81 Commits (08d773532bdbef24c6785ab8c3c5144d6a10df80)

Author	SHA1	Message	Date
Jonathan Rose	85878c4dd8	Dial API: Add a dial option to indicate the dialed channel will replace dialer ... Adds an option to the dial API that marks an outgoing dial as replacing the dialing channel for the purpose of propagating accountcode. When it is used, AST_CHANNEL_REQUESTOR_REPLACEMENT is used instead of AST_CHANNEL_REQUESTOR_BRIDGE_PEER when setting accountcodes on the involved channels with ast_channel_req_accountcodes. Review: https://reviewboard.asterisk.org/r/3968/ ........ Merged revisions 422684 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422697 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	a2ce95d9d2	accountcode: Slightly change accountcode propagation. ... The previous behavior was to simply set the accountcode of an outgoing channel to the accountcode of the channel initiating the call. It was done this way a long time ago to allow the accountcode set on the SIP/100 channel to be propagated to a local channel so the dialplan execution on the Local;2 channel would have the SIP/100 accountcode available. SIP/100 -> Local;1/Local;2 -> SIP/200 Propagating the SIP/100 accountcode to the local channels is very useful. Without any dialplan manipulation, all channels in this call would have the same accountcode. Using dialplan, you can set a different accountcode on the SIP/200 channel either by setting the accountcode on the Local;2 channel or by the Dial application's b(pre-dial), M(macro) or U(gosub) options, or by the FollowMe application's b(pre-dial) option, or by the Queue application's macro or gosub options. Before Asterisk v12, the altered accountcode on SIP/200 will remain until the local channels optimize out and the accountcode would change to the SIP/100 accountcode. Asterisk v1.8 attempted to add peeraccount support but ultimately had to punt on the support. The peeraccount support was rendered useless because of how the CDR code needed to unconditionally force the caller's accountcode onto the peer channel's accountcode. The CEL events were thus intentionally made to always use the channel's accountcode as the peeraccount value. With the arrival of Asterisk v12, the situation has improved somewhat so peeraccount support can be made to work. Using the indicated example, the the accountcode values become as follows when the peeraccount is set on SIP/100 before calling SIP/200: SIP/100 ---> Local;1 ---- Local;2 ---> SIP/200 acct: 100 \/ acct: 200 \/ acct: 100 \/ acct: 200 peer: 200 /\ peer: 100 /\ peer: 200 /\ peer: 100 If a channel already has an accountcode it can only change by the following explicit user actions: 1) A channel originate method that can specify an accountcode to use. 2) The calling channel propagating its non-empty peeraccount or its non-empty accountcode if the peeraccount was empty to the outgoing channel's accountcode before initiating the dial. e.g., Dial and FollowMe. The exception to this propagation method is Queue. Queue will only propagate peeraccounts this way only if the outgoing channel does not have an accountcode. 3) Dialplan using CHANNEL(accountcode). 4) Dialplan using CHANNEL(peeraccount) on the other end of a local channel pair. If a channel does not have an accountcode it can get one from the following places: 1) The channel driver's configuration at channel creation. 2) Explicit user action as already indicated. 3) Entering a basic or stasis-mixing bridge from a peer channel's peeraccount value. You can specify the accountcode for an outgoing channel by setting the CHANNEL(peeraccount) before using the Dial, FollowMe, and Queue applications. Queue adds the wrinkle that it will not overwrite an existing accountcode on the outgoing channel with the calling channels values. Accountcode and peeraccount values propagate to an outgoing channel before dialing. Accountcodes also propagate when channels enter or leave a basic or stasis-mixing bridge. The peeraccount value only makes sense for mixing bridges with two channels; it is meaningless otherwise. * Made peeraccount functional by changing accountcode propagation as described above. * Fixed CEL extracting the wrong ie value for the peeraccount. This was done intentionally in Asterisk v1.8 when that version had to punt on peeraccount. * Fixed a few places dealing with accountcodes that were reading from channels without the lock held. AFS-65 #close Review: https://reviewboard.asterisk.org/r/3601/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419520 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kinsey Moore	878db87fc0	Dial API: Prevent crash on NULL cap ... This prevents a crash in the Dial API triggered by use of the Page() application where a format capability struct was used before checking whether it was NULL. ASTERISK-24074 #close git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419111 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	a2c912e997	media formats: re-architect handling of media for performance improvements ... In the old times media formats were represented using a bit field. This was fast but had a few limitations. 1. Asterisk was limited in how many formats it could handle. 2. Formats, being a bit field, could not include any attribute information. A format was strictly its type, e.g., "this is ulaw". This was changed in Asterisk 10 (see https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal for notes on that work) which led to the creation of the ast_format structure. This structure allowed Asterisk to handle attributes and bundle information with a format. Additionally, ast_format_cap was created to act as a container for multiple formats that, together, formed the capability of some entity. Another mechanism was added to allow logic to be registered which performed format attribute negotiation. Everywhere throughout the codebase Asterisk was changed to use this strategy. Unfortunately, in software, there is no free lunch. These new capabilities came at a cost. Performance analysis and profiling showed that we spend an inordinate amount of time comparing, copying, and generally manipulating formats and their related structures. Basic prototyping has shown that a reasonably large performance improvement could be made in this area. This patch is the result of that project, which overhauled the media format architecture and its usage in Asterisk to improve performance. Generally, the new philosophy for handling formats is as follows: * The ast_format structure is reference counted. This removed a large amount of the memory allocations and copying that was done in prior versions. * In order to prevent race conditions while keeping things performant, the ast_format structure is immutable by convention and lock-free. Violate this tenet at your peril! * Because formats are reference counted, codecs are also reference counted. The Asterisk core generally provides built-in codecs and caches the ast_format structures created to represent them. Generally, to prevent inordinate amounts of module reference bumping, codecs and formats can be added at run-time but cannot be removed. * All compatibility with the bit field representation of codecs/formats has been moved to a compatibility API. The primary user of this representation is chan_iax2, which must continue to maintain its bit-field usage of formats for interoperability concerns. * When a format is negotiated with attributes, or when a format cannot be represented by one of the cached formats, a new format object is created or cloned from an existing format. That format may have the same codec underlying it, but is a different format than a version of the format with different attributes or without attributes. * While formats are reference counted objects, the reference count maintained on the format should be manipulated with care. Formats are generally cached and will persist for the lifetime of Asterisk and do not explicitly need to have their lifetime modified. An exception to this is when the user of a format does not know where the format came from *and* the user may outlive the provider of the format. This occurs, for example, when a format is read from a channel: the channel may have a format with attributes (hence, non-cached) and the user of the format may last longer than the channel (if the reference to the channel is released prior to the format's reference). For more information on this work, see the API design notes: https://wiki.asterisk.org/wiki/display/AST/Media+Format+Rewrite Finally, this work was the culmination of a large number of developer's efforts. Extra thanks goes to Corey Farrell, who took on a large amount of the work in the Asterisk core, chan_sip, and was an invaluable resource in peer reviews throughout this project. There were a substantial number of patches contributed during this work; the following issues/patch names simply reflect some of the work (and will cause the release scripts to give attribution to the individuals who work on them). Reviews: https://reviewboard.asterisk.org/r/3814 https://reviewboard.asterisk.org/r/3808 https://reviewboard.asterisk.org/r/3805 https://reviewboard.asterisk.org/r/3803 https://reviewboard.asterisk.org/r/3801 https://reviewboard.asterisk.org/r/3798 https://reviewboard.asterisk.org/r/3800 https://reviewboard.asterisk.org/r/3794 https://reviewboard.asterisk.org/r/3793 https://reviewboard.asterisk.org/r/3792 https://reviewboard.asterisk.org/r/3791 https://reviewboard.asterisk.org/r/3790 https://reviewboard.asterisk.org/r/3789 https://reviewboard.asterisk.org/r/3788 https://reviewboard.asterisk.org/r/3787 https://reviewboard.asterisk.org/r/3786 https://reviewboard.asterisk.org/r/3784 https://reviewboard.asterisk.org/r/3783 https://reviewboard.asterisk.org/r/3778 https://reviewboard.asterisk.org/r/3774 https://reviewboard.asterisk.org/r/3775 https://reviewboard.asterisk.org/r/3772 https://reviewboard.asterisk.org/r/3761 https://reviewboard.asterisk.org/r/3754 https://reviewboard.asterisk.org/r/3753 https://reviewboard.asterisk.org/r/3751 https://reviewboard.asterisk.org/r/3750 https://reviewboard.asterisk.org/r/3748 https://reviewboard.asterisk.org/r/3747 https://reviewboard.asterisk.org/r/3746 https://reviewboard.asterisk.org/r/3742 https://reviewboard.asterisk.org/r/3740 https://reviewboard.asterisk.org/r/3739 https://reviewboard.asterisk.org/r/3738 https://reviewboard.asterisk.org/r/3737 https://reviewboard.asterisk.org/r/3736 https://reviewboard.asterisk.org/r/3734 https://reviewboard.asterisk.org/r/3722 https://reviewboard.asterisk.org/r/3713 https://reviewboard.asterisk.org/r/3703 https://reviewboard.asterisk.org/r/3689 https://reviewboard.asterisk.org/r/3687 https://reviewboard.asterisk.org/r/3674 https://reviewboard.asterisk.org/r/3671 https://reviewboard.asterisk.org/r/3667 https://reviewboard.asterisk.org/r/3665 https://reviewboard.asterisk.org/r/3625 https://reviewboard.asterisk.org/r/3602 https://reviewboard.asterisk.org/r/3519 https://reviewboard.asterisk.org/r/3518 https://reviewboard.asterisk.org/r/3516 https://reviewboard.asterisk.org/r/3515 https://reviewboard.asterisk.org/r/3512 https://reviewboard.asterisk.org/r/3506 https://reviewboard.asterisk.org/r/3413 https://reviewboard.asterisk.org/r/3410 https://reviewboard.asterisk.org/r/3387 https://reviewboard.asterisk.org/r/3388 https://reviewboard.asterisk.org/r/3389 https://reviewboard.asterisk.org/r/3390 https://reviewboard.asterisk.org/r/3321 https://reviewboard.asterisk.org/r/3320 https://reviewboard.asterisk.org/r/3319 https://reviewboard.asterisk.org/r/3318 https://reviewboard.asterisk.org/r/3266 https://reviewboard.asterisk.org/r/3265 https://reviewboard.asterisk.org/r/3234 https://reviewboard.asterisk.org/r/3178 ASTERISK-23114 #close Reported by: mjordan media_formats_translation_core.diff uploaded by kharwell (License 6464) rb3506.diff uploaded by mjordan (License 6283) media_format_app_file.diff uploaded by kharwell (License 6464) misc-2.diff uploaded by file (License 5000) chan_mild-3.diff uploaded by file (License 5000) chan_obscure.diff uploaded by file (License 5000) jingle.diff uploaded by file (License 5000) funcs.diff uploaded by file (License 5000) formats.diff uploaded by file (License 5000) core.diff uploaded by file (License 5000) bridges.diff uploaded by file (License 5000) mf-codecs-2.diff uploaded by file (License 5000) mf-app_fax.diff uploaded by file (License 5000) mf-apps-3.diff uploaded by file (License 5000) media-formats-3.diff uploaded by file (License 5000) ASTERISK-23715 rb3713.patch uploaded by coreyfarrell (License 5909) rb3689.patch uploaded by mjordan (License 6283) ASTERISK-23957 rb3722.patch uploaded by mjordan (License 6283) mf-attributes-3.diff uploaded by file (License 5000) ASTERISK-23958 Tested by: jrose rb3822.patch uploaded by coreyfarrell (License 5909) rb3800.patch uploaded by jrose (License 6182) chan_sip.diff uploaded by mjordan (License 6283) rb3747.patch uploaded by jrose (License 6182) ASTERISK-23959 #close Tested by: sgriepentrog, mjordan, coreyfarrell sip_cleanup.diff uploaded by opticron (License 6273) chan_sip_caps.diff uploaded by mjordan (License 6283) rb3751.patch uploaded by coreyfarrell (License 5909) chan_sip-3.diff uploaded by file (License 5000) ASTERISK-23960 #close Tested by: opticron direct_media.diff uploaded by opticron (License 6273) pjsip-direct-media.diff uploaded by file (License 5000) format_cap_remove.diff uploaded by opticron (License 6273) media_format_fixes.diff uploaded by opticron (License 6273) chan_pjsip-2.diff uploaded by file (License 5000) ASTERISK-23966 #close Tested by: rmudgett rb3803.patch uploaded by rmudgetti (License 5621) chan_dahdi.diff uploaded by file (License 5000) ASTERISK-24064 #close Tested by: coreyfarrell, mjordan, opticron, file, rmudgett, sgriepentrog, jrose rb3814.patch uploaded by rmudgett (License 5621) moh_cleanup.diff uploaded by opticron (License 6273) bridge_leak.diff uploaded by opticron (License 6273) translate.diff uploaded by file (License 5000) rb3795.patch uploaded by rmudgett (License 5621) tls_fix.diff uploaded by mjordan (License 6283) fax-mf-fix-2.diff uploaded by file (License 5000) rtp_transfer_stuff uploaded by mjordan (License 6283) rb3787.patch uploaded by rmudgett (License 5621) media-formats-explicit-translate-format-3.diff uploaded by file (License 5000) format_cache_case_fix.diff uploaded by opticron (License 6273) rb3774.patch uploaded by rmudgett (License 5621) rb3775.patch uploaded by rmudgett (License 5621) rtp_engine_fix.diff uploaded by opticron (License 6273) rtp_crash_fix.diff uploaded by opticron (License 6273) rb3753.patch uploaded by mjordan (License 6283) rb3750.patch uploaded by mjordan (License 6283) rb3748.patch uploaded by rmudgett (License 5621) media_format_fixes.diff uploaded by opticron (License 6273) rb3740.patch uploaded by mjordan (License 6283) rb3739.patch uploaded by mjordan (License 6283) rb3734.patch uploaded by mjordan (License 6283) rb3689.patch uploaded by mjordan (License 6283) rb3674.patch uploaded by coreyfarrell (License 5909) rb3671.patch uploaded by coreyfarrell (License 5909) rb3667.patch uploaded by coreyfarrell (License 5909) rb3665.patch uploaded by mjordan (License 6283) rb3625.patch uploaded by coreyfarrell (License 5909) rb3602.patch uploaded by coreyfarrell (License 5909) format_compatibility-2.diff uploaded by file (License 5000) core.diff uploaded by file (License 5000) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419044 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	9cc1a8e893	stasis: Reduce creation of channel snapshots to improve performance ... During some performance testing of Asterisk with AGI, ARI, and lots of Local channels, we noticed that there's quite a hit in performance during channel creation and releasing to the dialplan (ARI continue). After investigating the performance spike that occurs during channel creation, we discovered that we create a lot of channel snapshots that are technically unnecessary. This includes creating snapshots during: * AGI execution * Returning objects for ARI commands * During some Local channel operations * During some dialling operations * During variable setting * During some bridging operations And more. This patch does the following: - It removes a number of fields from channel snapshots. These fields were rarely used, were expensive to have on the snapshot, and hurt performance. This included formats, translation paths, Log Call ID, callgroup, pickup group, and all channel variables. As a result, AMI Status, "core show channel", "core show channelvar", and "pjsip show channel" were modified to either hit the live channel or not show certain pieces of data. While this is unfortunate, the performance gain from this patch is worth the loss in behaviour. - It adds a mechanism to publish a cached snapshot + blob. A large number of publications were changed to use this, including: - During Dial begin - During Variable assignment (if no AMI variables are emitted - if AMI variables are set, we have to make snapshots when a variable is changed) - During channel pickup - When a channel is put on hold/unhold - When a DTMF digit is begun/ended - When creating a bridge snapshot - When an AOC event is raised - During Local channel optimization/Local bridging - When endpoint snapshots are generated - All AGI events - All ARI responses that return a channel - Events in the AgentPool, MeetMe, and some in Queue - Additionally, some extraneous channel snapshots were being made that were unnecessary. These were removed. - The result of ast_hashtab_hash_string is now cached in stasis_cache. This reduces a large number of calls to ast_hashtab_hash_string, which reduced the amount of time spent in this function in gprof by around 50%. #ASTERISK-23811 #close Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/3568/ ........ Merged revisions 416211 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@416216 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	51b6c49681	Originated calls: Fix several originate call problems. ... * Restore the reason value set by pbx_outgoing_attempt() to use AST_CONTROL_xxx values as all the consumers were expecting rather than cause codes. * Fixed the dial routines to set cause codes for more than just ast_request() so pbx_outgoing_attempt() reason codes will function. * Fix inconsistent locked_channel return status in pbx_outgoing_attempt(). The chanel may not have been locked or the channel may have been a stale pointer. * Fixed the OutgoingSpoolFailed channel to run dialplan whenever the dialing fails for an originate exten and 1 < synchronous. * Fix incorrect ast_cond_wait() usage in pbx_outgoing_attempt(). Indroduced by issue ASTERISK-22212 patch. * Made struct pbx_outgoing use the ao2 lock instead of its own lock for the cond wait mutex. No sense in having two locks associated with the same struct when only one is needed. Review: https://reviewboard.asterisk.org/r/3421/ ........ Merged revisions 412581 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412583 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	1ba13718fc	assigned-uniqueids: Miscellaneous cleanup and fixes. ... * Fix memory leak in ast_unreal_new_channels(). Made it generate the ;2 uniqueid on a stack variable instead of mallocing it. * Made send error response to ARI and AMI requests instead of just logging excessive uniqueid length and allowing truncation. action_originate() and ari_channels_handle_originate_with_id(). * Fixed minor truncating uniqueid hole when generating the ;2 uniqueid string length. Created public and internal lengths of uniqueid. The internal length can handle a max public uniqueid plus an appended ;2. * free() and ast_free() are NULL tolerant so they don't need a NULL test before calling. * Made use better struct initialization format instead of the position dependent initialization format. Also anything not explicitly initialized in the struct is initialized to zero by the compiler. * Made ast_channel_internal_set_fake_ids() use the safer ast_copy_string() instead of strncpy(). Review: https://reviewboard.asterisk.org/r/3371/ ........ Merged revisions 410949 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410950 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Scott Griepentrog	80ef9a21b9	uniqueid: channel linkedid, ami, ari object creation with id's ... Much needed was a way to assign id to objects on creation, and much change was necessary to accomplish it. Channel uniqueids and linkedids are split into separate string and creation time components without breaking linkedid propgation. This allowed the uniqueid to be specified by the user interface - and those values are now carried through to channel creation, adding the assignedids value to every function in the chain including the channel drivers. For local channels, the second channel can be specified or left to default to a ;2 suffix of first. In ARI, bridge, playback, and snoop objects can also be created with a specified uniqueid. Along the way, the args order to allocating channels was fixed in chan_mgcp and chan_gtalk, and linkedid is no longer lost as masquerade occurs. (closes issue ASTERISK-23120) Review: https://reviewboard.asterisk.org/r/3191/ ........ Merged revisions 410157 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410158 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kevin Harwell	28c0cb28d0	channel locking: Add locking for channel snapshot creation ... Original commit message by mmichelson (asterisk 12 r403311): "This adds channel locks around calls to create channel snapshots as well as other functions which operate on a channel and then end up creating a channel snapshot. Functions that expect the channel to be locked prior to being called have had their documentation updated to indicate such." The above was initially committed and then reverted at r403398. The problem was found to be in core_local.c in the publish_local_bridge_message function. The ast_unreal_lock_all function locks and adds a reference to the returned channels and while they were being unlocked they were not being unreffed when no longer needed. Fixed by unreffing the channels. Also in bridge.c a lock was obtained on "other->chan", but then an attempt was made to unlock "other" and not the previously locked channel. Fixed by unlocking "other->chan" (closes issue ASTERISK-22709) Reported by: John Bigelow ........ Merged revisions 404237 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404260 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Joshua Colp	3a5cc054ed	res_stasis: Expose event for call forwarding and follow forwarded channel. ... This change adds an event for when an originated call is redirected to another target. This event contains the original channel and the newly created channel. If a stasis subscription exists on the original originated channel for a stasis application then a new subscription will also be created on the stasis application to the redirected channel. This allows the application to follow the call path completely. (closes issue ASTERISK-22719) Reported by: Joshua Colp Review: https://reviewboard.asterisk.org/r/3054/ ........ Merged revisions 403808 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403810 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	f6e92c35df	app_page: Add predial handlers for app_page. ... (closes issue AFS-14) Review: https://reviewboard.asterisk.org/r/3045/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403576 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
David M. Lee	1212906351	Reverting r403311. It's causing ARI tests to hang. ... ........ Merged revisions 403398 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403404 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Mark Michelson	8e8b329e14	Add channel locking for channel snapshot creation. ... This adds channel locks around calls to create channel snapshots as well as other functions which operate on a channel and then end up creating a channel snapshot. Functions that expect the channel to be locked prior to being called have had their documentation updated to indicate such. ........ Merged revisions 403311 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403314 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Mark Michelson	ee21eee7e0	Cache string values of formats on ast_format_cap() to save processing. ... Channel snapshots have string representations of the channel's native formats. Prior to this change, the format strings were re-created on ever channel snapshot creation. Since channel native formats rarely change, this was very wasteful. Now, string representations of formats may optionally be stored on the ast_format_cap for cases where string representations may be requested frequently. When formats are altered, the string cache is marked as invalid. When strings are requested, the cache validity is checked. If the cache is valid, then the cached strings are copied. If the cache is invalid, then the string cache is rebuilt and copied, and the cache is marked as being valid again. Review: https://reviewboard.asterisk.org/r/2879 ........ Merged revisions 400356 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400363 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Joshua Colp	c1235f2639	Reduce channel snapshot creation and publishing by up to 50%. ... This change introduces the ability to stage channel snapshot creation and publishing by suppressing the implicit creation and publishing that some functions have. Once all operations are executed the staging is marked as done and a single snapshot is created and published. Review: https://reviewboard.asterisk.org/r/2889/ ........ Merged revisions 400265 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400266 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	638577bef7	originate/call forwarding: Fix a crash when forwarding a call from originate ... (closes issue ASTERISK-22487) Reported by: David M. Lee Review: https://reviewboard.asterisk.org/r/2868/ ........ Merged revisions 399553 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399554 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	40ce5e0d18	Change ast_hangup() to return void and be NULL safe. ... Since ast_hangup() is effectively a channel destructor, it should be a void function. * Make the few silly callers checking the return value no longer do so. Only the CDR and CEL unit tests checked the return value. * Make all callers take advantage of the NULL safe change and remove the NULL check before the call. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394623 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	6258bbe7bd	Update Asterisk's CDRs for the new bridging framework ... This patch is the initial push to update Asterisk's CDR engine for the new bridging framework. This patch guts the existing CDR engine and builds the new on top of messages coming across Stasis. As changes in channel state and bridge state are detected, CDRs are built and dispatched accordingly. This fundamentally changes CDRs in a few ways. (1) CDRs are now *very* reflective of the actual state of channels and bridges. This means CDRs track well with what an actual channel is doing - which is useful in transfer scenarios (which were previously difficult to pin down). It does, however, mean that CDRs cannot be 'fooled'. Previous behavior in Asterisk allowed for CDR applications, channels, and other properties to be spoofed in parts of the code - this no longer works. (2) CDRs have defined behavior in multi-party scenarios. This behavior will not be what everyone wants, but it is a defined behavior and as such, it is predictable. (3) The CDR manipulation functions and applications have been overhauled. Major changes have been made to ResetCDR and ForkCDR in particular. Many of the options for these two applications no longer made any sense with the new framework and the (slightly) more immutable nature of CDRs. There are a plethora of other changes. For a full description of CDR behavior, see the CDR specification on the Asterisk wiki. (closes issue ASTERISK-21196) Review: https://reviewboard.asterisk.org/r/2486/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391947 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jason Parker	b6aac885be	Add dial events to app_queue and app_followme. ... Also fixes an issue in app_dial, where the channels were swapped on dial events. (closes issue ASTERISK-21551) (closes issue ASTERISK-21550) Review: https://reviewboard.asterisk.org/r/2549/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389492 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Joshua Colp	4e38a4eb64	Move origination to use the dialing API and send Stasis messages on dial begin and end. ... (closes issue ASTERISK-21549) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/2512/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389053 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	d04f1fd60a	Publish the outbound channel's application/data when dialing ... This patch does two things: * It fixes a bug where the outbound channel's application/data set by the dialing API/app_dial is not communicated until the channel is hung up. If that happens, AMI would incorrectly send a NewExten event immediately after a Hangup. This isn't really AMI's fault, as the dialing APIs never communicated the 'helpful' app/data on the outbound channel until it was hungup. * It makes public sending a stasis message about a change in channel state. This is useful enough that - for now at least - it should be public. If operations on a channel go to being more coarse-grained, this function could be made private again. Review: https://reviewboard.asterisk.org/r/2548 Note that this problem was found and reported by Matt DiMeo. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388976 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	b8d4e573f1	Add multi-channel Stasis messages; refactor Dial AMI events to Stasis ... This patch does the following: * A new Stasis payload has been defined for multi-channel messages. This payload can store multiple ast_channel_snapshot objects along with a single JSON blob. The payload object itself is opaque; the snapshots are stored in a container keyed by roles. APIs have been provided to query for and retrieve the snapshots from the payload object. * The Dial AMI events have been refactored onto Stasis. This includes dial messages in app_dial, as well as the core dialing framework. The AMI events have been modified to send out a DialBegin/DialEnd events, as opposed to the subevent type that was previously used. * Stasis messages, types, and other objects related to channels have been placed in their own file, stasis_channels. Unit tests for some of these objects/messages have also been written. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384910 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	657aa491f0	Separate option_types[] from the struct definition. ... Updated the option_types[] doxygen comment. ........ Merged revisions 380853 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 380854 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380855 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kevin P. Fleming	166b4e2b30	Multiple revisions 369001-369002 ... ........ r369001 | kpfleming | 2012-06-15 10:56:08 -0500 (Fri, 15 Jun 2012) | 11 lines Add support-level indications to many more source files. Since we now have tools that scan through the source tree looking for files with specific support levels, we need to ensure that every file that is a component of a 'core' or 'extended' module (or the main Asterisk binary) is explicitly marked with its support level. This patch adds support-level indications to many more source files in tree, but avoids adding them to third-party libraries that are included in the tree and to source files that don't end up involved in Asterisk itself. ........ r369002 | kpfleming | 2012-06-15 10:57:14 -0500 (Fri, 15 Jun 2012) | 3 lines Add a script to enable finding source files without support-levels defined. ........ Merged revisions 369001-369002 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 369005 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369013 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kinsey Moore	b5a6de76fc	Commit framework for HANGUPCAUSE (replacement for SIP_CAUSE) ... This is the starting point for the Asterisk 11: Who Hung Up work and provides a framework which will allow channel drivers to report the types of hangup cause information available in SIP_CAUSE without incurring the overhead of the MASTER_CHANNEL dialplan function. The initial implementation only includes cause generation for chan_sip and does not include cause code translation utilities. This change deprecates SIP_CAUSE and replaces its method of reporting cause codes with the new framework. This change also deprecates the 'storesipcause' option in sip.conf. Review: https://reviewboard.asterisk.org/r/1822/ (Closes issue SWP-4221) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366408 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Jonathan Rose	655a8d4420	Introducing the log message unique call identifiers feature ... Log messages will now display a call number that they are tied to (ordered for calls based on when they started). This feature is made to be minimally invasive without requiring changes to many of the existing log messages. These IDs won't show up for verbose messages on CLI (but they will in log files) This is currently in phase II of production, see more about this feature on the wiki -- https://wiki.asterisk.org/wiki/display/AST/Unique+Call-ID+Logging Review: https://reviewboard.asterisk.org/r/1823/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360787 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Jonathan Rose	d501c2ea2d	undoing 360785 due to merging mistake ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360786 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Jonathan Rose	bf994f0e04	Introducing the log message unique call identifiers feature ... Log messages will now display a call number that they are tied to (ordered for calls based on when they started). This feature is made to be minimally invasive without requiring changes to many of the existing log messages. These IDs won't show up for verbose messages on CLI (but they will in log files) This is currently in phase II of production, see more about this feature on the wiki -- https://wiki.asterisk.org/wiki/display/AST/Unique+Call-ID+Logging Review: https://reviewboard.asterisk.org/r/1823/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360785 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kinsey Moore	c5b3db1956	Kill off red blobs in most of main/* ... Everything still compiled after making these changes, so I assume these whitespace-only changes didn't break anything (and shouldn't have). git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360190 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Joshua Colp	f5fda0eb74	Transition app_page to using app_confbridge internally for the conference bridge portion of paging. This also adds a new 'announcement' option to ConfBridge user profiles. ... Review: https://reviewboard.asterisk.org/r/1754/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358730 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Terry Wilson	a9d607a357	Opaquify ast_channel structs and lists ... Review: https://reviewboard.asterisk.org/r/1773/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357542 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kinsey Moore	1fac2fba4b	Deprecated macro usage for connected line, redirecting, and CCSS ... This commit adds GoSub alternatives to connected line, redirecting, and CCSS macro hooks so that macro can finally be deprecated. This also adds deprecation warnings for those features when used and in documentation. Review: https://reviewboard.asterisk.org/r/1760/ (closes issue SWP-4256) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357013 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Terry Wilson	57f42bd74f	ast_channel opaquification of pointers and integral types ... Review: https://reviewboard.asterisk.org/r/1753/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356042 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Terry Wilson	34c55e8e7c	Opaquify char * and char[] in ast_channel ... Review: https://reviewboard.asterisk.org/r/1733/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354968 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Terry Wilson	99cae5b750	Opaquify channel stringfields ... Continue channel opaque-ification by wrapping all of the stringfields. Eventually, we will restrict what can actually set these variables, but the purpose for now is to hide the implementation and keep people from adding code that directly accesses the channel structure. Semantic changes will follow afterward. Review: https://reviewboard.asterisk.org/r/1661/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352348 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Terry Wilson	04da92c379	Replace direct access to channel name with accessor functions ... There are many benefits to making the ast_channel an opaque handle, from increasing maintainability to presenting ways to kill masquerades. This patch kicks things off by taking things a field at a time, renaming the field to '__do_not_use_${fieldname}' and then writing setters/getters and converting the existing code to using them. When all fields are done, we can move ast_channel to a C file from channel.h and lop off the '__do_not_use_'. This patch sets up main/channel_interal_api.c to be the only file that actually accesses the ast_channel's fields directly. The intent would be for any API functions in channel.c to use the accessor functions. No more monkeying around with channel internals. We should use our own APIs. The interesting changes in this patch are the addition of channel_internal_api.c, the moving of the AST_DATA stuff from channel.c to channel_internal_api.c (note: the AST_DATA stuff will have to be reworked to use accessor functions when ast_channel is really opaque), and some re-working of the way channel iterators/callbacks are handled so as to avoid creating fake ast_channels on the stack to pass in matching data by directly accessing fields (since "name" is a stringfield and the fake channel doesn't init the stringfields, you can't use the ast_channel_name_set() function). I went with ast_channel_name(chan) for a getter, and ast_channel_name_set(chan, name) for a setter. The majority of the grunt-work for this change was done by writing a semantic patch using Coccinelle ( http://coccinelle.lip6.fr/ ). Review: https://reviewboard.asterisk.org/r/1655/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350223 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Tilghman Lesher	77b670c4ab	Allow each logging destination and console to have its own notion of the verbosity level. ... Review: https://reviewboard.asterisk.org/r/1599 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@346391 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Matthew Jordan	8b5ba33fe0	Merged revisions 335078 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/10 ................ r335078 | mjordan | 2011-09-09 11:27:01 -0500 (Fri, 09 Sep 2011) | 29 lines Merged revisions 335064 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.8 ........ r335064 | mjordan | 2011-09-09 11:09:09 -0500 (Fri, 09 Sep 2011) | 23 lines Updated SIP 484 handling; added Incomplete control frame When a SIP phone uses the dial application and receives a 484 Address Incomplete response, if overlapped dialing is enabled for SIP, then the 484 Address Incomplete is forwarded back to the SIP phone and the HANGUPCAUSE channel variable is set to 28. Previously, the Incomplete application dialplan logic was automatically triggered; now, explicit dialplan usage of the application is required. Additionally, this patch adds a new AST_CONTOL_FRAME type called AST_CONTROL_INCOMPLETE. If a channel driver receives this control frame, it is an indication that the dialplan expects more digits back from the device. If the device supports overlap dialing it should attempt to notify the device that the dialplan is waiting for more digits; otherwise, it can handle the frame in a manner appropriate to the channel driver. (closes issue ASTERISK-17288) Reported by: Mikael Carlsson Tested by: Matthew Jordan Review: https://reviewboard.asterisk.org/r/1416/ ........ ................ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@335079 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
David Vossel	c26c190711	Asterisk media architecture conversion - no more format bitfields ... This patch is the foundation of an entire new way of looking at media in Asterisk. The code present in this patch is everything required to complete phase1 of my Media Architecture proposal. For more information about this project visit the link below. https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal The primary function of this patch is to convert all the usages of format bitfields in Asterisk to use the new format and format_cap APIs. Functionally no change in behavior should be present in this patch. Thanks to twilson and russell for all the time they spent reviewing these changes. Review: https://reviewboard.asterisk.org/r/1083/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306010 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	ec37ffbdaf	ast_callerid restructuring ... The purpose of this patch is to eliminate struct ast_callerid since it has turned into a miscellaneous collection of various party information. Eliminate struct ast_callerid and replace it with the following struct organization: struct ast_party_name { char *str; int char_set; int presentation; unsigned char valid; }; struct ast_party_number { char *str; int plan; int presentation; unsigned char valid; }; struct ast_party_subaddress { char *str; int type; unsigned char odd_even_indicator; unsigned char valid; }; struct ast_party_id { struct ast_party_name name; struct ast_party_number number; struct ast_party_subaddress subaddress; char *tag; }; struct ast_party_dialed { struct { char *str; int plan; } number; struct ast_party_subaddress subaddress; int transit_network_select; }; struct ast_party_caller { struct ast_party_id id; char *ani; int ani2; }; The new organization adds some new information as well. * The party name and number now have their own presentation value that can be manipulated independently. ISDN supplies the presentation value for the name and number at different times with the possibility that they could be different. * The party name and number now have a valid flag. Before this change the name or number string could be empty if the presentation were restricted. Most channel drivers assume that the name or number is then simply not available instead of indicating that the name or number was restricted. * The party name now has a character set value. SIP and Q.SIG have the ability to indicate what character set a name string is using so it could be presented properly. * The dialed party now has a numbering plan value that could be useful to have available. The various channel drivers will need to be updated to support the new core features as needed. They have simply been converted to supply current functionality at this time. The following items of note were either corrected or enhanced: * The CONNECTEDLINE() and REDIRECTING() dialplan functions were consolidated into func_callerid.c to share party id handling code. * CALLERPRES() is now deprecated because the name and number have their own presentation values. * Fixed app_alarmreceiver.c write_metadata(). The workstring[] could contain garbage. It also can only contain the caller id number so using ast_callerid_parse() on it is silly. There was also a typo in the CALLERNAME if test. * Fixed app_rpt.c using ast_callerid_parse() on the channel's caller id number string. ast_callerid_parse() alters the given buffer which in this case is the channel's caller id number string. Then using ast_shrink_phone_number() could alter it even more. * Fixed caller ID name and number memory leak in chan_usbradio.c. * Fixed uninitialized char arrays cid_num[] and cid_name[] in sig_analog.c. * Protected access to a caller channel with lock in chan_sip.c. * Clarified intent of code in app_meetme.c sla_ring_station() and dial_trunk(). Also made save all caller ID data instead of just the name and number strings. * Simplified cdr.c set_one_cid(). It hand coded the ast_callerid_merge() function. * Corrected some weirdness with app_privacy.c's use of caller presentation. Review: https://reviewboard.asterisk.org/r/702/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276347 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Mark Michelson	b5d5cc565f	Enhancements to connected line and redirecting work. ... From reviewboard: Digium has a commercial customer who has made extensive use of the connected party and redirecting information present in later versions of Asterisk Business Edition and which is to be in the upcoming 1.8 release. Through their use of the feature, new problems and solutions have come about. This patch adds several enhancements to maximize usage of the connected party and redirecting information functionality. First, Asterisk trunk already had connected line interception macros. These macros allow you to manipulate connected line information before it was sent out to its target. This patch adds the same feature except for redirecting information instead. Second, the ast_callerid and ast_party_id structures have been enhanced to provide a "tag." This tag can be set with func_callerid, func_connectedline, func_redirecting, and in the case of DAHDI, mISDN, and SIP channels, can be set in a configuration file. The idea behind the callerid tag is that it can be set to whatever value the administrator likes. Later, when running connected line and redirecting macros, the admin can read the tag off the appropriate structure to determine what action to take. You can think of this sort of like a channel variable, except that instead of having the variable associated with a channel, the variable is associated with a specific identity within Asterisk. Third, app_dial has two new options, s and u. The s option lets a dialplan writer force a specific caller ID tag to be placed on the outgoing channel. The u option allows the dialplan writer to force a specific calling presentation value on the outgoing channel. Fourth, there is a new control frame subclass called AST_CONTROL_READ_ACTION added. This was added to correct a very specific situation. In the case of SIP semi-attended (blond) transfers, the party being transferred would not have the opportunity to run a connected line interception macro to possibly alter the transfer target's connected line information. The issue here was that during a blond transfer, the SIP transfer code has no bridged channel on which to queue the connected line update. The way this was corrected was to add this new control frame subclass. Now, we queue an AST_CONTROL_READ_ACTION frame on the channel on which the connected line interception macro should be run. When ast_read is called to read the frame, ast_read responds by calling a callback function associated with the specific read action the control frame describes. In this case, the action taken is to run the connected line interception macro on the transferee's channel. Review: https://reviewboard.asterisk.org/r/652/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@263541 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Richard Mudgett	a5a0a5f867	Consolidate ast_channel.cid.cid_rdnis into ast_channel.redirecting.from.number. ... SWP-1229 ABE-2161 * Ensure chan_local.c:local_call() will not leak cid.cid_dnid when copying. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@256104 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Richard Mudgett	73ef4b8daf	Removed cdrflags from ast_channel structure. ... Only chan_dahdi set a value in cdrflags. Everyone else just copied it around the system. Noone cared about any value it may have contained. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@250565 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Tilghman Lesher	d8e0c58437	Expand codec bitfield from 32 bits to 64 bits. ... Reviewboard: https://reviewboard.asterisk.org/r/416/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@227580 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Russell Bryant	0264eef115	Merge the new Channel Event Logging (CEL) subsystem. ... CEL is the new system for logging channel events. This was inspired after facing many problems trying to represent what is possible to happen to a call in Asterisk using CDR records. For more information on CEL, see the built in HTML or PDF documentation generated from the files in doc/tex/. Many thanks to Steve Murphy (murf) and Brian Degenhardt (bmd) for their hard work developing this code. Also, thanks to Matt Nicholson (mnicholson) and Sean Bright (seanbright) for their assistance in the final push to get this code ready for Asterisk trunk. Review: https://reviewboard.asterisk.org/r/239/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203638 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Mark Michelson	298d745fb4	Add the ability to execute connected line interception macros. ... When connected line updates are received or generated in the middle of an application call, it is now possible to execute a macro to manipulate the connected line data. This way, phone numbers may be manipulated to be more presentable to users, names may be changed for...whatever reason, or whatever else needs to be done may be. Review: https://reviewboard.asterisk.org/r/256 AST-165 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@198727 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Mark Michelson	6f53ed4c67	This commit introduces COLP/CONP and Redirecting party information into Asterisk. ... The channel drivers which have been most heavily tested with these enhancements are chan_sip and chan_misdn. Further work is being done to add Q.SIG support and will be introduced in a later commit. chan_skinny has code added to it here, but according to user pj, the support on chan_skinny is not working as of now. This will be fixed in a later commit. A special thanks goes out to bugtracker user gareth for getting the ball rolling and providing the initial support for this work. Without his initial work on this, this would not have been nearly as painless as it was. This functionality has been tested by Digium's product quality department, as well as a customer site running thousands of calls every day. In addition, many many many many bugtracker users have tested this, too. (closes issue #8824) Reported by: gareth Review: http://reviewboard.digium.com/r/201 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@186525 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Mark Michelson	d521ad9696	* Fixed timeout logic in the dialing API as setting timeouts ... had no effect * Updated dialing API documentation to indicate that timeouts are specified in milliseconds * Added a new timeout argument to the Page application. If time expires, any endpoints which have not answered will be hung up. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@153223 65c4cc65-6c06-0410-ace0-fbb531ad65f3	17 years ago
Kevin P. Fleming	10d36d9f34	fix a few small things found by using sparse ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@152809 65c4cc65-6c06-0410-ace0-fbb531ad65f3	17 years ago
Terry Wilson	84b0093bef	The dialing API should inherit datastores as well as variables ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@146052 65c4cc65-6c06-0410-ace0-fbb531ad65f3	17 years ago