https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r182810 | russell | 2009-03-17 21:09:13 -0500 (Tue, 17 Mar 2009) | 44 lines
Fix cases where the internal poll() was not being used when it needed to be.
We have seen a number of problems caused by poll() not working properly on
Mac OSX. If you search around, you'll find a number of references to using
select() instead of poll() to work around these issues. In Asterisk, we've
had poll.c which implements poll() using select() internally. However, we
were still getting reports of problems.
vadim investigated a bit and realized that at least on his system, even
though we were compiling in poll.o, the system poll() was still being used.
So, the primary purpose of this patch is to ensure that we're using the
internal poll() when we want it to be used.
The changes are:
1) Remove logic for when internal poll should be used from the Makefile.
Instead, put it in the configure script. The logic in the configure
script is the same as it was in the Makefile. Ideally, we would have
a functionality test for the problem, but that's not actually possible,
since we would have to be able to run an application on the _target_
system to test poll() behavior.
2) Always include poll.o in the build, but it will be empty if AST_POLL_COMPAT
is not defined.
3) Change uses of poll() throughout the source tree to ast_poll(). I feel
that it is good practice to give the API call a new name when we are
changing its behavior and not using the system version directly in all cases.
So, normally, ast_poll() is just redefined to poll(). On systems where
AST_POLL_COMPAT is defined, ast_poll() is redefined to ast_internal_poll().
4) Change poll() in main/poll.c to be ast_internal_poll().
It's worth noting that any code that still uses poll() directly will work fine
(if they worked fine before). So, for example, out of tree modules that are
using poll() will not stop working or anything. However, for modules to work
properly on Mac OSX, ast_poll() needs to be used.
(closes issue #13404)
Reported by: agalbraith
Tested by: russell, vadim
http://reviewboard.digium.com/r/198/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@182847 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, the value of AGISIGUP was not always
honored when set on a channel.
(closes issue #13711)
Reported by: fmueller
Patches:
13711.patch uploaded by putnopvut (license 60)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@166470 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch removes the usage of AST_PBX_KEEPALIVE from res_agi. The only usage
was for the AGI command, "asyncagi break". This patch removes this feature.
Normally, a feature would not be removed like this. However, this code is
broken and usage of it will result in a memory leak.
Usage of this feature will make the AGI code return a result of
AST_PBX_KEEPALIVE. The PBX handler assumes that another thread has assumed
ownership of the channel. The channel thread will exit without destroying the
channel. Unfortunately, _no_ thread has ownership of the channel at this
point. There are a couple of serious problems here:
1) The only way to recover the caller is to issue a channel redirect. This
will work, but this will be done with a masquerade, and the old ast_channel
structure will be lost.
2) Until the channel redirect happens, there is no code servicing the channel.
That means nothing is reading audio or handling events coming from the
channel. This is very bad.
The recommended way to get this same "break" functionality is to issue the
redirect while the channel is still being handled by the AGI code. That way,
there will be no memory leak, and there will be no period of time that the
channel is not being serviced.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@166258 65c4cc65-6c06-0410-ace0-fbb531ad65f3
also, move UPGRADE.txt to UPGRADE-1.6.txt and make the new UPGRADE.txt contain information about upgrading between Asterisk 1.6 releases
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@157706 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Add CLI aliases module to asterisk.
- Remove all deprecated CLI commands from the code
Initial work done by file.
Junk-Y and lmadsen did a lot of work and testing to
get the list of deprecated commands into the configuration file.
Deprecated CLI commands are now handled by this new module,
see cli_aliases.conf for more info about that.
ok russellb@ via reviewboard
(closes issue #13735)
Reported by: mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@156120 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A new <agi> element is used to describe the XML documentation.
We have the usual synopsis,syntax,description and seealso for AGI commands.
The CLI 'agi show commands' command was changed to show all the documentation se
ctions.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@156051 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This work is done by lmadsen, junky and mvanbaak
during AstriDevCon.
This is the second audit the CLI got, and
this time lmadsen made sure he had _ALL_ modules
loaded that have CLI commands in them.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@145121 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r141028 | jpeeler | 2008-09-04 12:00:29 -0500 (Thu, 04 Sep 2008) | 7 lines
(closes issue #11979)
Fixes multiple parking problems:
Crash when executing a park on an extension dialed by AGI due to not returning the proper return code.
Crash when using a builtin feature that was a subset of a enabled dynamic feature.
Crash due to always hanging up the peer despite the fact that the peer was supposed to be parked.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@141039 65c4cc65-6c06-0410-ace0-fbb531ad65f3
an OOB message that answers the question of, if AGI no longer shuts down the
connection on hangup, how will FastAGI know when to stop processing the call?
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@136859 65c4cc65-6c06-0410-ace0-fbb531ad65f3
released, causing a deadlock. (Reported by mvanbaak in #asterisk-dev,
discovered by bbryant's change to the lock tracking code to yell at you
if a thread exits with a lock still held)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@131072 65c4cc65-6c06-0410-ace0-fbb531ad65f3
AMI commands can display that a channel is under control of an AGI.
Work inspired by work at customer site, but paid for by Edvina AB
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@128240 65c4cc65-6c06-0410-ace0-fbb531ad65f3
has been loaded, fix a return value in the loader, and ensure that the help
workhorse header does not print on load.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@120602 65c4cc65-6c06-0410-ace0-fbb531ad65f3
and off for new installations. This includes the translation from pipes to commas
for pbx_realtime and the EXEC command for AGI, as well as the change to the Set
application not to support multiple variables at once.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@120171 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- make data member of the ast_frame struct a named union instead of a void
Recently the ast_queue_hangup function got a new parameter, the hangupcause
Feedback came in that this is no good and that instead a new function should be created.
This I did.
The hangupcause was stored in the seqno member of the ast_frame struct. This is not very
elegant, and since there's already a data member that one should be used.
Problem is, this member was a void *.
Now it's a named union so it can hold a pointer, an uint32 and there's a padding in case someone
wants to store another type in there in the future.
This commit is so massive, because all ast_frame.data uses have to be
altered to ast_frame.data.data
Thanks russellb and kpfleming for the feedback.
(closes issue #12674)
Reported by: mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@117802 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114195 | tilghman | 2008-04-17 07:56:38 -0500 (Thu, 17 Apr 2008) | 8 lines
Add special case for when the agi cannot be executed, to comply with the documentation that
we return failure in that case.
(closes issue #12462)
Reported by: fmueller
Patches:
20080416__bug12462.diff.txt uploaded by Corydon76 (license 14)
Tested by: fmueller
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114196 65c4cc65-6c06-0410-ace0-fbb531ad65f3
actual problems, per se. I also added format attributes to any printf wrapper functions I found that didn't have them. -Wsecurity and -Wmissing-format-attribute added to --enable-dev-mode.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@109447 65c4cc65-6c06-0410-ace0-fbb531ad65f3
given our removal of deadagi as an actual application.
(closes issue #12161)
Reported by: explidous
Patches:
res_agi_12161.patch uploaded by juggie (license 24)
Tested by: juggie
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@106399 65c4cc65-6c06-0410-ace0-fbb531ad65f3
automatically generated file like it used to be. This still needs to be there
for modules that have to check it to compile against multiple asterisk versions.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@104244 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(closes issue #8925)
About a year ago, as Leif Madsen and Jim van Meggelen were going over the CLI
commands in Asterisk 1.4 for the next version of their book, they documented
a lot of inconsistencies. This set of changes addresses all of these issues
and has been reviewed by Leif.
While this does introduce even more changes to the CLI command structure, it
makes everything consistent, which is the most important thing.
Thanks to all that helped with this one!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@103171 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r98317 | file | 2008-01-11 15:28:30 -0400 (Fri, 11 Jan 2008) | 6 lines
If the channel is hungup during RECORD FILE send a result code of -1 to be uniform with everything else.
(closes issue #11743)
Reported by: davevg
Patches:
res_agi.diff uploaded by davevg (license 209)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@98318 65c4cc65-6c06-0410-ace0-fbb531ad65f3
revision changed, every module that used the version was getting rebuilt after
every svn update. This severly annoyed me pretty quickly, so I have improved
the situation.
Now, instead of generating version.h, main/version.c is generated. version.c
includes the version information, as well as a couple of API calls for modules
to retrieve the version. So now, only version.c will get rebuilt, and the main
asterisk binary relinked, which is must faster than rebuilding http.c, manager.c,
asterisk.c, relinking the asterisk binary, chan_sip.c, func_version.c, res_agi ...
The only minor change in behavior here is that the version information reported by
chan_sip, for example, is the version of the Asterisk core, and not necessarily the
Asterisk version that the chan_sip module came from.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@96717 65c4cc65-6c06-0410-ace0-fbb531ad65f3
build times - tested, there is no measureable difference before and
after this commit.
In this change:
use asterisk/compat.h to include a small set of system headers:
inttypes.h, unistd.h, stddef.h, stddint.h, sys/types.h, stdarg.h,
stdlib.h, alloca.h, stdio.h
Where available, the inclusion is conditional on HAVE_FOO_H as determined
by autoconf.
Normally, source files should not include any of the above system headers,
and instead use either "asterisk.h" or "asterisk/compat.h" which does it
better.
For the time being I have left alone second-level directories
(main/db1-ast, etc.).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89333 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- the *_CURRENT macros no longer need the list head pointer argument
- add AST_LIST_MOVE_CURRENT to encapsulate the remove/add operation when moving entries between lists
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89106 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r84236 | russell | 2007-10-01 14:56:28 -0500 (Mon, 01 Oct 2007) | 5 lines
Add another sanity check in the AGI read loop. We really don't care about
EAGAIN unless we didn't read an entire line. If there is a newline at the
end if the read buffer, break, because we got the whole thing.
(reported and patched by bmd)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@84237 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r82929 | russell | 2007-09-18 17:42:27 -0500 (Tue, 18 Sep 2007) | 11 lines
Add a new patch to handle interrupting the fgets() call when using FastAGI.
This version of the patch maintains the original behavior of the code when
not using FastAGI.
(closes issue #10553)
Reported by: juggie
Patches:
res_agi_fgets-4.patch uploaded by juggie (license 24)
res_agi_fgets_1.4svn.patch uploaded by juggie (license 24)
Slight mods by me
Tested by: juggie, festr
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@82931 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r82245 | russell | 2007-09-11 10:26:51 -0500 (Tue, 11 Sep 2007) | 9 lines
(closes issue #10553)
Reported by: juggie
Patches:
res_agi_fgets-2.patch uploaded by juggie (license 24)
Tested by: juggie
When using fastagi, fgets() can return before a full line is read. Add explicit
handling for the case where it gets interrupted.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@82246 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r80360 | russell | 2007-08-22 14:53:30 -0500 (Wed, 22 Aug 2007) | 5 lines
Juggie in #asterisk-dev was reporting problems where fgets would return
without reading the whole line when using fastagi. When this happens,
errno was set to EINTR or EAGAIN. This patch accounts for the possibility
and lets fgets continue in that case.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@80361 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Use a thread local ast_str for building the string that will be written out
to the console for debug, and to the FD for the AGI itself, instead of allocating
a buffer on the heap every time the function is called.
* Use the information contained within the ast_str to determine how many bytes
need to be written instead of calling strlen().
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77791 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r77788 | russell | 2007-07-30 14:13:31 -0500 (Mon, 30 Jul 2007) | 10 lines
(closes issue #10279)
Reported by: seanbright
Patches:
res_agi.carefulwrite.1.4.07252007.patch uploaded by seanbright (license 71)
res_agi.carefulwrite.trunk.07252007.patch uploaded by seanbright (license 71)
Allow the "agi_network: yes" line to be printed out in the AGI debug output.
Also, allow partial writes to be handled when writing out this line just like
it is for all of the others.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77789 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Makes the structures handling external AGI commands a bit more thread-safe
- Makes AGI transparently work with both live and hungup channels
- DeadAGI is hence no longer necessary and is deprecated
- CLI bug fixes
- Commands will refuse to run if the channel is dead and the command is nonsensical
for dead channels.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76707 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This merges the trunk only part of the patches from this issue. In 1.4, res_agi
will issue a warning if you try to use DeadAGI on a channel that is not hung up.
Now, in trunk, it just plain won't let you do it.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@75930 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Russell Bryant
Jeff Peeler
Tilghman Lesher
Mark Michelson
Eliel C. Sardanons
Kevin P. Fleming
Matthew Nicholson
Michiel van Baak
Sean Bright
Olle Johansson
Terry Wilson
Donny Kavanagh
Joshua Colp
Luigi Rizzo
Steve Murphy
Jason Parker