951 Commits (1e0040b88f83688e67d71521177cf4fa962bf32a)

Author	SHA1	Message	Date
Mark Michelson	a1f1cdbd87	Allow for transferer to retry when dialing an invalid extension. ... This allows for a configurable number of attempts for a transferer to dial an extension to transfer the call to. For Asterisk 13, the default values are such that upgrading between versions will not cause a behaivour change. For trunk, though, the defaults will be changed to be more user-friendly. Review: https://reviewboard.asterisk.org/r/4167 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@428145 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	30e6eed19d	res_pjsip: Fix XML typo and update CHANGES. ... ASTERISK-24199 ........ Merged revisions 424528 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@424529 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Mark Michelson	ef70c08dc7	Improve call forwarding reporting, especially with regards to ARI. ... This patch addresses a few issues: 1) The order of Dial events have been changed when performing a call forward. The order has now been altered to 1) Dial begins dialing channel A. 2) When A forwards the call to B, we issue the dial end event to channel A, indicating the dial is being canceled due to a forward to B. 3) When the call to channel B occurs, we then issue a new dial begin to channel B. 2) Call forwards are now reported on the calling channel, not the peer channel. 3) AMI DialEnd events have been altered to display the extension the call is being forwarded to when relevant. 4) You can now get the values of channel variables for channels that are not currently in the Stasis application. This brings the retrieval of channel variables more in line with the rest of channel read operations since they may be performed on channels not in Stasis. ASTERISK-24134 #close Reported by Matt Jordan ASTERISK-24138 #close Reported by Matt Jordan Patches: forward-shenanigans.diff uploaded by Matt Jordan (License #6283) Review: https://reviewboard.asterisk.org/r/3899 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@420794 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	95871451f6	app_queue: Add RealTime support for queue rules ... This patch gives the optional ability to keep queue rules in RealTime. It is important to note that with this patch: (a) Queue rules in RealTime are only examined on module load/reload (b) Queue rules are loaded both from the queuerules.conf file as well as the RealTime backend To inform app_queue to examine RealTime for queue rules, a new setting has been added to queuerules.conf's general section "realtime_rules". RealTime queue rules will only be used when this setting is set to "yes". The schema for the database table supports a rule_name, time, min_penalty, and max_penalty columns. min_penalty and max_penalty can be relative, if a '-' or '+' literal is provided. Otherwise, the penalties are treated as constants. For example: rule_name, time, min_penalty, max_penalty 'default', '10', '20', '30' 'test2', '20', '30', '55' 'test2', '25', '-11', '+1111' 'test2', '400', '112', '333' 'test3', '0', '4564', '46546' 'test_rule', '40', '15', '50' which would result in : Rule: default - After 10 seconds, adjust QUEUE_MAX_PENALTY to 30 and adjust QUEUE_MIN_PENALTY to 20 Rule: test2 - After 20 seconds, adjust QUEUE_MAX_PENALTY to 55 and adjust QUEUE_MIN_PENALTY to 30 - After 25 seconds, adjust QUEUE_MAX_PENALTY by 1111 and adjust QUEUE_MIN_PENALTY by -11 - After 400 seconds, adjust QUEUE_MAX_PENALTY to 333 and adjust QUEUE_MIN_PENALTY to 112 Rule: test3 - After 0 seconds, adjust QUEUE_MAX_PENALTY to 46546 and adjust QUEUE_MIN_PENALTY to 4564 Rule: test_rule - After 40 seconds, adjust QUEUE_MAX_PENALTY to 50 and adjust QUEUE_MIN_PENALTY to 15 If you use RealTime, the queue rules will be always reloaded on a module reload, even if the underlying file did not change. With the option disabled, the rules will only be reloaded if the file was modified. Review: https://reviewboard.asterisk.org/r/3607/ ASTERISK-23823 #close Reported by: Michael K patches: app_queue.c_realtime_trunk.patch uploaded by Michael K (License 6621) git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@420624 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	8b411f710b	Update CHANGES file ... git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@420609 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Jason Parker	2b804661bc	app_voicemail: Add the ability to specify multiple email addresses. ... ASTERISK-24045 Reported by: Jacob Barber Review: https://reviewboard.asterisk.org/r/3833/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@420577 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	47bf7efc4d	Multiple revisions 420089-420090,420097 ... ........ r420089 | mjordan | 2014-08-05 15:10:52 -0500 (Tue, 05 Aug 2014) | 72 lines ARI: Add channel technology agnostic out of call text messaging This patch adds the ability to send and receive text messages from various technology stacks in Asterisk through ARI. This includes chan_sip (sip), res_pjsip_messaging (pjsip), and res_xmpp (xmpp). Messages are sent using the endpoints resource, and can be sent directly through that resource, or to a particular endpoint. For example, the following would send the message "Hello there" to PJSIP endpoint alice with a display URI of sip:asterisk@mycooldomain.org: ari/endpoints/sendMessage?to=pjsip:alice&from=sip:asterisk@mycooldomain.org&body=Hello+There This is equivalent to the following as well: ari/endpoints/PJSIP/alice/sendMessage?from=sip:asterisk@mycooldomain.org&body=Hello+There Both forms are available for message technologies that allow for arbitrary destinations, such as chan_sip. Inbound messages can now be received over ARI as well. An ARI application that subscribes to endpoints will receive messages from those endpoints: { "type": "TextMessageReceived", "timestamp": "2014-07-12T22:53:13.494-0500", "endpoint": { "technology": "PJSIP", "resource": "alice", "state": "online", "channel_ids": [] }, "message": { "from": "\"alice\" <sip:alice@127.0.0.1>", "to": "pjsip:asterisk@127.0.0.1", "body": "Watson, come here.", "variables": [] }, "application": "testsuite" } The above was made possible due to some rather major changes in the message core. This includes (but is not limited to): - Users of the message API can now register message handlers. A handler has two callbacks: one to determine if the handler has a destination for the message, and another to handle it. - All dialplan functionality of handling a message was moved into a message handler provided by the message API. - Messages can now have the technology/endpoint associated with them. Various other properties are also now more easily accessible. - A number of ao2 containers that weren't really needed were replaced with vectors. Iteration over ao2_containers is expensive and pointless when the lifetime of things is well defined and the number of things is very small. res_stasis now has a new file that makes up its structure, messaging. The messaging functionality implements a message handler, and passes received messages that match an interested endpoint over to the app for processing. Note that inadvertently while testing this, I reproduced ASTERISK-23969. res_pjsip_messaging was incorrectly parsing out the 'to' field, such that arbitrary SIP URIs mangled the endpoint lookup. This patch includes the fix for that as well. Review: https://reviewboard.asterisk.org/r/3726 ASTERISK-23692 #close Reported by: Matt Jordan ASTERISK-23969 #close Reported by: Andrew Nagy ........ r420090 | mjordan | 2014-08-05 15:16:37 -0500 (Tue, 05 Aug 2014) | 2 lines Remove automerge properties :-( ........ r420097 | mjordan | 2014-08-05 16:36:25 -0500 (Tue, 05 Aug 2014) | 2 lines test_message: Fix strict-aliasing compilation issue ........ Merged revisions 420089-420090,420097 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420098 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Mark Michelson	94b21f94d3	Add ContactStatusDetail to PJSIPShowEndpoint AMI output. ... Now when running PJSIPShowEndpoint, you will receive a ContactStatusDetail for each bound contact that Asterisk is qualifying. This information includes the URI of the contact, current reachability, and roundtrip time. AFS-91 #close Reported by Mark Michelson Review: https://reviewboard.asterisk.org/r/3797 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419888 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Jonathan Rose	b744adb8aa	PJSIP: Send Notify AMI and CLI commands can now send to URI instead of endpoint ... Review: https://reviewboard.asterisk.org/r/3817/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419851 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	bbeaeea1a3	res_hep_rtcp: Add module that sends RTCP information to a Homer Server ... This patch adds a new module to Asterisk, res_hep_rtcp. The module subscribes to the RTCP topics in Stasis and receives RTCP information back from the message bus. It encodes into HEPv3 packets and sends the information to the res_hep module for transmission. Using this, someone with a Homer server can get live call quality monitoring for all RTP-based channels in their Asterisk 12+ systems. In addition, there were a few bugs in the RTP engine, res_rtp_asterisk, and chan_pjsip that were uncovered by the tests written for the Asterisk Test Suite. This patch fixes the following: 1) chan_pjsip failed to set its channel unique ids on its RTP instance on outbound calls. It now does this in the appropriate location, in the serialized call callback. 