546 Commits (08a588e200e179593edd174f7bb7a831970fc978)

Author	SHA1	Message	Date
George Joseph	d1a1945967	options: Change ast_options from ast_flags to ast_flags64. ... DeveloperNote: The 32-bit ast_options has no room left to accomodate new options and so has been converted to an ast_flags64 structure. All internal references to ast_options have been updated to use the 64-bit flag manipulation macros. External module references to the 32-bit ast_options should continue to work on little-endian systems because the least-significant bytes of a 64 bit integer will be in the same location as a 32-bit integer. Because that's not the case on big-endian systems, we've swapped the bytes in the flags manupulation macros on big-endian systems so external modules should still work however you are encouraged to test.	3 months ago
Sean Bright	0f5ea4797e	res_pjsip: Fix empty `ActiveChannels` property in AMI responses. ... The logic appears to have been reversed since it was introduced in 05cbf8df. Resolves: #1254	5 months ago
Mark Murawski	51f9e1f1ba	chan_pjsip: Add the same details as PJSIPShowContacts to the CLI via 'pjsip show contact' ... CLI 'pjsip show contact' does not show enough information. One must telnet to AMI or write a script to ask Asterisk for example what the User-Agent is on a Contact This feature adds the same details as PJSIPShowContacts to the CLI Resolves: #643	7 months ago
Alexei Gradinari	ad178d155d	chan_pjsip: set correct Endpoint Device State on multiple channels ... 1. When one channel is placed on hold, the device state is set to ONHOLD without checking other channels states. In case of AST_CONTROL_HOLD set the device state as AST_DEVICE_UNKNOWN to calculate aggregate device state of all active channels. 2. The current implementation incorrectly classifies channels in use. The only channels that has the states: UP, RING and BUSY are considered as "in use". A channel should be considered "in use" if its state is anything other than DOWN or RESERVED. 3. Currently, if the number of channels "in use" is greater than device_state_busy_at, the system does not set the state to BUSY. Instead, it incorrectly assigns an aggregate device state. The endpoint device state should be BUSY if the number of channels "in use" is greater than or equal to device_state_busy_at. Fixes: #1181	7 months ago
Joshua Elson	53f3ac7925	fix: Correct default flag for tcp_keepalive_enable option ... Resolves an issue where the tcp_keepalive_enable option was not properly enabled in the sample configuration due to an incorrect default flag setting. Fixes: #1149	8 months ago
Sean Bright	e86f937e3a	docs: AMI documentation fixes. ... Most of this patch is adding missing PJSIP-related event documentation, but the one functional change was adding a sorcery to-string handler for endpoint's `redirect_method` which was not showing up in the AMI event details or `pjsip show endpoint <endpoint>` output. The rest of the changes are summarized below: * app_agent_pool.c: Typo fix Epoche -> Epoch. * stasis_bridges.c: Add missing AttendedTransfer properties. * stasis_channels.c: Add missing AgentLogoff properties. * pjsip_manager.xml: - Add missing AorList properties. - Add missing AorDetail properties. - Add missing ContactList properties. - Add missing ContactStatusDetail properties. - Add missing EventDetail properties. - Add missing AuthList properties. - Add missing AuthDetail properties. - Add missing TransportDetail properties. - Add missing EndpointList properties. - Add missing IdentifyDetail properties. * res_pjsip_registrar.c: Add missing InboundRegistrationDetail documentation. * res_pjsip_pubsub.c: - Add missing ResourceListDetail documentation. - Add missing InboundSubscriptionDetail documentation. - Add missing OutboundSubscriptionDetail documentation. * res_pjsip_outbound_registration.c: Add missing OutboundRegistrationDetail documentation.	8 months ago
Sean Bright	174006fcaa	docs: Indent <since> tags. ... Also updates the 'since' of applications/functions that existed before XML documentation was introduced (1.6.2.0).	9 months ago
George Joseph	ec22c1dd4d	res_pjsip: Fix startup/reload memory leak in config_auth. ... An issue in config_auth.c:ast_sip_auth_digest_algorithms_vector_init() was causing double allocations for the two supported_algorithms vectors to the tune of 915 bytes. The leak only happens on startup and when a reload is done and doesn't get bigger with the number of auth objects defined. * Pre-initialized the two vectors in config_auth:auth_alloc(). * Removed the allocations in ast_sip_auth_digest_algorithms_vector_init(). * Added a note to the doc for ast_sip_auth_digest_algorithms_vector_init() noting that the vector passed in should be initialized and empty. * Simplified the create_artificial_auth() function in pjsip_distributor. * Set the vector initialization count to 0 in config_global:global_apply().	9 months ago
George Joseph	2897d87a99	docs: Add version information to manager event instance XML elements ... * Do a git blame on the embedded XML managerEvent elements. * From the commit hash, grab the summary line. * Do a git log --grep <summary> to find the cherry-pick commits in all branches that match. * Do a git patch-id to ensure the commits are all related and didn't get a false match on the summary. * Do a git tag --contains <commit> to find the tags that contain each commit. * Weed out all tags not ..0. * Sort and discard any .0.0 and following tags where the commit appeared in an earlier branch. * The result is a single tag for each branch where the application or function was defined. The events defined in res/res_pjsip/pjsip_manager.xml were done by hand because the XML was extracted from the C source file relatively recently. Two bugs were fixed along the way... * The get_documentation awk script was exiting after it processed the first DOCUMENTATION block it found in a file. We have at least 1 source file with multiple DOCUMENTATION blocks so only the first one in them was being processed. The awk script was changed to continue searching rather than exiting after the first block. * Fixing the awk script revealed an issue in logger.c where the third DOCUMENTATION block contained a XML fragment that consisted only of a managerEventInstance element that wasn't wrapped in a managerEvent element. Since logger_doc.xml already existed, the remaining fragments in logger.c were moved to it and properly organized.	9 months ago
George Joseph	f70670841b	docs: Add version information to configObject and configOption XML elements ... Most of the configObjects and configOptions that are implemented with ACO or Sorcery now have `<since>/<version>` elements added. There are probably some that the script I used didn't catch. The version tags were determined by the following... * Do a git blame on the API call that created the object or option. * From the commit hash, grab the summary line. * Do a `git log --grep <summary>` to find the cherry-pick commits in all branches that match. * Do a `git patch-id` to ensure the commits are all related and didn't get a false match on the summary. * Do a `git tag --contains <commit>` to find the tags that contain each commit. * Weed out all tags not <major>.<minor>.0. * Sort and discard any <major>.0.0 and following tags where the commit appeared in an earlier branch. * The result is a single tag for each branch where the API was last touched. configObjects and configOptions elements implemented with the base ast_config APIs were just not possible to find due to the non-deterministic way they are accessed. Also note that if the API call was on modified after it was added, the version will be the one it was last modified in. Final note: The configObject and configOption elements were introduced in 12.0.0 so options created before then may not have any XML documentation.	9 months ago
Sean Bright	cede8a3e15	manager: Add `<since>` tags for all AMI actions.	10 months ago
George Joseph	a0987672f0	Add SHA-256 and SHA-512-256 as authentication digest algorithms ... * Refactored pjproject code to support the new algorithms and added a patch file to third-party/pjproject/patches * Added new parameters to the pjsip auth object: * password_digest = <algorithm>:<digest> * supported_algorithms_uac = List of algorithms to support when acting as a UAC. * supported_algorithms_uas = List of algorithms to support when acting as a UAS. See the auth object in pjsip.conf.sample for detailed info. * Updated both res_pjsip_authenticator_digest.c (for UAS) and res_pjsip_outbound_authentocator_digest.c (UAC) to suport the new algorithms. The new algorithms are only available with the bundled version of pjproject, or an external version > 2.14.1. OpenSSL version 1.1.1 or greater is required to support SHA-512-256. Resolves: #948 UserNote: The SHA-256 and SHA-512-256 algorithms are now available for authentication as both a UAS and a UAC.	10 months ago
Kent	0b30f546ba	res_pjsip: Add new AOR option "qualify_2xx_only" ... Added a new option "qualify_2xx_only" to the res_pjsip AOR qualify feature to mark a contact as available only if an OPTIONS request returns a 2XX response. If the option is not specified or is false, any response to the OPTIONS request marks the contact as available. UserNote: The pjsip.conf AOR section now has a "qualify_2xx_only" option that can be set so that only 2XX responses to OPTIONS requests used to qualify a contact will mark the contact as available.	10 months ago
George Joseph	85a9bce879	res_pjsip: Change suppress_moh_on_sendonly to OPT_BOOL_T ... The suppress_moh_on_sendonly endpoint option should have been defined as OPT_BOOL_T in pjsip_configuration.c and AST_BOOL_VALUES in the alembic script instead of OPT_YESNO_T and YESNO_VALUES. Also updated contrib/ast-db-manage/README.md to indicate that AST_BOOL_VALUES should always be used and provided an example. Resolves: #995	11 months ago
George Joseph	98510d4c75	res_pjsip: Add new endpoint option "suppress_moh_on_sendonly" ... Normally, when one party in a call sends Asterisk an SDP with a "sendonly" or "inactive" attribute it means "hold" and causes Asterisk to start playing MOH back to the other party. This can be problematic if it happens at certain times, such as in a 183 Progress message, because the MOH will replace any early media you may be playing to the calling party. If you set this option to "yes" on an endpoint and the endpoint receives an SDP with "sendonly" or "inactive", Asterisk will NOT play MOH back to the other party. Resolves: #979 UserNote: The new "suppress_moh_on_sendonly" endpoint option can be used to prevent playing MOH back to a caller if the remote end sends "sendonly" or "inactive" (hold) to Asterisk in an SDP.	12 months ago
George Joseph	3dfac27ef2	res_pjsip: Move tenantid to end of ast_sip_endpoint ... The tenantid field was originally added to the ast_sip_endpoint structure at the end of the AST_DECLARE_STRING_FIELDS block. This caused everything after it in the structure to move down in memory and break ABI compatibility. It's now at the end of the structure as an AST_STRING_FIELD_EXTENDED. Given the number of string fields in the structure now, the initial string field allocation was also increased from 64 to 128 bytes. Resolves: #982	12 months ago
Thomas Guebels	d1ed1018c4	pjsip_transport_events: handle multiple addresses for a domain ... The key used for transport monitors was the remote host name for the transport and not the remote address resolved for this domain. This was problematic for domains returning multiple addresses as several transport monitors were created with the same key. Whenever a subsystem wanted to register a callback it would always end up attached to the first transport monitor with a matching key. The key used for transport monitors is now the remote address and port the transport actually connected to. Fixes: #932	12 months ago
Thomas Guebels	03e08d5c33	pjsip_transport_events: Avoid monitor destruction ... When a transport is disconnected, several events can arrive following each other. The first event will be PJSIP_TP_STATE_DISCONNECT and it will trigger the destruction of the transport monitor object. The lookup for the transport monitor to destroy is done using the transport key, that contains the transport destination host:port. A reconnect attempt by pjsip will be triggered as soon something needs to send a packet using that transport. This can happen directly after a disconnect since ca Subsequent events can arrive later like PJSIP_TP_STATE_DESTROY and will also try to trigger the destruction of the transport monitor if not already done. Since the lookup for the transport monitor to destroy is done using the transport key, it can match newly created transports towards the same destination and destroy their monitor object. Because of this, it was sometimes not possible to monitor a transport after one or more disconnections. This fix adds an additional check on the transport pointer to ensure only a monitor for that specific transport is removed. Fixes: #923	12 months ago
George Joseph	1872abe672	security_agreements.c: Refactor the to_str functions and fix a few other bugs ... * A static array of security mechanism type names was created. * ast_sip_str_to_security_mechanism_type() was refactored to do a lookup in the new array instead of using fixed "if/else if" statments. * security_mechanism_to_str() and ast_sip_security_mechanisms_to_str() were refactored to use ast_str instead of a fixed length buffer to store the result. * ast_sip_security_mechanism_type_to_str was removed in favor of just referencing the new type name array. Despite starting with "ast_sip_", it was a static function so removing it doesn't affect ABI. * Speaking of "ast_sip_", several other static functions that started with "ast_sip_" were renamed to avoid confusion about their public availability. * A few VECTOR free loops were replaced with AST_VECTOR_RESET(). * Fixed a meomry leak in pjsip_configuration.c endpoint_destructor caused by not calling ast_sip_security_mechanisms_vector_destroy(). * Fixed a memory leak in res_pjsip_outbound_registration.c add_security_headers() caused by not specifying OBJ_NODATA in an ao2_callback. * Fixed a few ao2_callback return code misuses. Resolves: #845	1 year ago
Ben Ford	7990f6b589	channel: Add multi-tenant identifier. ... This patch introduces a new identifier for channels: tenantid. It's a stringfield on the channel that can be used for general purposes. It will be inherited by other channels the same way that linkedid is. You can set tenantid in a few ways. The first is to set it in the dialplan with the Set and CHANNEL functions: exten => example,1,Set(CHANNEL(tenantid)=My tenant ID) It can also be accessed via CHANNEL: exten => example,2,NoOp(CHANNEL(tenantid)) Another method is to use the new tenantid option for pjsip endpoints in pjsip.conf: [my_endpoint] type=endpoint tenantid=My tenant ID This is considered the best approach since you will be able to see the tenant ID as early as the Newchannel event. It can also be set using set_var in pjsip.conf on the endpoint like setting other channel variable: set_var=CHANNEL(tenantid)=My tenant ID Note that set_var will not show tenant ID on the Newchannel event, however. Tenant ID has also been added to CDR. It's read-only and can be accessed via CDR(tenantid). You can also get the tenant ID of the last channel communicated with via CDR(peertenantid). Tenant ID will also show up in CEL records if it has been set, and the version number has been bumped accordingly. Fixes: #740 UserNote: tenantid has been added to channels. It can be read in dialplan via CHANNEL(tenantid), and it can be set using Set(CHANNEL(tenantid)=My tenant ID). In pjsip.conf, it is recommended to use the new tenantid option for pjsip endpoints (e.g., tenantid=My tenant ID) so that it will show up in Newchannel events. You can set it like any other channel variable using set_var in pjsip.conf as well, but note that this will NOT show up in Newchannel events. Tenant ID is also available in CDR and can be accessed with CDR(tenantid). The peer tenant ID can also be accessed with CDR(peertenantid). CEL includes tenant ID as well if it has been set. UpgradeNote: A new versioned struct (ast_channel_initializers) has been added that gets passed to __ast_channel_alloc_ap. The new function ast_channel_alloc_with_initializers should be used when creating channels that require the use of this struct. Currently the only value in the struct is for tenantid, but now more fields can be added to the struct as necessary rather than the __ast_channel_alloc_ap function. A new option (tenantid) has been added to endpoints in pjsip.conf as well. CEL has had its version bumped to include tenant ID.	1 year ago
George Joseph	a45e5ebf8d	security_agreement.c: Always add the Require and Proxy-Require headers ... The `Require: mediasec` and `Proxy-Require: mediasec` headers need to be sent whenever we send `Security-Client` or `Security-Verify` headers but the logic to do that was only in add_security_headers() in res_pjsip_outbound_register. So while we were sending them on REGISTER requests, we weren't sending them on INVITE requests. This commit moves the logic to send the two headers out of res_pjsip_outbound_register:add_security_headers() and into security_agreement:ast_sip_add_security_headers(). This way they're always sent when we send `Security-Client` or `Security-Verify`. Resolves: #789	1 year ago
George Joseph	80839ce954	Revert "res_pjsip_endpoint_identifier_ip: Add endpoint identifier transport address." ... This reverts PR #602 Resolves: #GHSA-qqxj-v78h-hrf9	1 year ago
Sperl Viktor	7c3e2cfda9	res_pjsip_endpoint_identifier_ip: Add endpoint identifier transport address. ... Add a new identify_by option to res_pjsip_endpoint_identifier_ip called 'transport' this matches endpoints based on the bound ip address (local) instead of the 'ip' option, which matches on the source ip address (remote). UserNote: set identify_by=transport for the pjsip endpoint. Then use the existing 'match' option and the new 'transport' option of the identify. Fixes: #672	2 years ago
Sperl Viktor	136bd5c892	res_pjsip_endpoint_identifier_ip: Endpoint identifier request URI ... Add ability to match against PJSIP request URI. UserNote: this new feature let users match endpoints based on the indound SIP requests' URI. To do so, add 'request_uri' to the endpoint's 'identify_by' option. The 'match_request_uri' option of the identify can be an exact match for the entire request uri, or a regular expression (between slashes). It's quite similar to the header identifer. Fixes: #599	2 years ago
Joshua Elson	3d40d34271	Implement Configurable TCP Keepalive Settings in PJSIP Transports ... This commit introduces configurable TCP keepalive settings for both TCP and TLS transports. The changes allow for finer control over TCP connection keepalives, enhancing stability and reliability in environments prone to connection timeouts or where intermediate devices may prematurely close idle connections. This has proven necessary and has already been tested in production in several specialized environments where access to the underlying transport is unreliable in ways invisible to the operating system directly, so these keepalive and timeout mechanisms are necessary. Fixes #657	2 years ago
George Joseph	e6c7f1aee0	Stir/Shaken Refactor ... Why do we need a refactor? The original stir/shaken implementation was started over 3 years ago when little was understood about practical implementation. The result was an implementation that wouldn't actually interoperate with any other stir-shaken implementations. There were also a number of stir-shaken features and RFC requirements that were never implemented such as TNAuthList certificate validation, sending Reason headers in SIP responses when verification failed but we wished to continue the call, and the ability to send Media Key(mky) grants in the Identity header when the call involved DTLS. Finally, there were some performance concerns around outgoing calls and selection of the correct certificate and private key. The configuration was keyed by an arbitrary name which meant that for every outgoing call, we had to scan the entire list of configured TNs to find the correct cert to use. With only a few TNs configured, this wasn't an issue but if you have a thousand, it could be. What's changed? * Configuration objects have been refactored to be clearer about their uses and to fix issues. * The "general" object was renamed to "verification" since it contains parameters specific to the incoming verification process. It also never handled ca_path and crl_path correctly. * A new "attestation" object was added that controls the outgoing attestation process. It sets default certificates, keys, etc. * The "certificate" object was renamed to "tn" and had it's key change to telephone number since outgoing call attestation needs to look up certificates by telephone number. * The "profile" object had more parameters added to it that can override default parameters specified in the "attestation" and "verification" objects. * The "store" object was removed altogther as it was never implemented. * We now use libjwt to create outgoing Identity headers and to parse and validate signatures on incoming Identiy headers. Our previous custom implementation was much of the source of the interoperability issues. * General code cleanup and refactor. * Moved things to better places. * Separated some of the complex functions to smaller ones. * Using context objects rather than passing tons of parameters in function calls. * Removed some complexity and unneeded encapsuation from the config objects. Resolves: #351 Resolves: #46 UserNote: Asterisk's stir-shaken feature has been refactored to correct interoperability, RFC compliance, and performance issues. See https://docs.asterisk.org/Deployment/STIR-SHAKEN for more information. UpgradeNote: The stir-shaken refactor is a breaking change but since it's not working now we don't think it matters. The stir_shaken.conf file has changed significantly which means that existing ones WILL need to be changed. The stir_shaken.conf.sample file in configs/samples/ has quite a bit more information. This is also an ABI breaking change since some of the existing objects needed to be changed or removed, and new ones added. Additionally, if res_stir_shaken is enabled in menuselect, you'll need to either have the development package for libjwt v1.15.3 installed or use the --with-libjwt-bundled option with ./configure.	2 years ago
Sean Bright	0fdaf7fc80	res_pjsip_session.c: Correctly format SDP connection addresses. ... Resolves a regression identified by @justinludwig involving the rendering of IPv6 addresses in outgoing SDP. Also updates `media_address` on PJSIP endpoints so that if we are able to parse the configured value as an IP we store it in a format that we can directly use later. Based on my reading of the code it appeared that one could configure `media_address` as: ``` [foo] type = endpoint ... media_address = [2001:db8::] ``` And that value would be blindly copied into the outgoing SDP without regard to its format. Fixes #541	2 years ago
Naveen Albert	8f5581b0d0	general: Fix broken links. ... This fixes a number of broken links throughout the tree, mostly caused by wiki.asterisk.org being replaced with docs.asterisk.org, which should eliminate the need for sporadic fixes as in f28047db36. Resolves: #430	2 years ago
Sean Bright	26918d05f4	doc: Update IP Quality of Service links. ... Fixes #328	2 years ago
Naveen Albert	8d9d0d3738	res_pjsip: Include cipher limit in config error message. ... If too many ciphers are specified in the PJSIP config, include the maximum number of ciphers that may be specified in the user-facing error message. Resolves: #396	2 years ago
Sean Bright	9d329da346	pjsip_configuration.c: Disable DTLS renegotiation if WebRTC is enabled. ... Per RFC8827: Implementations MUST NOT implement DTLS renegotiation and MUST reject it with a "no_renegotiation" alert if offered. So we disable it when webrtc=yes is set. Fixes #378 UpgradeNote: The dtls_rekey will be disabled if webrtc support is requested on an endpoint. A warning will also be emitted.	2 years ago
sungtae kim	f89e56c178	res_pjsip: Expanding PJSIP endpoint ID and relevant resource length to 255 characters ... This commit introduces an extension to the endpoint and relevant resource sizes for PJSIP, transitioning from its current 40-character constraint to a more versatile 255-character capacity. This enhancement significantly overcomes limitations related to domain qualification and practical usage, ultimately delivering improved functionality. In addition, it includes adjustments to accommodate the expanded realm size within the ARI, specifically enhancing the maximum realm length. Resolves: #345 UserNote: With this update, the PJSIP realm lengths have been extended to support up to 255 characters. UpgradeNote: As part of this update, the maximum allowable length for PJSIP endpoints and relevant resources has been increased from 40 to 255 characters. To take advantage of this enhancement, it is recommended to run the necessary procedures (e.g., Alembic) to update your schemas.	2 years ago
Mike Bradeen	933490b758	res_pjsip: update qualify_timeout documentation with DNS note ... The documentation on qualify_timeout does not explicitly state that the timeout includes any time required to perform any needed DNS queries on the endpoint. If the OPTIONS response is delayed due to the DNS query, it can still render an endpoint as Unreachable if the net time is enough for qualify_timeout to expire. Resolves: #352	2 years ago
Sean Bright	b5762cd54e	res_pjsip: Enable TLS v1.3 if present. ... Fixes #221 UserNote: res_pjsip now allows TLS v1.3 to be enabled if supported by the underlying PJSIP library. The bundled version of PJSIP supports TLS v1.3.	2 years ago
Sean Bright	b7eae29fb9	pjsip_transport_events.c: Use %zu printf specifier for size_t. ... Partially resolves #143.	2 years ago
Maximilian Fridrich	f3cc1e7fbd	res_pjsip: mediasec: Add Security-Client headers after 401 ... When using mediasec, requests sent after a 401 must still contain the Security-Client header according to draft-dawes-sipcore-mediasec-parameter. Resolves: #48	3 years ago
Sean Bright	96d9ad51ac	doxygen: Fix doxygen errors. ... Change-Id: Ic50e95b4fc10f74ab15416d908e8a87ee8ec2f85	3 years ago
Naveen Albert	a1da8042d1	res_pjsip_session: Add overlap_context option. ... Adds the overlap_context option, which can be used to explicitly specify a context to use for overlap dialing extension matches, rather than forcibly using the context configured for the endpoint. ASTERISK-30262 #close Change-Id: Ibbcd4a8b11402428a187fb56b8d4e7408774a0db	3 years ago
Michael Kuron	fee9012fe1	res_pjsip_aoc: New module for sending advice-of-charge with chan_pjsip ... chan_sip supported sending AOC-D and AOC-E information in SIP INFO messages in an "AOC" header in a format that was originally defined by Snom. In the meantime, ETSI TS 124 647 introduced an XML-based AOC format that is supported by devices from multiple vendors, including Snom phones with firmware >= 8.4.2 (released in 2010). This commit adds a new res_pjsip_aoc module that inserts AOC information into outgoing messages or sends SIP INFO messages as described below. It also fixes a small issue in res_pjsip_session which didn't always call session supplements on outgoing_response. * AOC-S in the 180/183/200 responses to an INVITE request * AOC-S in SIP INFO (if a 200 response has already been sent or if the INVITE was sent by Asterisk) * AOC-D in SIP INFO * AOC-D in the 200 response to a BYE request (if the client hangs up) * AOC-D in a BYE request (if Asterisk hangs up) * AOC-E in the 200 response to a BYE request (if the client hangs up) * AOC-E in a BYE request (if Asterisk hangs up) The specification defines one more, AOC-S in an INVITE request, which is not implemented here because it is not currently possible in Asterisk to have AOC data ready at this point in call setup. Once specifying AOC-S via the dialplan or passing it through from another SIP channel's INVITE is possible, that might be added. The SIP INFO requests are sent out immediately when the AOC indication is received. The others are inserted into an appropriate outgoing message whenever that is ready to be sent. In the latter case, the XML is stored in a channel variable at the time the AOC indication is received. Depending on where the AOC indications are coming from (e.g. PRI or AMI), it may not always be possible to guarantee that the AOC-E is available in time for the BYE. Successfully tested AOC-D and both variants of AOC-E with a Snom D735 running firmware 10.1.127.10. It does not appear to properly support AOC-S however, so that could only be tested by inspecting SIP traces. ASTERISK-21502 #close Reported-by: Matt Jordan <mjordan@digium.com> Change-Id: Iebb7ad0d5f88526bc6629d3a1f9f11665434d333	3 years ago
Marcel Wagner	58534b309f	res_pjsip: Fix typo in from_domain documentation ... This fixes a small typo in the from_domain documentation on the endpoint documentation ASTERISK-30328 #close Change-Id: Ia6f0897c3f5cab899ef2cde6b3ac07265b8beb21	3 years ago
George Joseph	7684c9e907	pjsip_transport_events: Fix possible use after free on transport ... It was possible for a module that registered for transport monitor events to pass in a pjsip_transport that had already been freed. This caused pjsip_transport_events to crash when looking up the monitor for the transport. The fix is a two pronged approach. 1. We now increment the reference count on pjsip_transports when we create monitors for them, then decrement the count when the transport is going to be destroyed. 2. There are now APIs to register and unregister monitor callbacks by "transport key" which is a string concatenation of the remote ip address and port. This way the module needing to monitor the transport doesn't have to hold on to the transport object itself to unregister. It just has to save the transport_key. * Added the pjsip_transport reference increment and decrement. * Changed the internal transport monitor container key from the transport->obj_name (which may not be unique anyway) to the transport_key. * Added a helper macro AST_SIP_MAKE_REMOTE_IPADDR_PORT_STR() that fills a buffer with the transport_key using a passed-in pjsip_transport. * Added the following functions: ast_sip_transport_monitor_register_key ast_sip_transport_monitor_register_replace_key ast_sip_transport_monitor_unregister_key and marked their non-key counterparts as deprecated. * Updated res_pjsip_pubsub and res_pjsip_outbound_register to use the new "key" monitor functions. NOTE: res_pjsip_registrar also uses the transport monitor functionality but doesn't have a persistent object other than contact to store a transport key. At this time, it continues to use the non-key monitor functions. ASTERISK-30244 Change-Id: I1a20baf2a8643c272dcf819871d6c395f148f00b	3 years ago
Henning Westerholt	12445040d3	res_pjsip: return all codecs on a re-INVITE without SDP ... Currently chan_pjsip on receiving a re-INVITE without SDP will only return the codecs that are previously negotiated and not offering all enabled codecs. This causes interoperability issues with different equipment (e.g. from Cisco) for some of our customers and probably also in other scenarios involving 3PCC infrastructure. According to RFC 3261, section 14.2 we SHOULD return all codecs on a re-INVITE without SDP The PR proposes a new parameter to configure this behaviour: all_codecs_on_empty_reinvite. It includes the code, documentation, alembic migrations, CHANGES file and example configuration additions. ASTERISK-30193 #close Change-Id: I69763708d5039d512f391e296ee8a4d43a1e2148	3 years ago
Maximilian Fridrich	0d2e140123	res_pjsip: Add mediasec capabilities. ... This patch adds support for mediasec SIP headers and SDP attributes. These are defined in RFC 3329, 3GPP TS 24.229 and draft-dawes-sipcore-mediasec-parameter. The new features are implemented so that a backbone for RFC 3329 is present to streamline future work on RFC 3329. With this patch, Asterisk can communicate with Deutsche Telekom trunks which require these fields. ASTERISK-30032 Change-Id: Ia7f5b5ba42db18074fdd5428c4e1838728586be2	3 years ago
Maximilian Fridrich	5bbad0d27c	res_pjsip: Add 100rel option "peer_supported". ... This patch adds a new option to the 100rel parameter for pjsip endpoints called "peer_supported". When an endpoint with this option receives an incoming request and the request indicated support for the 100rel extension, then Asterisk will send 1xx responses reliably. If the request did not indicate 100rel support, Asterisk sends 1xx responses normally. ASTERISK-30158 Change-Id: Id6d95ffa8f00dab118e0b386146e99f254f287ad	3 years ago
Ben Ford	881a3f2306	res_pjsip: Add TEL URI support for basic calls. ... This change allows TEL URI requests to come through for basic calls. The allowed requests are INVITE, ACK, BYE, and CANCEL. The From and To headers will now allow TEL URIs, as well as the request URI. Support is only for TEL URIs present in traffic from a remote party. Asterisk does not generate any TEL URIs on its own. ASTERISK-26894 Change-Id: If5729e6cd583be7acf666373bf9f1b9d653ec29a	3 years ago
Joshua C. Colp	a0713a9f70	pjsip: Add TLS transport reload support for certificate and key. ... This change adds support using the pjsip_tls_transport_restart function for reloading the TLS certificate and key, if the filenames remain unchanged. This is useful for Let's Encrypt and other situations. Note that no restart of the transport will occur if the certificate and key remain unchanged. ASTERISK-30186 Change-Id: I9bc95a6bf791830a9491ad9fa43c17d4010028d0	3 years ago
Naveen Albert	c654486547	general: Improve logging levels of some log messages. ... Adjusts some logging levels to be more or less important, that is more prominent when actual problems occur and less prominent for less noteworthy things. ASTERISK-30153 #close Change-Id: Ifc8f7df427aa018627db462125ae744986d3261b	3 years ago
Michael Neuhauser	37c16f9eef	res_pjsip: delay contact pruning on Asterisk start ... Move the call to ast_sip_location_prune_boot_contacts() *after* the call to ast_res_pjsip_init_options_handling() so that res/res_pjsip/pjsip_options.c is informed about the contact deletion and updates its sip_options_contact_statuses list. This allows for an AMI event to be sent by res/res_pjsip/pjsip_options.c if the endpoint registers again from the same remote address and port (i.e., same URI) as used before the Asterisk restart. ASTERISK-30109 Reported-by: Michael Neuhauser Change-Id: I1ba4478019e4931a7085f62708d9b66837e901a8	3 years ago
George Joseph	1fa568e76f	Geolocation: chan_pjsip Capability Preview ... This commit adds res_pjsip_geolocation which gives chan_pjsip the ability to use the core geolocation capabilities. This commit message is intentionally short because this isn't a simple capability. See the documentation at https://wiki.asterisk.org/wiki/display/AST/Geolocation for more information. THE CAPABILITIES IMPLEMENTED HERE MAY CHANGE BASED ON USER FEEDBACK! ASTERISK-30128 Change-Id: Ie2e2bcd87243c2cfabc43eb823d4427c7086f4d9	3 years ago
Kevin Harwell	a3b2daf127	res_pjsip: allow TLS verification of wildcard cert-bearing servers ... Rightly the use of wildcards in certificates is disallowed in accordance with RFC5922. However, RFC2818 does make some allowances with regards to their use when using subject alt names with DNS name types. As such this patch creates a new setting for TLS transports called 'allow_wildcard_certs', which when it and 'verify_server' are both enabled allows DNS name types, as well as the common name that start with '*.' to match as a wildcard. For instance: *.example.com will match for: foo.example.com Partial matching is not allowed, e.g. f*.example.com, foo.*.com, etc... And the starting wildcard only matches for a single level. For instance: *.example.com will NOT match for: foo.bar.example.com The new setting is disabled by default. ASTERISK-30072 #close Change-Id: If0be3fdab2e09c2a66bb54824fca406ebaac3da4	3 years ago