42 Commits (206d4f57dc5fda3a5c48c4af3d96ffb18d0851df)

Author	SHA1	Message	Date
George Joseph	329507fe20	res_pjsip: Add contact_user to endpoint ... contact_user, when specified on an endpoint, will override the user portion of the Contact header on outgoing requests. Change-Id: Icd4ebfda2f2e44d3ac749d0b4066630e988407d4	9 years ago
Alexei Gradinari	a06a1af0eb	res_pjsip_mwi: fix unsolicited mwi blocks PJSIP stack ... The PJSIP taskprocessors could be overflowed on startup if there are many (thousands) realtime endpoints configured with unsolicited mwi. The PJSIP stack could be totally unresponsive for a few minutes after boot completed. This patch creates a separate PJSIP serializers pool for mwi and makes unsolicited mwi use serializers from this pool. This patch also adds 2 new global options to tune taskprocessor alert levels: 'mwi_tps_queue_high' and 'mwi_tps_queue_low'. This patch also adds new global option 'mwi_disable_initial_unsolicited' to disable sending unsolicited mwi to all endpoints on startup. If disabled then unsolicited mwi will start processing on next endpoint's contact update. ASTERISK-26230 #close Change-Id: I4c8ecb82c249eb887930980a800c9f87f28f861a	9 years ago
Richard Mudgett	33716106e0	res_pjsip: Whitespace and comment cleanup. ... Change-Id: I11139a4a95df34e223ba622aa6227e33ab8f6c38	9 years ago
Richard Mudgett	851b1c3a17	res_pjsip: Add fax_detect_timeout endpoint option. ... The new endpoint option allows the PJSIP channel driver's fax_detect endpoint option to timeout on a call after the specified number of seconds into a call. The new feature is disabled if the timeout is set to zero. The option is disabled by default. ASTERISK-26214 Reported by: Richard Mudgett Change-Id: Id5a87375fb2c4f9dc1d4b44c78ec8735ba65453d	9 years ago
Matt Jordan	361a16f316	configs/samples/pjsip.conf.sample: Fix typo ... A ':' is not a valid token for starting a comment. Change-Id: I123592d93a83d1bdde3e352822881eb9da85e5ad	10 years ago
George Joseph	38bed4515d	res_pjsip: Add ability to identify by Authorization username ... A feature of chan_sip that service providers relied upon was the ability to identify by the Authorization username. This is most often used when customers have a PBX that needs to register rather than identify by IP address. From my own experiance, this is pretty common with small businesses who otherwise don't need a static IP. In this scenario, a register from the customer's PBX may succeed because From will usually contain the PBXs account id but an INVITE will contain the caller id. With nothing recognizable in From, the service provider's Asterisk can never match to an endpoint and the INVITE just stays unauthorized. The fixes: A new value "auth_username" has been added to endpoint/identify_by that will use the username and digest fields in the Authorization header instead of username and domain in the the From header to match an endpoint, or the To header to match an aor. This code as added to res_pjsip_endpoint_identifier_user rather than creating a new module. Although identify_by was always a comma-separated list, there was only 1 choice so order wasn't preserved. So to keep the order, a vector was added to the end of ast_sip_endpoint. This is only used by res_pjsip_registrar to find the aor. The res_pjsip_endpoint_identifier_* modules are called in globals/endpoint_identifier_order. Along the way, the logic in res_pjsip_registrar was corrected to match most-specific to least-specific as res_pjsip_endpoint_identifier_user does. The order is: username@domain username@domain_alias username Auth by username does present 1 problem however, the first INVITE won't have an Authorization header so the distributor, not finding a match on anything, sends a securty_alert. It still sends a 401 with a challenge so the next INVITE will have the Authorization header and presumably succeed. As a result though, that first security alert is actually a false alarm. To address this, a new feature has been added to pjsip_distributor that keeps track of unidentified requests and only sends the security alert if a configurable number of unidentified requests come from the same IP in a configurable amout of time. Those configuration options have been added to the global config object. This feature is only used when auth_username is enabled. Finally, default_realm was added to the globals object to replace the hard coded "asterisk" used when an endpoint is not yet identified. The testsuite tests all pass but new tests are forthcoming for this new feature. ASTERISK-25835 #close Reported-by: Ross Beer Change-Id: I30ba62d208e6f63439600916fcd1c08a365ed69d	10 years ago
Alexei Gradinari	df3639700a	res_pjsip: disable multi domain to improve realtime performace ... This patch added new global pjsip option 'disable_multi_domain'. Disabling Multi Domain can improve Realtime performance by reducing number of database requests. ASTERISK-25930 #close Change-Id: I2e7160f3aae68475d52742107949a799aa2c7dc7	10 years ago
George Joseph	d8f0bc3572	res_pjsip_mwi: Add voicemail extension and mwi_subscribe_replaces_unsolicited ... res_pjsip_mwi was missing the chan_sip "vmexten" functionality which adds the Message-Account header to the MWI NOTIFY. Also, specifying mailboxes on endpoints for unsolicited mwi and on aors for subscriptions required that the admin know in advance which the client wanted. If you specified mailboxes on the endpoint, subscriptions were rejected even if you also specified mailboxes on the aor. Voicemail extension: * Added a global default_voicemail_extension which defaults to "". * Added voicemail_extension to both endpoint and aor. * Added ast_sip_subscription_get_dialog for support. * Added ast_sip_subscription_get_sip_uri for support. When an unsolicited NOTIFY is constructed, the From header is parsed, the voicemail extension from the endpoint is substituted for the user, and the result placed in the Message-Account field in the body. When a subscribed NOTIFY is constructed, the subscription dialog local uri is parsed, the voicemail_extension from the aor (looked up from the subscription resource name) is substituted for the user, and the result placed in the Message-Account field in the body. If no voicemail extension was defined, the Message-Account field is not added to the NOTIFY body. mwi_subscribe_replaces_unsolicited: * Added mwi_subscribe_replaces_unsolicited to endpoint. The previous behavior was to reject a subscribe if a previous internal subscription for unsolicited MWI was found for the mailbox. That remains the default. However, if there are mailboxes also set on the aor and the client subscribes and mwi_subscribe_replaces_unsolicited is set, the existing internal subscription is removed and replaced with the external subscription. This allows an admin to configure mailboxes on both the endpoint and aor and allows the client to select which to use. ASTERISK-25865 #close Reported-by: Ross Beer Change-Id: Ic15a9415091760539c7134a5ba3dc4a6a1217cea	10 years ago
George Joseph	5aa5c49413	sorcery/res_pjsip: Refactor for realtime performance ... There were a number of places in the res_pjsip stack that were getting all endpoints or all aors, and then filtering them locally. A good example is pjsip_options which, on startup, retrieves all endpoints, then the aors for those endpoints, then tests the aors to see if the qualify_frequency is > 0. One issue was that it never did anything with the endpoints other than retrieve the aors so we probably could have skipped a step and just retrieved all aors. But nevermind. This worked reasonably well with local config files but with a realtime backend and thousands of objects, this was a nightmare. The issue really boiled down to the fact that while realtime supports predicates that are passed to the database engine, the non-realtime sorcery backends didn't. They do now. The realtime engines have a scheme for doing simple comparisons. They take in an ast_variable (or list) for matching, and the name of each variable can contain an operator. For instance, a name of "qualify_frequency >" and a value of "0" would create a SQL predicate that looks like "where qualify_frequency > '0'". If there's no operator after the name, the engines add an '=' so a simple name of "qualify_frequency" and a value of "10" would return exact matches. The non-realtime backends decide whether to include an object in a result set by calling ast_sorcery_changeset_create on every object in the internal container. However, ast_sorcery_changeset_create only does exact string matches though so a name of "qualify_frequency >" and a value of "0" returns nothing because the literal "qualify_frequency >" doesn't match any name in the objset set. So, the real task was to create a generic string matcher that can take a left value, operator and a right value and perform the match. To that end, strings.c has a new ast_strings_match(left, operator, right) function. Left and right are the strings to operate on and the operator can be a string containing any of the following: = (or NULL or ""), !