2) The rtp_engine was overflowing some values when packed into JSON. Specifically, some longs and unsigned ints can't be be packed into integer values, for obvious reasons. Since libjansson only supports integers, floats, strings, booleans, and objects, we print these values into strings. 3) res_rtp_asterisk had a few problems: (a) it would emit a source IP address of 0.0.0.0 if bound to that IP address. We now use ast_find_ourip to get a better IP address, and properly marshal the result into an ast_strdupa'd string. (b) Reports can be generated with no report bodies. In particular, this occurs when a sender is transmitting information to a receiver (who will send no RTP back to the sender). As such, the sender has no report body for what it received. We now properly handle this case, and the sender will emit SR reports with no body. Likewise, if we receive an RTCP packet with no report body, we will still generate the appropriate events. ASTERISK-24119 #close ........ Merged revisions 419823 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419825 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	355dc3d2ad	Multiple revisions 419565-419566 ... ........ r419565 | mjordan | 2014-07-25 09:41:23 -0500 (Fri, 25 Jul 2014) | 21 lines ARI: report duration values in LiveRecording objects This patch adds three new fields to the LiveRecording model: - total_duration: the total length of the live recording - talking_duration: optional. The duration of talking energy that was detected while the recording was made. - silence_duration: optional. The duration of silence that was detected while the recording was made. These values are reported in the RecordingFinished ARI event. When a DSP is enabled on the channel during the recording - which occurs when the recording is created with max_silence_seconds (indicating that the user actually cares about how much silence is in the file), we will report the talking_duration and silence_duration in addition to the total_duration. Review: https://reviewboard.asterisk.org/r/3770/ ASTERISK-24037 #close Reported by: Samuel Galarneau ........ r419566 | mjordan | 2014-07-25 09:46:15 -0500 (Fri, 25 Jul 2014) | 1 line Update CHANGES for r419565 ........ Merged revisions 419565-419566 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419567 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	a2ce95d9d2	accountcode: Slightly change accountcode propagation. ... The previous behavior was to simply set the accountcode of an outgoing channel to the accountcode of the channel initiating the call. It was done this way a long time ago to allow the accountcode set on the SIP/100 channel to be propagated to a local channel so the dialplan execution on the Local;2 channel would have the SIP/100 accountcode available. SIP/100 -> Local;1/Local;2 -> SIP/200 Propagating the SIP/100 accountcode to the local channels is very useful. Without any dialplan manipulation, all channels in this call would have the same accountcode. Using dialplan, you can set a different accountcode on the SIP/200 channel either by setting the accountcode on the Local;2 channel or by the Dial application's b(pre-dial), M(macro) or U(gosub) options, or by the FollowMe application's b(pre-dial) option, or by the Queue application's macro or gosub options. Before Asterisk v12, the altered accountcode on SIP/200 will remain until the local channels optimize out and the accountcode would change to the SIP/100 accountcode. Asterisk v1.8 attempted to add peeraccount support but ultimately had to punt on the support. The peeraccount support was rendered useless because of how the CDR code needed to unconditionally force the caller's accountcode onto the peer channel's accountcode. The CEL events were thus intentionally made to always use the channel's accountcode as the peeraccount value. With the arrival of Asterisk v12, the situation has improved somewhat so peeraccount support can be made to work. Using the indicated example, the the accountcode values become as follows when the peeraccount is set on SIP/100 before calling SIP/200: SIP/100 ---> Local;1 ---- Local;2 ---> SIP/200 acct: 100 \/ acct: 200 \/ acct: 100 \/ acct: 200 peer: 200 /\ peer: 100 /\ peer: 200 /\ peer: 100 If a channel already has an accountcode it can only change by the following explicit user actions: 1) A channel originate method that can specify an accountcode to use. 2) The calling channel propagating its non-empty peeraccount or its non-empty accountcode if the peeraccount was empty to the outgoing channel's accountcode before initiating the dial. e.g., Dial and FollowMe. The exception to this propagation method is Queue. Queue will only propagate peeraccounts this way only if the outgoing channel does not have an accountcode. 3) Dialplan using CHANNEL(accountcode). 4) Dialplan using CHANNEL(peeraccount) on the other end of a local channel pair. If a channel does not have an accountcode it can get one from the following places: 1) The channel driver's configuration at channel creation. 2) Explicit user action as already indicated. 3) Entering a basic or stasis-mixing bridge from a peer channel's peeraccount value. You can specify the accountcode for an outgoing channel by setting the CHANNEL(peeraccount) before using the Dial, FollowMe, and Queue applications. Queue adds the wrinkle that it will not overwrite an existing accountcode on the outgoing channel with the calling channels values. Accountcode and peeraccount values propagate to an outgoing channel before dialing. Accountcodes also propagate when channels enter or leave a basic or stasis-mixing bridge. The peeraccount value only makes sense for mixing bridges with two channels; it is meaningless otherwise. * Made peeraccount functional by changing accountcode propagation as described above. * Fixed CEL extracting the wrong ie value for the peeraccount. This was done intentionally in Asterisk v1.8 when that version had to punt on peeraccount. * Fixed a few places dealing with accountcodes that were reading from channels without the lock held. AFS-65 #close Review: https://reviewboard.asterisk.org/r/3601/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419520 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Michael L. Young	f613fc24fb	core/bridge_channel: Substitute Variables In Features Application Map ... Say you wanted to include variables in an application map and have those variables substituted and passed along to the application being executed; currently this does not happen. This patch adds this ability to pass channel variable values to an application before being executed. ASTERISK-22608 #close Reported by: Michael L. Young patches: features_substitute_arguments_v2.diff uploaded by Michael L. Young (license 5026) Review: https://reviewboard.asterisk.org/r/3819/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419252 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Michael L. Young	20cb961b3e	apps/app_mixmonitor: Add Options To Play Beep At Start Or Stop ... We have a new periodic beep feature but sometimes a user needs some sort of feedback, without the need to have a periodic beep during the recording, to let them know that MixMonitor started recording or ended the recording. The use case where this patch is being used is when using Dynamic Features to start and end MixMonitor. This patch adds an option to play a beep when MixMonitor starts and an option to play a beep when MixMonitor ends. ASTERISK-24051 #close Reported by: Michael L. Young patches: mixmonitor-play-beep-start-stop.diff uploaded by Michael L. Young (license 5026) Review: https://reviewboard.asterisk.org/r/3820/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419238 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	b299052e20	ari: Add a copy operation for stored recordings ... This patch adds a new operation for stored recordings, copy. It takes an existing stored recording and makes a copy of it in the same directory or a relative directory under the stored recording directory. /ari/recordings/stored/{recordingName}/copy?destinationRecordingName={copy_name} This is particularly useful for voicemail-esque applications, which may need to copy or move recordings around a directory structure. Review: https://reviewboard.asterisk.org/r/3768/ ASTERISK-24036 #close Reported by: Sam Galarneau Tested by: Sam Galarneau ........ Merged revisions 419021 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419022 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Jonathan Rose	af4cd65143	Channels: Masquerades to automatically move frame/audio hooks ... Whenever possible, audiohooks and framehooks will now be copied over to the channel that the masquerading channel gets cloned into. This should occur for all audiohooks and most framehooks. As a result, in Asterisk 12.5 and up, the AUDIOHOOK_INHERIT function is now deprecated and its behavior is essentially the new default for all audiohooks, plus some additional audiohooks/framehooks. Review: https://reviewboard.asterisk.org/r/3721/ ........ Merged revisions 418914 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418936 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Jonathan Rose	5c988cc4e6	res_fax: Provide AMI equivalents for fax CLI commands ... Specifically the following equivalents were created: fax show session -> FAXSession fax show sessions -> FAXSessions fax show stats -> FAXStats Review: https://reviewboard.asterisk.org/r/3666/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418911 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	fd94fea599	res_pjsip: Support setting a default accountcode on endpoints ... Most channel drivers let you specify a default accountcode to be set on channels associated with a particular peer/endpoint/object. Prior to this patch, chan_pjsip/res_pjsip did not support such a setting. This patch adds a new setting to the res_pjsip endpoint object, 'accountcode'. When a channel is created that is associated with an endpoint with this value set, the channel will automatically have its accountcode property set to the value configured for the endpoint. Review: https://reviewboard.asterisk.org/r/3724/ ASTERISK-24000 #close Reported by: Matt Jordan ........ Merged revisions 418756 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418757 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	03e9c598e5	cel_pgsql, cdr_pgsql, res_config_pgsql: Add PostgreSQL application_name support ... This patch adds support for the PostgreSQL application_name connection setting. When the appropriate PostgreSQL module's configuration is set with an application name, the name will be passed to PostgreSQL on connection and displayed in the database's pg_stat_activity view, as well as in CSV logs. This aids in managing which applications/servers are connected to a PostgreSQL database, as well as tracing the activity of those connections. Review: https://reviewboard.asterisk.org/r/3591 ASTERISK-23737 #close Reported by: Gergely Domodi patches: pgsql_application_name.patch uploaded by Gergely Domodi (License 6610) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418755 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	97834718c2	Remove many deprecated modules ... Billing records are fair, To get paid is quite bright, You should really use ODBC; Good-bye cdr_sqlite. Microsoft did once push H.323, Hell, we all remember NetMeeting. But try to compile chan_h323 now And you will take quite a beating. The XMPP and SIP war was fierce, And in the distant fray Was birthed res_jabber/chan_jingle; But neither to stay. For everyone did care and chase what Google professed. "Free Internet Calling" was what devotees cried, But Google did change the specs so often That the developers were happy the day chan_gtalk died. And then there was that odd application Dedicated to the Polish tongue. app_saycountpl was subsumed by Say; One could say its bell was rung. To read and parse a file from the dialplan You could (I guess) use an application. app_readfile did fill that purpose, but I think A function is perhaps better in its creation. Barging is rude, I'm not sure why we do it. Inwardly, the caller will probably sigh. But if you really must do it, Don't use app_dahdibarge, use ChanSpy. We all despise the sound of tinny robots It makes our queues so cold. To control such an abomination It's better to not use Wait/SetMusicOnHold. It's often nice to know properties of a channel It makes our calls right We have a nice function called CHANNEL And so SIPCHANINFO is sent off into the night. And now things get odd; Apparently one could delimit with a colon Properties from the SIPPEER function! Commas are in; all others are done. Finally, a word on pipes and commas. We're sorry. We can't say it enough. But those compatibility options in asterisk.conf; To maintain them forever was just too tough. This patch removes: * cdr_sqlite * chan_gtalk * chan_jingle * chan_h323 * res_jabber * app_saycountpl * app_readfile * app_dahdibarge It removes the following applications/functions: * WaitMusicOnHold * SetMusicOnHold * SIPCHANINFO It removes the colon delimiter from the SIPPEER function. Finally, it also removes all compatibility options that were configurable from asterisk.conf, as these all applied to compatibility with Asterisk 1.4 systems. Review: https://reviewboard.asterisk.org/r/3698/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418019 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Jonathan Rose	bc4b236d71	chan_dahdi: Add AMI commands for controlling PRI debugging output ... Adds the following AMI commands: PRIDebugSet - Set PRI debug levels for a specific span PRIDebugFileSet - Set the file used for PRI debug message output PRIDebugFileUnset - Disables file output for PRI debug messages Review: https://reviewboard.asterisk.org/r/3681/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417916 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Jonathan Rose	04a9123309	pbx_config: Add manager actions to add/remove extensions ... Adds two new manager commands to pbx_config - DialplanExtensionAdd and DialplanExtensionRemove which allow manager users to create and delete extensions respectively. Review: https://reviewboard.asterisk.org/r/3650/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417910 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	eaee92198d	main/tcptls: Add support for Perfect Forward Secrecy ... This patch enables Perfect Forward Secrecy (PFS) in Asterisk's core TLS API. Modules that wish to enable PFS should consider the following: - Ephemeral ECDH (ECDHE) is enabled by default. To disable it, do not specify a ECDHE cipher suite in a module's configuration, for example: tlscipher=AES128-SHA:DES-CBC3-SHA - Ephemeral DH (DHE) is disabled by default. To enable it, add DH parameters into the private key file, i.e., tlsprivatekey. For an example, see the default dh2048.pem at http://www.opensource.apple.com/source/OpenSSL098/OpenSSL098-35.1/src/apps/dh2048.pem?txt - Because clients expect the server to prefer PFS, and because OpenSSL sorts its cipher suites by bit strength, (see "openssl ciphers -v DEFAULT") consider re-ordering your cipher suites in the conf file. For example: tlscipher=AES128+kEECDH:AES128+kEDH:3DES+kEDH:AES128-SHA:DES-CBC3-SHA:-ADH:-AECDH will use PFS when offered by the client. Clients which do not offer PFS fall-back to AES-128 (or even 3DES as recommend by RFC 3261). Review: https://reviewboard.asterisk.org/r/3647/ ASTERISK-23905 #close Reported by: Alexander Traud patches: tlsPFS_for_HEAD.patch uploaded by Alexander Traud (License 6520) tlsPFS.patch uploaded by Alexander Traud (License 6520) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417803 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	af90afd90c	app_voicemail, say: Add support for Japanese Language ... This patch adds support for the Japanese language to both the say family of applications, as well as for VoiceMail and VoiceMailMain. A new pack of language sounds will be released at the same time as the next major version of Asterisk to support the new language features. The language features can be enabled using a language code of 'ja'. Review: https://reviewboard.asterisk.org/r/3477 ASTERISK-23324 #close Reported by: Kevin McCoy patches: app_voicemail.c.20140226.jb.patch uploaded by Kevin McCoy (License 6586) say.c.20140226.jb.patch uploaded by Kevin McCoy (License 6586) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417591 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kinsey Moore	1337daf88a	CHANGES: Add missing changes ... Add missing CHANGES changes from r417361 and r417383. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417423 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	22e62ac6f6	app_jack: Support audio with a sampling rate higher than 8kHz ... This patch enables the jack-audiohook to cope with dynamic sampling rates from and to Asterisk. Information from the channel is taken to derive the channel's sampling rate, suiting SLINxx format and frame->datalen. There are stil a few limitations after this patch: * Required information is taken from the channel during initialization as the audiohook does not provide this information. Audiohook.internal_sampl_rate(...) is set later, but no callback is available to inform app_jack. * Frame.datalen is computed using "rate / 50" assuming a ptime of 20ms. There is no internal API available to determine datalen for a SLINxx. * Ringbuffer size is now dynamic depending on the value of frame.datalen (see above) and the number of frames, which are in RINGBUFFER_FRAME_CAPACITY, that need to fit. Review: https://reviewboard.asterisk.org/r/3618 Note that the patch being committed here is based on the patch posted on ASTERISK-23836. However, Matthis Schmieder also provided a patch to enable this functionality, and that patch is noted below. ASTERISK-20696 #close Reported by: Matthis Schmieder patches: app_jack.patch uploaded by Matthis Schmieder (License 6445) ASTERISK-23836 #close Reported by: Dennis Guse patches: patch-app_jack.c uploaded by Dennis Guse (License 6513) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417360 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	e087ae0c02	Logger: Add manager command 'LoggerRotate' to rotate logger ... Part of a series of AMI command equivalents to existing CLI commands Review: https://reviewboard.asterisk.org/r/3651/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@416848 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	0c896d8b9b	chan_dahdi: Adds support for major update to libss7. ... * SS7 support now requires libss7 v2.0 or later. The new libss7 is not backwards compatible. * Added SS7 support for connected line and redirecting. * Most SS7 CLI commands are reworked as well as new SS7 commands added. See online CLI help. * Added several SS7 config option parameters described in chan_dahdi.conf.sample. * ISUP timer support reworked and now requires explicit configuration. See ss7.timers.sample. Special thanks to Kaloyan Kovachev for his support and persistence in getting the original patch by adomjan updated and ready for release. SS7-27 #close Reported by: adomjan git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@416416 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	53968c00b3	TALK_DETECT: A channel function that raises events when talking is detected ... This patch adds a new channel function TALK_DETECT that, when set on a channel, causes events indicating the start/stop of talking on a channel to be emitted to both AMI and ARI clients. The function allows setting both the silence threshold (the length of silence after which we decide no one is talking) as well as the talking threshold (the amount of energy that counts as talking). Parameters can be updated on a channel after talk detection has been enabled, and talk detection can be removed at any time. The events raised by the function use a nomenclature similar to existing AMI/ARI events. For AMI: ChannelTalkingStart/ChannelTalkingStop For ARI: ChannelTalkingStarted/ChannelTalkingFinished Review: https://reviewboard.asterisk.org/r/3563/ #ASTERISK-23786 #close Reported by: Matt Jordan ........ Merged revisions 414934 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@414935 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	a5aea0cca0	app_agent_pool: Return to dialplan if the agent fails to ack the call. ... Improvements to the agent pool functionality. * AgentRequest no longer hangs up the caller if the agent fails to connect with the caller. It now continues in the dialplan. * AgentRequest returns AGENT_STATUS set to NOT_CONNECTED if the agent failed to connect with the call. Most likely because the agent did not acknowledge the call in time or got disconnected. * The agent alerting play file configured by the agent.conf custom_beep option can now be disabled by setting the option to an empty string. The agent is effectively alerted to a call presence when MOH stops. * Fixed bridge reference leak when the agent connects with a caller. ASTERISK-23499 #close Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/3551/ ........ Merged revisions 414747 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@414748 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Scott Griepentrog	cf21644d6a	ARI: Add ability to raise arbitrary User Events ... User events can now be generated from ARI. Events can be signalled with arbitrary json variables, and include one or more of channel, bridge, or endpoint snapshots. An application must be specified which will receive the event message (other applications can subscribe to it). The message will also be delivered via AMI provided a channel is attached. Dialplan generated user event messages are still transmitted via the channel, and will only be received by a stasis application they are attached to or if the channel is subscribed to. This change also introduces the multi object blob mechanism used to send multiple snapshot types in a single message. The dialplan app UserEvent was also changed to use multi object blob, and a new stasis message type created to handle them. ASTERISK-22697 #close Review: https://reviewboard.asterisk.org/r/3494/ ........ Merged revisions 414405 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@414406 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	57372e61d2	Parking: Add 'AnnounceChannel' argument to manager action 'Park' ... (closes ASTERISK-23397) Reported by: Denis Review: https://reviewboard.asterisk.org/r/3446/ ........ Merged revisions 413196 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413197 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Mark Michelson	7dd64ff993	Add DeviceStateChanged and PresenceStateChanged AMI events. ... These events are controlled by two new modules, res_manager_devicestate and res_manager_presencestate. Review: https://reviewboard.asterisk.org/r/3417 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413060 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Igor Goncharovskiy	d3433771c9	Introducing changes proposed to chan_unistim driver: ...	12 years ago
Jonathan Rose	86c68bc437	chan_sip: trust_id_outbound CHANGES message improvement ... (closes issue AST-1301) (closes issue ASTERISK-19465) Reported by: Krzysztof Chmielewski ........ Merged revisions 412821 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 412822 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 412823 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412824 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	ae21162a69	chan_sip: Add sendrpid trust options ... In r411189, some behavior was changed which made sendrpid behavior act in a more trusting manner by sending full user data for peers set with private caller presence in P-Asserted-Identity headers. Since this changed long time expected behaviors, we decided to pull that patch when that was pointed out by the community. Instead, this patch provides a trust_id_outbound setting which will expose the data per RFC-3325 if set to 'yes' and simply not send the PAI/RPID headers at all if set to 'no'. By default trust_id_outbound will be set to 'legacy' which will preserve the behavior prior to these patches. Extra special thanks to Walter Doekes for providing advice and feedback. (closes issue AST-1301) (closes issue ASTERISK-19465) Reported by: Krzysztof Chmielewski Review: https://reviewboard.asterisk.org/r/3447/ ........ Merged revisions 412744 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 412746 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 412747 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412759 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	b9d7dfcc62	ARI: Make bridges/{bridgeID}/play queue sound files ... Previously multiple play actions against a bridge at one time would cause the sounds to play simultaneously on the bridge. Now if a sound is already playing, the play action will queue playback to occur after the completion of other sounds currently on the queue. (closes issue ASTERISK-22677) Reported by: John Bigelow Review: https://reviewboard.asterisk.org/r/3379/ ........ Merged revisions 412639 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412641 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	a8742e327f	ARI: Add tones playback resource ... Adds a tones URI type to the playback resource. The tone can be specified by name (from indications.conf) or by a tone pattern. In addition, tonezone can be specified in the URI (by appending ;tonezone=<zone>). Tones must be stopped manually in order for a stasis control to move on from playback of the tone. Tones may be paused, resumed, restarted, and stopped. They may not be rewound or fast forwarded (tones can't be controlled in a way that lets you skip around from note to note and pausing and resuming will also restart the tone from the beginning). Tests are currently in development for this feature (https://reviewboard.asterisk.org/r/3428/). (closes issue ASTERISK-23433) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/3427/ ........ Merged revisions 412535 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412536 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	7d26eefce4	chan_sip: Add SIPURIPHONECONTEXT channel variable for Request TEL URIs ... This patch is a continuation of https://reviewboard.asterisk.org/r/3349/, committed in r412303. It resolves a finding oej had that the phone-context be available in a channel variable separate from SIPDOMAIN. This patch adds that variable as SIPURIPHONECONTEXT. It also allows a local number (or global number specified in the TEL URI) to be used to look up as a peer. (issue ASTERISK-17179) Review: https://reviewboard.asterisk.org/r/3349/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412467 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Russell Bryant	5b7a769fd8	(mix)monitor: Add options to enable a periodic beep ... Add an option to enable a periodic beep to be played into a call if it is being recorded. If enabled, it uses the PERIODIC_HOOK() function internally to play the 'beep' prompt into the call at a specified interval. This option is provided for both Monitor() and MixMonitor(). Review: https://reviewboard.asterisk.org/r/3424/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412427 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	eed03fc01a	chan_sip: Support RFC-3966 TEL URIs in inbound INVITE requests ... This patch adds support for handling TEL URIs in inbound INVITE requests. This includes the Request URI and the From URI. The number specified in the Request URI will be the destination of the inbound channel in the dialplan. The phone-context specified in the Request URI will be stored in the TELPHONECONTEXT channel variable. Review: https://reviewboard.asterisk.org/r/3349 ASTERISK-17179 #close Reported by: Geert Van Pamel Tested by: Geert Van Pamel patches: asterisk-12.0.0-chan_sip-RFC3966_patch.txt uploaded by Geert Van Pamel (License 6140) asterisk-12.0.0-reqresp_parser-RFC3966_patch.txt uploaded by Geert Van Pamel (License 6140) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412292 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Mark Michelson	755696dcd0	Add a Command header to the AMI Mixmonitor action. ... This fixes a parsing error that occurred during the processing of the AMI action. The error did not result in MixMonitor itself misbehaving, but it could result in the AMI response not giving correct information back. The new header allows for one to specify a post-process command to run when recording finishes. Previously, in order to do this, the post-process command would have to be placed at the end of the Options: header. Patches: mixmonitor_command_2.patch by jhardin (License #6512) ........ Merged revisions 412048 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412050 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Russell Bryant	ea290b2c3e	func_periodic_hook: New function for periodic hooks. ... This commit introduces a new dialplan function, PERIODIC_HOOK(). It allows you run to a dialplan hook on a channel periodically. The original use case that inspired this was the ability to play a beep periodically into a call being recorded. The implementation is much more generic though and could be used for many other things. The implementation makes heavy use of existing Asterisk components. It uses a combination of Local channels and ChanSpy() to run some custom dialplan and inject any audio it generates into an active call. The other important bit of the implementation is how it figures out when to trigger the beep playback. This implementation uses the audiohook API, even though it's not actually touching the audio in any way. It's a convenient way to get a callback and check if it's time to kick off another beep. It would be nice if this was timer event based instead of polling based, but unfortunately I don't see a way to do it that won't interfere with other things. Review: https://reviewboard.asterisk.org/r/3362/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411768 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	ef0c9fe4d8	res_hep/res_hep_pjsip: Add a HEPv3 capture agent module and a logger for PJSIP ... This patch adds the following: (1) A new module, res_hep, which implements a generic packet capture agent for the Homer Encapsulation Protocol (HEP) version 3. Note that this code is based on a patch provided by Alexandr Dubovikov; I basically just wrapped it up, added configuration via the configuration framework, and threw in a taskprocessor. (2) A new module, res_hep_pjsip, which forwards all SIP message traffic that passes through the res_pjsip stack over to res_hep for encapsulation and transmission to a HEPv3 capture server. Much thanks to Alexandr for his Asterisk patch for this code and for a *lot* of patience waiting for me to port it to 12/trunk. Due to some dithering on my part, this has taken the better part of a year to port forward (I still blame CDRs for the delay). ASTERISK-23557 #close Review: https://reviewboard.asterisk.org/r/3207/ ........ Merged revisions 411534 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411556 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	597f25db69	Update API versions and UPGRADE/CHANGES for 12.2.0 ... This patch does the following: * It updates the AMI version to 2.2.0 to indicate backwards compatible changes have been made since the last release * It updates the ARI version to 1.2.0 to indicate backwards compatible changes have been made since the last release * It updates the UPGRADE/CHANGES files with changes that were not mentioned ........ Merged revisions 411529 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411530 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Joshua Colp	1cf74b8776	res_stasis: Extend bridge type to be a comma separated list of bridge attributes. ... This change turns the bridge type field into a comma separated list of attributes. These attributes include: mixing, holding, dtmf_events, and proxy_media. By setting the various attributes a user can control the type of bridge created with the behavior they need for their application. (closes issue ASTERISK-23437) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/3359/ ........ Merged revisions 410904 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410905 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Joshua Colp	cc40bf5317	res_pjsip: Enable PJSIP DNS client support. ... This change enables DNS client support within PJSIP. System nameservers are automatically discovered using res_init or res_ninit. If this fails then PJSIP will resort to using gethostbyname for resolution. By enabling this support we gain SRV support, failover, and weight support. (closes issue ASTERISK-23435) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/3343/ ........ Merged revisions 410795 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410796 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Scott Griepentrog	9e9707f90f	uniqueid: Update CHANGES to reflect new features ... Note the new features provided by uniqueid in the CHANGES file. (issue ASTERISK-23120) Review: https://reviewboard.asterisk.org/r/3316/ ........ Merged revisions 410588 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410589 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	ff63012c4e	PJSIP: TOS values should be represented as decimals in sorcery objects ... (closes issue ASTERISK-23235) Reported by: George Joseph Review: https://reviewboard.asterisk.org/r/3324/ ........ Merged revisions 410574 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410575 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
George Joseph	a4906e9f86	sorcery: Create AST_SORCERY dialplan function. ... This patch creates the AST_SORCERY dialplan function which allows someone to retrieve any value from a sorcery-based config file. It's similar to AST_CONFIG. The creation of the function itself was fairly straightforward but it required changes to the underlying sorcery infrastructure that rippled into individual sorcery objects. The changes stemmed from inconsistencies in how sorcery created ast_variable objectsets from sorcery objects and the inconsistency in how individual objects used that feature especially when it came to parameters that can be specified multiple times like contact in aor and match in identify. You can read more here... http://lists.digium.com/pipermail/asterisk-dev/2014-February/065202.html So, what this patch does, besides actually creating the AST_SORCERY function, is the following... * Creates ast_variable_list_append which is a helper to append one ast_variable list to another. * Modifies the ast_sorcery_object_field_register functions to accept the already-defined sorcery_fields_handler callback. * Modifies ast_sorcery_objectset_create to accept a parameter indicating return type preference...a single ast_variable with all values concatenated or an ast_variable list with multiple entries. Also fixed a few bugs. * Modifies individual sorcery object implementations to use the new function definition of the ast_sorcery_object_field_register functions. * Modifies location.c and res_pjsip_endpoint_identifier_ip.c to implement sorcery_fields_handler handlers so they return multiple occurrences as an ast_variable_list. * Added a whole bunch of tests to test_sorcery. (closes issue ASTERISK-22537) Review: http://reviewboard.asterisk.org/r/3254/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410042 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Joshua Colp	3f730662f7	res_stasis_recording: Add a "target_uri" field to recording events. ... This change adds a target_uri field to the live recording object. It contains the URI of what is being recorded. (closes issue ASTERISK-23258) Reported by: Ben Merrills Review: https://reviewboard.asterisk.org/r/3299/ ........ Merged revisions 410025 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410027 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kinsey Moore	fe1e8e55a1	Logger: Add dynamic logger channels ... This adds the ability to dynamically add and remove logger channels from Asterisk via the CLI. (closes issue AST-1150) Review: https://reviewboard.asterisk.org/r/3185/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407989 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	cbaa27142c	security_events: Add AMI documentation; output optional fields ... This patch adds documentation for the Security Events that are emited over AMI. It also notes these events in the UPGRADE/CHANGES file. ........ Merged revisions 407589 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407602 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	5a48613cb4	CHANGES: Improved description of Name/Creator changes to bridge ARI, adds AMI ... The changes log was written with language that was a little too internal Asterisk specific, so it's been changed to be more in the frame of reference of an ARI user. Also, previously the AMI event changes were omitted from the change log as well as the ability to include a bridge name in the ARI post bridges command. ........ Merged revisions 407461 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407462 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	a610bfa9e8	CHANGES: Update changes log to include r403414 entry ... Adds note of additional 0 for operator option on app_record git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407425 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	7f18df5699	CHANGES: Update changes log to include new bridge fields added in r404042 ... ........ Merged revisions 407419 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407422 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	9b93917896	ARI/AMI: Update versions; update UPGRADE/CHANGES notes for 12.1.0 changes ... Due to backwards compatible changes made to AMI/ARI, the version needs to be bumped to 1.1.0/2.1.0, respectively. ........ Merged revisions 407402 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407407 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kevin Harwell	10e38fb10c	res_pjsip: Config option to enable PJSIP logger at load time. ... Added a "debug" configuration option for res_pjsip that when set to "yes" enables SIP messages to be logged. It is specified under the "system" type. Also added an alembic script to add the option to realtime. (closes issue ASTERISK-23038) Reported by: Rusty Newton Review: https://reviewboard.asterisk.org/r/3148/ ........ Merged revisions 407036 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407037 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	aeb4466656	ChanSpy: Add ability to specify channel uniqueids as well as channel names. ... * Made ChanSpy accept a channel uniqueid or a fully specified channel name as the chanprefix parameter if the 'u' option is specified. (closes issue AFS-42) Review: https://reviewboard.asterisk.org/r/3160/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407033 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kevin Harwell	8f82eb0098	manager: ExtensionStatus event status human readable ... Added a note in the changes file about the new 'StatusText' field that was added to the 'ExtensionStatus' event. (issue ASTERISK-23154) Reported by: Jonathan Rose git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@406696 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	2a9d15b400	Thread Debugging: Add LWP to core show locks output ... This patch adds the LWP to core show locks output if it is available. Review: https://reviewboard.asterisk.org/r/3142/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@406416 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Walter Doekes	72cb7a254f	Enable wide band audio in musiconhold streams. ... Review: https://reviewboard.asterisk.org/r/3112/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405766 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	3c90fc0bfd	Make 12 - 12.1 CHANGES log the same as in 12 ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405589 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	8ba05ae67e	Include CHANGES info for r405553 ... ........ Merged revisions 405585 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405586 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kevin Harwell	821ab51381	res_pjsip: add 'set_var' support on endpoints ... Added a new 'set_var' option for ast_sip_endpoint(s). For each variable specified that variable gets set upon creation of a pjsip channel involving the endpoint. (closes issue ASTERISK-22868) Reported by: Joshua Colp Review: https://reviewboard.asterisk.org/r/3095/ ........ Merged revisions 404663 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404664 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	dbead14c3b	Put notice in CHANGES as well as UPGRADE.txt. ... ........ Merged revisions 404375 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404376 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	e4803bbd9e	Voicemail: Remove mailbox identifier format (box@context) assumptions in the system. ... This change is in preparation for external MWI support. Removed code from the system for normal mailbox handling that appends @default to the mailbox identifier if it does not have a context. The only exception is the legacy hasvoicemail users.conf option. The legacy option will only work for app_voicemail mailboxes. The system cannot make any assumptions about the format of the mailbox identifer used by app_voicemail. chan_sip and chan_dahdi/sig_pri had the most changes because they both tried to interpret the mailbox identifier. chan_sip just stored and compared the two components. chan_dahdi actually used the box information. The ISDN MWI support configuration options had to be reworked because chan_dahdi was parsing the box@context format to get the box number. As a result the mwi_vm_boxes chan_dahdi.conf option was added and is documented in the chan_dahdi.conf.sample file. Review: https://reviewboard.asterisk.org/r/3072/ ........ Merged revisions 404348 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404350 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	7e9febbf86	app_cdr,app_forkcdr,func_cdr: Synchronize with engine when manipulating state ... When doing the rework of the CDR engine that pushed all of the logic into cdr.c and made it respond to changes in channel state over Stasis, we knew that accessing the CDR engine from the dialplan would be "slightly" non-deterministic. Dialplan threads would be accessing CDRs while Stasis threads would be updating the state of said CDRs - whereas in the past, everything happened on the dialplan threads. Tests have shown that "slightly" is in reality "very". This patch synchronizes things by making the dialplan applications/functions that manipulate CDRs do so over Stasis. ForkCDR, NoCDR, ResetCDR, CDR, and CDR_PROP now all use Stasis to send their requests over to the CDR engine, and synchronize on the channel Stasis topic via a subscription so that they return their values/control to the dialplan at the appropriate time. While going through this, the following changes were also made: * DISA, which can reset the CDR when a user successfully authenticates, now just uses the ResetCDR app to do this. This prevents having to duplicate the same Stasis synchronization logic in that application. * Answer no longer disables CDRs. It actually didn't work anyway - calling DISABLE on the channel's CDR doesn't stop the CDR from getting the Answer time - it just kills all CDRs on that channel, which isn't what the caller would intend. (closes issue ASTERISK-22884) (closes issue ASTERISK-22886) Review: https://reviewboard.asterisk.org/r/3057/ ........ Merged revisions 404294 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404295 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	f6e92c35df	app_page: Add predial handlers for app_page. ... (closes issue AFS-14) Review: https://reviewboard.asterisk.org/r/3045/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403576 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Mark Michelson	d421818c3d	Add a CONFBRIDGE_RESULT channel variable to discern why a channel left a ConfBridge. ... Review: https://reviewboard.asterisk.org/r/3009 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403526 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Mark Michelson	5730410861	Create function for retrieving Mixmonitor instance data. ... For the time, this is only useful for retrieving the filename. The purpose of this function is to better facilitate multiple mixmonitors per channel. Setting a MIXMONITOR_FILENAME channel variable is not conducive to such behavior, so allowing finer grained access to individual mixmonitor properties improves the situation. The MIXMONITOR_FILENAME channel variable is still set, though, so there is no worry about backwards compatibility. Review: https://reviewboard.asterisk.org/r/3023 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403512 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	18c2cfa7b7	PickupChan: Add ability to specify channel uniqueids as well as channel names. ... * Made PickupChan() search by channel uniqueids if the search could not find a channel by name. * Ensured PickupChan() never considers the picking channel for pickup. * Made PickupChan() option p use a common search by name routine. The original search was erroneously case sensitive. (issue AFS-42) Review: https://reviewboard.asterisk.org/r/3017/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403013 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	a60764d61e	app_directory: Set variable indicating reason directory exited ... By the time the directory application exits, a channel variable DIRECTORY_RESULT will be set for the channel that invoked it which can be used to determine the reason for exit. The changes log and the app_directory documentation contain specific details about each of the possible values for DIRECTORY_RESULT. Review: https://reviewboard.asterisk.org/r/3016/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402995 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	7950118e18	Confbridge: Add option to review the recording similar to announce_join_leave ... Review: https://reviewboard.asterisk.org/r/3008/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402854 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	ad0e70ba83	Say: If SAY_DTMF_INTERRUPT is set to an ast_true value, jump on DTMF ... Similar to how background works, if a say application is called with this variable set to 'true', 'yes', 'on', etc. then using DTMF while the say action is in progress will result in the channel jumping to that extension in the dialplan. Review: https://reviewboard.asterisk.org/r/3011/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402819 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	bf5492abd2	security_events: Push out security events over AMI events ... Security Events will now be written to any listener of the new 'security' class Review: https://reviewboard.asterisk.org/r/2998/ ........ Merged revisions 402584 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402585 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	4b7ff87492	app_confbridge: Make the CONFBRIDGE function be able to create dynamic menus ... Also adds the ability to clear all profile items and makes behavior more consistent with documentation as when choosing whether to use CONFBRIDGE datastore profiles or the application arguments to the confbridge application. (closes issue ASTERISK-22760) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/2971/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402397 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	f87086b374	app_confbridge: Can now set the language used for announcements to the conference. ... ConfBridge now has the ability to set the language of announcements to the conference. The language can be set on a bridge profile in confbridge.conf or by the dialplan function CONFBRIDGE(bridge,language)=en. (closes issue ASTERISK-19983) Reported by: Jonathan White Patches: M19983_rev2.diff (license #5138) patch uploaded by junky (modified) Tested by: rmudgett ........ Merged revisions 400741 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 400742 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400744 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Michael L. Young	2af53640c8	Add IPv6 Support To chan_iax2 ... This patch adds IPv6 support to chan_iax2. Yay! (closes issue ASTERISK-22025) Patches: iax2-ipv6-v5-reviewboard.diff by Michael L. Young (license 5026) Review: https://reviewboard.asterisk.org/r/2660/ ........ Merged revisions 400567 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400568 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kinsey Moore	b44ce141e5	chan_sip: Allow Asterisk to retry after 403 on register ... This adds a global option in chan_sip to allow it to continue attempting registration if a 403 is received, clearing the cached nonce and treating it as a non-fatal response. Normally, this would cause registration attempts to that endpoint to stop. This also adds a similar per-outbound-registration option to chan_pjsip which allows the retry interval to be altered for 403 responses to REGISTER requests. (closes issue ASTERISK-17138) Review: https://reviewboard.asterisk.org/r/2874/ Reported by: Rudi ........ Merged revisions 400137 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 400140 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 400141 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400142 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
David M. Lee	9bed50db41	optional_api: Fix linking problems between modules that export global symbols ... With the new work in Asterisk 12, there are some uses of the optional_api that are prone to failure. The details are rather involved, and captured on [the wiki][1]. This patch addresses the issue by removing almost all of the magic from the optional API implementation. Instead of relying on weak symbol resolution, a new optional_api.c module was added to Asterisk core. For modules providing an optional API, the pointer to the implementation function is registered with the core. For modules that use an optional API, a pointer to a stub function, along with a optional_ref function pointer are registered with the core. The optional_ref function pointers is set to the implementation function when it's provided, or the stub function when it's now. Since the implementation no longer relies on magic, it is now supported on all platforms. In the spirit of choice, an OPTIONAL_API flag was added, so we can disable the optional_api if needed (maybe it's buggy on some bizarre platform I haven't tested on) The AST_OPTIONAL_API*() macros themselves remained unchanged, so existing code could remain unchanged. But to help with debugging the optional_api, the patch limits the #include of optional API's to just the modules using the API. This also reduces resource waste maintaining optional_ref pointers that aren't used. Other changes made as a part of this patch: * The stubs for http_websocket that wrap system calls set errno to ENOSYS. * res_http_websocket now properly increments module use count. * In loader.c, the while() wrappers around dlclose() were removed. The while(!dlclose()) is actually an anti-pattern, which can lead to infinite loops if the module you're attempting to unload exports a symbol that was directly linked to. * The special handling of nonoptreq on systems without weak symbol support was removed, since we no longer rely on weak symbols for optional_api. [1]: https://wiki.asterisk.org/wiki/x/wACUAQ (closes issue ASTERISK-22296) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/2797/ ........ Merged revisions 397989 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397990 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	449afdd9e8	Revert r394939 due to (numerous) objections ... The patch from ASTERISK-21965 was committed perhaps a bit too hastily. Walter and Tzafrir have pointed out numerous issues with the approach and have propsed an alternative in r/2757. Since it's not a time critical issue and is not worth holding up the release of 12 for it, I've gone ahead and reverted r394939 from 12/trunk and re-opened ASTERISK-21965. ........ Merged revisions 397938 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397939 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	629f43d2b6	Add database schema management using Alembic ... This patch replaces contrib/realtime/ with a new setup for managing the database schema required for database integration with Asterisk. In addition to initializing a database with the proper schema, alembic can do a database migration to assist with upgrading Asterisk in the future. Hopefully this helps make setting up and operating Asterisk with a database easier. With this the schema only needs to be maintained in one place instead of once per database. The schemas I have added here have a bit of improvement over the examples that were there before (some added consistency and added some missing indexes). Managing the schema in one place here also applies to all databases supported by SQLAlchemy. See contrib/ast-db-manage/README.md for more details. Review: https://reviewboard.asterisk.org/r/2731 patch by Russell Bryant (license 6300) ........ Merged revisions 397874 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397875 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	b7ec25ec2e	Update CHANGES file for Asterisk 12 ... This updates the Asterisk 12 CHANGES file with the things that were missed during the development cycle. Review: https://reviewboard.asterisk.org/r/2795/ ........ Merged revisions 397870 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397872 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	9f4849724f	Update CHANGES file to reflect pass through support for Opus/VP8 ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397527 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kinsey Moore	7b032c1adb	Add SayAlphaCase and similar functionality for AGI ... This adds a new dialplan application, SayAlphaCase, that performs much the same function as SayAlpha except that it takes additional options which allow the user to specify whether the case of each letter should be announced for uppercase, lowercase, or all letters. Similar functionality has been added to the SAY ALPHA AGI command via an optional parameter. Original Patch by: Kevin Scott Adams Reported by: Kevin Scott Adams Review: https://reviewboard.asterisk.org/r/2725/ (closes issue ASTERISK-20782) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397493 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Mark Michelson	00baddb906	Massively clean up app_queue. ... This essentially makes app_queue usable again. From reviewboard: * Reporting of transfers and call completion is done by creating stasis subscriptions and listening for specific events in order to determine when the call is finished (either via a transfer or hangup). * Dial end messages have been added where they were previously missing. * Queue stats are properly being updated again once calls have finished. * AgentComplete stasis messages and AMI events are now occurring again. * Mixmonitor starting has been factored into its own function and uses the Mixmonitor API now instead of using ast_pbx_run() In addition to the changes in app_queue, there are several supplementary changes as well: * Queue logging now differentiates between attended and blind transfers. A note about this is in the CHANGES file. * Local channel optimization events now report more information. This includes which of the two local channels involved is the destination of the optimization, the channel that is replacing the destination local channel, and an identifier so that begin and end events can be matched to each other. The end events are now sent whether the optimization was successful or not and includes an indicator of whether the optimization was successful. * Changes were made to features and bridging_basic so that additional flags may be set on a bridge. This is necessary because the queue requires that its bridge only allows move-swap local channel optimizations into the bridge. (closes issue ASTERISK-21517) Reported by Matt Jordan (closes issue ASTERISK-21943) Reported by Matt Jordan Review: https://reviewboard.asterisk.org/r/2694 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397451 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	e85dd76945	Allow the SIP_CODEC family of variables to specify more than one codec ... The SIP_CODEC family of variables let you set the preferred codec to be offered on an outbound INVITE request. However, for video calls, you need to be able to set both the audio and video codecs to be offered. This patch lets the SIP_CODEC variables accept a comma delineated list of codecs. The first codec in the list is set as the preferred codec; additional codecs are still offered however. This lets a dialplan writer set both audio and video codecs, e.g., Set(SIP_CODEC=ulaw,h264) Note that this feature was written by both Dennis Guse and Frank Haase Review: https://reviewboard.asterisk.org/r/2728 (closes issue ASTERISK-21976) Reported by: Denis Guse Tested by: mjordan, sysreq patches: patch-channels-chan__sip.c-393919 uploaded by dennis.guse (license 6513) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397243 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	38236e54a8	Remove dead code from features.c; refactor pickup code into pickup.c ... This patch does the following: * It moves the pickup code out of features.c and into pickup.c * It removes the vast majority of dead code out of features.c. In particular, this includes the parking code. (issue ASTERISK-22134) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396060 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	c8a91b5b01	Add queue member paused hints ... This patch adds the ability in Queue to raise a hint when a member's paused state changes. The hint uses the form 'Queue:{queue_name}_pause_{member_name}', where {queue_name} and {member_name} are the name of the queue and the name of the member to subscribe to, respectively. For example: exten => 8501,hint,Queue:sales_pause_mark. Members will show as In Use when paused. Note that the format of the queue pause hint was changed slightly from what is on the issue to accomodate suggestion on the code review. Review: https://reviewboard.asterisk.org/r/2254 (closes issue ASTERISK-20842) Reported by: Philippe Lindheimer patches: qpause-10-378206.diff uploaded by Philippe Lindheimer (license 5519) qpause-11-378206.diff uploaded by Philippe Lindheimer (license 5519) qpause-trunk-378206.diff uploaded by Philippe Lindheimer (license 5519) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396010 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kinsey Moore	03090a88ba	Fix documentation replication issues ... This prevents XML documentation duplication by expanding channel and bridge snapshot tags into channel and bridge snapshot parameter sets with a given prefix or defaulting to no prefix. This also prevents documentation from becoming fractured and out of date by keeping all variations of the documentation in template form such that it only needs to be updated once and keeps maintenance to a minimum. Review: https://reviewboard.asterisk.org/r/2708/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395985 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	9ea74182ef	Update CONTROL STREAM FILE to accept an 'offsetms' parameter ... This patch allows starting playback of audio through the CONTROL STREAM FILE AGI command to start at a particular offset. It will also return the final position of the file in the 'endpos' attribute. (closes issue ASTERISK-17803) Reported by: Murray Melvin patches: res_agi.c.r316293.diff uploaded by murraytm (license 6221) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395906 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	54803338b4	Always install safe_asterisk; add configuration file support ... This patch modifies the behavior of safe_asterisk in two ways: (1) It modifies the Asterisk Makefile such that safe_asterisk is always installed on a 'make install'. This was done as bugfixes in the safe_asterisk script were not applied in previous version of Asterisk without first removing the old version of the script. (2) In order to keep a newly installed version of safe_asterisk from impacting local modifications, a new config file - safe_asterisk.conf.sample - has been provided. Settings that were previously modified in safe_asterisk can be set there instead. (closes issue ASTERISK-21965) Reported by: Jeremy Kister patches: safe_asterisk.patch uploaded by jkister (License 6232) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394939 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	3a5b68f07c	Allow setting allowmultiplelogin on an account basis ... This patch modifies manager to allow the allowmultiplelogin setting to be set on an account by account basis. When set in the general context, it will act as the default for the defined accounts. Setting it in the account will override the general setting. (closes issue ASTERISK-21324) Reported by: vldmr patches: asterisk-manager-per-user-allowmultiplelogin.patch uploaded by vldmr (License 6487) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394881 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kinsey Moore	c3b8939be8	Add CEL local optimization record type ... This adds a new CEL event type, AST_CEL_LOCAL_OPTIMIZE, to represent local channel optimizations. Local channel optimizations were one of several things conveyed by the now defunct BRIDGE_UPDATE event type. This also adds a unit test to test generation of this new CEL event. Review: https://reviewboard.asterisk.org/r/2676/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394870 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kinsey Moore	684c83b29b	Add transfer support to CEL ... This adds CEL support for blind and attended transfers and call pickup. During the course of adding this functionality I noticed that CONF_ENTER, CONF_EXIT, and BRIDGE_TO_CONF events are particularly useless without a bridge identifier, so I added that as well. This adds tests for blind transfers, several types of attended transfers, and call pickup. The extra field in CEL records now consists of a JSON blob whose fields are defined on a per-event basis. Review: https://reviewboard.asterisk.org/r/2658/ (closes issue ASTERISK-21565) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394858 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	19d8f8c8e4	Add 'kick all' capability to ConfBridge CLI command ... This patch adds the ability to kick all users out of a conference from the ConfBridge kick CLI command. It is invoked by passing 'all' as the channel parameter to the CLI command, i.e., "confbridge kick <conf> all". Note that this patch was modified slightly to conform to trunk. (closes issue ASTERISK-21827) Reported by: dorianlogan patches: kickall-patch_v2.diff uploaded by dorianlogan (License 6504) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394531 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	d43b17a872	Replace chan_agent with app_agent_pool. ... The ill conceived chan_agent is no more. It is now replaced by app_agent_pool. Agents login using the AgentLogin() application as before. The AgentLogin() application no longer does any authentication. Authentication is now the responsibility of the dialplan. (Besides, the authentication done by chan_agent did not match what the voice prompts asked for.) Sample extensions.conf [login] ; Sample agent 1001 login ; Set COLP for in between calls so the agent does not see the last caller COLP. exten => 1001,1,Set(CONNECTEDLINE(all)="Agent Waiting" <1001>) ; Give the agent DTMF transfer and disconnect features when connected to a caller. same => n,Set(CHANNEL(dtmf-features)=TX) same => n,AgentLogin(1001) same => n,NoOp(AGENT_STATUS is ${AGENT_STATUS}) same => n,Hangup() [caller] ; Sample caller direct connect to agent 1001 exten => 800,1,AgentRequest(1001) same => n,NoOp(AGENT_STATUS is ${AGENT_STATUS}) same => n,Hangup() ; Sample caller going through a Queue to agent 1001 exten => 900,1,Queue(agent_q) same => n,Hangup() Sample queues.conf [agent_q] member => Local/800@caller,,SuperAgent,Agent:1001 Under the hood operation overview: 1) Logged in agents wait for callers in an agents holding bridge. 2) Caller requests an agent using AgentRequest() 3) A basic bridge is created, the agent is notified, and caller joins the basic bridge to wait for the agent. 4) The agent is either automatically connected to the caller or must ack the call to connect. 5) The agent is moved from the agents holding bridge to the basic bridge. 6) The agent and caller talk. 7) The connection is ended by either party. 8) The agent goes back to the agents holding bridge. To avoid some locking issues with the agent holding bridge, I needed to make some changes to the after bridge callback support. The after bridge callback is now a list of requested callbacks with the last to be added the only active callback. The after bridge callback for failed callbacks will always happen in the channel thread when the channel leaves the bridging system or is destroyed. (closes issue ASTERISK-21554) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/2657/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394417 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	30d379851e	Create Local channel messages on the Stasis message bus and produce AMI events ... This patch does the following: * It adds a virtual table of callbacks to core_unreal. These callbacks can be supplied by concrete implementations of "unreal" channel drivers, which lets the unreal channel driver call specific functionality when it performs some action. Currently, this is done to notify implementations when an optimization operation has begun, and when an optimization operation has succeeded. * It adds Stasis-Core messages for Local channel bridging and Local channel optimization. Local channel optimization is now two events: a Begin and an End. Some consumers of Stasis-Core may want to know when an operation is beginning so that they can 'prepare' their information; others will be more concerned about when the operation has completed, so that they can 'fix up' information. Stasis-Core allows for both, as does AMI. Review: https://reviewboard.asterisk.org/r/2552 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393801 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	b193c2873d	Handle hangup logic in the Stasis message bus and consumers of Stasis messages ... This patch does the following: * It adds a new soft hangup flag AST_SOFTHANGUP_HANGUP_EXEC that is set when a channel is executing dialplan hangup logic, i.e., the 'h' extension or a hangup handler. Stasis messages now also convey the soft hangup flag so consumers of the messages can know when a channel is executing said hangup logic. * It adds a new channel flag, AST_FLAG_DEAD, which is set when a channel is well and truly dead. Not just a zombie, but dead, Jim. Manager, CEL, CDRs, and other consumers of Stasis have been updated to look for this flag to know when the channel should by lying six feet under. * The CDR engine has been updated to better handle a channel entering and leaving a bridge. Previously, a new CDR was automatically created when a channel left a bridge and put into the 'Pending' state; however, this way of handling CDRs made it difficult for the 'endbeforehexten' logic to work correctly - there was always a new CDR waiting in the hangup logic and, even if 'ended', wouldn't be the CDR people wanted to inspect in the hangup routine. This patch completely removes the Pending state and instead defers creation of the new CDR until it gets a new message that requires a new CDR. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393777 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago