137 Commits (18f5f5fc99a8106c1856d13aeeeeafa2b13ef033)

Author	SHA1	Message	Date
Dan Cropp	e52fbae00f	chan_pjsip: Transmit REFER waits for the REFER result setting TRANSFERSTATUS ... Previously, when a Transfer (REFER) was performed, chan_pjsip would set the TRANSFERSTATUS to SUCCESS when the REFER was queued up. This did not reflect a successful/unsuccessful transfer the way chan_sip did. Added a callback module to process the refer subscription information. Now depends on res_pjsip_pubsub so call transfer progress can be monitored and reported ASTERISK-26968 #close Reported-by: Dan Cropp Change-Id: If6c27c757c66f71e8b75e3fe49da53ebe62395dc	6 years ago
agupta	d2f7b22640	chan_pjsip.c: Check for channel and session to not be NULL in hangup ... We have seen some rare case of segmentation fault in hangup function and we could notice that channel pointer was NULL. Debug log shows that there is a 200 OK answer and SIP timeout at the same time. It looks that while the SIP session was being destroyed due to timeout call hangup due to answer event lead to race condition and channel is being destroyed from two different places. The check ensures we check it not to be NULL before freeing it. ASTERISK-25371 Change-Id: I19f6566830640625e08f7b87bfe15758ad33a778	6 years ago
Alexei Gradinari	466a17964f	pjsip: replace 180 by 183 if SDP negotiation has completed ... The caller endpoint hears dead silence if a callee replies 180 (without SDP) and the caller already received 183 (with SDP). It happens because Asterisk sends 180 (WITH SDP) to the caller, there are not incoming RTP packets from the callee and Asterisk does not generate inband ringing, so there are not any outgoing RTP packets to the caller. This patch replaces 180 by 183 if SDP negotiation has completed, as if the caller endpoint is configured with "inband_progress=yes". In this case Asterisk will generate inband ringing untill Asterisk receive incoming RTP packets from the callee. ASTERISK-27994 #close Change-Id: I7450b751083ec30d68d6abffe922215a15ae5a73	7 years ago
Salah Ahmed	5009d6d97a	chan_pjsip: DTMF Mode auto_info fallback lead to both inband and info ... When the dtmf_mode on an endpoint is configured as "auto_info" Asterisk will produce an inband DTMF tone alongside an INFO message when sending DTMF. ASTERISK-28371 Change-Id: I1380b82f006e110a1b83fbb50c9873edd13a5d9a	7 years ago
Torrey Searle	4661c08549	chan_pjsip: add a flag to ignore 183 responses if no SDP present ... chan_sip will always ignore 183 responses that do not contain SDP however, chan_pjsip will currently always translate it into a 183 with SDP. This new flag allows chan_pjsip to have the same behavior as chan_sip. ASTERISK-28322 #close Change-Id: If81cfaa17c11b6ac703e3d71696f259d86c6be4a	7 years ago
Joshua Colp	50ac85cb40	stasis: Segment channel snapshot to reduce creation cost. ... When a channel snapshot was created it used to be done from scratch, copying all data (many strings). This incurs a cost when doing so. This change segments the channel snapshot into different components which can be reused if unchanged from the previous snapshot creation, reducing the cost. In normal cases this results in some pointers being copied with reference count being bumped, some integers being set, and a string or two copied. The other benefit is that it is now possible to determine if a channel snapshot update is redundant and thus stop it before a message is published to stasis. The specific segments in the channel snapshot were split up based on whether they are changed together, how often they are changed, and their general grouping. In practice only 1 (or 0) of the segments actually get changed in normal operation. Invalidation is done by setting a flag on the channel when the segment source is changed, forcing creation of a new segment when the channel snapshot is created. ASTERISK-28119 Change-Id: I5d7ef3df963a88ac47bc187d73c5225c315f8423	7 years ago
Joshua Colp	d0ccbb3377	stasis: Use an implementation specific channel snapshot cache. ... Channels no longer use the Stasis cache for channel snapshots. Instead they are stored in a hash table in stasis_channels which reduces the number of Stasis messages created and allows better storage. As a result the following APIs are no longer available since the stasis cache is no longer used: ast_channel_topic_cached() ast_channel_topic_all_cached() The ast_channel_cache_all() and ast_channel_cache_by_name() functions now return an ao2_container of ast_channel_snapshots rather than a container of stasis_messages therefore you can't (and don't need to) call stasis_cache functions on it. The ast_channel_topic_all() function now returns a normal topic not a cached one so you can't use stasis cache functions on it either. The ast_channel_snapshot_type() stasis message now has the ast_channel_snapshot_update structure as it's data. It contains the last snapshot and the new one. ast_channel_snapshot_get_latest() still returns the latest snapshot. The latest snapshot is now stored on the channel itself to eliminate cache hits when Stasis messages that have the snapshot as a payload are created. ASTERISK-28102 Change-Id: I9334febff60a82d7c39703e49059fa3a68825786	7 years ago
Alexei Gradinari	fa048183aa	pjsip: New function PJSIP_PARSE_URI to parse URI and return part of URI ... New dialplan function PJSIP_PARSE_URI added to parse an URI and return a specified part of the URI. This is useful when need to get part of the URI instead of cutting it using a CUT function. For example to get 'user' part of Remote URI ${PJSIP_PARSE_URI(${CHANNEL(pjsip,remote_uri)},user)} ASTERISK-28144 #close Change-Id: I5d828fb87f6803b6c1152bb7b44835f027bb9d5a	7 years ago
Alexei Gradinari	eee935983b	pjsip: new endpoint's options to control Connected Line updates ... This patch adds new options 'trust_connected_line' and 'send_connected_line' to the endpoint. The option 'trust_connected_line' is to control if connected line updates are accepted from this endpoint. The option 'send_connected_line' is to control if connected line updates can be sent to this endpoint. The default value is 'yes' for both options. Change-Id: I16af967815efd904597ec2f033337e4333d097cd	7 years ago
George Joseph	1725eaf8fb	chan_pjsip: Register for "BEFORE_MEDIA" responses ... chan_pjsip wasn't registering for "BEFORE_MEDIA" responses which meant it was not updating HANGUPCAUSE for 4XX responses. If the remote end sent a "180 Ringing", then a "486 Busy", the hangup cause was left at "180 Normal Clearing". * Removed chan_pjsip_incoming_response from the original session supplement (which was handling only "AFTER MEDIA") and added it to a new session supplement which accepts both "BEFORE_MEDIA" and "AFTER_MEDIA". * Also cleaned up some cleanup code in load module. ASTERISK-27902 Change-Id: If9b860541887aca8ac2c9f2ed51ceb0550fb007a	7 years ago
George Joseph	4fb7967c73	bridge_softmix: Forward TEXT frames ... Core bridging and, more specifically, bridge_softmix have been enhanced to relay received frames of type TEXT or TEXT_DATA to all participants in a softmix bridge. res_pjsip_messaging and chan_pjsip have been enhanced to take advantage of this so when res_pjsip_messaging receives an in-dialog MESSAGE message from a user in a conference call, it's relayed to all other participants in the call. res_pjsip_messaging already queues TEXT frames to the channel when it receives an in-dialog MESSAGE from an endpoint and chan_pjsip will send an MESSAGE when it gets a TEXT frame. On a normal point-to-point call, the frames are forwarded between the two correctly. bridge_softmix was not though so messages weren't getting forwarded to conference bridge participants. Even if they were, the bridging code had no way to tell the participants who sent the message so it would look like it came from the bridge itself. * The TEXT frame type doesn't allow storage of any meta data, such as sender, on the frame so a new TEXT_DATA frame type was added that uses the new ast_msg_data structure as its payload. A channel driver can queue a frame of that type when it receives a message from outside. A channel driver can use it for sending messages by implementing the new send_text_data channel tech callback and setting the new AST_CHAN_TP_SEND_TEXT_DATA flag in its tech properties. If set, the bridging/channel core will use it instead of the original send_text callback and it will get the ast_msg_data structure. Channel drivers aren't required to implement this. Even if a TEXT_DATA enabled driver uses it for incoming messages, an outgoing channel driver that doesn't will still have it's send_text callback called with only the message text just as before. * res_pjsip_messaging now creates a TEXT_DATA frame for incoming in-dialog messages and sets the "from" to the display name in the "From" header, or if that's empty, the caller id name from the channel. This allows the chat client user to set a friendly name for the chat. * bridge_softmix now forwards TEXT and TEXT_DATA frames to all participants (except the sender). * A new function "ast_sendtext_data" was added to channel which takes an ast_msg_data structure and calls a channel's send_text_data callback, or if that's not defined, the original send_text callback. * bridge_channel now calls ast_sendtext_data for TEXT_DATA frame types and ast_sendtext for TEXT frame types. * chan_pjsip now uses the "from" name in the ast_msg_data structure (if it exists) to set the "From" header display name on outgoing text messages. Change-Id: Idacf5900bfd5f22ab8cd235aa56dfad090d18489	8 years ago