=, >, >=, <, <=, like or regex. If the operator is like or regex, the right string should be a %-pattern or a regex expression. If both left and right can be converted to float, then a numeric comparison is performed, otherwise a string comparison is performed. To use this new function on ast_variables, 2 new functions were added to config.c. One that compares 2 ast_variables, and one that compares 2 ast_variable lists. The former is useful when you want to compare 2 ast_variables that happen to be in a list but don't want to traverse the list. The latter will traverse the right list and return true if all the variables in it match the left list. Now, the backends' fields_cmp functions call ast_variable_lists_match instead of ast_sorcery_changeset_create and they can now process the same syntax as the realtime engines. The realtime backend just passes the variable list unaltered to the engine. The only gotcha is that there's no common realtime engine support for regex so that's been noted in the api docs for ast_sorcery_retrieve_by_fields. Only one more change to sorcery was done... A new config flag "allow_unqualified_fetch" was added to reg_sorcery_realtime. "no": ignore fetches if no predicate fields were supplied. "error": same as no but emit an error. (good for testing) "yes": allow (the default); "warn": allow but emit a warning. (good for testing) Now on to res_pjsip... pjsip_options was modified to retrieve aors with qualify_frequency > 0 rather than all endpoints then all aors. Not only was this a big improvement in realtime retrieval but even for config files there's an improvement because we're not going through endpoints anymore. res_pjsip_mwi was modified to retieve only endpoints with something in the mailboxes field instead of all endpoints then testing mailboxes. res_pjsip_registrar_expire was completely refactored. It was retrieving all contacts then setting up scheduler entries to check for expiration. Now, it's a single thread (like keepalive) that periodically retrieves only contacts whose expiration time is < now and deletes them. A new contact_expiration_check_interval was added to global with a default of 30 seconds. Ross Beer reports that with this patch, his Asterisk startup time dropped from around an hour to under 30 seconds. There are still objects that can't be filtered at the database like identifies, transports, and registrations. These are not going to be anywhere near as numerous as endpoints, aors, auths, contacts however. Back to allow_unqualified_fetch. If this is set to yes and you have a very large number of objects in the database, the pjsip CLI commands will attempt to retrive ALL of them if not qualified with a LIKE. Worse, if you type "pjsip show endpoint <tab>" guess what's going to happen? :) Having a cache helps but all the objects will have to be retrieved at least once to fill the cache. Setting allow_unqualified_fetch=no prevents the mass retrieve and should be used on endpoints, auths, aors, and contacts. It should NOT be used for identifies, registrations and transports since these MUST be retrieved in bulk. Example sorcery.conf: [res_pjsip] endpoint=config,pjsip.conf,criteria=type=endpoint endpoint=realtime,ps_endpoints,allow_unqualified_fetch=error ASTERISK-25826 #close Reported-by: Ross Beer Tested-by: Ross Beer Change-Id: Id2691e447db90892890036e663aaf907b2dc1c67	10 years ago
George Joseph	d2a1457e0b	res_pjsip/config_transport: Allow reloading transports. ... The 'reload' mechanism actually involves closing the underlying socket and calling the appropriate udp, tcp or tls start functions again. Only outbound_registration, pubsub and session needed work to reset the transport before sending requests to insure that the pjsip transport didn't get pulled out from under them. In my testing, no calls were dropped when a transport was changed for any of the 3 transport types even if ip addresses or ports were changed. To be on the safe side however, a new transport option was added (allow_reload) which defaults to 'no'. Unless it's explicitly set to 'yes' for a transport, changes to that transport will be ignored on a reload of res_pjsip. This should preserve the current behavior. Change-Id: I5e759850e25958117d4c02f62ceb7244d7ec9edf	10 years ago
George Joseph	953d1cc11a	pjsip/alembic: Add missing columns to system and registration ... ps_systems needed disable_tcp_switch ps_registrations needed line and endpoint ASTERISK-25737 #close Change-Id: Iaf9c2d69e62243d9fa53104c28c5339c47d4ac19	10 years ago
Joshua Colp	236896f391	Merge "pjsip: Add option global/regcontext" into 13	10 years ago
George Joseph	219c204a41	pjsip_sdp_rtp: Add option endpoint/bind_rtp_to_media_address ... On a system with multiple ip addresses in the same subnet, if a transport is bound to a specific ip address and endpoint/media_address is set, the SIP/SDP will have the correct address in all fields but the rtp stream MAY still originate from one of the other ip addresses, most probably the "primary" ip address. This happens because res_pjsip_sdp_rtp/create_rtp always calls ast_instance_new with the "all" ip address (0.0.0.0 or ::). The new option causes res_pjsip_sdp_rtp/create_rtp to call ast_rtp_instance_new with the endpoint's media_address (if specified) instead of the "all" address. This causes the packets to originate from the specified address. ASTERISK-25632 ASTERISK-25637 Reported-by: Olivier Krief Reported-by: Dan Journo Change-Id: I3dfaa079e54ba7fb7c4fd1f5f7bd9509bbf8bd88	10 years ago
Daniel Journo	22801a06ee	pjsip: Add option global/regcontext ... Added new global option (regcontext) to pjsip. When set, Asterisk will dynamically create and destroy a NoOp priority 1 extension for a given endpoint who registers or unregisters with us. ASTERISK-25670 #close Reported-by: Daniel Journo Change-Id: Ib1530c5b45340625805c057f8ff1fb240a43ea62	10 years ago
Kevin Harwell	c58091737d	res_pjsip_outbound_registration: registration stops due to fatal 4xx response ... During outbound registration it is possible to receive a fatal (any permanent/ non-temporary 4xx, 5xx, 6xx) response from the registrar that is simply due to a problem with the registrar itself. Upon receiving the failure response Asterisk terminates outbound registration for the given endpoint. This patch adds an option, 'fatal_retry_interval', that when set continues outbound registration at the given interval up to 'max_retries' upon receiving a fatal response. ASTERISK-25485 #close Change-Id: Ibc2c7b47164ac89cc803433c0bbe7063bfa143a2	10 years ago
Joshua Colp	2749721791	pjsip: Add rtp_timeout and rtp_timeout_hold endpoint options. ... This change adds support for the 'rtp_timeout' and 'rtp_timeout_hold' endpoint options. These allow the channel to be hung up if RTP is not received from the remote endpoint for a specified number of seconds. ASTERISK-25259 #close Change-Id: I3f39daaa7da2596b5022737b77799d16204175b9	10 years ago
Mark Michelson	b4e19e414a	res_pjsip: Add rtp_keepalive to sample config file. ... Change-Id: I5f62d0c5684f8b2335f9f8ac2d79ee04fbdafb19	10 years ago
Kevin Harwell	31c77b157b	res_pjsip: Add option to force G.726 to be treated as AAL2 packed. ... Some phones send g.726 audio packed for AAL2, which differs from what is recommended by RFC 3351. If Asterisk receives audio formatted as such when negotiating g.726 then it sounds a bit distorted. Added an option to res_pjsip_endpoint that allows g.726 negotiated audio to be treated as g.726 AAL2 packed. ASTERISK-25158 #close Reported by: Steve Pitts Change-Id: Ie7e21f75493d7fe53e75e12c971e72f5afa33615	11 years ago
Corey Farrell	3efe0df044	Sample Configs: Fix syntax error in pjsip.conf ... The sample pjsip.conf has a few comment lines that are missing the semicolons at the start of the comment, causing the config to fail load. Change-Id: I776a38c916a7df7ee3e072fd0b21dbf4cc457352	11 years ago
Joshua Colp	89f6719f7a	res_pjsip_outbound_registration: Add virtual line support. ... Virtual line support establishes a relationship between messages related to an outbound registration and a local endpoint. This is accomplished by attaching a parameter to the Contact of the outbound registration and looking for it on any received requests. If the parameter exists and can be matched to an outbound registration the configured endpoint is associated with the request. ASTERISK-24949 #close Reported by: Joshua Colp Change-Id: I7df909d2625479110a83fdd354c21ac539e8615d	11 years ago
George Joseph	674b18bdf0	pjsip_options: Add qualify_timeout processing and eventing ... This is the second follow-on to https://reviewboard.asterisk.org/r/4572/ and the discussion at http://lists.digium.com/pipermail/asterisk-dev/2015-March/073921.html The basic issues are that changes in contact status don't cause events to be emitted for the associated endpoint. Only dynamic contact add/delete actions update the endpoint. Also, the qualify timeout is fixed by pjsip at 32 seconds which is a long time. This patch makes use of the new transaction timeout feature in r4585 and provides the following capabilities... 1. A new aor/contact variable 'qualify_timeout' has been added that allows the user to specify the maximum time in milliseconds to wait for a response to an OPTIONS message. The default is 3000ms. When the timer expires, the contact is marked unavailable. 2. Contact status changes are now propagated up to the endpoint as follows... When any contact is 'Available', the endpoint is marked as 'Reachable'. When all contacts are 'Unavailable', the endpoint is marked as 'Unreachable'. The existing endpoint events are generated appropriately. ASTERISK-24863 #close Change-Id: Id0ce0528e58014da1324856ea537e7765466044a Tested-by: Dmitriy Serov Tested-by: George Joseph <george.joseph@fairview5.com>	11 years ago
George Joseph	1b6f6ff841	res_pjsip: Add global option to limit the maximum time for initial qualifies ... Currently when Asterisk starts initial qualifies of contacts are spread out randomly between 0 and qualify_timeout to prevent network and system overload. If a contact's qualify_frequency is 5 minutes however, that contact may be unavailable to accept calls for the entire 5 minutes after startup. So while staggering the initial qualifies is a good idea, basing the time on qualify_timeout could leave contacts unavailable for too long. This patch adds a new global parameter "max_initial_qualify_time" that sets the maximum time for the initial qualifies. This way you could make sure that all your contacts are initialy, randomly qualified within say 30 seconds but still have the contact's ongoing qualifies at a 5 minute interval. If max_initial_qualify_time is > 0, the formula is initial_interval = min(max_initial_interval, qualify_timeout * random(). If not set, qualify_timeout is used. The default is "0" (disabled). ASTERISK-24863 #close Change-Id: Ib80498aa1ea9923277bef51d6a9015c9c79740f4 Tested-by: George Joseph <george.joseph@fairview5.com>	11 years ago
Richard Mudgett	b1e9552b08	chan_pjsip: Add "rpid_immediate" option to prevent unnecessary "180 Ringing" messages. ... Incoming PJSIP call legs that have not been answered yet send unnecessary "180 Ringing" or "183 Progress" messages every time a connected line update happens. If the outgoing channel is also PJSIP then the incoming channel will always send a "180 Ringing" or "183 Progress" message when the outgoing channel sends the INVITE. Consequences of these unnecessary messages: * The caller can start hearing ringback before the far end even gets the call. * Many phones tend to grab the first connected line information and refuse to update the display if it changes. The first information is not likely to be correct if the call goes to an endpoint not under the control of the first Asterisk box. When connected line first went into Asterisk in v1.8, chan_sip received an undocumented option "rpid_immediate" that defaults to disabled. When enabled, the option immediately passes connected line update information to the caller in "180 Ringing" or "183 Progress" messages as described above. * Added "rpid_immediate" option to prevent unnecessary "180 Ringing" or "183 Progress" messages. The default is "no" to disable sending the unnecessary messages. ASTERISK-24781 #close Reported by: Richard Mudgett Review: https://reviewboard.asterisk.org/r/4473/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433338 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kevin Harwell	1f428f25f0	res_pjsip: Allow configuration of endpoint identifier query order ... This patch fixes previously reverted code that caused binary incompatibility problems with some modules. And like the original patch it makes sure that no matter what order the endpoint identifier modules were loaded, priority is given based on the ones specified in the new global 'endpoint_identifier_order' option. ASTERISK-24840 Reported by: Mark Michelson Review: https://reviewboard.asterisk.org/r/4489/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433028 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kevin Harwell	0497b7b155	Revert - res_pjsip: Allow configuration of endpoint identifier query order ... Due to a break in binary compatibility with some other modules these changes are being reverted until the issue can be resolved. ASTERISK-24840 Reported by: Mark Michelson git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432868 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kevin Harwell	110b99646c	res_pjsip: Allow configuration of endpoint identifier query order ... It's possible to have a scenario that will create a conflict between endpoint identifiers. For instance an incoming call could be identified by two different endpoint identifiers and the one chosen depended upon which identifier module loaded first. This of course causes problems when, for example, the incoming call is expected to be identified by username, but instead is identified by ip. This patch adds a new 'global' option to res_pjsip called 'endpoint_identifier_order'. It is a comma separated list of endpoint identifier names that specifies the order by which identifiers are processed