asterisk

Commit Graph

Author	SHA1	Message	Date
Sean Bright	544e8b7950	cli.c: Allow 'channel request hangup' to accept patterns. This extends 'channel request hangup' to accept multiple channel names, a POSIX Extended Regular Expression, a glob-like pattern, or a combination of all of them. UserNote: The 'channel request hangup' CLI command now accepts multiple channel names, POSIX Extended Regular Expressions, glob-like patterns, or a combination of all of them. See the CLI command 'core show help channel request hangup' for full details.	2 months ago
Nathaniel Wesley Filardo	ddee4048a9	configure.ac: use AC_PATH_TOOL for nm `nm` might, especially in cross-compilation scenarios, be available but prefixed with the target triple. So: use `AC_PATH_TOOL` rather than `AC_PATH_PROG` to find it. (See https://www.gnu.org/software/autoconf/manual/autoconf-2.68/html_node/Generic-Programs.html .) Found and proposed fix tested by cross-compiling Asterisk using Nixpkgs on x86_64 targeting aarch64. :)	2 months ago
Justin T. Gibbs	0e8a22caf0	rtp/rtcp: Configure dual-stack behavior via IPV6_V6ONLY Dual-stack behavior (simultaneous listening for IPV4 and IPV6 connections on a single socket) is required by Asterisk's ICE implementation. On systems with the IPV6_V6ONLY sockopt, set the option to 0 (dual-stack enabled) when binding to the IPV6 any address. This ensures correct behavior regardless of the system's default dual-stack configuration.	2 months ago
Albrecht Oster	5f9cd260ac	res_pjproject: Fix DTLS client check failing on some platforms Certain platforms (mainly BSD derivatives) have an additional length field in `sockaddr_in6` and `sockaddr_in`. `ast_sockaddr_from_pj_sockaddr()` does not take this field into account when copying over values from the `pj_sockaddr` into the `ast_sockaddr`. The resulting `ast_sockaddr` will have an uninitialized value for `sin6_len`/`sin_len` while the other `ast_sockaddr` (not converted from a `pj_sockaddr`) to check against in `ast_sockaddr_pj_sockaddr_cmp()` has the correct length value set. This has the effect that `ast_sockaddr_cmp()` will always indicate an address mismatch, because it does a bitwise comparison, and all DTLS packets are dropped even if addresses and ports match. `ast_sockaddr_from_pj_sockaddr()` now checks whether the length fields are available on the current platform and sets the values accordingly. Resolves: #505	11 months ago
George Joseph	a0987672f0	Add SHA-256 and SHA-512-256 as authentication digest algorithms * Refactored pjproject code to support the new algorithms and added a patch file to third-party/pjproject/patches * Added new parameters to the pjsip auth object: * password_digest = <algorithm>:<digest> * supported_algorithms_uac = List of algorithms to support when acting as a UAC. * supported_algorithms_uas = List of algorithms to support when acting as a UAS. See the auth object in pjsip.conf.sample for detailed info. * Updated both res_pjsip_authenticator_digest.c (for UAS) and res_pjsip_outbound_authentocator_digest.c (UAC) to suport the new algorithms. The new algorithms are only available with the bundled version of pjproject, or an external version > 2.14.1. OpenSSL version 1.1.1 or greater is required to support SHA-512-256. Resolves: #948 UserNote: The SHA-256 and SHA-512-256 algorithms are now available for authentication as both a UAS and a UAC.	1 year ago
George Joseph	c193752ca4	Add C++ Standard detection to configure and fix a new C++20 compile issue * The autoconf-archive package contains macros useful for detecting C++ standard and testing other C++ capabilities but that package was never included in the install_prereq script so many existing build environments won't have it. Even if it is installed, older versions won't newer C++ standards and will actually cause an error if you try to test for that version. To make it available for those environments, the ax_cxx_compile_stdcxx.m4 macro has copied from the latest release of autoconf-archive into the autoconf directory. * A convenience wrapper(ast_cxx_check_std) around ax_cxx_compile_stdcxx was also added so checking the standard version and setting the asterisk-specific PBX_ variables becomes a one-liner: `AST_CXX_CHECK_STD([std], [force_latest_std])`. Calling that with a version of `17` for instance, will set PBX_CXX17 to 0 or 1 depending on whether the current c++ compiler supports stdc++17. HAVE_CXX17 will also be 'defined" or not depending on the result. * C++ compilers hardly ever default to the latest standard they support. g++ version 14 for instance supports up to C++23 but only uses C++17 by default. If you want to use C++23, you have to add `-std=gnu++=23` to the g++ command line. If you set the second argument of AST_CXX_CHECK_STD to "yes", the macro will automatically keep the highest `-std=gnu++` value that worked and pass that to the Makefiles. * The autoconf-archive package was added to install_prereq for future use. * Updated configure.ac to use AST_CXX_CHECK_STD() to check for C++ versions 11, 14, 17, 20 and 23. * Updated configure.ac to accept the `--enable-latest-cxx-std` option which will set the second option to AST_CXX_CHECK_STD() to "yes". The default is "no". * ast_copy_string() in strings.h declares the 'sz' variable as volatile and does an `sz--` on it later. C++20 no longer allows the `++` and `--` increment and decrement operators to be used on variables declared as volatile however so that was changed to `sz -= 1`.	1 year ago
Jaco Kroon	a79b8953bf	configure: Use . file rather than source file. source is a bash concept, so when /bin/sh points to another shell the existing construct won't work. Reference: https://bugs.gentoo.org/927055 Signed-off-by: Jaco Kroon <jaco@uls.co.za>	2 years ago
Naveen Albert	54b804fc3b	configure: Rerun bootstrap on modern platform. The last time configure was run, it was run on a system that did not enable -std=gnu11 by default, which meant that the restrict qualifier would not be recognized on certain platforms. This regenerates the configure files from running bootstrap.sh, so that these should be recognized on all supported platforms. Resolves: #586	2 years ago
Brad Smith	57ea2912e2	main/utils: Simplify the FreeBSD ast_get_tid() handling FreeBSD has had kernel threads for 20+ years.	2 years ago
George Joseph	d819a6bccb	codec_ilbc: Disable system ilbc if version >= 3.0.0 Fedora 37 started shipping ilbc 3.0.4 which we don't yet support. configure.ac now checks the system for "libilbc < 3" instead of just "libilbc". If true, the system version of ilbc will be used. If not, the version included at codecs/ilbc will be used. Resolves: #84	2 years ago
George Joseph	a9d4175e1d	Add libjwt to third-party The current STIR/SHAKEN implementation is not currently usable due to encryption issues. Rather than trying to futz with OpenSSL and the the current code, we can take advantage of the existing capabilities of libjwt but we first need to add it to the third-party infrastructure already in place for jansson and pjproject. A few tweaks were also made to the third-party infrastructure as a whole. The jansson "dest" install directory was renamed "dist" to better match convention, and the third-party Makefile was updated to clean all product directories not just the ones currently in use. Resolves: #349	2 years ago
Sean Bright	b5762cd54e	res_pjsip: Enable TLS v1.3 if present. Fixes #221 UserNote: res_pjsip now allows TLS v1.3 to be enabled if supported by the underlying PJSIP library. The bundled version of PJSIP supports TLS v1.3.	3 years ago
Sean Bright	d902e8e817	apply_patches: Use globbing instead of file/sort. This accomplishes the same thing as a `find ... \| sort` but with the added benefit of clarity and avoiding a call to a subshell. Additionally drop the -s option from call to patch as it is not POSIX.	3 years ago
George Joseph	640ead0071	apply_patches: Sort patch list before applying The apply_patches script wasn't sorting the list of patches in the "patches" directory before applying them. This left the list in an indeterminate order. In most cases, the list is actually sorted but rarely, they can be out of order and cause dependent patches to fail to apply. We now sort the list but the "sort" program wasn't in the configure scripts so we needed to add that and regenerate the scripts as well. Resolves: #193	3 years ago
Sean Bright	21d3c4ae58	configure: Remove obsolete and deprecated constructs. These were uncovered when trying to run `bootstrap.sh` with Autoconf 2.71: * AC_CONFIG_HEADER() is deprecated in favor of AC_CONFIG_HEADERS(). * AC_HEADER_TIME is obsolete. * $as_echo is deprecated in favor of AS_ECHO() which requires an update to ax_pthread.m4. Note that the generated artifacts in this commit are from Autoconf 2.69. Resolves #139	3 years ago
Miguel Angel Nubla	95d339ac7a	configure: Makefile downloader enable follow redirects. If curl is used for building, any download such as a sounds package will fail to follow HTTP redirects and will download wrong data. Resolves: #136	3 years ago
Jaco Kroon	f178bf78b7	configure: fix test code to match gethostbyname_r prototype. This enables the test to work with CC=clang. Without this the test for 6 args would fail with: utils.c:99:12: error: static declaration of 'gethostbyname_r' follows non-static declaration static int gethostbyname_r (const char name, struct hostent ret, char buf, ^ /usr/include/netdb.h:177:12: note: previous declaration is here extern int gethostbyname_r (const char __restrict __name, ^ Fixing the expected return type to int sorts this out. Signed-off-by: Jaco Kroon <jaco@uls.co.za>	3 years ago
Sean Bright	2d18fb6e9d	res_pjsip_pubsub.c: Use pjsip version for pending NOTIFY check. (#77 ) The functionality we are interested in is present only in pjsip 2.13 and newer. Resolves: #45	3 years ago
Sean Bright	5c6d5ea38f	core: Cleanup gerrit and JIRA references. (#57 ) * Remove .gitreview and switch to pulling the main asterisk branch version from configure.ac instead. * Replace references to JIRA with GitHub. * Other minor cleanup found along the way. Resolves: #39	3 years ago
Fabrice Fontaine	cb0220dec2	configure: fix detection of re-entrant resolver functions uClibc does not provide res_nsearch: asterisk-16.0.0/main/dns.c:506: undefined reference to `res_nsearch' Patch coded by Yann E. MORIN: http://lists.busybox.net/pipermail/buildroot/2018-October/232630.html ASTERISK-21795 #close Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de> [Retrieved from: https: //git.buildroot.net/buildroot/tree/package/asterisk/0005-configure-fix-detection-of-re-entrant-resolver-funct.patch] Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com> Change-Id: I79296f19e28ec764bbd1e991bf11c416d0b10563	3 years ago
Nick French	200dc7d0e8	pjproject_bundled: Fix cross-compilation with SSL libs. Asterisk makefiles auto-detect SSL library availability, then they assume that pjproject makefiles will also autodetect an SSL library at the same time, so they do not pass on the autodetection result to pjproject. This normally works, except the pjproject makefiles disables autodetection when cross-compiling. Fix by explicitly configuring pjproject to use SSL if we have been told to use it or it was autodetected ASTERISK-30424 #close Change-Id: I8fe2999ea46710e21d1d55a1bed92769c6ebded9	3 years ago
Mike Bradeen	58636a6ea6	res_pjsip: Upgraded bundled pjsip to 2.13 Removed multiple patches. Code chages in res_pjsip_pubsub due to changes in evsub. Pjsip now calls on_evsub_state() before on_rx_refresh(), so the sub tree deletion that used to take place in on_evsub_state() now must take place in on_rx_refresh(). Additionally, pjsip now requires that you send the NOTIFY from within on_rx_refresh(), otherwise it will assert when going to send the 200 OK. The idea is that it will look for this NOTIFY and cache it until after sending the response in order to deal with the self-imposed message mis-order. Asterisk previously dealt with this by pushing the NOTIFY in on_rx_refresh(), but pjsip now forces us to use it's method. Changes were required to configure in order to detect which way pjsip handles this as the two are not compatible for the reasons mentioned above. A corresponding change in testsuite is required in order to deal with the small interal timing changes caused by moving the NOTIFY send. ASTERISK-30325 Change-Id: I50b00cac89d950d3511d7b250a1c641965d9fe7f	3 years ago
Philip Prindeville	5809d879b0	test: Add test coverage for capture child process output ASTERISK-30037 #close Change-Id: I0273e85eeeb6b8e46703f24cd74d84f3daf0a69a	4 years ago
Joshua C. Colp	a0713a9f70	pjsip: Add TLS transport reload support for certificate and key. This change adds support using the pjsip_tls_transport_restart function for reloading the TLS certificate and key, if the filenames remain unchanged. This is useful for Let's Encrypt and other situations. Note that no restart of the transport will occur if the certificate and key remain unchanged. ASTERISK-30186 Change-Id: I9bc95a6bf791830a9491ad9fa43c17d4010028d0	4 years ago
Sean Bright	a6c7524e0d	ast_pkgconfig.m4: AST_PKG_CONFIG_CHECK() relies on sed. Make sure that we have a working sed before trying to use it. ASTERISK-30059 #close Change-Id: I9abad67a5df11b665d480feec304ab9d6f55cc76	4 years ago
Hugh McMaster	64f11e0d18	configure.ac: Use pkg-config to detect libxml2 Use pkg-config to detect libxml2, falling back to xml2-config if the former is not available. This patch ensures Asterisk continues to build on systems without xml2-config installed. The patch also updates the associated 'configure' files. ASTERISK-29970 #close Change-Id: I3c90dfe0b0590486cbb8e6d426a7c5c4199410c0	4 years ago
George Joseph	b40c4d59b1	xml.c, config,c: Add stylesheets and variable list string parsing Added functions to open, close, and apply XML Stylesheets to XML documents. Although the presence of libxslt was already being checked by configure, it was only happening if xmldoc was enabled. Now it's checked regardless. Added ability to parse a string consisting of comma separated name/value pairs into an ast_variable list. The reverse of ast_variable_list_join(). Change-Id: I1e1d149be22165a1fb8e88e2903a36bba1a6cf2e	4 years ago
Sean Bright	ce91a0fdbc	build: Rebuild configure and autoconfig.h.in autoconfigh.h.in was missed in the original review for this issue. Additionally it looks like I have newer pkg-config autoconf macros on my development machine. ASTERISK-29817 Change-Id: I3c85a4de82c5d7d6e0e23dad4c33bb650a86a57b	4 years ago
Michał Górny	6a879eea31	BuildSystem: Fix misdetection of gethostbyname_r() on NetBSD Fix the configure script not to detect the presence of gethostbyname_r() on NetBSD incorrectly. NetBSD includes it as an internal libc symbol that is not exposed in system headers and that is incompatible with other implementations. In order to avoid misdetecting it, perform the symbol check only if the declaration is found in the public header first. ASTERISK-29817 Change-Id: Iafa359b09908251bcd299ff54be003ea129b9eda	4 years ago
George Joseph	bc59b66de3	bundled_pjproject: Make it easier to hack There are times when you need to troubleshoot issues with bundled pjproject or add new features that need to be pushed upstream but... * The source directory created by extracting the pjproject tarball is not scanned for code changes so you have to keep forcing rebuilds. * The source directory isn't a git repo so you can't easily create patches, do git bisects, etc. * Accidentally doing a make distclean will ruin your day by wiping out the source directory, and your changes. * etc. This commit makes that easier. See third-party/pjproject/README-hacking.md for the details. ASTERISK-29824 Change-Id: Idb1251040affdab31d27cd272dda68676da9b268	4 years ago
Alexander Traud	5d8e0a6542	BuildSystem: Consistently allow 'ye' even for Jansson. Furthermore, consistently use not 'No' but ':' for non-existent file paths. Finally, use the same pattern for checking file paths: a) = ":" b) != "x:" Change-Id: I0c80c76d2cc98b0e5c859131290f4e3141a1a544	4 years ago
Alexander Traud	b8db1daec6	BuildSystem: In POSIX sh, == in place of = is undefined. ASTERISK-29724 Change-Id: I59aa0e52effdc16992f3a736ccf73430a6ef135b	4 years ago
Alexander Traud	d1163653d1	res_snmp: As build tool, prefer pkg-config over net-snmp-config. ASTERISK-29709 Change-Id: Ie169df878bdfc3a06b3097c5c38d185b480f54d4	4 years ago
George Joseph	0adcdbd118	BuildSystem: Check for alternate openssl packages OpenSSL is one of those packages that often have alternatives with later versions. For instance, CentOS/EL 7 has an openssl package at version 1.0.2 but there's an openssl11 package from the epel repository that has 1.1.1. This gets installed to /usr/include/openssl11 and /usr/lib64/openssl11. Unfortunately, the existing --with-ssl and --with-crypto ./configure options expect to point to a source tree and don't work in this situation. Also unfortunately, the checks in ./configure don't use pkg-config. In order to make this work with the existing situation, you'd have to run... ./configure --with-ssl=/usr/lib64/openssl11 \ --with-crypto=/usr/lib64/openssl11 \ CFLAGS=-I/usr/include/openssl11 BUT... those options don't get passed down to bundled pjproject so when you run make, you have to include the CFLAGS again which is a big pain. Oh... To make matters worse, although you can specify PJPROJECT_CONFIGURE_OPTS on the ./configure command line, they don't get saved so if you do a make clean, which will force a re-configure of bundled pjproject, those options don't get used. So... * In configure.ac... Since pkg-config is installed by install_prereq anyway, we now use it to check for the system openssl >= 1.1.0. If that works, great. If not, we check for the openssl11 package. If that works, great. If not, we fall back to just checking for any openssl. If pkg-config isn't installed for some reason, or --with-ssl=<dir> or --with-crypto=<dir> were specified on the ./configure command line, we fall back to the existing logic that uses AST_EXT_LIB_CHECK(). * The whole OpenSSL check process has been moved up before THIRD_PARTY_CONFIGURE(), which does the initial pjproject bundled configure, is run. This way the results of the above checks, which may result in new include or library directories, is included. * Although not strictly needed for openssl, We now save the value of PJPROJECT_CONFIGURE_OPTS in the makeopts file so it can be used again if a re-configure is triggered. ASTERISK-29693 Change-Id: I341ab7603e6b156aa15a66f43675ac5029d5fbde	4 years ago
Sean Bright	44fd75fae2	configure: Remove unused OpenSSL SRTP check. Discovered while looking at ASTERISK~29684. Usage was removed in change I3c77c7b00b2ffa2e935632097fa057b9fdf480c0. Change-Id: Iaf2f7a16ea5a7eee6375319347e4b40b8e7b10e3	4 years ago
Sean Bright	695fc3dbd7	dns.c: Load IPv6 DNS resolvers if configured. IPv6 nameserver addresses are stored in different part of the __res_state structure, so look there if we appear to have support for it. ASTERISK-28004 #close Change-Id: I67067077d8a406ee996664518d9c8fbf11f6977d	5 years ago
Joshua C. Colp	800fd84af6	res_config_sqlite: Remove deprecated module. ASTERISK-29598 Change-Id: I8ef17023f55bf01f2e309b06f4778a8ca7252c91	5 years ago
Joshua C. Colp	20b2741232	chan_vpb: Remove deprecated module. ASTERISK-29597 Change-Id: I19bb39eed0257ddfef453eb2df5646d073d50fe1	5 years ago
Joshua C. Colp	1eb2d85c99	chan_misdn: Remove deprecated module. ASTERISK-29596 Change-Id: Ibae9490c1b35cadbf7028d24610f745277c8535e	5 years ago
Joshua C. Colp	6ecc48086c	chan_nbs: Remove deprecated module. ASTERISK-29595 Change-Id: Ib5c7d43a780f2fb94cee90738e4c1af211ae4a33	5 years ago
Joshua C. Colp	6cc948f94e	chan_phone: Remove deprecated module. ASTERISK-29594 Change-Id: I79a9961cb5062fadbccb0ea93f087bdd32685316	5 years ago
Joshua C. Colp	95f3a4a9ad	chan_oss: Remove deprecated module. ASTERISK-29593 Change-Id: Ib53a42ad974c63871344b95078c61c188e43da99	5 years ago
Jaco Kroon	060ce10163	AC_HEADER_STDC causes a compile failure with autoconf 2.70 From https://www.mail-archive.com/bug-autoconf@gnu.org/msg04408.html > ... the long-obsolete AC_HEADER_STDC, previously used internally by > AC_INCLUDES_DEFAULT, used AC_EGREP_HEADER. The AC_HEADER_STDC macro > is now a no-op (and is not used at all within Autoconf anymore), so > that change is likely what made the first use of AC_EGREP_HEADER the > one inside the if condition, causing the observed results. The implication is that the test does nothing anyway, and due to it being a no-op from 2.70 onwards, results in the required not being set to yes, resulting in ./configure to fail. Change-Id: Ic1ff38d87f791fbf1f2a80512f81bb7110392460 Signed-off-by: Jaco Kroon <jaco@uls.co.za>	5 years ago
Jaco Kroon	4e038c1eaa	pbx_lua: Add LUA_VERSIONS environment variable to ./configure. On Gentoo it's possible to have multiple lua versions installed, all with a path of /usr, so it's not possible to use the current --with-lua option to determisticly pin to a specific version as is required by the Gentoo PMS standards. This environment variable allows to lock to specific versions, unversioned check will be skipped if this variable is supplied. Change-Id: I8c403eda05df25ee0193960262ce849c7d2fd088 Signed-off-by: Jaco Kroon <jaco@uls.co.za>	5 years ago
lvl	b08427134f	Introduce astcachedir, to be used for temporary bucket files As described in the issue, /tmp is not a suitable location for a large amount of cached media files, since most distributions make /tmp a RAM-based tmpfs mount with limited capacity. I opted for a location that can be configured separately, as opposed to using a subdirectory of spooldir, given the different storage profile (transient files vs files that might stay there indefinitely). This commit just makes the cache directory configurable, and changes the default location from /tmp to /var/cache/asterisk. ASTERISK-29143 Change-Id: Ic54e95199405abacd9e509cef5f08fa14c510b5d	5 years ago
Alexander Traud	db4320a6a0	BuildSystem: Enable Lua 5.4. Note to maintainers: Lua 5.4, Lua 5.3, and Lua 5.2 have not been tested at runtime with pbx_lua. Until then, use the lowest available version of Lua, if you enabled the module pbx_lua at all. Change-Id: Ie5270448b11fcb4e2a53d899e4fe7fea793ce7e0	5 years ago
Alexander Traud	0a4dffe6f8	pjproject_bundled: Honor --without-pjproject. The previous change missed that 'make' uses 'PJPROJECT_BUNDLED' anyway. ASTERISK-28929 Change-Id: I7ef0e78a06ea391b59d95b99d46bbed3fec4fed9	6 years ago
Guido Falsi	c831f03273	pjproject: Remove bashism from configure.m4 script The configure.m4 script for pjproject contains some += syntax, which is specific to bash, replacing it with string substitutions makes the script compatible with traditional Bourne shells. ASTERISK-28866 #close Reported-by: Christoph Moench-Tegeder <cmt@FreeBSD.org> Change-Id: I382a78160e028044598b7da83ec7e1ff42b91c05	6 years ago
Alexander Traud	966acc6251	pjproject_bundled: Honor --without-pjproject. ASTERISK-28837 Change-Id: Id057324912a3cfe6f50af372675626bb515907d9	6 years ago
Alexander Traud	4ef5ba58f5	BuildSystem: Only if found LibPRI, check its optional parts. Change-Id: If8445f899ee4ce0c606c484943d4ce0c8e43b5da	6 years ago

1 2 3 4 5 ...

739 Commits (1d8f6d63d325aef649621f3fa24fbb613bd7efe4)