTP comfort noise frames. This can be useful for keeping RTP sessions alive as well as keeping NAT associations alive during lulls. ASTERISK-25242 #close Reported by Mark Michelson Change-Id: I06660ba672c0a343814af4cec838e6025cafd54b	10 years ago
Michael Cargile	a23adcca3d	res/res_musiconhold: Add a warning when MOH does not exist ... Change-Id: Ifdfbd0b97cf31478d29923ec30aabce28d01740b	10 years ago
Matt Jordan	03064daeb2	res/res_sorcery_config: Prevent crash from misconfigured sorcery.conf ... Misconfiguring sorcery.conf with a 'config' wizard with no extra data will currently crash Asterisk on startup, as the wizard requires a comma delineated list to parse. This patch updates res_sorcery_config to check for the presence of the data before it starts manipulating it. Change-Id: I4c97512e8258bc82abe190627a9206c28f5d3847	10 years ago
Matt Jordan	9d7f689b4b	Merge "ARI: Add support for push configuration of dynamic object" into 13	10 years ago
Matt Jordan	8bcf6d2801	ARI: Add support for push configuration of dynamic object ... This patch adds support for push configuration of dynamic, i.e., sorcery, objects in Asterisk. It adds three new REST API calls to the 'asterisk' resource: * GET /asterisk/{configClass}/{objectType}/{id}: retrieve the current object given its ID. This returns back a list of ConfigTuples, which define the fields and their present values that make up the object. * PUT /asterisk/{configClass}/{objectType}/{id}: create or update an object. A body may be passed with the request that contains fields to populate in the object. The same format as what is retrieved using the GET operation is used for the body, save that we specify that the list of fields to update are contained in the "fields" attribute. * DELETE /asterisk/{configClass}/{objectType}/{id}: remove a dynamic object from its backing storage. Note that the success/failure of these operations is somewhat configuration dependent, i.e., you must be using a sorcery wizard that supports the operation in question. If a sorcery wizard does not support the create or delete mechanisms, then the REST API call will fail with a 403 forbidden. ASTERISK-25238 #close Change-Id: I28cd5c7bf6f67f8e9e437ff097f8fd171d30ff5c	10 years ago
Matt Jordan	80eaf0b025	Merge "res_pjsip_session.c: Extract sip_session_defer_termination_stop_timer()." into 13	10 years ago
Matt Jordan	174f0e9d4d	Merge "res_pjsip_session.c: Add some helpful comments and minor tweaks." into 13	10 years ago
Matt Jordan	bba2c44ac4	Merge "res_pjsip_session.c: Fix off nominal crash potential in debug message." into 13	10 years ago
Richard Mudgett	243c0d1609	parking_applications.c: Fix ast_verb() line terminator. ... Change-Id: I8797238c71563e243c48c6145b4f1ae58f91f775	10 years ago
Richard Mudgett	c782320c68	res_parking: Fix crash if ATTENDEDTRANSFER set empty before Park. ... setup_park_common_datastore() was assuming that a non-NULL string returned for the ATTENDEDTRANSFER and BLINDTRANSFER channel variables are not empty strings. Things got crashy as a result. * Made setup_park_common_datastore() treat the channel variable values the same whether they are NULL or empty for ATTENDEDTRANSFER and BLINDTRANSFER. ASTERISK-25254 #close Reported by: Richard Mudgett Change-Id: I9a9c174b33f354f35f82cc6b7cea8303adbaf9c2	10 years ago
Richard Mudgett	2735dd5b2d	res_pjsip_session.c: Extract sip_session_defer_termination_stop_timer(). ... Change-Id: I9e115dee74bd72e06081d0ee73ecdeb886caa5fb	10 years ago
Richard Mudgett	3d0ca343ca	res_pjsip_session.c: Add some helpful comments and minor tweaks. ... Change-Id: I742aeeaf5f760593f323a00fb691affe22e35743	10 years ago
Richard Mudgett	8d08bb179c	res_pjsip_session.c: Fix off nominal crash potential in debug message. ... Change-Id: I09928297927ee85f7655289acee3a586816466bc	10 years ago
Mark Michelson	ca41785774	Merge "ARI: Fixed unload mode for unload module." into 13	10 years ago
Benjamin Ford	3384e64ef6	ARI: Fixed unload mode for unload module. ... Changed the unload mode to AST_FORCE_SOFT from AST_FORCE_FIRM, which would unload a module even if it was in use. * Changed unload mode to proper mode ASTERISK-25173 Change-Id: If2402487b5bce05d9770f25f65f5c8e292ad5533	10 years ago
Matt Jordan	00d858da87	Merge "res_pjsip_session.c: Fix crash on call disconnect." into 13	10 years ago
Matt Jordan	0b6ff77afb	res/res_sorcery_astdb: Add a debugging message for when retrieval by ID fails ... Having a debug message tell us that we attempted to look up an item but failed is nice in circumstances when it isn't clear if the wizard was queried correctly or not. Change-Id: I2600c3bbea87f252196358f62e73f4c7da8632f7	10 years ago
Matt Jordan	2f0d6d346c	res/res_pjsip_outbound_registration: Fix WARNING message ... Newlines are nice. Change-Id: Icf0d915db02882e47cd9077ed9009f5d44140d42	10 years ago
Matt Jordan	cd2213f1ae	res_pjsip/configuration: Fix a variety of default value problems ... This patch fixes some bad default value handling in the following settings: * The 'message_context' and 'accountcode' settings are not mandatory. As such, we can allow their stringfield values to be empty. * The 'media_encryption' setting applies a default value of 'none' to the setting, which it then can't parse or understand. Since the value is documented to be 'no', this will now apply that as the default value. Change-Id: Ib9be7f97a7a5b9bc7aee868edf5acf38774cff83	10 years ago
Richard Mudgett	653f2087e0	res_pjsip_session.c: Fix crash on call disconnect. ... The crash fix for ASTERISK-25183 backported some code from master to try to make sure that a BYE response is processed by the same serializer used by the BYE request. The identified race condition causing that backport was the BYE request code had not finished processing after sending the BYE before the BYE response came in for processing under a different thread. Unfortunately, there is still a race condition. Now the race condition is between destroying the call session's serializer in ast_taskprocessor_unreference() and using ast_taskprocessor_get() to get a reference to the serializer for a BYE response. Even worse, the new race condition is a design limitation of the taskprocessor implementation that didn't matter in versions before v12. Back then, taskprocessors were only destroyed when a module unloaded. Now res_pjsip can destroy them when a call ends. However, as noted on the ASTERISK-25183 commit, session_inv_on_state_changed() is disassociating the dialog from the session when the invite dialog state becomes PJSIP_INV_STATE_DISCONNECTED. This is a tad too soon because our BYE request transaction has not completed yet. * Split session_end() that is called by session_inv_on_state_changed() to hold off session destruction until the BYE transaction timeout occurs or a failed initial INVITE transaction timeout occurs in session_inv_on_tsx_state_changed(). ASTERISK-25201 #close Reported by: Matt Jordan Change-Id: Iaf8dc8485fd8392a2a3ee4ad3b7f7f04a0dcc961	10 years ago
Benjamin Ford	1aafadf814	ARI: Added new functionality to reload a single module. ... An http request can be sent to reload an Asterisk module. If the module can not be reloaded or is not already loaded, an error response will be returned. The command "curl -v -u user:pass -X PUT 'http://localhost:8088 /ari/asterisk/modules/{moduleName}'" (or something similar, based on configuration) can be run in the terminal to access this new functionality. For more information, see: https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource * Added new ARI functionality * Asterisk modules can be reloaded through http requests ASTERISK-25173 Change-Id: I289188bcae182b2083bdbd9ebfffd50b62f58ae1	10 years ago
Benjamin Ford	9dcae23cfc	ARI: Added new functionality to unload a single module. ... An http request can be sent to unload an Asterisk module. If the module can not be unloaded or is already unloaded, an error response will be returned. The command "curl -v -u user:pass -X DELETE 'http://localhost:8088 /ari/asterisk/modules/{moduleName}'" (or something similar, depending on configuration) can be run in the terminal to access this new functionality. For more information, see: https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource * Added new ARI functionality * Asterisk modules can be unloaded through http requests ASTERISK-25173 Change-Id: I535a95f5676deb02651522761ecbdc0b00b5ac57	10 years ago
Benjamin Ford	c219a98d2b	ARI: Added new functionality to load a single module. ... An http request can be sent to load an Asterisk module. If the module can not be loaded or is loaded already, an error response will be returned. The command curl -v -u user:pass -X POST 'http://localhost:8088/ari /asterisk/modules/{moduleName}'" (or something similar, depending on configuration) can be run in the terminal to access this new functionality. For more information, see: https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource * Added new ARI functionality * Asterisk modules can be loaded through http requests ASTERISK-25173 Change-Id: I9e05d5b8c5c666ecfef341504f9edc1aa84fda33	10 years ago
Benjamin Ford	73e35d20de	ARI: Added new functionality to get information on a single module. ... An http request can be sent to retrieve information on a single module, including the resource name, description, use count, status, and support level. The command "curl -v -u user:pass -X GET 'http://localhost:8088/ari /asterisk/modules/{moduleName}'" (or something similar, depending on configuration) can be run in the terminal to access this new functionality. For more information, see: https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource * Added new ARI functionality * Information on a single module can now be retrieved ASTERISK-25173 Change-Id: Ibce5a94e70ecdf4e90329cf0ba66c33a62d37463	10 years ago
