22 Commits (1ddfb7551a42fce6165726b0d5834668c3fdbcf6)

Author	SHA1	Message	Date
Mike Bradeen	24e27a3c6e	res_pjsip: Upgraded bundled pjsip to 2.13 ... Removed multiple patches. Code chages in res_pjsip_pubsub due to changes in evsub. Pjsip now calls on_evsub_state() before on_rx_refresh(), so the sub tree deletion that used to take place in on_evsub_state() now must take place in on_rx_refresh(). Additionally, pjsip now requires that you send the NOTIFY from within on_rx_refresh(), otherwise it will assert when going to send the 200 OK. The idea is that it will look for this NOTIFY and cache it until after sending the response in order to deal with the self-imposed message mis-order. Asterisk previously dealt with this by pushing the NOTIFY in on_rx_refresh(), but pjsip now forces us to use it's method. Changes were required to configure in order to detect which way pjsip handles this as the two are not compatible for the reasons mentioned above. A corresponding change in testsuite is required in order to deal with the small interal timing changes caused by moving the NOTIFY send. ASTERISK-30325 Change-Id: I50b00cac89d950d3511d7b250a1c641965d9fe7f	2 years ago
Joshua C. Colp	f97e9aed85	pjsip: Add TLS transport reload support for certificate and key. ... This change adds support using the pjsip_tls_transport_restart function for reloading the TLS certificate and key, if the filenames remain unchanged. This is useful for Let's Encrypt and other situations. Note that no restart of the transport will occur if the certificate and key remain unchanged. ASTERISK-30186 Change-Id: I9bc95a6bf791830a9491ad9fa43c17d4010028d0	3 years ago
Sean Bright	db824d8f6d	ast_pkgconfig.m4: AST_PKG_CONFIG_CHECK() relies on sed. ... Make sure that we have a working sed before trying to use it. ASTERISK-30059 #close Change-Id: I9abad67a5df11b665d480feec304ab9d6f55cc76	3 years ago
Hugh McMaster	b678624f04	configure.ac: Use pkg-config to detect libxml2 ... Use pkg-config to detect libxml2, falling back to xml2-config if the former is not available. This patch ensures Asterisk continues to build on systems without xml2-config installed. The patch also updates the associated 'configure' files. ASTERISK-29970 #close Change-Id: I3c90dfe0b0590486cbb8e6d426a7c5c4199410c0	3 years ago
George Joseph	c07e3c2f4d	BuildSystem: Check for alternate openssl packages ... OpenSSL is one of those packages that often have alternatives with later versions. For instance, CentOS/EL 7 has an openssl package at version 1.0.2 but there's an openssl11 package from the epel repository that has 1.1.1. This gets installed to /usr/include/openssl11 and /usr/lib64/openssl11. Unfortunately, the existing --with-ssl and --with-crypto ./configure options expect to point to a source tree and don't work in this situation. Also unfortunately, the checks in ./configure don't use pkg-config. In order to make this work with the existing situation, you'd have to run... ./configure --with-ssl=/usr/lib64/openssl11 \ --with-crypto=/usr/lib64/openssl11 \ CFLAGS=-I/usr/include/openssl11 BUT... those options don't get passed down to bundled pjproject so when you run make, you have to include the CFLAGS again which is a big pain. Oh... To make matters worse, although you can specify PJPROJECT_CONFIGURE_OPTS on the ./configure command line, they don't get saved so if you do a make clean, which will force a re-configure of bundled pjproject, those options don't get used. So... * In configure.ac... Since pkg-config is installed by install_prereq anyway, we now use it to check for the system openssl >= 1.1.0. If that works, great. If not, we check for the openssl11 package. If that works, great. If not, we fall back to just checking for any openssl. If pkg-config isn't installed for some reason, or --with-ssl=<dir> or --with-crypto=<dir> were specified on the ./configure command line, we fall back to the existing logic that uses AST_EXT_LIB_CHECK(). * The whole OpenSSL check process has been moved up before THIRD_PARTY_CONFIGURE(), which does the initial pjproject bundled configure, is run. This way the results of the above checks, which may result in new include or library directories, is included. * Although not strictly needed for openssl, We now save the value of PJPROJECT_CONFIGURE_OPTS in the makeopts file so it can be used again if a re-configure is triggered. ASTERISK-29693 Change-Id: I341ab7603e6b156aa15a66f43675ac5029d5fbde	4 years ago
Alexander Traud	966acc6251	pjproject_bundled: Honor --without-pjproject. ... ASTERISK-28837 Change-Id: Id057324912a3cfe6f50af372675626bb515907d9	5 years ago
Sebastian Kemper	b7fbb9c41f	check_expr2: fix cross-compile/hardening issues ... When building check_expr2 with ASLR PIE hardening enabled the linker fails. This is resolved by adding the regular compiler flags when building the object files from ast_expr2f.c and ast_expr2.c. Note: The STANDALONE define is removed because it is already defined in _ASTCFLAGS. YY_NO_INPUT is defined so that the compile survives '--enable-dev-mode'. Also, a Makefile variable "CROSS_COMPILING" is added so that the build system doesn't try to run check_expr2 when cross-compiling, because that will fail the build as will. ASTERISK-28685 #close Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net> Change-Id: If435b7db9f9ad8266245bda51c81c220f9658915	5 years ago
Sean Bright	e40f248fac	menuselect: Fix curses build on Gentoo Linux ... Because keypad() is exported by libtinfo, it needs to be explicitly added to the linker options. ASTERISK-28487 #close Change-Id: I6c2ad5b95f422c263d078b5c0e84c111807dffc6	6 years ago
Joshua Colp	a8e5cf557d	res_rtp_asterisk: Add support for DTLS packet fragmentation. ... This change adds support for larger TLS certificates by allowing OpenSSL to fragment the DTLS packets according to the configured MTU. By default this is set to 1200. This is accomplished by implementing our own BIO method that supports MTU querying. The configured MTU is returned to OpenSSL which fragments the packet accordingly. When a packet is to be sent it is done directly out the RTP instance. ASTERISK-28018 Change-Id: If2d5032019a28ffd48f43e9e93ed71dbdbf39c06	6 years ago
Kevin Harwell	31fba4e869	rtp_engine: rtcp_report_to_json can overflow the ssrc integer value ... When writing an RTCP report to json the code attempts to pack the "ssrc" and "source_ssrc" unsigned integer values as a signed int value type. This of course means if the ssrc's unsigned value is greater than that which can fit into a signed integer value it gets converted to a negative number. Subsequently, the negative value goes out in the json report. This patch now packs the value as a json_int_t, which is the widest integer type available on a given system. This should make it so the value no longer overflows. Note, this was caught by two failing tests hep/rtcp-receiver/ and hep/rtcp-sender. Change-Id: I2af275286ee5e795b79f0c3d450d9e4b28e958b0	7 years ago
Sean Bright	3d9deb35f0	autoconf: Check for srtp_get_version_string() before using it ... Change-Id: Id2a916ff9448706090e72ff2c7fb3f5ba24a05df	7 years ago
Alexander Traud	7418dfa2c7	BuildSystem: Enable ncurses for menuselect in Solaris 11. ... The check for the library ncurses should use not use the header <curses.h> but <ncurses.h>, because on some platforms <curses.h> is not a drop-in replacement for <ncurses.h>: For example in Solaris, the symbol initscr is a typedef in <curses.h> to a symbol which does not exist in the library ncurses (initscr32). Simply use <ncurses.h> when you link to ncurses. Furthermore in Solaris, the header <ncurses.h> is in a subdirectory /usr/include/ncurses and not available via pkg-config. ASTERISK-15331 ASTERISK-14935 ASTERISK-12382 ASTERISK-9107 Change-Id: Ife367776b0ccf17d3fefed868245376bfb93745d	7 years ago
Alexander Traud	d54637373a	menuselect: Add DragonFly BSD. ... In DragonFly BSD, added libraries from ports are placed into /usr/local. Therefore, this directory must be added for the preprocessor, compiler, and linker. Beside that, the script ./configure was updated: * OSARCH list was outdated and not used, removed. * AC_CANONICAL_BUILD was not used. * _REENTRANT, this feature test macro is obsolete. ASTERISK-27820 Change-Id: I186d88d99cfa4de6569888e12ac97bd2f441c422	7 years ago
Corey Farrell	e40fd7a232	Build System: Strip '-std=c99' from CFLAGS provided by libraries. ... Asterisk requires GNU C extensions. On some systems certain libraries may incorrectly push -std=c99 into CFLAGS, thus breaking the build. This change causes that flag to be stripped so the Asterisk build is not broken by those libraries. This change is made for both pkgconfig and tool based libraries. ASTERISK-27629 #close Change-Id: I13389613b194abbac77becf90cd950dc168704db	7 years ago
Corey Farrell	ce5cfc8ffb	autoconf: Use m4 conditionals where possible. ... Change-Id: I530c0a72f965437acef6a9a4fbfe5c487f078b65	8 years ago
Corey Farrell	b9f4bb5988	menuselect: Remove ineffective weak attribute detection. ... menuselect detects compiler support for multiple styles of weak functions. This is a remnant from 2013 when OPTIONAL_API required weak functions. It is no longer correct for menuselect to switch dependencies from optional to required based on lack of weak function support. Note an issue remains - dependencies should switch from optional to required based on OPTIONAL_API being enabled or disabled. I don't think this is possible. menuselect needs to know at startup if OPTIONAL_API is enabled or disabled, so the only way to fix this is to remove OPTIONAL_API from menuselect and create a configure option. I've left the code that switches in place but it's preprocessed out. Additionally removed: - WEAKREF variable from Asterisk makeopts.in. - Related disabled code from test_utils. - Pointless AC_REVISION call from menuselect/configure.ac. Change-Id: Ifa702e5f98eb45f338b2f131a93354632a8fb389	8 years ago
Tzafrir Cohen	18a6f250e2	menuselect: invalid test for GTK2 ... configuire.ac was only checking for the existence of pkg-config and not the gtk2 package itself. Now it calls AST_PKG_CONFIG_CHECK for gtk+-2.0. ASTERISK-26356 #close Change-Id: I93e9d0166341f0e7f84b52955bb6f81da42f2ef6	9 years ago
ibercom	f897f36721	weakref attribute detection broken with gcc 4.6 and higher ... GCC 4.7 Manual: http://gcc.gnu.org/onlinedocs/gcc-4.7.4/gcc/Function-Attributes.html weakref ("target") A weak reference is an alias that does not by itself require a definition to be given for the target symbol. ASTERISK-22559 #close Reported by: Ibercom Change-Id: I36a136cae947b65187a697533416f9ff9a0b8cdf	10 years ago
Sean Bright	84b9f5eff5	Import Asterisk's autoconf magic instead of using our own. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418893 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	3f64ca0c04	configure: Fix libxml2 development library dependency checking ... The commit that added libxml2 support didn't fully check for the libxml2 development script in the Asterisk configure file. As a result, Asterisk could be configured, then fail on menuselect. This patch fixes it so that Asterisk should detect the libxml2 dependency failure first. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418850 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	26c7e684ea	menuselect: Add libxml2 support (Patch 3) ... This is the final patch in adding menuselect to Asterisk. - The first patch (r418832) added menuselect along with mxml - The second patch (r418833) removed mxml from menuselect This patch adds support for libxml2 to menuselect, and makes libxml2 a required library for Asterisk. Note that the libxml2 portion of this patch was written by Sean Bright, and was made available on a team branch: http://svn.digium.com/svn/menuselect/team/seanbright/libxml2/ Review: https://reviewboard.asterisk.org/r/3773/ ASTERISK-20703 #close patches: some_mysterious_team_branch uploaded by seanbright (License 5060) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418834 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	c7d3570248	menuselect: Add menuselect to Asterisk trunk (Patch 1) ... This is the first patch that adds menuselect to Asterisk trunk, and removes the svn:externals property. This is being done for two reasons: (1) The removal of external repositories eases a future migration to git (2) Asterisk is now the only thing that uses menuselect; as a result, there's little need to keep it in an external repository Subsequent patches will remove the mxml dependency from menuselect and tidy up the build system. ASTERISK-20703 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418832 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago