Fixes issue where error msg
"Use of before/init after destruction"
was being printed on disabled messages
in dev mode. With this
fix if message is disabled
a warning will print.
ASTERISK-25548
Change-Id: Ie0d866d1cbc60c16dbef08bc65e99505c3c1adfa
SRTP SDES key lifetime support was added in ASTERISK_17899.
In that addition, the minimum key lifetime to be accepted was
set at the 10 hours @ 20ms/packet = 1800000 packets.
The firmware in the obi1xx ATA uses a hardcoded lifetime of
2^20 packets.
Lower the limit to 2^20 to support a wider field of clients.
ASTERISK-27967 #close
Change-Id: I81a0703c595a0c9101dfdf02300149a3cc39bf94
Separate "name" into "classname" and "name".
Use '.' for classname separator instead of '/'.
Prefix reserved words with '_'.
Wrap output with a top-level "testsuites" element.
Change-Id: Iec1a985eba1c478e5c1d65d5dfd95cb708442099
There is a rare case (do to the infrequent timing involved) where
CDR submission threads in batch mode can deadlock with a currently
running CDR batch process. This patch should remove the need for
holding the lock in the scheduler and should clean a few code
paths up that inconsistently submitted new work to the CDR batch
processor.
ASTERISK-27909
Change-Id: I6333e865db7c593c102c2fd948cecdb96481974d
Reported-by: Denis Lebedev
The AMI action was directly sending the text to the channel driver.
However, this makes two threads attempt to handle media and runs afowl of
CHECK_BLOCKING.
* Queue a read action to make the channel's media handling thread actually
send the text message. This changes the AMI actions success/fail response
to just mean the text was queued to be sent not that the text actually got
sent. The channel driver may not even support sending text messages.
ASTERISK-27943
Change-Id: I9dce343d8fa634ba5a416a1326d8a6340f98c379
In addition to text/* content types, incoming_in_dialog_request now
accepts application/* content types.
Also fixed a length issue when copying the body text. It was one
character short.
ASTERISK-27942
Change-Id: I4e54d8cc6158dc47eb8fdd6ba0108c6fd53f2818
* changes:
channel.c: Make CHECK_BLOCKING() save thread LWP id for messages.
channel.c: Fix usage of CHECK_BLOCKING()
autoservice: Don't start channel autoservice if the thread is a user interface.
With ./configure --enable-dev-mode[=noisy], the build fails because every
warning gets an error. Therefore, Asterisk has to be free of warnings and this
variable must go.
Change-Id: I63dd2bc4833b9bdb04602f83422d16caf289d46a
There can be one and only one thread handling a channel's media at a time.
Otherwise, we don't know which thread is going to handle the media frames.
ASTERISK-27625
Change-Id: I4d6a2fe7386ea447ee199003bf8ad681cb30454e
There can be one and only one thread handling a channel's media at a time.
Otherwise, we don't know which thread is going to handle the media frames.
ASTERISK-27625
Change-Id: Ia341f1a6f4d54f2022261abec9021fe5b2eb4905
The CHECK_BLOCKING() macro is used to indicate if a channel's handling
thread is about to do a blocking operation (poll, read, or write) of
media. A few operations such as ast_queue_frame(), soft hangup, and
masquerades use the indication to wake up the blocked thread to reevaluate
what is going on.
ASTERISK-27625
Change-Id: I4dfc33e01e60627d962efa29d0a4244cf151a84d
Executing dialplan functions from either AMI or ARI by getting a variable
could place the channel into autoservice. However, these user interface
threads do not handle the channel's media so we wind up with two threads
attempting to handle the media.
There can be one and only one thread handling a channel's media at a time.
Otherwise, we don't know which thread is going to handle the media frames.
ASTERISK-27625
Change-Id: If2dc94ce15ddabf923ed1e2a65ea0ef56e013e49
There was no real reason to limit the conteny type to text/plain other
than that's what it was limited to before. Now any text/* content
type will be allowed for channel drivers that don't support enhanced
messaging and any type will be allowed for channel drivers that do
support enhanced messaging.
Change-Id: I94a90cfee98b4bc8e22aa5c0b6afb7b862f979d9
ast_indicate is invoked with the bridge locked. As ast_indicate locks the
other end of the bridge as well this can lead to a deadlock in some situations.
(Especially when a different thread does the same in the reverse order).
This patch calls ast_indicate after unlocking the bridge which fixes the
deadlock. Calling ast_indicate with these parameters without locking the
bridge should be safe as this is done at different places without a
bridge lock.
ASTERISK-27094 #close
Reported-by: David Brillert
Change-Id: I5f86c1e2ce75b9929a36ab589b18c450e62ea35f
asterisk/tcptls.h was included (explicitly, implicitly, or transitively). Those
inclusions got replaced by forward declarations. As side effect, the inclusions
got completed.
ASTERISK-27878
Change-Id: I9d102728e30336d6522e5e4ae9e964013a0835f7
Additionally, this change allows auto-negotiation of the elliptic curve/group
for servers, not only with OpenSSL 1.0.2 but also with OpenSSL 1.1.0 and newer.
This enables X25519 (since OpenSSL 1.1.0) and X448 (since OpenSSL 1.1.1) as a
side-effect.
ASTERISK-27876
Change-Id: I62c2aba4a630aefc231b71f646207e8c027d9497
__ast_channel_alloc_ap() had a failure exit path that hadn't setup the fd
descriptors to -1 yet. The destructor would then attempt to close these
fd's that had never been opened.
Change-Id: Icf21093f36c60781e8cf6ee9d586536302af33e3
The config engine destroy_func callback function returns the number of
rows deleted or -1 on error. But the function
ast_destroy_realtime_fields treated non-zero return values as error.
ASTERISK-27863
Change-Id: Ied02b38e8196cb03043e609a0679feebd288d17b
Mantis-3709 (Commit 68ff3c3, Asterisk 1.2) added support for the video format
H.263+. For this, the RTP payload ID 103 got assigned statically. Commit f1aadc8
assigned another payload ID 98 for this format in Asterisk 1.6.
Change-Id: I90e35b158487f8f1f8187da6241b54cd3b74e667
This fixes build warnings found by GCC 8. In some cases format
truncation is intentional so the warning is just suppressed.
ASTERISK-27824 #close
Change-Id: I724f146cbddba8b86619d4c4a9931ee877995c84
Due to a fixed size buffer the digest authentication could be
incorrectly calculated if a large URI was provided, causing
authentication failure. The buffer is now dynamically allocated to allow
any size URI within the normal limits of the HTTP request size.
ASTERISK-27841
Change-Id: I660609db13b8f9e5f9567f339dd804f4985d41b3
If during translation a codec could not handle a given frame the translation
core would return NULL, thus not passing along the "missing" frame. Due to this
there was no frame to apply generic plc to, thus rendering it useless.
This patch makes it so the translation core produces an interpolated slin frame
in the cases where an attempt was made to translate to slin, but failed. This
interpolated frame is then passed along and can be used by the generic plc
algorithms to fill in the frame.
ASTERISK-27814 #close
Change-Id: I133d084da87adef913bf2ecc9c9240e3eaf4f40a
Chris-Savinovich
Nick French
George Joseph
Jenkins2
Matthew Fredrickson
Richard Mudgett
Alexander Traud
Joshua Colp
Kevin Harwell
Pirmin Walthert
Alexei Gradinari
Corey Farrell
Jaco Kroon