Don't know why it seemed to work during testing, but it really is needed
for protocol v17 (and probably above).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381470 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fix chan_skinny so that it respects callerID presentation of inbound calls to
device and a couple of other minor fixes: 145 packet (add OCTAL_FROM amd callerid),
and dont send dialednumber message if protocol >= 17.
(closes issue ASTERISK-21066)
Reported by: snuffy
Tested by: snuffy, myself
Patches:
skinny-respect-clid-restrictions-v2.diff uploaded by snuffy (license 5024)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381465 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add extra string to transmit_callinfo_var, Only set string2 to tonum for outgoing calls
and changes to send_callinfo and push_callinfo to not set callid name to last number.
(closes issue ASTERISK-21063)
Reported by: wedhorn
Tested by: snuffy, myself
Patches:
skinny-callinfoupdate03.diff uploaded by wedhorn (license 5019)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381195 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Patch ensures that d->activeline and l->activesub are moved over to the
new device and line so that on callend the appropriate subs can be found
to complete hangup before device resets.
(closes issue ASTERISK-16610)
Reported by: wedhorn
Tested by: snuffy, myself
Patches:
skinny-reloadactive01.diff uploaded by wedhorn (license 5019)
........
Merged revisions 380942 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380943 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Make skinny reset vmexten and immeddial to '\0' on reload to ensure that
it is set to '\0' if the appropriate item is removed/commented in
skinny.conf. Also small fix re immeddial char in skinny.conf and add
immedial setting to skinny show settings.
(closes issue ASTERISK-21037)
Reported by: snuffy
Tested by: snuffy, myself
Patches:
immed_dial_fix.diff uploaded by snuffy (license 5024)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380925 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add new variable length displayprompt packet (0x0145) to skinny. Uses the new
packet if the device is reporting protocol versions >= 17.
Add the use of octal codes for sending prompts to both the new and old
displayprompt messages (also cleaned up soft_key_template_default to use the
defined octal codes).
Review: https://reviewboard.asterisk.org/r/2294/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380792 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add packet 0x014A (variable length call info messages) to skinny for newer
firmware. Plenty of unknown information but includes the equivalent functionality
as the fixed size callinfo packet already included.
Only send this packet if protocol reported is >= 17.
Review: https://reviewboard.asterisk.org/r/2290/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380755 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds a dial softkey when the device is in DAFD. The softkey is greyed (unusable)
until a possible dialplan match is entered. Code includes updating
transmit_selectsoftkeys to allow the use of a button mask. Also add option
to use # or * as a dial now button. Original patch by snuffy cleaned up by myself.
Review: https://reviewboard.asterisk.org/r/2277/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380057 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Skinny device call logging (ie missed, place and received calls) has issues
because the incorrect sequence of callstates is/can be sent to the device.
This patch removes some extra callstate updates driven by forces external
to skinny and ensures the needed intermediary callstate messages are sent.
(closes issue ASTERISK-20964)
Reported by: wedhorn
Tested by: snuffy, myself
Patches:
ast11-skinny-calllog01.diff uploaded by wedhorn (license 5019)
........
Merged revisions 379677 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@379678 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk maintains an internal cache for devices in the event subsystem. The
device state cache holds the state of each device known to Asterisk, such that
consumers of device state information can query for the last known state for
a particular device, even if it is not part of an active call. The concept of
a device in Asterisk can include entities that do not have a physical
representation. One way that this occurred was when anonymous calls are allowed
in Asterisk. A device was automatically created and stored in the cache for
each anonymous call that occurred; this was possible in the SIP and IAX2
channel drivers and through channel drivers that utilized the
res_jabber/res_xmpp resource modules (Gtalk, Jingle, and Motif). These devices
are never removed from the system, allowing anonymous calls to potentially
exhaust a system's resources.
This patch changes the event cache subsystem and device state management to
no longer cache devices that are not associated with a physical entity.
(issue ASTERISK-20175)
Reported by: Russell Bryant, Leif Madsen, Joshua Colp
Tested by: kmoore
patches:
event-cachability-3.diff uploaded by jcolp (license 5000)
........
Merged revisions 378303 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378320 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 378321 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@378322 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fixup the vmexten so if globally set in general section will be honored by
chan_skinny. Also get rid of the 'global_' part of variable name to match
regexten.
(closes issue ASTERISK-20790)
Reported by: snuffy
Tested by: snuffy, myself
Patches:
skinny-vm.diff uploaded by snuffy (license 5024)
........
Merged revisions 378010 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@378011 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Review the syntax of the 'skinny debug' command to show more than
just 'show' for options to 'skinny debug' command.
(closes issue ASTERISK-20789)
Reported by: snuffy
Tested by: snuffy, myself
Patches:
skinny-debug.diff uploaded by snuffy (license 5024)
........
Merged revisions 377985 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@377986 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Update and extend the configuration_file group and enable linking. Update title that was left behind many years ago.
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375006 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Debugging messages and associated controls only compiled in if configured with --enable-dev-mode. Debug messages provide more detail (including thread id) and are grouped so the user/dev can limit the type of messages displayed. Functionally no real change to chan_skinny.
Review: https://reviewboard.asterisk.org/r/2040/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370881 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added test to skinny_register to only allow device to register against
a device that is not already registered.
Addback l->device test for skinny_show_lines. Fixes segfault if a line
is configured but not configured to a device. Reverses part of r368680.
Removed redundant l->device tests in subsubstate and dumpsub. l->device
will always be valid if these routines are called. Reverses 368948 -
discussed with mjordan on irc.
Some indentation cleanup.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369034 65c4cc65-6c06-0410-ace0-fbb531ad65f3
AST-2012-008 (r367844) fixed a denial of service attack exploitable in the
Skinny channel driver that occurred when certain messages are sent after a
previously registered station sends an Off Hook message. Unresolved in that
patch is an issue in the Asterisk 10 releases, wherein, if a Station Key
Pad Button Message is processed after an Off Hook message, the channel driver
will inappropriately dereference a NULL pointer.
This patch fixes those places where the message handling or the channel
callback functions would attempt to dereference the line's pointer to the
device.
(issue ASTERISK-19905)
Reported by: Christoph Hebeisen
Tested by: mjordan, Christoph Hebeisen
Patches:
AST-2012-009-10.diff uploaded by mjordan (license 6283)
........
Merged revisions 368947 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368948 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Original was testing for d->session, setting and testing again (all nested).
Removed duplicate testing and restructured function to test/return and then
the main code.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368681 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Removed d->registered which was mirroring d->session. Changed relevant
references to use d->session instead.
Moved setting and unsetting of l->device from session register to device
configuration. As such, l->device will always be valid unless it is has not
been configured to a device. Revised various test where checking if a device
is registered to use l->device->session.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368680 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Presence support has been added. This is accomplished by
allowing for presence hints in addition to device state
hints. A dialplan function called PRESENCE_STATE has been
added to allow for setting and reading presence. Presence
can be transmitted to Digium phones using custom XML
elements in a PIDF presence document.
Voicemail has new APIs that allow for moving, removing,
forwarding, and playing messages. Messages have had a new
unique message ID added to them so that the APIs will work
reliably. The state of a voicemail mailbox can be obtained
using an API that allows one to get a snapshot of the mailbox.
A voicemail Dialplan App called VoiceMailPlayMsg has been
added to be able to play back a specific message.
Configuration hooks have been added. Configuration hooks
allow for a piece of code to be executed when a specific
configuration file is loaded by a specific module. This is
useful for modules that are dependent on the configuration
of other modules.
chan_sip now has a public method that allows for a custom
SIP INFO request to be sent mid-dialog. Digium phones use
this in order to display progress bars when files are played.
Messaging support has been expanded a bit. The main
visible difference is the addition of an AMI action
MessageSend.
Finally, a ParkingLots manager action has been added in order
to get a list of parking lots.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368435 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a skinny session is unregistered, the corresponding device pointer is set
to NULL in the channel private data. If the client was not in the on-hook state
at the time the connection was closed, the device pointer can later be
dereferened if a message or channel event attempts to use a line's pointer to
said device.
The patches prevent this from occurring by checking the line's pointer in
message handlers and channel callbacks that can fire after an unregistration
attempt.
(closes issue ASTERISK-19905)
Reported by: Christoph Hebeisen
Tested by: mjordan, Damien Wedhorn
Patches:
AST-2012-008-1.8.diff uploaded by mjordan (license 6283)
AST-2012-008-10.diff uploaded by mjordan (licesen 6283)
........
Merged revisions 367844 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367845 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is the starting point for the Asterisk 11: Who Hung Up work and provides
a framework which will allow channel drivers to report the types of hangup
cause information available in SIP_CAUSE without incurring the overhead of the
MASTER_CHANNEL dialplan function. The initial implementation only includes
cause generation for chan_sip and does not include cause code translation
utilities.
This change deprecates SIP_CAUSE and replaces its method of reporting cause
codes with the new framework. This change also deprecates the 'storesipcause'
option in sip.conf.
Review: https://reviewboard.asterisk.org/r/1822/
(Closes issue SWP-4221)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366408 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When handling a keypad button message event, the received digit is placed into
a fixed length buffer that acts as a queue. When a new message event is
received, the length of that buffer is not checked before placing the new digit
on the end of the queue. The situation exists where sufficient keypad button
message events would occur that would cause the buffer to be overrun. This
patch explicitly checks that there is sufficient room in the buffer before
appending a new digit.
(closes issue ASTERISK-19592)
Reported by: Russell Bryant
........
Merged revisions 363100 from http://svn.asterisk.org/svn/asterisk/branches/1.6.2
........
Merged revisions 363102 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 363103 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@363105 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fixes up softkey endcall. Previous code was a copy of onhook, now
allows for endcall softkey to be used while device is still onhook.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353224 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Continue channel opaque-ification by wrapping all of the stringfields.
Eventually, we will restrict what can actually set these variables, but
the purpose for now is to hide the implementation and keep people from
adding code that directly accesses the channel structure. Semantic
changes will follow afterward.
Review: https://reviewboard.asterisk.org/r/1661/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352348 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are many benefits to making the ast_channel an opaque handle, from
increasing maintainability to presenting ways to kill masquerades. This patch
kicks things off by taking things a field at a time, renaming the field to
'__do_not_use_${fieldname}' and then writing setters/getters and converting the
existing code to using them. When all fields are done, we can move ast_channel
to a C file from channel.h and lop off the '__do_not_use_'.
This patch sets up main/channel_interal_api.c to be the only file that actually
accesses the ast_channel's fields directly. The intent would be for any API
functions in channel.c to use the accessor functions. No more monkeying around
with channel internals. We should use our own APIs.
The interesting changes in this patch are the addition of
channel_internal_api.c, the moving of the AST_DATA stuff from channel.c to
channel_internal_api.c (note: the AST_DATA stuff will have to be reworked to
use accessor functions when ast_channel is really opaque), and some re-working
of the way channel iterators/callbacks are handled so as to avoid creating fake
ast_channels on the stack to pass in matching data by directly accessing fields
(since "name" is a stringfield and the fake channel doesn't init the
stringfields, you can't use the ast_channel_name_set() function). I went with
ast_channel_name(chan) for a getter, and ast_channel_name_set(chan, name) for a
setter.
The majority of the grunt-work for this change was done by writing a semantic
patch using Coccinelle ( http://coccinelle.lip6.fr/ ).
Review: https://reviewboard.asterisk.org/r/1655/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350223 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fix a segfault if an attempt to answer a call is made between when
the inbound call gives up (and the channel is removed) and when the
device is notified and removes the call from the device.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@347490 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a simple switch was started on a device and then a specific call
made (such as redial or speed dial), on timeout of the simple switch
the call would be attempted again. This patch only allows the simple
switch to make a call if the substate is still in the collecting
digits mode.
Also added small debug message to dialAndAactivate sub.
Tested by snuff and myself.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@340973 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added some data to skinny packet structures to make compatible
with v17. Added protocolversion to device, set on registration
based on the version provided by device.
v17 includes some increased ip space for ip6. This patch increases
ip space in the packets but still only uses ip4. Some packet
structures duplicated (ip4 and ip6 types). ip4 type used unless
version is greater or equal to 17.
Tested by snuff and myself on 7961 with recent 8.5 firmware. Also
tested compatible with old 7960 and older 30VIPs.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@340071 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Increase SKINNY_MAX_PACKET to 2000 bytes to handle some messages
in v17 that are greater than the old 1000 bytes. Also add some
useful logging regarding packet and session handling.
A device (with protocol v17) was sending a packet with length
greater than 1000 which resulted in the TCP session being
destroyed and registration being retryed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@340070 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r340031 | wedhorn | 2011-10-10 09:18:27 +1100 (Mon, 10 Oct 2011) | 8 lines
Return -1 to skinny_session if register rejected.
If device registration is rejected, return -1 so that the session is
destroyed immediately. Previously, a segfault would occur on a
graceful shutdown if a register is rejected and the skinny_session
has not yet timed out.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@340032 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r339992 | wedhorn | 2011-10-10 08:09:12 +1100 (Mon, 10 Oct 2011) | 9 lines
Remove log message on traverse session list.
On destroying a session, a list of sessions is traversed to find the
matching session. For each session not matching, skinny erroneously
logged that the session was not matched. While technically correct
the message was misleading, and tended to indicate errors that
were not there.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@339993 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There was an issue that the cap and confcap pointers for each line and device
were being memcpy'd so they all pointed to the same ast_format_cap. On
destroying, a segfault occured on the second call to the same struct.
skinny reload now works again as well.
Tested by snuff and myself.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@339680 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r335078 | mjordan | 2011-09-09 11:27:01 -0500 (Fri, 09 Sep 2011) | 29 lines
Merged revisions 335064 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r335064 | mjordan | 2011-09-09 11:09:09 -0500 (Fri, 09 Sep 2011) | 23 lines
Updated SIP 484 handling; added Incomplete control frame
When a SIP phone uses the dial application and receives a 484 Address
Incomplete response, if overlapped dialing is enabled for SIP, then
the 484 Address Incomplete is forwarded back to the SIP phone and the
HANGUPCAUSE channel variable is set to 28. Previously, the Incomplete
application dialplan logic was automatically triggered; now, explicit
dialplan usage of the application is required.
Additionally, this patch adds a new AST_CONTOL_FRAME type called
AST_CONTROL_INCOMPLETE. If a channel driver receives this control frame,
it is an indication that the dialplan expects more digits back from the
device. If the device supports overlap dialing it should attempt to
notify the device that the dialplan is waiting for more digits; otherwise,
it can handle the frame in a manner appropriate to the channel driver.
(closes issue ASTERISK-17288)
Reported by: Mikael Carlsson
Tested by: Matthew Jordan
Review: https://reviewboard.asterisk.org/r/1416/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@335079 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Autoanswer added to skinny based on incoming chan var SKINNY_AUTOANSWER.
Initial value must be the time to autoanswer in ms, then optionally :BEEP
to play a tone when answered and :MUTE to mute the mic when answering.
eg 3000:MUTE:BEEP will ring for 3 secs, then answer, mute the mic, and
play a beep. just 3000 would answer afer 3 secs of ringing with no
beep and full two way audio.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@322544 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The do_monitor seemed to be there for task scheduling and network monitoring. However, the network monitoring has a dedicated thread so the ast_io_wait was basically just a usleep as it didn't actually seem to be monitoring anything.
