391 Commits (27283a9209c5fdf297989945d78afa1f67866258)

Author	SHA1	Message	Date
Naveen Albert	4f99db350a	chan_dahdi: Clarify scope of callgroup/pickupgroup. ... Internally, chan_dahdi only applies callgroup and pickupgroup to FXO signalled channels, but this is not documented anywhere. This is now documented in the sample config, and a warning is emitted if a user tries configuring these settings for channel types that do not support these settings, since they will not have any effect. Resolves: #294	2 years ago
George Joseph	c8a97d5f8c	file.c: Add ability to search custom dir for sounds ... To better co-exist with sounds files that may be managed by packages, custom sound files may now be placed in AST_DATA_DIR/sounds/custom instead of the standard AST_DATA_DIR/sounds/<lang> directory. If the new "sounds_search_custom_dir" option in asterisk.conf is set to "true", asterisk will search the custom directory for sounds files before searching the standard directory. For performance reasons, the "sounds_search_custom_dir" defaults to "false". Resolves: #315 UserNote: A new option "sounds_search_custom_dir" has been added to asterisk.conf that allows asterisk to search AST_DATA_DIR/sounds/custom for sounds files before searching the standard AST_DATA_DIR/sounds/<lang> directory.	2 years ago
Jaco Kroon	60b529ea00	app_queue: periodic announcement configurable start time. ... This newly introduced periodic-announce-startdelay makes it possible to configure the initial start delay of the first periodic announcement after which periodic-announce-frequency takes over. UserNote: Introduce a new queue configuration option called 'periodic-announce-startdelay' which will vary the normal (historic) behavior of starting the periodic announcement cycle at periodic-announce-frequency seconds after entering the queue to start the periodic announcement cycle at period-announce-startdelay seconds after joining the queue. The default behavior if this config option is not set remains unchanged. Signed-off-by: Jaco Kroon <jaco@uls.co.za>	2 years ago
Naveen Albert	333858fb70	sig_analog: Add Called Subscriber Held capability. ... This adds support for Called Subscriber Held for FXS lines, which allows users to go on hook when receiving a call and resume the call later from another phone on the same line, without disconnecting the call. This is a convenience mechanism that most real PSTN telephone switches support. ASTERISK-30372 #close Resolves: #240 UserNote: Called Subscriber Held is now supported for analog FXS channels, using the calledsubscriberheld option. This allows a station user to go on hook when receiving an incoming call and resume from another phone on the same line by going on hook, without disconnecting the call.	2 years ago
Sean Bright	0bb192831c	extconfig: Allow explicit DB result set ordering to be disabled. ... Added a new boolean configuration flag - `order_multi_row_results_by_initial_column` - to both res_pgsql.conf and res_config_odbc.conf that allows the administrator to disable the explicit `ORDER BY` that was previously being added to all generated SQL statements that returned multiple rows. Fixes: #179	2 years ago
Naveen Albert	c08c458fa2	chan_dahdi: Allow autoreoriginating after hangup. ... Currently, if an FXS channel is still off hook when all calls on the line have hung up, the user is provided reorder tone until going back on hook again. In addition to not reflecting what most commercial switches actually do, it's very common for switches to automatically reoriginate for the user so that dial tone is provided without the user having to depress and release the hookswitch manually. This can increase convenience for users. This behavior is now supported for kewlstart FXS channels. It's supported only for kewlstart (FXOKS) mainly because the behavior doesn't make any sense for ground start channels, and loop start signalling doesn't provide the necessary DAHDI event that makes this easy to implement. Likely almost everyone is using FXOKS over FXOLS anyways since FXOLS is pretty useless these days. ASTERISK-30357 #close Resolves: #224 UserNote: The autoreoriginate setting now allows for kewlstart FXS channels to automatically reoriginate and provide dial tone to the user again after all calls on the line have cleared. This saves users from having to manually hang up and pick up the receiver again before making another call.	2 years ago
Naveen Albert	a670655b7a	sig_analog: Allow three-way flash to time out to silence. ... sig_analog allows users to flash and use the three-way dial tone as a primitive hold function, simply by never timing it out. Some systems allow this dial tone to time out to silence, so the user is not annoyed by a persistent dial tone. This option allows the dial tone to time out normally to silence. ASTERISK-30004 #close Resolves: #205 UserNote: The threewaysilenthold option now allows the three-way dial tone to time out to silence, rather than continuing forever.	2 years ago
Sean Bright	f389d5d4b5	extensions.conf.sample: Remove reference to missing context. ... c3ff4648 removed the [iaxtel700] context but neglected to remove references to it. This commit addresses that and also removes iaxtel and freeworlddialup references from other config files.	2 years ago
Naveen Albert	0d1ddb15db	sig_analog: Allow immediate fake ring to be suppressed. ... When immediate=yes on an FXS channel, sig_analog will start fake audible ringback that continues until the channel is answered. Even if it answers immediately, the ringback is still audible for a brief moment. This can be disruptive and unwanted behavior. This adds an option to disable this behavior, though the default behavior remains unchanged. ASTERISK-30003 #close Resolves: #118 UserNote: The immediatering option can now be set to no to suppress the fake audible ringback provided when immediate=yes on FXS channels.	2 years ago
Nathan Bruning	c88a8aa8b0	app_queue: Add force_longest_waiting_caller option. ... This adds an option 'force_longest_waiting_caller' which changes the global behavior of the queue engine to prevent queue callers from 'jumping ahead' when an agent is in multiple queues. Resolves: #108 Also closes old asterisk issues: - ASTERISK-17732 - ASTERISK-17570 Change-Id: I0f84e27903fefbe2018d0afa2d67b23aa0b321ce	2 years ago
Naveen Albert	2b302e30e4	res_musiconhold: Add option to loop last file. ... Adds the loop_last option to res_musiconhold, which allows the last audio file in the directory to be looped perpetually once reached, rather than circling back to the beginning again. Resolves: #122 ASTERISK-30462 UserNote: The loop_last option in musiconhold.conf now allows the last file in the directory to be looped once reached.	2 years ago
Naveen Albert	f56477a604	sig_analog: Add fuller Caller ID support. ... A previous change, ASTERISK_29991, made it possible to send additional Caller ID parameters that were not previously supported. This change adds support for analog DAHDI channels to now be able to receive these parameters for on-hook Caller ID, in order to enhance the usability of CPE that support these parameters. Resolves: #94 ASTERISK-30331 UserNote: Additional Caller ID properties are now supported on incoming calls to FXS stations, namely the redirecting reason and call qualifier.	2 years ago
Sean Bright	6f218514fb	core: Cleanup gerrit and JIRA references. (#40) ... * Remove .gitreview and switch to pulling the main asterisk branch version from configure.ac instead. * Replace references to JIRA with GitHub. * Other minor cleanup found along the way. Resolves: #39	3 years ago
InterLinked1	5d1dd11143	chan_dahdi: Add dialmode option for FXS lines. (#36) ... Currently, both pulse and tone dialing are always enabled on all FXS lines, with no way of disabling one or the other. In some circumstances, it is desirable or necessary to disable one of these, and this behavior can be problematic. A new "dialmode" option is added which allows setting the methods to support on a per channel basis for FXS (FXO signalled lines). The four options are "both", "pulse", "dtmf"/"tone", and "none". Additionally, integration with the CHANNEL function is added so that this setting can be updated for a channel during a call. Resolves: #35 ASTERISK-29992 UserNote: A "dialmode" option has been added which allows specifying, on a per-channel basis, what methods of subscriber dialing (pulse and/or tone) are permitted. Additionally, this can be changed on a channel at any point during a call using the CHANNEL function.	3 years ago
Joshua Colp	a8ce41b7f7	Revert "app_queue: periodic announcement configurable start time." ... This reverts commit c405630810. Reason for revert: Causes segmentation fault. Change-Id: Ib0c8c592f8d4f0a5e3889aeadfe8bdcde800ba42	3 years ago
Naveen Albert	4e602a1afe	pbx_dundi: Add PJSIP support. ... Adds PJSIP as a supported technology to DUNDi. To facilitate this, we now allow an endpoint to be specified for outgoing PJSIP calls. We also allow users to force a specific channel technology for outgoing SIP-protocol calls. ASTERISK-28109 #close ASTERISK-28233 #close Change-Id: I2e28e5a5d007bd49e3df113ad567b011103899bf	3 years ago
Naveen Albert	f5289a5483	voicemail.conf: Fix incorrect comment about #include. ... A comment at the top of voicemail.conf says that #include cannot be used in voicemail.conf because this breaks the ability for app_voicemail to auto-update passwords. This is factually incorrect, since Asterisk has no problem updating files that are #include'd in the main configuration file, and this does work in voicemail.conf as well. ASTERISK-30479 #close Change-Id: I3bf7d275849ab83f55f7fb6702a75a3077ee1df3	3 years ago
Jaco Kroon	c405630810	app_queue: periodic announcement configurable start time. ... This newly introduced periodic-announce-startdelay makes it possible to configure the initial start delay of the first periodic announcement after which periodic-announce-frequency takes over. ASTERISK-30437 #close Change-Id: Ia79984b6377ef78f167ad9ea2ac084bec29955d0 Signed-off-by: Jaco Kroon <jaco@uls.co.za>	3 years ago
Holger Hans Peter Freyther	2048877889	res_http_media_cache: Introduce options and customize ... Make the existing CURL parameters configurable and allow to specify the usable protocols, proxy and DNS timeout. ASTERISK-30340 Change-Id: I2eb02ef44190e026716720419bcbdbcc8125777b	3 years ago
Sean Bright	7687c75cb6	app_queue: Reset all queue defaults before reload. ... Several queue fields were not being set to their default value during a reload. Additionally added some sample configuration options that were missing from queues.conf.sample. Change-Id: I3a88c7877af91752b1b46a0c087384f7eb9c47e4	3 years ago
Naveen Albert	ec0ca7dcbc	res_pjsip_session: Add overlap_context option. ... Adds the overlap_context option, which can be used to explicitly specify a context to use for overlap dialing extension matches, rather than forcibly using the context configured for the endpoint. ASTERISK-30262 #close Change-Id: Ibbcd4a8b11402428a187fb56b8d4e7408774a0db	3 years ago
Michael Kuron	d73f22268f	res_pjsip_aoc: New module for sending advice-of-charge with chan_pjsip ... chan_sip supported sending AOC-D and AOC-E information in SIP INFO messages in an "AOC" header in a format that was originally defined by Snom. In the meantime, ETSI TS 124 647 introduced an XML-based AOC format that is supported by devices from multiple vendors, including Snom phones with firmware >= 8.4.2 (released in 2010). This commit adds a new res_pjsip_aoc module that inserts AOC information into outgoing messages or sends SIP INFO messages as described below. It also fixes a small issue in res_pjsip_session which didn't always call session supplements on outgoing_response. * AOC-S in the 180/183/200 responses to an INVITE request * AOC-S in SIP INFO (if a 200 response has already been sent or if the INVITE was sent by Asterisk) * AOC-D in SIP INFO * AOC-D in the 200 response to a BYE request (if the client hangs up) * AOC-D in a BYE request (if Asterisk hangs up) * AOC-E in the 200 response to a BYE request (if the client hangs up) * AOC-E in a BYE request (if Asterisk hangs up) The specification defines one more, AOC-S in an INVITE request, which is not implemented here because it is not currently possible in Asterisk to have AOC data ready at this point in call setup. Once specifying AOC-S via the dialplan or passing it through from another SIP channel's INVITE is possible, that might be added. The SIP INFO requests are sent out immediately when the AOC indication is received. The others are inserted into an appropriate outgoing message whenever that is ready to be sent. In the latter case, the XML is stored in a channel variable at the time the AOC indication is received. Depending on where the AOC indications are coming from (e.g. PRI or AMI), it may not always be possible to guarantee that the AOC-E is available in time for the BYE. Successfully tested AOC-D and both variants of AOC-E with a Snom D735 running firmware 10.1.127.10. It does not appear to properly support AOC-S however, so that could only be tested by inspecting SIP traces. ASTERISK-21502 #close Reported-by: Matt Jordan <mjordan@digium.com> Change-Id: Iebb7ad0d5f88526bc6629d3a1f9f11665434d333	3 years ago