and checked. ASTERISK-24840 #close Reported by: Mark Michelson Review: https://reviewboard.asterisk.org/r/4455/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432638 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	7890d0ad07	pjsip: Remove "contact" type from pjsip.conf.sample ... The "contact" object is not meant to be configured from the pjsip.conf configuration file. It is meant to be created as a result of a registration and stored elsewhere. ASTERISK-24085 #close Reported by: Rusty Newton git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431860 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Mark Michelson	8bc4a89e1f	Add support for the ca_list_path option for PJSIP transports. ... This allows for a path to be specified that has a collection of CA certificates in it. ASTERISK-24575 #close Reported by cloos Patches: pj-ca-path-trunk.diff uploaded by cloos (License #5956) Review: https://reviewboard.asterisk.org/r/4344 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430709 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	915bb88d3e	res_pjsip_keepalive: Add runtime configurable keepalive module for connection-oriented transports. ... Note that this is backport from trunk of r425825. This change adds a module which is configurable using the keep_alive_interval setting in the global section that will send a CRLF keep alive to all active connection-oriented transports at the provided interval. This is useful because it can help keep connections open through NATs. This functionality also exists within PJSIP but can not be controlled at runtime and requires recompiling it. Review: https://reviewboard.asterisk.org/r/4084/ ASTERISK-24644 #close git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430084 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	a0d9eab389	res_pjsip_sdp_rtp: Add support for optimistic SRTP. ... Optimistic SRTP is the ability to enable SRTP but not have it be a fatal requirement. If SRTP can be used it will be, if not it won't be. This gives you a better chance of using it without having your sessions fail when it can't be. Encrypt all the things! Review: https://reviewboard.asterisk.org/r/3992/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@428222 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Mark Michelson	27dc7e47d7	Make the disable_tcp_switch PJSIP system object enabled by default. ... Testing has shown repeatedly that PJSIP's default behavior of switching automatically to TCP for large messages can cause issues. The most common issues are that devices that we are communicating with do not handle the switch to TCP gracefully, thus causing situations such as broken calls or broken subscriptions. Now, in order to have this behavior happen, you must opt into it. The sample file has been updated to warn that enabling the TCP switch behavior may cause issues for you, so use at your own risk. git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@427334 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	b586e7f0b2	res_pjsip: Add disable_tcp_switch option. ... When a packet exceeds the MTU, pjproject will switch from UDP to TCP. In some circumstances (on some networks), this can cause some issues with messages not getting sent to the correct destination - and can also cause connections to get dropped due to quirks in pjproject deciding to terminate TCP connections with no messages. While fixing the routing/messaging issues is important, having a configuration option in Asterisk that tells pjproject to not switch over to TCP would be useful. That way, if some glitch is discovered on some other network/site, we can at least disable the behavior until a fix is put into place. AFS-197 #close Review: https://reviewboard.asterisk.org/r/4137/ ........ Merged revisions 427129 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@427130 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Scott Griepentrog	b3b93a7c15	pjsip: clarify tls cert and key file usage ... A question arose as to whether a .pem file could be provided in place of the .crt and .key files in a PJSIP TLS configuration. I tested this and discovered that although a cert will be read from the pem file, a key will not, and thus the priv_key_file entry is still required. This update to the fine documentation clarifies the option usage. AST-1448 #close Review: https://reviewboard.asterisk.org/r/4129/ Reported by: John Bigelow ........ Merged revisions 426928 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@426930 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