Richard Mudgett	237d341bbd	res_pjsip.c: Split ast_sip_push_task_synchronous() to fit expectations. ... ast_sip_push_task_synchronous() did not necessarily execute the passed in task under the specified serializer. If the current thread is any registered pjsip thread then it would execute the task immediately instead of under the specified serializer. Reentrancy issues could result if the task does not execute with the right serializer. The original reason ast_sip_push_task_synchronous() checked to see if the current thread was a registered pjsip thread was because of a deadlock with masquerades and the channel technology's fixup callback (ASTERISK_22936). A subsequent masquerade deadlock fix (ASTERISK_24356) involving call pickups avoided the original deadlock situation entirely. The PJSIP channel technology's fixup callback no longer needed to call ast_sip_push_task_synchronous(). However, there are a few places where this unexpected behavior is still required to avoid deadlocks. The pjsip monitor thread executes callbacks that do calls to ast_sip_push_task_synchronous() that would deadlock if the task were actually pushed to the specified serializer. I ran into one dealing with the pubsub subscriptions where an ao2 destructor called ast_sip_push_task_synchronous(). * Split ast_sip_push_task_synchronous() into ast_sip_push_task_wait_servant() and ast_sip_push_task_wait_serializer(). ast_sip_push_task_wait_servant() has the old behavior of ast_sip_push_task_synchronous(). ast_sip_push_task_wait_serializer() has the new behavior where the task is always executed by the specified serializer or a picked serializer if one is not passed in. Both functions behave the same if the current thread is not a SIP servant. * Redirected ast_sip_push_task_synchronous() to ast_sip_push_task_wait_servant() to preserve API for released branches. ASTERISK_26806 Change-Id: Id040fa42c0e5972f4c8deef380921461d213b9f3	8 years ago
Joshua Colp	c7bd554094	pjsip / res_rtp_asterisk: Add support for sending REMB ... This change allows chan_pjsip to be given an AST_FRAME_RTCP containing REMB feedback and pass it to res_rtp_asterisk. Once res_rtp_asterisk receives the frame a REMB RTCP feedback packet is constructed with the appropriate contents and sent to the remote endpoint. ASTERISK-27776 Change-Id: Ic53f821c1560d8924907ad82c4d9c0bc322b38cd	8 years ago
Joshua Colp	e14b0e960d	res_rtp_asterisk: Add support for raising additional RTCP messages. ... This change extends the existing AST_FRAME_RTCP frame type to be able to contain additional RTCP message types, such as feedback messages. The payload type is contained in the subclass which allows knowing what is in the frame itself. The RTCP feedback message type is now handled and REMB[1] messages are raised with their containing information. This also fixes a bug where all feedback messages were triggering video updates instead of just FIR and FUR. Finally RTCP frames are now passed up through the Asterisk core to what is handling the channel, mapped appropriately in the case of bridging, and written to an outgoing stream. Since RTCP frames are on a per-stream basis this is only done on multistream capable channels. [1] https://tools.ietf.org/html/draft-alvestrand-rmcat-remb-03 ASTERISK-27758 ASTERISK-26366 Change-Id: I680da0ad8d5059d5e9655d896fb9d92e9da8491e	8 years ago
Corey Farrell	527cf5a570	Remove redundant module checks and references. ... This removes references that are no longer needed due to automatic references created by module dependencies. In addition this removes most calls to ast_module_check as they were checking modules which are listed as dependencies. Change-Id: I332a6e8383d4c72c8e89d988a184ab8320c4872e	8 years ago
