Correct typos of the following word families:
standard
increase
comments
valgrind
promiscuous
editing
libtonezone
storage
aggressive
whitespace
russellbryant
consecutive
peternixon
ASTERISK-29714
Change-Id: I9cafbf41b579c9c0c84c81719d2c4f900beec245
In res_pjsip_sdp_rtp, the bind_rtp_to_media_address option and the
fallback use of the transport's bind address solve problems sending
media on systems that cannot send ipv4 packets on ipv6 sockets, and
certain other situations. This change extends both of these behaviors
to UDPTL sessions as well in res_pjsip_t38, to fix fax-specific
problems on these systems, introducing a new option
endpoint/t38_bind_udptl_to_media_address.
ASTERISK-29402
Change-Id: I87220c0e9cdd2fe9d156846cb906debe08c63557
The behavior of max_contacts and remove_existing are connected. If
remove_existing is enabled, the soonest expiring contacts are removed.
This may occur when there is an unavailable contact. Similarly,
when remove_existing is not enabled, registrations from good
endpoints are rejected in favor of retaining unavailable contacts.
This commit adds a new AOR option remove_unavailable, and the effect
of this setting will depend on remove_existing. If remove_existing
is set to no, we will still remove unavailable contacts when they
exceed max_contacts, if there are any. If remove_existing is set to
yes, we will prioritize the removal of unavailable contacts before
those that are expiring soonest.
ASTERISK-29525
Change-Id: Ia2711b08f2b4d1177411b1be23e970d7fdff5784
Implemention of History-Info capable of interworking with Diversion
Header following RFC7544
ASTERISK-29027 #close
Change-Id: I2296369582d4b295c5ea1e60bec391dd1d318fa6
Currently, the ps_contacts table's reg_server column in realtime database type is varchar(20).
This is fine for normal cases, but if the hostname is longer than 20, it returns error and then
failed to register the contact address of the peer.
Normally, 20 characters limitation for the hostname is fine, but with the cloud env.
So, increased the size to 255.
ASTERISK-29056
Change-Id: Iac52c8c35030303cfa551bb39f410b33bffc507d
This change renames the codec preference endpoint options.
incoming_offer_codec_prefs becomes codec_prefs_incoming_offer
to keep the options together when showing an endpoint.
Change-Id: I6202965b4723777f22a83afcbbafcdafb1d11c8d
Added a new configuration option for PJSIP endpoints - stir_shaken. If
set to yes, then STIR/SHAKEN support will be added to inbound and
outbound INVITEs. The default is no. Alembic has been updated to include
this option.
Previously the dialplan function was not trimming the whitespace from
the parameters it recieved. Now it does.
Also added a conditional that, when TEST_FRAMEWORK is enabled, the
timestamp in the identity header will be overlooked. This is just for
testing, since the testsuite will rely on a SIPp scenario with a preset
identity header to trigger the MISMATCH result.
Change-Id: I43d67f1489b8c1c5729ed3ca8d71e35ddf438df1
This commit adds the endpoint options required to control
Advanced Codec Negotiation.
incoming_offer_codec_prefs
outgoing_offer_codec_prefs
incoming_answer_codec_prefs
outgoing_answer_codec_prefs
The documentation may need tweaking and some additional edits
added, especially for the "answer" prefs. That'll be handled
when things finalize.
This commit is safe to merge as it doens't alter any existing
functionality nor does it alter the previous codec negotiation
work which may now be obsolete.
Change-Id: I920ba925d7dd36430dfd2ebd9d82d23f123d0e11
Currently when the pjsip making an outgoing request, it keep adding the
rport parameter in a request message as a default.
This causes unexpected rport handle at the other end.
Added option for disable this behaviour in the pjsip.conf.
This is a system option, but working as a gloabl option.
ASTERISK-28959
Change-Id: I9596675e52a742774738b5aad5d1fec32f477abc
Allow the list of files to be played to be provided explicitly in the
music class's configuration. The primary driver for this change is to
allow URLs to be used for MoH.
Change-Id: I9f43b80b43880980b18b2bee26ec09429d0b92fa
Added a new PJSIP global setting called norefersub.
Default is true to keep support working as before.
res_pjsip_refer: Configures PJSIP norefersub capability accordingly.
Checks the PJSIP global setting value.
If it is true (default) it adds the norefersub capability to PJSIP.
If it is false (disabled) it does not add the norefersub capability
to PJSIP.
This is useful for Cisco switches that do not follow RFC4488.
ASTERISK-28375 #close
Reported-by: Dan Cropp
Change-Id: I0b1c28ebc905d881f4a16e752715487a688b30e9
When trying to upgrade using alembic, a couple different errors kept
popping up that prevented the upgrade. An additional parameter was
needed when changing the schema for mwi_subscribe_replaces_unsolicited
from an integer to an enum. When changing from a string to an enum, the
type needed to be cast for postgresql. The other issue was a parameter
being used during column creation that did not exist.
After fixing the upgrade process, it revealed errors with the downgrade
process. One was a variable not being defined in the downgrade function,
and the other was tables not existing when using MySQL. This was due to
a context check that should have encompassed MySQL, but in the end was
not doing so.
Change-Id: Ib4d70cf3ce5080023a50be496272a777b55d6c8e
chan_sip will always ignore 183 responses that do not contain SDP
however, chan_pjsip will currently always translate it into a
183 with SDP. This new flag allows chan_pjsip to have the same
behavior as chan_sip.
ASTERISK-28322 #close
Change-Id: If81cfaa17c11b6ac703e3d71696f259d86c6be4a
To prevent one subsystem's taskprocessors from causing others
to stall, new capabilities have been added to taskprocessors.
* Any taskprocessor name that has a '/' will have the part
before the '/' saved as its "subsystem".
Examples:
"sorcery/acl-0000006a" and "sorcery/aor-00000019"
will be grouped to subsystem "sorcery".
"pjsip/distributor-00000025" and "pjsip/distributor-00000026"
will bn grouped to subsystem "pjsip".
Taskprocessors with no '/' have an empty subsystem.
* When a taskprocessor enters high-water alert status and it
has a non-empty subsystem, the subsystem alert count will
be incremented.
* When a taskprocessor leaves high-water alert status and it
has a non-empty subsystem, the subsystem alert count will be
decremented.
* A new api ast_taskprocessor_get_subsystem_alert() has been
added that returns the number of taskprocessors in alert for
the subsystem.
* A new CLI command "core show taskprocessor alerted subsystems"
has been added.
* A new unit test was addded.
REMINDER: The taskprocessor code itself doesn't take any action
based on high-water alerts or overloading. It's up to taskprocessor
users to check and take action themselves. Currently only the pjsip
distributor does this.
* A new pjsip/global option "taskprocessor_overload_trigger"
has been added that allows the user to select the trigger
mechanism the distributor uses to pause accepting new requests.
"none": Don't pause on any overload condition.
"global": Pause on ANY taskprocessor overload (the default and
current behavior)
"pjsip_only": Pause only on pjsip taskprocessor overloads.
* The core pjsip pool was renamed from "SIP" to "pjsip" so it can
be properly grouped into the "pjsip" subsystem.
* stasis taskprocessor names were changed to "stasis" as the
subsystem.
* Sorcery core taskprocessor names were changed to "sorcery" to
match the object taskprocessors.
Change-Id: I8c19068bb2fc26610a9f0b8624bdf577a04fcd56
The commit I2f97ebfa79969a36a97bb7b9afd5b6268cf1a07d removed sending out
the ContactStatus AMI event when a contact is updated.
Thist change broke things which rely on old behavior.
This patch adds a new PJSIP global configuration option
'send_contact_status_on_update_registration' to be able to preserve old
ContactStatus behavior.
By default new behavior, i.e. the ContactStatus event will not be sent when a
device refreshes its registration.
Change-Id: I706adf7584e7077eb6bde6d9799ca408bc82ce46
This patch adds new options 'trust_connected_line' and 'send_connected_line'
to the endpoint.
The option 'trust_connected_line' is to control if connected line updates
are accepted from this endpoint.
The option 'send_connected_line' is to control if connected line updates
can be sent to this endpoint.
The default value is 'yes' for both options.
Change-Id: I16af967815efd904597ec2f033337e4333d097cd
Add a new global flag to res_pjsip to allow the callerid to be used
as the username in the contact header. This allows chan_pjsip to have
the same behavour as chan_sip
ASTERISK-28087 #close
Change-Id: I9a720e058323f6862a91c62f8a8c1a4b5c087b95
This change implements a few different generic things which were brought
on by Google Voice SIP.
1. The concept of flow transports have been introduced. These are
configurable transports in pjsip.conf which can be used to reference a
flow of signaling to a target. These have runtime configuration that can
be changed by the signaling itself (such as Service-Routes and
P-Preferred-Identity). When used these guarantee an individual connection
(in the case of TCP or TLS) even if multiple flow transports exist to the
same target.
2. Service-Routes (RFC 3608) support has been added to the outbound
registration module which when received will be stored on the flow
transport and used for requests referencing it.
3. P-Associated-URI / P-Preferred-Identity (RFC 3325) support has been
added to the outbound registration module. If a P-Associated-URI header
is received it will be used on requests as the P-Preferred-Identity.
4. Configurable outbound extension support has been added to the outbound
registration module. When set the extension will be placed in the
Supported header.
5. Header parameters can now be configured on an outbound registration
which will be placed in the Contact header.
6. Google specific OAuth / Bearer token authentication
(draft-ietf-sipcore-sip-authn-02) has been added to the outbound
registration module.
All functionality changes are controlled by pjsip.conf configuration
options and do not affect non-configured pjsip endpoints otherwise.
ASTERISK-27971 #close
Change-Id: Id214c2d1c550a41fcf564b7df8f3da7be565bd58
In the original commit introducing the feature the column in the alembic
script was called 'suppress_q850_reason_header'.
In the code however the option is called 'suppress_q850_reason_headers'
(trailing 's'). This leads to errors when ARI push configuration is used.
Change-Id: Ie84808adbca6fcc9136556e4f5d741adbef5d14f
When mobile SIP clients register with Asterisk that use some sort of
push notifications, the URI can get quite lengthy due to the
additional push-service annotations (things like tokens, pn-type, etc.)
contained in it.
ASTERISK-28022 #close
Change-Id: I4c7ceadc3bb405f3daf722641c8cd5ca4188cc37
A new option 'suppress_q850_reason_headers' has been added to the
endpoint object. Some devices can't accept multiple Reason headers and
get confused when both 'SIP' and 'Q.850' Reason headers are received.
This option allows the 'Q.850' Reason header to be suppressed.
The default value is 'no'.
ASTERISK-27949
Reported-by: Ross Beer
Change-Id: I54cf37a827d77de2079256bb3de7e90fa5e1deb1
pjproject by default currently will follow media forked during an INVITE
on outbound calls if the To tag is different on a subsequent response as
that on an earlier response. We handle this correctly. There have
been reported cases where the To tag is the same but we still need to
follow the media. The pjproject patch in this commit adds the
capability to sip_inv and also adds the capability to control it at
runtime. The original "different tag" behavior was always controllable
at runtime but we never did anything with it and left it to default to
TRUE.
So, along with the pjproject patch, this commit adds options to both the
system and endpoint objects to control the two behaviors, and a small
logic change to session_inv_on_media_update in res_pjsip_session to
control the behavior at the endpoint level.
The default behavior for "different tags" remains the same at TRUE and
the default for "same tag" is FALSE.
Change-Id: I64d071942b79adb2f0a4e13137389b19404fe3d6
ASTERISK-27936
Reported-by: Ross Beer
In an earlier release, inbound registrations on a reliable transport
were pruned on Asterisk restart since the TCP connection would have
been torn down and become unusable when Asterisk stopped. This same
process is now also applied to inbound subscriptions.
Also fixed issues in res_pjsip_registrar where it wasn't handling the
monitoring correctly when multiple registrations came in over the same
transport.
To accomplish this, the pjsip_transport_event feature needed to
be refactored to allow multiple monitors (multiple subcriptions or
registrations from the same endpoint) to exist on the same transport.
Since this changed the API, any external modules that may have used the
transport monitor feature (highly unlikey) will need to be changed.
ASTERISK-27612
Reported by: Ross Beer
Change-Id: Iee87cf4eb9b7b2b93d5739a72af52d6ca8fbbe36
The type=identify endpoint identification method can match by IP address
and by SIP header. However, the SIP header matching has limited
usefulness because you cannot specify the SIP header matching priority
relative to the IP address matching. All the matching happens at the same
priority and the order of evaluating the identify sections is
indeterminate. e.g., If you had two type=identify sections where one
matches by IP address for endpoint alice and the other matches by SIP
header for endpoint bob then you couldn't predict which endpoint is
matched when a request comes in that matches both.
* Extract the SIP header matching criteria into its own "header" endpoint
identification method so the user can specify the relative priority of the
SIP header and the IP address matching criteria in the global
endpoint_identifier_order option. The "ip" endpoint identification method
now only matches by IP address.
ASTERISK-27491
Change-Id: I9df142a575b7e1e3471b7cda5d3ea156cef08095
This patch adds the ability to set the wrapuptime on the queue member
config.
When the option is set the wrapuptime on the queue member is used instead
of the queue's wrapuptime.
ASTERISK-27483 #close
Change-Id: I11c85809537f974eb44dc5bbf82bcedd8a458902
This mimics the behavior of Chrome and Firefox and creates an ephemeral
X.509 certificate for each DTLS session.
Currently, the only supported key type is ECDSA because of its faster
generation time, but other key types can be added in the future as
necessary.
ASTERISK-27395
Change-Id: I5122e5f4b83c6320cc17407a187fcf491daf30b4
The ps_endpoints table was missing the bundle column
introduced with the bundle feature in
commit 065c3005ad.
ASTERISK-27374 #close
Change-Id: Ic900f4f2c20f64b99ea898d50f5c0a7117472d46
When the identify_by option on an endpoint is set to ip it will
only be identified using the res_pjsip_endpoint_identifier_ip module.
This ensures that it is not mistakenly matched using the username of
the From header. To ensure behavior has not changed the default has
been changed to "username,ip" for the identify_by option.
ASTERISK-27206
Change-Id: I2170b86a7f7e221b4f00bf14aa1ef1ac5b050bbd
A new endpoint parameter "incoming_mwi_mailbox" allows Asterisk to
receive unsolicited MWI NOTIFY requests and make them available to
other modules via the stasis message bus.
res_pjsip_pubsub has a new handler "pubsub_on_rx_mwi_notify_request"
that parses a simple-message-summary body and, if
endpoint->incoming_mwi_account is set, calls ast_publish_mwi_state
with the voice-message counts from the message.
Change-Id: I08bae3d16e77af48fcccc2c936acce8fc0ef0f3c
MS-SQL has no native Enum-type support and therefore
needs to work with constraints.
Since these constraints need unique names the suggested approach
referenced in the following alembic documentation has been applied:
http://bit.ly/2x9r8pb
ASTERISK-27255 #close
Change-Id: I8b579750dae0c549f1103ee50172644afb9b2f95
Added include for postgresql ENUM type and
redefined values in the same way as in the
other migration scripts.
ASTERISK-27254 #close
Change-Id: Id667304cdf3891b1c2f7d35fab3e2a84026159fa
The ps_endpoints table was missing the dtls_fingerprint column
introduced with commit adba2a8d7f.
ASTERISK-27168 #close
Change-Id: I9cb5006f7f50718b5239919562773adabb334cfd
The fix for the issue is broken up into three parts.
This is part two which handles the server side of REGISTER requests when
rewrite_contact is enabled. Any registered reliable transport contact
becomes invalid when the transport connection becomes disconnected.
* Monitor the rewrite_contact's reliable transport REGISTER contact for
shutdown. If it is shutdown then the contact must be removed because it
is no longer valid. Otherwise, when the client attempts to re-REGISTER it
may be blocked because the invalid contact is there. Also if we try to
send a call to the endpoint using the invalid contact then the endpoint is
not likely to see the request. The endpoint either won't be listening on
that port for new connections or a NAT/firewall will block it.
* Prune any rewrite_contact's registered reliable transport contacts on
boot. The reliable transport no longer exists so the contact is invalid.
* Websockets always rewrite the REGISTER contact address and the transport
needs to be monitored for shutdown.
* Made the websocket transport set a unique name since that is what we use
as the ao2 container key. Otherwise, we would not know which transport we
find when one of them shuts down. The names are also used for PJPROJECT
debug logging.
* Made the websocket transport post the PJSIP_TP_STATE_CONNECTED state
event. Now the global keep_alive_interval option, initially idle shutdown
timer, and the server REGISTER contact monitor can work on wetsocket
transports.
* Made the websocket transport set the PJSIP_TP_DIR_INCOMING direction.
Now initially idle websockets will automatically shutdown.
ASTERISK-27147
Change-Id: I397a5e7d18476830f7ffe1726adf9ee6c15964f4
When the "webrtc" option was added in res_pjsip it was not added to the alembic
scripts. This patch adds the option for alembic.
Also, changed the sorcery configuration type to an OPT_YESNO_T value instead of
an OPT_BOOL_T so if this field is ever written to a database it will write out
the correct value.
ASTERISK-27119 #close
Change-Id: I3e199f060aea25e193c439fc5cf96be4d3ed1c7b
The existing auto dtmf mode reverts to inband if 4733 fails to be
negotiated. This patch adds a new mode auto_info which will
switch to INFO instead of inband if 4733 is not available.
ASTERISK-27066 #close
Change-Id: Id185b11e84afd9191a2f269e8443019047765e91
The stream topology (list of streams and order) is now stored with the
configured PJSIP endpoints and used during the negotiation process.
Media negotiation state information has been changed to be stored
in a separate object. Two of these objects exist at any one time
on a session. The active media state information is what was previously
negotiated and the pending media state information is what the
media state will become if negotiation succeeds. Streams and other
state information is stored in this object using the index (or
position) of each individual stream for easy lookup.
The ability for a media type handler to specify a callback for
writing has been added as well as the ability to add file
descriptors with a callback which is invoked when data is available
to be read on them. This allows media logic to live outside of
the chan_pjsip module.
Direct media has been changed so that only the first audio and
video stream are directly connected. In the future once the RTP
engine glue API has been updated to know about streams each individual
stream can be directly connected as appropriate.
Media negotiation itself will currently answer all the provided streams
on an offer within configured limits and on an offer will use the
topology created as a result of the disallow/allow codec lines.
If a stream has been removed or declined we will now mark it as such
within the resulting SDP.
Applications can now also request that the stream topology change.
If we are told to do so we will limit any provided formats to the ones
configured on the endpoint and send a re-invite with the new topology.
Two new configuration options have also been added to PJSIP endpoints:
max_audio_streams: determines the maximum number of audio streams to
offer/accept from an endpoint. Defaults to 1.
max_video_streams: determines the maximum number of video streams to
offer/accept from an endpoint. Defaults to 1.
ASTERISK-27076
Change-Id: I8afd8dd2eb538806a39b887af0abd046266e14c7
This option was added to control whether to notify dialog-info state
'early' or 'confirmed' on Ringing when already INUSE.
The value "yes" is useful for some SIP phones (Cisco SPA)
to be able to indicate and pick up ringing devices.
ASTERISK-26919 #close
Change-Id: Ie050bc30023543c7dfb4365c5be3ce58c738c711
Josh Soref
Matthew Kern
Joseph Nadiv
Sean Bright
Torrey Searle
Sungtae Kim
George Joseph
Ben Ford
Rodrigo Ramírez Norambuena
Dan Cropp
Torrey Searle
Alexei Gradinari
Kevin Harwell
Richard Mudgett
Nick French
Florian Floimair
Joshua Colp
Jenkins2
Mark Michelson