912 Commits (1106e8fd0f831c79eb2a7cf079739561da11d6ef)

Author	SHA1	Message	Date
Matthew Jordan	1106e8fd0f	main/stasis: Allow subscriptions to use a threadpool for message delivery ... Prior to this patch, all Stasis subscriptions would receive a dedicated thread for servicing published messages. In contrast, prior to r400178 (see review https://reviewboard.asterisk.org/r/2881/), the subscriptions shared a thread pool. It was discovered during some initial work on Stasis that, for a low subscription count with high message throughput, the threadpool was not as performant as simply having a dedicated thread per subscriber. For situations where a subscriber receives a substantial number of messages and is always present, the model of having a dedicated thread per subscriber makes sense. While we still have plenty of subscriptions that would follow this model, e.g., AMI, CDRs, CEL, etc., there are plenty that also fall into the following two categories: * Large number of subscriptions, specifically those tied to endpoints/peers. * Low number of messages. Some subscriptions exist specifically to coordinate a single message - the subscription is created, a message is published, the delivery is synchronized, and the subscription is destroyed. In both of the latter two cases, creating a dedicated thread is wasteful (and in the case of a large number of peers/endpoints, harmful). In those cases, having shared delivery threads is far more performant. This patch adds the ability of a subscriber to Stasis to choose whether or not their messages are dispatched on a dedicated thread or on a threadpool. The threadpool is configurable through stasis.conf. Review: https://reviewboard.asterisk.org/r/4193 ASTERISK-24533 #close Reported by: xrobau Tested by: xrobau ........ Merged revisions 428681 from http://svn.asterisk.org/svn/asterisk/branches/12 ........ Merged revisions 428687 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428688 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	7f8b7ace72	res_pjsip_sdp_rtp: Add support for optimistic SRTP. ... Optimistic SRTP is the ability to enable SRTP but not have it be a fatal requirement. If SRTP can be used it will be, if not it won't be. This gives you a better chance of using it without having your sessions fail when it can't be. Encrypt all the things! Review: https://reviewboard.asterisk.org/r/3992/ ........ Merged revisions 428222 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428224 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Mark Michelson	2e750db120	Allow for transferer to retry when dialing an invalid extension. ... This allows for a configurable number of attempts for a transferer to dial an extension to transfer the call to. For Asterisk 13, the default values are such that upgrading between versions will not cause a behaivour change. For trunk, though, the defaults will be changed to be more user-friendly. Review: https://reviewboard.asterisk.org/r/4167 ........ Merged revisions 428145 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428146 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	d0523b4b3c	chan_sip: Add support for setting DTLS configuration in the general section. ... Configuration of DTLS in the general section will be applied to any users or peers. If configuration exists at their level it overrides the general section values. ASTERISK-24128 #close Reported by: Michael K. patches: dtls_default_settings.patch submitted by Michael K. (license 6621) Review: https://reviewboard.asterisk.org/r/3867/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427950 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	d159885e50	res_pjsip_outbound_registration: Add virtual line support. ... Virtual line support establishes a relationship between messages related to an outbound registration and a local endpoint. This is accomplished by attaching a parameter to the Contact of the outbound registration and looking for it on any received requests. If the parameter exists and can be matched to an outbound registration the configured endpoint is associated with the request. Review: https://reviewboard.asterisk.org/r/2964/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427165 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	33f0251b6c	res_pjsip: Add disable_tcp_switch option. ... When a packet exceeds the MTU, pjproject will switch from UDP to TCP. In some circumstances (on some networks), this can cause some issues with messages not getting sent to the correct destination - and can also cause connections to get dropped due to quirks in pjproject deciding to terminate TCP connections with no messages. While fixing the routing/messaging issues is important, having a configuration option in Asterisk that tells pjproject to not switch over to TCP would be useful. That way, if some glitch is discovered on some other network/site, we can at least disable the behavior until a fix is put into place. AFS-197 #close Review: https://reviewboard.asterisk.org/r/4137/ ........ Merged revisions 427129 from http://svn.asterisk.org/svn/asterisk/branches/12 ........ Merged revisions 427130 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427137 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	b9aeff9580	chan_pjsip: Update CHANGES file to include 'moh_passthrough' setting ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427113 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	7144c739e9	res_pjsip: Add 'user_eq_phone' option to add a 'user=phone' parameter when applicable. ... This change adds a configuration option which adds a 'user=phone' parameter if the user portion of the request URI or the From URI is determined to be a number. Review: https://reviewboard.asterisk.org/r/4073/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425804 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	24ded9d9eb	res_pjsip: Fix XML typo and update CHANGES. ... ASTERISK-24199 ........ Merged revisions 424528 from http://svn.asterisk.org/svn/asterisk/branches/12 ........ Merged revisions 424529 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424530 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Walter Doekes	d172d84fe1	musiconhold: Add preferchannelclass=no option to prefer app class. ... The new option 'preferchannelclass' is added to musiconhold.conf. If yes (the default) the CHANNEL(musicclass) is preferred when choosing the hold music. If it is no, the class suggested by the application that calls the MoH (e.g. the Queue() app) gets preferred (new behaviour). This way you set a different hold-music from the Queue-music by setting both the CHANNEL(musicclass) and the queue-context musicclass. ASTERISK-24276 #close Reported by: Kristian Høgh Patches: app_override_channel_moh.patch uploaded by Kristian Høgh (License #6639) Review: https://reviewboard.asterisk.org/r/4010/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423893 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Walter Doekes	9c1f34c7e9	musiconhold: Add sort=randstart, and deprecate old stuff. ... - adds sort=randstart (next to sort=, sort=random, sort=alpha) - combines duplicate moh option parsing code into a single function - adds deprecationwarnings for application=r to sort randomly - adds deprecationwarnings for random=yes to sort randomly - removes invisible code that was supposed to stay until 1.8 The sort=randstart works like sort=alpha, except we start at a random position. Review: https://reviewboard.asterisk.org/r/3991/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423065 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	a47873168a	Update CHANGES for CHANNEL(onhold). ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422885 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Paul Belanger	ef28cc0d43	chan_sip.c: Add 'rtpbindaddr' setting ... Users now have the ability to bind the rtpengine instance to a specific IP address. For example, you want chan_sip (call control) on eth0 but rtp (media) on eth1. ASTERISK-24280 #close Reported by: Paul Belanger Tested by: Paul Belanger Review: https://reviewboard.asterisk.org/r/3952/ Patches: rtpengine.diff uploaded by Paul Belanger git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422241 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	ba5d5da60b	Improve call forwarding reporting, especially with regards to ARI. ... This patch addresses a few issues: 1) The order of Dial events have been changed when performing a call forward. The order has now been altered to 1) Dial begins dialing channel A. 2) When A forwards the call to B, we issue the dial end event to channel A, indicating the dial is being canceled due to a forward to B. 3) When the call to channel B occurs, we then issue a new dial begin to channel B. 2) Call forwards are now reported on the calling channel, not the peer channel. 3) AMI DialEnd events have been altered to display the extension the call is being forwarded to when relevant. 4) You can now get the values of channel variables for channels that are not currently in the Stasis application. This brings the retrieval of channel variables more in line with the rest of channel read operations since they may be performed on channels not in Stasis. ASTERISK-24134 #close Reported by Matt Jordan ASTERISK-24138 #close Reported by Matt Jordan Patches: forward-shenanigans.diff uploaded by Matt Jordan (License #6283) Review: https://reviewboard.asterisk.org/r/3899 ........ Merged revisions 420794 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421310 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	add46fd27c	app_queue: Add RealTime support for queue rules ... This patch gives the optional ability to keep queue rules in RealTime. It is important to note that with this patch: (a) Queue rules in RealTime are only examined on module load/reload (b) Queue rules are loaded both from the queuerules.conf file as well as the RealTime backend To inform app_queue to examine RealTime for queue rules, a new setting has been added to queuerules.conf's general section "realtime_rules". RealTime queue rules will only be used when this setting is set to "yes". The schema for the database table supports a rule_name, time, min_penalty, and max_penalty columns. min_penalty and max_penalty can be relative, if a '-' or '+' literal is provided. Otherwise, the penalties are treated as constants. For example: rule_name, time, min_penalty, max_penalty 'default', '10', '20', '30' 'test2', '20', '30', '55' 'test2', '25', '-11', '+1111' 'test2', '400', '112', '333' 'test3', '0', '4564', '46546' 'test_rule', '40', '15', '50' which would result in : Rule: default - After 10 seconds, adjust QUEUE_MAX_PENALTY to 30 and adjust QUEUE_MIN_PENALTY to 20 Rule: test2 - After 20 seconds, adjust QUEUE_MAX_PENALTY to 55 and adjust QUEUE_MIN_PENALTY to 30 - After 25 seconds, adjust QUEUE_MAX_PENALTY by 1111 and adjust QUEUE_MIN_PENALTY by -11 - After 400 seconds, adjust QUEUE_MAX_PENALTY to 333 and adjust QUEUE_MIN_PENALTY to 112 Rule: test3 - After 0 seconds, adjust QUEUE_MAX_PENALTY to 46546 and adjust QUEUE_MIN_PENALTY to 4564 Rule: test_rule - After 40 seconds, adjust QUEUE_MAX_PENALTY to 50 and adjust QUEUE_MIN_PENALTY to 15 If you use RealTime, the queue rules will be always reloaded on a module reload, even if the underlying file did not change. With the option disabled, the rules will only be reloaded if the file was modified. Review: https://reviewboard.asterisk.org/r/3607/ ASTERISK-23823 #close Reported by: Michael K patches: app_queue.c_realtime_trunk.patch uploaded by Michael K (License 6621) ........ Merged revisions 420624 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420625 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	f7bb772804	Update CHANGES file ... ........ Merged revisions 420609 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420610 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Jason Parker	5ce4ad8031	app_voicemail: Add the ability to specify multiple email addresses. ... ASTERISK-24045 Reported by: Jacob Barber Review: https://reviewboard.asterisk.org/r/3833/ ........ Merged revisions 420577 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420578 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	47bf7efc4d	Multiple revisions 420089-420090,420097 ... ........ r420089 | mjordan | 2014-08-05 15:10:52 -0500 (Tue, 05 Aug 2014) | 72 lines ARI: Add channel technology agnostic out of call text messaging This patch adds the ability to send and receive text messages from various technology stacks in Asterisk through ARI. This includes chan_sip (sip), res_pjsip_messaging (pjsip), and res_xmpp (xmpp). Messages are sent using the endpoints resource, and can be sent directly through that resource, or to a particular endpoint. For example, the following would send the message "Hello there" to PJSIP endpoint alice with a display URI of sip:asterisk@mycooldomain.org: ari/endpoints/sendMessage?to=pjsip:alice&from=sip:asterisk@mycooldomain.org&body=Hello+There This is equivalent to the following as well: ari/endpoints/PJSIP/alice/sendMessage?from=sip:asterisk@mycooldomain.org&body=Hello+There Both forms are available for message technologies that allow for arbitrary destinations, such as chan_sip. Inbound messages can now be received over ARI as well. An ARI application that subscribes to endpoints will receive messages from those endpoints: { "type": "TextMessageReceived", "timestamp": "2014-07-12T22:53:13.494-0500", "endpoint": { "technology": "PJSIP", "resource": "alice", "state": "online", "channel_ids": [] }, "message": { "from": "\"alice\" <sip:alice@127.0.0.1>", "to": "pjsip:asterisk@127.0.0.1", "body": "Watson, come here.", "variables": [] }, "application": "testsuite" } The above was made possible due to some rather major changes in the message core. This includes (but is not limited to): - Users of the message API can now register message handlers. A handler has two callbacks: one to determine if the handler has a destination for the message, and another to handle it. - All dialplan functionality of handling a message was moved into a message handler provided by the message API. - Messages can now have the technology/endpoint associated with them. Various other properties are also now more easily accessible. - A number of ao2 containers that weren't really needed were replaced with vectors. Iteration over ao2_containers is expensive and pointless when the lifetime of things is well defined and the number of things is very small. res_stasis now has a new file that makes up its structure, messaging. The messaging functionality implements a message handler, and passes received messages that match an interested endpoint over to the app for processing. Note that inadvertently while testing this, I reproduced ASTERISK-23969. res_pjsip_messaging was incorrectly parsing out the 'to' field, such that arbitrary SIP URIs mangled the endpoint lookup. This patch includes the fix for that as well. Review: https://reviewboard.asterisk.org/r/3726 ASTERISK-23692 #close Reported by: Matt Jordan ASTERISK-23969 #close Reported by: Andrew Nagy ........ r420090 | mjordan | 2014-08-05 15:16:37 -0500 (Tue, 05 Aug 2014) | 2 lines Remove automerge properties :-( ........ r420097 | mjordan | 2014-08-05 16:36:25 -0500 (Tue, 05 Aug 2014) | 2 lines test_message: Fix strict-aliasing compilation issue ........ Merged revisions 420089-420090,420097 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420098 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Mark Michelson	94b21f94d3	Add ContactStatusDetail to PJSIPShowEndpoint AMI output. ... Now when running PJSIPShowEndpoint, you will receive a ContactStatusDetail for each bound contact that Asterisk is qualifying. This information includes the URI of the contact, current reachability, and roundtrip time. AFS-91 #close Reported by Mark Michelson Review: https://reviewboard.asterisk.org/r/3797 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419888 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Jonathan Rose	b744adb8aa	PJSIP: Send Notify AMI and CLI commands can now send to URI instead of endpoint ... Review: https://reviewboard.asterisk.org/r/3817/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419851 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	bbeaeea1a3	res_hep_rtcp: Add module that sends RTCP information to a Homer Server ... This patch adds a new module to Asterisk, res_hep_rtcp. The module subscribes to the RTCP topics in Stasis and receives RTCP information back from the message bus. It encodes into HEPv3 packets and sends the information to the res_hep module for transmission. Using this, someone with a Homer server can get live call quality monitoring for all RTP-based channels in their Asterisk 12+ systems. In addition, there were a few bugs in the RTP engine, res_rtp_asterisk, and chan_pjsip that were uncovered by the tests written for the Asterisk Test Suite. This patch fixes the following: 1) chan_pjsip failed to set its channel unique ids on its RTP instance on outbound calls. It now does this in the appropriate location, in the serialized call callback. 2) The rtp_engine was overflowing some values when packed into JSON. Specifically, some longs and unsigned ints can't be be packed into integer values, for obvious reasons. Since libjansson only supports integers, floats, strings, booleans, and objects, we print these values into strings. 3) res_rtp_asterisk had a few problems: (a) it would emit a source IP address of 0.0.0.0 if bound to that IP address. We now use ast_find_ourip to get a better IP address, and properly marshal the result into an ast_strdupa'd string. (b) Reports can be generated with no report bodies. In particular, this occurs when a sender is transmitting information to a receiver (who will send no RTP back to the sender). As such, the sender has no report body for what it received. We now properly handle this case, and the sender will emit SR reports with no body. Likewise, if we receive an RTCP packet with no report body, we will still generate the appropriate events. ASTERISK-24119 #close ........ Merged revisions 419823 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419825 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	355dc3d2ad	Multiple revisions 419565-419566 ... ........ r419565 | mjordan | 2014-07-25 09:41:23 -0500 (Fri, 25 Jul 2014) | 21 lines ARI: report duration values in LiveRecording objects This patch adds three new fields to the LiveRecording model: - total_duration: the total length of the live recording - talking_duration: optional. The duration of talking energy that was detected while the recording was made. - silence_duration: optional. The duration of silence that was detected while the recording was made. These values are reported in the RecordingFinished ARI event. When a DSP is enabled on the channel during the recording - which occurs when the recording is created with max_silence_seconds (indicating that the user actually cares about how much silence is in the file), we will report the talking_duration and silence_duration in addition to the total_duration. Review: https://reviewboard.asterisk.org/r/3770/ ASTERISK-24037 #close Reported by: Samuel Galarneau ........ r419566 | mjordan | 2014-07-25 09:46:15 -0500 (Fri, 25 Jul 2014) | 1 line Update CHANGES for r419565 ........ Merged revisions 419565-419566 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419567 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	a2ce95d9d2	accountcode: Slightly change accountcode propagation. ... The previous behavior was to simply set the accountcode of an outgoing channel to the accountcode of the channel initiating the call. It was done this way a long time ago to allow the accountcode set on the SIP/100 channel to be propagated to a local channel so the dialplan execution on the Local;2 channel would have the SIP/100 accountcode available. SIP/100 -> Local;1/Local;2 -> SIP/200 Propagating the SIP/100 accountcode to the local channels is very useful. Without any dialplan manipulation, all channels in this call would have the same accountcode. Using dialplan, you can set a different accountcode on the SIP/200 channel either by setting the accountcode on the Local;2 channel or by the Dial application's b(pre-dial), M(macro) or U(gosub) options, or by the FollowMe application's b(pre-dial) option, or by the Queue application's macro or gosub options. Before Asterisk v12, the altered accountcode on SIP/200 will remain until the local channels optimize out and the accountcode would change to the SIP/100 accountcode. Asterisk v1.8 attempted to add peeraccount support but ultimately had to punt on the support. The peeraccount support was rendered useless because of how the CDR code needed to unconditionally force the caller's accountcode onto the peer channel's accountcode. The CEL events were thus intentionally made to always use the channel's accountcode as the peeraccount value. With the arrival of Asterisk v12, the situation has improved somewhat so peeraccount support can be made to work. Using the indicated example, the the accountcode values become as follows when the peeraccount is set on SIP/100 before calling SIP/200: SIP/100 ---> Local;1 ---- Local;2 ---> SIP/200 acct: 100 \/ acct: 200 \/ acct: 100 \/ acct: 200 peer: 200 /\ peer: 100 /\ peer: 200 /\ peer: 100 If a channel already has an accountcode it can only change by the following explicit user actions: 1) A channel originate method that can specify an accountcode to use. 2) The calling channel propagating its non-empty peeraccount or its non-empty accountcode if the peeraccount was empty to the outgoing channel's accountcode before initiating the dial. e.g., Dial and FollowMe. The exception to this propagation method is Queue. Queue will only propagate peeraccounts this way only if the outgoing channel does not have an accountcode. 3) Dialplan using CHANNEL(accountcode). 4) Dialplan using CHANNEL(peeraccount) on the other end of a local channel pair. If a channel does not have an accountcode it can get one from the following places: 1) The channel driver's configuration at channel creation. 2) Explicit user action as already indicated. 3) Entering a basic or stasis-mixing bridge from a peer channel's peeraccount value. You can specify the accountcode for an outgoing channel by setting the CHANNEL(peeraccount) before using the Dial, FollowMe, and Queue applications. Queue adds the wrinkle that it will not overwrite an existing accountcode on the outgoing channel with the calling channels values. Accountcode and peeraccount values propagate to an outgoing channel before dialing. Accountcodes also propagate when channels enter or leave a basic or stasis-mixing bridge. The peeraccount value only makes sense for mixing bridges with two channels; it is meaningless otherwise. * Made peeraccount functional by changing accountcode propagation as described above. * Fixed CEL extracting the wrong ie value for the peeraccount. This was done intentionally in Asterisk v1.8 when that version had to punt on peeraccount. * Fixed a few places dealing with accountcodes that were reading from channels without the lock held. AFS-65 #close Review: https://reviewboard.asterisk.org/r/3601/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419520 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Michael L. Young	f613fc24fb	core/bridge_channel: Substitute Variables In Features Application Map ... Say you wanted to include variables in an application map and have those variables substituted and passed along to the application being executed; currently this does not happen. This patch adds this ability to pass channel variable values to an application before being executed. ASTERISK-22608 #close Reported by: Michael L. Young patches: features_substitute_arguments_v2.diff uploaded by Michael L. Young (license 5026) Review: https://reviewboard.asterisk.org/r/3819/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419252 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Michael L. Young	20cb961b3e	apps/app_mixmonitor: Add Options To Play Beep At Start Or Stop ... We have a new periodic beep feature but sometimes a user needs some sort of feedback, without the need to have a periodic beep during the recording, to let them know that MixMonitor started recording or ended the recording. The use case where this patch is being used is when using Dynamic Features to start and end MixMonitor. This patch adds an option to play a beep when MixMonitor starts and an option to play a beep when MixMonitor ends. ASTERISK-24051 #close Reported by: Michael L. Young patches: mixmonitor-play-beep-start-stop.diff uploaded by Michael L. Young (license 5026) Review: https://reviewboard.asterisk.org/r/3820/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419238 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	b299052e20	ari: Add a copy operation for stored recordings ... This patch adds a new operation for stored recordings, copy. It takes an existing stored recording and makes a copy of it in the same directory or a relative directory under the stored recording directory. /ari/recordings/stored/{recordingName}/copy?destinationRecordingName={copy_name} This is particularly useful for voicemail-esque applications, which may need to copy or move recordings around a directory structure. Review: https://reviewboard.asterisk.org/r/3768/ ASTERISK-24036 #close Reported by: Sam Galarneau Tested by: Sam Galarneau ........ Merged revisions 419021 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419022 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Jonathan Rose	af4cd65143	Channels: Masquerades to automatically move frame/audio hooks ... Whenever possible, audiohooks and framehooks will now be copied over to the channel that the masquerading channel gets cloned into. This should occur for all audiohooks and most framehooks. As a result, in Asterisk 12.5 and up, the AUDIOHOOK_INHERIT function is now deprecated and its behavior is essentially the new default for all audiohooks, plus some additional audiohooks/framehooks. Review: https://reviewboard.asterisk.org/r/3721/ ........ Merged revisions 418914 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418936 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Jonathan Rose	5c988cc4e6	res_fax: Provide AMI equivalents for fax CLI commands ... Specifically the following equivalents were created: fax show session -> FAXSession fax show sessions -> FAXSessions fax show stats -> FAXStats Review: https://reviewboard.asterisk.org/r/3666/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418911 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	fd94fea599	res_pjsip: Support setting a default accountcode on endpoints ... Most channel drivers let you specify a default accountcode to be set on channels associated with a particular peer/endpoint/object. Prior to this patch, chan_pjsip/res_pjsip did not support such a setting. This patch adds a new setting to the res_pjsip endpoint object, 'accountcode'. When a channel is created that is associated with an endpoint with this value set, the channel will automatically have its accountcode property set to the value configured for the endpoint. Review: https://reviewboard.asterisk.org/r/3724/ ASTERISK-24000 #close Reported by: Matt Jordan ........ Merged revisions 418756 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418757 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	03e9c598e5	cel_pgsql, cdr_pgsql, res_config_pgsql: Add PostgreSQL application_name support ... This patch adds support for the PostgreSQL application_name connection setting. When the appropriate PostgreSQL module's configuration is set with an application name, the name will be passed to PostgreSQL on connection and displayed in the database's pg_stat_activity view, as well as in CSV logs. This aids in managing which applications/servers are connected to a PostgreSQL database, as well as tracing the activity of those connections. Review: https://reviewboard.asterisk.org/r/3591 ASTERISK-23737 #close Reported by: Gergely Domodi patches: pgsql_application_name.patch uploaded by Gergely Domodi (License 6610) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418755 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	97834718c2	Remove many deprecated modules ... Billing records are fair, To get paid is quite bright, You should really use ODBC; Good-bye cdr_sqlite. Microsoft did once push H.323, Hell, we all remember NetMeeting. But try to compile chan_h323 now And you will take quite a beating. The XMPP and SIP war was fierce, And in the distant fray Was birthed res_jabber/chan_jingle; But neither to stay. For everyone did care and chase what Google professed. "Free Internet Calling" was what devotees cried, But Google did change the specs so often That the developers were happy the day chan_gtalk died. And then there was that odd application Dedicated to the Polish tongue. app_saycountpl was subsumed by Say; One could say its bell was rung. To read and parse a file from the dialplan You could (I guess) use an application. app_readfile did fill that purpose, but I think A function is perhaps better in its creation. Barging is rude, I'm not sure why we do it. Inwardly, the caller will probably sigh. But if you really must do it, Don't use app_dahdibarge, use ChanSpy. We all despise the sound of tinny robots It makes our queues so cold. To control such an abomination It's better to not use Wait/SetMusicOnHold. It's often nice to know properties of a channel It makes our calls right We have a nice function called CHANNEL And so SIPCHANINFO is sent off into the night. And now things get odd; Apparently one could delimit with a colon Properties from the SIPPEER function! Commas are in; all others are done. Finally, a word on pipes and commas. We're sorry. We can't say it enough. But those compatibility options in asterisk.conf; To maintain them forever was just too tough. This patch removes: * cdr_sqlite * chan_gtalk * chan_jingle * chan_h323 * res_jabber * app_saycountpl * app_readfile * app_dahdibarge It removes the following applications/functions: * WaitMusicOnHold * SetMusicOnHold * SIPCHANINFO It removes the colon delimiter from the SIPPEER function. Finally, it also removes all compatibility options that were configurable from asterisk.conf, as these all applied to compatibility with Asterisk 1.4 systems. Review: https://reviewboard.asterisk.org/r/3698/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418019 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Jonathan Rose	bc4b236d71	chan_dahdi: Add AMI commands for controlling PRI debugging output ... Adds the following AMI commands: PRIDebugSet - Set PRI debug levels for a specific span PRIDebugFileSet - Set the file used for PRI debug message output PRIDebugFileUnset - Disables file output for PRI debug messages Review: https://reviewboard.asterisk.org/r/3681/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417916 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Jonathan Rose	04a9123309	pbx_config: Add manager actions to add/remove extensions ... Adds two new manager commands to pbx_config - DialplanExtensionAdd and DialplanExtensionRemove which allow manager users to create and delete extensions respectively. Review: https://reviewboard.asterisk.org/r/3650/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417910 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	eaee92198d	main/tcptls: Add support for Perfect Forward Secrecy ... This patch enables Perfect Forward Secrecy (PFS) in Asterisk's core TLS API. Modules that wish to enable PFS should consider the following: - Ephemeral ECDH (ECDHE) is enabled by default. To disable it, do not specify a ECDHE cipher suite in a module's configuration, for example: tlscipher=AES128-SHA:DES-CBC3-SHA - Ephemeral DH (DHE) is disabled by default. To enable it, add DH parameters into the private key file, i.e., tlsprivatekey. For an example, see the default dh2048.pem at http://www.opensource.apple.com/source/OpenSSL098/OpenSSL098-35.1/src/apps/dh2048.pem?txt - Because clients expect the server to prefer PFS, and because OpenSSL sorts its cipher suites by bit strength, (see "openssl ciphers -v DEFAULT") consider re-ordering your cipher suites in the conf file. For example: tlscipher=AES128+kEECDH:AES128+kEDH:3DES+kEDH:AES128-SHA:DES-CBC3-SHA:-ADH:-AECDH will use PFS when offered by the client. Clients which do not offer PFS fall-back to AES-128 (or even 3DES as recommend by RFC 3261). Review: https://reviewboard.asterisk.org/r/3647/ ASTERISK-23905 #close Reported by: Alexander Traud patches: tlsPFS_for_HEAD.patch uploaded by Alexander Traud (License 6520) tlsPFS.patch uploaded by Alexander Traud (License 6520) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417803 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	af90afd90c	app_voicemail, say: Add support for Japanese Language ... This patch adds support for the Japanese language to both the say family of applications, as well as for VoiceMail and VoiceMailMain. A new pack of language sounds will be released at the same time as the next major version of Asterisk to support the new language features. The language features can be enabled using a language code of 'ja'. Review: https://reviewboard.asterisk.org/r/3477 ASTERISK-23324 #close Reported by: Kevin McCoy patches: app_voicemail.c.20140226.jb.patch uploaded by Kevin McCoy (License 6586) say.c.20140226.jb.patch uploaded by Kevin McCoy (License 6586) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417591 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kinsey Moore	1337daf88a	CHANGES: Add missing changes ... Add missing CHANGES changes from r417361 and r417383. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417423 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	22e62ac6f6	app_jack: Support audio with a sampling rate higher than 8kHz ... This patch enables the jack-audiohook to cope with dynamic sampling rates from and to Asterisk. Information from the channel is taken to derive the channel's sampling rate, suiting SLINxx format and frame->datalen. There are stil a few limitations after this patch: * Required information is taken from the channel during initialization as the audiohook does not provide this information. Audiohook.internal_sampl_rate(...) is set later, but no callback is available to inform app_jack. * Frame.datalen is computed using "rate / 50" assuming a ptime of 20ms. There is no internal API available to determine datalen for a SLINxx. * Ringbuffer size is now dynamic depending on the value of frame.datalen (see above) and the number of frames, which are in RINGBUFFER_FRAME_CAPACITY, that need to fit. Review: https://reviewboard.asterisk.org/r/3618 Note that the patch being committed here is based on the patch posted on ASTERISK-23836. However, Matthis Schmieder also provided a patch to enable this functionality, and that patch is noted below. ASTERISK-20696 #close Reported by: Matthis Schmieder patches: app_jack.patch uploaded by Matthis Schmieder (License 6445) ASTERISK-23836 #close Reported by: Dennis Guse patches: patch-app_jack.c uploaded by Dennis Guse (License 6513) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417360 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Jonathan Rose	e087ae0c02	Logger: Add manager command 'LoggerRotate' to rotate logger ... Part of a series of AMI command equivalents to existing CLI commands Review: https://reviewboard.asterisk.org/r/3651/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@416848 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	0c896d8b9b	chan_dahdi: Adds support for major update to libss7. ... * SS7 support now requires libss7 v2.0 or later. The new libss7 is not backwards compatible. * Added SS7 support for connected line and redirecting. * Most SS7 CLI commands are reworked as well as new SS7 commands added. See online CLI help. * Added several SS7 config option parameters described in chan_dahdi.conf.sample. * ISUP timer support reworked and now requires explicit configuration. See ss7.timers.sample. Special thanks to Kaloyan Kovachev for his support and persistence in getting the original patch by adomjan updated and ready for release. SS7-27 #close Reported by: adomjan git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@416416 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	53968c00b3	TALK_DETECT: A channel function that raises events when talking is detected ... This patch adds a new channel function TALK_DETECT that, when set on a channel, causes events indicating the start/stop of talking on a channel to be emitted to both AMI and ARI clients. The function allows setting both the silence threshold (the length of silence after which we decide no one is talking) as well as the talking threshold (the amount of energy that counts as talking). Parameters can be updated on a channel after talk detection has been enabled, and talk detection can be removed at any time. The events raised by the function use a nomenclature similar to existing AMI/ARI events. For AMI: ChannelTalkingStart/ChannelTalkingStop For ARI: ChannelTalkingStarted/ChannelTalkingFinished Review: https://reviewboard.asterisk.org/r/3563/ #ASTERISK-23786 #close Reported by: Matt Jordan ........ Merged revisions 414934 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@414935 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	a5aea0cca0	app_agent_pool: Return to dialplan if the agent fails to ack the call. ... Improvements to the agent pool functionality. * AgentRequest no longer hangs up the caller if the agent fails to connect with the caller. It now continues in the dialplan. * AgentRequest returns AGENT_STATUS set to NOT_CONNECTED if the agent failed to connect with the call. Most likely because the agent did not acknowledge the call in time or got disconnected. * The agent alerting play file configured by the agent.conf custom_beep option can now be disabled by setting the option to an empty string. The agent is effectively alerted to a call presence when MOH stops. * Fixed bridge reference leak when the agent connects with a caller. ASTERISK-23499 #close Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/3551/ ........ Merged revisions 414747 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@414748 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Scott Griepentrog	cf21644d6a	ARI: Add ability to raise arbitrary User Events ... User events can now be generated from ARI. Events can be signalled with arbitrary json variables, and include one or more of channel, bridge, or endpoint snapshots. An application must be specified which will receive the event message (other applications can subscribe to it). The message will also be delivered via AMI provided a channel is attached. Dialplan generated user event messages are still transmitted via the channel, and will only be received by a stasis application they are attached to or if the channel is subscribed to. This change also introduces the multi object blob mechanism used to send multiple snapshot types in a single message. The dialplan app UserEvent was also changed to use multi object blob, and a new stasis message type created to handle them. ASTERISK-22697 #close Review: https://reviewboard.asterisk.org/r/3494/ ........ Merged revisions 414405 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@414406 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	57372e61d2	Parking: Add 'AnnounceChannel' argument to manager action 'Park' ... (closes ASTERISK-23397) Reported by: Denis Review: https://reviewboard.asterisk.org/r/3446/ ........ Merged revisions 413196 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413197 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Mark Michelson	7dd64ff993	Add DeviceStateChanged and PresenceStateChanged AMI events. ... These events are controlled by two new modules, res_manager_devicestate and res_manager_presencestate. Review: https://reviewboard.asterisk.org/r/3417 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413060 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Igor Goncharovskiy	d3433771c9	Introducing changes proposed to chan_unistim driver: ...	12 years ago
Jonathan Rose	86c68bc437	chan_sip: trust_id_outbound CHANGES message improvement ... (closes issue AST-1301) (closes issue ASTERISK-19465) Reported by: Krzysztof Chmielewski ........ Merged revisions 412821 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 412822 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 412823 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412824 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	ae21162a69	chan_sip: Add sendrpid trust options ... In r411189, some behavior was changed which made sendrpid behavior act in a more trusting manner by sending full user data for peers set with private caller presence in P-Asserted-Identity headers. Since this changed long time expected behaviors, we decided to pull that patch when that was pointed out by the community. Instead, this patch provides a trust_id_outbound setting which will expose the data per RFC-3325 if set to 'yes' and simply not send the PAI/RPID headers at all if set to 'no'. By default trust_id_outbound will be set to 'legacy' which will preserve the behavior prior to these patches. Extra special thanks to Walter Doekes for providing advice and feedback. (closes issue AST-1301) (closes issue ASTERISK-19465) Reported by: Krzysztof Chmielewski Review: https://reviewboard.asterisk.org/r/3447/ ........ Merged revisions 412744 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 412746 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 412747 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412759 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	b9d7dfcc62	ARI: Make bridges/{bridgeID}/play queue sound files ... Previously multiple play actions against a bridge at one time would cause the sounds to play simultaneously on the bridge. Now if a sound is already playing, the play action will queue playback to occur after the completion of other sounds currently on the queue. (closes issue ASTERISK-22677) Reported by: John Bigelow Review: https://reviewboard.asterisk.org/r/3379/ ........ Merged revisions 412639 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412641 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	a8742e327f	ARI: Add tones playback resource ... Adds a tones URI type to the playback resource. The tone can be specified by name (from indications.conf) or by a tone pattern. In addition, tonezone can be specified in the URI (by appending ;tonezone=<zone>). Tones must be stopped manually in order for a stasis control to move on from playback of the tone. Tones may be paused, resumed, restarted, and stopped. They may not be rewound or fast forwarded (tones can't be controlled in a way that lets you skip around from note to note and pausing and resuming will also restart the tone from the beginning). Tests are currently in development for this feature (https://reviewboard.asterisk.org/r/3428/). (closes issue ASTERISK-23433) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/3427/ ........ Merged revisions 412535 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412536 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	7d26eefce4	chan_sip: Add SIPURIPHONECONTEXT channel variable for Request TEL URIs ... This patch is a continuation of https://reviewboard.asterisk.org/r/3349/, committed in r412303. It resolves a finding oej had that the phone-context be available in a channel variable separate from SIPDOMAIN. This patch adds that variable as SIPURIPHONECONTEXT. It also allows a local number (or global number specified in the TEL URI) to be used to look up as a peer. (issue ASTERISK-17179) Review: https://reviewboard.asterisk.org/r/3349/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412467 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago