29720 Commits (15fbcc74d8fd1b3655f4c34a280fe76665bd0c5c)

 

All Branches   

Search

Author	SHA1	Message	Date
Kevin Harwell	e7d41050e0	app_stream_echo: misc bug fixes ... Fixed the following bugs: * calls to stream_echo_write had the last two parameters swapped * ast_read should have been ast_read_stream * added a null check on the frame's subclass format This also resets the update_sent flag upon receiving SRRCHANGE control frame. This will then force a video update. ASTERISK-26997 Change-Id: I6ad7c8253559b800800433c52339e7f5aa583566	8 years ago
Kevin Harwell	7df7b8a90c	res_rtp_asterisk: trigger source change control frame when dtls is established ... There needed to be a way to notify handlers upstream that DTLS had been established. This patch makes it so once DTLS has been estalished a source change control frame is put into the read queue. Any handlers can then watch for that frame and trigger off of it. ASTERISK-27096 #close Change-Id: I27ff344f5a8c691a1890dfe3254a4b1a49e7f4a0	8 years ago
George Joseph	f573e599c0	pjproject_bundled: Allow passing configure options to bundled ... There wasn't any good way to pass options like --host or --build down to the pjproject configure which makes cross-compiling difficult. * Added a new PJPROJECT_CONFIGURE_OPTS environment variable which can be used to pass arbitrary options to pjproject configure. * Automatically set the pjproject configure --host and --build options to match those supplied for the asterisk configure. ASTERISK-27097 #close Reported-by: Kinsey Moore Change-Id: I5fa776e110262851173002a26ffe1172e4c35b2e	8 years ago
George Joseph	c0c99c7618	chan_pjsip: Fix ability to send UPDATE on COLP ... When connected_line_method is "invite", we're supposed to determine if the client can support UPDATE and if it can, send UPDATE instead of INVITE to avoid the SDP renegotiation. Not only was pjproject not setting the PJSIP_INV_SUPPORT_UPDATE flag, we were testing that invite_tsx wasn't NULL which isn't always the case. * Updated chan_pjsip/update_connected_line_information to drop the requirement that invite_tsx isn't NULL. * Submitted patch to pjproject sip_inv.c that sets the PJSIP_INV_SUPPORT_UPDATE flag correctly. * Updated pjsip.conf.sample to clarify what happens when "invite" is specified. ASTERISK-27095 Change-Id: Ic2381b3567b8052c616d96fbe79564c530e81560	8 years ago
Jenkins2	366971827a	Merge "app_voicemail: IMAP connection control"	8 years ago
Torrey Searle	fb7247c57c	res_pjsip: Add DTMF INFO Failback mode ... The existing auto dtmf mode reverts to inband if 4733 fails to be negotiated. This patch adds a new mode auto_info which will switch to INFO instead of inband if 4733 is not available. ASTERISK-27066 #close Change-Id: Id185b11e84afd9191a2f269e8443019047765e91	8 years ago
Niklas Larsson	ab7d99e62d	app_queue: Add priority to AMI QueueStatus ... Add priority to callers in AMI QueueStatus response ASTERISK-27092 #close Change-Id: I8d1f737a72c7c38f4cfe1a4ee3ecc0a4f85bd199	8 years ago
Mark Michelson	45df25a579	chan_pjsip: Add support for multiple streams of the same type. ... The stream topology (list of streams and order) is now stored with the configured PJSIP endpoints and used during the negotiation process. Media negotiation state information has been changed to be stored in a separate object. Two of these objects exist at any one time on a session. The active media state information is what was previously negotiated and the pending media state information is what the media state will become if negotiation succeeds. Streams and other state information is stored in this object using the index (or position) of each individual stream for easy lookup. The ability for a media type handler to specify a callback for writing has been added as well as the ability to add file descriptors with a callback which is invoked when data is available to be read on them. This allows media logic to live outside of the chan_pjsip module. Direct media has been changed so that only the first audio and video stream are directly connected. In the future once the RTP engine glue API has been updated to know about streams each individual stream can be directly connected as appropriate. Media negotiation itself will currently answer all the provided streams on an offer within configured limits and on an offer will use the topology created as a result of the disallow/allow codec lines. If a stream has been removed or declined we will now mark it as such within the resulting SDP. Applications can now also request that the stream topology change. If we are told to do so we will limit any provided formats to the ones configured on the endpoint and send a re-invite with the new topology. Two new configuration options have also been added to PJSIP endpoints: max_audio_streams: determines the maximum number of audio streams to offer/accept from an endpoint. Defaults to 1. max_video_streams: determines the maximum number of video streams to offer/accept from an endpoint. Defaults to 1. ASTERISK-27076 Change-Id: I8afd8dd2eb538806a39b887af0abd046266e14c7	8 years ago
Joshua Colp	642f8356ab	res_rtp_asterisk: Fix issues with ICE renegotiation. ... When re-inviting to add more streams it is possible for the role of existing ICE sessions to be changed to the incorrect value. This results in subsequent refreshes within the sessions getting a role conflict and the ICE session breaking down. This change only sets the role to be the new value if an ICE renegotiation is actually going to happen, otherwise the existing role is preserved. As well if we encounter a situation where a unidirectional ICE negotiation happens and the other side does not send us candidates we will not store any information for sending traffic, even though we know where they are reachable. This change fixes this by using the source of the ICE traffic itself as the target if no candidates are known and we receive some ICE traffic. ASTERISK-27088 Change-Id: I71228181e358917fcefc3100fad21b2fc02a59a9	8 years ago
Torrey Searle	a48d3e4d31	res/res_pjsip_t38: fix incorrect increment of media_count ... The T38 sdp callback incorrectly has a side effect of incrementing the media_count. This can lead to core dumps. Change-Id: I7bb2f4987de4046ec52cfc34e5ea0662dae32af8	8 years ago
George Joseph	80e11bd79b	bridge_native_rtp: Keep rtp instance refs on bridge_channel ... There have been reports of deadlocks caused by an attempt to send a frame to a channel's rtp instance after the channel has left the native bridge and been destroyed. This patch effectively causes the bridge channel to keep a reference to the glue and both the audio and video rtp instances so what gets started will get stopped. ASTERISK-26978 #close Reported-by: Ross Beer Change-Id: I9e1ac49fa4af68d64826ccccd152593cf8cdb21a	8 years ago
Ivan Poddubny	7827755570	app_queue: Fix returning to dialplan when a queue is empty ... The fix for ASTERISK-25665 introduced a regression. The return value of queue_exec used to be 0 in case of leavewhenempty but it was changed to -1 (returned from wait_our_turn and passed transparently by queue_exec), thus leading to hangup instead of returning back to dialplan. This commit resets the value back to 0 in this case, restoring original behavior. ASTERISK-27065 #close Reported by: Marek Cervenka Change-Id: Id9c83b75aeda463250155e88c5004be52bbca5ac	8 years ago
Jenkins2	d59b0efabd	Merge "res_pjsip_mwi: update unsolicited MWI subscriptions on updating contact"	8 years ago
Alexei Gradinari	0cef7b9d4e	app_voicemail: IMAP connection control ... A new global option "imap_poll_logout" was added to specify whether need to disconnect from the IMAP server after polling of mailboxes. ASTERISK-27068 #close Closing IMAP connection after loading mailbox from voicemail.conf ASTERISK-24052 #close Change-Id: Ib7558ba04516240a32b65f42e9be64372a0ae12a	8 years ago
Richard Mudgett	975e271b01	res_pjsip_mwi.c: Eliminate RAII_VAR in contact delete observer ... Change-Id: I0bc97c6608de1d1a4228826b3b3be43f162f05f3	8 years ago
Alexei Gradinari	34db4c3993	res_pjsip_mwi: update unsolicited MWI subscriptions on updating contact ... Do not need to unsubscribe/subscribe on creating the ednpoint's contact. The modified function create_mwi_subscriptions_for_endpoint adds the subscription only if it does not exist. The subscriptions aren't added for active contacts which are retrieved on startup from realtime if mwi_disable_initial_unsolicited=yes. Because the mwi_contact_added is not called. So the subscriptions also should be created on updating contact. ASTERISK-26230 #close Change-Id: I47e265af9296ca09aa42a316fdacac104148cee4	8 years ago
Jenkins2	01536546e2	Merge "bridge: stuck channel(s) after failed attended transfer"	8 years ago
Jenkins2	0cf331d7e9	Merge "core_local: local channel data not being properly unref'ed and unlocked"	8 years ago
Kevin Harwell	27dae55fb6	core_local: local channel data not being properly unref'ed and unlocked ... In an earlier version of Asterisk a local channel [un]lock all functions were added in order to keep a crash from occurring when a channel hung up too early during an attended transfer. Unfortunately, when a transfer failure occurs and depending on the timing, the local channels sometime do not get properly unlocked and deref'ed after being locked and ref'ed. This happens because the underlying local channel structure gets NULLed out before unlocking. This patch reworks those [un]lock functions and makes sure the values that get locked and ref'ed later get unlocked and deref'ed. ASTERISK-27074 #close Change-Id: Ice96653e29bd9d6674ed5f95feb6b448ab148b09	8 years ago
Kevin Harwell	45a1f4e2ae	bridge: stuck channel(s) after failed attended transfer ... If an attended transfer failed it was possible for some of the channels involved to get "stuck" because Asterisk was not hanging up the transfer target. This patch ensures Asterisk hangs up the transfer target when an attended transfer failure occurs. ASTERISK-27075 #close Change-Id: I98a6ecd92d3461ab98c36f0d9451d23adaf3e5f9	8 years ago
Jenkins2	db5e269365	Merge "res_corosync: Change thread stack size"	8 years ago
Richard Mudgett	d2fbbdd692	SDP: Create declined m= SDP lines using remote SDP if applicable. ... * Update SDP unit tests to test negotiating with declined streams. Generation of declined m= lines created and responded tested. Change-Id: I5cb99f5010994ab0c7d9cf2d395eca23fab37b98	8 years ago
Richard Mudgett	3a18a09030	SDP: Rework SDP offer/answer model and update capabilities merges. ... The SDP offer/answer model requires an answer to an offer before a new SDP can be processed. This allows our local SDP creation to be deferred until we know that we need to create an offer or an answer SDP. Once the local SDP is created it won't change until the SDP negotiation is restarted. An offer SDP in an initial SIP INVITE can receive more than one answer SDP. In this case, we need to merge each answer SDP with our original offer capabilities to get the currently negotiated capabilities. To satisfy this requirement means that we cannot update our proposed capabilities until the negotiations are restarted. Local topology updates from ast_sdp_state_update_local_topology() are merged together until the next offer SDP is created. These accumulated updates are then merged with the current negotiated capabilities to create the new proposed capabilities that the offer SDP is built. Local topology updates are merged in several passes to attempt to be smart about how streams from the system are matched with the previously negotiated stream slots. To allow for T.38 support when merging, type matching considers audio and image types to be equivalent. First streams are matched by stream name and type. Then streams are matched by stream type only. Any remaining unmatched existing streams are declined. Any new active streams are either backfilled into pre-merge declined slots or appended onto the end of the merged topology. Any excess new streams above the maximum supported number of streams are simply discarded. Remote topology negotiation merges depend if the topology is an offer or answer. An offer remote topology negotiation dictates the stream slot ordering and new streams can be added. A remote offer can do anything to the previously negotiated streams except reduce the number of stream slots. An answer remote topology negotiation is limited to what our offer requested. The answer can only decline streams, pick codecs from the offered list, or indicate the remote's stream hold state. I had originally kept the RTP instance if the remote offer SDP changed a stream type between audio and video since they both use RTP. However, I later removed this support in favor of simply creating a new RTP instance since the stream's purpose has to be changing anyway. Any RTP packets from the old stream type might cause mischief for the bridged peer. * Added ast_sdp_state_restart_negotiations() to restart the SDP offer/answer negotiations. We will thus know to create a new local SDP when it is time to create an offer or answer. * Removed ast_sdp_state_reset(). Save the current topology before starting T.38. To recover from T.38 simply update the local topology to the saved topology and restart the SDP negotiations to get the offer SDP renegotiating the previous configuration. * Allow initial topology for ast_sdp_state_alloc() to be NULL so an initial remote offer SDP can dictate the streams we start with. We can always update the local topology later if it turns out we need to offer SDP first because the remote chose to defer sending us a SDP. * Made the ast_sdp_state_alloc() initial topology limit to max_streams, limit to configured codecs, handle declined streams, and discard unsupported types. * Convert struct ast_sdp to ao2 object. Needed to easily save off a remote SDP to refer to later for various reasons such as generating declined m= lines in the local SDP. * Improve converting remote SDP streams to a topology including stream state. A stream state of AST_STREAM_STATE_REMOVED indicates the stream is declined/dead. * Improve merging streams to take into account the stream state. * Added query for remote hold state. * Added maximum streams allowed SDP config option. * Added ability to create new streams as needed. New streams are created with configured default audio, video, or image codecs depending on stream type. * Added global locally_held state along with a per stream local hold state. Historically, Asterisk only has a global locally held state because when the we put the remote on hold we do it for all active streams. * Added queries for a rejected offer and current SDP negotiation role. The rejected query allows the using module to know how to respond to a failed remote SDP set. Should the using module respond with a 488 Not Acceptable Here or 500 Internal Error to the offer SDP? * Moved sdp_state_capabilities.connection_address to ast_sdp_state. There seems no reason to keep it in the sdp_state_capabilities struct since it was only used by the ast_sdp_state.proposed_capabilities instance. * Callbacks are now available to allow the using module some customization of negotiated streams and to complete setting up streams for use. See the typedef doxygen for each callback for what is allowable and when they are called. * Added topology answerer modify callback. * Added topology pre and post apply callbacks. * Added topology offerer modify callback. * Added topology offerer configure callback. * Had to rework the unit tests because I changed how SDP topologies are merged. Replaced several unit tests with new negotiation tests. Change-Id: If07fe6d79fbdce33968a9401d41d908385043a06	8 years ago
Jenkins2	0c0d69d4f3	Merge "cdr: fix mistake spelling of a word for Unanswered."	8 years ago
Joshua Colp	0ecf504de9	Merge "res_pjsip_mwi: unsubscribe unsolicited MWI on deleting endpoint last contact"	8 years ago
Joshua Colp	57bbba7d43	Merge "res_stasis: Plug reference leak on stolen channels"	8 years ago
Corey Farrell	70d2ccb9da	Core: Add support for systemd socket activation. ... This change adds support for socket activation of certain SOCK_STREAM listeners in Asterisk: * AMI / AMI over TLS * CLI * HTTP / HTTPS Example systemd units are provided. This support extends to any socket which is initialized using ast_tcptls_server_start, so any unknown modules using this function will support socket activation. Asterisk continues to function as normal if socket activation is not enabled or if systemd development headers are not available during build. ASTERISK-27063 #close Change-Id: Id814ee6a892f4b80d018365c8ad8d89063474f4d	8 years ago
Rodrigo Ramírez Norambuena	a7488f8a70	cdr: fix mistake spelling of a word for Unanswered. ... Change-Id: I7a610bef369924523a445c7e849ee88cc45dc5df	8 years ago
George Joseph	3f5bf287a2	Merge "SDP: Add get/set option calls for RTP sched context per type."	8 years ago
Jenkins2	317234bdc6	Merge "res_pjsip: New endpoint option "notify_early_inuse_ringing""	8 years ago
Jenkins2	d57378d522	Merge "app_voicemail: IMAP logout on reload/unload"	8 years ago
Alexei Gradinari	d7b6e06abb	res_pjsip_mwi: unsubscribe unsolicited MWI on deleting endpoint last contact ... If the endpoint's last contact is deleted unsolicited MWI has to be unsubscribed. ASTERISK-27051 #close Change-Id: I33e174e0b9dba0998927d16d6d100fda5c7254e0	8 years ago
Joshua Colp	58d50025a0	Merge "formats/format_g729: Fix typo in comment"	8 years ago
George Joseph	854a6de819	res_stasis: Plug reference leak on stolen channels ... When a stasis channel is stolen by another app, the control structure is unreffed but never unlinked from the app_controls container. This causes the channel reference to leak. Added OBJ_UNLINK to the callback in channel_stolen_cb. Also added some additional channel lifecycle debug messages to channel.c. ASTERISK-27059 #close Repoorted-by: George Joseph Change-Id: Ib820936cd49453f20156971785e7f4f182c56e14	8 years ago
Matthew Fredrickson	e33bd96638	formats/format_g729: Fix typo in comment ... There was a typo in a comment. This commit is to fix the typo. ASTERISK-27060 #close Change-Id: Ic2699f8dbeaacd58ccb6ec3203e853e1babe3235	8 years ago
Frederic LE FOLL	0ad95bc8a0	Core/PBX: Deadlock between dialplan execution and application unregistration. ... Not easy to reproduce, but we have noticed deadlocks when unloading a module while dialplan is handling a request. The deadlock is between : 1) Dialplan execution: pbx_extension_helper() first taking conlock, then pbx_findapp() [when called] asking for lock on apps list. 2) Application unregistration: ast_unregister_application() first taking lock on apps list, then unreference_cached_app() [when called] asking for conlock. As a protection, I suggest to modify ast_unregister_application(), so that it anticipates the need of conlock, before taking the lock on apps list. The side effect is a longer unavailability of conlock when unregistering an application. ASTERISK-27041 Change-Id: I0db0f1eb320da6a5758cce3a47d765be1face8e2	8 years ago
Joshua Colp	0405185357	Merge "SDP: Search for the ice-lite attribute in the right place."	8 years ago
Jenkins2	d81293a5dd	Merge changes from topic 'sdp_api_adjustments' ... * changes: SDP: Set the remote c= line in RTP instance. SDP: Add t= line in sdp_create_from_state() stream: Ignore declined streams for some topology calls.	8 years ago
Jenkins2	2f684eb6a5	Merge "stream: Add ast_stream_topology_del_stream() and unit test."	8 years ago
Alexei Gradinari	7a46309d3d	res_pjsip: New endpoint option "notify_early_inuse_ringing" ... This option was added to control whether to notify dialog-info state 'early' or 'confirmed' on Ringing when already INUSE. The value "yes" is useful for some SIP phones (Cisco SPA) to be able to indicate and pick up ringing devices. ASTERISK-26919 #close Change-Id: Ie050bc30023543c7dfb4365c5be3ce58c738c711	8 years ago
Jenkins2	322a1c3222	Merge "res_ari: Add "module loaded" check to ari stubs"	8 years ago
Alexei Gradinari	53b7df82f4	app_voicemail: IMAP logout on reload/unload ... Closing IMAP connection on module reload or unload. ASTERISK-24052 #close Change-Id: I2a40182aa9ef249fa6865d33570430e9ada68525	8 years ago
Jan Friesse	9aeab4aced	res_corosync: Change thread stack size ... In Corosync 2.x libraries were changed to use LibQB IPC. Sadly LibQB IPC doesn't support copy-free access to received buffer, so Corosync libraries were rewritten to use stack as buffer. Mostly the needed stack size is quite small, but for all *_dispatch functions, 1MiB is needed. Asterisk function ast_pthread_create_background set stack size for new thread to much smaller AST_BACKGROUND_STACKSIZE (~500KiB). This results in Asterisk crash when running with Corosync 2.x. Patch solves this issue by creating it's own version of ast_pthread_create_background which sets stack size to much higher value (actually it's AST_BACKGROUND_STACKSIZE + 3MiB). Another problem may appear when "corosync show members" netconsole command is executed. It is also executed in thread and also has only 500KiB stack size. Sadly it calls corosync_cfg_get_node_addrs which again needs at least 1MiB stack. Solution is to use HAVE_COROSYNC_CFG_STATE_TRACK as a discriminator between Corosync 1.x and 2.x. If 1.x is found, nothing changes. If 2.x is found, NodeID is displayed instead of IP address. ASTERISK-25370 #close Reported by: mdu113 Change-Id: Id95b0d21ab6e708e7d74ad8786c587211676fa08	8 years ago
Jenkins2	b1f46c2a36	Merge "chan_pjsip: Fix PJSIP_MEDIA_OFFER dialplan function read."	8 years ago
George Joseph	1ac0096512	res_ari: Add "module loaded" check to ari stubs ... The recent change to make the use of LOAD_DECLINE more consistent caused res_ari to unload itself before declining if the ari.conf file wasn't found. The ari stubs though still tried to use the configuration resulting in segfaults. This patch creates a new CHECK_ARI_MODULE_LOADED macro which tests to see if res_ari is actually loaded and causes the stubs to also decline if it isn't. The macro was then added to the mustache template's "load_module" function. ASTERISK-27026 #close Reported-by: Ronald Raikes Change-Id: I263d56efa628ee3c411bdcd16d49af6260c6c91d	8 years ago
Joshua Colp	41bd01c861	Merge "channel: Fix reference counting in ast_channel_suppress."	8 years ago
Jenkins2	2adc0aef19	Merge "res_pjsip_pubsub: Fix reference to released endpoint"	8 years ago
Joshua Colp	1f2ab6e72a	Merge "bridge: Add a deferred queue."	8 years ago
Richard Mudgett	11ec2945c7	chan_pjsip: Fix PJSIP_MEDIA_OFFER dialplan function read. ... The construction of the returned string assumed incorrectly that the supplied buffer would always be initialized as an empty string. If it is not an empty string we could overrun the supplied buffer by the length of the non-empty buffer string plus one. It is also theoreticaly possible for the supplied buffer to be overrun by a string terminator during a read operation even if the supplied buffer is an empty string. * Fix the assumption that the supplied buffer would already be an empty string. The buffer is not guaranteed to contain an empty string by all possible callers. * Fix string terminator buffer overrun potential. Change-Id: If6a0806806527678c8554b1dcb34fd7808aa95c9	8 years ago
Richard Mudgett	e563a1920e	SDP: Add get/set option calls for RTP sched context per type. ... Change-Id: I82dc75c63c48904e9e5a49e2205dcc06e88487e4	8 years ago