This commit introduces an extension to the endpoint and relevant
resource sizes for PJSIP, transitioning from its current 40-character
constraint to a more versatile 255-character capacity. This enhancement
significantly overcomes limitations related to domain qualification and
practical usage, ultimately delivering improved functionality. In
addition, it includes adjustments to accommodate the expanded realm size
within the ARI, specifically enhancing the maximum realm length.
Resolves: #345
UserNote: With this update, the PJSIP realm lengths have been extended
to support up to 255 characters.
UpgradeNote: As part of this update, the maximum allowable length
for PJSIP endpoints and relevant resources has been increased from
40 to 255 characters. To take advantage of this enhancement, it is
recommended to run the necessary procedures (e.g., Alembic) to
update your schemas.
res_statsis's app loop sleeps for up to .2s waiting on input
to a channel before re-checking the command queue. This can
cause delays between channel setup and bridge.
This change is to send a SIGURG on the sleeping thread when
a new command is enqueued. This exits the sleeping thread out
of the ast_waitfor() call triggering the new command being
processed on the channel immediately.
Resolves: #362
UserNote: Call setup times should be significantly improved
when using ARI.
Make it possible to start a playback and the calling party
to receive audio on a bridge before the call is connected.
Model the implementation after play_on_channel and deliver a
AST_CONTROL_PROGRESS before starting the playback.
For a PJSIP channel this will result in sending a SIP 183
Session Progress.
The documentation on qualify_timeout does not explicitly state that the timeout
includes any time required to perform any needed DNS queries on the endpoint.
If the OPTIONS response is delayed due to the DNS query, it can still render an
endpoint as Unreachable if the net time is enough for qualify_timeout to expire.
Resolves: #352
res_speech_aeap previously did not register an error handler
with aeap, so it was not notified of a disconnect. This resulted
in SpeechBackground never exiting upon a websocket disconnect.
Resolves: #303
From the gdb information, ast_websocket_read reads a message successfully,
then transport_read is called in the serializer. During execution of pjsip_transport_down,
ws_session->stream->fd is closed; ast_websocket_read encounters an error and exits the while loop.
After executing transport_shutdown, the transport's reference count becomes 0, causing a crash when sending SIP messages.
This was due to pjsip_transport_dec_ref executing earlier than pjsip_rx_data_clone, leading to this issue.
In websocket_cb executeing pjsip_transport_add_ref, this we now ensure the transport is not destroyed while in the loop.
Resolves: asterisk#299
In function rtp_ioqueue_thread_remove counter in ioqueue object is not decreased
which prevents unused ICE TURN threads from being removed.
Resolves: #301
Handle session interval lower than endpoint's configured minimum timer
when sending first answer. Timer setting is checked during this step and
needs to handled appropriately.
Before this change, no response was sent at all. After this change a
response with 422 Session Interval too small is sent to UAC.
If the contact_user is configured on the endpoint it will now be set on the local Contact header URI for incoming calls. The contact_user has already been set on the local Contact header URI for outgoing calls.
Resolves: #226
Added a new boolean configuration flag -
`order_multi_row_results_by_initial_column` - to both res_pgsql.conf
and res_config_odbc.conf that allows the administrator to disable the
explicit `ORDER BY` that was previously being added to all generated
SQL statements that returned multiple rows.
Fixes: #179
An earlier cherry-pick that involved rest-api somehow didn't include
a comment change in res/ari/resource_endpoints.h. This commit
corrects that. No changes other than the comment.
The documentation for PJSIP_HEADERS claims that
prefix is optional, but in the code it is actually not.
However, there is no inherent reason for this, as users
may want to retrieve all header names, not just those
beginning with a certain prefix.
This makes the prefix optional for this function,
simply fetching all header names if not specified.
As a result, the documentation is now correct.
Resolves: #230
UserNote: The prefix argument to PJSIP_HEADERS is now
optional. If not specified, all header names will be
returned.
This change adds support for refers that are not session based. It
includes a refer implementation for the PJSIP technology which results
in out-of-dialog REFERs being sent to a PJSIP endpoint. These can be
triggered using the new ARI endpoint `/endpoints/refer`.
Resolves: #71
UserNote: There is a new ARI endpoint `/endpoints/refer` for referring
an endpoint to some URI or endpoint.
In 8d6fdf9c3a invisible bridges were
skipped but that lead to producing metrics with no name and no help.
Keep track of the number of metrics configured and then only emit these.
Add a basic testcase that verifies that there is no '(NULL)' in the
output.
ASTERISK-30474
Fixes#221
UserNote: res_pjsip now allows TLS v1.3 to be enabled if supported by
the underlying PJSIP library. The bundled version of PJSIP supports
TLS v1.3.
From the gdb information, it was found that when calling __ast_free, the size of the
allocated space pointed to by the pointer matches the size created when rtp->themssrc_valid
is equal to 0. However, in reality, when reading the value of rtp->themssrc_valid in gdb,
it is found to be 1.
Within ast_rtcp_write(), the call to ast_rtp_rtcp_report_alloc() uses rtp->themssrc_valid,
which is outside the protection of the rtp_instance lock. However,
ast_rtcp_generate_report(), which is called by ast_rtcp_generate_compound_prefix(), uses
rtp->themssrc_valid within the protection of the rtp_instance lock.
This can lead to the possibility that the value of rtp->themssrc_valid used in the call to
ast_rtp_rtcp_report_alloc() may be different from the value of rtp->themssrc_valid used
within ast_rtcp_generate_report().
Resolves: asterisk#63
Added two new functions (ast_sip_session_get_dialog and
ast_sip_session_get_pjsip_inv_state) that retrieve the dialog and the
pjsip_inv_state respectively from the pjsip_inv_session on the
ast_sip_session struct. This is due to pjproject adding a new field to
the pjsip_inv_session struct that caused crashes when trying to access
fields that were no longer where they were expected to be if a module
was compiled against a different version of pjproject.
Resolves: #145
Add a parking space extension parameter (ParkingSpace) to the Park action.
Park action will attempt to park the call to that extension.
If the extension is already in use, then execution will continue at the next priority.
UserNote: New ParkingSpace parameter has been added to AMI action Park.
Adds the loop_last option to res_musiconhold,
which allows the last audio file in the directory
to be looped perpetually once reached, rather than
circling back to the beginning again.
Resolves: #122
ASTERISK-30462
UserNote: The loop_last option in musiconhold.conf now
allows the last file in the directory to be looped once reached.
Add new type 'sdp_label' when creating a bridge using the ARI. This will
add labels to the SDP for each stream, the label is set to the
corresponding channel id.
Resolves: #91
UserNote: When creating a bridge using the ARI the 'type' argument now
accepts a new value 'sdp_label' which will configure the bridge to add
labels for each stream in the SDP with the corresponding channel id.
We should also return all codecs on an re-INVITE without SDP for a
call that used late offer (e.g. no SDP in the initial INVITE, SDP
in the ACK). Bugfix for feature introduced in ASTERISK-30193
(https://issues.asterisk.org/jira/browse/ASTERISK-30193)
Migration from previous gerrit change that was not merged.
When using mediasec, requests sent after a 401 must still contain the
Security-Client header according to
draft-dawes-sipcore-mediasec-parameter.
Resolves: #48
The current STIR/SHAKEN signing process is inconsistent with the
RFCs in a couple ways that can cause interoperability issues.
RFC8225 specifies that the keys must be ordered lexicographically, but
currently the fields are simply ordered according to the order
in which they were added to the JSON object, which is not
compliant with the RFC and can cause issues with some carriers.
To fix this, we now leverage libjansson's ability to dump a JSON
object sorted by key value, yielding the correct field ordering.
Additionally, telephone numbers must have any leading + prefix removed
and must not contain characters outside of 0-9, *, and # in order
to comply with the RFCs. Numbers are now properly formatted as such.
ASTERISK-30407 #close
Change-Id: Iab76d39447c4b8cf133de85657dba02fda07f9a2
In a three party scenario with INVITE with replaces, we need to
unhold the call, otherwise one party continues to get music on
hold, and the call is not properly bridged between them.
ASTERISK-30428
Change-Id: I5675df11e739be5226b328f8828d4b8d81fbefb4
There are two main parts of the change associated with this
commit. These are driven by the change in call order of
pubsub_on_rx_refresh and pubsub_on_evsub_state by pjproject
when an in-dialog SUBSCRIBE is received.
First, the previous behavior was for pjproject to call
pubsub_on_rx_refresh before calling pubsub_on_evsub_state
when an in-dialog SUBSCRIBE was received that changes the
subscription state.
If that change was a termination due to a re-SUBSCRIBE with
an expires of 0, we used to use the call to pubsub_on_rx_refresh
to set the substate of the evsub to TERMINATE_PENDING before
pjproject could call pubsub_on_evsub_state.
This substate let pubsub_on_evsub_state know that the
subscription TERMINATED event could be ignored as there was
still a subsequent NOTIFY that needed to be generated and
another call to pubsub_on_evsub_state to come with it.
That NOTIFY was sent via serialized_pubsub_on_refresh_timeout
which would see the TERMINATE_PENDING state and transition it
to TERMINATE_IN_PROGRESS before triggering another call to
pubsub_on_evsub_state (which now would clean up the evsub.)
The new pjproject behavior is to call pubsub_on_evsub_state
before pubsub_on_rx_refresh. This means we no longer can set
the state to TERMINATE_PENDING to tell pubsub_on_evsub_state
that it can ignore the first TERMINATED event.
To handle this, we now look directly at the event type,
method type and the expires value to determine whether we
want to ignore the event or use it to trigger the evsub
cleanup.
Second, pjproject now expects the NOTIFY to actually be sent
during pubsub_on_rx_refresh and avoids the protocol violation
inherent in sending a NOTIFY before the SUBSCRIBE is
acknowledged by caching the sent NOTIFY then sending it
after responding to the SUBSCRIBE.
This requires we send the NOTIFY using the non-serialized
pubsub_on_refresh_timeout directly and let pjproject handle
the protocol violation.
ASTERISK-30469
Change-Id: I05c1d91a44fe28244ae93faa4a2268a3332b5fd7
Various changes to ensure that the lexers and parsers can be correctly
generated when REBUILD_PARSERS is enabled.
Some notes:
* Because of the version of flex we are using to generate the lexers
(2.5.35) some post-processing in the Makefile is still required.
* The generated lexers do not contain the problematic C99 check that
was being replaced by the call to sed in the respective Makefiles so
it was removed.
* Since these files are generated, they will include trailing
whitespace in some places. This does not need to be corrected.
Change-Id: Ibbd343606fcf5c0d285b1599e6e8e59f514f2e4e
Sending the "RECORD FILE" command without the optional
`offset_samples` argument can result in two beeps playing on the
channel.
This bug has been present since Asterisk 0.3.0 (2003-02-06).
ASTERISK-30457 #close
Change-Id: I95e88aa59378784d7f0eb648843f090e6723b787
Make the existing CURL parameters configurable and allow
to specify the usable protocols, proxy and DNS timeout.
ASTERISK-30340
Change-Id: I2eb02ef44190e026716720419bcbdbcc8125777b
* Added a new function ast_utf8_replace_invalid_chars() to
utf8.c that copies a string replacing any invalid UTF-8
sequences with the Unicode specified U+FFFD replacement
character. For example: "abc\xffdef" becomes "abc\uFFFDdef".
Any UTF-8 compliant implementation will show that character
as a � character.
* Updated res_pjsip:set_id_from_hdr() to use
ast_utf8_replace_invalid_chars and print a warning if any
invalid sequences were found during the copy.
* Updated stasis_channels:ast_channel_publish_varset to use
ast_utf8_replace_invalid_chars and print a warning if any
invalid sequences were found during the copy.
ASTERISK-27830
Change-Id: I4ffbdb19c80bf0efc675d40078a3ca4f85c567d8
Phones moving between subnets on multi-homed server have their
initially connected interface IP cached in the SERVER variable,
even when it is not specified in the configuration files. This
prevents phones from obtaining the correct SERVER variable value
when they move to another subnet.
ASTERISK-30388 #close
Reported-by: cmaj
Change-Id: I1d18987a9d58e85556b4c4a6814ce7006524cc92
contributed pjproject - patch to check sub->pending_notify
in evsub.c:on_tsx_state before calling
pjsip_evsub_send_request()
res_pjsip_pubsub - change post pjsip 2.13 behavior to use
pubsub_on_refresh_timeout to avoid the ao2_cleanup call on
the sub_tree. This is is because the final NOTIFY send is no
longer the last place the sub_tree is referenced.
ASTERISK-30419
Change-Id: Ib5cc662ce578e9adcda312e16c58a10b6453e438
Removed multiple patches.
Code chages in res_pjsip_pubsub due to changes in evsub.
Pjsip now calls on_evsub_state() before on_rx_refresh(),
so the sub tree deletion that used to take place in
on_evsub_state() now must take place in on_rx_refresh().
Additionally, pjsip now requires that you send the NOTIFY
from within on_rx_refresh(), otherwise it will assert
when going to send the 200 OK. The idea is that it will
look for this NOTIFY and cache it until after sending the
response in order to deal with the self-imposed message
mis-order. Asterisk previously dealt with this by pushing
the NOTIFY in on_rx_refresh(), but pjsip now forces us
to use it's method.
Changes were required to configure in order to detect
which way pjsip handles this as the two are not
compatible for the reasons mentioned above.
A corresponding change in testsuite is required in order
to deal with the small interal timing changes caused by
moving the NOTIFY send.
ASTERISK-30325
Change-Id: I50b00cac89d950d3511d7b250a1c641965d9fe7f
Added NULL pointer check and channel lock to prevent resource release
while the chanspy is processing.
ASTERISK-29604
Change-Id: Ibdc675f98052da32333b19685b1708a3751b6d24
Variable references within global variable assignments are now
expanded rather than being included literally.
ASTERISK-30406 #close
Change-Id: I136e8d6395e90a4c92d9777a46a7bc3edb08d05d
Adds the overlap_context option, which can be used
to explicitly specify a context to use for overlap
dialing extension matches, rather than forcibly
using the context configured for the endpoint.
ASTERISK-30262 #close
Change-Id: Ibbcd4a8b11402428a187fb56b8d4e7408774a0db
Rounding issues with double math were causing rtp timestamp
slips in outgoing packets. We're now back to integer math
and are getting no more slips.
ASTERISK-30391
Change-Id: I6ba992b49ffdf9ebea074581dfa784a188c661a4
Add ability to set HANGUPCAUSE when SIP causecode received in BYE (in addition to currently supported Q.850).
ASTERISK-30319 #close
Change-Id: I3f55622dc680ce713a2ffb5a458ef5dd39fcf645
-----------------
This commit reinstates MES with some casting fixes to the
functions in time.h that convert between doubles and timeval
structures. The casting issues were causing incorrect
timestamps to be calculated which caused transcoding from/to
G722 to produce bad or no audio.
ASTERISK-30391
-----------------
This module has been updated to provide additional
quality statistics in the form of an Asterisk
Media Experience Score. The score is avilable using
the same mechanisms you'd use to retrieve jitter, loss,
and rtt statistics. For more information about the
score and how to retrieve it, see
https://wiki.asterisk.org/wiki/display/AST/Media+Experience+Score
* Updated chan_pjsip to set quality channel variables when a
call ends.
* Updated channels/pjsip/dialplan_functions.c to add the ability
to retrieve the MES along with the existing rtcp stats when
using the CHANNEL dialplan function.
* Added the ast_debug_rtp_is_allowed and ast_debug_rtcp_is_allowed
checks for debugging purposes.
* Added several function to time.h for manipulating time-in-samples
and times represented as double seconds.
* Updated rtp_engine.c to pass through the MES when stats are
requested. Also debug output that dumps the stats when an
rtp instance is destroyed.
* Updated res_rtp_asterisk.c to implement the calculation of the
MES. In the process, also had to update the calculation of
jitter. Many debugging statements were also changed to be
more informative.
* Added a unit test for internal testing. The test should not be
run during normal operation and is disabled by default.
Change-Id: I4fce265965e68c3fdfeca55e614371ee69c65038
When Asterisk receives a new websocket conenction, it creates a new
pjsip transport for it and copies connection data into it. The
transport manager then uses the remote IP address and port on the
transport to create a monitor for each connection. However, the
remote port wasn't being copied, only the IP address which meant
that the transport manager was creating only 1 monitoring entry for
all websocket connections from the same IP address. Therefore, if
one of those connections failed, it deleted the transport taking
all the the connections from that same IP address with it.
* We now copy the remote port into the created transport and the
transport manager behaves correctly.
ASTERISK-30369
Change-Id: Ib506d40897ea6286455ac0be4dfbb0ed43b727e1
Do not crash when a URL has no path component as in this case the
ast_uri_path function will return NULL. Make the code cope with not
having a path.
The below would crash
> media cache create http://google.com /tmp/foo.wav
Thread 1 "asterisk" received signal SIGSEGV, Segmentation fault.
0x0000ffff836616cc in strrchr () from /lib/aarch64-linux-gnu/libc.so.6
(gdb) bt
#0 0x0000ffff836616cc in strrchr () from /lib/aarch64-linux-gnu/libc.so.6
#1 0x0000ffff43d43a78 in file_extension_from_string (str=<optimized out>, buffer=buffer@entry=0xffffca9973c0 "",
capacity=capacity@entry=64) at res_http_media_cache.c:288
#2 0x0000ffff43d43bac in file_extension_from_url_path (bucket_file=bucket_file@entry=0x3bf96568,
buffer=buffer@entry=0xffffca9973c0 "", capacity=capacity@entry=64) at res_http_media_cache.c:378
#3 0x0000ffff43d43c74 in bucket_file_set_extension (bucket_file=bucket_file@entry=0x3bf96568) at res_http_media_cache.c:392
#4 0x0000ffff43d43d10 in bucket_file_run_curl (bucket_file=0x3bf96568) at res_http_media_cache.c:555
#5 0x0000ffff43d43f74 in bucket_http_wizard_create (sorcery=<optimized out>, data=<optimized out>, object=<optimized out>)
at res_http_media_cache.c:613
#6 0x0000000000487638 in bucket_file_wizard_create (sorcery=<optimized out>, data=<optimized out>, object=<optimized out>)
at bucket.c:191
#7 0x0000000000554408 in sorcery_wizard_create (object_wizard=object_wizard@entry=0x3b9f0718,
details=details@entry=0xffffca9974a8) at sorcery.c:2027
#8 0x0000000000559698 in ast_sorcery_create (sorcery=<optimized out>, object=object@entry=0x3bf96568) at sorcery.c:2077
#9 0x00000000004893a4 in ast_bucket_file_create (file=file@entry=0x3bf96568) at bucket.c:727
#10 0x00000000004f877c in ast_media_cache_create_or_update (uri=0x3bfa1103 "https://google.com",
file_path=0x3bfa1116 "/tmp/foo.wav", metadata=metadata@entry=0x0) at media_cache.c:335
#11 0x00000000004f88ec in media_cache_handle_create_item (e=<optimized out>, cmd=<optimized out>, a=0xffffca9976b8)
at media_cache.c:640
ASTERISK-30375 #close
Change-Id: I6a9433688cb5d3d4be8758b7642d923bdde6c273
This module has been updated to provide additional
quality statistics in the form of an Asterisk
Media Experience Score. The score is avilable using
the same mechanisms you'd use to retrieve jitter, loss,
and rtt statistics. For more information about the
score and how to retrieve it, see
https://wiki.asterisk.org/wiki/display/AST/Media+Experience+Score
* Updated chan_pjsip to set quality channel variables when a
call ends.
* Updated channels/pjsip/dialplan_functions.c to add the ability
to retrieve the MES along with the existing rtcp stats when
using the CHANNEL dialplan function.
* Added the ast_debug_rtp_is_allowed and ast_debug_rtcp_is_allowed
checks for debugging purposes.
* Added several function to time.h for manipulating time-in-samples
and times represented as double seconds.
* Updated rtp_engine.c to pass through the MES when stats are
requested. Also debug output that dumps the stats when an
rtp instance is destroyed.
* Updated res_rtp_asterisk.c to implement the calculation of the
MES. In the process, also had to update the calculation of
jitter. Many debugging statements were also changed to be
more informative.
* Added a unit test for internal testing. The test should not be
run during normal operation and is disabled by default.
ASTERISK-30280
Change-Id: I458cb9a311e8e5dc1db769b8babbcf2e093f107a
Currently, there is no Caller ID available to us when
checking for an extension match when handling INVITEs.
As a result, extension patterns that depend on the Caller ID
are not matched and calls may be incorrectly rejected.
The Caller ID is not available because the supplement that
adds Caller ID to the session does not execute until after
this check. Supplement callbacks cannot yet be executed
at this point since the session is not yet in the appropriate
state.
To fix this without impacting existing behavior, the Caller ID
number is now retrieved before attempting to pattern match.
This ensures pattern matching works correctly and there is
no behavior change to the way supplements are called.
ASTERISK-28767 #close
Change-Id: Iec7f5a3b90e51b65ccf74342f96bf80314b7cfc7
When a call is put on hold and it has moh_passthrough and rtp_timeout
set on the endpoint, the wrong timeout will be used. rtp_timeout_hold is
expected to be used, but rtp_timeout is used instead. This change adds a
couple of checks for locally_held to determine if rtp_timeout_hold needs
to be used instead of rtp_timeout.
ASTERISK-30350
Change-Id: I7b106fc244332014216d12bba851cefe884cc25f
Fix aor lookup on sip path addition. Issue happens in case of dialing
with @ and overriding user part of RURI.
ASTERISK-30100 #close
Reported-by: Yury Kirsanov
Change-Id: I3f2c42a583578c94397b113e32ca3ebf2d600e13
The `ast_geoloc_datastore_add_eprofile` function does not return 0 on
success, it returns the size of the underlying datastore. This means
that the datastore will be freed and its pointer set to NULL when no
error occured at all.
ASTERISK-30346
Change-Id: Iea9b209bd1244cc57b903b9496cb680c356e4bb9
When adding AOC to an outgoing response the code
assumed that a body would exist for comparing the
Content-Type. This isn't always true.
The code now checks to make sure the response has
a body before checking the Content-Type.
ASTERISK-21502
Change-Id: Iaead371434fc3bc693dad487228106a7d7a5ac76
chan_sip supported sending AOC-D and AOC-E information in SIP INFO
messages in an "AOC" header in a format that was originally defined by
Snom. In the meantime, ETSI TS 124 647 introduced an XML-based AOC
format that is supported by devices from multiple vendors, including
Snom phones with firmware >= 8.4.2 (released in 2010).
This commit adds a new res_pjsip_aoc module that inserts AOC information
into outgoing messages or sends SIP INFO messages as described below.
It also fixes a small issue in res_pjsip_session which didn't always
call session supplements on outgoing_response.
* AOC-S in the 180/183/200 responses to an INVITE request
* AOC-S in SIP INFO (if a 200 response has already been sent or if the
INVITE was sent by Asterisk)
* AOC-D in SIP INFO
* AOC-D in the 200 response to a BYE request (if the client hangs up)
* AOC-D in a BYE request (if Asterisk hangs up)
* AOC-E in the 200 response to a BYE request (if the client hangs up)
* AOC-E in a BYE request (if Asterisk hangs up)
The specification defines one more, AOC-S in an INVITE request, which
is not implemented here because it is not currently possible in
Asterisk to have AOC data ready at this point in call setup. Once
specifying AOC-S via the dialplan or passing it through from another
SIP channel's INVITE is possible, that might be added.
The SIP INFO requests are sent out immediately when the AOC indication
is received. The others are inserted into an appropriate outgoing
message whenever that is ready to be sent. In the latter case, the XML
is stored in a channel variable at the time the AOC indication is
received. Depending on where the AOC indications are coming from (e.g.
PRI or AMI), it may not always be possible to guarantee that the AOC-E
is available in time for the BYE.
Successfully tested AOC-D and both variants of AOC-E with a Snom D735
running firmware 10.1.127.10. It does not appear to properly support
AOC-S however, so that could only be tested by inspecting SIP traces.
ASTERISK-21502 #close
Reported-by: Matt Jordan <mjordan@digium.com>
Change-Id: Iebb7ad0d5f88526bc6629d3a1f9f11665434d333
When passing a JSON body to the 'create' channel route
it would be converted into Asterisk variables, but never
freed resulting in a memory leak.
This change makes it so that the variables are freed in
all cases.
ASTERISK-30344
Change-Id: I924dbd866a01c6073e2d6fb846ccaa27ef72d49d
This fixes a small typo in the from_domain documentation on the endpoint documentation
ASTERISK-30328 #close
Change-Id: Ia6f0897c3f5cab899ef2cde6b3ac07265b8beb21
Adds support for the capture agent name field
of the Homer protocol to Asterisk by allowing
users to specify a name that will be sent to
the HEP server.
ASTERISK-30322 #close
Change-Id: I6136583017f9dd08daeb8be02f60fb8df4639a2b
Some SIP devices use an empty extension for PLAR functionality.
Rather than rejecting these empty extensions, we now use the s
extension for such calls to mirror the existing PLAR functionality
in Asterisk (e.g. chan_dahdi).
ASTERISK-30265 #close
Change-Id: I0861a405cd49bbbf532b52f7b47f0e2810832590
Updates the documentation for the 'contact_user' field to point out the
default outbound contact if no contact_user is specified 's'
ASTERISK-30316 #close
Change-Id: I61f24fb9164e4d07e05908a2511805281874c876
The commit that rearchitected media formats,
a2c912e997 (ASTERISK_23114)
introduced a regression by improperly translating code in res_adsi.c.
In particular, the pointer to the frame buffer was initialized
at the top of adsi_careful_send, rather than dynamically updating it
for each frame, as is required.
This resulted in the first frame being repeatedly sent,
rather than advancing through the frames.
This corrupted the transmission of the CAS to the CPE,
which meant that CPE would never respond with the DTMF acknowledgment,
effectively completely breaking ADSI functionality.
This issue is now fixed, and ADSI now works properly again.
ASTERISK-29793 #close
Change-Id: Icdeddf733eda2981c98712d1ac9cddc0db507dbe
Adds support for custom URI and header parameters
in the From header in PJSIP. Parameters can be
both set and read using this function.
ASTERISK-30150 #close
Change-Id: Ifb1bc3c512ad5f6faeaebd7817f004a2ecbd6428
It was possible for a module that registered for transport monitor
events to pass in a pjsip_transport that had already been freed.
This caused pjsip_transport_events to crash when looking up the
monitor for the transport. The fix is a two pronged approach.
1. We now increment the reference count on pjsip_transports when we
create monitors for them, then decrement the count when the
transport is going to be destroyed.
2. There are now APIs to register and unregister monitor callbacks
by "transport key" which is a string concatenation of the remote ip
address and port. This way the module needing to monitor the
transport doesn't have to hold on to the transport object itself to
unregister. It just has to save the transport_key.
* Added the pjsip_transport reference increment and decrement.
* Changed the internal transport monitor container key from the
transport->obj_name (which may not be unique anyway) to the
transport_key.
* Added a helper macro AST_SIP_MAKE_REMOTE_IPADDR_PORT_STR() that
fills a buffer with the transport_key using a passed-in
pjsip_transport.
* Added the following functions:
ast_sip_transport_monitor_register_key
ast_sip_transport_monitor_register_replace_key
ast_sip_transport_monitor_unregister_key
and marked their non-key counterparts as deprecated.
* Updated res_pjsip_pubsub and res_pjsip_outbound_register to use
the new "key" monitor functions.
NOTE: res_pjsip_registrar also uses the transport monitor
functionality but doesn't have a persistent object other than
contact to store a transport key. At this time, it continues to
use the non-key monitor functions.
ASTERISK-30244
Change-Id: I1a20baf2a8643c272dcf819871d6c395f148f00b
This PR contains two relatively separate changes in channel.c and
res_pjsip_session.c which ensure that topology changes are not ignored
in cases where they should be handled.
For channel.c:
The function ast_channel_request_stream_topology_change only triggers a
stream topology request change indication, if the channel's topology
does not equal the requested topology. However, a channel could be in a
state where it is currently "negotiating" a new topology but hasn't
updated it yet, so the topology request change would be lost. Channels
need to be able to handle such situations internally and stream
topology requests should therefore always be passed on.
In the case of chan_pjsip for example, it queues a session refresh
(re-INVITE) if it is currently in the middle of a transaction or has
pending requests (among other reasons).
Now, ast_channel_request_stream_topology_change always indicates a
stream topology request change even if the requested topology equals the
channel's topology.
For res_pjsip_session.c:
The function resolve_refresh_media_states does not process stream state
changes if the delayed active state differs from the current active
state. I.e. if the currently active stream state has changed between the
time the sip session refresh request was queued and the time it is being
processed, the session refresh is ignored. However, res_pjsip_session
contains logic that ensures that session refreshes are queued and
re-queued correctly if a session refresh is currently not possible. So
this check is not necessary and led to some session refreshes being
lost.
Now, a session refresh is done even if the delayed active state differs
from the current active state and it is checked whether the delayed
pending state differs from the current active - because that means a
refresh is necessary.
Further, the unit test of resolve_refresh_media_states was adapted to
reflect the new behavior. I.e. the changes to delayed pending are
prioritized over the changes to current active because we want to
preserve the original intention of the pending state.
ASTERISK-30184
Change-Id: Icd0703295271089057717006730b555b9a1d4e5a
The "RECORD FILE" command in res_agi has its own
implementation for actually doing the recording. This
has resulted in it not actually obeying the option
"transmit_silence" when recording.
This change causes it to now send silence if the
option is enabled.
ASTERISK-30314
Change-Id: Ib3a85601ff35d1b904f836691bad8a4b7e957174
When a websocket (or potentially any stateful connection) is quickly
created then destroyed, it is possible that the qualify thread will
destroy the transaction before the initialzing thread is finished
with it.
Depending on the timing, this can cause an assertion within pjsip.
To prevent this, ast_send_stateful_response will now create the group
lock and add a reference to it before creating the transaction.
While this should resolve the crash, there is still the potential that
the contact will not be cleaned up properly, see:ASTERISK~29286. As a
result, the contact has to 'time out' before it will be removed.
ASTERISK-28689
Change-Id: Id050fded2247a04d8f0fc5b8a2cf3e5482cb8cee
Current registration code use pjsip_parse_uri to verify outbound_proxy
that is different from the reading this option for the endpoint. This
made value with multiple proxies invalid for registration pjsip settings.
Removing URI validation helps to use registration through multiple proxies.
ASTERISK-30217 #close
Change-Id: I064558e66f04b9f3260c46181812a01349761357
Fix compilation errors caused by using size_t
instead of uintmax_t and non-portable format
specifiers.
ASTERISK-30273 #close
Change-Id: I363e6057ef84d54b88af80d23ad6147eef9216ee
Currently chan_pjsip on receiving a re-INVITE without SDP will only
return the codecs that are previously negotiated and not offering
all enabled codecs.
This causes interoperability issues with different equipment (e.g.
from Cisco) for some of our customers and probably also in other
scenarios involving 3PCC infrastructure.
According to RFC 3261, section 14.2 we SHOULD return all codecs
on a re-INVITE without SDP
The PR proposes a new parameter to configure this behaviour:
all_codecs_on_empty_reinvite. It includes the code, documentation,
alembic migrations, CHANGES file and example configuration additions.
ASTERISK-30193 #close
Change-Id: I69763708d5039d512f391e296ee8a4d43a1e2148
The PJSIP notify CLI commands allow for using
"options" configured in pjsip_notify.conf.
This allows these same options to be used in
AMI actions as well.
Additionally, as part of this improvement,
some repetitive common code is refactored.
ASTERISK-30263 #close
Change-Id: Ie4496b322b63b61eaf9672183a959ab99a04b6b5
Expands the pjsip logger to support the ability to filter
by SIP message method. This can make certain types of SIP debugging
easier by only logging messages of particular method(s).
ASTERISK-30146 #close
Co-authored-by: Sean Bright <sean@seanbright.com>
Change-Id: I9c8cbb6fc8686ef21190eb42e08bc9a9b147707f
pjproject does not provide any mechanism of removing
event packages, which means that once a subscription
handler is registered, it is effectively permanent.
pjproject will assert if the same event package is
ever registered again, so currently unloading and
loading any Asterisk modules that use subscriptions
will cause a crash that is beyond our control.
For that reason, we now prevent users from being
able to unload these modules, to prevent them
from ever being loaded twice.
ASTERISK-30264 #close
Change-Id: I7fdcb1a5e44d38b7ba10c44259fe98f0ae9bc12c
Add enum to allow setting optional direction. If set to only one
direction, only feed matching-direction frames to the associated
slin factory.
This prevents mangling the transcoder on non-mixed frames when the
READ and WRITE frames would have otherwise required it. Also
removes the need to mute or discard the un-wanted frames as they
are no longer added in the first place.
res_stasis_snoop is changed to use this addition to set direction
on audiohook based on spy direction.
If no direction is set, the ast_audiohook_init will init this enum
to BOTH which maintains existing functionality.
ASTERISK-30252
Change-Id: If8716bad334562a5d812be4eeb2a92e4f3be28eb
Adds support for detecting audible ringback tone
to the TONE_DETECT function using the p option.
ASTERISK-30254 #close
Change-Id: Ie2329ff245248768367d26749c285fbe823f6414
"fname" is passed in as a const char *, but strstr() mangles that
into a char *, and we were attempting to modify the string in place.
This is an unwanted (and undocumented) side-effect.
ASTERISK-30213
Change-Id: Ifa36d352aafeb7f9beec3f746332865c7d21e629
Also added a note to the geolocation.conf.sample file
and added a README to the res/res_geolocation/wiki
directory.
Change-Id: I89c3c5db8c0701b33127993622d5e4f904bddfbc
This patch adds support for mediasec SIP headers and SDP attributes.
These are defined in RFC 3329, 3GPP TS 24.229 and
draft-dawes-sipcore-mediasec-parameter. The new features are
implemented so that a backbone for RFC 3329 is present to streamline
future work on RFC 3329.
With this patch, Asterisk can communicate with Deutsche Telekom trunks
which require these fields.
ASTERISK-30032
Change-Id: Ia7f5b5ba42db18074fdd5428c4e1838728586be2
Avoid crashing by skipping invisible bridges and checking the
snapshot for a null pointer. In effect this is how the bridges
are enumerated in res/ari/resource_bridges.c already.
ASTERISK-30239
ASTERISK-30237
Change-Id: I58ef9f44036feded5966b5fc70ae754f8182883d
If geolocation is not in use for an endpoint, the NOTICE
log level is currently spammed with messages about this,
even though nothing is wrong and these messages provide
no real value. These log messages are therefore changed
to debugs.
ASTERISK-30241 #close
Change-Id: I656b355d812f67cc0f0fdf09b00b0e1458598bb4
This patch adds a new option to the 100rel parameter for pjsip
endpoints called "peer_supported". When an endpoint with this option
receives an incoming request and the request indicated support for the
100rel extension, then Asterisk will send 1xx responses reliably. If
the request did not indicate 100rel support, Asterisk sends 1xx
responses normally.
ASTERISK-30158
Change-Id: Id6d95ffa8f00dab118e0b386146e99f254f287ad
Adding user=phone to local-side uri's when user_eq_phone=yes is set for
an endpoint. Previously this would only add the header to the To and R-URI.
ASTERISK-30178
Change-Id: Id3bfb5d225d762e7d2668c023fe09e4541ae8600
Fixed a segfault caused by var_list_from_loc_info() encountering
an empty location info element.
Fixed an issue in ast_strsep() where a value with only whitespace
wasn't being preserved.
Fixed an issue in ast_variable_list_from_quoted_string() where
an empty value was considered a failure.
ASTERISK-30215
Reported by: Dan Cropp
Change-Id: Ieca64e061a6d9298f0196c694b60d986ef82613a
This change adds an option, answeredonly, that will prevent music on
hold on channels that are not answered.
ASTERISK-30135
Change-Id: I1ab0defa43a29a26ae39f94c623596cf90fddc08
This change allows TEL URI requests to come through for basic calls. The
allowed requests are INVITE, ACK, BYE, and CANCEL. The From and To
headers will now allow TEL URIs, as well as the request URI.
Support is only for TEL URIs present in traffic from a remote party.
Asterisk does not generate any TEL URIs on its own.
ASTERISK-26894
Change-Id: If5729e6cd583be7acf666373bf9f1b9d653ec29a
We're validating the following functionality:
encrypting a block of data with RSA
decrypting a block of data with RSA
signing a block of data with RSA
verifying a signature with RSA
encrypting a block of data with AES-ECB
encrypting a block of data with AES-ECB
as well as accessing test keys from the keystore.
ASTERISK-30045 #close
Change-Id: I0d10e7b41009c5290a4356c6480e636712d5c96d
Added an 'a' option to the GEOLOC_PROFILE function to allow
variable lists like location_info_refinement to be appended
to instead of replacing the entire list.
Added an 'r' option to the GEOLOC_PROFILE function to resolve all
variables before a read operation and after a Set operation.
Added a few missing parameters to the ones allowed for writing
with GEOLOC_PROFILE.
Fixed a bug where calling GEOLOC_PROFILE to read a parameter
might actually update the profile object.
Cleaned up XML documentation a bit.
ASTERISK-30190
Change-Id: I75f541db43345509a2e86225bfa4cf8e242e5b6c
You can now specify the location object's format, location_info,
method, location_source and confidence parameters directly on
a profile object for simple scenarios where the location
information isn't common with any other profiles. This is
mutually exclusive with setting location_reference on the
profile.
Updated appdocsxml.dtd to allow xi:include in a configObject
element. This makes it easier to link to complete configOptions
in another object. This is used to add the above fields to the
profile object without having to maintain the option descriptions
in two places.
ASTERISK-30185
Change-Id: Ifd5f05be0a76f0a6ad49fa28d17c394027677569
Added profile parameter "suppress_empty_ca_elements" that
will cause Civic Address elements that are empty to be
suppressed from the outgoing PIDF-LO document.
Fixed a possible SEGV if a sub-parameter value didn't have a
value.
ASTERISK-30177
Change-Id: I924ccc5aa2f45110a3155b22e53dfaf3ef2092dd
The trigger to perform outgoing geolocation processing is the
presence of a geoloc_outgoing_call_profile on an endpoint. This
is intentional so as to not leak location information to
destinations that shouldn't receive it. In a totally dynamic
configuration scenario however, there may not be any profiles
defined in geolocation.conf. This makes it impossible to do
outgoing processing without defining a "dummy" profile in the
config file.
This commit adds 4 built-in profiles:
"<prefer_config>"
"<discard_config>"
"<prefer_incoming>"
"<discard_incoming>"
The profiles are empty except for having their precedence
set and can be set on an endpoint to allow processing without
entries in geolocation.conf. "<discard_config>" is actually the
best one to use in this situation.
ASTERISK-30182
Change-Id: I1819ccfa404ce59802a3a07ad1cabed60fb9480a
When producing an outgoing SDP we iterate through the configured
formats and produce SDP information. It is possible for some
configured formats to not have SDP information available. If this
is the case we skip over them to allow the SDP to still be
produced.
ASTERISK-29185
Change-Id: I3e37569aa4ca341260e6ca5904dc2f75e46a1749
This change adds support using the pjsip_tls_transport_restart
function for reloading the TLS certificate and key, if the filenames
remain unchanged. This is useful for Let's Encrypt and other
situations. Note that no restart of the transport will occur if
the certificate and key remain unchanged.
ASTERISK-30186
Change-Id: I9bc95a6bf791830a9491ad9fa43c17d4010028d0
Fixes two typos that cause fax detection to not work.
One refers to the wrong frame variable, and the other
refers to the subclass.integer instead of the frametype
as it should.
ASTERISK-30192 #close
Change-Id: I7b35fdb7bcf25a29a212eee37c20812c64ab3ef1
Set termination state to old subscriptions to prevent queueing and sending
NOTIFY messages on exten/device state changes.
Postpone destruction of old subscriptions until all already queued tasks
that may be using old subscriptions have completed.
ASTERISK-29906
Change-Id: I96582aad3a26515ca73a8460ee6756f56f6ba23b
* Added processing for the 'confidence' element.
* Added documentation to some APIs.
* removed a lot of complex code related to the very-off-nominal
case of needing to process multiple location info sources.
* Create a new 'ast_geoloc_eprofile_to_pidf' API that just takes
one eprofile instead of a datastore of multiples.
* Plugged a huge leak in XML processing that arose from
insufficient documentation by the libxml/libxslt authors.
* Refactored stylesheets to be more efficient.
* Renamed 'profile_action' to 'profile_precedence' to better
reflect it's purpose.
* Added the config option for 'allow_routing_use' which
sets the value of the 'Geolocation-Routing' header.
* Removed the GeolocProfileCreate and GeolocProfileDelete
dialplan apps.
* Changed the GEOLOC_PROFILE dialplan function as follows:
* Removed the 'profile' argument.
* Automatically create a profile if it doesn't exist.
* Delete a profile if 'inheritable' is set to no.
* Fixed various bugs and leaks
* Updated Asterisk WiKi documentation.
ASTERISK-30167
Change-Id: If38c23f26228e96165be161c2f5e849cb8e16fa0
Adjusts some logging levels to be more or less important,
that is more prominent when actual problems occur and less
prominent for less noteworthy things.
ASTERISK-30153 #close
Change-Id: Ifc8f7df427aa018627db462125ae744986d3261b
There are a handful of files in the tree that
reference an SVN link for the coding guidelines.
This removes these because the links are dead
and the vast majority of source files do not
contain these links, so this is more consistent.
app_skel still maintains an (up to date) link
to the coding guidelines.
ASTERISK-30159 #close
Change-Id: I35bbb20f66982e98099cff3029ede20091ffdac7
Move the call to ast_sip_location_prune_boot_contacts() *after* the call
to ast_res_pjsip_init_options_handling() so that
res/res_pjsip/pjsip_options.c is informed about the contact deletion and
updates its sip_options_contact_statuses list. This allows for an AMI
event to be sent by res/res_pjsip/pjsip_options.c if the endpoint
registers again from the same remote address and port (i.e., same URI)
as used before the Asterisk restart.
ASTERISK-30109
Reported-by: Michael Neuhauser
Change-Id: I1ba4478019e4931a7085f62708d9b66837e901a8
line 196: loc_src = '\0';
should have been
line 196: *loc_src = '\0';
The issue was caught by the gcc optimizer complaining that
loc_src had a zero length because the pointer itself was being
set to NULL instead of the _contents_ of the pointer being set
to the NULL terminator.
ASTERISK-30138
Reported-by: Sean Bright
Change-Id: Id247be113cc8510f043ca053d5b4f5f3d32acd29
This commit adds res_pjsip_geolocation which gives chan_pjsip
the ability to use the core geolocation capabilities.
This commit message is intentionally short because this isn't
a simple capability. See the documentation at
https://wiki.asterisk.org/wiki/display/AST/Geolocation
for more information.
THE CAPABILITIES IMPLEMENTED HERE MAY CHANGE BASED ON
USER FEEDBACK!
ASTERISK-30128
Change-Id: Ie2e2bcd87243c2cfabc43eb823d4427c7086f4d9
This commit adds res_geolocation which creates the core capabilities
to manipulate Geolocation information on SIP INVITEs.
An upcoming commit will add res_pjsip_geolocation which will
allow the capabilities to be used with the pjsip channel driver.
This commit message is intentionally short because this isn't
a simple capability. See the documentation at
https://wiki.asterisk.org/wiki/display/AST/Geolocation
for more information.
THE CAPABILITIES IMPLEMENTED HERE MAY CHANGE BASED ON
USER FEEDBACK!
ASTERISK-30127
Change-Id: Ibfde963121b1ecf57fd98ee7060c4f0808416303
A sporadic test failure was happening when executing the AEAP
Websocket transport tests. It was originally thought this was
due to things not getting cleaned up fast enough, but upon further
investigation I determined the underlying cause was poll()
getting interrupted and this not being handled in all places.
This change adds EINTR and EAGAIN handling to the Websocket
client connect code as well as the AEAP Websocket transport code.
If either occur then the code will just go back to waiting
for data.
The originally disabled failure test case has also been
re-enabled.
ASTERISK-30099
Change-Id: I1711a331ecf5d35cd542911dc6aaa9acf1e172ad
Adds a CLI command similar to "dialplan eval function" except for
applications: "dialplan exec application", useful for quickly
testing certain application behavior directly from the CLI
without writing any dialplan.
ASTERISK-30062 #close
Change-Id: I42e9fa9b60746c21450d40f99a026d48d2486dde
These new functions allow retrieving information from headers on 200 OK
INVITE response.
ASTERISK-29999
Change-Id: I264a610a9333359297a0825feb29a1bb4f4ad144
Switched res_pjsip_outbound_registration.so dep to optional. Added
module loaded check before using it.
ASTERISK-30101 #close
Change-Id: Ia34f1684d984e821fbdd4de8911f930337703666
Microsoft recently began rejecting all requests for
ICS calendars on Office 365 with 400 errors if
the request doesn't contain a user agent. See:
https://docs.microsoft.com/en-us/answers/questions/883904/34the-remote-server-returned-an-error-400-bad-requ.html
Accordingly, we now send a user agent on requests for
ICS files so that requests to Office 365 will work as
they did before.
ASTERISK-30106
Change-Id: Ie9dcaef12ae8adf37533c684499eb11005fac8f7
Rightly the use of wildcards in certificates is disallowed in accordance
with RFC5922. However, RFC2818 does make some allowances with regards to
their use when using subject alt names with DNS name types.
As such this patch creates a new setting for TLS transports called
'allow_wildcard_certs', which when it and 'verify_server' are both enabled
allows DNS name types, as well as the common name that start with '*.'
to match as a wildcard.
For instance: *.example.com
will match for: foo.example.com
Partial matching is not allowed, e.g. f*.example.com, foo.*.com, etc...
And the starting wildcard only matches for a single level.
For instance: *.example.com
will NOT match for: foo.bar.example.com
The new setting is disabled by default.
ASTERISK-30072 #close
Change-Id: If0be3fdab2e09c2a66bb54824fca406ebaac3da4
Finding an application and executing it if found is
a common task throughout Asterisk. This adds a helper
function around pbx_exec to do this, to eliminate
redundant code and make it easier for modules to
substitute variables and execute applications by name.
ASTERISK-30061 #close
Change-Id: Ifee4d2825df7545fb515d763d393065675140c84
An m option to Park and ParkAndAnnounce now allows
specifying a music on hold class override.
ASTERISK-30087
Change-Id: I03de8d97b100e451b2611b5a621d48750f5d6a9e
Currently, PJSIP will randomly wait up to 10 seconds for each
outbound registration's initial attempt. The reason for this
is to avoid having all outbound registrations attempt to register
simultaneously.
This can create limitations with the test suite where we need to
be able to receive inbound calls potentially within 10 seconds of
starting up. For instance, we might register to another server
and then try to receive a call through the registration, but if
the registration hasn't happened yet, this will fail, and hence
this inconsistent behavior can cause tests to fail. Ultimately,
this requires a smaller random value because there may be no good
reason to wait for up to 10 seconds in these circumstances.
To address this, a new config option is introduced which makes this
maximum delay configurable. This allows, for instance, this to be
set to a very small value in test systems to ensure that registrations
happen immediately without an unnecessary delay, and can be used more
generally to control how "tight" the initial outbound registrations
are.
ASTERISK-29965 #close
Change-Id: Iab989a8e94323e645f3a21cbb6082287c7b2f3fd
When a pjsip endpoint is defined with timers=always, this has been a
functional noop. This patch correctly sets the feature bitmap to both
enable support for session timers and to enable them even when the
endpoint itself does not request or support timers.
ASTERISK-29603
Reported-By: Ray Crumrine
Change-Id: I8b5eeaa9ec7f50cc6d96dd34c2b4aa9c53fb5440
If there is scheduled notification, we must delete it
to avoid using destroyed subscriptions.
ASTERISK-29906
Change-Id: I1c644e5e15a8fe43eed8e4f9112f113cbf87a40f
res_calendar will trigger an assertion currently
if the ending time is calculated to be in the past.
Unlike the reminder and start times, however, there
is currently no check to catch non-positive times
and set them to 1. As a result, if we get a negative
value by happenstance, this can cause a crash.
To prevent the assertion from begin triggered, we now
use the same logic as the reminder and start events
to catch this issue before it can cause a problem.
ASTERISK-29981 #close
Change-Id: Idfb3204d195f350d2575fb4bc72a54a597d6e93c
Emits a warning if the user has requested a parking spot that
is out of bounds for the requested parking lot.
ASTERISK-30086
Change-Id: I1080371e4f63e94724455003753014fbd3f95fbf
The change "Add LOCAL/REMOTE tags in dialog-info+xml" set both "local"
Identity Element URI and Target Element URI to the same value -
the channel Caller Number.
For Identity Element it's ok to set as Caller ID.
But Local Target URI should be set as local URI.
In this case the Local Target URI can be used for Directed Call Pickup
by Polycom ip-phones (parameter useLocalTargetUriforLegacyPickup).
Also XML sanitized Display names.
ASTERISK-24601
Change-Id: If130a2f2f3b2339b14dca0ec0ebeea3a87b34343
Agi commnad exec can now evaluate dialplan functions and
variables if variable AGIEXECFULL is set to yes. this can
be useful when executing Playback or Read from agi.
ASTERISK-30058 #close
Change-Id: I669991f540496e7bddd096fec82b52c083036832
This change exposes the channel driver's unique id (i.e. the Call-ID
for chan_sip/chan_pjsip based channels) to ARI channel resources
as `protocol_id`.
ASTERISK-30027
Reported by: Moritz Fain
Tested by: Moritz Fain
Change-Id: I7cc6e7a9d29efe74bc27811d788dac20fe559b87
As part of PJSIP 2.11 a behavior change was done to require
a matching remote hostname on an established transport for
secure transports. Since the Websocket transport is considered
a secure transport this caused the existing connection to not
be found and used.
We now set the remote hostname and the transport can be found.
ASTERISK-30065
Change-Id: Ia1cdef33e1411f927985b4b852c95e163c080e94
This is needed to be able to restore it in REGISTER responses,
otherwise the client won't be able to find the contact it created.
ASTERISK-30042
Change-Id: I0c5823918199acf09246b3b206fbde66773688f6
Adjusts the pjsip show registration(s) commands to show
the amount of seconds remaining until a registration
expires.
ASTERISK-29845 #close
Change-Id: Ic4fea15a1a1056c424416def49d1ca8e776c0483
Most issues were in stringfields and had to do with comparing
a pointer to an constant/interned string with NULL. Since the
string was a constant, a pointer to it could never be NULL so
the comparison was always "true". gcc now complains about that.
There were also a few issues where determining if there was
enough space for a memcpy or s(n)printf which were fixed
by defining some of the involved variables as "volatile".
There were also a few other miscellaneous fixes.
ASTERISK-30044
Change-Id: Ia081ca1bcfb329df6487c4660aaf1944309eb570
Adds version information for applications, functions,
and manager events/actions.
This is not completely exhaustive by any means but
covers most new things added that have release
versioning information in the issue tracker.
ASTERISK-29940 #close
Change-Id: I506401e93c799715dbbe97c0a8ba18af2bf5e131
added new global config option "allow_sending_180_after_183"
that if enabled will preserve 180 after a 183
ASTERISK-29842
Change-Id: I8a53f8c35595b6d16d8e86e241b5f110d92f3d18
Add framework to connect to, and read and write protocol based
messages from and to an external application using an Asterisk
External Application Protocol (AEAP). This has been divided into
several abstractions:
1. transport - base communication layer (currently websocket only)
2. message - AEAP description and data (currently JSON only)
3. transaction - links/binds requests and responses
4. aeap - transport, message, and transaction handler/manager
This patch also adds an AEAP implementation for speech to text.
Existing speech API callbacks for speech to text have been completed
making it possible for Asterisk to connect to a configured external
translator service and provide audio for STT. Results can also be
received from the external translator, and made available as speech
results in Asterisk.
Unit tests have also been created that test the AEAP framework, and
also the speech to text implementation.
ASTERISK-29726 #close
Change-Id: Iaa4b259f84aa63501e5fd2a6fb107f900b4d4ed2
There was an issue with the conditional where STIR/SHAKEN would be
enabled even when not configured. It has been changed to ensure that if
a profile does not exist and stir_shaken is not set in pjsip.conf, then
the conditional will return from the function without performing
STIR/SHAKEN operations.
ASTERISK-30024
Change-Id: I41286a3d35b033ccbfbe4129427a62cb793a86e6
The async_operations setting on a transport configures how
many simultaneous incoming packets the transport can handle
when multiple threads are polling and waiting on the transport.
As we only use a single thread this was needlessly creating
incoming packets when set to a non-default value, wasting memory.
ASTERISK-30006
Change-Id: I1915973ef352862dc2852a6ba4cfce2ed536e68f
Adds a new configuration option, stir_shaken_profile, in pjsip.conf that
can be specified on a per endpoint basis. This option will reference a
stir_shaken_profile that can be configured in stir_shaken.conf. The type
of this option must be 'profile'. The stir_shaken option can be
specified on this object with the same values as before (attest, verify,
on), but it cannot be off since having the profile itself implies wanting
STIR/SHAKEN support. You can also specify an ACL from acl.conf (along
with permit and deny lines in the object itself) that will be used to
limit what interfaces Asterisk will attempt to retrieve information from
when reading the Identity header.
ASTERISK-29476
Change-Id: I87fa61f78a9ea0cd42530691a30da3c781842406
Put checks in place to limit how much we will actually download, as well
as a check for the data we receive at the start to ensure it begins with
what we would expect a certificate to begin with.
ASTERISK-29872
Change-Id: Ifd3c6b8bd52b8b6192a04166ccce4fc8a8000b46
Removes some leftover build and config references to
modules that have since been removed from Asterisk.
ASTERISK-29935 #close
Change-Id: Iaefc73a23f4b2de3c6c14d928050135b6d0ef6af
When adding headers to an outgoing request the headers were cloned using
the dialog's pool when they should have been cloned using tdata's pool.
Under certain circumstances it was possible for the dialog object, and
its pool to be freed while tdata is still active and available. Thus the
cloned header "disappeared", and when tdata tried to later access it a
crash would occur.
This patch makes it so all added headers are cloned appropriately using
tdata's pool.
ASTERISK-29411 #close
ASTERISK-29535 #close
Change-Id: I9852025b5ee93ce1c038209150ee9dba1e0767c5
There is work going on to update our OpenSSL usage to avoid the
deprecated functions but in the meantime make it possible to compile
in devmode.
Change-Id: Ib082eb8b3751f0185d8aa8fe127da664c93f0726
Change RTP timer behavior for detecting RTP only after two-way
SDP channel establishment. Ignore detecting after receiving 183
with SDP or while direct media is used.
Make rtp_timeout and rtp_timeout_hold options consistent to rtptimeout
and rtpholdtimeout options in chan_sip.
ASTERISK-26689 #close
ASTERISK-29929 #close
Change-Id: I07326d5b9c40f25db717fd6075f6f3a8d77279eb
Treat time_t's as entirely unique and use the POSIX API's for
converting to/from strings.
Lastly, a 64-bit integer formats as 20 digits at most in base10.
Don't need to have any 100 byte buffers to hold that.
ASTERISK-29674 #close
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Change-Id: Id7b25bdca8f92e34229f6454f6c3e500f2cd6f56
When asterisk generates the RLMI part of NOTIFY request,
the asterisk uses the local contact uri instead of the URI to which
the SUBSCRIBE request is sent.
Because of this mismatch some IP phones (for example Cisco 5XX) ignore
this list.
According
https://datatracker.ietf.org/doc/html/rfc4662#section-5.2
The first mandatory <list> attribute is "uri", which contains the uri
that corresponds to the list. Typically, this is the URI to which
the SUBSCRIBE request was sent.
https://datatracker.ietf.org/doc/html/rfc4662#section-5.3
The "uri" attribute identifies the resource to which the <resource>
element corresponds. Typically, this will be a SIP URI that, if
subscribed to, would return the state of the resource.
This patch makes asterisk to generate URI using SUBSCRIBE request URI.
ASTERISK-29961 #close
Change-Id: I1fcfc08fd589677f40608c59a4e143c45ee05f6c
Using the length of a file found on the filesystem rather than the
file being requested could result in filenames whose names are
substrings of another to be erroneously matched.
We now ensure a complete comparison before returning a positive
result.
ASTERISK-29960 #close
Change-Id: Id3ffc77681b9b75b8569062f3d952a128a21c71a
This patch makes the Resource List Subscriptions (RLS) dynamic.
The asterisk updates the current subscriptions to reflect the changes
to the list on the subscriptions refresh. If list items are added,
removed, updated or do not exist anymore, the asterisk regenerates
the resource list.
ASTERISK-29906 #close
Change-Id: Icee8c00459a7aaa43c643d77ce6f16fb7ab037d3
The XML documentation for the SET MUSIC AGI
command is invalid, as the parameter does not
have a name and the on/off enum options for
the on/off argument are listed separately, which
is incorrect. The cumulative effect of these currently
is that the Asterisk Wiki documentation for SET MUSIC
is broken and external documentation generators crash
on SET MUSIC due to the malformed documentation.
These issues are corrected so that the documentation
can be successfully parsed as with other similar AGI
commands.
ASTERISK-29939 #close
ASTERISK-28891 #close
Change-Id: I8c3d59897531bcbc401cbc7b00c9e2829dcb35f8
Omit "unsupported column type 'text'" warning in logs while
using text-type column in the PgSQL backend.
ASTERISK-29924 #close
Change-Id: I48061a7d469426859670db07f1ed8af1eb814712
Added the missing xml-stylesheet and Xinclude namespace
declarations in pjsip_config.xml and pjsip_manager.xml.
Updated make_xml_documentation to show detailed errors when
xmlstarlet is the validator. It's now run once with the '-q'
option to suppress harmless/expected messages and if it actually
fails, it's run again without '-q' but with '-e' to show
the actual errors.
Change-Id: I4bdc9d2ea6741e8d2e5eb82df60c68ccc59e1f5e
Moved the xmldoc build logic from the top-level Makefile into
its own script "make_xml_documentation" in the build_tools
directory.
Created a new utility script "get_sourceable_makeopts", also in
the build_tools directory, that dumps the top-level "makeopts"
file in a format that can be "sourced" from shell sscripts.
This allows scripts to easily get the values of common make
build variables such as the location of the GREP, SED, AWK, etc.
utilities as well as the AST* and library *_LIB and *_INCLUDE
variables.
Besides moving logic out of the Makefile, some optimizations
were done like removing "third-party" from the list of
subdirectories to be searched for documentation and changing some
assignments from "=" to ":=" so they're only evaluated once.
The speed increase is noticeable.
The makeopts.in file was updated to include the paths to
REALPATH and DIRNAME. The ./conifgure script was setting them
but makeopts.in wasn't including them.
So...
With this change, you can now place documentation in any"c"
source file AND you can now place it in a separate XML file
altogether. The following are examples of valid locations:
res/res_pjsip.c
Using the existing /*** DOCUMENTATION ***/ fragment.
res/res_pjsip/pjsip_configuration.c
Using the existing /*** DOCUMENTATION ***/ fragment.
res/res_pjsip/pjsip_doc.xml
A fully-formed XML file. The "configInfo", "manager",
"managerEvent", etc. elements that would be in the "c"
file DOCUMENTATION fragment should be wrapped in proper
XML. Example for "somemodule.xml":
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE docs SYSTEM "appdocsxml.dtd">
<docs>
<configInfo>
...
</configInfo>
</docs>
It's the "appdocsxml.dtd" that tells make_xml_documentation
that this is a documentation XML file and not some other XML file.
It also allows many XML-capable editors to do formatting and
validation.
Other than the ".xml" suffix, the name of the file is not
significant.
As a start... This change also moves the documentation that was
in res_pjsip.c to 2 new XML files in res/res_pjsip:
pjsip_config.xml and pjsip_manager.xml. This cut the number of
lines in res_pjsip.c in half. :)
Change-Id: I486c16c0b5a44d7a8870008e10c941fb19b71ade
Currently, each module that uses libcurl duplicates the standard
Asterisk curl user agent.
This adds a global macro for the Asterisk user agent used for
curl requests to eliminate this duplication.
ASTERISK-29861 #close
Change-Id: I9fc37935980384b4daf96ae54fa3c9adb962ed2d
If Subscription refresh occurred between when the batched notification
was scheduled and the serialized notification was to be sent,
then new schedule notification task would never be added.
There are 2 threads:
thread #1. ast_sip_subscription_notify is called,
if notification_batch_interval then call schedule_notification.
1.1. The schedule_notification checks notify_sched_id > -1
not true, then
send_scheduled_notify = 1
notify_sched_id =
ast_sched_add(sched, sub_tree->notification_batch_interval, sched_cb....
1.2. The sched_cb pushes task serialized_send_notify to serializer
and returns 0 which means no reschedule.
1.3. The serialized_send_notify checks send_scheduled_notify if it's false
the just returns. BUT notify_sched_id is still set, so no more ast_sched_add.
thread #2. pubsub_on_rx_refresh is called
2.1 it pushes serialized_pubsub_on_refresh_timeout to serializer
2.2. The serialized_pubsub_on_refresh_timeout calls pubsub_on_refresh_timeout
which calls send_notify
2.3. The send_notify set send_scheduled_notify = 0;
The serialized_send_notify should always unset notify_sched_id.
ASTERISK-29904 #close
Change-Id: Ifc50c00b213c396509e10326a1ed89d8cf8c7875
Whereas BLFs allow to show a display name for each RLS entry,
the asterisk provides only the extension now.
This is not end user friendly.
This commit adds a new resource_list option, resource_display_name,
to indicate whether display name of resource or the resource name being
provided for RLS entries.
If this option is enabled, the Display Name will be provided.
This option is disabled by default to remain the previous behavior.
If the 'event' set to 'presence' or 'dialog' the non-empty HINT name
will be set as the Display Name.
The 'message-summary' is not supported yet.
ASTERISK-29891 #close
Change-Id: Ic5306bd5a7c73d03f5477fe235e9b0f41c69c681
The configObject tag contains a default attribute which
allows the default value to be specified, if applicable.
This allows for the default value to show up specially on
the wiki in a way that is clear to users.
There are a couple places in the tree where default values
are included in the description as opposed to as attributes,
which means these can't be parsed specially for the wiki.
These are changed to use the attribute instead of being
included in the text description.
ASTERISK-29898 #close
Change-Id: I9d7ea08f50075f41459ea7b76654906b674ec755
added res_pjsip_outbound_registration to .requires in AST_MODULE_INFO
which fixes issue with module crashes on load "FRACK!, Failed assertion"
ASTERISK-29871
Change-Id: Ia0f49d048427a40e1b763296b834a52a03610096
In dev mode, if you call pjsip_auth_clt_deinit() with an auth_sess
that hasn't been initialized, it'll assert and abort. If
digest_create_request_with_auth() fails to find the proper
auth object however, it jumps to its cleanup which does exactly
that. So now we no longer attempt to call pjsip_auth_clt_deinit()
if we never actually initialized it.
ASTERISK-29888
Change-Id: Ib6171c25c9fe8e61cc8d11129e324c021bc30b62
Fixes some minor logic issues with the module:
Previously, the OPT_END_FILTER flag was getting
tested before options were parsed, so it could
never evaluate to true (wrong ordering).
Additionally, the initially parsed timeout (float)
needs to be compared with 0, not the result int
which is set afterwards (wrong variable).
ASTERISK-29857 #close
Change-Id: I0062bce3b391c15e5df7a714780eeaa96dd93d4c
When generating dtmfs, asterisk can incorrectly think packet loss
occured during the dtmf generation, resulting in a jump in sequence
numbers when forwarding voice frames resumes. This patch forces
asterisk to re-learn the expected sequence number after each DTMF
to avoid this
ASTERISK-29869 #close
Change-Id: Icc7de3d947b207b82c99d3c327af8095884df853
Previously there was no way to specify a connection timeout when
attempting to connect a websocket client to a server. This patch
makes it possible to now do such.
Change-Id: I5812f6f28d3d13adbc246517f87af177fa20ee9d
The code currently checks to see if an RFC3389
warning flag is set, except if it is, it merely
sets the flag again, the logic of which doesn't
make any sense.
This adjusts the if comparison to check if the
flag has NOT been set, and if so, emit a notice
log event and set the flag so that future frames
do not cause an event to be logged.
ASTERISK-29856 #close
Change-Id: Ib7098c947c63537d087a03b4646199fbb963f8e1
Neither pjsip_message_filter's filter_on_tx_message() nor
res_pjsip_session's session_outgoing_nat_hook() were multipart
aware and just assumed that an SDP would be the only thing in
a message body. Both were changed to use the new
pjsip_get_sdp_info() function which searches for an sdp in
both single- and multi- part message bodies.
ASTERISK-29813
Change-Id: I8f5b8cfdc27f1d4bd3e7491ea9090951a4525c56
Added two new functions to assist checking media types...
* ast_sip_are_media_types_equal compares two pjsip_media_types.
* ast_sip_is_media_type_in tests if one media type is in a list
of others.
Added static definitions for commonly used media types to
res_pjsip.h.
Changed several modules to use the new functions and static
definitions.
ASTERISK_29813
(not ready to close)
Change-Id: Ief77675235bd3bf00a6b095d4673fd878d0801b9
There are times when you need to troubleshoot issues with bundled
pjproject or add new features that need to be pushed upstream
but...
* The source directory created by extracting the pjproject tarball
is not scanned for code changes so you have to keep forcing
rebuilds.
* The source directory isn't a git repo so you can't easily create
patches, do git bisects, etc.
* Accidentally doing a make distclean will ruin your day by wiping
out the source directory, and your changes.
* etc.
This commit makes that easier.
See third-party/pjproject/README-hacking.md for the details.
ASTERISK-29824
Change-Id: Idb1251040affdab31d27cd272dda68676da9b268
The ast_rtp_codecs_payloads functions do not preserve the order in which
the payloads were specified on an incoming SDP media line. This leads to
a problem with the codec negotiation functionality, as the format
capabilities of the stream are extracted from the ast_rtp_codecs. This
commit moves the ast_rtp_codec to ast_format conversion to the place
where the order is still known.
ASTERISK-28863
ASTERISK-29320
Change-Id: I3aabcfed3f379c36654f59c1872c313d0cb57e25
res/res_rtp_asterisk.c: Adding 1 to rtpstart if it is deteremined
that rtpstart was configured to be an odd value. Also adding a loop
counter to prevent a possible infinite loop when looking for a free
port.
ASTERISK-27406
Change-Id: I90f07deef0716da4a30206e9f849458b2dbe346b
Newer versions of spandsp did refactoring of code to add new features
like color FAXing. This refactoring broke backwards compatibility.
Add support for the new version while retaining support for 0.0.6.
ASTERISK-29729 #close
Change-Id: I3bd74550604ebcf0304528d647fa39abc62fbaa1
Most examples in the XML documentation use the
example tag to demonstrate examples, which gets
parsed specially in the Wiki to make it easier
to follow for users.
This fixes a few modules to use the example
tag instead of vanilla para tags to bring them
in line with the standard syntax.
ASTERISK-29777 #close
Change-Id: I9acb6cc5faf1d220e73c6dd28592371d768d279b
Makes basic call progress tone detection available
in a tech-agnostic manner with the addition of the
ToneScan application. This can determine if the channel
has encountered a busy signal, SIT tones, dial tone,
modem, fax machine, etc. A few basic async progress
tone detect options are also added to the TONE_DETECT
function.
ASTERISK-29720 #close
Change-Id: Ia02437e0450473031e294798b8cb421fb8f24e90
Fixes four misuses of the parameter 'name'. Additionally, for
consistency and to avoid such an issue in future, those few other
places, which used '\file name', were changed just to '\file'. Then,
Doxygen uses the name of the current file.
ASTERISK-29733
Change-Id: I0c18b4c863c6988b138c77448057349a9ee7052d
Fix parsing of ANI2/OLI information, since it was previously
parsing the user, when it should have been parsing other_param.
Also improves the parsing by using pjproject native functions
rather than trying to parse the parameters ourselves like
chan_sip did. A previous attempt at this caused a crash, but
this works correctly now.
ASTERISK-29703 #close
Change-Id: I8f3c79032d9ea1a21d16f8e11f22bd8d887738a1
The stir_shaken configuration option now has 4 different choices to pick
from: off, attest, verify, and on. Off and on behave the same way they
do now. Attest will only perform attestation on the endpoint, and verify
will only perform verification on the endpoint.
Certain responses are required to be sent based on certain conditions
for STIR/SHAKEN. For example, if we get a Date header that is outside of
the time range that is considered valid, a 403 Stale Date response
should be sent. This and several other responses have been added.
Change-Id: I4ac1ecf652cd0e336006b0ca638dc826b5b1ebf7
Add a new function that converts a speech results type to a string.
Also add another function to unregister an engine, but returns a
pointer to the unregistered engine object instead of a success/fail
integer.
Change-Id: I0f7de17cb411021c09fb03988bc2b904e1380192
In res_pjsip_sdp_rtp, the bind_rtp_to_media_address option and the
fallback use of the transport's bind address solve problems sending
media on systems that cannot send ipv4 packets on ipv6 sockets, and
certain other situations. This change extends both of these behaviors
to UDPTL sessions as well in res_pjsip_t38, to fix fax-specific
problems on these systems, introducing a new option
endpoint/t38_bind_udptl_to_media_address.
ASTERISK-29402
Change-Id: I87220c0e9cdd2fe9d156846cb906debe08c63557
The behavior of max_contacts and remove_existing are connected. If
remove_existing is enabled, the soonest expiring contacts are removed.
This may occur when there is an unavailable contact. Similarly,
when remove_existing is not enabled, registrations from good
endpoints are rejected in favor of retaining unavailable contacts.
This commit adds a new AOR option remove_unavailable, and the effect
of this setting will depend on remove_existing. If remove_existing
is set to no, we will still remove unavailable contacts when they
exceed max_contacts, if there are any. If remove_existing is set to
yes, we will prioritize the removal of unavailable contacts before
those that are expiring soonest.
ASTERISK-29525
Change-Id: Ia2711b08f2b4d1177411b1be23e970d7fdff5784
sungtae kim
Mike Bradeen
Holger Hans Peter Freyther
Tinet-mucw
Vitezslav Novy
Sean Bright
Bastian Triller
MikeNaso
George Joseph
Naveen Albert
Maximilian Fridrich
zhengsh
Ben Ford
zhou_jiajian
Joe Searle
Sean Bright
Henning Westerholt
Jaco Kroon
cmaj
sungtae kim
George Joseph
Igor Goncharovsky
Alexandre Fournier
Joshua C. Colp
Michael Kuron
Marcel Wagner
Igor Goncharovsky
Philip Prindeville
Alexei Gradinari
Michael Neuhauser
Kevin Harwell
Jose Lopes
Boris P. Korzun
Trevor Peirce
Shloime Rosenblum
Moritz Fain
Thomas Guebels
Mark Petersen
Sean Bright
Torrey Searle
Luke Escude
Florentin Mayer
Alexander Traud
Dustin Marquess
Josh Soref
Matthew Kern
Jean Aunis
Joseph Nadiv