Naveen Albert	3babc68099	res_hep: Add support for named capture agents. ... Adds support for the capture agent name field of the Homer protocol to Asterisk by allowing users to specify a name that will be sent to the HEP server. ASTERISK-30322 #close Change-Id: I6136583017f9dd08daeb8be02f60fb8df4639a2b	3 years ago
Naveen Albert	5a78ce5a1f	app_voicemail: Fix missing email in msg_create_from_file. ... msg_create_from_file currently does not dispatch emails, which means that applications using this function, such as MixMonitor, will not trigger notifications to users (only AMI events are sent our currently). This is inconsistent with other ways users can receive voicemail. This is fixed by adding an option that attempts to send an email and falling back to just the notifications as done now if that fails. The existing behavior remains the default. ASTERISK-30283 #close Change-Id: I597cbb9cf971a18d8776172b26ab187dc096a5c7	3 years ago
Mike Bradeen	76d10ea668	manager: prevent file access outside of config dir ... Add live_dangerously flag to manager and use this flag to determine if a configuation file outside of AST_CONFIG_DIR should be read. ASTERISK-30176 Change-Id: I46b26af4047433b49ae5c8a85cb8cda806a07404	3 years ago
Naveen Albert	0bbcda3040	chan_dahdi: Allow FXO channels to start immediately. ... Currently, chan_dahdi will wait for at least one ring before an incoming call can enter the dialplan. This is generally necessary in order to receive the Caller ID spill and/or distinctive ringing detection. However, if neither of these is required, then there is nothing gained by waiting for one ring and this unnecessarily delays call setup. Users can now use immediate=yes to make FXO channels (FXS signaled) begin processing dialplan as soon as Asterisk receives the call. ASTERISK-30305 #close Change-Id: I20818b370b2e4892c7f40c8a8753fa06a81750b5	3 years ago
Henning Westerholt	093593a7c8	res_pjsip: return all codecs on a re-INVITE without SDP ... Currently chan_pjsip on receiving a re-INVITE without SDP will only return the codecs that are previously negotiated and not offering all enabled codecs. This causes interoperability issues with different equipment (e.g. from Cisco) for some of our customers and probably also in other scenarios involving 3PCC infrastructure. According to RFC 3261, section 14.2 we SHOULD return all codecs on a re-INVITE without SDP The PR proposes a new parameter to configure this behaviour: all_codecs_on_empty_reinvite. It includes the code, documentation, alembic migrations, CHANGES file and example configuration additions. ASTERISK-30193 #close Change-Id: I69763708d5039d512f391e296ee8a4d43a1e2148	3 years ago
Naveen Albert	faca1fcfd3	cdr: Allow bridging and dial state changes to be ignored. ... Allows bridging, parking, and dial messages to be globally ignored for all CDRs such that only a single CDR record is generated per channel. This is useful when CDRs should endure for the lifetime of an entire channel and bridging and dial updates in the dialplan should not result in multiple CDR records being created for the call. With the ignore bridging option, bridging changes have no impact on the channel's CDRs. With the ignore dial state option, multiple Dials and their outcomes have no impact on the channel's CDRs. The last disposition on the channel is preserved in the CDR, so the actual disposition of the call remains available. These two options can reduce the amount of "CDR hacks" that have hitherto been necessary to ensure that CDR was not "spoiled" by these messages if that was undesired, such as putting a dummy optimization-disabled local channel between the caller and the actual call and putting the CDR on the channel in the middle to ensure that CDR would persist for the entire call and properly record start, answer, and end times. Enabling these options is desirable when calls correspond to the entire lifetime of channels and the CDR should reflect that. Current default behavior remains unchanged. ASTERISK-30091 #close Change-Id: I393981af42732ec5ac3ff9266444abb453b7c832	3 years ago
George Joseph	7e79d93ed3	res_geolocation: Update wiki documentation ... Also added a note to the geolocation.conf.sample file and added a README to the res/res_geolocation/wiki directory. Change-Id: I89c3c5db8c0701b33127993622d5e4f904bddfbc	3 years ago
Naveen Albert	fdac31f279	app_amd: Add option to play audio during AMD. ... Adds an option that will play an audio file to the party while AMD is running on the channel, so the called party does not just hear silence. ASTERISK-30179 #close Change-Id: I4af306274552b61b3d9f0883c33f698abd4699b6	3 years ago
sungtae kim	2f5cfa548f	res_musiconhold: Add option to not play music on hold on unanswered channels ... This change adds an option, answeredonly, that will prevent music on hold on channels that are not answered. ASTERISK-30135 Change-Id: I1ab0defa43a29a26ae39f94c623596cf90fddc08	3 years ago
Ben Ford	1f685d6969	res_pjsip: Add TEL URI support for basic calls. ... This change allows TEL URI requests to come through for basic calls. The allowed requests are INVITE, ACK, BYE, and CANCEL. The From and To headers will now allow TEL URIs, as well as the request URI. Support is only for TEL URIs present in traffic from a remote party. Asterisk does not generate any TEL URIs on its own. ASTERISK-26894 Change-Id: If5729e6cd583be7acf666373bf9f1b9d653ec29a	3 years ago
Naveen Albert	8c6c06a340	app_confbridge: Add end_marked_any option. ... Adds the end_marked_any option, which can be used to kick a user from a conference if any marked user leaves. ASTERISK-30211 #close Change-Id: I9e8da7ccb892e522546c0f2b5476d172e022c2f5	3 years ago
George Joseph	261051ecec	res_geolocation: Allow location parameters on the profile object ... You can now specify the location object's format, location_info, method, location_source and confidence parameters directly on a profile object for simple scenarios where the location information isn't common with any other profiles. This is mutually exclusive with setting location_reference on the profile. Updated appdocsxml.dtd to allow xi:include in a configObject element. This makes it easier to link to complete configOptions in another object. This is used to add the above fields to the profile object without having to maintain the option descriptions in two places. ASTERISK-30185 Change-Id: Ifd5f05be0a76f0a6ad49fa28d17c394027677569	3 years ago
George Joseph	372f5c56e1	res_geolocation: Add profile parameter suppress_empty_ca_elements ... Added profile parameter "suppress_empty_ca_elements" that will cause Civic Address elements that are empty to be suppressed from the outgoing PIDF-LO document. Fixed a possible SEGV if a sub-parameter value didn't have a value. ASTERISK-30177 Change-Id: I924ccc5aa2f45110a3155b22e53dfaf3ef2092dd	3 years ago
George Joseph	1fc0298f87	res_geolocation: Add built-in profiles ... The trigger to perform outgoing geolocation processing is the presence of a geoloc_outgoing_call_profile on an endpoint. This is intentional so as to not leak location information to destinations that shouldn't receive it. In a totally dynamic configuration scenario however, there may not be any profiles defined in geolocation.conf. This makes it impossible to do outgoing processing without defining a "dummy" profile in the config file. This commit adds 4 built-in profiles: "<prefer_config>" "<discard_config>" "<prefer_incoming>" "<discard_incoming>" The profiles are empty except for having their precedence set and can be set on an endpoint to allow processing without entries in geolocation.conf. "<discard_config>" is actually the best one to use in this situation. ASTERISK-30182 Change-Id: I1819ccfa404ce59802a3a07ad1cabed60fb9480a	3 years ago
Joshua C. Colp	f97e9aed85	pjsip: Add TLS transport reload support for certificate and key. ... This change adds support using the pjsip_tls_transport_restart function for reloading the TLS certificate and key, if the filenames remain unchanged. This is useful for Let's Encrypt and other situations. Note that no restart of the transport will occur if the certificate and key remain unchanged. ASTERISK-30186 Change-Id: I9bc95a6bf791830a9491ad9fa43c17d4010028d0	3 years ago
Naveen Albert	6000f9963c	features: Add transfer initiation options. ... Adds additional control options over the transfer feature functionality to give users more control in how the transfer feature sounds and works. First, the "transfer" sound that plays when a transfer is initiated can now be customized by the user in features.conf, just as with the other transfer sounds. Secondly, the user can now specify the transfer extension in advance by using the TRANSFER_EXTEN variable. If a valid extension is contained in this variable, the call will automatically be transferred to this destination. Otherwise, it will fall back to collecting the extension from the user as is always done now. ASTERISK-29899 #close Change-Id: Ibff309caa459a2b958706f2ed0ca393b1ef502e3	3 years ago
George Joseph	dfedb13eca	res_geolocation: Address user issues, remove complexity, plug leaks ... * Added processing for the 'confidence' element. * Added documentation to some APIs. * removed a lot of complex code related to the very-off-nominal case of needing to process multiple location info sources. * Create a new 'ast_geoloc_eprofile_to_pidf' API that just takes one eprofile instead of a datastore of multiples. * Plugged a huge leak in XML processing that arose from insufficient documentation by the libxml/libxslt authors. * Refactored stylesheets to be more efficient. * Renamed 'profile_action' to 'profile_precedence' to better reflect it's purpose. * Added the config option for 'allow_routing_use' which sets the value of the 'Geolocation-Routing' header. * Removed the GeolocProfileCreate and GeolocProfileDelete dialplan apps. * Changed the GEOLOC_PROFILE dialplan function as follows: * Removed the 'profile' argument. * Automatically create a profile if it doesn't exist. * Delete a profile if 'inheritable' is set to no. * Fixed various bugs and leaks * Updated Asterisk WiKi documentation. ASTERISK-30167 Change-Id: If38c23f26228e96165be161c2f5e849cb8e16fa0	3 years ago
Naveen Albert	d0cd6e82a6	cdr.conf: Remove obsolete app_mysql reference. ... The CDR sample config still mentions that app_mysql is available in the addons directory, but this is incorrect as it was removed as of 19. This removes that to avoid confusion. ASTERISK-30160 #close Change-Id: Ie5293ccb4f2b365896981811b480544e67bb9cd7	3 years ago
Sam Banks	56c6d76a45	queues.conf.sample: Correction of typo ... ASTERISK-30126 #close Change-Id: I009c4dcbf9338a13e3baf87b52a5bbe4f9f81a42	3 years ago
George Joseph	cdbd973ecd	Geolocation: chan_pjsip Capability Preview ... This commit adds res_pjsip_geolocation which gives chan_pjsip the ability to use the core geolocation capabilities. This commit message is intentionally short because this isn't a simple capability. See the documentation at https://wiki.asterisk.org/wiki/display/AST/Geolocation for more information. THE CAPABILITIES IMPLEMENTED HERE MAY CHANGE BASED ON USER FEEDBACK! ASTERISK-30128 Change-Id: Ie2e2bcd87243c2cfabc43eb823d4427c7086f4d9	3 years ago
George Joseph	f491355384	Geolocation: Core Capability Preview ... This commit adds res_geolocation which creates the core capabilities to manipulate Geolocation information on SIP INVITEs. An upcoming commit will add res_pjsip_geolocation which will allow the capabilities to be used with the pjsip channel driver. This commit message is intentionally short because this isn't a simple capability. See the documentation at https://wiki.asterisk.org/wiki/display/AST/Geolocation for more information. THE CAPABILITIES IMPLEMENTED HERE MAY CHANGE BASED ON USER FEEDBACK! ASTERISK-30127 Change-Id: Ibfde963121b1ecf57fd98ee7060c4f0808416303	3 years ago
Naveen Albert	0fe1a581e5	general: Fix various typos. ... ASTERISK-30089 #close Change-Id: I1f5db911fd05a3a211c522c13e990fa1d0e62275	3 years ago
Kevin Harwell	0ddbf6bc45	res_pjsip: allow TLS verification of wildcard cert-bearing servers ... Rightly the use of wildcards in certificates is disallowed in accordance with RFC5922. However, RFC2818 does make some allowances with regards to their use when using subject alt names with DNS name types. As such this patch creates a new setting for TLS transports called 'allow_wildcard_certs', which when it and 'verify_server' are both enabled allows DNS name types, as well as the common name that start with '*.' to match as a wildcard. For instance: *.example.com will match for: foo.example.com Partial matching is not allowed, e.g. f*.example.com, foo.*.com, etc... And the starting wildcard only matches for a single level. For instance: *.example.com will NOT match for: foo.bar.example.com The new setting is disabled by default. ASTERISK-30072 #close Change-Id: If0be3fdab2e09c2a66bb54824fca406ebaac3da4	3 years ago
Naveen Albert	b81fbbc6dc	res_pjsip_outbound_registration: Make max random delay configurable. ... Currently, PJSIP will randomly wait up to 10 seconds for each outbound registration's initial attempt. The reason for this is to avoid having all outbound registrations attempt to register simultaneously. This can create limitations with the test suite where we need to be able to receive inbound calls potentially within 10 seconds of starting up. For instance, we might register to another server and then try to receive a call through the registration, but if the registration hasn't happened yet, this will fail, and hence this inconsistent behavior can cause tests to fail. Ultimately, this requires a smaller random value because there may be no good reason to wait for up to 10 seconds in these circumstances. To address this, a new config option is introduced which makes this maximum delay configurable. This allows, for instance, this to be set to a very small value in test systems to ensure that registrations happen immediately without an unnecessary delay, and can be used more generally to control how "tight" the initial outbound registrations are. ASTERISK-29965 #close Change-Id: Iab989a8e94323e645f3a21cbb6082287c7b2f3fd	3 years ago
Michael Cargile	216a55408e	apps/confbridge: Added hear_own_join_sound option to control who hears sound_join ... Added the hear_own_join_sound option to the confbridge user profile to control who hears the sound_join audio file. When set to 'yes' the user entering the conference and the participants already in the conference will hear the sound_join audio file. When set to 'no' the user entering the conference will not hear the sound_join audio file, but the participants already in the conference will hear the sound_join audio file. ASTERISK-29931 Added by Michael Cargile Change-Id: I856bd66dc0dfa057323860a6418c1371d249abd2	4 years ago
Naveen Albert	cb53ad5671	chan_dahdi: Don't append cadences on dahdi restart. ... Currently, if any custom ring cadences are specified, they are appended to the array of cadences from wherever we left off last time. This works properly the first time, but on subsequent dahdi restarts, it means that the existing cadences are left alone and (most likely) the same cadences are then re-added afterwards. In short order, the cadence array gets maxed out and the user begins seeing warnings that the array is full and no more cadences may be added. This buggy behavior persists until Asterisk is completely restarted; however, if and when dahdi restart is run again, then the same problem is reintroduced. This fixes this behavior so that cadence parsing is more idempotent, that is so running dahdi restart multiple times starts adding cadences from the beginning, rather than from wherever the last cadence was added. As before, it is still not possible to revert to the default cadences by simply removing all cadences in this manner, nor is it possible to delete existing cadences. However, this does make it possible to update existing cadences, which was not possible before, and also ensures that the cadences remain unchanged if the config remains unchanged. ASTERISK-29990 #close Change-Id: Ie32ea3e8a243b766756b1afce684d4a31ee7421d	4 years ago
Mark Petersen	16e59db514	chan_pjsip: add allow_sending_180_after_183 option ... added new global config option "allow_sending_180_after_183" that if enabled will preserve 180 after a 183 ASTERISK-29842 Change-Id: I8a53f8c35595b6d16d8e86e241b5f110d92f3d18	4 years ago
Kevin Harwell	2fb8667908	res_aeap & res_speech_aeap: Add Asterisk External Application Protocol ... Add framework to connect to, and read and write protocol based messages from and to an external application using an Asterisk External Application Protocol (AEAP). This has been divided into several abstractions: 1. transport - base communication layer (currently websocket only) 2. message - AEAP description and data (currently JSON only) 3. transaction - links/binds requests and responses 4. aeap - transport, message, and transaction handler/manager This patch also adds an AEAP implementation for speech to text. Existing speech API callbacks for speech to text have been completed making it possible for Asterisk to connect to a configured external translator service and provide audio for STT. Results can also be received from the external translator, and made available as speech results in Asterisk. Unit tests have also been created that test the AEAP framework, and also the speech to text implementation. ASTERISK-29726 #close Change-Id: Iaa4b259f84aa63501e5fd2a6fb107f900b4d4ed2	4 years ago