256 Commits (2381ddde63489b8601c9514111838fb4656610b4)

Author	SHA1	Message	Date
zuul	2dc23297a9	Merge "res_pjsip: Fail global load if debug or default_from_user are empty" into 13	9 years ago
zuul	3ea349e2bd	Merge "location.c: Misc fixes and cleanups." into 13	9 years ago
zuul	ce7357237c	Merge "res_pjsip res_pjsip_mwi: Misc fixes and cleanups." into 13	9 years ago
zuul	0383500afb	Merge "pjsip_distributor.c: Add missing allocation failure check." into 13	9 years ago
George Joseph	143df33110	res_pjsip: Fail global load if debug or default_from_user are empty ... If debug was specified in the global configuration but left blank, the logger would treat it as a wildcard and log all hosts. If default_from_user was empty, a crash would result. The global apply handler now checks for empty strings. ASTERISK-26239 #close ASTERISK-26238 #close Change-Id: Ie75727f5cd5808845d92cc81f5713842fb203336	9 years ago
Richard Mudgett	1fc5c90014	res_pjsip res_pjsip_mwi: Misc fixes and cleanups. ... * Eliminated RAII_VAR() usage in ast_sip_persistent_endpoint_update_state(). * Added a missing allocation failure check to persistent_endpoint_find_or_create(). * Made persistent_endpoint_find_or_create() create the new object without a lock as it isn't needed. * Cleaned up some ao2 container allocation idioms. * Reordered res_pjsip_mwi.c load_module() and unload_module() Change-Id: If8ce88fbd82a0c72a37a2388f74f77237a6a36a8	9 years ago
Richard Mudgett	73052e5732	location.c: Misc fixes and cleanups. ... * Eliminated most RAII_VAR() usage. * Added several missing allocation failure checks. * Made ast_sip_for_each_contact() allocate the wrapper ao2 object without a lock as it is not needed. Change-Id: Ie20913365156c95dd79e5d471cfd25e99ae880bc	9 years ago
Richard Mudgett	e1248c3075	res_pjsip: Make aor named lock a mutex. ... The named aor lock was always being locked for writes so a rwlock adds no benefit and may be slower because rwlocks are biased toward read locking. Change-Id: I8c5c2c780eb30ce5441832257beeb3506fd12b28	9 years ago
Richard Mudgett	6e40334d89	pjsip_distributor.c: Add missing allocation failure check. ... Change-Id: I932ab2cea845e534d9ff318035b6de39972d3b28	9 years ago
Alexei Gradinari	a06a1af0eb	res_pjsip_mwi: fix unsolicited mwi blocks PJSIP stack ... The PJSIP taskprocessors could be overflowed on startup if there are many (thousands) realtime endpoints configured with unsolicited mwi. The PJSIP stack could be totally unresponsive for a few minutes after boot completed. This patch creates a separate PJSIP serializers pool for mwi and makes unsolicited mwi use serializers from this pool. This patch also adds 2 new global options to tune taskprocessor alert levels: 'mwi_tps_queue_high' and 'mwi_tps_queue_low'. This patch also adds new global option 'mwi_disable_initial_unsolicited' to disable sending unsolicited mwi to all endpoints on startup. If disabled then unsolicited mwi will start processing on next endpoint's contact update. ASTERISK-26230 #close Change-Id: I4c8ecb82c249eb887930980a800c9f87f28f861a	9 years ago
Richard Mudgett	851b1c3a17	res_pjsip: Add fax_detect_timeout endpoint option. ... The new endpoint option allows the PJSIP channel driver's fax_detect endpoint option to timeout on a call after the specified number of seconds into a call. The new feature is disabled if the timeout is set to zero. The option is disabled by default. ASTERISK-26214 Reported by: Richard Mudgett Change-Id: Id5a87375fb2c4f9dc1d4b44c78ec8735ba65453d	9 years ago
Richard Mudgett	fea201f7e6	pjsip_options.c: Fix container operation. ... aor_observer_deleted() needs to operate on all contacts found for the deleted AOR instead of only the first one found. This is really only a problem if there is more than one contact for the AOR. Change-Id: Id24ac0d5e8c931330231fb45dd2a331a84339dc1	9 years ago
Richard Mudgett	02877b4b4f	pjsip_configuration.c: Misc cleanups. ... * Fix some whitespace in various routines. * Rename i to iter in persistent_endpoint_update_state(). * Fix off-nominal copy/paste message wording in persistent_endpoint_contact_deleted_observer() Change-Id: Id8e34f5d09e7eebac3af22501c44c1110a3e29d8	9 years ago
zuul	8cea01ab1b	Merge "res_pjsip: Fix statsd regression." into 13	9 years ago
zuul	daec52a8e6	Merge "res_pjsip: Added "subscribe_context" to endpoint" into 13	9 years ago
Richard Mudgett	97b4c7a5b4	res_pjsip: Fix statsd regression. ... The ASTERISK-25904 change-id I8fad8aae9305481469c38d2146e1ba3a56d3108f patch introduced several regressions when the newly created "Updated" state goes out for each endpoint registration refresh. 1) It restarted any OPTIONS RTT ping cycle. 2) It would interfere with a currently active ping and throw off that ping's resulting RTT calculation. 3) It cleared the RTT time each time the endpoint was refreshed. 4) The cleared RTT time was sent out as a statsd update each time. 5) It created two AMI events for each update. * Revert the original patch and reimplement it. Now the current contact status state is re-sent instead of the state being momentarily toggled every time the endpoint refreshes its registration. The statsd events are not created for the re-sent refresh because they are sent after every OPTIONS ping. ASTERISK-26160 #close Reported by: Matt Jordan Change-Id: Ie072be790fbb2a8f5c1c874266e4143fa31f66d1	9 years ago
Scott Griepentrog	e26bd15e7a	PJSIP: provide valid tcp nodelay option for reuse ... When using TCP transport with chan_pjsip, the TCP_NODELAY option value was allocated on the stack, then passed as a pointer to the tcp transport configuration structure, and later re-used on subsequently created sockets when it was no longer valid. This patch changes the allocation to be a static. ASTERISK-26180 #close Reported by: Scott Griepentrog Change-Id: I3251164c7f710dbdab031282f00e30a9770626a0	9 years ago
Alexei Gradinari	2c16a81dd5	res_pjsip: Added "subscribe_context" to endpoint ... If specified, incoming SUBSCRIBE requests will be searched for the matching extension in the indicated context. If no "subscribe_context" is specified, then the "context" setting is used. ASTERISK-25471 #close Change-Id: I3fb7a15f5bc154079bd348c08b7ad1cdd2d5e514	9 years ago
Joshua Colp	7ed680cf92	Merge "res_pjsip: improve realtime performance #2" into 13	9 years ago
Mark Michelson	1b79e2deff	Fix Alembic upgrades. ... A non-existent constraint was being referenced in the upgrade script. This patch corrects the problem by removing the reference. This patch fixes another realtime problem as well. Our Alembic scripts store booleans as yes or no values. However, Sorcery tries to insert "true" or "false" instead. This patch updates Sorcery to use "yes" and "no" ASTERISK-26128 #close Change-Id: I366dbbf91418a9cb160b3ca74b0e59b5ac284bec	9 years ago
Alexei Gradinari	b3c787d1dd	res_pjsip: improve realtime performance #2 ... The patch removes updating all Endpoints' status on startup. Instead, only non-qualified aors with static contact and non-qualified non-expired contacts are retrieved from the realtime to update the endpoint status to ONLINE. The endpoint name was added to the contact object to simply find the endpoint that created this contact. The status of endpoints with qualified aors will be updated by 'qualify' functions. ASTERISK-26061 #close Change-Id: Id324c1776fa55d3741e0c5457ecac0304cb1a0df	9 years ago
Richard Mudgett	110d772467	sorcery: Add setting object type congestion levels. ... Sorcery creates taskprocessors for object types to process object observer callbacks. An API call is needed to be able to set the congestion levels of these taskprocessors for selected object types. * Updated PJSIP's contact and contact_status sorcery object type observer default congestion levels based upon stress testing. Increased the congestion levels to reduce the potential for bursty register/unregister and subscribe/unsubscribe activity from triggering the taskprocessor overload alert. ASTERISK-26088 Reported by: Richard Mudgett Change-Id: I4542e83b556f0714009bfeff89505c801f1218c6	10 years ago
Richard Mudgett	610eee2a36	taskprocessors: Implement high/low water mark alerts. ... When taskprocessors get backed up, there is a good chance that we are being overloaded and need to defer adding new work to the system. * Implemented a high/low water alert mechanism for modules to check if the system is being overloaded and take appropriate action. When a taskprocessor is created it has default congestion levels set. A taskprocessor can later have those congestion levels altered for specific needs if stress testing shows that the taskprocessor is a symptom of overloading or needs to handle bursty activity without triggering an overload alert. * Add CLI "core show taskprocessor" low/high water columns. * Fixed __allocate_taskprocessor() to not use RAII_VAR(). RAII_VAR() was never a good thing to use when creating a taskprocessor because of the nature of how its references needed to be cleaned up on a partial creation. * Made res_pjsip's distributor check if the taskprocessor overload alert is active before placing a message representing brand new work onto a distributor serializer. ASTERISK-26088 Reported by: Richard Mudgett Change-Id: I182f1be603529cd665958661c4c05ff9901825fa	10 years ago
Richard Mudgett	16b08444da	pjsip_distributor.c: Consistently pick a serializer for messages. ... Incoming messages that are not part of a dialog or a recognized response to one of our requests need to be sent to a consistent serializer. Under load we may be queueing retransmissions before we can process the original message. We don't need to throw these messages onto random serializers and cause reentrancy and message sequencing problems. * Created a pool of pjsip/distributor serializers that get picked by hashing the call-id and remote tag strings of the received messages. * Made ast_sip_destroy_distributor() destroy items in the reverse order of creation. ASTERISK-26088 Reported by: Richard Mudgett Change-Id: I2ce769389fc060d9f379977f559026fbcb632407	10 years ago
Richard Mudgett	993b769524	pjsip_distributor.c: Ignore messages until fully booted. ... We should not be processing any incoming messages until we are fully booted. We may not have dialplan or other needed configuration loaded yet. ASTERISK-26089 #close Reported by: Scott Griepentrog ASTERISK-26088 Reported by: Richard Mudgett Change-Id: I584aefb4f34b885a8927e1f13a2c64babd606264	10 years ago
Richard Mudgett	b2ce0e354b	pjsip_distributor.c: Use correct rdata info access method (Part 2). ... The pjproject doxygen for rdata->msg_info.info says to call pjsip_rx_data_get_info() instead of accessing the struct member directly. You need to call the function mostly because the function will generate the struct member value if it is not already setup. Change-Id: I4d519385a577f3e9d9193a88125e493cf17fa799	10 years ago
Joshua Colp	e3c9ad6382	Merge "res_pjsip: add "via_addr", "via_port", "call_id" to contact" into 13	10 years ago
zuul	856d6e34c3	Merge "res_pjsip: chatty verbose messages" into 13	10 years ago
Richard Mudgett	03d5b3ce5c	pjsip_distributor.c: Use correct rdata info access method. ... The pjproject doxygen for rdata->msg_info.info says to call pjsip_rx_data_get_info() instead of accessing the struct member directly. You need to call the function mostly because the function will generate the struct member value if it is not already setup. Change-Id: Iafe8b01242b7deb0ebfdc36685e21374a43936d2	10 years ago
Alexei Gradinari	230686f4ec	res_pjsip: add "via_addr", "via_port", "call_id" to contact ... As res_pjsip_nat rewrites contact's address, only the last Via header can contain the source address of registered endpoint. Also Call-Id header may contain the source address of registered endpoint. Added "via_addr", "via_port", "call_id" to contact. Added new fields ViaAddress, CallID to AMI event ContactStatus. ASTERISK-26011 Change-Id: I36bcc0bf422b3e0623680152d80486aeafe4c576	10 years ago
Alexei Gradinari	04c12561a7	res_pjsip: chatty verbose messages ... There are a lot of verbose messages about Endpoint and Contact status changes if there are many dynamic endpoints. The patch sets verbose level 2 for Endpoint status changes and verbose level 3 for Contact status changes. ASTERISK-26055 #close Change-Id: Ie64e261ddbbc41bfff0f0190241152cc123fe6d7	10 years ago
Mark Michelson	c0b190dd9a	res_pjsip: Match dialogs on responses better. ... When receiving an incoming response to a dialog-starting INVITE, we were not matching the response to the INVITE dialog. Since we had not recorded the to-tag to the dialog structure, the PJSIP-provided method to find the dialog did not match. Most of the time, this was not a problem, because there is a fall-back that makes the response get routed to the same serializer that the request was sent on. However, in cases where an asynchronous DNS lookup occurs in the PJSIP core, the thread that sends the INVITE is not actually a threadpool serializer thread. This means we are unable to record a serializer to handle the incoming response. Now, imagine what happens when an INVITE is sent on a non-serialized thread, and an error response (such as a 486) arrives. The 486 ends up getting put on some random threadpool thread. Eventually, a hangup task gets queued on the INVITE dialog serializer. Since the 486 is being handled on a different thread, the hangup task can execute at the same time that the 486 is being handled. The hangup task assumes that it is the sole owner of the INVITE session and channel, so it ends up potentially freeing the channel and NULLing the session's channel pointer. The thread handling the 486 can crash as a result. This change has the incoming response match the INVITE transaction, and then get the dialog from that transaction. It's the same method we had been using for matching incoming CANCEL requests. By doing this, we get the INVITE dialog and can ensure that the 486 response ends up being handled by the same thread as the hangup, ensuring that the hangup runs after the 486 has been completely handled. ASTERISK-25941 #close Reported by Javier Riveros Change-Id: I0d4cc5d07e2a8d03e9db704d34bdef2ba60794a0	10 years ago
Joshua Colp	4e4a991d90	Merge "res_pjsip: Endpoint IP Access Controls" into 13	10 years ago
George Joseph	b6f9392a12	res_pjsip: Set TCP_NODELAY on TCP transports ... Although it's perfectly legal to place multiple SIP messages in the same packet, it can cause problems because the Linux default is to enable Path MTU Discovery which sets the Don't Fragment bit on the packets. If adding a second message to the packet causes the MTU to be exceeded, and the destination isn't equipped to send a FRAGMENTATION NEEDED response to a large packet, the packet will just be dropped. We can't specifically tell the stack to send only 1 message per packet, but we can turn on TCP_NODELAY when we create the transport. This will at least tell the stack to send packets as soon as possible. ASTERISK-26005 #close Reported-by: Ross Beer Change-Id: I820f23227183f2416ca5e393bec510e8fe1c8fbd	10 years ago
zuul	c735ce1a05	Merge "config_transport: Tell pjproject to allow all SSL/TLS protocols" into 13	10 years ago
Alexei Gradinari	524a302974	res_pjsip: Endpoint IP Access Controls ... With the old SIP module we can use IP access controls per peer. PJSIP module missing this feature. This patch added next configuration Endpoint options: "acl" - list of IP ACL section names in acl.conf "deny" - List of IP addresses to deny access from "permit" - List of IP addresses to permit access from "contact_acl" - List of Contact ACL section names in acl.conf "contact_deny" - List of Contact header addresses to deny "contact_permit" - List of Contact header addresses to permit This patch also better logging failed request: add custom message instead of "No matching endpoint found" add SIP method to logging ASTERISK-25900 Change-Id: I456dea3909d929d413864fb347d28578415ebf02	10 years ago
George Joseph	e2df15bae9	pjsip_distributor: Add missing newline to NOTICE ... There was a newline missing from the end of the "no matching endpoint" notice. Change-Id: Idc11fe5bc0354072291663dbffe648c471e39181	10 years ago
zuul	a01ce2b889	Merge "res_pjsip: improve realtime performance" into 13	10 years ago
George Joseph	fb6227a372	config_transport: Tell pjproject to allow all SSL/TLS protocols ... The default tls settings for pjproject only allow TLS 1, TLS 1.1 and TLS 1.2. SSL is not allowed. So, even if you specify "sslv3" for a transport method, it's silently ignored and one of the TLS protocols is used. This was a new behavior of pjsip_tls_setting_default() in 2.4 (when tls.proto was added) that we never caught. Now we need to set tls.proto = 0 after we call pjsip_tls_setting_default(). This tells pjproject to set the socket protocol to match the method. ASTERISK-26004 #close Change-Id: Icfb55c1ebe921298dedb4b1a1d3bdc3ca41dd078	10 years ago
Alexei Gradinari	9c2032240e	res_pjsip: improve realtime performance ... This patch modified pjsip_options to retrieve only permament contacts for aor if the qualify_frequency is > 0 and persisted contacts if the qualify_frequency is > 0. This patch also fixed a bug in res_sorcery_astdb. res_sorcery_astdb doesn't save object data retrived from astdb. ASTERISK-25826 Change-Id: I1831fa46c4578eae5a3e574ee3362fddf08a1f05	10 years ago
Alexei Gradinari	7a14e669f0	res_pjsip/AMI: add contact.updated event ... With the old SIP module AMI sends PeerStatus event on every successfully REGISTER requests, ie, on start registration, update registration and stop registration. With PJSIP AMI sends ContactStatus only when status is changed. Regarding registration: on start registration - Created on stop registration - Removed but on update registration nothing This patch added contact.updated event. ASTERISK-25904 Change-Id: I8fad8aae9305481469c38d2146e1ba3a56d3108f	10 years ago
Alexei Gradinari	3cb8934de0	pjsip: Added "reg_server" to contacts. ... If the Asterisk system name is set in asterisk.conf, it will be stored into the "reg_server" field in the ps_contacts table to facilitate multi-server setups. ASTERISK-25931 Change-Id: Ia8f6bd2267809c78753b52bcf21835b9b59f4cb8	10 years ago
George Joseph	38bed4515d	res_pjsip: Add ability to identify by Authorization username ... A feature of chan_sip that service providers relied upon was the ability to identify by the Authorization username. This is most often used when customers have a PBX that needs to register rather than identify by IP address. From my own experiance, this is pretty common with small businesses who otherwise don't need a static IP. In this scenario, a register from the customer's PBX may succeed because From will usually contain the PBXs account id but an INVITE will contain the caller id. With nothing recognizable in From, the service provider's Asterisk can never match to an endpoint and the INVITE just stays unauthorized. The fixes: A new value "auth_username" has been added to endpoint/identify_by that will use the username and digest fields in the Authorization header instead of username and domain in the the From header to match an endpoint, or the To header to match an aor. This code as added to res_pjsip_endpoint_identifier_user rather than creating a new module. Although identify_by was always a comma-separated list, there was only 1 choice so order wasn't preserved. So to keep the order, a vector was added to the end of ast_sip_endpoint. This is only used by res_pjsip_registrar to find the aor. The res_pjsip_endpoint_identifier_* modules are called in globals/endpoint_identifier_order. Along the way, the logic in res_pjsip_registrar was corrected to match most-specific to least-specific as res_pjsip_endpoint_identifier_user does. The order is: username@domain username@domain_alias username Auth by username does present 1 problem however, the first INVITE won't have an Authorization header so the distributor, not finding a match on anything, sends a securty_alert. It still sends a 401 with a challenge so the next INVITE will have the Authorization header and presumably succeed. As a result though, that first security alert is actually a false alarm. To address this, a new feature has been added to pjsip_distributor that keeps track of unidentified requests and only sends the security alert if a configurable number of unidentified requests come from the same IP in a configurable amout of time. Those configuration options have been added to the global config object. This feature is only used when auth_username is enabled. Finally, default_realm was added to the globals object to replace the hard coded "asterisk" used when an endpoint is not yet identified. The testsuite tests all pass but new tests are forthcoming for this new feature. ASTERISK-25835 #close Reported-by: Ross Beer Change-Id: I30ba62d208e6f63439600916fcd1c08a365ed69d	10 years ago
Joshua Colp	e0e03cd2c8	Merge "res_pjsip: disable multi domain to improve realtime performace" into 13	10 years ago
Alexei Gradinari	df3639700a	res_pjsip: disable multi domain to improve realtime performace ... This patch added new global pjsip option 'disable_multi_domain'. Disabling Multi Domain can improve Realtime performance by reducing number of database requests. ASTERISK-25930 #close Change-Id: I2e7160f3aae68475d52742107949a799aa2c7dc7	10 years ago
Joshua Colp	e5c5fac8f1	Merge "res_pjsip: Add serialized scheduler (res_pjsip/pjsip_scheduler.c)" into 13	10 years ago
Mark Michelson	efae187217	PJSIP: Remove PJSIP parsing functions from uri length validation. ... The PJSIP parsing functions provide a nice concise way to check the length of a hostname in a SIP URI. The problem is that in order to use those parsing functions, it's required to use them from a thread that has registered with PJLib. On startup, when parsing AOR configuration, the permanent URI handler may not be run from a PJLib-registered thread. Specifically, this could happen when Asterisk was started in daemon mode rather than console-mode. If PJProject were compiled with assertions enabled, then this would cause Asterisk to crash on startup. The solution presented here is to do our own parsing of the contact URI in order to ensure that the hostname in the URI is not too long. The parsing does not attempt to perform a full SIP URI parse/validation, since the hostname in the URI is what is important. ASTERISK-25928 #close Reported by Joshua Colp Change-Id: Ic3d6c20ff3502507c17244a8b7e2ca761dc7fb60	10 years ago
George Joseph	9740277713	res_pjsip: Add serialized scheduler (res_pjsip/pjsip_scheduler.c) ... There are several places that do scheduled tasks or periodic housecleaning, each with its own implementation: * res_pjsip_keepalive has a thread that sends keepalives. * pjsip_distributor has a thread that cleans up expired unidentified requests. * res_pjsip_registrar_expire has a thread that cleans up expired contacts. * res_pjsip_pubsub uses ast_sched directly and then calls ast_sip_push_task. * res_pjsip_sdp_rtp also uses ast_sched to send keepalives. There are also places where we should be doing scheduled work but aren't. A good example are the places we have sorcery observers to start registration or qualify. These don't work when changes are made to a backend database without a pjsip reload. We need to check periodically. As a first step to solving these issues, a new ast_sip_sched facility has been created. ast_sip_sched wraps ast_sched but only uses ast_sched as a scheduled queue. When a task is ready to run, ast_sip_task_pusk is called for it. This ensures that the task is executed in a PJLIB registered thread and doesn't hold up the ast_sched thread so it can immediately continue processing the queue. The serializer used by ast_sip_sched is one of your choosing or a random one from the res_pjsip pool if you don't choose one. Another feature is the ability to automatically clean up the task_data when the task expires (if ever). If it's an ao2 object, it will be dereferenced, if it's a malloc'd object it will be freed. This is selectable when the task is scheduled. Even if you choose to not auto dereference an ao2 task data object, the scheduler itself maintains a reference to it while the task is under it's control. This prevents the data from disappearing out from under the task. There are two scheduling models. AST_SIP_SCHED_TASK_PERIODIC specifies that the invocations of the task occur at the specific interval. That is, every "interval" milliseconds, regardless of how long the task takes. If the task takes longer than the interval, it will be scheduled at the next available multiple of interval. For exmaple: If the task has an interval of 60 secs and the task takes 70 secs (it better not), the next invocation will happen at 120 seconds. AST_SIP_SCHED_TASK_DELAY specifies that the next invocation of the task should start "interval" milliseconds after the current invocation has finished. Also, the same ast_sched facility for fixed or variable intervals exists. The task's return code in conjunction with the AST_SIP_SCHED_TASK_FIXED or AST_SIP_SCHED_TASK_VARIABLE flags controls the next invocation start time. One res_pjsip.h housekeeping change was made. The pjsip header files were added to the top. There have been a few cases lately where I've needed res_pjsip.h just for ast_sip calls and had compiles fail spectacularly because I didn't add the pjsip header files to my source even though I never referenced any pjsip calls. Finally, a few new convenience APIs were added to astobj2 to make things a little easier in the scheduler. ao2_ref_and_lock() calls ao2_ref() and ao2_lock() in one go. ao2_unlock_and_unref() does the reverse. A few macros were also copied from res_phoneprov because I got tired of having to duplicate the same hash, sort and compare functions over and over again. The AO2_STRING_FIELD_(HASH|SORT|CMP)_FN macros will insert functions suitable for aor_container_alloc into your source. This facility can be used immediately for the situations where we already have a thread that wakes up periodically or do some scheduled work. For the registration and qualify issues, additional sorcery and schema changes would need to be made so that we can easily detect changed objects on a periodic basis without having to pull the entire database back to check. I'm thinking of a last-updated timestamp on the rows but more on this later. Change-Id: I7af6ad2b2d896ea68e478aa1ae201d6dd016ba1c	10 years ago
Mark Michelson	0b4bb19e0b	AST-2016-004: Fix crash on REGISTER with long URI. ... Due to some ignored return values, Asterisk could crash if processing an incoming REGISTER whose contact URI was above a certain length. ASTERISK-25707 #close Reported by George Joseph Patches: 0001-res_pjsip-Validate-that-URIs-don-t-exceed-pjproject-.patch AST-2016-004 Change-Id: I0ed3898fe7ab10121b76c8c79046692de3a1be55	10 years ago
zuul	70c788ec5e	Merge "res_pjsip: Add headers to AMI Event ContactStatusDetail" into 13	10 years ago