asterisk

Commit Graph

Author	SHA1	Message	Date
Jason Parker	22d58fbea8	Fix comparison of presence state in event subsystem. Several new IEs were not given types (or names), causing the comparison function to improperly succeed. This adds those. (closes issue AST-1128) ........ Merged revisions 382390 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382391 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kevin Harwell	933800754f	Confbridge CLI new record file name check. This fix checks to make sure that if a confbridge record start command is issued from the CLI it will always use the file name given on the CLI even if it changes between start/stop records for a conference. Previously it had been reusing the same file between start/stops even if a new filename was given. (issue AST-1088) Reported by: John Bigelow ........ Merged revisions 382385 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382386 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Joshua Colp	a4f45a2c95	Add support for registering a sorcery handler which supports multiple fields using a regex. Review: https://reviewboard.asterisk.org/r/2332/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382340 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Michael L. Young	a3ad8b28e6	Fix / Clean Up Some Items To Handle The New auto_* NAT Options The original report had to do with a realtime peer behind NAT being pruned and the peer's private address being used instead of its external address. Upon debugging, it was discovered that this was being caused by the addition of the auto_force_rport and auto_comedia settings. This patch does the following: * Adds a missing note to the CHANGES file indicating that the default global nat setting is auto_force_rport * Constify the 'req' parameter for check_via() * Add calls to check_via() in a couple of places in order for the auto_* settings to do their job in attempting to determine if NAT is involved * Set the flags SIP_NAT_FORCE_RPORT and SIP_PAGE2_SYMMETRICRTP if the auto_* settings are in use where it was needed * Moves the copying of peer flags up in build_peer() to before they are used; this fixes the realtime prune issue * Update the contrib/realtime schemas to allow the nat column to handle the different nat setting combinations we have This patch received a review and "Ship It!" on the issue itself. (closes issue ASTERISK-20904) Reported by: JoshE Tested by: JoshE, Michael L. Young Patches: asterisk-20904-nat-auto-and-rt-peersv2.diff Michael L. Young (license 5026) ........ Merged revisions 382322 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382323 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Joshua Colp	3a8caa351e	While the ICE negotiation is occurring leave strictrtp in an open state, media can and will come from different places. ........ Merged revisions 382298 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382299 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Joshua Colp	50a74cbd2a	Fix a bug with ICE and strictrtp where media could get dropped. If the end result of the ICE negotiation resulted in the path for media changing it was possible for the strictrtp code to discard the RTP packets. This change causes strictrtp to enter learning mode once again when the ICE negotiation has completed successfully. ........ Merged revisions 382296 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382297 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	855bb334c8	threadpool: Make ast_threadpool_push() return -1 if shutting_down git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382295 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	e2832f18bc	threadpool: Whitespace and comment corrections. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382294 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Jason Parker	6acc9ceb76	Don't undefine bzero()/bcopy(). This was causing build failures against external libraries that happened to use them, unless silly hacks were added to the modules that used those headers. Review: https://reviewboard.asterisk.org/r/2359/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382292 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	1a34b465bc	Prevent deadlock in chan_iax2 when attempting to set caller ID A deadlock can occur in chan_iax2 when it attempts to set the caller ID, as it already holds the iax2 private lock and improperly fails to obtain the channel lock before calling ast_set_callerid. By not safely obtaining the channel lock, a locking inversion can take place, causing a deadlock. This patch solves this by calling the required deadlock avoidance functions that obtain the channel lock before setting the caller ID. Thanks to Pavel for fixing my syntax errors and testing this patch out. (closes issue ASTERISK-21128) Reported by: Pavel Troller Tested by: Pavel Troller patches: ASTERISK-21128-1.8.diff uploaded by mjordan (license 6283) ASTERISK-21128-modified-1.8.diff uploaded by Pavel Troller (license 6302) ........ Merged revisions 382233 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 382234 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382236 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	62f7acfac6	Let channels joining a MeetMe conference opt out of the denoiser For some channel drivers, specifically those that have a varying rate in the number of audio samples, the audio quality for a MeetMe conference can be exceedingly poor. This is due to a unilateral application of the DENOISE function in func_speex to channels joining the conference. The denoiser function in the speex library is initialized with the number of audio samples in each sample that will be provided to it. If the number of audio samples changes, the denoiser has to be thrown away and re-initialized. While this could be worked around by removing func_speex, that doesn't help if you actually use the denoiser with other channels on the system. This patches does the following: * Checks for the presence of func_speex as opposed to codec_speex when determining if the DENOISE function is present (which is where the function is actually implemented) * Adds an option to MeetMe 'n' that causes the denoiser to not be applied to a channel when it joins. This keeps the current behavior the default, but let's users disable the denoiser if it causes problems on their system. Review: https://reviewboard.asterisk.org/r/2358 (closes issue AST-1062) Reported by: Thomas Arimont ........ Merged revisions 382227 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 382230 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382232 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	de90681293	More places to eliminate the cast to argv but were not giving warnings. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382204 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	31f08344ee	Fix compiler warning by eliminating the need for a cast. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382203 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Joshua Colp	e0b49e7331	Relax dialog checking in get_sip_pvt_byid_locked so it works when the dialog is forked. (closes issue ASTERISK-20638) Reported by: eelcob Patches: pedantic-call-pickup-from-tag.patch uploaded by eelcob (license 6442) ........ Merged revisions 382171 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 382174 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382182 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Tzafrir Cohen	d6a6422880	Consider linux-gnuspe as linux-gnu * The powerpcspe Linux port uses linux-gnuspe as the OS string. * Our build system shouldn't really care for that, so just call it linux-gnu. * Original report: Roland Stigge , http://bugs.debian.org/701505 Review: https://reviewboard.asterisk.org/r/2357/ ........ Merged revisions 382110 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 382111 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382113 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Walter Doekes	d33d9c1781	Correct RPID parsing for unquoted display-name. Parsing Remote-Party-ID will now succeed if display-name is of the *(token LWS) kind and not just the quoted-string kind. Review: https://reviewboard.asterisk.org/r/2341/ ........ Merged revisions 382107 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 382108 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382109 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Tzafrir Cohen	4951ab9ed1	Remove unneeded linux-gnueabi* As of r380522 the configure scripts converts the value of linux-gnueabi* of OSARCH to "linux-gnu". So no point in testing for those values. ........ Merged revisions 382087 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 382096 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382106 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	35f98d66ac	Clean up ConfBridge commands to account for wait_marked users When ConfBridge was refactored to better handle the concept of marked, wait_marked, and normal users co-existing in a conference (thereby implementing a state machine for the conference), the wait_marked users were put into their own list of conference participants, separate from the active users. This list is used for wait_marked users when they are waiting in a conference but no marked user has joined; normal users may have joined at this point however. There are several AMI/CLI commands that affect conference users that were not checking the wait_marked users list: * CLI/AMI commands that mute/unmute a participant. In this case, wait_marked users have to remain in their particular state and should not be affected - however, the commands would return "Channel not found" as opposed to the appropriate error condition. * CLI/AMI commands that kick a participant. An admin should always be able to kick a participant out of the conference. This patch fixes both sets of commands, and cleans up the CLI commands slightly by allowing them to complete a participant name (this was supposed to have been added, but the function call was commented out and wasn't implemented). Review: https://reviewboard.asterisk.org/r/2346/ (closes issue AST-1114) Reported by: John Bigelow Tested by: John Bigelow ........ Merged revisions 382068 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382070 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	33e4c6115f	Ensure that the default bridge/user profiles are always available ConfBridge and Page require that there always be a default bridge and user profile available. While properties of the default profiles can be overriden in the configuration file, removing them can create situations where neither application can function properly. This patch ensures that if an administrator removes the profiles from the confbridge.conf configuration file, the profiles are added upon load. Documentation clarifying this has been added to the confbridge.conf.sample file. Review: https://reviewboard.asterisk.org/r/2356/ (closes issue AST-1115) Reported by: John Bigelow Tested by: John Bigelow ........ Merged revisions 382066 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382067 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	9ad3e219c4	Clean up use of va_end/va_args in res_config_mysql There were several problems using variadic argument macros in res_config_mysql. * Improper use of va_end. Multiple calls to va_end were possible resulting in an unbalanced matching of va_start/va_end. * Calls to va_arg after a possible encounter of a SENTINEL value. This patch corrects those errors. (closes issue ASTERISK-19451) Reported by: wdoekes patches: ASTERISK-19451-1.8--2.diff uploaded by wdoekes (License 5674) ........ Merged revisions 382021 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 382022 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382023 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Damien Wedhorn	b34479ad37	More called details fixup for skinny. Basically sets the callerid and callername to the first device talked to for the purposes of putting the the calls made log on the device. Does not affect the device displaying who the device is currently talking to. Also some minor changes to use sub->exten in lieu of l->lastnumberdialed. (closes issue ASTERISK-21095) Reported by: wedhorn Tested by: snuffy, myself Patches: skinny-calllogsoutbound03.diff uploaded by wedhorn (license 5019) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382008 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Damien Wedhorn	0928f45794	Add prinotify messages to skinny. Adds both fixed and variable prinotify messages and clearprinotify messages to skinny. Also adds cli function for pushing messages to devices. i Initial code by snuffy, expanded by myself to include fixed messages. (closes issue ASTERISK-21091) Reported by: snuffy Tested by: snuffy, myself Patches: skinny-prinotify02.diff uploaded by wedhorn (license 5019) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382007 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	f6abcce7c1	Set the sin_family on the bind address socket during initialization Somehow, chan_jingle has managed to operate for years without setting the sin_family on its bindaddr socket. This patch properly sets the field during initial module load to AF_INET. Note that the patch on the issue was modified slightly to change the initialization of the socket from allocation of a chan_jingle private to the module initialization, as the bindaddr object (which is static) only needs to have the address set once. (closes issue ASTERISK-19341) Reported by: andre valentin patches: 0105-chan_jingle.patch uploaded by avalentin (License 6064) ........ Merged revisions 381975 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 381976 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381977 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	182098ba96	Don't display the AMI ALL class authorization for users if they don't have it When converting AMI class authorizations to a string representation, the method always appends the ALL class authorization. This is especially important for events, as they should always communicate that class authorization - even if the event itself does not specify ALL as a class authorization for itself. (Events have always assumed that the ALL class authorization is implied when they are raised) Unfortunately, this did mean that specifying a user with restricted class authorizations would show up in the 'manager show user' CLI command as having the ALL class authorization. Rather then modifying the existing string manipulation function, this patch adds a function that will only return a string if the field being compared explicitly matches class authorization field it is being compared against. This prevents ALL from being returned unless it is actually specified for the user. (closes issue ASTERISK-20397) Reported by: Johan Wilfer ........ Merged revisions 381939 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 381943 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381949 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	2df01ab32b	Make ParkAndAnnounce return to priority + 1 when return context is not defined The ParkAndAnnounce application documentation for the optional return_context parameter states the following: return_context The goto-style label to jump the call back into after timeout. Default 'priority+1'. Unfortunately, the application was sending the channel back into the dialplan at 'priority', which is the ParkAndAnnounce application call. This causes an infinite loop of the channel constantly being parked, announced, timed out, parked, announced, timed out... while fun, especially for those callers you wish to drive to the end of madness, this was not the intent of the application. (closes issue ASTERISK-20113) Reported by: serginuez patches: app_parkandannounce.diff uploaded by serginuez (License 6405) ........ Merged revisions 381916 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 381917 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381918 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Michael L. Young	e9bcf9826a	Fix FastAGI To Properly Check For A Connection When IPv6 support was added to FastAGI, the intent was to have the ability to check all addresses resolved for a host since we might receive an IPv4 address and an IPv6 address. The problem with the current code, is that, since we are doing O_NONBLOCK, we get EINPROGRESS when calling ast_connect() but are ignoring this instead of handling it. We break out of the loop and continue on. When we later call ast_poll(), it succeeds but we never check if we have a connection or not on the socket level. We then attempt to send data to the host address that we think is setup and it fails. We then check the errno and see that we have "connection refused" and then return with agi failed. This patch does the following: * Handles EINPROGRESS by creating the function handle_connection() - ast_poll() was moved into this function - This function checks the results of the connection on the socket level after calling ast_poll() * Continues to the next address if the above fails to create a connection * Once all addresses resolved are tried and we still are unable to establish a connection, then we return that the FastAGI call failed (closes issue ASTERISK-21065) Reported by: Jeremy Kister Tested by: Jeremy Kister, Michael L. Young Patches: asterisk-21065_poll_correctly_v4.diff Michael L. Young (license 5026) Review: https://reviewboard.asterisk.org/r/2330/ ........ Merged revisions 381893 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381894 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Jonathan Rose	abfb23df6b	app_dial: Honor the 'c' flag when the calling party hangs up Apparently this feature became broken in 11, probably as a result of the Hangup Cause project. (closes issue ASTERISK-21113) Reprted by: Heiko Wundram Patches: app_dial.patch uploaded by Heiko Wundram (license 5822) ........ Merged revisions 381880 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381881 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	a3b138429f	Properly detect launchd Asterisk was a little too pro-active in claiming that it found launchd. On systems without launchd - such as FreeBSD - this resulted in certain items in Asterisk that conflict with launchd to not be selectable, such as res_timing_kqueue. (closes issue ASTERISK-20749) Reported by: Oleg Baranov ........ Merged revisions 381847 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 381848 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381869 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kevin Harwell	5e9994ed9c	Write the correct callid to the data1 field in queue_log for transfer events. The incorrect callid was being written to the "data1" field in queue_log table for transfer events. The callid of the queue was being written instead of the transfer target's callid. This now gets the correct "transfer to" number and places that in the "data1" field of the queue_log table when a transfer event is triggered. (closes issue ASTERISK-19960) Reported by: vladimir shmagin ........ Merged revisions 381770 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 381791 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381792 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Michael L. Young	d1f8e338b0	Add The Status Of A Module To The Output Of "CLI> module show" When a module's configuration is not loadable, we still load the module but it is not in a running state. When trying to troubleshoot, let's say, why chan_motif is ignoring inbound XMPP traffic, there is no way to indicate that a loaded module is not currently running. (closes issue ASTERISK-21108) Reported by: Rusty Newton Tested by: Michael L. Young Patches: asterisk-21108_add_status-v2.diff Michael L. Young (license 5026) Review: https://reviewboard.asterisk.org/r/2331/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381749 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kevin Harwell	f277460670	Confbridge channels staying active when all participants leave. If you started/stopped recording of a conference multiple times channels would remain active even when all participants left the conference. This was due to the fact that a reference to the confbridge was being added every time a start record command was issued, but when the recording was stopped there was no matching de-reference thus keeping the conference alive. Made sure only a single reference is added for the record thread no matter how many times recording is started/stopped. A de-reference is issued upon thread ending. Note, this issue is being fixed under AST-1088 since it relates to it and should have been corrected along with those modifications. (issue AST-1088) Reported by: John Bigelow ........ Merged revisions 381737 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381741 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kevin Harwell	31b7426115	Added Confbridge record_file_append option. Currently, if one starts, stops, and then starts a recording again for a conference the recorded data is appended to the file originally created on the first record start. An option record_file_append has been added that defaults to "yes", but when set to "no" will force creation of a new file between every record start/stop. (issue AST-1088) Reported by: John Bigelow Review: http://reviewboard.digium.internal/r/374/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381729 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Damien Wedhorn	0d553eece8	Add serviceURL stuff to skinny. Patch adds all the packet and structure stuff to skinny to enable setting service URLs in skinny, such as corporate directories. This stuff is only relevant during load/unload as when activated. Also some minor changes removing duplicated counting of addons and speedials in handle_skinny_show_devices. Review: https://reviewboard.asterisk.org/r/2321/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381718 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Damien Wedhorn	96025d5dfc	Fixup skinny CLI completion. Auto complete for skinny debug allows multiple options and negation, also add debug all option. Usage example: 'skinny debug all -packets' (each can be autocompleted including -packet). Change show device to use device name. Remove the duplicate ast_strdup's from place calling device complete return immediately from complete devicename and complete linename so that multiple options are displayed on the CLI if more than one option available. Review: https://reviewboard.asterisk.org/r/2333/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381717 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kevin Harwell	4c76dbc8b2	Fixed Confbridge file recording deadlock and appending. A deadlock occurred after starting/stopping and then restarting a confbridge recording. Upon starting a recording a record thread is created that holds a lock until just before exiting. Stopping the recording does not stop/exit the thread or release the lock. The thread waits until recording begins again. Starting a stopped recording signals the thread to continue and start recording again. However restarting the recording also created another record thread resulting in a deadlock. The fix was to make sure the record thread was only created once. Also it was noted that filenames for the recordings were being concatenated for each start/stop. This was fixed by creating a new file for each conference session and appending the actual recorded data within the file (e.g. passing the 'a' option to MixMonitor). (issue AST-1088) Reported by: John Bigelow Review: http://reviewboard.digium.internal/r/374/ ........ Merged revisions 381702 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381703 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Walter Doekes	d4d1d10307	Remove "registertrying" and add "rtp_engine" from/to sip.conf.sample The "registertrying" option was removed in r343220. The "rtp_engine" option was added in r186078 but erroneously named "engine" in the sample. Note that there is no global sip setting for a different engine. ........ Merged revisions 381668 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 381669 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381670 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Jonathan Rose	d7a616c945	PRESENCE_STATE: Provide better documentation for the 'e' option. Notes that the 'e' option actually decodes data when used as a write function such as with the SET application while it encodes data when used to read. Review: https://reviewboard.asterisk.org/r/2335/ ........ Merged revisions 381655 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381656 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	aac24e03aa	confbridge: Add flags column to CLI "confbridge list <conference>" * Added the following flags to the CLI "confbridge list <conference>" output: A - The user is an admin M - The user is a marked user W - The user must wait for a marked user to join E - The user will be kicked after the last marked user leaves the conference w - The user is waiting for a marked user to join * Added the following header to the AMI ConfbridgeList events: WaitMarked, EndMarked, and Waiting. (closes issue AST-1101) Reported by: John Bigelow Patches: confbridge-show-admin3.txt (license #5091) patch uploaded by John Bigelow Modified git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381644 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	041f958e38	confbridge: Rename i iterator variables to iter. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381628 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	2ebb9863ea	Don't send presencestate information if the state is invalid Previously, presencestate information was sent whenever the state was not NOT_SET. When r381594 actually returned INVALID presence state in all the places it was supposed to, it caused chan_sip to start adding presence state information to NOTIFY requests that it previously would not have added. chan_sip shouldn't be adding presence state information when the provider is in an invalid state; users can't set the state to invalid and an invalid state always implies that the provider is in an error condition. (issue AST-1084) ........ Merged revisions 381613 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381615 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Joshua Colp	cce1c9547f	Add support for retrieving multiple objects from sorcery using a regex on their id. Review: https://reviewboard.asterisk.org/r/2329/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381614 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	c209e85ad3	Fix crash in PresenceState AMI action when specifying an invalid provider This patch fixes a crash in Asterisk that could be caused by using the PresenceState AMI action while providing an invalid provider. This patch also adds some additional warnings when a user attempts to provide the PresenceState action with invalid data, and removes some NOTICE statements that were still lurking in the code from testing. (closes issue AST-1084) Reported by: John Bigelow Tested by: John Bigelow ........ Merged revisions 381594 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381595 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Mark Michelson	8a7dd2f408	Fix a crash that occurred when a BYE was received on a replaced dialog. Reference counting for the channel and its tech_pvt got messed up at some point between 1.8 and 11. The result was that if a BYE for a dialog that had been replaced (via an INVITE with Replaces) was received, Asterisk would crash due to trying to access data on a channel that was no longer there. The fix I introduced is to remove code that both unrefs the sip_pvt and sets the channel's tech_pvt to NULL when an INVITE with Replaces is handled. This way when a BYE is received, the tech_pvt will be non-NULL and so the BYE can be processed and not cause a crash. (closes issue ASTERISK-20929) reported by Kristopher Lalletti patches: ASTERISK-20929.patch uploaded by Mark Michelson (License #5049) ........ Merged revisions 381566 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381568 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	e123ee2d77	Disable strict XML documentation config checking; fix crash caused by sorcery This patch does two things: 1. It disables (temporarily) strict XML documentation checking for module configurations. We should re-enable it before making any release from trunk. 2. Pass the module flag AST_MODULE through sorcery. This means several of the API calls are now macros and will do this automatically for you. The config framework needs the module that objects are registering to so it can properly construct the documentation. (This was already a required field, but sorcery was getting by without it) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381567 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kevin Harwell	71bce17720	Stopped spamming of debug messages during attended transfer. While autoservice is running and servicing a channel the callid is being stored and removed in the thread's local storage for each iteration of the thread loop. If debug was set to a sufficient level the log file would be spammed with callid thread local storage debug messages. Added a new function that checks to see if the callid to be stored is different than what is already contained (if anything). If it is different then store/replace and log, otherwise just leave as is. Also made it so all logging of debug messages pertaining to the callid thread storage outputs only when TEST_FRAMEWORK is defined. (issue ASTERISK-21014) (closes issue ASTERISK-21014) Report by: Rusty Newton Review: https://reviewboard.asterisk.org/r/2324/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381557 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Jonathan Rose	f008baddac	chan_sip: Use video and text crypto attributes to append RTP profiles to SDP Some bad copy/pasting resulted in using the audio crypto attribute for both text and video RTP. Also the audio crypto isn't set until after these, so it was really just bad all around. (closes ASTERISK-20905) Reported by: Kristopher Lalletti patches: rtp_crypto_video_text.diff uploaded by Jonathan Rose (license 6182) ........ Merged revisions 381553 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381556 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	32e8b02f8f	Remove automerge propertrties added in r381527 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381543 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	d04ab3c645	Add CLI configuration documentation This patch allows a module to define its configuration in XML in source, such that it can be parsed by the XML documentation engine. Documentation is generated in a two-pass approach: 1. The documentation is first generated from the XML pulled from the source 2. The documentation is then enhanced by the registration of configuration options that use the configuration framework This patch include configuration documentation for the following modules: * chan_motif * res_xmpp * app_confbridge * app_skel * udptl Two new CLI commands have been added: * config show help - show configuration help by module, category, and item * xmldoc dump - dump the in-memory representation of the XML documentation to a new XML file. Review: https://reviewboard.asterisk.org/r/2278 Review: https://reviewboard.asterisk.org/r/2058 patches: on review 2058 uploaded by twilson git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381527 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Damien Wedhorn	edf0483f4f	Remove extraneous stuff from r381470. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381471 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Damien Wedhorn	ce8101c6c6	Add back sending dialnumber to skinny. Don't know why it seemed to work during testing, but it really is needed for protocol v17 (and probably above). git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381470 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago

1 2 3 4 5 ...

23675 Commits (05ec2860df560477546564e07058f8f9f1e17cfc) All Branches Search

23675 Commits (05ec2860df560477546564e07058f8f9f1e17cfc)

All Branches