26704 Commits (20ee33e22e3724c35ab3078c5032b87af5b4920c)

 

All Branches   

Search

Author	SHA1	Message	Date
George Joseph	0fa6c34dc6	outbound_registration: Add 'pjsip send register' and update 'send unregister' ... The current behavior of 'pjsip send unregister' is to send the unregister (REGISTER with 0 exp) but let the next scheduled register proceed normally. I don't think that's a good idea. If you unregister, it should stay unregistered until you decide to start registrations again. So this patch just adds a cancel_registration call to the current unregister_task to cancel the timer. Of course, now you need a way to start registration again so I've added a 'pjsip send register' command that unregisters and cancels any existing registration (the same as send unregister), then sends an immediate registration and starts the timer back up again. Both changes also ripple to AMI. There's a new PJSIPRegister command. There's no harm in calling either command repeatedly. They don't care about the actual state. Tested-by: George Joseph Review: https://reviewboard.asterisk.org/r/4301/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430223 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
George Joseph	d873b09075	pjsip cli: Fix sorting of contacts for 'pjsip list contacts' ... For some reason I was using a hash container instead of a list to gather the contacts for 'pjsip list/show contacts' so even though I had a sort function, the output wasn't sorted. This patch just changes the hash container to a list container and the contacts now appear sorted in the CLI. Tested-by: George Joseph Review: https://reviewboard.asterisk.org/r/4305/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430221 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Scott Griepentrog	566907fabd	bridge: avoid leaking channel during blond transfer pt2 ... A blond transfer to a failed destination, when followed by a recall attempt, lead to a leak of the reference to the destination channel. In addition to correcting the regression on the previous attempt (r429826) this fixes the leak and two additional reference leaks on failures of bridge_import. ASTERISK-24513 #close Review: https://reviewboard.asterisk.org/r/4302/ ........ Merged revisions 430199 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430200 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	b9a7875dd6	pjsip: Document addition of 'PJSIP_AOR' and 'PJSIP_CONTACT' in CHANGES file. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430181 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	a7c38428af	pjsip: Add 'PJSIP_AOR' and 'PJSIP_CONTACT' dialplan functions. ... The PJSIP_AOR dialplan function allows inspection of configured AORs including what contacts are currently bound to them. The PJSIP_CONTACT dialplan function allows inspection of contacts in existence. These can include both externally added (by way of registration) or permanent ones. ASTERISK-24341 Reported by: xrobau Review: https://reviewboard.asterisk.org/r/4308/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430179 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kinsey Moore	cca262e7d3	PJSIP: Update transport method documentation ... This updates the documentation for the 'method' configuration option to be more verbose about the behaviors of values 'unspecified' and 'default'. They do exactly the same thing which is to select the default as defined by PJSIP which is currently TLSv1. Review: https://reviewboard.asterisk.org/r/4264/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430145 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kevin Harwell	1a0979d437	app_queue: Update sample conf documenation ... Updated the queues.conf.sample file to explicitly state which channel queue variables are propagated to. ASTERISK-24267 Reported by: Mitch Claborn ........ Merged revisions 430126 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430127 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	b521c612fc	res_pjsip: Backport missing commits for user_eq_phone ... This backports the following from trunk, which were missed: r427257 | file | 2014-11-04 16:31:16 -0600 (Tue, 04 Nov 2014) | 2 lines res_pjsip: Allow + at the beginning of a phone number when user_eq_phone is enabled. r427259 | file | 2014-11-04 16:51:32 -0600 (Tue, 04 Nov 2014) | 2 lines res_pjsip: Apply the 'user_eq_phone' setting to the To header as well. It also adds the Alembic script for the option. ASTERISK-24643 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430092 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	915bb88d3e	res_pjsip_keepalive: Add runtime configurable keepalive module for connection-oriented transports. ... Note that this is backport from trunk of r425825. This change adds a module which is configurable using the keep_alive_interval setting in the global section that will send a CRLF keep alive to all active connection-oriented transports at the provided interval. This is useful because it can help keep connections open through NATs. This functionality also exists within PJSIP but can not be controlled at runtime and requires recompiling it. Review: https://reviewboard.asterisk.org/r/4084/ ASTERISK-24644 #close git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430084 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	006ffdcfb2	res_pjsip: Add 'user_eq_phone' option to add a 'user=phone' parameter when applicable. ... Note that this is a backport of r425804 from trunk. This change adds a configuration option which adds a 'user=phone' parameter if the user portion of the request URI or the From URI is determined to be a number. Review: https://reviewboard.asterisk.org/r/4073/ ASTERISK-24643 #close git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430083 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
George Joseph	d1c532034b	pjsip_options: Fix continued qualifies after endpoint/aor deletion ... If you remove an endpoint/aor from pjsip.conf then do a core reload, qualifies will continue even though the object are gone. This happens because nothing clears out the qualify tasks. This patch unschedules all existing qualify tasks before scheduling new ones on reload. Tested-by: George Joseph Review: https://reviewboard.asterisk.org/r/4290/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430064 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
George Joseph	0a3dd7589e	test_astobj2: Fix warning for missing trailing slash in category ... This patch adds a trailing slash to the category for this test. No more warning. Tested-by: George Joseph Review: https://reviewboard.asterisk.org/r/4295/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430059 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	7a356232bd	DTMF atxfer: Setup recall channels as if the transferee initiated the call. ... After the initial DTMF atxfer call attempt to the transfer target fails to answer during a blonde transfer, the recall callback channels do not get setup with information from the initial transferrer channel. As a result, the recall callback to the transferrer does not have callid, channel variables, datastores, accountcode, peeraccount, COLP, and CLID setup. A similar situation happens with the recall callback to the transfer target but it is less visible. The recall callback to the transfer target does not have callid, channel variables, datastores, accountcode, peeraccount, and COLP setup. * Added missing information to the recall callback channels before initiating the call. callid, channel variables, datastores, accountcode, peeraccount, COLP, and CLID * Set callid of the transferrer channel on the DTMF atxfer controller thread attended_transfer_monitor_thread(). * Added missing channel unlocks and props unref to off nominal paths in attended_transfer_properties_alloc(). ASTERISK-23841 #close Reported by: Richard Mudgett Review: https://reviewboard.asterisk.org/r/4259/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430034 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	fca0be57d9	queue_log: Post QUEUESTART entry when Asterisk fully boots. ... The QUEUESTART log entry has historically acted like a fully booted event for the queue_log file. When the QUEUESTART entry was posted to the log was broken by the change made by ASTERISK-15863. * Made post the QUEUESTART queue_log entry when Asterisk fully boots. This restores the intent of that log entry and happens after realtime has had a chance to load. AST-1444 #close Reported by: Denis Martinez Review: https://reviewboard.asterisk.org/r/4282/ ........ Merged revisions 430009 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430010 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	9735a13429	chan_sip: Send CANCEL via original INVITE destination even after UPDATE request ... Given the following scenario: * Three SIP phones (A, B, C), all communicating via a proxy with Asterisk * A call is established between A and B. B performs a SIP attended transfer of A to C. B sets the call on hold (A is hearing MOH) and dials the extension of C. While phone C is ringing, B transfers the call (that is, what we typically call a 'blond transfer'). * When the transfer completes, A hears the ringing of phone C, while B is idle. In the SIP messaging for the above scenario, a REFER request is sent to transfer the call. When "sendrpid=yes" is set in sip.conf, Asterisk may send an UPDATE request to phone C to update party information. This update is sent directly to phone C, not through the intervening proxy. This has the unfortunate side effect of providing route information, which is then set on the sip_pvt structure for C. If someone (e.g. B) is trying to get the call back (through a directed pickup), Asterisk will send a CANCEL request to C. However, since we have now updated the route set, the CANCEL request will be sent directly to C and not through the proxy. The phone ignores this CANCEL according to RFC3261 (Section 9.1). This patch updates reqprep such that the route is not updated if an UPDATE request is being sent while the INVITE state is INV_PROCEEDING or INV_EARLY_MEDIA. This ensures that a subsequent CANCEL request is still sent to the correct location. Review: https://reviewboard.asterisk.org/r/4279 ASTERISK-24628 #close Reported by: Karsten Wemheuer patches: issue.patch uploaded by Karsten Wemheuer (License 5930) ........ Merged revisions 429982 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429983 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
George Joseph	fc79cf6428	res_pjsip_phoneprovi_provider: Fix reload ... Reloading wasn't working correctly because on a reload, the sorcery apply handler was never being called for unchanged users. So, instead of using an apply handler, I'm now iterating over all users. Works much more reliably. Tested-by: George Joseph Review: https://reviewboard.asterisk.org/r/4288/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429914 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	f88460115f	acl: Fix reloading of configuration if configuration file does not exist at startup. ... The named ACL code incorrectly destroyed the config options information if loading of the configuration file failed at startup. This would result in reloading also failing even if a valid configuration file was put in place. ASTERISK-23733 #close Reported by: Richard Kenner ........ Merged revisions 429893 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429894 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	4b054bdc6d	res_http_websocket.c: Fix incorrect use of sizeof in ast_websocket_write(). ... This won't fix the reported issue but it is an incorrect use of sizeof. ASTERISK-24566 Reported by: Badalian Vyacheslav ........ Merged revisions 429867 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429868 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	7074bf956b	chan_dahdi: Don't ignore setvar when using configuration section scheme. ... When the configuration section scheme of chan_dahdi.conf is used (keyword dahdichan instead of channel) all setvar= options are completely ignored. No variable defined this way appears in the created DAHDI channels. * Move the clearing of setvar values to after the deferred processing of dahdichan. AST-1378 #close Reported by: Guenther Kelleter Patch by: Guenther Kelleter ........ Merged revisions 429825 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429829 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Scott Griepentrog	6a99df47c0	bridge: avoid leaking channel during blond transfer ... After a blond transfer (start attended and hang up) to a destination that also hangs up without answer, the Local;1 channel was leaked and would show up on core show channels. This was happening because the attended state blond_nonfinal_enter() resetting the props->transfer_target to null while releasing it's own reference, which would later prevent props from releasing another reference during destruction. The change made here is simply to not assign the target to NULL. ASTERISK-24513 #close Reported by: Mark Michelson Review: https://reviewboard.asterisk.org/r/4262/ ........ Merged revisions 429826 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429827 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	b22c833c12	chan_dahdi.c, res_rtp_asterisk.c: Change some spammy debug messages to level 5. ... ASTERISK-24337 #close Reported by: Rusty Newton ........ Merged revisions 429804 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429805 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	e603fbe04a	chan_dahdi: Populate CALLERID(ani2) for incoming calls in featdmf signaling mode. ... For the featdmf signaling mode the incoming MF Caller-ID information is formatted as follows: *${CALLERID(ani2)}${CALLERID(ani)}#*${EXTEN}# Rather than discarding the ani2 digits, populate the CALLERID(ani2) value with what is received instead. AST-1368 #close Reported by: Denis Martinez Patches: extract_ani2_for_featdmf_v11.patch (license #5621) patch uploaded by Richard Mudgett ........ Merged revisions 429783 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429784 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kevin Harwell	4fad85f9bf	res_pjsip_sdp_rtp: wrong bridge chosen when the DTMF mode is not compatible ... A native rtp bridge was being chosen (it shouldn't have been) when using two pjsip channels with incompatible DTMF modes. This patch sets the rtp instance property, AST_RTP_PROPERTY_DTMF, for the appropriate DTMF mode(s) for pjsip. It was not being set before, meaning all DTMF modes for pjsip were being treated as compatible, thus native bridging would be chosen as the bridge type when it shouldn't have been. ASTERISK-24459 #close Reported by: Yaniv Simhi Review: https://reviewboard.asterisk.org/r/4265/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429763 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Mark Michelson	14d2f8f20f	Prevent potential infinite outbound authentication loops in registration. ... Prior to this patch, Asterisk would always respond to 401 responses to registration attempts by trying to provide a registration with authentication credentials. Even if subsequent attempts were rejected with 401 responses, Asterisk would continue this behavior. If authentication credentials were incorrect, this could continue forever. With this patch, we keep track of whether we have attempted authentication on an outbound registration attempt. If we already have, we don not try again until the next attempt. This prevents the infinite loop scenario. Review: https://reviewboard.asterisk.org/r/4273 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429761 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Mark Michelson	c1582929f9	Prevent possible race condition on dual redirect of channels in the same bridge. ... The AST_FLAG_BRIDGE_DUAL_REDIRECT_WAIT flag was created to prevent bridges from prematurely acting on orphaned channels in bridges. The problem with the AMI redirect action was that it was setting this flag on channels based on the presence of a PBX, not whether the channel was in a bridge. Whether a channel has a PBX is irrelevant, so the condition has been altered to check if the channel is in a bridge. ASTERISK-24536 #close Reported by Niklas Larsson Review: https://reviewboard.asterisk.org/r/4268 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429741 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Mark Michelson	5bd5f580c1	Ensure the correct value is returned for CHANNEL(pjsip, secure) ... Prior to this patch, we were using the PJSIP dialog's secure flag to determine if a secure transport was being used. Unfortunately, the dialog's secure flag was only set if a SIPS URI were in use, as required by RFC 3261 sections 12.1.1 and 12.1.2. What we're interested in is not dialog security, but transport security. This code change switches to a model where we use the dialog's target URI to determine what transport would be used to communicate, and then check if that transport is secure. AST-1450 #close Reported by John Bigelow Review: https://reviewboard.asterisk.org/r/4277 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429739 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
George Joseph	b4621cd0f5	res_pjsip_config_wizard: fix unload SEGV ... If certain pjsip modules aren't loaded, the wizard causes a SEGV when it unloads. Added a check for the presense of the object type wizard before trying to clean it up. Tested-by: George Joseph git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429719 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
George Joseph	105f224cfd	res_pjsip_config_wizard: Change FILEUNCHANGED config_load2 flag determination ... The module now applies the FILEUNCHANGED flag when both reloaded is specified AND there's no last_config for the object type. Tested-by: George Joseph Review: https://reviewboard.asterisk.org/r/4276/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429699 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Walter Doekes	9ae57e0dd6	Fix printf problems with high ascii characters after r413586 (1.8). ... In r413586 (1.8) various casts were added to silence gcc 4.10 warnings. Those fixes included things like: -out += sprintf(out, "%%%02X", (unsigned char) *ptr); +out += sprintf(out, "%%%02X", (unsigned) *ptr); That works for low ascii characters, but for the high range that yields e.g. FFFFFFC3 when C3 is expected. This changeset: - fixes those casts to use the 'hh' unsigned char modifier instead - consistently uses %02x instead of %2.2x (or other non-standard usage) - adds a few 'h' modifiers in various places - fixes a 'replcaes' typo - dev/urandon typo (in 13+ patch) Review: https://reviewboard.asterisk.org/r/4263/ ASTERISK-24619 #close Reported by: Stefan27 (on IRC) ........ Merged revisions 429673 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 429674 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429675 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
George Joseph	a3534b7c05	res_pjsip_config_wizard: fix test breakage ... Fix test breakage caused by not checking for res_pjsip before calling ast_sip_get_sorcery. Tested-by: George Joseph Review: https://reviewboard.asterisk.org/r/4269/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429653 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	f26d4618eb	chan_sip: Allow T.38 switch-over when SRTP is in use. ... Previously when SRTP was enabled on a channel it was not possible to switch to T.38 as no crypto attributes would be present. This change makes it so it is now possible. If a T.38 re-invite comes in SRTP is terminated since in practice you can't encrypt a UDPTL stream. Now... if we were doing T.38 over RTP (which does exist) then we'd have a chance but almost nobody does that so here we are. ASTERISK-24449 #close Reported by: Andreas Steinmetz patches: udptl-ignore-srtp-v2.patch submitted by Andreas Steinmetz (license 6523) ........ Merged revisions 429632 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429633 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	ad85e54fd9	res_pjsip_t38: Fix T.38 failure when peer reinvites immediately. ... If a remote endpoint reinvites to T.38 immediately the state machine will go into a peer reinvite state. If a T.38 capable application (such as ReceiveFax) queries it will receive this state. Normally the application will then indicate so that the channel driver will queue up the T.38 offer previously received. Once it receives this offer the application will act normally and negotiate. The res_pjsip_t38 module incorrectly partially squashed this indication. This would cause the application to think the request had failed when in reality it had actually worked. This change makes it so that no T.38 control frames (or indications) are squashed. git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429612 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
George Joseph	89617370ec	res_pjsip_config_wizard: Allow streamlined config of common pjsip scenarios ... res_pjsip_config_wizard ------------------ * This is a new module that adds streamlined configuration capability for chan_pjsip. It's targetted at users who have lots of basic configuration scenarios like 'phone' or 'agent' or 'trunk'. Additional information can be found in the sample configuration file at config/samples/pjsip_wizard.conf.sample. Tested-by: George Joseph Review: https://reviewboard.asterisk.org/r/4190/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429592 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Mark Michelson	b85f79c0c1	Activate persistent subscriptions when they are recreated. ... Prior to this change, recreating persistent subscriptions would create the subscription but would not activate it. This led to subscriptions being listed in the "NULL" state by diagnostics and not sending NOTIFYs when expected. Review: https://reviewboard.asterisk.org/r/4261 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429571 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
George Joseph	2b8c441096	loader: Move definition of ast_module_reload from _private.h to module.h ... No functionality change. Just move the definition of ast_module_reload from _private.h to module.h so it can be public. Also removed the include of _private.h from manager.c since ast_module_load was the only reason for including it. Tested-by: George Joseph Review: https://reviewboard.asterisk.org/r/4251/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429542 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	8f12ded887	DEBUG_THREADS: Fix regression and lock tracking initialization problems. ... This patch started with David Lee's patch at https://reviewboard.asterisk.org/r/2826/ and includes a regression fix introduced by the ASTERISK-22455 patch. The initialization of a mutex's lock tracking structure was not protected in a critical section. This is fine for any mutex that is explicitly initialized, but a static mutex may have its lock tracking double initialized if multiple threads attempt the first lock simultaneously. * Added a global mutex to properly serialize initialization of the lock tracking structure. The painful global lock can be mitigated by adding a double checked lock flag as discussed on the original review request. * Defer lock tracking initialization until first use. * Don't be "helpful" and initialize an uninitialized lock when DEBUG_THREADS is enabled. Debug code is not supposed to fix or change normal code behavior. We don't need a lock initialization race that would force a re-setup of lock tracking. Lock tracking already handles initialization on first use. * Properly handle allocation failures of the lock tracking structure. * No need to initialize tracking data in __ast_pthread_mutex_destroy() just to turn around and destroy it. The regression introduced by ASTERISK-22455 is the result of manipulating a pthread_mutex_t struct outside of the pthread library code. The pthread_mutex_t struct seems to have a global linked list pointer member that can get changed by other threads. Therefore, saving and restoring the contents of a pthread_mutex_t struct is a bad thing. Thanks to Thomas Airmont for finding this obscure regression. * Don't overwrite the struct ast_lock_track.reentr_mutex member to restore tracking data in __ast_cond_wait() and __ast_cond_timedwait(). The pthread_mutex_t struct must be treated as a read-only opaque variable. Miscellaneous other items fixed by this patch: * Match ast_suspend_lock_info() with ast_restore_lock_info() in __ast_cond_timedwait(). * Made some uninitialized lock sanity checks return EINVAL and try a DO_THREAD_CRASH. * Fix bad canlog initialization expressions. ASTERISK-24614 #close Reported by: Thomas Airmont Review: https://reviewboard.asterisk.org/r/4247/ Review: https://reviewboard.asterisk.org/r/2826/ ........ Merged revisions 429539 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429540 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	8c019b1a6b	res/res_agi: Make Verbose message for 'stream file' match other playbacks ... The Verbose message displayed when a file is played back via 'stream file' was formatted differently than other playbacks: * It didn't include the channel name * It didn't include the channel language It does, however, include the playback offset as well as any escape digits. That information was kept; however, this patch updates the formatting to more closely match the Verbose messages displayed when a file is played back by 'control stream file', Playback, ControlPlayback, or any other file playback operation. git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429519 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	7ff0d266a6	Add 11 merge properties ... git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429518 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	439e6e1c5d	media: Fix crash when determining sample count of a frame during shutdown. ... When shutting down Asterisk the codecs are cleaned up. As a result anything attempting to get a codec based on ID or details will find that no codec exists. This currently occurs when determining the sample count of a frame. This code did not take this situation into account. This change fixes this by getting the codec directly from the format and eliminates the lookup. This is both faster and also provides a guarantee that the codec will exist and will be valid. ASTERISK-24604 #close Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/4260/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429497 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kevin Harwell	01c4e76c4e	chan_pjsip: Race between channel answer and bridge setup when using direct media ... When direct media is enabled and a pjsip channel is answered a race would occur between the handling of the answer and bridge setup. Sometimes the media negotiation would take place after the native bridge was setup. This resulted in a NULL media address, which in turn resulted in Asterisk using its address as the remote media address when sending a reinvite. This patch makes the chan_pjsip answer handler synchronous thus alleviating the race condition (the bridge won't start setting things up until after it returns). ASTERISK-24563 #close Reported by: Steve Pitts Review: https://reviewboard.asterisk.org/r/4257/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429477 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
David M. Lee	49386cf568	Fix crash for sorcery misconfigs ... res_pjsip_outbound_publish was missing the CHECK_PJSIP_MODULE_LOADED() call in load_module, and would crash with a segfault if res_pjsip declined to load. Review: https://reviewboard.asterisk.org/r/4258/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429457 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kinsey Moore	3b0c40f337	PJSIP: Allow use of 'inactive' streams for hold ... This allows use of the 'inactive' stream direction identifier to be used for hold where 'sendonly' is normally used. Some Seimens phones use 'inactive' and this change allows music on hold to operate properly. Review: https://reviewboard.asterisk.org/r/4252/ Reported by: Steve Pitts ........ Merged revisions 429432 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429433 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kinsey Moore	15af40180a	Sorcery: Log when old config remains in use ... This adds a log message notifying the user that a stale configuration is in place upon reload when a config object fails to load. This situation can end up causing confusion when the object failed to load but exists from a previous config load especially when the old config is significantly different from the new config. Review: https://reviewboard.asterisk.org/r/4250/ Reported by: Thomas Thompson ........ Merged revisions 429429 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429430 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	0c9fbb449f	res_pjsip_session: Delay sending BYE if a re-INVITE transaction is in progress. ... Given the scenario where a PJSIP channel is in a native RTP bridge with direct media and the channel is then hung up the code will currently re-INVITE the channel back to Asterisk and send a BYE at the same time. Many SIP implementations dislike this greatly. This change makes it so that if a re-INVITE transaction is in progress the BYE is queued to occur after the completion of the transaction (be it through normal means or a timeout). Review: https://reviewboard.asterisk.org/r/4248/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429409 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	61fe4f10d2	res_pjsip_session: Fix issue where a declined media stream in a re-INVITE would fail SDP negotiation. ... In the past the SDP negotiation within res_pjsip_session was made more tolerant of certain situations. The only case where SDP negotiation will fail is when a major error occurs during negotiation. Receiving an already declined media stream is not considered a major error. When producing the local SDP the logic took this into account so on the initial INVITE the declined media stream did not cause an SDP negotiation failure. Unfortunately the logic for handling media streams with a handler did not mirror this logic and considered an already declined media stream an error and thus failed the SDP negotiation. This change makes the logic between both situations match so only under major errors will the SDP negotiation fail. ASTERISK-24607 #close Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/4254/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429407 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kevin Harwell	8237bd357d	ARI/AMI: Include language in standard channel snapshot output ... The CHANGES verbiage for the "language" addition had been put under the wrong release. This moves it to be under 13.1 to 13.2 changes. ASTERISK-24553 Reported by: Matt Jordan git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429387 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kinsey Moore	2288f910ea	Recorded merge of revisions 429378 from http://svn.asterisk.org/svn/asterisk/branches/12 ... ........ Fix incorrect patch applied in r429354 The patch that was applied was another pending patch. This swaps them out. git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429379 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kinsey Moore	b7f7d045ac	Recorded merge of revisions 429354 from http://svn.asterisk.org/svn/asterisk/branches/12 ... ........ Stasis: Update unittest for channel snapshots This adjusts the unit test for channel snapshots to take the new language key into account. git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429355 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kinsey Moore	50f6517296	Stasis: Update unittest for channel snapshots ... This adjusts the unit test for channel snapshots to take the new language key into account. git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429352 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kevin Harwell	d4a05879d6	ARI/AMI: Include language in standard channel snapshot output ... Adding information about including "language" in the standard channel snapshot output to the CHANGES file. Note the actual source changes have already been previously committed. ASTERISK-24553 Reported by: Matt Jordan ........ Merged revisions 429325 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429326 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago