3781 Commits (0d85f1868d3b35f8c7582d519f3640a7cd2d4ce6)

Author	SHA1	Message	Date
Mark Michelson	28926d1c81	AGI: Only defer frames when in an interception routine. ... AGI recently was modified to defer important frames. This was because when AGI was used in a connected line interception routine, the resulting connected line frame would end up getting discarded by the AGI. However, this caused bad behavior in other cases. Specifically, during a transfer, if someone attempted to manually set the Caller ID on a channel in an AGI, the deferred connected line frame would end up overwriting what had been manually set in the AGI. Since the initial issue was specific to interception routines, this change removes the manual frame deferral from AGI and instead uses the new frame deferral API in interception routines. ASTERISK-26343 #close Reported by Morton Tryfoss Change-Id: Iab7d39436d0ee99bfe32ad55ef91e9bd88db4208	9 years ago
Joshua Colp	61af0e6704	Merge "res_http_websocket: Increase the buffer size for non-LOW_MEMORY systems"	9 years ago
Joshua Colp	3019dfd49f	Merge "res_stasis: Don't unsubscribe from a NULL bridge."	9 years ago
Joshua Colp	1ab943a425	Merge "stasis_recording/stored: remove calls to deprecated readdir_r function."	9 years ago
Joshua Colp	d30415bfa1	res_stasis: Don't unsubscribe from a NULL bridge. ... A NULL bridge has special meaning in res_stasis for unsubscribing. It means that a subscription to ALL bridges should be removed. This should not be done as part of the normal subscription management in the res_stasis channel loop. ASTERISK-26468 Change-Id: I6d5bea8246dd13a22ef86b736aefbf2a39c15af0	9 years ago
Matt Jordan	367d4903cc	res_http_websocket: Increase the buffer size for non-LOW_MEMORY systems ... Not surprisingly, using Respoke (and possibly other systems) it is possible to blow past the 16k limit for a WebSocket packet size. This patch bumps it up to 32k, which, at least for Respoke, is sufficient. For now. Because 32k is laughable on a LOW_MEMORY system (as is 16k, for that matter), this patch adds a LOW_MEMORY directive that sets the buffer to 8k for systems who have asked for their reduced memory availability to be considered. Change-Id: Id235902537091b58608196844dc4b045e383cd2e	9 years ago
Matt Jordan	7a449b6819	res_stasis: Set a video source mode on Stasis created bridges ... When a bridge is created via ARI (through res_stasis), no video source mode is set by default. As a result, any endpoint sending video media won't ever see any video reflected back to it. This patch defaults a bridge to a 'follow the talker' video mode. Further work can be done to add routes that allow for the video mode to be controlled through the /bridges resource. Change-Id: I7e9d530a5d7a97a4524a9ee4e468e1a6b3443866	9 years ago
Kevin Harwell	70d5f90e3d	stasis_recording/stored: remove calls to deprecated readdir_r function. ... The readdir_r function has been deprecated and should no longer be used. This patch removes the readdir_r dependency (replaced it with readdir) and also moves the directory search code to a more centralized spot (file.c) Also removed a strict dependency on the dirent structure's d_type field as it is not portable. The code now checks to see if the value is available. If so, it tries to use it, but defaults back to using the stats function if necessary. Lastly, for most implementations of readdir it *should* be thread-safe to make concurrent calls to it as long as different directory streams are specified. glibc falls into this category. However, since it is possible that there exist some implementations that are not safe, locking has been added for those other than glibc. ASTERISK-26412 ASTERISK-26509 #close Change-Id: Id8f54689b1e2873e82a09d0d0d2faf41964e80ba	9 years ago
Joshua Colp	a380bba1e3	Merge "res_pjsip_sdp_rtp: Limit number of formats to defined maximum."	9 years ago
Joshua Colp	d94e2250c2	Merge "res_pjsip_outbound_publish: Fix crash when publishing device state."	9 years ago
Joshua Colp	6233e146c6	res_pjsip_sdp_rtp: Limit number of formats to defined maximum. ... The res_pjsip_sdp_rtp module did not restrict the number of formats added to a media stream in the SDP to the defined limit. If allow=all was used with additional loaded codecs this could result in the next media stream being overwritten some. This change restricts the module to limit it to the defined maximum and also increases the maximum in our bundled pjproject. ASTERISK-26541 #close Change-Id: I0dc5f59d3891246cafa2f3df5ec406f088559ee8	9 years ago
Matt Jordan	c30d677333	res/stasis: Add CLI commands for displaying/debugging ARI apps ... This patch adds three new CLI commands: - ari show apps: list the registered ARI applications - ari show app: show detailed information about an ARI application - ari set debug: dump events being sent to an ARI application Note that while these CLI commands live in the res_stasis module, we use the 'ari' family for these commands. This was done as most users of Asterisk aren't aware of the semantic differences between ARI and res_stasis, and some 'ari' CLI commands already exist. ASTERISK-26488 #close Change-Id: I51ad6ff0cabee0d69db06858c13f18b1c513c9f5	9 years ago
mkrokosz	9d8b9b6ca5	res_pjsip_outbound_publish: Fix crash when publishing device state. ... While publishing device state between multiple instances of Asterisk, a crash will sporadically occur under high CPS which looks to be a race condition operating on the publisher queue. ASTERISK-26506 Change-Id: I28da25d346deb358eff1d563485cabc433ce1ed6	9 years ago
zuul	0ec5abe592	Merge "Remove ASTERISK_REGISTER_FILE."	9 years ago
zuul	0fc942e7cd	Merge "res_pjsip_sdp_rtp: Fix address family of explicit media_address."	9 years ago
Joshua Colp	24d0907849	Merge "pjsip: Fix a few media bugs with reinvites and asymmetric payloads."	9 years ago
Corey Farrell	a6e5bae3ef	Remove ASTERISK_REGISTER_FILE. ... ASTERISK_REGISTER_FILE no longer has any purpose so this commit removes all traces of it. Previously exported symbols removed: * __ast_register_file * __ast_unregister_file * ast_complete_source_filename This also removes the mtx_prof static variable that was declared when MTX_PROFILE was enabled. This variable was only used in lock.c so it is now initialized in that file only. ASTERISK-26480 #close Change-Id: I1074af07d71f9e159c48ef36631aa432c86f9966	9 years ago
Joshua Colp	6993f3c9c3	res_pjsip_caller_id: Fix crash on session timers UPDATE on inbound calls. ... The res_pjsip_caller_id module wrongly assumed that a saved From header would always exist on sessions. This is true until an inbound call is received and a session timer causes an UPDATE to be sent. In this case there will be no saved From header and a crash will occur. This change makes it fall back to the From header of the outgoing request if no saved From header is present. ASTERISK-26307 #close Change-Id: Iccc3bc8d243b5ede9b81abf960292930c908d4fa	9 years ago
Joshua Colp	aed6c219a3	pjsip: Fix a few media bugs with reinvites and asymmetric payloads. ... When channel format changes occurred as a result of an RTP re-negotiation the bridge was not informed this had happened. As a result the bridge technology was not re-evaluated and the channel may have been in a bridge technology that was incompatible with its formats. The bridge is now unbridged and the technology re-evaluated when this occurs. The chan_pjsip module also allowed asymmetric codecs for sending and receiving. This did not work with all devices and caused one way audio problems. The default has been changed to NOT do this but to match the sending codec to the receiving codec. For users who want asymmetric codecs an option has been added, asymmetric_rtp_codec, which will return chan_pjsip to the previous behavior. The codecs returned by the chan_pjsip module when queried by the bridge_native_rtp module were also not reflective of the actual negotiated codecs. The nativeformats are now returned as they reflect the actual negotiated codecs. ASTERISK-26423 #close Change-Id: I6ec88c6e3912f52c334f1a26983ccb8f267020dc	9 years ago
Joshua Colp	7925f60cd9	res_pjsip_sdp_rtp: Fix address family of explicit media_address. ... When an explicit media_address is provided the address family in the SDP needs to be set to reflect it. ASTERISK-26309 Change-Id: Ib9350cc91c120eb2f96f0623d3907d12af67eb79	9 years ago
Joshua Colp	7c79b057dd	Merge "pjsip: Support dual stack automatically."	9 years ago
Joshua Colp	403c4f5833	pjsip: Support dual stack automatically. ... This change adds support for dual stack automatically. No configuration is required and the IP address and version in the SIP messages and SDP will be automatically changed based on the transport over which the message is being sent. RTP usage has also been changed to listen on both IPv4 and IPv6 simultaneously to allow media to flow, and to allow ICE support on both simultaneously. This also allows failover between IPv6 and IPv4 to work as expected. ASTERISK-26309 #close Change-Id: I235a421d8f9a326606d861b449fa6fe3a030572d	9 years ago
Mark Michelson	3bd76dd679	ARI: Add duplicate channel ID checking for channel creation. ... This is similar to what is done for origination, but for the 14 and up channel creation method. When attempting to create a channel, if a channel ID is specified and a channel already exists with that ID, then a 409 is returned. Change-Id: I77f9253278c6947939c418073b6b31065489187c	9 years ago
Mark Michelson	e459b8dadf	ARI: Detect duplicate channel IDs ... ARI and AMI allow for an explicit channel ID to be specified when originating channels. Unfortunately, there is nothing in place to prevent someone from using the same ID for multiple channels. Further complicating things, adding ID validation to channel allocation makes it impossible for ARI to discern why channel allocation failed, resulting in a vague error code being returned. The fix for this is to institute a new method for channel errors to be discerned. The method mirrors errno, in that when an error occurs, the caller can consult the channel errno value to determine what the error was. This initial iteration of the feature only introduces "unknown" and "channel ID exists" errors. However, it's possible to add more errors as needed. ARI uses this feature to determine why channel allocation failed and can return a 409 error during origination to show that a channel with the given ID already exists. ASTERISK-26421 Change-Id: Ibba7ae68842dab6df0c2e9c45559208bc89d3d06	9 years ago
Michael Walton	3e96d491d0	res_rtp_asterisk: Add ice_blacklist option ... Introduces ice_blacklist configuration in rtp.conf. Subnets listed in the form ice_blacklist = <subnet spec>, e.g. ice_blacklist = 192.168.1.0/255.255.255.0, are excluded from ICE host, srflx and relay discovery. This is useful for optimizing the ICE process where a system has multiple host address ranges and/or physical interfaces and certain of them are not expected to be used for RTP. Multiple ice_blacklist configuration lines may be used. If left unconfigured, all discovered host addresses are used, as per previous behavior. Documention in rtp.conf.sample. ASTERISK-26418 #close Change-Id: Ibee88f80d7693874fda1cceaef94a03bd86012c9	9 years ago
Joshua Colp	f31772ec20	ari: Update model validator based on addition of asterisk_id. ... ASTERISK-26470 Change-Id: I9c386f7a1c7d969161b28f189eb6298bbc5b7541	9 years ago
Matt Jordan	dd5129d84a	res/ari: Add the Asterisk EID field to outgoing events ... This patch adds the Asterisk EID field to all outgoing ARI events. Because this field should be added to all events as they are transmitted, it is appended to the JSON message just prior to it being handed off to the application message handler. This makes it somewhat resilient to both new events being added to ARI, as well as other potential event transport mechanisms. ASTERISK-26470 #close Change-Id: Ieff0ecc24464e83f3f44e9c3e7bd9a5d70b87a1d	9 years ago
Richard Mudgett	9c49b96374	Audit ast_json_pack() calls for needed UTF-8 checks. ... Added needed UTF-8 checks before constructing json objects in various files for strings obtained outside the system. In this case string values from a channel driver's peer and not from the user setting channel variables. * aoc.c: Fixed type mismatch in s_to_json() for time and granularity json object construction. ASTERISK-26466 Reported by: Richard Mudgett Change-Id: Iac2d867fa598daba5c5dbc619b5464625a7f2096	9 years ago
Torrey Searle	20c3dba39e	res_fax: Fix a tight race condition causing fax to crash in audio fallback ... When T.38 gets rejected and G711 failback occurs there is a period of time where neither AST_FAX_TECH_T38 nor AST_FAX_TECH_AUDIO is set, leading to a crash. Change-Id: Icc3f457b2292d48a9d7843dac0028347420cc982	9 years ago
zuul	3981bc2a54	Merge "res_calendar: Add support for fetching calendars when reloading"	9 years ago
Torrey Searle	cc269766b8	res_rtp_asterisk: Fix infinite DTMF issue when switching to P2P bridge ... If a bridge switched to P2P when a DTMF was in progress it was possible for the DTMF to continue being sent indefinitely. Change-Id: I7e2a3efe0d59d4b214ed50cd0b5d0317e2d92e29	9 years ago
Badalyan Vyacheslav	3ab7fae96b	res_pjsip_config_wizard: Memory leak in module_unload ... Fixed a memory leak. It removes only the first element. Added a useful feature in vector.h to remove all items under the CMP through a callback function / macro. ASTERISK-26453 #close Change-Id: I84508353463456d2495678f125738e20052da950	9 years ago
Ludovic Gasc (GMLudo)	9f62feca60	res_calendar: Add support for fetching calendars when reloading ... We use a lot res_calendar, we are very happy with that, especially because you use libical, the almost alone opensource library that supports really ical format with all types of recurrency. Nevertheless, some features are missed for our business use cases. This first patch adds a new option in calendar.conf: fetch_again_at_reload. Be my guest for a better name. If it's true, when you'll launch "module reload res_calendar.so", Asterisk will download again the calendar. The business use case is that we have a WebUI with a scheduler planner, we know when the calendars are modified. For now, we need to define 1 minute of timeout to have a chance that our user doesn't wait too long between the modification and the real test. But it generates a lot of useless HTTP traffic. ASTERISK-26422 #close Change-Id: I384b02ebfa42b142bbbd5b7221458c7f4dee7077	9 years ago
George Joseph	c7e4e035a2	Merge "codec_opus: Replace res_format_attr_opus with the one from codec_opus"	9 years ago
George Joseph	5cc3c6679f	codec_opus: Replace res_format_attr_opus with the one from codec_opus ... Preparation ASTERISK-26409 Change-Id: I9f20e7cce00c32464d9a180e81283d49d199d0a3 (cherry picked from commit 59f7662a93)	9 years ago
George Joseph	43901e9418	build_tools: Add ability to download variants to download_externals ... Some external packages have multiple variants that apply to different builds of asterisk. The DPMA for instance has a "bundled" variant that needs to be downloaded if asterisk was configured with --with-pjproject-bundled. There are 2 ways to specify variants: If you need the user to make the decision about which variant to download, simply create multiple menuselect "member" entries like so... <member name="res_digium_phone" displayname="..snipped.."> <support_level>external</support_level> <depend>xmlstarlet</depend> <depend>bash</depend> <defaultenabled>no</defaultenabled> </member> <member name="res_digium_phone-bundled" displayname="..snipped.."> <support_level>external</support_level> <depend>xmlstarlet</depend> <depend>bash</depend> <defaultenabled>no</defaultenabled> </member> Note that the second entry has "-<variant>" appended to the name. You can then use the existing menuselect facilities to restrict which members to enable or disable. Youy probably don't want the user to enable multiple at the same time. If you want to hide the details of the variants, the better way to do it is to create 1 member with "variant" elements. <member name="res_digium_phone" displayname="..snipped.."> <support_level>external</support_level> <depend>xmlstarlet</depend> <depend>bash</depend> <defaultenabled>no</defaultenabled> <member_data> <downloader> <variants> <variant tag="bundled" condition='[[ "$PJPROJECT_BUNDLED" = "yes" ]]'/> </variants> </downloader> </member_data> </member> The condition must be a bash expression suitable for use with an "if" statement. Any environment variable can be used plus those available in makeopts. In this case, if asterisk was configured with --with-pjproject-bundled the bundled variant will be automatically downloaded. Otherwise the normal version will be downloaded. Change-Id: I4de23e06d4492b0a65e105c8369966547d0faa3e	9 years ago
Joshua Colp	077caf566e	res_odbc: Make pooling option deprecation notice more useful. ... This changes the notice for the deprecation of the old pooling options to point to the new option for doing pooling. This gives a clearer direction as to what to look into. ASTERISK-26389 #close Change-Id: I2ca9cdfdcd75aec170a7db9d5ff69a4cd25b7c10	9 years ago
zuul	0df2373434	Merge "res_pjsip_multihomed: Change Contact port to listening port."	9 years ago
Richard Mudgett	2820b13393	res_config_odbc.c: Fix buffer size limitation creating invalid SQL. ... Creating ODBC SQL queries resulted in queries too large to fit into the supplied buffer. The resulting truncated buffer contained an invalid SQL query. * Made SQL query generation code use a thread storage buffer that can increase in size as needed. * Fixed bad multi-line warning messages. ASTERISK-26263 #close Reported by: Jeppe Ryskov Larsen Change-Id: I23f3cdd43c2dac80bed3ded4dd77d18cb17f21ae	9 years ago
Joshua Colp	9d894ee0a1	res_pjsip_multihomed: Change Contact port to listening port. ... The res_pjsip_multihomed module determines what interface and transport a request is going out on and updates the SIP message accordingly with the address information. This currently incorrectly updates the Contact header for connectionful protocols to the ephemeral connection port, instead of the bound address for the listening socket which can actually accept the connection back. If the remote side attempts to connect back on the epehemeral port it will fail. This change makes it so the port is updated to the bound port on connectionful protocols and is maintained on UDP (as there can be multiple of those). ASTERISK-26374 #close Change-Id: I50f8dab65b9f75117d73ba5f6bbcf6c9871854ab	9 years ago
zuul	95cf4f8d31	Merge "res_pjsip_transport_management: Convert time in log message to seconds."	9 years ago
Joshua Colp	89764f7ae9	rtp: Preserve timestamps on video frames. ... Currently when receiving video over RTP we store only a calculated samples on the frame. When starting the video it can take some time for this calculation to actually yield a value as it requires constant changing timestamps. As well if a video frame passes over multiple RTP packets this calculation will fail as the timestamp is the same as the previous RTP packet and the number of samples calculated will be 0. This change preserves the timestamp on the frame and allows it to pass through the core. When sending the video this timestamp is used instead of a new one being calculated. ASTERISK-26367 #close Change-Id: Iba8179fb5c14c9443aee4baf670d2185da3ecfbd	9 years ago
zuul	cbd6f7001e	Merge "res_pjsip: Add ignore_uri_user_options option."	9 years ago
Joshua Colp	5f54ac3a80	res_pjsip_transport_management: Convert time in log message to seconds. ... ASTERISK-26375 #close Change-Id: I46496af5cae41413e76d44d2068a7431279f09dc	9 years ago
zuul	87aa445559	Merge "res_pjsip: Don't assume a request will have any addresses."	9 years ago
zuul	8076e78d50	Merge "res_pjsip_messaging.c: Misc cleanups and fixes."	9 years ago
Joshua Colp	e3487b9360	res_pjsip: Don't assume a request will have any addresses. ... When performing DNS resolution the failover code present in res_pjsip currently assumes that a request will always have at least one viable address. In practice this is not true. A domain may be used that has no records. The code now checks that at least one address exists on the request which prevents looping. ASTERISK-26364 #close Change-Id: Ic0761b0264864acd85915c94d878a81624940f4c	9 years ago
Richard Mudgett	ba362822f3	res_pjsip: Add ignore_uri_user_options option. ... This implements the chan_sip legacy_useroption_parsing option but with a better name. * Made the caller-id number and redirecting number strings obtained from incoming SIP URI user fields always truncated at the first semicolon. People don't care about anything after the semicolon showing up on their displays even though the RFC allows the semicolon. ASTERISK-26316 #close Reported by: Kevin Harwell Change-Id: Ib42b0e940dd34d84c7b14bc2e90d1ba392624f62	9 years ago
zuul	9d54dd04bb	Merge "res/res_pjsip: Add preferred_codec_only config to pjsip endpoint."	9 years ago
Joshua Colp	901e612739	res_pjsip: Only invoke unidentified endpoint logic when unidentified. ... The code was incorrectly invoking the unidentified logic when an endpoint had actually been identified, causing log messages to be output. ASTERISK-26349 #close Change-Id: Id8104fc9e3d138d5e8b6f6977ecc08765fd17d4f	9 years ago