Review: https://reviewboard.asterisk.org/r/1256/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@322381 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Probably haven't been working for a couple of years. May still need
some more love, but they are now working, both as a hint device and
monitoring a hint. Changes centre around the long ago change
to remove the requirement for a device name in a skinny line, and
changes to the transmit_* functions.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@319316 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When called, activatesub first cleans up the active sub and then
handles the sub passed. dialandactivatesub first sets sub->exten
and then calls activatesub. Revise handle_offhook to utilise the
callid sent to chan_skinny. Some other minor fixes especially around
d->hookstate (which still needs some more work).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@319024 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There were some issues where if a simple switch was cancelled and a
new switch started before the first had timed out where the d->exten
would be used for both subchannels. This was bad leading to possible
invalid extensions if some digits had been entered in the abandoned
simple switch and the second one was completed before the first timed
out, or the second would be cancelled because d->exten would be set to
nothing on the time out of the first.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318833 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Consolidate the functions and add some debugging info. Allows to be
able to set a substate without explicitly knowing what the state is.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318635 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add the setsubstate_onhook to complete the initial substate handling
procedures. Added dumpsub(sub, forcehangup) which is the common way of
calling setsubstate_onhook. Dumpsub attempts to activate another sub
after setting the current one onhook.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318600 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a call is made to a line that already has a call and the device is
offhook (ie activeish call), the call is set to CALLWAIT rather than RINGIN.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318106 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Long time coming, finally moving the hookstate from line to device.
This may fix some issues where a device has multiple lines. Previously
we had to run through all lines on a device to see if it was actually
onhook or not.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@317996 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r317478 | russell | 2011-05-05 17:53:45 -0500 (Thu, 05 May 2011) | 12 lines
Fix some consistency issues with jitterbuffer config.
Store the defaults noted in the sample config files in the jitterbuffer config
data structure. This makes the CLI commands that output these settings show
the right thing. Also only show the settings that are relevant in the settings
CLI commands, based on which jitterbuffer is selected and whether it's enabled.
(closes issue #19083)
Reported by: rgagnon
Patches:
issue-19083-trunk-r313139.diff uploaded by rgagnon (license 1202)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@317479 65c4cc65-6c06-0410-ace0-fbb531ad65f3
skinny_hold moved to setsubstate_hold and skinny_unhold integrated into
setsubstate_connected. Removed sub->onhold and replaced with
SUBSTATE_HOLD.
Also fixed inbound call answering by queueing an AST_CONTROL_ANSWER on
answering a SUBSTATE_RINGIN sub (was a typo).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@317382 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Move handling of both state handling from skinny_indicate to it's own sub.
Also, modified behaviour to not hangup the sub and let the dialplan
have a chance in doing what it wants for congestion. Added various states to
substate2str and added these states where applicable for other set_substate_
procs.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@317026 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Move handling of setting busy state from skinny_indicate to it's own sub.
Also, modified behaviour to not hangup the sub and let the dialplan
have a chance in doing what it wants (eg busy(10); hangup() in the dialplan
now gives a busy indication for 10 secs and then hangs up.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@316994 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Renamed previous setsubstate_ringout to setsubstate_dialing for a state
when attempting to dial a number, substate ringout now for when core
has indicated that the channel is actually ringing on the other end.
Also added substate2str for debugging purposes.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@316885 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added setsubstate_ringin. skinny_call now calls sss_ringin rather than inline.
Fixed previous issue so that setsubstate_connected now use SUBSTATE_RINGIN
to determine is an AST_CONTROL_ANSWER should be queued.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@316584 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Cosolidated the code so that skinny_answer now uses the setsubstate procedures
rather than doing the handling inline.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@316552 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Cosolidated the working out of the callinfo to be sent into
transmit_callinfo. Replaced ambiguous sub->outgoing with calldirection
which can be SKINNY_INCOMING or SKINNY_OUTGOING (same value as the
skinny protocol).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@316519 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r314628 | mnicholson | 2011-04-21 13:24:05 -0500 (Thu, 21 Apr 2011) | 27 lines
Merged revisions 314620 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r314620 | mnicholson | 2011-04-21 13:22:19 -0500 (Thu, 21 Apr 2011) | 20 lines
Merged revisions 314607 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r314607 | mnicholson | 2011-04-21 13:19:21 -0500 (Thu, 21 Apr 2011) | 14 lines
Added limits to the number of unauthenticated sessions TCP based protocols are allowed to have open simultaneously. Also added timeouts for unauthenticated sessions where it made sense to do so.
Unrelated, the manager interface now properly checks if the user has the "system" privilege before executing shell commands via the Originate action.
AST-2011-005
AST-2011-006
(closes issue #18787)
Reported by: kobaz
(related to issue #18996)
Reported by: tzafrir
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@314666 65c4cc65-6c06-0410-ace0-fbb531ad65f3
-Functional changes
1. Dynamic global format list build by codecs defined in codecs.conf
2. SILK 8khz, 12khz, 16khz, and 24khz with custom attributes defined in codecs.conf
3. Negotiation of SILK attributes in chan_sip.
4. SPEEX 32khz with translation
5. SLINEAR 8khz, 12khz, 24khz, 32khz, 44.1khz, 48khz, 96khz, 192khz with translation
using codec_resample.c
6. Various changes to RTP code required to properly handle the dynamic format list
and formats with attributes.
7. ConfBridge now dynamically jumps to the best possible sample rate. This allows
for conferences to take advantage of HD audio (Which sounds awesome)
8. Audiohooks are no longer limited to 8khz audio, and most effects have been
updated to take advantage of this such as Volume, DENOISE, PITCH_SHIFT.
9. codec_resample now uses its own code rather than depending on libresample.
-Organizational changes
Global format list is moved from frame.c to format.c
Various format specific functions moved from frame.c to format.c
Review: https://reviewboard.asterisk.org/r/1104/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@308582 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the foundation of an entire new way of looking at media in Asterisk.
The code present in this patch is everything required to complete phase1 of my
Media Architecture proposal. For more information about this project visit the link below.
https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal
The primary function of this patch is to convert all the usages of format
bitfields in Asterisk to use the new format and format_cap APIs. Functionally
no change in behavior should be present in this patch. Thanks to twilson
and russell for all the time they spent reviewing these changes.
Review: https://reviewboard.asterisk.org/r/1083/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously, I had added the ast_sched_thread stuff that was a generic scheduler
thread implementation. However, if you used it, it required using different
functions for modifying scheduler contents. This patch reworks how this is
done and just allows you to optionally start a thread on the original scheduler
context structure that has always been there. This makes it trivial to switch
to the generic scheduler thread implementation without having to touch any of
the other code that adds or removes scheduler entries.
In passing, I made some naming tweaks to add ast_ prefixes where they were not
there before.
Review: https://reviewboard.asterisk.org/r/1007/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@299091 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Consolidates all offhook (new call with dialtone) to setsubstate_offhook. This should be roughly equivalent to existing code, although a couple of calls now run through the full offhook sequence rather than an abbreviated one.
(closes issue #17812)
Reported by: wedhorn
Patches:
cleanup.stateoffhook.diff uploaded by wedhorn (license 30)
Tested by: salecha, wedhorn
Review: NA
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@282701 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Cleaned up handling of onhook indications and added indications if more than one sub on device. Also fixes issue in 12324 so that the phone can call itself without locking up.
(closes issue #17692)
Reported by: jmhunter
Patches:
chan_skinny-transfer-v4.txt uploaded by DEA (license 3)
skinnytransfver.v8.diff uploaded by wedhorn (license 30)
Tested by: jmhunter, salecha, wedhorn
Review: NA
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@281257 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Move call answering stuff into new setsubstate_connected. Also add sub->substate var and set it to SUBSTATE_CONNECTED in setsubstate_connected.
(closes issue #17772)
Reported by: wedhorn
Patches:
cleanup.stateconnected2.diff uploaded by wedhorn (license 30)
Tested by: wedhorn, salecha
Review: NA
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@281227 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Moved inline packet sending to transmit_ subs. Removed handle_keep_alive and handle_register_message to inline in handle_message. Also moved transmit_response(d) to transmit_response_bysessions(s) and created a wrapper transmit_response(d) that calls transmit_response_bysession(d->session).
(closes issue #16980)
Reported by: wedhorn
Patches:
skinny-clean06b.diff uploaded by wedhorn (license 30)
Tested by: wedhorn, DEA
Review: NA
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@280589 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ACLs can now be configured to match IPv6 networks. This is only
relevant for ACLs in chan_sip for now since other channel drivers
do not support IPv6 addressing. However, once those channel drivers
are outfitted to support IPv6 addressing, the ACLs will already be
ready for IPv6 support.
https://reviewboard.asterisk.org/r/791
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277814 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The purpose of this patch is to eliminate struct ast_callerid since it has
turned into a miscellaneous collection of various party information.
Eliminate struct ast_callerid and replace it with the following struct
organization:
struct ast_party_name {
char *str;
int char_set;
int presentation;
unsigned char valid;
};
struct ast_party_number {
char *str;
int plan;
int presentation;
unsigned char valid;
};
struct ast_party_subaddress {
char *str;
int type;
unsigned char odd_even_indicator;
unsigned char valid;
};
struct ast_party_id {
struct ast_party_name name;
struct ast_party_number number;
struct ast_party_subaddress subaddress;
char *tag;
};
struct ast_party_dialed {
struct {
char *str;
int plan;
} number;
struct ast_party_subaddress subaddress;
int transit_network_select;
};
struct ast_party_caller {
struct ast_party_id id;
char *ani;
int ani2;
};
The new organization adds some new information as well.
* The party name and number now have their own presentation value that can
be manipulated independently. ISDN supplies the presentation value for
the name and number at different times with the possibility that they
could be different.
* The party name and number now have a valid flag. Before this change the
name or number string could be empty if the presentation were restricted.
Most channel drivers assume that the name or number is then simply not
available instead of indicating that the name or number was restricted.
* The party name now has a character set value. SIP and Q.SIG have the
ability to indicate what character set a name string is using so it could
be presented properly.
* The dialed party now has a numbering plan value that could be useful to
have available.
The various channel drivers will need to be updated to support the new
core features as needed. They have simply been converted to supply
current functionality at this time.
The following items of note were either corrected or enhanced:
* The CONNECTEDLINE() and REDIRECTING() dialplan functions were
consolidated into func_callerid.c to share party id handling code.
* CALLERPRES() is now deprecated because the name and number have their
own presentation values.
* Fixed app_alarmreceiver.c write_metadata(). The workstring[] could
contain garbage. It also can only contain the caller id number so using
ast_callerid_parse() on it is silly. There was also a typo in the
CALLERNAME if test.
* Fixed app_rpt.c using ast_callerid_parse() on the channel's caller id
number string. ast_callerid_parse() alters the given buffer which in this
case is the channel's caller id number string. Then using
ast_shrink_phone_number() could alter it even more.
* Fixed caller ID name and number memory leak in chan_usbradio.c.
* Fixed uninitialized char arrays cid_num[] and cid_name[] in
sig_analog.c.
* Protected access to a caller channel with lock in chan_sip.c.
* Clarified intent of code in app_meetme.c sla_ring_station() and
dial_trunk(). Also made save all caller ID data instead of just the name
and number strings.
* Simplified cdr.c set_one_cid(). It hand coded the ast_callerid_merge()
function.
* Corrected some weirdness with app_privacy.c's use of caller
presentation.
Review: https://reviewboard.asterisk.org/r/702/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276347 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Damien Wedhorn
Matthew Jordan
Mark Michelson
Andrew Latham
Kinsey Moore
Sean Bright
Terry Wilson
Walter Doekes
Richard Mudgett
Tilghman Lesher
Leif Madsen
Russell Bryant
Matthew Nicholson
David Vossel
Paul Belanger
Jason Parker