Matt Jordan	4a5f23e716	Merge "res/res_sorcery_memory_cache: Fix test registration issues" into 13	10 years ago
Matt Jordan	bee41eec62	res/res_sorcery_memory_cache: Fix test registration issues ... Again, tests now need to not end with a newline. This patch makes it so the tests can register again, unit tests will actually pass, and we can stop wasting time trying to figure out why builds are failing when they really aren't failing. Change-Id: Ide519fbeba89f413c733446c5ff7b224fc4ce840	10 years ago
Matt Jordan	e51d86682a	Merge "ARI: Added new functionality to get all module information." into 13	10 years ago
Benjamin Ford	47ea312b24	ARI: Added new functionality to get all module information. ... An http request can be sent to retrieve a list of all existing modules, including the resource name, description, use count, status, and support level. The command "curl -v -u user:pass -X GET 'http://localhost:8088/ari/ asterisk/modules" (or something similar, depending on configuration) can be run in the terminal to access this new functionality. For more information, see: https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource * Added new ARI functionality * Information on modules can now be retrieved Change-Id: I63cbbf0ec0c3544cc45ed2a588dceabe91c5e0b0	10 years ago
Joshua Colp	b74b071369	res_sorcery_memory_cache: Backport to 13 ... Gerrit is complaining of conflicts when trying to create a patch series of all of the cherry-picked master commits, so I have instead squashed it all into one commit. ASTERISK-25067 #close Reported by: Matt Jordan Change-Id: I6dda90343fae24a75dc5beec84980024e8d61eb9	10 years ago
Joshua Colp	7ff1ac8797	res_rtp_asterisk: Ensure DTLS timeout timer is -1 if DTLS is not used. ... This change fixes a bug where the DTLS timeout timer would be initialized to 0 if DTLS was not used for an RTP session. ASTERISK-25103 Change-Id: If8d26bb054f1d300838850da5b8db9044c2fe2ac	10 years ago
Matt Jordan	b842a8dabf	Merge "res_pjsip_mwi.c: Use safer loop coding in mwi_subscription_mailboxes_str()." into 13	10 years ago
Matt Jordan	84a6ed05b7	Merge "res_pjsip_mwi.c: Fix MWI subscription memory corruption crash." into 13	10 years ago
Joshua Colp	7386a761c1	Merge "PJSIP XML, XPIDF: Fix buffer size overwrite memory corruption error." into 13	10 years ago
Joshua Colp	4c99310468	Merge topic 'res_pjsip_mwi_cleanups' into 13 ... * changes: res_pjsip_mwi.c: Eliminate a simple RAII_VAR. res_pjsip_mwi.c: Fix mid-line log message line breaks.	10 years ago
Joshua Colp	f35d8f5670	Merge "PJSIP FAX: Fix T.38 automatic reject timer NULL channel pointer dereferences." into 13	10 years ago
Joshua Colp	618b97c143	Merge "res_pjsip_t38.c: Fix always false if test." into 13	10 years ago
Joshua Colp	2bc9245d9d	Merge "res_pjsip: Need to use the same serializer for a pjproject SIP transaction." into 13	10 years ago
Joshua Colp	6d4227bbba	Merge "res/res_http_websocket: Don't send HTTP response fragmented." into 13	10 years ago
Joshua Colp	05e8e14982	res_rtp_asterisk: Prevent simultaneous access to DTLS SSL context. ... This change moves logic for setting up the DTLS SSL contexts to when the SDP is done being processed instead of when ICE negotiation completes. It also stops handshakes from being initiated when we are acting as a server. Manipulating the SSL context when ICE negotiation has completed is problematic as the SSL context is not protected and if acting as a client the remote side may have started DTLS negotiation already. The retransmission timeout timer code has also been split up and simplified some. Both RTP and RTCP now have their own timers and the points at which the timer is stopped and started is now more specific. When a packet is sent the timer is started. When a response is received but before it is processed the timer is stopped. This provides a guarantee that the timeout is not occurring while the response is processed. ASTERISK-22805 #close ASTERISK-24550 #close ASTERISK-24651 #close ASTERISK-24832 #close ASTERISK-25103 #close ASTERISK-25127 #close Change-Id: Ib75ea2546f29d6efc3d2d37c58df6986c7bd9b91	10 years ago
Richard Mudgett	38bace4fbb	res_pjsip_t38.c: Fix always false if test. ... Calling t38_change_state() sets the t38 state so it makes little sense to then check the state right after the call for something else. * Made the code in t38_interpret_parameters() reject or exit T.38 mode as intended but not implemented. Change-Id: Ib281263a6ed44da9448132c4e6df1e183b8a3df2	10 years ago
Richard Mudgett	2f7688c788	res_pjsip_mwi.c: Use safer loop coding in mwi_subscription_mailboxes_str(). ... Change-Id: I6f39d809a6d1b47b35bb32b298f5a12f35d6f907	10 years ago