asterisk

Commit Graph

Author	SHA1	Message	Date
Naveen Albert	7b0566f8f4	sig_analog: Skip Caller ID spill if usecallerid=no. If Caller ID is disabled for an FXS port, then we should not send any Caller ID spill on the line, as we have no Caller ID information that we can/should be sending. Resolves: #1394 (cherry picked from commit `54cab33a43`)	2 months ago
Naveen Albert	415daae95f	users.conf: Remove deprecated users.conf integration. users.conf was deprecated in Asterisk 21 and is now being removed for Asterisk 23, in accordance with the Asterisk deprecation policy. This consists of: * Removing integration with app_directory, app_voicemail, chan_dahdi, chan_iax2, and AMI. * users.conf was also partially used for res_phoneprov, and this remaining functionality is consolidated to a separate phoneprov_users.conf, used only by res_phoneprov. Resolves: #1292 UpgradeNote: users.conf has been removed and all channel drivers must be configured using their specific configuration files. The functionality previously in users.conf for res_phoneprov is now in phoneprov_users.conf.	4 months ago
Naveen Albert	2ced79259a	sig_analog: Add Call Waiting Deluxe support. Adds support for Call Waiting Deluxe options to enhance the current call waiting feature. As part of this change, a mechanism is also added that allows a channel driver to queue an audio file for Dial() to play, which is necessary for the announcement function. ASTERISK-30373 #close Resolves: #271 UserNote: Call Waiting Deluxe can now be enabled for FXS channels by enabling its corresponding option.	6 months ago
Naveen Albert	78546868f9	sig_analog: Add Last Number Redial feature. This adds the Last Number Redial feature to simple switch. UserNote: Users can now redial the last number called if the lastnumredial setting is set to yes. Resolves: #437	10 months ago
chrsmj	e9682be4ab	samples: remove and/or change some wiki mentions Cleaned some dead links. Replaced word wiki with either docs or link to https://docs.asterisk.org/ Resolves: #974	12 months ago
Naveen Albert	d1fb397cfc	general: Fix broken links. This fixes a number of broken links throughout the tree, mostly caused by wiki.asterisk.org being replaced with docs.asterisk.org, which should eliminate the need for sporadic fixes as in `f28047db36`. Resolves: #430	2 years ago
Naveen Albert	37e4af6a09	chan_dahdi: Clarify scope of callgroup/pickupgroup. Internally, chan_dahdi only applies callgroup and pickupgroup to FXO signalled channels, but this is not documented anywhere. This is now documented in the sample config, and a warning is emitted if a user tries configuring these settings for channel types that do not support these settings, since they will not have any effect. Resolves: #294	2 years ago
Naveen Albert	301b0258bf	sig_analog: Add Called Subscriber Held capability. This adds support for Called Subscriber Held for FXS lines, which allows users to go on hook when receiving a call and resume the call later from another phone on the same line, without disconnecting the call. This is a convenience mechanism that most real PSTN telephone switches support. ASTERISK-30372 #close Resolves: #240 UserNote: Called Subscriber Held is now supported for analog FXS channels, using the calledsubscriberheld option. This allows a station user to go on hook when receiving an incoming call and resume from another phone on the same line by going on hook, without disconnecting the call.	2 years ago
Naveen Albert	d16046e41f	chan_dahdi: Allow autoreoriginating after hangup. Currently, if an FXS channel is still off hook when all calls on the line have hung up, the user is provided reorder tone until going back on hook again. In addition to not reflecting what most commercial switches actually do, it's very common for switches to automatically reoriginate for the user so that dial tone is provided without the user having to depress and release the hookswitch manually. This can increase convenience for users. This behavior is now supported for kewlstart FXS channels. It's supported only for kewlstart (FXOKS) mainly because the behavior doesn't make any sense for ground start channels, and loop start signalling doesn't provide the necessary DAHDI event that makes this easy to implement. Likely almost everyone is using FXOKS over FXOLS anyways since FXOLS is pretty useless these days. ASTERISK-30357 #close Resolves: #224 UserNote: The autoreoriginate setting now allows for kewlstart FXS channels to automatically reoriginate and provide dial tone to the user again after all calls on the line have cleared. This saves users from having to manually hang up and pick up the receiver again before making another call.	2 years ago
Naveen Albert	e1a1ae933b	sig_analog: Allow three-way flash to time out to silence. sig_analog allows users to flash and use the three-way dial tone as a primitive hold function, simply by never timing it out. Some systems allow this dial tone to time out to silence, so the user is not annoyed by a persistent dial tone. This option allows the dial tone to time out normally to silence. ASTERISK-30004 #close Resolves: #205 UserNote: The threewaysilenthold option now allows the three-way dial tone to time out to silence, rather than continuing forever.	2 years ago
Naveen Albert	8cd7548e43	sig_analog: Allow immediate fake ring to be suppressed. When immediate=yes on an FXS channel, sig_analog will start fake audible ringback that continues until the channel is answered. Even if it answers immediately, the ringback is still audible for a brief moment. This can be disruptive and unwanted behavior. This adds an option to disable this behavior, though the default behavior remains unchanged. ASTERISK-30003 #close Resolves: #118 UserNote: The immediatering option can now be set to no to suppress the fake audible ringback provided when immediate=yes on FXS channels.	2 years ago
Naveen Albert	273ad73d99	sig_analog: Add fuller Caller ID support. A previous change, ASTERISK_29991, made it possible to send additional Caller ID parameters that were not previously supported. This change adds support for analog DAHDI channels to now be able to receive these parameters for on-hook Caller ID, in order to enhance the usability of CPE that support these parameters. Resolves: #94 ASTERISK-30331 UserNote: Additional Caller ID properties are now supported on incoming calls to FXS stations, namely the redirecting reason and call qualifier.	2 years ago
Naveen Albert	9a999242b2	chan_dahdi: Add dialmode option for FXS lines. Currently, both pulse and tone dialing are always enabled on all FXS lines, with no way of disabling one or the other. In some circumstances, it is desirable or necessary to disable one of these, and this behavior can be problematic. A new "dialmode" option is added which allows setting the methods to support on a per channel basis for FXS (FXO signalled lines). The four options are "both", "pulse", "dtmf"/"tone", and "none". Additionally, integration with the CHANNEL function is added so that this setting can be updated for a channel during a call. Resolves: #35 ASTERISK-29992 UserNote: A "dialmode" option has been added which allows specifying, on a per-channel basis, what methods of subscriber dialing (pulse and/or tone) are permitted. Additionally, this can be changed on a channel at any point during a call using the CHANNEL function.	3 years ago
Naveen Albert	67186aad56	chan_dahdi: Allow FXO channels to start immediately. Currently, chan_dahdi will wait for at least one ring before an incoming call can enter the dialplan. This is generally necessary in order to receive the Caller ID spill and/or distinctive ringing detection. However, if neither of these is required, then there is nothing gained by waiting for one ring and this unnecessarily delays call setup. Users can now use immediate=yes to make FXO channels (FXS signaled) begin processing dialplan as soon as Asterisk receives the call. ASTERISK-30305 #close Change-Id: I20818b370b2e4892c7f40c8a8753fa06a81750b5	3 years ago
Naveen Albert	19c841950b	chan_dahdi: Don't append cadences on dahdi restart. Currently, if any custom ring cadences are specified, they are appended to the array of cadences from wherever we left off last time. This works properly the first time, but on subsequent dahdi restarts, it means that the existing cadences are left alone and (most likely) the same cadences are then re-added afterwards. In short order, the cadence array gets maxed out and the user begins seeing warnings that the array is full and no more cadences may be added. This buggy behavior persists until Asterisk is completely restarted; however, if and when dahdi restart is run again, then the same problem is reintroduced. This fixes this behavior so that cadence parsing is more idempotent, that is so running dahdi restart multiple times starts adding cadences from the beginning, rather than from wherever the last cadence was added. As before, it is still not possible to revert to the default cadences by simply removing all cadences in this manner, nor is it possible to delete existing cadences. However, this does make it possible to update existing cadences, which was not possible before, and also ensures that the cadences remain unchanged if the config remains unchanged. ASTERISK-29990 #close Change-Id: Ie32ea3e8a243b766756b1afce684d4a31ee7421d	4 years ago
Josh Soref	b9e888418e	configs: Spelling fixes Correct typos of the following word families: password excludes undesirable checksums through screening interpreting database causes initiation member busydetect defined severely throughput recognized counter require indefinitely accounts ASTERISK-29714 Change-Id: Ie8f2a7b274a162dd627ee6a2165f5e8a3876527e	4 years ago
Sarah Autumn	466eb4a52b	sig_analog: Changes to improve electromechanical signalling compatibility This changeset is intended to address compatibility issues encountered when interfacing Asterisk to electromechanical telephone switches that implement ANI-B, ANI-C, or ANI-D. In particular the behaviours that this impacts include: - FGC-CAMA did not work at all when using MF signaling. Modified the switch case block to send calls to the correct part of the signaling-handling state machine. - For FGC-CAMA operation, the delay between called number ST and second wink for ANI spill has been made configurable; previously all calls were made to wait for one full second. - After the ANI spill, previous behavior was to require a 'ST' tone to advance the call. This has been changed to allow 'STP' 'ST2P' or 'ST3P' as well, for compatibility with ANI-D. - Store ANI2 (ANI INFO) digits in the CALLERID(ANI2) channel variable. - For calls with an ANI failure, No. 1 Crossbar switches will send forward a single-digit failure code, with no calling number digits and no ST pulse to terminate the spill. I've made the ANI timeout configurable so to reduce dead air time on calls with ANI fail. - ANI info digits configurable. Modern digital switches will send 2 digits, but ANI-B sends only a single info digit. This caused the ANI reported by Asterisk to be misaligned. - Changed a confusing log message to be more informative. ASTERISK-29518 Change-Id: Ib7e27d987aee4ed9bc3663c57ef413e21b404256	4 years ago
Tzafrir Cohen	6301531416	chan_dahdi: Configurable dialed digit timeouts Analog phones dial overlap dialing and it is chan_dahdi's job to read the numbers. It has three timeout constants that this commit converts to channel-level configuration options: * firstdigit_timeout: Default time (ms) to detect first digit * interdigit_timeout: Default time (ms) to detect following digits * matchdigit_timeout: Default time (ms) to wait in case of ambiguous match. This happens when the dialed digits match a number in the current context but are also the prefix of another number. Change-Id: Ib728fa900a4f6ae56d1ed810aba61b6593fb7213	8 years ago
Sean Bright	fd0ca1c3f9	Remove as much trailing whitespace as possible. Change-Id: I873c1c6d00f447269bd841494459efccdd2c19c0	8 years ago
Tzafrir Cohen	0646b48ece	chan_dahdi: remove by_name support Support for referring to DAHDI channels by logical names was added in (FIXME: when? Asterisk 11? 1.8?) and was intended to be part of support of refering to channels by name. While technically usable, it has never been properly supported in dahdi-tools, as using it would require many changes at the Asterisk level. Instead logical mapping was added at the kernel level. Thus it seems that refering to DAHDI channels by name is not really used by anyone, and therefore should probably be removed. Change-Id: I7d50bbfd9d957586f5cd06570244ef87bd54b485	9 years ago
Richard Mudgett	4aaa27e532	Sample configs: Eliminate false multiline comment block starts. Change-Id: Ie627def9604ae30abd80754f9e6f09874825aec6	9 years ago
Richard Mudgett	0d1744e132	chan_dahdi: Add faxdetect_timeout option. The new option allows the channel driver's faxdetect option to timeout on a call after the specified number of seconds into a call. The new feature is disabled if the timeout is set to zero. The option is disabled by default. * Don't clear dsp_features after passing them to the dsp code in my_pri_ss7_open_media(). We should still remember them especially for the new faxdetect_timeout option. ASTERISK-26214 Reported by: Richard Mudgett Change-Id: Ieffd3fe788788d56282844774365546dce8ac810	9 years ago
Richard Mudgett	7103b374ef	chan_dahdi: Improve force_restart_unavailable_chans option description. ASTERISK-25034 Reported by: Richard Mudgett Change-Id: I1ff8f02124d2f4abd632a050da52c64285bb7f30	11 years ago
Richard Mudgett	03c51cf525	chan_dahdi: Add the chan_dahdi.conf force_restart_unavailable_chans option. Some telco switches occasionally ignore ISDN RESTART requests. The fix for ASTERISK-19608 added an escape clause for B channels in the restarting state if the telco ignores a RESTART request. If the telco fails to acknowledge the RESTART then Asterisk will assume the telco acknowledged the RESTART on the second call attempt requesting the B channel by the telco. The escape clause is good for dealing with RESTART requests in general but it does cause the next call for the restarting B channel to be rejected if the telco insists the call must go on that B channel. chan_dahdi doesn't really need to issue a RESTART request in response to receiving a cause 44 (Requested channel not available) code. Sending the RESTART in such a situation is not required (nor prohibited) by the standards. I think chan_dahdi does this for historical reasons to deal with buggy peers to get channels unstuck in a similar fashion as the chan_dahdi.conf resetinterval option. * Add the chan_dahdi.conf force_restart_unavailable_chans compatability option that when disabled will prevent chan_dahdi from trying to RESTART the channel in response to a cause 44 code. ASTERISK-25034 #close Reported by: Richard Mudgett Change-Id: Ib8b17a438799920f4a2038826ff99a1884042f65	11 years ago
Matthew Jordan	fc0fecb476	configs: Move sample config files into a subdirectory of configs This moves all samples configs from configs/ to configs/samples. This allows for additional sets of sample configuration files to be added in the future. Review: https://reviewboard.asterisk.org/r/3804/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418870 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago

25 Commits (144f04d733a49fde1692deaaa55f88406b608bc5)