Corey Farrell	9cfdb81e91	loader: Add dependency fields to module structures. ... * Declare 'requires' and 'enhances' text fields on module info structure. * Rename 'nonoptreq' to 'optional_modules'. * Update doxygen comments. Still need to investigate dependencies among modules I cannot compile. Change-Id: I3ad9547a0a6442409ff4e352a6d897bef2cc04bf	8 years ago
Sean Bright	fd0ca1c3f9	Remove as much trailing whitespace as possible. ... Change-Id: I873c1c6d00f447269bd841494459efccdd2c19c0	8 years ago
Richard Mudgett	4a461bcde4	chan_pjsip.c: Improve ast_request() diagnostic msgs. ... Attempting to dial PJSIP/endpoint when the endpoint doesn't exist and disable_multi_domain=no results in a misleading empty endpoint name message. The message should say the endpoint was not found. * Added missing endpoint not found message. * Added more information to the empty endpoint name msgs if available. * Eliminated RAII_VAR in request(). Change-Id: I21da85ebd62dcc32115b2ffcb5157416ebae51e4	8 years ago
Richard Mudgett	22810fc635	chan_pjsip/res_pjsip: Add CHANNEL(pjsip,request_uri) ... This patch does three things associated with the initial incoming INVITE request URI. 1) Add access to the full initial incoming INVITE request URI. 2) We were not setting DNID on incoming PJSIP channels. The DNID is the user portion of the initial incoming INVITE Request-URI. The value is accessed by reading CALLERID(dnid). 3) Fix CHANNEL(pjsip,target_uri) documentation. * The initial incoming INVITE request URI is now available using CHANNEL(pjsip,request_uri). * Set the DNID on PJSIP channel creation so CALLERID(dnid) can return the initial incoming INVITE request URI user portion. * CHANNEL(pjsip,target_uri) now correctly documents that the target URI is the contact URI. * Refactored print_escaped_uri() out of channel_read_pjsip() to handle pjsip_uri_print() error condition when the buffer is too small. ASTERISK-27478 Change-Id: I512e60d1f162395c946451becb37af3333337b33	8 years ago
Richard Mudgett	e793501084	chan_pjsip.c: Improve answer failure log messages. ... * Balanced the session->inv_session refs on answer failure. Change-Id: I33542d639d37e692cb46550b972a5fcfc3b804b8	8 years ago
Richard Mudgett	12010fc5c0	chan_pjsip.c: Fix uninitialized cause value on failure. ... Change-Id: I3f9dd3c31bd582e54a30381500077de2319d8cc3	8 years ago
Joshua Colp	f2985e3106	bridge: Change participant SFU streams when source streams change. ... Some endpoints do not like a stream being reused for a new media stream. The frame/jitterbuffer can rely on underlying attributes of the media stream in order to order the packets. When a new stream takes its place without any notice the buffer can get confused and the media ends up getting dropped. This change uses the SSRC change to determine that a new source is reusing an existing stream and then bridge_softmix renegotiates each participant such that they see a new media stream. This causes the frame/jitterbuffer to start fresh and work as expected. ASTERISK-27277 Change-Id: I30ccbdba16ca073d7f31e0e59ab778c153afae07	8 years ago
George Joseph	b6aa728a58	chan_pjsip: Ignore AST_CONTROL_STREAM_TOPOLOGY_CHANGED for now ... chan_pjsip_indicate was missing a case for the recently added AST_CONTROL_STREAM_TOPOLOGY_CHANGED condition and was returning an error and causing the call to be hung up instead of just ignoring it. ASTERISK-27260 Reported by: Daniel Heckl Change-Id: I4fecbb00a0b8a853da85155065c1a6bddf235e80	8 years ago
Ben Ford	bfc29de3ea	chan_pjsip: Suppress frame warnings. ... When rtp_keepalive is on for a PJSIP endpoint dialing to another Asterisk instance also using PJSIP, Asterisk will continue to print warning messages about not being able to send frames of a certain type. This suppresses that warning message. Change-Id: I0332a05519d7bda9cacfa26d433909ff1909be67	8 years ago
Richard Mudgett	850a3fd017	chan_pjsip.c: Fix topology refresh response code accuracy. ... There are other 1xx and 2xx codes than 100 and 200 respectively. Change-Id: I680db0997343256add1478714f5bf5b5569aee17	8 years ago
Torrey Searle	a2dde59154	res_rtp_asterisk: Make P2P bridge Asymmetric codec aware ... Introduce a new property to rtp-engine to make it aware of the desire for assymetric codecs or not. If asymmetric codecs is not allowed, the bridge will compare read/write formats and shut down the p2p bridge if needed ASTERISK-26745 #close Change-Id: I0d9c83e5356df81661e58d40a8db565833501a6f	8 years ago
Torrey Searle	65c560894d	chan_pjsip: add a new function PJSIP_DTMF_MODE ... This function is a replica of SIPDtmfMode, allowing the DTMF mode of a PJSIP call to be modified on a per-call basis ASTERISK-27085 #close Change-Id: I20eef5da3e5d1d3e58b304416bc79683f87e7612	8 years ago
Joshua Colp	a6eb9ee7d2	core: Add VP9 passthrough support. ... This change adds VP9 as a known codec and creates a cached "vp9" media format for use. Change-Id: I025a93ed05cf96153d66f36db1839109cc24c5cc	8 years ago
Kevin Harwell	7da6ddda30	res_pjsip: Add "webrtc" configuration option ... This patch creates a new configuration option called "webrtc". When enabled it defaults and enables the following options that are needed in order for webrtc to work in Asterisk: rtcp-mux, use_avpf, ice_support, and use_received_transport=enabled media_encryption=dtls dtls_verify=fingerprint dtls_setup=actpass When "webrtc" is enabled, this patch also parses the "msid" media level attribute from an SDP. It will also appropriately add it onto the outgoing session when applicable. Lastly, when "webrtc" is enabled h264 RTCP FIR feedback frames are now sent. ASTERISK-27119 #close Change-Id: I5ec02e07c5d5b9ad86a34fdf31bf2f9da9aac6fd	8 years ago
Jenkins2	0f45c979a3	Merge "res_rtp_asterisk / res_pjsip: Add support for BUNDLE."	8 years ago
Joshua Colp	065c3005ad	res_rtp_asterisk / res_pjsip: Add support for BUNDLE. ... BUNDLE is a specification used in WebRTC to allow multiple streams to use the same underlying transport. This reduces the number of ICE and DTLS negotiations that has to occur to 1 normally. This change implements this by adding support for it to the RTP SDP module in PJSIP. BUNDLE can be turned on using the "bundle" option and on an offer we will offer to bundle streams together. On an answer we will accept any bundle groups provided. Once accepted each stream is bundled to another RTP instance for transport. For the res_rtp_asterisk changes the ability to bundle an RTP instance to another based on the SSRC received from the remote side has been added. For outgoing traffic if an RTP instance is bundled to another we will use the other RTP instance for any transport related things. For incoming traffic received from the transport instance we look up the correct instance based on the SSRC and use it for any non-transport related data. ASTERISK-27118 Change-Id: I96c0920b9f9aca7382256484765a239017973c11	8 years ago
Jenkins2	d2b32cd009	Merge "chan_pjsip: Fix ability to send UPDATE on COLP"	8 years ago
George Joseph	c0c99c7618	chan_pjsip: Fix ability to send UPDATE on COLP ... When connected_line_method is "invite", we're supposed to determine if the client can support UPDATE and if it can, send UPDATE instead of INVITE to avoid the SDP renegotiation. Not only was pjproject not setting the PJSIP_INV_SUPPORT_UPDATE flag, we were testing that invite_tsx wasn't NULL which isn't always the case. * Updated chan_pjsip/update_connected_line_information to drop the requirement that invite_tsx isn't NULL. * Submitted patch to pjproject sip_inv.c that sets the PJSIP_INV_SUPPORT_UPDATE flag correctly. * Updated pjsip.conf.sample to clarify what happens when "invite" is specified. ASTERISK-27095 Change-Id: Ic2381b3567b8052c616d96fbe79564c530e81560	8 years ago
Torrey Searle	fb7247c57c	res_pjsip: Add DTMF INFO Failback mode ... The existing auto dtmf mode reverts to inband if 4733 fails to be negotiated. This patch adds a new mode auto_info which will switch to INFO instead of inband if 4733 is not available. ASTERISK-27066 #close Change-Id: Id185b11e84afd9191a2f269e8443019047765e91	8 years ago
Mark Michelson	45df25a579	chan_pjsip: Add support for multiple streams of the same type. ... The stream topology (list of streams and order) is now stored with the configured PJSIP endpoints and used during the negotiation process. Media negotiation state information has been changed to be stored in a separate object. Two of these objects exist at any one time on a session. The active media state information is what was previously negotiated and the pending media state information is what the media state will become if negotiation succeeds. Streams and other state information is stored in this object using the index (or position) of each individual stream for easy lookup. The ability for a media type handler to specify a callback for writing has been added as well as the ability to add file descriptors with a callback which is invoked when data is available to be read on them. This allows media logic to live outside of the chan_pjsip module. Direct media has been changed so that only the first audio and video stream are directly connected. In the future once the RTP engine glue API has been updated to know about streams each individual stream can be directly connected as appropriate. Media negotiation itself will currently answer all the provided streams on an offer within configured limits and on an offer will use the topology created as a result of the disallow/allow codec lines. If a stream has been removed or declined we will now mark it as such within the resulting SDP. Applications can now also request that the stream topology change. If we are told to do so we will limit any provided formats to the ones configured on the endpoint and send a re-invite with the new topology. Two new configuration options have also been added to PJSIP endpoints: max_audio_streams: determines the maximum number of audio streams to offer/accept from an endpoint. Defaults to 1. max_video_streams: determines the maximum number of video streams to offer/accept from an endpoint. Defaults to 1. ASTERISK-27076 Change-Id: I8afd8dd2eb538806a39b887af0abd046266e14c7	8 years ago
Jenkins2	abe1dd3039	Merge "pjsip: Extend 'asymmetric_rtp_codec' option to include us changing."	8 years ago
Joshua Colp	5b80496b42	chan_pjsip: Update device state when in early media. ... The chan_pjsip module uses a calculation approach for determining device state. This means that in situations where we would expect device state to change we need to tell the core to query. A scenario that was missed is when early media was signaled. This change adds the notification for the core to query device state when we are told that early media is being provided. ASTERISK-27039 Change-Id: Iafebfd152894966344ff2e950a3cee9f59a3eb6f	8 years ago
Joshua Colp	d3e951edf5	pjsip: Extend 'asymmetric_rtp_codec' option to include us changing. ... PJSIP support in Asterisk differs from chan_sip in that it allows media to be sent as-is without transcoding provided the codecs were negotiated in the SDP. This is allowed according to the RFC. Support for this differs quite a lot though and some endpoints do not handle it well. This change extends the 'asymmetric_rtp_codec' option to also cover this case. When set to no (the default) the code behaves as chan_sip does - the best codec is selected and we will only ever send that, unless we change what we are sending if the remote side changes. When set to yes we will send media as-is without transcoding if the codec has been negotiated in the SDP. ASTERISK-26996 Change-Id: Ib1647f6902a0843e8c435946f831c2159e8d1d51	8 years ago
George Joseph	d6b2a58736	res_pjsip_session: Add cleanup to ast_sip_session_terminate ... If you use ast_request to create a PJSIP channel but then hang it up without causing a transaction to be sent, the session will never be destroyed. This is due ot the fact that it's pjproject that triggers the session cleanup when the transaction ends. app_chanisavail was doing this to get more granular channel state and it's also possible for this to happen via ARI. * ast_sip_session_terminate was modified to explicitly call the cleanup tasks and unreference session if the invite state is NULL AND invite_tsx is NULL (meaning we never sent a transaction). * chan_pjsip/hangup was modified to bump session before it calls ast_sip_session_terminate to insure that session stays valid while it does its own cleanup. * Added test events to session_destructor for a future testsuite test. ASTERISK-26908 #close Reported-by: Richard Mudgett Change-Id: I52daf6f757184e5544c261f64f6fe9602c4680a9	9 years ago
George Joseph	747beb1ed1	modules: change module LOAD_FAILUREs to LOAD_DECLINES ... In all non-pbx modules, AST_MODULE_LOAD_FAILURE has been changed to AST_MODULE_LOAD_DECLINE. This prevents asterisk from exiting if a module can't be loaded. If the user wishes to retain the FAILURE behavior for a specific module, they can use the "require" or "preload-require" keyword in modules.conf. A new API was added to logger: ast_is_logger_initialized(). This allows asterisk.c/check_init() to print to the error log once the logger subsystem is ready instead of just to stdout. If something does fail before the logger is initialized, we now print to stderr instead of stdout. Change-Id: I5f4b50623d9b5a6cb7c5624a8c5c1274c13b2b25	9 years ago
Norbert Varga	75f8167e66	chan_pjsip: Multidomain endpoint finding on call ... When PJSIP tries to call an endpoint with a domain (e.g. 1000@test.com), the user part is stripped down as it would be a trunk with a specified user, and only the host part is called as a PJSIP endpoint and can't be found. This is not correct in the case of a multidomain SIP account, so the stripping after the @ sign is done only if the whole endpoint (in multidomain case 1000@test.com) can't be found. ASTERISK-26248 Change-Id: I3a2dd6f57f3bd042df46b961eccd81d31ab202e6	9 years ago
Alexei Gradinari	e5e887be53	chan_pjsip: fix switching sending codec when asymmetric_rtp_codec=no ... The sending codec is switched to the receiving codec and then is switched back to the best native codec on EVERY receiving RTP packets. This is because after call of ast_channel_set_rawwriteformat there is call of ast_set_write_format which calls set_format which sets rawwriteformat to the best native format. This patch adds a new function ast_set_write_format_path which set specific write path on channel and uses this function to switch the sending codec. ASTERISK-26603 #close Change-Id: I5b7d098f8b254ce8f45546e6c36e5d324737f71d	9 years ago
zuul	0ec5abe592	Merge "Remove ASTERISK_REGISTER_FILE."	9 years ago
Joshua Colp	24d0907849	Merge "pjsip: Fix a few media bugs with reinvites and asymmetric payloads."	9 years ago
Corey Farrell	a6e5bae3ef	Remove ASTERISK_REGISTER_FILE. ... ASTERISK_REGISTER_FILE no longer has any purpose so this commit removes all traces of it. Previously exported symbols removed: * __ast_register_file * __ast_unregister_file * ast_complete_source_filename This also removes the mtx_prof static variable that was declared when MTX_PROFILE was enabled. This variable was only used in lock.c so it is now initialized in that file only. ASTERISK-26480 #close Change-Id: I1074af07d71f9e159c48ef36631aa432c86f9966	9 years ago
Joshua Colp	aed6c219a3	pjsip: Fix a few media bugs with reinvites and asymmetric payloads. ... When channel format changes occurred as a result of an RTP re-negotiation the bridge was not informed this had happened. As a result the bridge technology was not re-evaluated and the channel may have been in a bridge technology that was incompatible with its formats. The bridge is now unbridged and the technology re-evaluated when this occurs. The chan_pjsip module also allowed asymmetric codecs for sending and receiving. This did not work with all devices and caused one way audio problems. The default has been changed to NOT do this but to match the sending codec to the receiving codec. For users who want asymmetric codecs an option has been added, asymmetric_rtp_codec, which will return chan_pjsip to the previous behavior. The codecs returned by the chan_pjsip module when queried by the bridge_native_rtp module were also not reflective of the actual negotiated codecs. The nativeformats are now returned as they reflect the actual negotiated codecs. ASTERISK-26423 #close Change-Id: I6ec88c6e3912f52c334f1a26983ccb8f267020dc	9 years ago
Alexei Gradinari	2b9ad3a5f7	chan_pjsip: segfault on already disconnected session ... On heavy loaded system the TCP/TLS incoming calls could be disconnected by pjproject while these calls are being processed by asterisk. This patch uses functions pjsip_inv_add_ref/pjsip_inv_dec_ref to inform pjproject that an INVITE session is in use. ASTERISK-26482 #close Change-Id: Ia2e3e2f75358cdb530252a9ce158af3d5d9fdf33	9 years ago
Aaron An	18a8ca06eb	channels/chan_pjsip: fix HANGUPCAUSE function bug. ... HANGUPCAUSE not return 'SIP 200 Ok' when dialed channel answered. This patch change the call order of ast_queue_control_data and ast_queue_control in chan_pjsip_incoming_response. ASTERISK-26396 #close Reported by: AaronAn Tested by: AaronAn Change-Id: Ide2d31723d8d425961e985de7de625694580be61	9 years ago
Matt Jordan	c315460abb	channels/chan_pjsip: Add PJSIP_SEND_SESSION_REFRESH ... This patch adds a new PJSIP specific dialplan function, PJSIP_SEND_SESSION_REFRESH. When invoked on a PJSIP channel, the media session will be refreshed via either an UPDATE or re-INVITE request. When used in conjunction with the PJSIP_MEDIA_OFFER dialplan function, the formats in use on a PJSIP channel can be re-negotiated and changed dynamically after call setup. ASTERISK-26277 #close Change-Id: Ib98fe09ba889aafe26d58d32f0fd1323f8fd9b1b (cherry picked from commit eec60dd773)	9 years ago
zuul	ba2da66bd5	Merge "chan_pjsip.c: Fix deadlock potential in fax redirection."	9 years ago