George Joseph	d3342fb98d	res_pjsip_phoneprov_provider: Provides pjsip integration with res_phoneprov ... This module allows res_pjsip to integrate with res_phoneprov. It handles the pjsip 'phoneprov' object type. Tested-by: George Joseph Review: https://reviewboard.asterisk.org/r/3976/ ........ Merged revisions 425007 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@425008 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kinsey Moore	ef2c567597	PJSIP: Restore functional default for callerid_privacy ... The pjsip config option default fixups from r424263 altered the functional default from "allowed_not_screened" to "allowed". This change restores the functional default value when none is provided. ........ Merged revisions 424426 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@424427 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	94105b30a6	res_pjsip: Make transport cipher option accept a comma separated list of cipher names. ... Improvements to the res_pjsip transport cipher option. * Made the cipher option accept a comma separated list of OpenSSL cipher names. Users of realtime will be glad if they have more than one name to list. * Added the CLI command 'pjsip list ciphers' so a user can know what OpenSSL names are available for the cipher option. * Updated the cipher option online XML documentation to specify what is expected for the value. * Updated pjsip.conf.sample to not indicate that ALL is acceptable since ALL does not imply a preference order for the ciphers and PJSIP does not simply pass the string to OpenSSL for interpretation. ASTERISK-24199 #close Reported by: Joshua Colp Review: https://reviewboard.asterisk.org/r/4018/ ........ Merged revisions 424393 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@424394 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Scott Griepentrog	1e620fe59e	res_pjsip: document use of rewrite_contact in sample conf ... Without setting rewrite_contact, an invite to an endpoint behind NAT will not reach it - unless the endpoint itself uses STUN or TURN to discover it's public URI. Thus, the use of this should be in the sample documentation. Review: https://reviewboard.asterisk.org/r/4036/ ........ Merged revisions 424337 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@424338 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	a1763a89a3	res_pjsip: Add 'dtls_fingerprint' option to configure DTLS fingerprint hash. ... During the latest update to DTLS-SRTP support the ability to configure the hash used for fingerprints was added. This gave us two supported ones: SHA-1 and SHA-256. The default was accordingly updated to SHA-256. Unfortunately this configuration ability was not exposed within res_pjsip. This change adds a dtls_fingerprint option that controls it. #SIPit31 ........ Merged revisions 424290 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@424291 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kinsey Moore	e3da76a352	PJSIP: Handle defaults properly ... This updates the code behind PJSIP configuration options with custom handlers to deal with the assigned default values properly where it makes sense and adjusting the default value where it doesn't. Before applying this patch, there were several cases where the default value for an option would prevent that config section from loading properly. Reported by: Thomas Thompson Review: https://reviewboard.asterisk.org/r/4019/ ........ Merged revisions 424263 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@424266 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Mark Michelson	048560f330	Add note about configuring list_items on a single line. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@422855 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Mark Michelson	a8ef508f5e	Add sample configuration for resource lists. ... On review /r/3977, it was recommended to note in the sample configuration about the size limitation for resource lists. However, since there was no section in the sample configuration at all for resource list subscriptions, I decided to make a separate commit where I have added the necessary sample configuration as well as the size limitation warning. git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@422853 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	fc0fecb476	configs: Move sample config files into a subdirectory of configs ... This moves all samples configs from configs/ to configs/samples. This allows for additional sets of sample configuration files to be added in the future. Review: https://reviewboard.asterisk.org/r/3804/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418870 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago