........
r369001 | kpfleming | 2012-06-15 10:56:08 -0500 (Fri, 15 Jun 2012) | 11 lines
Add support-level indications to many more source files.
Since we now have tools that scan through the source tree looking for files
with specific support levels, we need to ensure that every file that is
a component of a 'core' or 'extended' module (or the main Asterisk binary)
is explicitly marked with its support level. This patch adds support-level
indications to many more source files in tree, but avoids adding them to
third-party libraries that are included in the tree and to source files
that don't end up involved in Asterisk itself.
........
r369002 | kpfleming | 2012-06-15 10:57:14 -0500 (Fri, 15 Jun 2012) | 3 lines
Add a script to enable finding source files without support-levels defined.
........
Merged revisions 369001-369002 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 369005 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369013 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Hangup now can take a regular expression as the Channel option. If you want
to hangup multiple channels, use /regex/ as the Channel option. Existing
behavior to hanging up a single channel is unchanged, but if you pass a regex,
the manager will send you a list of channels back that were hung up.
(closes issue ASTERISK-19575)
Reported by: Mark Murawski
Tested by: Mark Murawski
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@361038 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Everything still compiled after making these changes, so I assume these
whitespace-only changes didn't break anything (and shouldn't have).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360190 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There exists a remotely exploitable stack buffer overflow in HTTP digest
authentication handling in Asterisk. The particular method in question
is only utilized by HTTP AMI. When parsing the digest information, the
length of the string is not checked when it is copied into temporary buffers
allocated on the stack.
This patch fixes this behavior by parsing out pre-defined key/value pairs
and avoiding unnecessary copies to the stack.
(closes issue ASTERISK-19542)
Reported by: Russell Bryant
Tested by: Matt Jordan
........
Merged revisions 359706 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 359707 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359708 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Integers should always be aligned. For some platforms (ARM, SPARC) this
is more important than for others. This changeset ensures that the
string field string lengths are aligned on *all* platforms, not just on
the SPARC for which there was a workaround. It also fixes that the
length integer can be resized to 32 bits without problems if needed.
(closes issue ASTERISK-17310)
Reported by: radael, S Adrian
Reviewed by: Tzafrir Cohen, Terry Wilson
Tested by: S Adrian
Review: https://reviewboard.asterisk.org/r/1549
........
Merged revisions 343157 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 343158 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@343163 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The ast_string_field_build_va functions were written to take to separate
va_lists to work around FreeBSD 4 not having va_copy defined.
In the end, we don't support anything using gcc < 3 anyway because we use
va_copy all over the place anyway. This patch just simplifies things by
removing the second va_list function arguments in favor of va_copy.
Review: https://reviewboard.asterisk.org/r/1233/
--This line, and those below, will be ignored--
M include/asterisk/stringfields.h
M main/utils.c
M main/channel.c
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@320946 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r316917 | seanbright | 2011-05-04 22:23:28 -0400 (Wed, 04 May 2011) | 5 lines
Make sure that tcptls_session is properly initialized.
(issue #18598)
Reported by: ksn
........
r316918 | seanbright | 2011-05-04 22:25:20 -0400 (Wed, 04 May 2011) | 5 lines
Look at the correct buffer for our digest info instead of an empty one.
(issue #18598)
Reported by: ksn
........
r316919 | seanbright | 2011-05-04 22:30:45 -0400 (Wed, 04 May 2011) | 10 lines
Use the correct HTTP method when generating our digest, otherwise we always fail.
When calculating the 'A2' portion of our digest for verification, we need the
HTTP method that is currently in use. Unfortunately our mapping function was
incorrect, resulting in invalid hashes being generated and, in turn, failures
in authentication.
(closes issue #18598)
Reported by: ksn
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@316920 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r304950 | tilghman | 2011-01-31 00:41:36 -0600 (Mon, 31 Jan 2011) | 18 lines
Change mutex tracking so that it only consumes memory in the core mutex object when it's actually being used.
This reduces the overall size of a mutex which was 3016 bytes before this back
down to 216 bytes (this is on 64-bit Linux with a glibc-implemented mutex).
The exactness of the numbers here may vary slightly based upon how mutexes are
implemented on a platform, but the long and short of it is that prior to this
commit, chan_iax2 held down 98MB of memory on a 64-bit system for nothing more
than a table of 32767 locks. After this commit, the same table occupies a mere
7MB of memory.
(closes issue #18194)
Reported by: job
Patches:
20110124__issue18194.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman
Review: https://reviewboard.asterisk.org/r/1066
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@304951 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For each component, the set of valid BNF expansions defines exactly
which characters may appear unescaped. All other characters MUST be
escaped.
This patch modifies ast_uri_encode() to encode strings in line with this recommendation. This patch also adds an ast_escape_quoted() function which escapes '"' and '\' characters in quoted strings in accordance with section 25.1 of RFC 3261. The ast_uri_encode() function has also been modified to take an ast_flags struct describing the set of rules it should use when escaping characters to allow for it to escape SIP URIs in addition to HTTP URIs and other types of URIs or variations of those two URI types in the future.
The ast_uri_decode() function has also been modified to accept an ast_flags struct describing the set of rules to use when decoding to enable decoding '+' as ' ' in legacy http URLs.
The unit tests for these functions have also been updated.
ABE-2705
Review: https://reviewboard.asterisk.org/r/1081/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@303509 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r302555 | seanbright | 2011-01-19 14:03:32 -0500 (Wed, 19 Jan 2011) | 14 lines
Merged revisions 302554 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r302554 | seanbright | 2011-01-19 14:02:29 -0500 (Wed, 19 Jan 2011) | 7 lines
Don't call strlen() when we only need to look at the next character or two.
(closes issue #18042)
Reported by: wdoekes
Patches:
astsvn-inefficient-ast-uri-decode.patch uploaded by wdoekes (license 717)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@302556 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r298960 | tilghman | 2010-12-17 17:52:04 -0600 (Fri, 17 Dec 2010) | 20 lines
Merged revisions 298957 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r298957 | tilghman | 2010-12-17 17:30:55 -0600 (Fri, 17 Dec 2010) | 13 lines
Merged revisions 298905 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r298905 | tilghman | 2010-12-17 15:40:56 -0600 (Fri, 17 Dec 2010) | 6 lines
Let Asterisk find better backtrace information with libbfd.
The menuselect option BETTER_BACKTRACES, if enabled, will use libbfd to search
for better symbol information within both the Asterisk binary, as well as
loaded modules, to assist when using inline backtraces to track down problems.
Review: https://reviewboard.asterisk.org/r/1055/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@298961 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Already had the pthread ID which is not the same. The most obvious enhancement
is in the "core show threads" output. As stated in the utils header, if the
platform isn't supported -1 is reported (instead of the process ID previously).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@298137 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(Copied from reviewboard)
Tests the following:
1. Basic allocation and setting of string fields.
2. Shrinking a string field and re-expanding it.
3. Growing the last allocation in a string field pool.
4. Setting a string to a large value such that a new string field pool must be
allocated.
In each part, we make sure that the string field is accurate (has the correct
value in it), make sure that the 2 bytes before the string field has the correct
capacity for the field, and for tests 2-4, we make sure that the string field is
where we expect it to be in memory.
Also tested:
5. Shrinking a string field and partially re-expanding it.
6. Setting strings in such a way as to create three separate string field pools
and then removing the middle pool.
There is a bug fix in the init function, which ensures the embedded_pool is set
to NULL which is important for stack allocated structures.
Review: https://reviewboard.asterisk.org/r/185/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@251736 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1. URI Encoding
This patch changes ast_uri_encode()'s behavior when doreserved is enabled.
Previously when doreserved was enabled only a small set of reserved
characters were encoded. This set was comprised primarily of the reserved
characters defined in RFC3261 section 25.1, but contained other characters as
well. Rather than only escaping the reserved set, doreserved now escapes
all characters not within the unreserved set as defined by RFC 3261 and
RFC 2396. Also, the 'doreserved' variable has been renamed to 'do_special_char'
in attempts to avoid confusion.
When doreserve is not enabled, the previous logic of only encoding the
characters <= 0X1F and > 0X7f remains, except for the '%' character, which
must always be encoded as it signifies a HEX escaped character during the decode
process.
2. URI Decoding: Break up URI before decode.
In chan_sip.c ast_uri_decode is called on the entire URI instead of it's
individual parts after it is parsed. This is not good as ast_uri_decode
can introduce special characters back into the URI which can mess up parsing.
This patch resolves this by not decoding a URI until parsing is completely
done. There are many instances where we check to see if pedantic checking
is enabled before we decode a URI. In these cases a new macro,
SIP_PEDANTIC_DECODE, is used on the individual parsed segments of the URI
rather than constantly putting if (pedantic) { decode() } checks everywhere
in the code. In the areas where ast_uri_decode is not dependent upon
pedantic checking this macro is not used, but decoding is still moved to
each individual part of the URI. The only behavior that should change from
this patch is the time at which decoding occurs.
Since I had to look over every place URI parsing occurs to create this
patch, I found several places where we use duplicate code for parsing.
To consolidate the code, those areas have updated to use the parse_uri()
function where possible.
3. SIP display-name decoding according to RFC3261 section 25.
To properly decode the display-name portion of a FROM header, chan_sip's
get_calleridname() function required a complete re-write. More information
about this change can be found in the comments at the beginning of this function.
4. Unit Tests.
Unit tests for ast_uri_encode, ast_uri_decode, and get_calleridname() have been
written. This involved the addition of the test_utils.c file for testing the
utils api.
(closes issue #16299)
Reported by: wdoekes
Patches:
astsvn-16299-get_calleridname.diff uploaded by wdoekes (license 717)
get_calleridname_rewrite.diff uploaded by dvossel (license 671)
Tested by: wdoekes, dvossel, Nick_Lewis
Review: https://reviewboard.asterisk.org/r/469/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk would crash on startup if MALLOC_DEBUG were set in menuselect. This is because
the manager action UpdateConfig had to resize its string field allocation to set the
description. When the resize occurred, ast_copy_string would crash because we were
attempting to copy a string from a NULL pointer. Setting the strings initially makes
the code much less crashy.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@240420 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It is possible for a stringfield manager structure (and pool) structure to be allocated
as part of a larger structure allocation (using ast_calloc_with_strinfields()); when
this is done, the stringfield pool cannot be separately freed, but users of the tructure
may not be aware (and shouldn't have to be aware) of whether the pool was embedded.
This patch modifies the behavior so that they can always call ast_string_field_free_memory()
and the function will do the right thing for both embedded and non-embedded situations.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@197775 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds 'const' tags to a number of Asterisk APIs where they are appropriate (where the API already demanded that the function argument not be modified, but the compiler was not informed of that fact). The list includes:
- CLI command handlers
- CLI command handler arguments
- AGI command handlers
- AGI command handler arguments
- Dialplan application handler arguments
- Speech engine API function arguments
In addition, various file-scope and function-scope constant arrays got 'const' and/or 'static' qualifiers where they were missing.
Review: https://reviewboard.asterisk.org/r/251/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@196072 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit adds an API call that can be used to allocate a structure along with this stringfield storage in a single allocation.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@192362 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Under some conditions, the memory allocation for stringfields and ao2 objects would not have supplied valid file/function names for MALLOC_DEBUG tracking, so this commit corrects that.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@192357 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit modifies the stringfield pool allocator to remember the 'owner' of the stringfield manager the pool is being allocated for, and ensures that pools allocated in the future when fields are populated are owned by that file/function.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@192279 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch provides a number of optimizations to the stringfields API, focused around saving (not wasting) memory whenever possible. Thanks to Mark Michelson for inspiring this work and coming up with the first two optimizations that are represented here:
Changes:
- Cleanup of some code, fix incorrect doxygen comments
- When a field is emptied or replaced with a new allocation, decrease the amount of 'active' space in the pool it was held in; if that pool reaches zero active space, and is not the current pool, then free it as it is no longer in use
- When allocating a pool, try to allocate a size that will fit in a 'standard' malloc() allocation without wasting space
- When allocating space for a field, store the amount of space in the two bytes immediately preceding the field; this eliminates the need to call strlen() on the field when overwriting it, and more importantly it 'remembers' the amount of space the field has available, even if a shorter string has been stored in it since it was allocated
- Don't automatically double the size of each successive pool allocated; it's wasteful
http://reviewboard.digium.com/r/165/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@185581 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r182810 | russell | 2009-03-17 21:09:13 -0500 (Tue, 17 Mar 2009) | 44 lines
Fix cases where the internal poll() was not being used when it needed to be.
We have seen a number of problems caused by poll() not working properly on
Mac OSX. If you search around, you'll find a number of references to using
select() instead of poll() to work around these issues. In Asterisk, we've
had poll.c which implements poll() using select() internally. However, we
were still getting reports of problems.
vadim investigated a bit and realized that at least on his system, even
though we were compiling in poll.o, the system poll() was still being used.
So, the primary purpose of this patch is to ensure that we're using the
internal poll() when we want it to be used.
The changes are:
1) Remove logic for when internal poll should be used from the Makefile.
Instead, put it in the configure script. The logic in the configure
script is the same as it was in the Makefile. Ideally, we would have
a functionality test for the problem, but that's not actually possible,
since we would have to be able to run an application on the _target_
system to test poll() behavior.
2) Always include poll.o in the build, but it will be empty if AST_POLL_COMPAT
is not defined.
3) Change uses of poll() throughout the source tree to ast_poll(). I feel
that it is good practice to give the API call a new name when we are
changing its behavior and not using the system version directly in all cases.
So, normally, ast_poll() is just redefined to poll(). On systems where
AST_POLL_COMPAT is defined, ast_poll() is redefined to ast_internal_poll().
4) Change poll() in main/poll.c to be ast_internal_poll().
It's worth noting that any code that still uses poll() directly will work fine
(if they worked fine before). So, for example, out of tree modules that are
using poll() will not stop working or anything. However, for modules to work
properly on Mac OSX, ast_poll() needs to be used.
(closes issue #13404)
Reported by: agalbraith
Tested by: russell, vadim
http://reviewboard.digium.com/r/198/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@182847 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r176216 | kpfleming | 2009-02-16 15:10:38 -0600 (Mon, 16 Feb 2009) | 3 lines
fix a flaw in the ast_string_field_build() family of API calls; these functions made no attempt to reuse the space already allocated to a field, so every time the field was written it would allocate new space, leading to what appeared to be a memory leak.
........
r176254 | kpfleming | 2009-02-16 15:41:46 -0600 (Mon, 16 Feb 2009) | 3 lines
correct a logic error in the last stringfields commit... don't mark additional space as allocated if the string was built using already-allocated space
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@176255 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch introduces a function to do careful writes on a file stream which
will handle timeouts and partial writes. It is currently used in AMI to
address the issue that has been reported. However, there are probably a few
other places where this could be used.
(closes issue #13546)
Reported by: srt
Tested by: russell
http://reviewboard.digium.com/r/104/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@166282 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r165796 | russell | 2008-12-18 15:39:25 -0600 (Thu, 18 Dec 2008) | 11 lines
Make ast_carefulwrite() be more careful.
This patch handles some additional cases that could result in partial writes
to the file description. This was done to address complaints about partial
writes on AMI.
(issue #13546) (more changes needed to address potential problems in 1.6)
Reported by: srt
Tested by: russell
Review: http://reviewboard.digium.com/r/99/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@165801 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r164881 | russell | 2008-12-16 15:38:29 -0600 (Tue, 16 Dec 2008) | 9 lines
Fix an issue where DEBUG_THREADS may erroneously report that a thread
is exiting while holding a lock.
If the last lock attempt was a trylock, and it failed, it will still be in the
list of locks so that it can be reported.
(closes issue #13219)
Reported by: pj
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@164882 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Kevin P. Fleming
Richard Mudgett
Joshua Colp
Mark Murawki
Jonathan Rose
Kinsey Moore
Matthew Jordan
Walter Doekes
Terry Wilson
Sean Bright
Alec L Davis
Tilghman Lesher
Matthew Nicholson
Jeff Peeler
Tzafrir Cohen
David Vossel
Mark Michelson
Russell Bryant
Michiel van Baak
Doug Bailey