3905 Commits (10ef644d6691a02cb380b07ec56cc2acf44f040d)

Author	SHA1	Message	Date
zuul	10ef644d66	Merge "pjproject cli: Add object count after object lists"	9 years ago
zuul	e5897c92ff	Merge "res_config_sqlite3: Properly create missing columns when necessary"	9 years ago
George Joseph	ffa7d69766	pjproject cli: Add object count after object lists ... When listing a container, we now print the number of objects in the container at the end of the list. Change-Id: I791cbc3ee9da9a2af9adc655164b5d32953df812	9 years ago
Sean Bright	44abe214d2	res_config_sqlite3: Fix crash when loading with invalid config ... When ast_config_load() fails with CONFIG_STATUS_FILEINVALID, it has already destroyed the ast_config struct for us. Trying to do it again results in a crash. Change-Id: If6a5c0ca718ad428e01a1fb25beb209a9ac18bc6	9 years ago
Joshua Colp	b1edbc4c83	Merge "res_pjsip_pubsub: Correctly implement persisted subscriptions"	9 years ago
zuul	3ed09e2822	Merge "pjsip_distributor.c: Fix off-nominal tdata ref leak."	9 years ago
Sean Bright	30aaeec5a1	res_config_sqlite3: Properly create missing columns when necessary ... There were two specific issues resolved here: 1) The code that iterated over the required fields (via ast_realtime_require) was broken for the RQ_INTEGER1 field type. Iteration would stop when the first RQ_INTEGER1 (0) field was encountered. 2) sqlite3_changes() was used to try and count the number of rows returned by a SELECT statement. sqlite3_changes() only counts affected rows, so this was always returning the value from the most recent data modification statement. We now separate read-only queries from data modification queries and count rows appropriately in both cases. ASTERISK-23457 #close Reported by: Scott Griepentrog Change-Id: I91ed20494efc3fcfbc2a96ac7646999a49814884	9 years ago
George Joseph	4bdf5d329f	res_pjsip_pubsub: Correctly implement persisted subscriptions ... This patch fixes 2 original issues and more that those 2 exposed. * When we send a NOTIFY, and the client either doesn't respond or responds with a non OK, pjproject only calls our pubsub_on_evsub_state callback, no others. Since pubsub_on_evsub_state (which does the sub_tree cleanup) does not expect to be called back without the other callbacks being called first, it just returns leaving the sub_tree orphaned. Now pubsub_on_evsub_state checks the event for PJSIP_EVENT_TSX_STATE which is what pjproject will set to tell us that it was the transaction that timed out or failed and not the subscription itself timing our or being terminated by the client. If is TSX_STATE, pubsub_on_evsub_state now does the proper cleanup regardless of the state of the subscription. * When a client renews a subscription, we don't update the persisted subscription with the new expires timestamp. This causes subscription_persistence_recreate to prune the subscription if/when asterisk restarts. Now, pubsub_on_rx_refresh calls subscription_persistence_update to apply the new expires timestamp. This exposed other issues however... * When creating a dialog from rdata (which sub_persistence_recreate does from the packet buffer) there must NOT be a tag on the To header (which there will be when a client refreshes a subscription). If there is one, pjsip_dlg_create_uas will fail. To address this, subscription_persistence_update now accepts a flag that indicates that the original packet buffer must not be updated. New subscribes don't set the flag and renews do. This makes sure that when the rdata is recreated on asterisk startup, it's done from the original subscribe packet which won't have the tag on To. * When creating a dialog from rdata, we were setting the dialog's remote (SUBSCRIBE) cseq to be the same as the local (NOTIFY) cseq. When the client tried to resubscribe after a restart with the correct cseq, we'd reject the request with an Invalid CSeq error. * The acts of creating a dialog and evsub by themselves when recreating a subscription does NOT restart pjproject's subscription timer. The result was that even if we did correctly recreate the subscription, we never removed it if the client happened to go away or send a non-OK response to a NOTIFY. However, there is no pjproject function exposed to just set the timer on an evsub that wasn't created by an incoming subscribe request. To address this, we create our own timer using ast_sip_schedule_task. This timer is used only for re-establishing subscriptions after a restart. An earlier approach was to add support for setting pjproject's timer (via a pjproject patch) and while that patch is still included here, we don't use that call at the moment. While addressing these issues, additional debugging was added and some existing messages made more useful. A few formatting changes were also made to 'pjsip show scheduled tasks' to make displaying the subscription timers a little more friendly. ASTERISK-26696 ASTERISK-26756 Change-Id: I8c605fc1e3923f466a74db087d5ab6f90abce68e	9 years ago
Sean Bright	11886dea82	res_rtp_asterisk: Use PJ_ICE_MAX_CAND instead of hard-coding 16 ... pjsip limits the total number of ICE candidates to PJ_ICE_MAX_CAND, which is a compile-time constant. Instead of hard-coding 16 when we enumerate local interfaces, use PJ_ICE_MAX_CAND so that we can potentially collect more interfaces if the compile time options are changed. Tangentially related to ASTERISK~24464 Change-Id: I1b85509e39e33b1fed63c86261fc229ba14bbabd	9 years ago
zuul	182c737353	Merge "cli: Fix various CLI documentation and completion issues"	9 years ago
zuul	09fcfb26fa	Merge "stream: Add media stream topology definition and API"	9 years ago
Joshua Colp	3e6c15085a	Merge "res_pjsip.c: Fix inconsistency between warning and action."	9 years ago
Sean Bright	3f94373778	cli: Fix various CLI documentation and completion issues ... * app_minivm: Use built-in completion facilities to complete optional arguments. * app_voicemail: Use built-in completion facilities to complete optional arguments. * app_confbridge: Add missing colons after 'Usage' text. * chan_alsa: Use built-in completion facilities to complete optional arguments. * chan_sip: Use built-in completion facilities to complete optional arguments. Add completions for 'load' for 'sip show user', 'sip show peer', and 'sip qualify peer.' * chan_skinny: Correct and extend completions for 'skinny reset' and 'skinny show line.' * func_odbc: Correct completions for 'odbc read' and 'odbc write' * main/astmm: Use built-in completion facilities to complete arguments for 'memory' commands. * main/bridge: Correct completions for 'bridge kick.' * main/ccss: Use built-in completion facilities to complete arguments for 'cc cancel' command. * main/cli: Add 'all' completion for 'channel request hangup.' Correct completions for 'core set debug channel.' Correct completions for 'core show calls.' * main/pbx_app: Remove redundant completions for 'core show applications.' * main/pbx_hangup_handler: Remove unused completions for 'core show hanguphandlers all.' * res_sorcery_memory_cache: Add completion for 'reload' argument of 'sorcery memory cache stale' and properly implement. Change-Id: Iee58c7392f6fec34ad9d596109117af87697bbca	9 years ago
George Joseph	8b72ec312b	stream: Add media stream topology definition and API ... This change adds the media stream topology definition and API for accessing and using it. Some refactoring of the stream was also done. ASTERISK-26786 Change-Id: Ic930232d24d5ad66dcabc14e9b359e0ff8e7f568	9 years ago
Richard Mudgett	07abb39d6a	res_pjsip.c: Fix inconsistency between warning and action. ... The original return value corresponded to AST_SIP_AUTHENTICATION_CHALLENGE but we have no authenticator registered to create the challenge. Change-Id: I62368180d774b497411b80fbaabd0c80841f8512	9 years ago
Richard Mudgett	ce810a892b	pjsip_distributor.c: Fix off-nominal tdata ref leak. ... Change-Id: I571f371d0956a8039b197b4dbd8af6b18843598d	9 years ago
Sean Bright	0910773077	manager: Restore Originate failure behavior from Asterisk 11 ... In Asterisk 11, if the 'Originate' AMI command failed to connect the provided Channel while in extension mode, a 'failed' extension would be looked up and run. This was, I believe, unintentionally removed in 51b6c49. This patch restores that behavior. This also adds an enum for the various 'synchronous' modes in an attempt to make them meaningful. ASTERISK-26115 #close Reported by: Nasir Iqbal Change-Id: I8afbd06725e99610e02adb529137d4800c05345d	9 years ago
Mark Michelson	46147a8f30	Revert "Update qualifies when AOR configuration changes." ... This reverts commit 6492e91392. The change in question was intended to prevent the need to reload in order to update qualifies on contacts when an AOR changes. However, this ended up causing a deadlock instead. Change-Id: I1a835c90a5bb65b6dc3a1e94cddc12a4afc3d71e	9 years ago
Joshua Colp	b79cc62057	res_stasis_device_state: Protect the adding/removing of subscriptions. ... The adding and removing of device state subscriptions did not protect fully against simultaneous manipulation. In particular the subscribe case allowed a small window where two subscriptions could be added for the same device state instead of just one. This change makes the code hold the subscriptions lock for the entirety of each operation to ensure that two are not occurring at the same time. ASTERISK-26770 Change-Id: I3e7f8eb9d09de440c9024d2dd52029f6f20e725b	9 years ago
Richard Mudgett	b47cf1a7d6	res_pjsip: Fix some off nominal tdata leaks. ... Change-Id: I243a4be5e7fbfe604923764969c4ee04eee89b9d	9 years ago
Joshua Colp	e63635b578	Merge "Update qualifies when AOR configuration changes."	9 years ago
Joshua Colp	69fba55838	Merge "res_agi: Prevent an AGI from eating frames it should not. (Re-do)"	9 years ago
George Joseph	0478c1f76a	Merge "Add reload options to CLI/AMI stale object commands."	9 years ago
Richard Mudgett	97c308471d	res_agi: Prevent an AGI from eating frames it should not. (Re-do) ... A dialplan intercept routine is equivalent to an interrupt routine. As such, the routine must be done quickly and you do not have access to the media stream. These restrictions are necessary because the media stream is the responsibility of some other code and interfering with or delaying that processing is bad. A possible future dialplan processing architecture change may allow the interception routine to run in a different thread from the main thread handling the media and remove the execution time restriction. * Made res_agi.c:run_agi() running an AGI in an interception routine run in DeadAGI mode. No touchy channel frames. ASTERISK-25951 ASTERISK-26343 ASTERISK-26716 Change-Id: I638f147ca7a7f2590d7194a8ef4090eb191e4e43	9 years ago
zuul	5504dd3cdd	Merge "res_pjsip: Handle invocation of callback on outgoing request when error occurs."	9 years ago
Richard Mudgett	7d9b50a7b2	res_resolver_unbound.c: Fix frequent ref leak caught by excessive ref trap. ... ASTERISK-26765 Change-Id: I27eb97df7f8d7e624b0b9a61c0fcee4718c86d8d	9 years ago
Mark Michelson	bbed75c3ba	Update qualifies when AOR configuration changes. ... Prior to this change, qualifies would only update in the following cases: * A reload of res_pjsip.so was issued. * A dynamic contact was re-registered after its AOR's qualify_frequency had been changed This does not work well if you are using realtime for your AORs. You can update your database to have a new qualify_frequency, but the permanent contacts on that AOR will not have their qualifies updated. And the dynamic contacts on that AOR will not have their qualifies updated until the next registration, which could be a long time. This change seeks to fix this problem by making it so that whenever AOR configuration is applied, the contacts pertaining to that AOR have their qualifies updated. Additions from this patch: * AOR sorcery objects now have an apply handler that calls into a newly added function in the OPTIONS code. This causes all contacts associated with that AOR to re-schedule qualifies. * When it is time to qualify a contact, the OPTIONS code checks to see if the AOR can still be retrieved. If not, then qualification is canceled on the contact. Alterations from this patch: * The registrar code no longer updates contact's qualify_frequence and qualify_timeout. There is no point to this since those values already get updated when the AOR changes. * Reloading res_pjsip.so no longer calls the OPTIONS initialization function. Reloading res_pjsip.so results in re-loading AORs, which results in re-scheduling qualifies. Change-Id: I2e7c3316da28f389c45954f24c4e9389abac1121	9 years ago
Joshua Colp	aeea634bc0	res_pjsip: Handle invocation of callback on outgoing request when error occurs. ... There are some error cases in PJSIP when sending a request that will result in the callback for the request being invoked. The code did not handle this case and assumed on every error case that the callback was not invoked. The code has been changed to check whether the callback has been invoked and if so to absorb the error and treat it as a success. ASTERISK-26679 ASTERISK-26699 Change-Id: I563982ba204da5aa1428989a11c06dd9087fea91	9 years ago
Sean Bright	7a16524a83	res_rtp_asterisk: Swap byte-order when sending signed linear ... Before Asterisk 13, signed linear was converted into network byte order by a smoother before being sent over the network. We restore this behavior by forcing the creation of a smoother when slinear is in use and setting the appropriate flags so that the byte order conversion is always done. ASTERISK-24858 #close Reported-by: Frankie Chin Change-Id: I868449617d1a7819578f218c8c6b2111ad84f5a9	9 years ago
George Joseph	ef4deb8ecd	debug_utilities: Add ast_logescalator ... The escalator works by creating a set of startup commands in cli.conf that set up logger channels and issue the debug commands for the subsystems specified. If asterisk is running when it is executed, the same commands will be issued to the running instance. The original cli.conf is saved before any changes are made and can be restored by executing '$prog --reset'. The log output will be stored in... $astlogdir/message.$uniqueid $astlogdir/debug.$uniqueid $astlogdir/dtmf.$uniqueid $astlogdir/fax.$uniqueid $astlogdir/security.$uniqueid $astlogdir/pjsip_history.$uniqueid $astlogdir/sip_history.$uniqueid Some minor tweaks were made to chan_sip, and res_pjsip_history so their history output could be send to a log channel as packets are captured. A minor tweak was also made to manager so events are output to verbose when "manager set debug on" is issued. Change-Id: I799f8e5013b86dc5282961b27383d134bf09e543	9 years ago
George Joseph	6f645a6d4e	Merge "media: Add experimental support for RTCP feedback."	9 years ago
zuul	08bc42201d	Merge "res_pjsip_endpoint_identifier_ip: Fix memory leak of hosts when resolving."	9 years ago
zuul	10631bb209	Merge "PJPROJECT logging: Fix detection of max supported log level."	9 years ago
George Joseph	0ad6d2b3cf	Merge "ari: Implement 'debug all' and request/response logging"	9 years ago
George Joseph	071aa069e6	Merge "res_musiconhold.c: Fix format ref leak when parsing MOH config class."	9 years ago
Joshua Colp	7fa3de7ae9	res_pjsip_endpoint_identifier_ip: Fix memory leak of hosts when resolving. ... This change adds a missing unreference of the hostname when resolving and also cleans up the iterator. ASTERISK-26735 Change-Id: Ic012ebaf3d89e714eec340b7b0c5e63c66af857a	9 years ago
Mark Michelson	d32bd63860	Add reload options to CLI/AMI stale object commands. ... Marking an object as stale in a memory cache is supposed to prime the cache so that the next time the item is retrieved, the stale item is deleted from the cache and a background task is run to re-populate the cache with a fresh version of the object. The problem is, there are some object types out there for which there is no natural reason that they would be retrieved from the backend with any regularity. Outbound PJSIP registrations are a good example of this. At startup, they are read, and an object-specific state is created that refers to the initially-retrieved object for all time. Adding the "reload" option to the CLI/AMI commands gives the cache the opportunity to manually re-retrieve the object from the backend, both storing the new object in the cache and applying the new object's configuration to the module that uses that object. Change-Id: Ieb1fe7270ceed491f057ec5cbf0e097bde96c5c8	9 years ago
Richard Mudgett	20aed30d9a	T.140: Fix format ref and memory leaks. ... * channel.c:ast_sendtext(): Fix T.140 SendText memory leak. * format_compatibility.c: T.140 RED and T.140 were swapped. * res_rtp_asterisk.c:rtp_red_init(): Fix ast_format_t140_red ref leak. * res_rtp_asterisk.c:rtp_red_init(): Fix data race after starting periodic scheduled red_write(). * res_rtp_asterisk.c: Some other minor misc tweaks. Change-Id: Ifa27a2e0f8a966b1cf628607c86fc4374b0b88cb	9 years ago
zuul	b21ab3f1cd	Merge "stasis_bridge.c: Fix off-nominal stasis control ref leak."	9 years ago
George Joseph	bda60f09d3	Merge "res_pjsip_endpoint_identifier_ip: Ensure error defaults to 0."	9 years ago
George Joseph	f114b7b8c9	Merge "res_pjsip_pubsub.c: Implement "pjsip show subscriptions" commands."	9 years ago
Joshua Colp	ee2b0f2eef	res_pjsip_endpoint_identifier_ip: Ensure error defaults to 0. ... When configuring a match using a netmask the error variable was not defaulting to 0. For some people this would cause the code to think an error occurred when adding the match when in reality it added perfectly fine. ASTERISK-26693 Change-Id: I850c250813742bddde65c84e739093c9e01dfe56	9 years ago
Richard Mudgett	e922979d49	stasis_bridge.c: Fix off-nominal stasis control ref leak. ... Change-Id: Ib17218343a6596832060180e19386da9df150ac8	9 years ago
Richard Mudgett	56854f22d2	res_musiconhold.c: Fix format ref leak when parsing MOH config class. ... Change-Id: Ica8e8e2ce7604c2c61ec55bef07dc675361d2ea5	9 years ago
Joshua Colp	f517c015e2	Merge "Free endpoint ACLs when destroying PJSIP endpoints."	9 years ago
Richard Mudgett	6f3e8c8e01	PJPROJECT logging: Fix detection of max supported log level. ... The mechanism used for detecting the maximum log level compiled into the linked pjproject did not work. The API call simply stores the requested level into an integer and does no range checking. Asterisk was assuming that there was range checking and limited the new value to the allowable range. To get the actual maximum log level compiled into the linked pjproject we need to get and save off the initial set log level from pjproject. This is the maximum log level supported. * Get and save off the initial log level setting before altering it to the desired level on startup. This has to be done by a macro rather than calling a core function to avoid incorrectly linking pjproject. * Split the initial log level warning messages to warn if the linked pjproject cannot support the requested startup level and if it is too low to get the pjproject buildopts for "pjproject show buildopts". * Adjust the CLI "pjproject set log level" to check the saved max log level and to generate normal output messages instead of a warning message. ASTERISK-26743 #close Change-Id: I40aa76653e2a1dece66c3f8734594b4f0471cfb4	9 years ago
George Joseph	a5d8761721	Merge "res_pjsip_endpoint_identifier_ip: Read settings before resolving."	9 years ago
Richard Mudgett	0ea3c371c5	res_pjsip_pubsub.c: Implement "pjsip show subscriptions" commands. ... ASTERISK-23828 #close Change-Id: Ifb8a3b61f447aedc58a8e6b36a810f7566018567	9 years ago
Mark Michelson	4bfeda6ee4	Free endpoint ACLs when destroying PJSIP endpoints. ... If endpoint ACLs were specified, they were not being freed when endpoints were destroyed. On systems with realtime endpoints, this could add up quickly since each DB lookup would allocate the ACL without freeing it. ASTERISK-26731 #close Reported by Ustinov Artem Change-Id: Ie1f8bf5b7a0de628c975beba01e69c56893331ad	9 years ago
zuul	697fde39ac	Merge "res_pjsip_pubsub.c: Fix incorrect message string wrapping."	9 years ago